Commit graph

766,493 commits

Author SHA1 Message Date
Niklas Cassel
e13db2d337 MAINTAINERS: Remove myself as maintainer
I am leaving Axis, so this address will bounce in the not too
distant future.

Fortunately, I will still be working with the community.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-26 16:49:14 +02:00
Arnd Bergmann
cc75335826 SCMI fix for v4.17
A single patch eliminating the redundant null pointer check detected
 by CoverityScan("Array compared against 0")
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJa1L8VAAoJEABBurwxfuKYvb8P/igP+0zO88LYyOt0zXupks7Z
 gNhqPEmhIC7VsHvzM2WlGxf8z3L/kPtWJAW8/3LB51ZHVPX72XE6lVgEsBOaPZ7x
 atpnWN4t/xaE799hzbeqjtBGrEoMw8p/rLkGCcvNOgs/pnggfYqwhUyTncM4cn/K
 5wICUUfY9ah9V0pDE6DM00xYqCdXS71SR/9xTnnn5U49aO5TNnZUd9oviKTQpABV
 bhc7s6LykA40u9GQbwzQThMzozc2kg448vr0Hgs3h6Q4aMQoliE2VisIb1DDBUzx
 ioD/8x8d5BxpFbkGCNXbhlp7Me6tWIanJZI+SXnBqDJh8kUbvT+UEljhW6FhACMB
 XEJteIDiVReGveVtHjEtvozkdGgSj+cZIwPc91coAb8LaNAOIHbT+a+DyRgS5MGk
 40wqQPV94JxtqSHGczZDR10zxWZYubh1W/chx49VdXJXFD+khpcdQnqraeEOQotM
 G47efwtZWyutMhyHLa3XhSs0Wtc0NTzlNCd3TSvcCUVElJQ8sunV7S1GTeYQNYUo
 M6mHeL3WoRj10uT+DvvpkvYgKuobH1otCd6u6srK6r8p36+3A6xWOuoW5WBvD8TH
 WkDoEmHU44KIrUDrqGeFI+RSknU785a1CbWSRgDsjhSRW+jDbQF2XcakJsUb40ta
 Jf7mymZHeBPPLaCa5IDd
 =Qt7n
 -----END PGP SIGNATURE-----

Merge tag 'scmi-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes

SCMI fix for v4.17

A single patch eliminating the redundant null pointer check detected
by CoverityScan("Array compared against 0")

* tag 'scmi-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: remove redundant null check on array
2018-04-26 16:48:35 +02:00
Arnd Bergmann
ee370b4292 ARMv8 Juno DT fix for v4.17
A single patch to fix the new DTC warnings probably enabled during
 v4.17 merge window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJa1L5XAAoJEABBurwxfuKYgccP/A1hZt9r2ScgiOSreq7+cdvH
 MIjT2sdu6/XtIS+A0yXaLeICHsXi3VBIP7K/Lo7eJt0lo3RR7t+F0Wtht6Thr3Z2
 Lax2v7I1UkimSWHSptjKNWO6H1CbAcbwLG5mn5vC2zFxMhfOkaNqz6nI8BNJybXH
 Pt5RhFhW/GbQq6rCpp2Beoa4ZTfFRMNXEvtkV+DK874Gh3KDMNUeJWql66YArh9i
 c2Ie8yxtrMGpHC2lVTbYlSYYk65XnpNk3Xs0lsG9LjSXLePuru4l7cD+BXL9rCyz
 8KReymPLwSqbpWKA40hFk8o3vOK8VdCeU4hOgYckvWYuCpE907x/28RnqT9FJYm0
 cHTWugtXGPEPfYgrM1zn/Z0Q9kyeun0iYBFAUZDAP+HNagAtd1isEV9ioqshd59t
 BFOR1ueH1z6Kiymg73l9H7/wv8O40R1gPlzfB0xcP1VbggpVI7s8bafj++OaSHDY
 1kJ6v+f+qjfITh1nDzLwTf8d94S/bX3QRksdNmEMy3fi1c3m7j+ajlmCgkdu+0Vg
 IjpsFrjZ1ptS7W4wJqB9EMIDBghj/E1YaKR41yByfIuvDASm7nwjb9+HAG3sDxAz
 +Unx48FZUyv4AqOhTevNh4u8aSCnOu2SULV5srav1vvmyHLDz5NjSpV3YY7/uTqz
 kH9zHPpprsNstH2EM8Jl
 =fm2S
 -----END PGP SIGNATURE-----

Merge tag 'juno-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes

Pull "ARMv8 Juno DT fix for v4.17" from Sudeep Holla:

A single patch to fix the new DTC warnings probably enabled during
v4.17 merge window.

