Commit graph

766,493 commits

Author SHA1 Message Date
Chen-Yu Tsai
25ae15fb0e net: stmmac: dwmac-sun8i: Use regmap_field for syscon register access
On the Allwinner R40, the "GMAC clock" register is located in the CCU
block, at a different register address than the other SoCs that have
it in the "system control" block.

This patch converts the use of regmap to regmap_field for mapping and
accessing the syscon register, so we can have the register address in
the variants data, and not in the actual register manipulation code.

This patch only converts regmap_read() and regmap_write() calls to
regmap_field_read() and regmap_field_write() calls. There are some
places where it might make sense to switch to regmap_field_update_bits(),
but this is not done here to keep the patch simple.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 15:06:54 -04:00
Chen-Yu Tsai
eef8811d92 dt-bindings: net: dwmac-sun8i: Add binding for GMAC on Allwinner R40 SoC
The Allwinner R40 SoC has the EMAC controller supported by dwmac-sun8i.
It is named "GMAC", while EMAC refers to the 10/100 Mbps Ethernet
controller supported by sun4i-emac. The controller is the same, but
the R40 has the glue layer controls in the clock control unit (CCU),
with a reduced RX delay chain, and no TX delay chain.

This patch adds the R40 specific bits to the dwmac-sun8i binding.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 15:06:54 -04:00
Chen-Yu Tsai
a6fe692e6e dt-bindings: net: dwmac-sun8i: simplify description of syscon property
The syscon property is used to point to the device that holds the glue
layer control register known as the "EMAC (or GMAC) clock register".

We do not need to explicitly list what compatible strings are needed, as
this information is readily available in the user manuals. Also the
"syscon" device type is more of an implementation detail. There are many
ways to access a register not in a device's address range, the syscon
interface being the most generic and unrestricted one.

Simplify the description so that it says what it is supposed to
describe.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 15:06:53 -04:00
Chen-Yu Tsai
9ed3fec3c3 dt-bindings: net: dwmac-sun8i: Sort syscon compatibles by alphabetical order
The A83T syscon compatible was appended to the syscon compatibles list,
instead of inserted in to preserve the ordering.

Move it to the proper place to keep the list sorted.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 15:06:53 -04:00
Chen-Yu Tsai
a4a78a97ee dt-bindings: net: dwmac-sun8i: Clean up clock delay chain descriptions
The clock delay chains found in the glue layer for dwmac-sun8i are only
used with RGMII PHYs. They are not intended for non-RGMII PHYs, such as
MII external PHYs or the internal PHY. Also, a recent SoC has a smaller
range of possible values for the delay chain.

This patch reformats the delay chain section of the device tree binding
to make it clear that the delay chains only apply to RGMII PHYs, and
make it easier to add the R40-specific bits later.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 15:06:53 -04:00
David S. Miller
62150dfefc Merge branch 'dsa-mv88e6xxx-remove-Global-1-setup'
Vivien Didelot says:

====================
net: dsa: mv88e6xxx: remove Global 1 setup

The mv88e6xxx driver is still writing arbitrary registers at setup time,
e.g. priority override bits. Add ops for them and provide specific setup
functions for priority and stats before getting rid of the erroneous
mv88e6xxx_g1_setup code, as previously done with Global 2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 14:49:40 -04:00
Vivien Didelot
447b1bb84b net: dsa: mv88e6xxx: add a stats setup function
Now that the Global 1 specific setup function only setup the statistics
unit, kill it in favor of a mv88e6xxx_stats_setup function.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 14:49:40 -04:00
Vivien Didelot
93e18d61bf net: dsa: mv88e6xxx: add IEEE and IP mapping ops
All Marvell switch families except 88E6390 have direct registers in
Global 1 for IEEE and IP priorities override mapping. The 88E6390 uses
indirect tables instead.

Add .ieee_pri_map and .ip_pri_map ops to distinct that and call them
from a mv88e6xxx_pri_setup helper. Only non-6390 are concerned ATM.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 14:49:40 -04:00
Vivien Didelot
408d2debb0 net: dsa: mv88e6xxx: use helper for 6390 histogram
The Marvell 88E6390 model has its histogram mode bits moved in the
Global 1 Control 2 register. Use the previously introduced
mv88e6xxx_g1_ctl2_mask helper to set them.

