1st set of IIO fixes for 6.6

Note last minute rebase to fix up a stale Fixes tag. All patches have been
 in Linux-next for some time.
 
 adi,ad3552r
  - Fix swapped device IDs for the two parts that are supported.
 adi,ad7192
  - Use the right reference voltage source.
 adi,ad7292
  - Fix additionalProperties to be false, not true.
 adi,ad74413
  - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
 adi,admv1013
  - Fix up some corner cases for the mixer vgate register value.
 bosch,bmp280
  - Fix a null pointer dereference caused by a wrong boolean operator.
 bosch,bno055
  - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
 freescale,imx8eqxp
  - Fix some wrong register addresses.
 google,cros_ec
  - Fix a use after free if very badly timed buffer disable occurs by
    holding the device in buffered mode.
 infineon,dps310
  - Expand a timeout so we don't hit it on working parts.
 meas,m5611
  - Allow for a ROM CRC of 0 as it is a valid value and there are devices
    out there where it happens.
 murata,irsd200
  - Make sure the buffer used to build up the scan is large enough to take
    the timestamp.
 rohm,bu27010 binding
  - Add a missing required vdd-supply
 vishay,vcnl4000
  - Don't power down chip in wrong place.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmUe7+ARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foh+aw//SwJDFjmMXNsDP6IALeiAwucGvyTHk39v
 P7IkhK19kKO0jbdBkCXCweR3gDhKwqGzUHFTQJfro0qd5QnNAVABulYsHVLCychb
 gXb/wPozigUmEF/Gg2TfMbWwyJNTMpQ557nJmVL/mF5VfNzMd++KzJkt01hNfBKu
 UrnTc2m3NXhA3DRFcSVf3bWE9eTdngKVd08VgWBX32HIQ5BSE5xh3SuB9LHMW0i4
 sBkUaWGB5Y+XB6zVpFmey5FzTQHLEXzuLSEXZzNEVZn3u//dfidTPXNuovvjUlGN
 6z51B40dFWd6I/6K5BvHZinNaW3BGe3WDTWZOc849ceZwMGfKQFqT5v+H4m0+R+6
 g51k5zXHObBejoFoT/X0NaNF9mM3rdiTWg0Y5falooaLtbqL88GRGGe9DsmvBFTL
 vwP5bHU8SX8sgQ4odyMhIXN3cXbh4X2ER0rrDXYkau+lR6teTVqDITK3val5xaqW
 FGtiALL00yW1OYYcEDmYdLg3o60PF3Pn4SppY4mBeLuC9J28wi7PHU5dnLtxZXSJ
 R96TNSxsT6+0M2/9nM1I8uwWk2FpuzYJ7X07E6U2KaW7kj6zNpx6KlzQ2cndF+A5
 4CGI+mLhhhBlBdDyCEjOU5cVaG2ARj2UVTst6N7XfsvLbs2igoAn2FQIh5mrkY6r
 JT2iIDf4hhI=
 =+NT7
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

Jonathan writes:

1st set of IIO fixes for 6.6

Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.

adi,ad3552r
 - Fix swapped device IDs for the two parts that are supported.
adi,ad7192
 - Use the right reference voltage source.
adi,ad7292
 - Fix additionalProperties to be false, not true.
adi,ad74413
 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
 - Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
 - Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
 - Fix some wrong register addresses.
google,cros_ec
 - Fix a use after free if very badly timed buffer disable occurs by
   holding the device in buffered mode.
infineon,dps310
 - Expand a timeout so we don't hit it on working parts.
meas,m5611
 - Allow for a ROM CRC of 0 as it is a valid value and there are devices
   out there where it happens.
murata,irsd200
 - Make sure the buffer used to build up the scan is large enough to take
   the timestamp.
rohm,bu27010 binding
 - Add a missing required vdd-supply
vishay,vcnl4000
 - Don't power down chip in wrong place.

* tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
  dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  iio: adc: ad7192: Correct reference voltage
  iio: light: vcnl4000: Don't power on/off chip in config
  iio: addac: Kconfig: update ad74413r selections
  iio: pressure: dps310: Adjust Timeout Settings
  iio: imu: bno055: Fix missing Kconfig dependencies
  iio: adc: imx8qxp: Fix address for command buffer registers
  iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
  dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
  iio: admv1013: add mixer_vgate corner cases
  iio: pressure: bmp280: Fix NULL pointer exception
  iio: dac: ad3552r: Correct device IDs
This commit is contained in:
Greg Kroah-Hartman 2023-10-06 16:58:28 +02:00
commit ffd1f150ff
14 changed files with 51 additions and 22 deletions