* tag 'juno-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: drop unnecessary address-cells and size-cells properties
2018-04-26 16:47:34 +02:00
Arnd Bergmann
c7d0a03200 This pull request contains Broadcom SoCs drivers fixes, please pull the
following:
 
 - Geert makes the Raspberry Pi firmwware return -ENOSYS (similar to
   other subsystems) when CONFIG_RASPBERRYPI_FIRMWARE is off.
 
 - Florian fixes an incorrect annotation in the Raspberry Pi power domain
   driver, spotted by sparse
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJa1SPiAAoJEIfQlpxEBwcEzbAQAIgdfOK7nGwlvWF9NdKMHVCE
 lTFOfbTSdfsN5Tfa34AoaUSv7hTIH7c/HH0SLVF5s4k/3Gtr6YUeYI09N3FkhwxM
 suyk75qk5a5Z3+JaHKS+G39MNj46i0FELXgw3ITLlhrtIMOGZrDR5dBQqhbgHeWd
 QUpLmNC7mqSgUu9KSLjawKCKSo2LJkXc9kJDZFnNgWjpH05pckpb+jnOJjzVvWBT
 e4uSa5tb3RJvfVA9v8jBv8qqsY/CuV29VzpumDJxPjoyp8QGH8z49I8GPOJwnOvK
 VvJRiAatAHjgiGEHyHnFzoUG2d5Wt2wc2/3qPjzrG/CHtTT/Jy9xMTTh9Fz5KlOS
 k+rKxgImLB1AMLwQhSyMU8Ep6FooraJiu7yKWt/Cy84ds6lEZ1IB0cgbrqgC3z9V
 fXKhJ446tZfY2ghnScuK9RQdvRRnGVo/7hhVfcnBLKhX2WBON4d59QJbdTGhD42H
 Gtln/Ud9wj/BCEWX2+jdc0680tFhR+UzoB7se4M0p/5yNmDNXF3sU7PbP6DbalVk
 r5/NsSAO1nqijT6RvqO7Lxjj4FYv2OhrNGwq72bzS+1bwjhy1ANW2v3ah6oDXVNw
 tmnmTuQbEz8/x2/cg4SRmneIDX0Wmjj2k9wwlp+vSeAcAT//YWQwUEoF0CvozwJ1
 Ozz3s4ZWpkkYktGPwy+I
 =TuZA
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.17/drivers-fixes' of https://github.com/Broadcom/stblinux into fixes

This pull request contains Broadcom SoCs drivers fixes, please pull the
following:

- Geert makes the Raspberry Pi firmwware return -ENOSYS (similar to
  other subsystems) when CONFIG_RASPBERRYPI_FIRMWARE is off.

- Florian fixes an incorrect annotation in the Raspberry Pi power domain
  driver, spotted by sparse

* tag 'arm-soc/for-4.17/drivers-fixes' of https://github.com/Broadcom/stblinux:
  soc: bcm2835: Make !RASPBERRYPI_FIRMWARE dummies return failure
  soc: bcm: raspberrypi-power: Fix use of __packed
2018-04-26 16:45:54 +02:00
Arnd Bergmann
a0a2d0501d ARM: socfpga_defconfig: fix QSPI Sector 4k
- disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJa1L4RAAoJEBmUBAuBoyj0+o8QAIUU83zy93unAQvtfRzaNAl3
 6UC9xLUPL86a9tUkOeKLALF0r4XJEZqfr4edZRiD/7UJoGSqSeNvYPv4sipuX9BE
 3Lm6H1A5ZgZDeluPwQVe43OvC048TQe3C+NUgzWrzDHTtioRQXXnYc7wdlm67Qwm
 /3k8bPAg7IEWLgt9w/odmPjdnGaz2yBvYrr+1aXXAJBFiWs2NLbfrwsdpLM4wmDk
 yiqxSGyRksxCPj+9IA2SUDFM7YXEDDXumoUKEInGQ7JcYCm1nWDFIYpvxym0O8mr
 uPyv4tbqn/2M9p6CHtcTHdK4CgGFGUEProyye5+SxyqvBPKuw8wSe948lB43UFEI
 AsGj8uX7ADzFLaU86mviDUngumzhNXeTIFuhZhNCGEqkPQhWSItzoEE1XtIMflxl
 erXj9+sSRGWggqZ+pI5VlbbSazvObh6QYx3p65s+XByPl1G3reDe1fVVHsJf3KeI
 Cqb0ie7sHJZmv7MRonuqHl9+a4CoVjVr3aJaso+NrQRus3/eu6iY5ehLeN6tFOLU
 7537CTFOyEQ+Va/BDEo0CGWM5Xpq35BXmBMEx+ITNAhtqSzljm3aubxF4hQeX2KP
 SAopTI5GePH6c1+HGqNT3t4ithfGlFztjjZ1JojjIgAgCsAC5UYvtRTSUwUDatAE
 /MuBVj0LUWM1BQiXq4fe
 =46aV
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_defconfig_fix_v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes

ARM: socfpga_defconfig: fix QSPI Sector 4k
- disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS

* tag 'socfpga_defconfig_fix_v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga_defconfig: Remove QSPI Sector 4K size force
2018-04-26 16:44:54 +02:00
Fabio Estevam
671f8204b1
ASoC: fsl_ssi: Use u32 variable type when using regmap_read()
Convert the sisr and sisr2 variable types to u32 to avoid the following
sparse warnings:

sound/soc/fsl/fsl_ssi.c:391:42: warning: incorrect type in argument 3 (different base types)
sound/soc/fsl/fsl_ssi.c:391:42:    expected unsigned int *val
sound/soc/fsl/fsl_ssi.c:391:42:    got restricted __be32 *<noident>
sound/soc/fsl/fsl_ssi.c:393:17: warning: restricted __be32 degrades to integer
sound/soc/fsl/fsl_ssi.c:393:15: warning: incorrect type in assignment (different base types)
sound/soc/fsl/fsl_ssi.c:393:15:    expected restricted __be32 [usertype] sisr2
sound/soc/fsl/fsl_ssi.c:393:15:    got unsigned int
sound/soc/fsl/fsl_ssi.c:396:50: warning: incorrect type in argument 3 (different base types)
sound/soc/fsl/fsl_ssi.c:396:50:    expected unsigned int [unsigned] val
sound/soc/fsl/fsl_ssi.c:396:50:    got restricted __be32 [usertype] sisr2
sound/soc/fsl/fsl_ssi.c:398:42: warning: incorrect type in argument 2 (different base types)
sound/soc/fsl/fsl_ssi.c:398:42:    expected unsigned int [unsigned] [usertype] sisr
sound/soc/fsl/fsl_ssi.c:398:42:    got restricted __be32 [addressable] [usertype] sisr

In other places where regmap_read() is used a u32 variable is passed
to store the register read value, so do the same here as well.

regmap API already takes care of endianness, so the usage of u32 is safe.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:18:00 +01:00
Mukunda, Vijendar
8349b7f53d
ASoC: amd: rename audio_substream_data variable
In order to make audio_substream_data structure variable
consistent throughout the code, changed the name from
audio_config to rtd wherever applicable.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:17:56 +01:00
Borislav Petkov
4dba072cd0 x86/dumpstack: Explain the reasoning for the prologue and buffer size
The whole reasoning behind the amount of opcode bytes dumped and prologue
length isn't very clear so write down some of the reasons for why it is
done the way it is.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-10-bp@alien8.de
2018-04-26 16:15:28 +02:00
Borislav Petkov
602bd705da x86/dumpstack: Save first regs set for the executive summary
Save the regs set when __die() is onvoked for the first time and print it
in oops_end().

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-9-bp@alien8.de
2018-04-26 16:15:28 +02:00
Borislav Petkov
7cccf0725c x86/dumpstack: Add a show_ip() function
... which shows the Instruction Pointer along with the insn bytes around
it. Use it whenever rIP is printed. Drop the rIP < PAGE_OFFSET check since
probe_kernel_read() can handle any address properly.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-8-bp@alien8.de
2018-04-26 16:15:27 +02:00
Borislav Petkov
ba54d856a9 x86/fault: Dump user opcode bytes on fatal faults
Sometimes it is useful to see which user opcode bytes RIP points to
when a fault happens: be it to rule out RIP corruption, to dump info
early during boot, when doing core dumps is impossible due to not having
a writable filesystem yet.

Sometimes it is useful if debugging an issue and one doesn't have access
to the executable which caused the fault in order to disassemble it.

That last aspect might have some security implications so
show_unhandled_signals could be revisited for that or a new config option
added.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-7-bp@alien8.de
2018-04-26 16:15:27 +02:00
Borislav Petkov
e8b6f98451 x86/dumpstack: Add loglevel argument to show_opcodes()
Will be used in the next patch.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-6-bp@alien8.de
2018-04-26 16:15:26 +02:00
Borislav Petkov
9e4a90fd34 x86/dumpstack: Improve opcodes dumping in the code section
The code used to iterate byte-by-byte over the bytes around RIP and that
is expensive: disabling pagefaults around it, copy_from_user, etc...

Make it read the whole buffer of OPCODE_BUFSIZE size in one go. Use a
statically allocated 64 bytes buffer so that concurrent show_opcodes()
do not interleave in the output even though in the majority of the cases
it's serialized via die_lock. Except the #PF path which doesn't...

Also, do the PAGE_OFFSET check outside of the function because latter
will be reused in other context.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-5-bp@alien8.de
2018-04-26 16:15:26 +02:00
Borislav Petkov
f0a1d7c11c x86/dumpstack: Carve out code-dumping into a function
No functionality change, carve it out into a separate function for later
changes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-4-bp@alien8.de
2018-04-26 16:15:26 +02:00
Borislav Petkov
5df61707f0 x86/dumpstack: Unexport oops_begin()
The only user outside of arch/ is not a module since

  86cd47334b ("ACPI, APEI, GHES, Prevent GHES to be built as module")

No functional changes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-3-bp@alien8.de
2018-04-26 16:15:26 +02:00
Borislav Petkov
5d12f0424e x86/dumpstack: Remove code_bytes
This was added by

  86c4183742 ("[PATCH] i386: add option to show more code in oops reports")

long time ago but experience shows that 64 instruction bytes are plenty
when deciphering an oops. So get rid of it.

Removing it will simplify further enhancements to the opcodes dumping
machinery coming in the following patches.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-2-bp@alien8.de
2018-04-26 16:15:25 +02:00
Chris Wilson
7f961d799f drm/i915: Compile out engine debug for release
The majority of the engine state dumping is too voluminous to be useful
outside of a controlled setup, though a few do accompany severe errors.
Keep the debug dumps next to the errors, but hide the others behind a CI
compile flag. This becomes more useful when adding more dumps to latency
sensitive paths.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426103219.22181-1-chris@chris-wilson.co.uk
2018-04-26 15:13:35 +01:00
Ryder Lee
3a280ed132
ASoC: mediatek: switch to SPDX license tag
Add SPDX identifiers to all remaining files in sound/soc/mediatek/

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:09:36 +01:00
Ryder Lee
eaeb4194de
ASoC: mediatek: add MT7622 AFE compatible in documentation
Add support for MT7622 AFE which shares the same binding with MT2701.

Cc: devicetree@vger.kernel.org
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:09:07 +01:00
Ryder Lee
bfdc56e548
ASoC: mediatek: add MT7622 AFE support
This patch adds support for the MT7622 AFE which reuses MT2701 driver.

We also introduce the 'struct mt2701_soc_variants' to differentiate
between the SoC generations as there might be other (existing or future)
chips that use the same binding and driver, then being a little more
abstract could help in the long run.

Cc: Jia Zeng <jia.zeng@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:09:02 +01:00
Ryder Lee
ab7b4ee986
ASoC: mediatek: Add MTK_STREAM_NUM to mtk-base-afe.h
Add MTK_STREAM_NUM to common header and modify related stuff so that
the other SoCs can reuse it.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:08:58 +01:00
Ryder Lee
cf87027360
ASoC: mediatek: simplify the control logic of MT2701 I2S
This patch adjusts the mt2701_afe_i2s_ops to simplify the control
logic of the I2S path.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:08:43 +01:00
Yazen Ghannam
da6fa7ef67 x86/smpboot: Don't use mwait_play_dead() on AMD systems
Recent AMD systems support using MWAIT for C1 state. However, MWAIT will
not allow deeper cstates than C1 on current systems.

play_dead() expects to use the deepest state available.  The deepest state
available on AMD systems is reached through SystemIO or HALT. If MWAIT is
available, it is preferred over the other methods, so the CPU never reaches
the deepest possible state.

Don't try to use MWAIT to play_dead() on AMD systems. Instead, use CPUIDLE
to enter the deepest state advertised by firmware. If CPUIDLE is not
available then fallback to HALT.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20180403140228.58540-1-Yazen.Ghannam@amd.com
2018-04-26 16:06:19 +02:00
Takashi Sakamoto
0f925660a7 ALSA: dice: fix error path to destroy initialized stream data
In error path of snd_dice_stream_init_duplex(), stream data for incoming
packet can be left to be initialized.

This commit fixes it.

Fixes: 436b5abe22 ('ALSA: dice: handle whole available isochronous streams')
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-26 15:24:54 +02:00
Rafael J. Wysocki
bd6dff55de Merge branches 'acpi-watchdog', 'acpi-button' and 'acpi-video'
* acpi-watchdog:
  ACPI / watchdog: Prefer iTCO_wdt on Lenovo Z50-70

* acpi-button:
  ACPI / button: make module loadable when booted in non-ACPI mode

* acpi-video:
  ACPI / video: Only default only_lcd to true on Win8-ready _desktops_
2018-04-26 15:11:39 +02:00
Rafael J. Wysocki
e140c4af1b Merge branches 'acpi-pm' and 'pm-cpufreq'
* acpi-pm:
  ACPI / PM: Blacklist Low Power S0 Idle _DSM for ThinkPad X1 Tablet(2016)

* pm-cpufreq:
  cpufreq: brcmstb-avs-cpufreq: remove development debug support
2018-04-26 15:10:25 +02:00
Ezequiel Garcia
73acc46b06 arm64: defconfig: Enable bluetooth USB support
Enable the Bluetooth USB controller which is present
in the RK3399 Kevin Chromebook.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:05:59 +02:00
Ezequiel Garcia
61bcbdd6f1 arm64: defconfig: Enable Marvell WiFi-Ex PCIe driver
Enable the wireless network driver to support the WiFi adapter
present in RK3399 Kevin Chromebooks. Note that this also
enables Bluetooth via USB.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:05:42 +02:00
Ezequiel Garcia
e545eb20c5 arm64: defconfig: Enable Atmel Maxtouch driver
Enable the Atmel Maxtouch driver to support the touchscreen
and touchpad present in RK3399 Kevin Chromebooks.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:05:30 +02:00
Ezequiel Garcia
e9cfce4195 arm64: defconfig: Enable HID over I2C drivers
Enable the HID-I2C driver to support the stylus
present in RK3399 Kevin Chromebooks.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:04:59 +02:00
Enric Balletbo i Serra
b839325cef arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks.
Enable following drivers for merged devices:
- ChromeOS EC RTC driver.
- ChromeOS EC userspace interface.
- ChromeOS EC light and proximity sensors.
- ChromeOS EC Barometer Sensor driver.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:02:20 +02:00
Enric Balletbo i Serra
7c8b77f815 arm64: defconfig: Enable Rockchip io-domain driver
Heiko Stübner justified pretty well the change in commit e330eb86ba
("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This
change is also needed for arm64 rockchip boards, so, do the same for arm64.

The io-domain driver is necessary to notify the soc about voltages
changes happening on supplying regulators. Probably the most important
user right now is the mmc tuning code, where the soc needs to get
notified when the voltage is dropped to the 1.8V point.

As this option is necessary to successfully tune UHS cards etc, it
should get built in. Otherwise, tuning will fail with,

   dwmmc_rockchip fe320000.dwmmc: All phases bad!
   mmc0: tuning execution failed: -5

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 14:59:02 +02:00
Enric Balletbo i Serra
54ab3747b9 arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399
Enables typec phyter and extcon driver for cable detection that is used by
USB 3.0 controller for Rockchip rk3399 SoCs.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 14:58:48 +02:00
Jiri Kosina
14d12bb858 x86/mm: Make vmemmap and vmalloc base address constants unsigned long
Commits 9b46a051e4 ("x86/mm: Initialize vmemmap_base at boot-time") and 
a7412546d8 ("x86/mm: Adjust vmalloc base and size at boot-time") lost the 
type information for __VMALLOC_BASE_L4, __VMALLOC_BASE_L5, 
__VMEMMAP_BASE_L4 and __VMEMMAP_BASE_L5 constants.