At the same time complete the documentation of the said register.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 14:49:39 -04:00
Jason Wang
b196d88aba tun: fix use after free for ptr_ring
We used to initialize ptr_ring during TUNSETIFF, this is because its
size depends on the tx_queue_len of netdevice. And we try to clean it
up when socket were detached from netdevice. A race were spotted when
trying to do uninit during a read which will lead a use after free for
pointer ring. Solving this by always initialize a zero size ptr_ring
in open() and do resizing during TUNSETIFF, and then we can safely do
cleanup during close(). With this, there's no need for the workaround
that was introduced by commit 4df0bfc799 ("tun: fix a memory leak
for tfile->tx_array").

Reported-by: syzbot+e8b902c3c3fadf0a9dba@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Fixes: 1576d98605 ("tun: switch to use skb array for tx")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 14:47:08 -04:00
David S. Miller
23548dab56 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-05-14

This series contains updates to virtchnl, i40e and i40evf.

Bruce cleans up whitespace and unnecessary parentheses in virtchnl.

Jake does a number of stat cleanups in the i40e driver, including
cleanup of code indentation, whitespace issues, remove duplicate stats,
fix grammar in code comment and general spring cleaning of the
statistics code.

Patryk fixes an issue where we recalculate vectors left and vectors
wanted but do not take into account the reduced number of queue pairs
per VSI.

Harshitha adds tx_busy stat to ethtool stats to track the number of
times we return NETDEV_TX_BUSY to the stack during transmit.

Paweł fixes a potential system crash when unloading the VF driver after
a hardware reset.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 14:28:59 -04:00
Jens Axboe
c854ab5773 sbitmap: fix race in wait batch accounting
If we have multiple callers of sbq_wake_up(), we can end up in a
situation where the wait_cnt will continually go more and more
negative. Consider the case where our wake batch is 1, hence
wait_cnt will start out as 1.

wait_cnt == 1

CPU0				CPU1
atomic_dec_return(), cnt == 0
				atomic_dec_return(), cnt == -1
				cmpxchg(-1, 0) (succeeds)
				[wait_cnt now 0]
cmpxchg(0, 1) (fails)

This ends up with wait_cnt being 0, we'll wakeup immediately
next time. Going through the same loop as above again, and
we'll have wait_cnt -1.

For the case where we have a larger wake batch, the only
difference is that the starting point will be higher. We'll
still end up with continually smaller batch wakeups, which
defeats the purpose of the rolling wakeups.

Always reset the wait_cnt to the batch value. Then it doesn't
matter who wins the race. But ensure that whomever does win
the race is the one that increments the ws index and wakes up
our batch count, loser gets to call __sbq_wake_up() again to
account his wakeups towards the next active wait state index.

Fixes: 6c0ca7ae29 ("sbitmap: fix wakeup hang after sbq resize")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14 12:17:31 -06:00
David S. Miller
42b956fdc8 Merge branch 'kernel-add-support-to-collect-hardware-logs-in-crash-recovery-kernel'
Rahul Lakkireddy says:

====================
kernel: add support to collect hardware logs in crash recovery kernel

On production servers running variety of workloads over time, kernel
panic can happen sporadically after days or even months. It is
important to collect as much debug logs as possible to root cause
and fix the problem, that may not be easy to reproduce. Snapshot of
underlying hardware/firmware state (like register dump, firmware
logs, adapter memory, etc.), at the time of kernel panic will be very
helpful while debugging the culprit device driver.

This series of patches add new generic framework that enable device
drivers to collect device specific snapshot of the hardware/firmware
state of the underlying device in the crash recovery kernel. In crash
recovery kernel, the collected logs are added as elf notes to
/proc/vmcore, which is copied by user space scripts for post-analysis.

The sequence of actions done by device drivers to append their device
specific hardware/firmware logs to /proc/vmcore are as follows:

1. During probe (before hardware is initialized), device drivers
register to the vmcore module (via vmcore_add_device_dump()), with
callback function, along with buffer size and log name needed for
firmware/hardware log collection.

2. vmcore module allocates the buffer with requested size. It adds
an elf note and invokes the device driver's registered callback
function.

3. Device driver collects all hardware/firmware logs into the buffer
and returns control back to vmcore module.

The device specific hardware/firmware logs can be seen as elf notes
with note type 0x700, as shown below:

Displaying notes found at file offset 0x00001000 with length 0x040032c0:
  Owner                 Data size	Description
  LINUX                0x02000fec	Unknown note type: (0x00000700)
  LINUX                0x02000fec	Unknown note type: (0x00000700)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  CORE                 0x00000150	NT_PRSTATUS (prstatus structure)
  VMCOREINFO           0x00000785	Unknown note type: (0x00000000)

Patch 1 adds API to vmcore module to allow drivers to register callback
to collect the device specific hardware/firmware logs.  The logs will
be added to /proc/vmcore as elf notes.

Patch 2 updates read and mmap logic to append device specific hardware/
firmware logs as elf notes.

Patch 3 shows a cxgb4 driver example using the API to collect
hardware/firmware logs in crash recovery kernel, before hardware is
initialized.

Thanks,
Rahul

---
v8:
- Added missing linux/types.h header include.
- Removed __vmcore_add_device_dump().

v7:
- Removed "CHELSIO" vendor identifier in Elf Note name. Instead,
  writing "LINUX".
- Moved vmcoredd_header to new file include/uapi/linux/vmcore.h
- Reworked vmcoredd_header to include Elf Note as part of the header
  itself.
- Removed vmcoredd_get_note_size().
- Renamed vmcoredd_write_note() to vmcoredd_write_header().
- Replaced all "unsigned long" with "unsigned int" for device dump
  size since max size of Elf Word is u32.

v6:
- Reworked device dump elf note name to contain vendor identifier.
- Added vmcoredd_header that precedes actual dump in the Elf Note.
- Device dump's name is moved inside vmcoredd_header.
- Added "CHELSIO" string as vendor identifier in the Elf Note name
  for cxgb4 device dumps.

v5:
- Removed enabling CONFIG_PROC_VMCORE_DEVICE_DUMP by default and
  updated help message.

v4:
- Made __vmcore_add_device_dump() static.
- Moved compile check to define vmcore_add_device_dump() to
  crash_dump.h to fix compilation when vmcore.c is not compiled in.
- Convert ---help--- to help in Kconfig as indicated by checkpatch.
- Rebased to tip.

v3:
- Dropped sysfs crashdd module.
- Exported dumps as elf notes. Suggested by Eric Biederman
  <ebiederm@xmission.com>.  Added as patch 2 in this version.
- Added CONFIG_PROC_VMCORE_DEVICE_DUMP to allow configuring device
  dump support.
- Moved logic related to adding dumps from crashdd to vmcore module.
- Rename all crashdd* to vmcoredd*.
- Updated comments.

v2:
- Added ABI Documentation for crashdd.
- Directly use octal permission instead of macro.

Changes since rfc v2:
- Moved exporting crashdd from procfs to sysfs. Suggested by
  Stephen Hemminger <stephen@networkplumber.org>
- Moved code from fs/proc/crashdd.c to fs/crashdd/ directory.
- Replaced all proc API with sysfs API and updated comments.
- Calling driver callback before creating the binary file under
  crashdd sysfs.
- Changed binary dump file permission from S_IRUSR to S_IRUGO.
- Changed module name from CRASH_DRIVER_DUMP to CRASH_DEVICE_DUMP.

rfc v2:
- Collecting logs in 2nd kernel instead of during kernel panic.
  Suggested by Eric Biederman <ebiederm@xmission.com>.
- Added new crashdd module that exports /proc/crashdd/ containing
  driver's registered hardware/firmware logs in patch 1.
- Replaced the API to allow drivers to register their hardware/firmware
  log collect routine in crash recovery kernel in patch 1.
- Updated patch 2 to use the new API in patch 1.
====================

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 13:49:33 -04:00
Rahul Lakkireddy
1dde532dd0 cxgb4: collect hardware dump in second kernel
Register callback to collect hardware/firmware dumps in second kernel
before hardware/firmware is initialized. The dumps for each device
will be available as elf notes in /proc/vmcore in second kernel.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 13:46:05 -04:00
Rahul Lakkireddy
7efe48df8a vmcore: append device dumps to vmcore as elf notes
Update read and mmap logic to append device dumps as additional notes
before the other elf notes. We add device dumps before other elf notes
because the other elf notes may not fill the elf notes buffer
completely and we will end up with zero-filled data between the elf
notes and the device dumps. Tools will then try to decode this
zero-filled data as valid notes and we don't want that. Hence, adding
device dumps before the other elf notes ensure that zero-filled data
can be avoided. This also ensures that the device dumps and the
other elf notes can be properly mmaped at page aligned address.

Incorporate device dump size into the total vmcore size. Also update
offsets for other program headers after the device dumps are added.

Suggested-by: Eric Biederman <ebiederm@xmission.com>.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 13:46:04 -04:00
Rahul Lakkireddy
2724273e8f vmcore: add API to collect hardware dump in second kernel
The sequence of actions done by device drivers to append their device
specific hardware/firmware logs to /proc/vmcore are as follows:

1. During probe (before hardware is initialized), device drivers
register to the vmcore module (via vmcore_add_device_dump()), with
callback function, along with buffer size and log name needed for
firmware/hardware log collection.

2. vmcore module allocates the buffer with requested size. It adds
an Elf note and invokes the device driver's registered callback
function.

3. Device driver collects all hardware/firmware logs into the buffer
and returns control back to vmcore module.

Ensure that the device dump buffer size is always aligned to page size
so that it can be mmaped.

Also, rename alloc_elfnotes_buf() to vmcore_alloc_buf() to make it more
generic and reserve NT_VMCOREDD note type to indicate vmcore device
dump.

Suggested-by: Eric Biederman <ebiederm@xmission.com>.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 13:46:04 -04:00
Rob Herring
9e2aee80c7 PCI: Move private DT related functions into private header
The functions in linux/of_pci.h are primarily used by host bridge
drivers, so they can be private to drivers/pci/.

The remaining functions are still used mostly in host bridge drivers
that still live in arch specific code. Hopefully someday, those will get
moved into drivers/pci as well.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
2018-05-14 18:09:40 +01:00
Rob Herring
a5aa35cdf0 PCI: dwc: Move CONFIG_PCI depends to menu
There's no need for every config option to explicitly depend on
CONFIG_PCI, so move it out of individual option to the menu option.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
2018-05-14 18:09:09 +01:00
Gustavo Pimentel
76cbf066b1 PCI: dwc: Replace magic number by defines
Replace magic numbers by a self-explained define to ease human
comprehension.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
2018-05-14 17:32:04 +01:00
Olof Johansson
ae93870f73 Reset controller fixes for v4.17
Fix the USB3 reset (offset 0x200c, bit 5) on Uniphier LD20. It was
 incorrectly labeled as GIO reset. This reset line is not yet used in
 uniphier-ld20.dtsi.
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCWvmr9RcccC56YWJlbEBw
 ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwJlYAP4008mrJKjGTLMy/GZOwMIpmdm3
 7qYxoD3rsgyby0Cn+QEAhyfrNAXHmcAwXxuprPGB1Z2rAmN23KqnpoqiVxhn6AQ=
 =4LaA
 -----END PGP SIGNATURE-----

Merge tag 'reset-fixes-for-4.17' of git://git.pengutronix.de/pza/linux into fixes

Reset controller fixes for v4.17

Fix the USB3 reset (offset 0x200c, bit 5) on Uniphier LD20. It was
incorrectly labeled as GIO reset. This reset line is not yet used in
uniphier-ld20.dtsi.

* tag 'reset-fixes-for-4.17' of git://git.pengutronix.de/pza/linux:
  reset: uniphier: fix USB clock line for LD20

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14 09:27:33 -07:00
Olof Johansson
99ffa8b0e7 mvebu fixes for 4.17 (part 1)
Declare missing clocks needed for network on Armada 8040 base boards
 (such as the McBin)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWvlJAQAKCRALBhiOFHI7
 1SoAAJoCngBPtDyyQCn2s7nMGywq0/a2qwCfSSzQbadOLiBe5jUMsR9LG9M4L2E=
 =XZeW
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-fixes-4.17-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 4.17 (part 1)

Declare missing clocks needed for network on Armada 8040 base boards
(such as the McBin)

* tag 'mvebu-fixes-4.17-1' of git://git.infradead.org/linux-mvebu:
  ARM64: dts: marvell: armada-cp110: Add mg_core_clk for ethernet node
  ARM64: dts: marvell: armada-cp110: Add clocks for the xmdio node

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14 09:25:14 -07:00
Russell King
9954b80b8c ARM: keystone: fix platform_domain_notifier array overrun
platform_domain_notifier contains a variable sized array, which the
pm_clk_notify() notifier treats as a NULL terminated array:

     for (con_id = clknb->con_ids; *con_id; con_id++)
             pm_clk_add(dev, *con_id);

Omitting the initialiser for con_ids means that the array is zero
sized, and there is no NULL terminator.  This leads to pm_clk_notify()
overrunning into what ever structure follows, which may not be NULL.
This leads to an oops:

Unable to handle kernel NULL pointer dereference at virtual address 0000008c
pgd = c0003000
[0000008c] *pgd=80000800004003c, *pmd=00000000c
Internal error: Oops: 206 [#1] PREEMPT SMP ARM
Modules linked in:c
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0+ #9
Hardware name: Keystone
PC is at strlen+0x0/0x34
LR is at kstrdup+0x18/0x54
pc : [<c0623340>]    lr : [<c0111d6c>]    psr: 20000013
sp : eec73dc0  ip : eed780c0  fp : 00000001
r10: 00000000  r9 : 00000000  r8 : eed71e10
r7 : 0000008c  r6 : 0000008c  r5 : 014000c0  r4 : c03a6ff4
r3 : c09445d0  r2 : 00000000  r1 : 014000c0  r0 : 0000008c
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 30c5387d  Table: 00003000  DAC: fffffffd
Process swapper/0 (pid: 1, stack limit = 0xeec72210)
Stack: (0xeec73dc0 to 0xeec74000)
...
[<c0623340>] (strlen) from [<c0111d6c>] (kstrdup+0x18/0x54)
[<c0111d6c>] (kstrdup) from [<c03a6ff4>] (__pm_clk_add+0x58/0x120)
[<c03a6ff4>] (__pm_clk_add) from [<c03a731c>] (pm_clk_notify+0x64/0xa8)
[<c03a731c>] (pm_clk_notify) from [<c004614c>] (notifier_call_chain+0x44/0x84)
[<c004614c>] (notifier_call_chain) from [<c0046320>] (__blocking_notifier_call_chain+0x48/0x60)
[<c0046320>] (__blocking_notifier_call_chain) from [<c0046350>] (blocking_notifier_call_chain+0x18/0x20)
[<c0046350>] (blocking_notifier_call_chain) from [<c0390234>] (device_add+0x36c/0x534)
[<c0390234>] (device_add) from [<c047fc00>] (of_platform_device_create_pdata+0x70/0xa4)
[<c047fc00>] (of_platform_device_create_pdata) from [<c047fea0>] (of_platform_bus_create+0xf0/0x1ec)
[<c047fea0>] (of_platform_bus_create) from [<c047fff8>] (of_platform_populate+0x5c/0xac)
[<c047fff8>] (of_platform_populate) from [<c08b1f04>] (of_platform_default_populate_init+0x8c/0xa8)
[<c08b1f04>] (of_platform_default_populate_init) from [<c000a78c>] (do_one_initcall+0x3c/0x164)
[<c000a78c>] (do_one_initcall) from [<c087bd9c>] (kernel_init_freeable+0x10c/0x1d0)
[<c087bd9c>] (kernel_init_freeable) from [<c0628db0>] (kernel_init+0x8/0xf0)
[<c0628db0>] (kernel_init) from [<c00090d8>] (ret_from_fork+0x14/0x3c)
Exception stack(0xeec73fb0 to 0xeec73ff8)
3fa0:                                     00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e3520000 1afffff7 e12fff1e c0801730 (e5d02000)
---[ end trace cafa8f148e262e80 ]---

Fix this by adding the necessary initialiser.

Fixes: fc20ffe121 ("ARM: keystone: add PM domain support for clock management")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14 09:24:29 -07:00
Jim Mattson
3a2936dedd kvm: mmu: Don't expose private memslots to L2
These private pages have special purposes in the virtualization of L1,
but not in the virtualization of L2. In particular, L1's APIC access
page should never be entered into L2's page tables, because this
causes a great deal of confusion when the APIC virtualization hardware
is being used to accelerate L2's accesses to its own APIC.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14 18:24:26 +02:00
Jim Mattson
1313cc2bd8 kvm: mmu: Add guest_mode to kvm_mmu_page_role
L1 and L2 need to have disjoint mappings, so that L1's APIC access
page (under VMX) can be omitted from L2's mappings.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14 18:24:25 +02:00
Jim Mattson
ab5df31cee kvm: nVMX: Eliminate APIC access page sharing between L1 and L2
It is only possible to share the APIC access page between L1 and L2 if
they also share the virtual-APIC page.  If L2 has its own virtual-APIC
page, then MMIO accesses to L1's TPR from L2 will access L2's TPR
instead.  Moreover, L1's local APIC has to be in xAPIC mode, which is
another condition that hasn't been checked.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14 18:24:24 +02:00
Jim Mattson
8d860bbeed kvm: vmx: Basic APIC virtualization controls have three settings
Previously, we toggled between SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE
and SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES, depending on whether or
not the EXTD bit was set in MSR_IA32_APICBASE. However, if the local
APIC is disabled, we should not set either of these APIC
virtualization control bits.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14 18:24:24 +02:00
Olof Johansson
f4f8ef04a1 Device tree changes for omap variants for SDHCI
This series adds the devicetree configuration needed for pinctrl on
 dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
 driver. To use SDHCI, both the pins and the iodelay needs to be
 configured.
 
 This series is based on the related SDHCI drivers changes on a branch
 set up by Ulf.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlrshosRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXMHfxAAoMDDdA02GAlZ3bN+8St5jPNuUwTcUh+u
 neX38uCQzkssc0bLXpBd2TYXYxqnk4mXilD1cE5kOQlS7B3uFnGDgLFekm/jZcQ/
 1ZcS9BWbX96VA0wUo2k+XjDSWgu18j3UyrCIsEORIumQPEfnJJGw2stPewTjDnrO
 rjCFZWL+c5Brw1YJybozfsnUEBzL3ylBLqrG/NB2hpdTnohwXjWBWtkWbsbkQlDc
 k6sE5W/uzdPfL0ZjProY0s/nZLJ5TMKgjXZsKtqrqUme65lP+MFL0nk8AUixZnKj
 UUqetO3r8ZpGDJbltfDBaAk37hLWY14AYqdGSsCV3g9hOoO2WuSOZoVBW4XLe+JJ
 UG1WZgJ5NhJNgNtC7BSODdg5D+sNZl+m6DfGd4F2X85TiU+XoQiNk4Zsv4QJc0wP
 Ezks1Cj15vXZZxAVj3vhe9OMsjvTp9eLCQaiUWaiXpyensfjF4OOlvwJiPvX6UcX
 wz1kSJOo6HZQH2n21Jc6so4/mTKcjcRmSRdBpXhg5KpEHgOtWNqpIyFubvtd8jfd
 EWVnxNDoT4JlhMNTORy8ffI8T/R5uzqa0aE8iRcHt0ZVsG/89rqyVhPkZqUlpJlP
 iDqwQmBu6f9H1RU6UEyyuYJ4M6EthMd/uLMrZPzYZ0giYetAnlM4KYVVP5on/22d
 JqKz7MhC+2M=
 =lz73
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.18/dt-sdhci-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omap variants for SDHCI

This series adds the devicetree configuration needed for pinctrl on
dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
driver. To use SDHCI, both the pins and the iodelay needs to be
configured.

This series is based on the related SDHCI drivers changes on a branch
set up by Ulf.

* tag 'omap-for-v4.18/dt-sdhci-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (28 commits)
  Documentation: ARM: Add new MMC requirements for DRA7/K2G
  ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node
  ARM: dts: dra7: Use sdhci-omap programming model
  ARM: dts: dra76-evm: Add wilink8 wlan support
  ARM: dts: dra7-evm: Add wilink8 wlan support
  ARM: dts: dra7-evm: Model EVM_3V6 regulator
  ARM: dts: dra72-evm-common: Add wilink8 wlan support
  ARM: dts: am57xx-beagle-x15/am57xx-idk: Fix pinctrl-names
  ARM: dts: am574x-idk: Add pinmux configuration for MMC
  ARM: dts: dra71-evm: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown
  ARM: dts: am57xx-idk: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown
  ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup
  ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2
  ARM: dts: dra72-evm-common: Remove mmc specific pinmux
  mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode
  dt-bindings: sdhci-omap: Add pinctrl bindings
  mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq
  mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC
  dt-bindings: sdhci-omap: Add K2G specific binding
  mmc: sdhci-omap: Workaround for Errata i834
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14 09:19:45 -07:00
Jim Mattson
5887164942 kvm: vmx: Introduce lapic_mode enumeration
The local APIC can be in one of three modes: disabled, xAPIC or
x2APIC. (A fourth mode, "invalid," is included for completeness.)

