Commit graph

388,417 commits

Author SHA1 Message Date
Peter Hurley
a6e54319a7 n_tty: Untangle read completion variables
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:55:19 -07:00
Peter Hurley
f6c8dbe6e5 n_tty: Encapsulate minimum_to_wake within N_TTY
minimum_to_wake is unique to N_TTY processing, and belongs in
per-ldisc data.

Add the ldisc method, ldisc_ops::fasync(), to notify line disciplines
when signal-driven I/O is enabled or disabled. When enabled for N_TTY
(by fcntl(F_SETFL, O_ASYNC)), blocking reader/polls will be woken
for any readable input. When disabled, blocking reader/polls are not
woken until the read buffer is full.

Canonical mode (L_ICANON(tty), n_tty_data::icanon) is not affected by
the minimum_to_wake setting.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:55:11 -07:00
Tony Lindgren
a630fbfbb1 serial: omap: Fix device tree based PM runtime
In the runtime_suspend function pdata is not being used, and
also blocks the function in device tree based booting. Fix it
by removing the unused pdata from the runtime_suspend function.

Further, context loss count is not being passed in pdata, so
let's just reinitialize the port every time for those case.
This can be further optimized later on for the device tree
case by adding detection for the hardware state and possibly
by adding a driver specific autosuspend timeout.

And doing this, we can then make the related dev_err into a
dev_dbg message instead of an error.

In order for the wake-up events to work, we also need to set
autosuspend_timeout to -1 if 0, and also device_init_wakeup()
as that's not being done by the platform init code for the
device tree case.

Note that this does not affect legacy booting, and in fact
might make it work for the cases where the context loss info
is not being passed in pdata.

Thanks to Kevin Hilman <khilman@linaro.org> for debugging
and suggesting fixes for the autosuspend_timeout and
device_init_wakeup() related initializiation.

Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:49:44 -07:00
Fabio Estevam
80c48497f2 serial: imx: Fix serial clock unbalance
Since commit 0c375501 (serial: imx: enable the clocks for console), the
imx_startup() function calls clk_prepare_enable conditionally, so we
need to call clk_disable_unprepare inside imx_shutdown() under the same
condition to avoid unbalanced clock calls.

This avoids the following warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 70 at drivers/clk/clk.c:780 __clk_disable+0x68/0x84()
Modules linked in:
CPU: 0 PID: 70 Comm: mountall Not tainted 3.10.0-rc4-next-20130607+ #435
Backtrace:
[<800116a4>] (dump_backtrace+0x0/0x10c) from [<80011844>] (show_stack+0x18/0x1c)
 r6:8069f4e8 r5:0000030c r4:00000000 r3:00000000
[<8001182c>] (show_stack+0x0/0x1c) from [<8053bce0>] (dump_stack+0x78/0x94)
[<8053bc68>] (dump_stack+0x0/0x94) from [<80023df8>] (warn_slowpath_common+0x6c/0x8c)
 r4:00000000 r3:00000000
[<80023d8c>] (warn_slowpath_common+0x0/0x8c) from [<80023e3c>] (warn_slowpath_null+0x24/0x2c)
 r8:bf2ed008 r7:bfaa9810 r6:000f0013 r5:bf824b80 r4:bf824b80
[<80023e18>] (warn_slowpath_null+0x0/0x2c) from [<8041af84>] (__clk_disable+0x68/0x84)
[<8041af1c>] (__clk_disable+0x0/0x84) from [<8041b098>] (clk_disable+0x20/0x2c)
 r4:600f0013 r3:00000001
[<8041b078>] (clk_disable+0x0/0x2c) from [<802c93e8>] (imx_shutdown+0xbc/0xec)
 r5:bf824b80 r4:bfaa9810
[<802c932c>] (imx_shutdown+0x0/0xec) from [<802c63a0>] (uart_port_shutdown+0x34/0x40)
 r5:bf86f860 r4:bfaa9810
[<802c636c>] (uart_port_shutdown+0x0/0x40) from [<802c68c0>] (uart_shutdown+0x98/0xc4)
 r4:bf86f800 r3:00000000
[<802c6828>] (uart_shutdown+0x0/0xc4) from [<802c7514>] (uart_close+0x5c/0x198)
 r7:bfaa9810 r6:bf274400 r5:bf86f86c r4:bf86f800
[<802c74b8>] (uart_close+0x0/0x198) from [<802ac648>] (tty_release+0xf8/0x500)
[<802ac550>] (tty_release+0x0/0x500) from [<800c5a30>] (__fput+0x9c/0x208)
[<800c5994>] (__fput+0x0/0x208) from [<800c5bac>] (____fput+0x10/0x14)
[<800c5b9c>] (____fput+0x0/0x14) from [<80040234>] (task_work_run+0xb4/0xec)
[<80040180>] (task_work_run+0x0/0xec) from [<80029238>] (do_exit+0x2b0/0x920)
 r8:8000e144 r7:000000f8 r6:bf306300 r5:00000000 r4:bfac1180
[<80028f88>] (do_exit+0x0/0x920) from [<80029a4c>] (do_group_exit+0x50/0xd4)
 r7:000000f8
[<800299fc>] (do_group_exit+0x0/0xd4) from [<80029ae8>] (__wake_up_parent+0x0/0x28)
 r7:000000f8 r6:00000001 r5:0006f7ae r4:0006f79a
[<80029ad0>] (SyS_exit_group+0x0/0x18) from [<8000dfc0>] (ret_fast_syscall+0x0/0x30)
---[ end trace 16d080eb7efea4e9 ]---

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:49:43 -07:00
Matteo Facchinetti
8a29dfb8b6 serial/mpc52xx_uart: fix kernel panic when system reboot
This bug appear when a second PSC based driver appends an interrupt
routine to the FIFO controller shared interrupt (like spi-mpc512x-psc).
When reboot, uart_shutdown() remove the serial console interrupt handler
while spi-mpc512x-psc isr is still activate and cause the following kernel
panic:

The system is going down for reboot NOW!rpc (ttyPSC0) (Mon Jun 10 12:26:07 20
INIT: Sending processirq 40: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-rc4-next-20130607-00001-ga0bceb3-dirty #5
Call Trace:
[cfff9f00] [c0007910] show_stack+0x48/0x150 (unreliable)
[cfff9f40] [c005ae60] __report_bad_irq.isra.6+0x34/0xe0
[cfff9f60] [c005b194] note_interrupt+0x214/0x26c
[cfff9f90] [c00590fc] handle_irq_event_percpu+0xd0/0x1bc
[cfff9fd0] [c005921c] handle_irq_event+0x34/0x54
[cfff9fe0] [c005b8f4] handle_level_irq+0x90/0xf4
[cfff9ff0] [c000cb98] call_handle_irq+0x18/0x28
[c050dd60] [c000575c] do_IRQ+0xcc/0x124
[c050dd90] [c000eb04] ret_from_except+0x0/0x14

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:49:43 -07:00
Feng Tang
fcd2bb9b5d serial: mfd: Add sysrq support
When using MFD HSU based console, sometime we need the sysrq function
to help debugging kernel. The sysrq code is basically there, this
patch just simply enable it.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:49:43 -07:00
Peter Hurley
7c61c3d8f4 tty: Fix transient pty write() EIO
Commit 699390354d
('pty: Ignore slave pty close() if never successfully opened')
introduced a bug with ptys whereby a write() in parallel with an
open() on an existing pty could mistakenly indicate an I/O error.

Only indicate an I/O error if the condition on open() actually exists.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Cc: stable <stable@vger.kernel.org> # 3.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:37:29 -07:00
Ross Lagerwall
ef223fb3d1 tty/vt: Return EBUSY if deallocating VT1 and it is busy
Commit 421b40a628 ("tty/vt: Fix vc_deallocate() lock order") changed
the behavior when deallocating VT 1.  Previously if trying to
deallocate VT1 and it is busy, we would return EBUSY.  The commit
changed this to return 0 (success).

This commit restores the old behavior.

Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:37:29 -07:00
Konrad Rzeszutek Wilk
8e3f875554 xen/blkback: Check for insane amounts of request on the ring (v6).
Check that the ring does not have an insane amount of requests
(more than there could fit on the ring).

If we detect this case we will stop processing the requests
and wait until the XenBus disconnects the ring.

The existing check RING_REQUEST_CONS_OVERFLOW which checks for how
many responses we have created in the past (rsp_prod_pvt) vs
requests consumed (req_cons) and whether said difference is greater or
equal to the size of the ring, does not catch this case.

Wha the condition does check if there is a need to process more
as we still have a backlog of responses to finish. Note that both
of those values (rsp_prod_pvt and req_cons) are not exposed on the
shared ring.

To understand this problem a mini crash course in ring protocol
response/request updates is in place.

There are four entries: req_prod and rsp_prod; req_event and rsp_event
to track the ring entries. We are only concerned about the first two -
which set the tone of this bug.

The req_prod is a value incremented by frontend for each request put
on the ring. Conversely the rsp_prod is a value incremented by the backend
for each response put on the ring (rsp_prod gets set by rsp_prod_pvt when
pushing the responses on the ring).  Both values can
wrap and are modulo the size of the ring (in block case that is 32).
Please see RING_GET_REQUEST and RING_GET_RESPONSE for the more details.

The culprit here is that if the difference between the
req_prod and req_cons is greater than the ring size we have a problem.
Fortunately for us, the '__do_block_io_op' loop:

	rc = blk_rings->common.req_cons;
	rp = blk_rings->common.sring->req_prod;

	while (rc != rp) {

		..
		blk_rings->common.req_cons = ++rc; /* before make_response() */

	}

will loop up to the point when rc == rp. The macros inside of the
loop (RING_GET_REQUEST) is smart and is indexing based on the modulo
of the ring size. If the frontend has provided a bogus req_prod value
we will loop until the 'rc == rp' - which means we could be processing
already processed requests (or responses) often.

The reason the RING_REQUEST_CONS_OVERFLOW is not helping here is
b/c it only tracks how many responses we have internally produced
and whether we would should process more. The astute reader will
notice that the macro RING_REQUEST_CONS_OVERFLOW provides two
arguments - more on this later.

For example, if we were to enter this function with these values:

       	blk_rings->common.sring->req_prod =  X+31415 (X is the value from
		the last time __do_block_io_op was called).
        blk_rings->common.req_cons = X
        blk_rings->common.rsp_prod_pvt = X

The RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, blk_rings->common.req_cons)
is doing:

	req_cons - rsp_prod_pvt >= 32

Which is,
	X - X >= 32 or 0 >= 32

And that is false, so we continue on looping (this bug).

If we re-use said macro RING_REQUEST_CONS_OVERFLOW and pass in the rp
instead (sring->req_prod) of rc, the this macro can do the check:

     req_prod - rsp_prov_pvt >= 32

Which is,
       X + 31415 - X >= 32 , or 31415 >= 32

which is true, so we can error out and break out of the function.

Unfortunatly the difference between rsp_prov_pvt and req_prod can be
at 32 (which would error out in the macro). This condition exists when
the backend is lagging behind with the responses and still has not finished
responding to all of them (so make_response has not been called), and
the rsp_prov_pvt + 32 == req_cons. This ends up with us not being able
to use said macro.

Hence introducing a new macro called RING_REQUEST_PROD_OVERFLOW which does
a simple check of:

    req_prod - rsp_prod_pvt > RING_SIZE

And with the X values from above:

   X + 31415 - X > 32

Returns true. Also not that if the ring is full (which is where
the RING_REQUEST_CONS_OVERFLOW triggered), we would not hit the
same condition:

   X + 32 - X > 32

Which is false.

Lets use that macro.
Note that in v5 of this patchset the macro was different - we used an
earlier version.

Cc: stable@vger.kernel.org
[v1: Move the check outside the loop]
[v2: Add a pr_warn as suggested by David]
[v3: Use RING_REQUEST_CONS_OVERFLOW as suggested by Jan]
[v4: Move wake_up after kthread_stop as suggested by Jan]
[v5: Use RING_REQUEST_PROD_OVERFLOW instead]
[v6: Use RING_REQUEST_PROD_OVERFLOW - Jan's version]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>

gadsa
2013-06-17 15:17:16 -04:00
Jan Beulich
8d9256906a xen/io/ring.h: new macro to detect whether there are too many requests on the ring
Backends may need to protect themselves against an insane number of
produced requests stored by a frontend, in case they iterate over
requests until reaching the req_prod value. There can't be more
requests on the ring than the difference between produced requests
and produced (but possibly not yet published) responses.

This is a more strict alternative to a patch previously posted by
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-17 15:17:15 -04:00
Greg Kroah-Hartman
1508124d8a Merge 3.10-rc6 into usb-next
We want the fixes in this branch as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:02:38 -07:00
Greg Kroah-Hartman
bf32d52c45 Merge 3.10-rc6 into tty-next
We want the changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:00:22 -07:00
Greg Kroah-Hartman
72992bc1fd Merge 3.10-rc6 into staging-next
We want the fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 11:57:00 -07:00
Greg Kroah-Hartman
0e496b8e84 Merge 3.10-rc6 into char-misc-next
We want the fixes in here.
2013-06-17 11:54:25 -07:00
Alexey Khoroshilov
e049ca5e85 [media] staging/media: lirc_imon: fix leaks in imon_probe()
Error handling of usb_submit_urb() is not as all others in imon_probe().
It just unlocks mutexes and returns nonzero leaving all already
allocated resources unfreed.
The patch makes sure all the resources are deallocated.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17 15:52:20 -03:00
Larry Finger
c4d827c5cc rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND
This is a new device for this driver.

Reported-by: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Tobias Kluge <zielscheibe@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:54 -04:00
Rafał Miłecki
e570bd0472 ssb: add struct for serial flash
This data allow writing for example MTD driver.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:54 -04:00
Rafał Miłecki
4a71053ec5 bcma: use const for serial flash hardware table
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:53 -04:00
Rafał Miłecki
39cd206c81 ssb: use const for serial flash hardware table
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:53 -04:00
Rafał Miłecki
972da7ec49 bcma: update core (en|dis)abling functions
Broadocm updated their code, this may be needed for newer hardware or
some corner cases.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:53 -04:00
Sujith Manoharan
55fee98a6e ath9k: Fix ANI for AP mode
The commit "ath9k: Fix ANI monitoring" reverted an earlier
commit that adjusted ANI to improve performance. But, this causes
adverse effects in AP mode (as reported by Felix based on an OpenWrt
report). Use the older INI/period configuration for now until more
testing is done.

Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:52 -04:00
Sujith Manoharan
bac76a3d07 ath9k: Fix LNA gpio for AR9485
The commit "ath9k: Add custom parameters for CUS198" didn't
pass the correct gpio value to ath9k_hw_cfg_output(). Fix it.

Reported-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:52 -04:00
Daniel Drake
6390d88529 mwifiex: fix memory corruption when unsetting multicast list
When trying to unset a previously-set multicast list (i.e. the new list
has 0 entries), mwifiex_set_multicast_list() was calling down to
mwifiex_request_set_multicast_list() while leaving
mcast_list.num_multicast_addr as an uninitialized value.

We were arriving at mwifiex_cmd_mac_multicast_adr() which would then
proceed to do an often huge memcpy of
mcast_list.num_multicast_addr*ETH_ALEN bytes, causing memory corruption
and hard to debug crashes.

Fix this by setting mcast_list.num_multicast_addr to 0 when no multicast
list is provided. Similarly, fix up the logic in
mwifiex_request_set_multicast_list() to unset the multicast list that
was previously sent to the hardware in such cases.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:51 -04:00
Avinash Patil
3c68ef5b22 mwifiex: Add module parameter for regdomain
Allow a regulatory domain country code to be specified at boot
using a module argument.  This overrides the firmware regulatory
mode.

This patch also enables uAP to operate in 11a mode with hostapd.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17 14:38:51 -04:00
Gianluca Gennari
a908eb9936 [media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner
As suggested by Antti, this patch replaces:
https://patchwork.kernel.org/patch/2649861/
The buffer overflow is fixed by reading only the r820t ID register.

Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17 15:25:34 -03:00
Girish K S
1e8f5f761c ahci: sata: add support for exynos5440 sata
This patch adds the compatible string of the exynos5440 sata controller
compliant with the ahci 1.3 and sata 3.0 specification.

changes in v2:
		changed the compatible string by adding the actual IP
owners name instead of the SoC vendor name.

