Commit graph

766,493 commits

Author SHA1 Message Date
Michael Chan
47558acd56 bnxt_en: Reserve rings at driver open if none was reserved at probe time.
Add logic to reserve default rings at driver open time if none was
reserved during probe time.  This will happen when the PF driver did
not provision minimum rings to the VF, due to more limited resources.

Driver open will only succeed if some minimum rings can be reserved.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:31 -04:00
Michael Chan
86c3380d9b bnxt_en: Reserve RSS and L2 contexts for VF.
For completeness and correctness, the VF driver needs to reserve these
RSS and L2 contexts.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:31 -04:00
Michael Chan
2773dfb201 bnxt_en: Don't reserve rings on VF when min rings were not provisioned by PF.
When rings are more limited and the PF has not provisioned minimum
guaranteed rings to the VF, do not reserve rings during driver probe.
Wait till device open before reserving rings when they will be used.
Device open will succeed if some minimum rings can be successfully
reserved and allocated.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:31 -04:00
Michael Chan
d8c09f19ac bnxt_en: Reserve rings in bnxt_set_channels() if device is down.
The current code does not reserve rings during ethtool -L when the device
is down.  The rings will be reserved when the device is later opened.

Change it to reserve rings during ethtool -L when the device is down.
This provides a better guarantee that the device open will be successful
when the rings are reserved ahead of time.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:31 -04:00
Andy Gospodarek
cabfb09d87 bnxt_en: add debugfs support for DIM
This adds debugfs support for bnxt_en with the purpose of allowing users
to examine the current DIM profile in use for each receive queue.  This
was instrumental in debugging issues found with DIM and ensuring that
the profiles we expect to use are the profiles being used.

Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:30 -04:00
Andy Gospodarek
9751e8e714 bnxt_en: reduce timeout on initial HWRM calls
Testing with DIM enabled on older kernels indicated that firmware calls
were slower than expected.  More detailed analysis indicated that the
default 25us delay was higher than necessary.  Reducing the time spend in
usleep_range() for the first several calls would reduce the overall
latency of firmware calls on newer Intel processors.

Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:30 -04:00
Andy Gospodarek
05abe4ddf0 bnxt_en: Increase RING_IDLE minimum threshold to 50
This keeps the RING_IDLE flag set in hardware for higher coalesce
settings by default and improved latency.

Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:30 -04:00
Michael Chan
4cebbaca12 bnxt_en: Do not allow VF to read EEPROM.
Firmware does not allow the operation and would return failure, causing
a warning in dmesg.  So check for VF and disallow it in the driver.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:30 -04:00
Vasundhara Volam
20c1d28e10 bnxt_en: Display function level rx/tx_discard_pkts via ethtool
Add counters to display sum of rx/tx_discard_pkts of all rings as
function level statistics via ethtool.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:29 -04:00
Michael Chan
2727c888f2 bnxt_en: Simplify ring alloc/free error messages.
Replace switch statements printing different messages for every ring type
with a common message.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:28 -04:00
Michael Chan
ca2c39e2ec bnxt_en: Do not set firmware time from VF driver on older firmware.
Older firmware will reject this call and cause an error message to
be printed by the VF driver.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:28 -04:00
Michael Chan
59895f596b bnxt_en: Check the lengths of encapsulated firmware responses.
Firmware messages that are forwarded from PF to VFs are encapsulated.
The size of these encapsulated messages must not exceed the maximum
defined message size.  Add appropriate checks to avoid oversize
messages.  Firmware messages may be expanded in future specs and
this will provide some guardrails to avoid data corruption.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:28 -04:00
Michael Chan
d31cd579a4 bnxt_en: Remap TC to hardware queues when configuring PFC.
Initially, the MQPRIO TCs are mapped 1:1 directly to the hardware
queues.  Some of these hardware queues are configured to be lossless.
When PFC is enabled on one of more TCs, we now need to remap the
TCs that have PFC enabled to the lossless hardware queues.

After remapping, we need to close and open the NIC for the new
mapping to take effect.  We also need to reprogram all ETS parameters.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:28 -04:00
Michael Chan
2e8ef77ee0 bnxt_en: Add TC to hardware QoS queue mapping logic.
The current driver maps MQPRIO traffic classes directly 1:1 to the
internal hardware queues (TC0 maps to hardware queue 0, etc).  This
direct mapping requires the internal hardware queues to be reconfigured
from lossless to lossy and vice versa when necessary.  This
involves reconfiguring internal buffer thresholds which is
disruptive and not always reliable.

Implement a new scheme to map TCs to internal hardware queues by
matching up their PFC requirements.  This will eliminate the need
to reconfigure a hardware queue internal buffers at run time.  After
remapping, the NIC is closed and opened for the new TC to hardware
queues to take effect.

This patch only adds the basic mapping logic.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:47:28 -04:00
Arnaldo Carvalho de Melo
019c6820d5 perf symbols: kallsyms__delta() needs the kmap, not the map
It was only using the map to obtain its kmap, so do the validation in
its called, __dso__load_kallsyms() and pass the kmap, that will be used
in the following patches in similar simplifications.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-u6p9hbonlqzpl6o1z9xzxd75@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-27 15:47:13 -03:00
Stephen Hemminger
c347b9273c hv_netvsc: simplify receive side calling arguments
The calls up from the napi poll reading the receive ring had many
places where an argument was being recreated. I.e the caller already
had the value and wasn't passing it, then the callee would use
known relationship to determine the same value. Simpler and faster
to just pass arguments needed.

Also, add const in a couple places where message is being only read.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:46:26 -04:00
David S. Miller
4422cc0d5b Merge branch 'sctp-refactor-MTU-handling'
Marcelo Ricardo Leitner says:

====================
sctp: refactor MTU handling

Currently MTU handling is spread over SCTP stack. There are multiple
places doing same/similar calculations and updating them is error prone
as one spot can easily be left out.

This patchset converges it into a more concise and consistent code. In
general, it moves MTU handling from functions with bigger objectives,
such as sctp_assoc_add_peer(), to specific functions.

It's also a preparation for the next patchset, which removes the
duplication between sctp_make_op_error_space and
sctp_make_op_error_fixed and relies on sctp_mtu_payload introduced here.

More details on each patch.
====================

Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:41:52 -04:00
Bharat Potnuri
2df19e19ae iw_cxgb4: Atomically flush per QP HW CQEs
When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire
corresponding QP lock before moving the CQEs into its corresponding SW
queue and accessing the SQ contents for completing a WR.
Ignore CQEs if corresponding QP is already flushed.

Cc: stable@vger.kernel.org
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:38:44 -04:00
Arnaldo Carvalho de Melo
333cc76c9d perf symbols: Remove unused dso__load_all_kallsyms() 'map' parameter
Only the 'dso' is needed, so ditch the struct used to pass (map, dso),
passing just the used 'dso' pointer.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-17a4gkk1cs4up4smkviymi2g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-27 15:36:15 -03:00
Marcelo Ricardo Leitner
38687b56c5 sctp: allow unsetting sockopt MAXSEG
RFC 6458 Section 8.1.16 says that setting MAXSEG as 0 means that the user
is not limiting it, and not that it should set to the *current* maximum,
as we are doing.

This patch thus allow setting it as 0, effectively removing the user
limit.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:24 -04:00
Marcelo Ricardo Leitner
439ef0309c sctp: consider idata chunks when setting SCTP_MAXSEG
When setting SCTP_MAXSEG sock option, it should consider which kind of
data chunk is being used if the asoc is already available, so that the
limit better reflect reality.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:23 -04:00
Marcelo Ricardo Leitner
63d01330aa sctp: honor PMTU_DISABLED when handling icmp
sctp_sendmsg() could trigger PMTU updates even when PMTU_DISABLED was
set, as pmtu_pending could be set unconditionally during icmp handling
if the socket was in use by the application.

This patch fixes it by checking for PMTU_DISABLED when handling such
deferred updates.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:23 -04:00
Marcelo Ricardo Leitner
6e91b578bf sctp: re-use sctp_transport_pmtu in sctp_transport_route
sctp_transport_route currently is very similar to sctp_transport_pmtu plus
a few other bits.

This patch reuses sctp_transport_pmtu in sctp_transport_route and removes
the duplicated code.

Also, as all calls to sctp_transport_route were forcing the dst release
before calling it, let's just include such release too.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:23 -04:00
Marcelo Ricardo Leitner
22d7be267e sctp: remove sctp_transport_pmtu_check
We are now keeping the MTU information synced between asoc, transport
and dst, which makes the check at sctp_packet_config() not needed
anymore. As it was the sole caller to this function, lets remove it.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:23 -04:00
Marcelo Ricardo Leitner
6ff0f871c2 sctp: introduce sctp_dst_mtu
Which makes sure that the MTU respects the minimum value of
SCTP_DEFAULT_MINSEGMENT and that it is correctly aligned.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:23 -04:00
Marcelo Ricardo Leitner
2521680e18 sctp: remove sctp_assoc_pending_pmtu
No need for this helper.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:23 -04:00
Marcelo Ricardo Leitner
2f5e3c9df6 sctp: introduce sctp_assoc_update_frag_point
and avoid the open-coded versions of it.

Now sctp_datamsg_from_user can just re-use asoc->frag_point as it will
always be updated.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:23 -04:00
Marcelo Ricardo Leitner
feddd6c1af sctp: introduce sctp_mtu_payload
When given a MTU, this function calculates how much payload we can carry
on it. Without a MTU, it calculates the amount of header overhead we
have.

So that when we have extra overhead, like the one added for IP options
on SELinux patches, it is easier to handle it.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:23 -04:00
Marcelo Ricardo Leitner
c4b2893dae sctp: introduce sctp_assoc_set_pmtu
All changes to asoc PMTU should now go through this wrapper, making it
easier to track them and to do other actions upon it.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:22 -04:00
Marcelo Ricardo Leitner
c88da20f95 sctp: remove an if() that is always true
As noticed by Xin Long, the if() here is always true as PMTU can never
be 0.

Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:22 -04:00
Marcelo Ricardo Leitner
800e00c127 sctp: move transport pathmtu calc away of sctp_assoc_add_peer
There was only one case that sctp_assoc_add_peer couldn't handle, which
is when SPP_PMTUD_DISABLE is set and pathmtu not initialized.
So add this situation to sctp_transport_route and reuse what was
already in there.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:22 -04:00
Marcelo Ricardo Leitner
c45698f896 sctp: remove old and unused SCTP_MIN_PMTU
This value is not used anywhere in the code. In essence it is a
duplicate of SCTP_DEFAULT_MINSEGMENT, which is used by the stack.

SCTP_MIN_PMTU value makes more sense, but we should not change to it now
as it would risk breaking applications.

So this patch removes SCTP_MIN_PMTU and adjust the comment above it.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:35:22 -04:00
Stefano Brivio
5a643c861d selftests: pmtu: Minimum MTU for vti6 is 68
A vti6 interface can carry IPv4 packets too.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:33:19 -04:00
David S. Miller
e8e9608116 mlx5-fixes-2018-04-25
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJa4ixLAAoJEEg/ir3gV/o+PB0IAKlexiYEyID3N3cvG/I0m4Zh
 yxIN4H8sUu3kz7dG6dkvpL5Oo5c43/huE+tspOYfFmydMWvOV+DakwqAhkE+KUfe
 VIpF0cM7+T8Els8e7OzuT0Zu5ggeN1wU0uPRhAn1F592BH0ppXGBn8WIKTffYb8c
 5XeB2JSZyw4yMgk1zurm4tVtFvHbYO7SAkLZZG5E0m7EeIujVWi1lTnhXNi9zdm/
 48LoLZ/1Rmx0e/Qpey2fm9HEPRPTgCNSBLEsx2hIDiJG56YyWPH6+N7U9Acf2PaI
 lKu2JMqLYe3du8hhPtCbPYH0i74af/LbNCQgXXgPstAI49v+MydlBcv2NX9J6NY=
 =nw/Q
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-fixes-2018-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-04-26

This pull request includes fixes for mlx5 core and netdev driver.

Please pull and let me know if there's any problems.

For -stable v4.12
    net/mlx5e: TX, Use correct counter in dma_map error flow
For -stable v4.13
    net/mlx5: Avoid cleaning flow steering table twice during error flow
For -stable v4.14
    net/mlx5e: Allow offloading ipv4 header re-write for icmp
For -stable v4.15
    net/mlx5e: DCBNL fix min inline header size for dscp
For -stable v4.16
    net/mlx5: Fix mlx5_get_vector_affinity function
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 14:30:38 -04:00
Jean-Jacques Hiblot
e969a6d222
ASoC: tas6424: Add support for the mute pin
mute can be connected to GPIO. In that case we have to drive it to the
correct value

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-27 19:24:01 +01:00
Jean-Jacques Hiblot
e3976aa6fb
ASoC: tas6424: Add support for the standby pin
The standby pin can be connected to a GPIO. In that case we have to drive
it to the correct values for the TAS6424 to operate properly.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-27 19:24:00 +01:00
Charles Keepax
b24c539b4d
ASoC: core: Allow codec_conf DT lookups to match parent of_node
For devices implemented as a MFD it is common to only have a single node
in devicetree representing the whole device. As such when looking up
codec_conf mappings we should match against both the devices of_node and
the devices parent's of_node, as is already done for DAIs and platform
components.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-27 19:23:59 +01:00
Ariel Levkovich
54e7e48b13 IB/uverbs: Fix kernel crash during MR deregistration flow
This patch fixes a crash that happens due to access to an
uninitialized DM pointer within the MR object.

The change makes sure the DM pointer in the MR object is set to
NULL during a non-DM MR creation to prevent a false indication
that this MR is related to a DM in the dereg flow.

Fixes: be934cca9e ("IB/uverbs: Add device memory registration ioctl support")
Reported-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:22:24 -04:00
Ariel Levkovich
5ccbf63f87 IB/uverbs: Prevent reregistration of DM_MR to regular MR
This patch adds a check in the ib_uverbs_rereg_mr flow to make
sure there's no attempt to rereg a device memory MR to regular MR.
In such case the command will fail with -EINVAL status.

fixes: be934cca9e ("IB/uverbs: Add device memory registration ioctl support")
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:22:24 -04:00
Leon Romanovsky
4f9ca2d868 RDMA/mlx4: Add missed RSS hash inner header flag
Despite being advertised to user space application, the RSS inner
header flag was filtered by checks at the beginning of QP creation
routine.

Cc: <stable@vger.kernel.org> # 4.15
Fixes: 4d02ebd9bb ("IB/mlx4: Fix RSS hash fields restrictions")
Fixes: 07d84f7b6a ("IB/mlx4: Add support to RSS hash for inner headers")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:22:23 -04:00
oulijun
ab17884903 RDMA/hns: Fix a couple misspellings
This patch fixes two spelling errors.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:21:51 -04:00
oulijun
137ae32084 RDMA/hns: Submit bad wr
When generated bad work reqeust, it needs to
report to user. This patch mainly fixes it.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:48 -04:00
oulijun
634f639022 RDMA/hns: Update assignment method for owner field of send wqe
When posting a work reqeust, it need to update the owner bit of send
wqe. This patch mainly fix the bug when posting multiply work
request.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:47 -04:00
oulijun
ae25db0028 RDMA/hns: Adjust the order of cleanup hem table
This patch update the order of cleaning hem table for trrl_table and irrl_table
as well as mtt_cqe_table and mtt_table.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:47 -04:00
oulijun
b6dd9b3483 RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set
Only when the IB_QP_PATH_DEST_QPN flag of attr_mask is set
is it valid to assign the dqpn field of qp context

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:47 -04:00
oulijun
734f38638d RDMA/hns: Remove some unnecessary attr_mask judgement
This patch deletes some unnecessary attr_mask if condition
in hip08 according to the IB protocol.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:47 -04:00
oulijun
6852af8662 RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set
Only when the IB_QP_PATH_MTU flag of attr_mask is set
it is valid to assign the mtu field of qp context when
qp type is not GSI and UD.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:47 -04:00
oulijun
6e1a70943c RDMA/hns: Fix the qp context state diagram
According to RoCE protocol, it is possible to
transition from error to error state for modifying
qp in hip08. This patch fix it.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:47 -04:00
oulijun
328d405b3d RDMA/hns: Intercept illegal RDMA operation when use inline data
RDMA read operation is not supported inline data. If user cofigures
issue a RDMA read and use inline data, it will happen a hardware
error.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:47 -04:00
oulijun
215a8c09e5 RDMA/hns: Bugfix for init hem table
During init hem table, type should be used instead of
table->type which is finally initializaed with type.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27 14:20:47 -04:00