Using the new enumeration can make some of the APIC mode logic easier
to read. In kvm_set_apic_base, for instance, it is clear that one
cannot transition directly from x2APIC mode to xAPIC mode or directly
from APIC disabled to x2APIC mode.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
[Check invalid bits even if msr_info->host_initiated.  Reported by
 Wanpeng Li. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14 18:14:25 +02:00
Vitaly Kuznetsov
ceef7d10df KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support
Enlightened MSR-Bitmap is a natural extension of Enlightened VMCS:
Hyper-V Top Level Functional Specification states:

"The L1 hypervisor may collaborate with the L0 hypervisor to make MSR
accesses more efficient. It can enable enlightened MSR bitmaps by setting
the corresponding field in the enlightened VMCS to 1. When enabled, the L0
hypervisor does not monitor the MSR bitmaps for changes. Instead, the L1
hypervisor must invalidate the corresponding clean field after making
changes to one of the MSR bitmaps."

I reached out to Hyper-V team for additional details and I got the
following information:

"Current Hyper-V implementation works as following:

If the enlightened MSR bitmap is not enabled:
- All MSR accesses of L2 guests cause physical VM-Exits

If the enlightened MSR bitmap is enabled:
- Physical VM-Exits for L2 accesses to certain MSRs (currently FS_BASE,
  GS_BASE and KERNEL_GS_BASE) are avoided, thus making these MSR accesses
  faster."

I tested my series with a tight rdmsrl loop in L2, for KERNEL_GS_BASE the
results are:

Without Enlightened MSR-Bitmap: 1300 cycles/read
With Enlightened MSR-Bitmap: 120 cycles/read

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14 18:14:24 +02:00
Junaid Shahid
74b566e6cf kvm: x86: Refactor mmu_free_roots()
Extract the logic to free a root page in a separate function to avoid code
duplication in mmu_free_roots(). Also, change it to an exported function
i.e. kvm_mmu_free_roots().

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14 18:14:23 +02:00
Wanpeng Li
a780a3ea62 KVM: X86: Fix reserved bits check for MOV to CR3
MSB of CR3 is a reserved bit if the PCIDE bit is not set in CR4.
It should be checked when PCIDE bit is not set, however commit
'd1cd3ce900 ("KVM: MMU: check guest CR3 reserved bits based on
its physical address width")' removes the bit 63 checking
unconditionally. This patch fixes it by checking bit 63 of CR3
when PCIDE bit is not set in CR4.

Fixes: d1cd3ce900 (KVM: MMU: check guest CR3 reserved bits based on its physical address width)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14 18:14:16 +02:00
Gustavo Pimentel
6995de2168 PCI: dwc: Small computation improvement
Replace a division by 2 operation for a right shift rotation of 1 bit.

Probably any recent and decent compiler does this kind of substitution
in order to improve code performance. Nevertheless it's a coding good
practice whenever there is a division / multiplication by multiple of 2
to replace it by the equivalent operation in this case, the shift
rotation.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
2018-05-14 17:04:05 +01:00
Gustavo Pimentel
b4a8a51caf PCI: dwc: Replace lower into upper case characters
Replace of all initial lowercase character in comments and debug messages
to uppercase to maintain coherence.

Fix messages coherence within the DesignWare driver.

Fix code style on dw_pcie_irq_domain_free() function.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
2018-05-14 17:03:52 +01:00
Gustavo Pimentel
2d27ae8998 PCI: dwc: Define maximum number of vectors
Add a callback to define the maximum number of vectors used by the RC.

Since this is a parameter associated to each SoC IP setting, makes sense
to be configurable and easily visible to future modifications.

Set DesignWare driver vectors number maximum to 256.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
2018-05-14 17:03:33 +01:00
Takashi Sakamoto
4844f51282 ALSA: isight: use position offset macro of TLV data
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-14 17:48:14 +02:00
Takashi Sakamoto
51cdc8b6a6 ALSA: hda: use position offset macro of TLV data
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-14 17:47:57 +02:00
Takashi Sakamoto
841bdb7c0b ALSA: vmaster: use position offset macro of TLV data
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-14 17:47:48 +02:00
Takashi Sakamoto
e6f32bf48f ALSA: control: complement TLV macro for db-minmax and db-linear types
A commit 08f9f4485f ('ALSA: core api: define offsets for TLV items')
introduced a series of macro for offset of db-scale type of TLV, however
there are some types of TLV to add similar macros.

