ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 6df5b34949 ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-10-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: a09b817c8b ("interconnect: qcom: Add SM8150 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-9-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: b5d2f74107 ("interconnect: qcom: Add sdm845 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-7-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 46bdcac533 ("interconnect: qcom: Add SC7280 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-3-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 2d1f95ab9f ("interconnect: qcom: Add SC7180 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-2-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 1f51339f7d ("interconnect: qcom: Add QDU1000/QRU1000 interconnect driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-1-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
QCM2290 can support two memory configurations: single-channel, 32-bit
wide LPDDR3 @ up to 933MHz (bus clock) or dual-channel, 16-bit wide
LPDDR4X @ up to 1804 MHz. The interconnect driver in its current form
seems to gravitate towards the first one, however there are no LPDDR3-
equipped boards upstream and we still don't have a great way to discern
the DDR generations on the kernel side.
To make DDR scaling possible on the only currently-supported 2290
board, stick with the LPDDR4X config by default. The side effect on any
potential LPDDR3 board would be that the requested bus clock rate is
too high (but still capped to the firmware-configured FMAX).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-7-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
If this hardware couldn't get messier, some nodes are supposed to drive
their own bus clock.. Presumably to connect to some intermediate
interface between the node itself and the bus it's (supposed to be)
connected to.
Expand the node struct with the necessary data and hook up the
allocations & calculations.
Note that the node-specific AB/IB coefficients contribute (by design)
to both the node-level and the bus-level aggregation.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-3-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Presumably due to the hardware being so complex, some nodes (or busses)
have different (usually higher) requirements for bandwidth than what
the usual calculations would suggest.
Looking at the available downstream files, it seems like AB values are
adjusted per-bus and IB values are adjusted per-node.
With that in mind, introduce percentage-based coefficient struct members
and use them in the calculations.
One thing to note is that the IB coefficient is inverse (100/ib_percent)
which feels a bit backwards, but it's necessary for precision..
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-1-c04b60caa467@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This series introduces interconnect debugfs files that support voting
for any interconnect path the framework supports. It is useful for debug,
test and verification.
* icc-debugfs
debugfs: Add write support to debugfs_create_str()
interconnect: Reintroduce icc_get()
interconnect: Add debugfs test client
Link: https://lore.kernel.org/r/20230807142914.12480-1-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It's often useful during test, debug, and development to issue path
votes from shell. Add a debugfs client for this purpose.
Example usage:
cd /sys/kernel/debug/interconnect/test-client/
# Configure node endpoints for the path from CPU to DDR on
# qcom/sm8550.
echo chm_apps > src_node
echo ebi > dst_node
# Get path between src_node and dst_node. This is only
# necessary after updating the node endpoints.
echo 1 > get
# Set desired BW to 1GBps avg and 2GBps peak.
echo 1000000 > avg_bw
echo 2000000 > peak_bw
# Vote for avg_bw and peak_bw on the latest path from "get".
# Voting for multiple paths is possible by repeating this
# process for different nodes endpoints.
echo 1 > commit
Allowing userspace to directly enable and set bus rates can be dangerous
So, following in the footsteps of the regmap [0] and clk [1] frameworks,
keep these userspace controls compile-time disabled without Kconfig
options to enable them. Enabling this will require code changes to
define INTERCONNECT_ALLOW_WRITE_DEBUGFS.
[0] commit 09c6ecd394 ("regmap: Add support for writing to regmap registers via debugfs")
[1] commit 37215da555 ("clk: Add support for setting clk_rate via debugfs")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20230807142914.12480-4-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The original icc_get() that took integer node IDs was removed due to
lack of users. Reintroduce a new version that takes string node names,
which is needed for the debugfs client.
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20230807142914.12480-3-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
BCMs with an enable_mask expect to only have that specific value written
to them. The current implementation only works by miracle for BCMs with
enable mask == BIT(0), as the minimal vote we've been using so far just
so happens to be equal to that.
Use the correct value with keepalive voting.
Fixes: d8630f050d ("interconnect: qcom: Add support for mask-based BCMs")
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-2-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
We don't need all the complex arithmetic for BCMs utilizing enable_mask,
as all we need to do is to determine whether there's any user (or
keepalive) asking for it to be on.
Separate the logic for such BCMs for a small speed boost.
Suggested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-1-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Enable sync_state on sm8450 so that the interconnect votes actually mean
anything and aren't just pinned to INT_MAX.
Fixes: fafc114a46 ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_syncstate-v1-1-69ae5552a18b@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct icc_onecell_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Georgi Djakov <djakov@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230817204215.never.916-kees@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct icc_path.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Georgi Djakov <djakov@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230817204144.never.605-kees@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>