x86/PCI: Add support for the SiS85C497 PIRQ router

Browse source

The SiS 85C496/497 486 Green PC VESA/ISA/PCI Chipset has support for PCI 
steering and the ELCR register implemented.  These features are handled 
by the SiS85C497 AT Bus Controller & Megacell (ATM) ISA bridge, however 
the device is wired as a peer bridge directly to the host bus and has 
its PCI configuration registers decoded at addresses 0x80-0xff by the 
accompanying SiS85C496 PCI & CPU Memory Controller (PCM) host bridge[1].  
Therefore we need to match on the host bridge's vendor and device ID.

Like with the SiS85C503 PIRQ router handle link value ranges of 1-4 and 
0xc0-0xc3, corresponding respectively to PIRQ line numbers counted from 
1 and link register PCI configuration space addresses.

References:

[1]  "486 Green PC VESA/ISA/PCI Chipset, SiS 85C496/497", Rev 3.0,
     Silicon Integrated Systems Corp., July 1995, Part IV, Section 3. 
     "PCI Configuration Space Registers (00h ~ FFh)", p. 114

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikolai Zhubr <zhubr.2@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301610490.22465@angie.orcam.me.uk

...

This commit is contained in:

Maciej W. Rozycki 2022-03-31 08:10:46 +01:00 • committed by Thomas Gleixner

parent 5a0e5fa957

commit fe62bc2362

1 changed files with 80 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

80

arch/x86/pci/irq.c

View file