This commit complements macros for offset of db-minmax and db-linear types
of TLV data.

Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-14 17:47:37 +02:00
Patrice Chotard
c5bf208a0d ARM: dts: stihxxx-b2120: Fix complain about IRQ_TYPE_NONE usage
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.

Use IRQ_TYPE_LEVEL_HIGH instead.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14 17:40:26 +02:00
Patrice Chotard
fd827d0ec8 ARM: dts: stih410: Fix complain about IRQ_TYPE_NONE usage
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.

Use IRQ_TYPE_LEVEL_HIGH instead.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14 17:40:25 +02:00
Patrice Chotard
2e82e8b377 ARM: dts: stih407: Fix complain about IRQ_TYPE_NONE usage
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.

Use IRQ_TYPE_LEVEL_HIGH instead.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14 17:40:25 +02:00
Patrice Chotard
e95b8e718f ARM: dts: stih407-pinctrl: Fix complain about IRQ_TYPE_NONE usage
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.

Use IRQ_TYPE_LEVEL_HIGH instead.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14 17:40:24 +02:00
Patrice Chotard
d96940d84a ARM: dts: stih407-family: Fix complain about IRQ_TYPE_NONE usage
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.

Use IRQ_TYPE_LEVEL_HIGH instead.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-14 17:40:16 +02:00
François Cami
76936e9a6d libata: Apply NOLPM quirk for SAMSUNG PM830 CXM13D1Q.
Without this patch the drive errors out regularly:

[    1.090154] ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 256GB,
CXM13D1Q, max UDMA/133
(...)
[  345.154996] ata1.00: exception Emask 0x40 SAct 0x0 SErr 0xc0800 action 0x6
[  345.155006] ata1.00: irq_stat 0x40000001
[  345.155013] ata1: SError: { HostInt CommWake 10B8B }
[  345.155018] ata1.00: failed command: SET FEATURES
[  345.155032] ata1.00: cmd ef/05:e1:00:00:00/00:00:00:00:00/40 tag 7
                        res 51/04:e1:00:00:00/00:00:00:00:00/40 Emask 0x41 (internal error)
[  345.155038] ata1.00: status: { DRDY ERR }
[  345.155042] ata1.00: error: { ABRT }
[  345.155051] ata1: hard resetting link
[  345.465661] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  345.466955] ata1.00: configured for UDMA/133
[  345.467085] ata1: EH complete

Signed-off-by: François Cami <fcami@fedoraproject.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-14 08:31:51 -07:00
Jens Axboe
88e10092f6 sata_fsl: use the right type for tag bitshift
Since ATA_TAG_INTERNAL is now > 31 bits, we need to extend the
type to ULL to cover 32/64-bit cases.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-14 08:14:21 -07:00
Daniel Glöckner
ebc3dd688c usb: musb: fix remote wakeup racing with suspend
It has been observed that writing 0xF2 to the power register while it
reads as 0xF4 results in the register having the value 0xF0, i.e. clearing
RESUME and setting SUSPENDM in one go does not work. It might also violate
the USB spec to transition directly from resume to suspend, especially
when not taking T_DRSMDN into account. But this is what happens when a
remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the
root hub and musb_bus_suspend being called.

This commit returns -EBUSY when musb_bus_suspend is called while remote
wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring
this error when musb_port_suspend is called from musb_hub_control is ok.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 17:04:06 +02:00
Mathieu Malaterre
6a8b55d7f2 driver core: add __printf verification to device_create_groups_vargs
__printf is useful to verify format and arguments. Remove the following
warning (with W=1):

  drivers/base/core.c:2435:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 16:59:21 +02:00
Christoph Hellwig
0eb0b63c1d block: consistently use GFP_NOIO instead of __GFP_NORECLAIM
Same numerical value (for now at least), but a much better documentation
of intent.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14 08:55:18 -06:00
Christoph Hellwig
c3036021c7 block: use GFP_NOIO instead of __GFP_DIRECT_RECLAIM
We just can't do I/O when doing block layer requests allocations,
so use GFP_NOIO instead of the even more limited __GFP_DIRECT_RECLAIM.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14 08:55:16 -06:00
Christoph Hellwig
4accf5fc79 block: pass an explicit gfp_t to get_request
blk_old_get_request already has it at hand, and in blk_queue_bio, which
is the fast path, it is constant.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14 08:55:14 -06:00