From edd56c01d174153bf90160279742ff6f3ad27a93 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Mon, 10 Aug 2026 10:50:21 +0300 Subject: [PATCH] iio: adc: rohm-bd79124: Fix channel initialization The alarm limit register on BD79124 span to two consecutive registers. The first register for high-limit containing also hysteresis configuration. The initialization in driver writes only one 8-bit register, overwriting the hysteresis and leaving the other limit register uninitialized. Fix the limit initialization by using the bd79124_write_int_to_reg(), which correctly initializes the limit on both of the registers. Fixes: 3f57a3b9ab74 ("iio: adc: Support ROHM BD79124 ADC") Signed-off-by: Matti Vaittinen Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/rohm-bd79124.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/rohm-bd79124.c b/drivers/iio/adc/rohm-bd79124.c index eab5286763a7..2c031a5e9eb0 100644 --- a/drivers/iio/adc/rohm-bd79124.c +++ b/drivers/iio/adc/rohm-bd79124.c @@ -919,13 +919,13 @@ static int bd79124_chan_init(struct bd79124_data *data, int channel) { int ret; - ret = regmap_write(data->map, BD79124_GET_HIGH_LIMIT_REG(channel), - BD79124_HIGH_LIMIT_MAX); + ret = bd79124_write_int_to_reg(data, BD79124_GET_HIGH_LIMIT_REG(channel), + BD79124_HIGH_LIMIT_MAX); if (ret) return ret; - return regmap_write(data->map, BD79124_GET_LOW_LIMIT_REG(channel), - BD79124_LOW_LIMIT_MIN); + return bd79124_write_int_to_reg(data, BD79124_GET_LOW_LIMIT_REG(channel), + BD79124_LOW_LIMIT_MIN); } static int bd79124_get_gpio_pins(const struct iio_chan_spec *cs, int num_channels)