Signed-off-by: Girish K S <ks.giri@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-17 11:23:05 -07:00
John W. Linville
722a300bf8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2013-06-17 13:44:01 -04:00
Barry Song
85529d14d5 MAINTAINERS: ARM: SIRF: add the source code tree path
I got an account "baohua" from kernel.org and I'll use this tree
to maintain CSR SoCs stuff:
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-17 10:19:47 -07:00
Padmavathi Venna
0abb6aeacc ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
This patch corrects the base address of pinctrl_3 on Exynos5250
platform.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-17 10:06:17 -07:00
Doug Anderson
5a68e7a748 pinctrl: exynos: ack level-triggered interrupts before unmasking
A level-triggered interrupt should be acked after the interrupt line
becomes inactive and before it is unmasked, or else another interrupt
will be immediately triggered.  Acking before or after calling the
handler is not enough.

Signed-off-by: Luigi Semenzato <semenzato@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 18:58:16 +02:00
Doug Anderson
b75e60d615 MAINTAINERS: Add Samsung pinctrl entries
It's convenient if get_maintainer suggests sending samsung/exynos
pinctrl changes to linux-samsung-soc and to Tomasz and Thomas.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 18:34:48 +02:00
Arnd Bergmann
f472deadd5 pinctrl: export pinctrl_pm_select_*_state
The three functions pinctrl_pm_select_default_state,
pinctrl_pm_select_sleep_state, and pinctrl_pm_select_idle_state
are used in drivers that can be loadable modules, and should
be exported.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 18:29:32 +02:00
Mark Brown
84bbc4aa2d Merge remote-tracking branch 'asoc/topic/x86' into asoc-next 2013-06-17 17:20:33 +01:00
Mark Brown
5464389755 Merge remote-tracking branch 'asoc/topic/wm8994' into asoc-next 2013-06-17 17:20:32 +01:00
Mark Brown
f57019aa0a Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-next 2013-06-17 17:20:32 +01:00
Mark Brown
7daf390b8b Merge remote-tracking branch 'asoc/topic/wm0010' into asoc-next 2013-06-17 17:20:31 +01:00
Mark Brown
458bcee95d Merge remote-tracking branch 'asoc/topic/ux500' into asoc-next 2013-06-17 17:20:30 +01:00
Mark Brown
93d4c1e04f Merge remote-tracking branch 'asoc/topic/tegra' into asoc-next 2013-06-17 17:20:30 +01:00
Mark Brown
bfe617d33d Merge remote-tracking branch 'asoc/topic/ssm2518' into asoc-next 2013-06-17 17:20:29 +01:00
Mark Brown
5f5eb4efe5 Merge remote-tracking branch 'asoc/topic/spear' into asoc-next 2013-06-17 17:20:28 +01:00
Mark Brown
d238ffabc5 Merge remote-tracking branch 'asoc/topic/spdif' into asoc-next 2013-06-17 17:20:28 +01:00
Mark Brown
0c5f45065c Merge remote-tracking branch 'asoc/topic/sn95031' into asoc-next 2013-06-17 17:20:27 +01:00
Mark Brown
14345a5898 Merge remote-tracking branch 'asoc/topic/sgtl5000' into asoc-next 2013-06-17 17:20:27 +01:00
Mark Brown
1ee9271d67 Merge remote-tracking branch 'asoc/topic/samsung' into asoc-next 2013-06-17 17:20:26 +01:00
Mark Brown
60790c5735 Merge remote-tracking branch 'asoc/topic/rt5640' into asoc-next 2013-06-17 17:20:25 +01:00
Mark Brown
3843e87ebd Merge remote-tracking branch 'asoc/topic/pxa' into asoc-next 2013-06-17 17:20:25 +01:00
Mark Brown
b2d34a822b Merge remote-tracking branch 'asoc/topic/omap' into asoc-next 2013-06-17 17:20:24 +01:00
Mark Brown
c76a507bfe Merge remote-tracking branch 'asoc/topic/mxs' into asoc-next 2013-06-17 17:20:23 +01:00
Mark Brown
ff868b2296 Merge remote-tracking branch 'asoc/topic/max98090' into asoc-next 2013-06-17 17:20:23 +01:00
Mark Brown
6502737276 Merge remote-tracking branch 'asoc/topic/kirkwood' into asoc-next 2013-06-17 17:20:22 +01:00