diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi index 4d37d02138ad..d942ac1f7865 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi @@ -83,6 +83,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK0>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -93,6 +94,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK1>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -103,6 +105,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK2>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -113,6 +116,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK3>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -303,6 +307,32 @@ resets = <&cpg 0x30>; }; + tsu0: thermal@11000000 { + compatible = "renesas,r9a09g056-tsu", "renesas,r9a09g047-tsu"; + reg = <0 0x11000000 0 0x1000>; + interrupts = , + ; + interrupt-names = "adi", "adcmpi"; + clocks = <&cpg CPG_MOD 0x109>; + resets = <&cpg 0xf7>; + power-domains = <&cpg>; + #thermal-sensor-cells = <0>; + renesas,tsu-trim = <&sys 0x320>; + }; + + tsu1: thermal@14002000 { + compatible = "renesas,r9a09g056-tsu", "renesas,r9a09g047-tsu"; + reg = <0 0x14002000 0 0x1000>; + interrupts = , + ; + interrupt-names = "adi", "adcmpi"; + clocks = <&cpg CPG_MOD 0x10a>; + resets = <&cpg 0xf8>; + power-domains = <&cpg>; + #thermal-sensor-cells = <0>; + renesas,tsu-trim = <&sys 0x330>; + }; + xspi: spi@11030000 { compatible = "renesas,r9a09g056-xspi", "renesas,r9a09g047-xspi"; reg = <0 0x11030000 0 0x10000>, @@ -1403,6 +1433,51 @@ snps,blen = <16 8 4 0 0 0 0>; }; + thermal-zones { + sensor1_thermal: sensor1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&tsu0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor2_thermal: sensor2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&tsu1>; + + cooling-maps { + map0 { + trip = <&sensor2_target>; + cooling-device = <&cpu0 0 3>, <&cpu1 0 3>, + <&cpu2 0 3>, <&cpu3 0 3>; + contribution = <1024>; + }; + }; + + trips { + sensor2_target: trip-point { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = ,