kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-14 05:55:17 +00:00
Code Issues Releases Packages Activity

STM32 DT updates for v5.11, round 1

Browse source 
Highlights:
 ----------
 
 MCU part:
  -Fix dmamux reg property (length) on stm32h743.
  -Explicitly set DCMI bus type on stm32429i eval board.
 
 MPU part:
  -Enable FIFO mode with half-full threshold for DCMI.
  -Harmonize EHCI/OHCI nodes.
  -Move SDMMC IP version to v2.0 to get features improvements.
  -Add LP-timer wakeup support.
  -Enable crypto/hash/crc support.
  -Explicitly set DCMI bus type on stm32mp157 eval board.
  -Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
   (It is connected to I2C4).
  -Fix dmamux reg property (length) on stm32mp151.
  -Optimize USB OTG FIFO sizes on stm32mp151.
  -Declare tamp node also as "simple-mfd".
 
  -LXA:
   -Document Octavo vendor-prefixes yaml file.
   -Document lxa,stm32mp157c-mc1 in STM32 yaml file.
 
  -DH:
   -Connect PHY IRQ line on DH SoM.
   -Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
   -Document all DH compatible strings in STM32 yaml file.
   -Add DHCOM based PicoITX board. This board embedds ethernet port,
    USB, CAN LEDS and a custom board-to-board connector.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAl/Au8MdHGFsZXhhbmRy
 ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIXyEw//WdCcKbynDRO0GjK3
 sFIAHUBLKt4vZJRD7M5jWojKgcdggl/kaY/k5Us2hr2eLRK0yEG76njIcMEHElxz
 rUnEOcnJ7z0qAXZkaTCbvs/5cLybHEyAfEAl+V4fGPYO0CuJrGKpqz6cliU40VJq
 vWcn7hFhS7wf3bFmJgUeW36mTbBJVFD4xqvdN6ZCV3VeClqCdln7VVz3QcYEU0RW
 7TcJVuvsmBOUseprmzXnTLCiEEG28Y7TexoJgAlwPvcKUlA4RGT8+cvibObTyTN6
 Gvprpgm90M2Lp7RvnHQJ043o6rvu0tKjzHDxr2XIZw4uiwMwn8xtKNJUFiOCMjP4
 YwTGbO1FcDFDGoWoRcFwglJSpSxBxnbFwgmdMYXoIQuJv9wv1AdFQgSknxtJzxTs
 0waE0WY5+YLGFRt4x/tXoP/VCg/U4xbPXc/zOGMZwjHfZXzZyuLVj/Y2uXM2WRZZ
 EUCfsNUQGX460M1MF2ap2d0sI3q6WI1223dIB7bO+QN03gCLoCZ6Rhqb/JJXODu6
 Nm5g5byg4Ov7p4znvAIYbGkcrqecS0YjVM1Lq6gbWV/pgjiNwkjgMuVw7AYND01u
 J7UWvGvJevAIfitCJTG8U66jbY+BKJQsbjHA3x1zOp7F/SnQM3jFIRgKUfrB2kd9
 wPdXEthFxOFTdeyAy994NO8XTJc=
 =O+Lk
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.11, round 1

Highlights:
----------

MCU part:
 -Fix dmamux reg property (length) on stm32h743.
 -Explicitly set DCMI bus type on stm32429i eval board.

MPU part:
 -Enable FIFO mode with half-full threshold for DCMI.
 -Harmonize EHCI/OHCI nodes.
 -Move SDMMC IP version to v2.0 to get features improvements.
 -Add LP-timer wakeup support.
 -Enable crypto/hash/crc support.
 -Explicitly set DCMI bus type on stm32mp157 eval board.
 -Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
  (It is connected to I2C4).
 -Fix dmamux reg property (length) on stm32mp151.
 -Optimize USB OTG FIFO sizes on stm32mp151.
 -Declare tamp node also as "simple-mfd".

 -LXA:
  -Document Octavo vendor-prefixes yaml file.
  -Document lxa,stm32mp157c-mc1 in STM32 yaml file.

 -DH:
  -Connect PHY IRQ line on DH SoM.
  -Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
  -Document all DH compatible strings in STM32 yaml file.
  -Add DHCOM based PicoITX board. This board embedds ethernet port,
   USB, CAN LEDS and a custom board-to-board connector.

* tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
  ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles
  dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1
  dt-bindings: vendor-prefixes: document Octavo Systems oct prefix
  ARM: dts: stm32: Add DHCOM based PicoITX board
  dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards
  ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon
  dt-bindings: arm: stm32: add simple-mfd compatible for tamp node
  ARM: dts: stm32: update stm32mp151 for remote proc synchronization support
  ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151
  ARM: dts: stm32: fix dmamux reg property on stm32h743
  ARM: dts: stm32: fix dmamux reg property on stm32mp151
  ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151
  ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
  dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
  dt-bindings: connector: add typec-power-opmode property to usb-connector
  ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl
  ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board
  ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board
  ARM: dts: stm32: enable CRYP by default on stm32mp15
  ARM: dts: stm32: enable CRC1 by default on stm32mp15
  ...

Link: https://lore.kernel.org/r/873c17a5-28d5-9261-f691-1b917611c932@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2020-11-27 18:00:07 +01:00
commit fcc3e3c3a4
20 changed files with 534 additions and 38 deletions
Download patch file Download diff file Expand all files Collapse all files