Declare them explicitly unsigned long again.

Fixes: 9b46a051e4 ("x86/mm: Initialize vmemmap_base at boot-time")
Fixes: a7412546d8 ("x86/mm: Adjust vmalloc base and size at boot-time")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1804121437350.28129@cbobk.fhfr.pm
2018-04-26 14:56:24 +02:00
Thomas Gleixner
a3ed0e4393 Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
Revert commits

92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")

As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.

As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:

* systemd kills daemons on resume, after >WatchdogSec seconds
  of suspending (Genki Sky).  [Verified that that's because systemd uses
  CLOCK_MONOTONIC and expects it to not include the suspend time.]

* systemd-journald misbehaves after resume:
  systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
  (Mike Galbraith).

* NetworkManager reports "networking disabled" and networking is broken
  after resume 50% of the time (Pavel).  [May be because of systemd.]

* MATE desktop dims the display and starts the screensaver right after
  system resume (Pavel).

* Full system hang during resume (me).  [May be due to systemd or NM or both.]

That happens on debian and open suse systems.

It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.

Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2018-04-26 14:53:32 +02:00
Thomas Gleixner
1f71addd34 tick/sched: Do not mess with an enqueued hrtimer
Kaike reported that in tests rdma hrtimers occasionaly stopped working. He
did great debugging, which provided enough context to decode the problem.

CPU 3			     	      	     CPU 2

idle
start sched_timer expires = 712171000000
 queue->next = sched_timer
					    start rdmavt timer. expires = 712172915662
					    lock(baseof(CPU3))
tick_nohz_stop_tick()
tick = 716767000000			    timerqueue_add(tmr)

hrtimer_set_expires(sched_timer, tick);
  sched_timer->expires = 716767000000  <---- FAIL
					     if (tmr->expires < queue->next->expires)
hrtimer_start(sched_timer)		          queue->next = tmr;
lock(baseof(CPU3))
					     unlock(baseof(CPU3))
timerqueue_remove()
timerqueue_add()

ts->sched_timer is queued and queue->next is pointing to it, but then
ts->sched_timer.expires is modified.

This not only corrupts the ordering of the timerqueue RB tree, it also
makes CPU2 see the new expiry time of timerqueue->next->expires when
checking whether timerqueue->next needs to be updated. So CPU2 sees that
the rdma timer is earlier than timerqueue->next and sets the rdma timer as
new next.

Depending on whether it had also seen the new time at RB tree enqueue, it
might have queued the rdma timer at the wrong place and then after removing
the sched_timer the RB tree is completely hosed.

The problem was introduced with a commit which tried to solve inconsistency
between the hrtimer in the tick_sched data and the underlying hardware
clockevent. It split out hrtimer_set_expires() to store the new tick time
in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in
the NOHZ + HIGHRES case the hrtimer might still be queued.

Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets
timer->expires after canceling the timer and move the hrtimer_set_expires()
invocation into the NOHZ only code path which is not affected as it merily
uses the hrtimer as next event storage so code pathes can be shared with
the NOHZ + HIGHRES case.

Fixes: d4af6d933c ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync")
Reported-by: "Wan Kaike" <kaike.wan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: "Marciniszyn Mike" <mike.marciniszyn@intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-rdma@vger.kernel.org
Cc: "Dalessandro Dennis" <dennis.dalessandro@intel.com>
Cc: "Fleck John" <john.fleck@intel.com>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Weiny Ira" <ira.weiny@intel.com>
Cc: "linux-rdma@vger.kernel.org"
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de
2018-04-26 14:53:32 +02:00
Boris Brezillon
bdf3a3b59a
spi: Check presence the of ->transfer[_xxx]() before registering a controller
Right now, no checks are done on the presence of a ->transfer[_xxx]()
method, which can lead to a NULL pointer dereference when someone
starts sending something on the bus.

Do the check at registration time and refuse to add the controller if
all ->transfer[_xxx]() pointers are NULL.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 13:53:29 +01:00
Arvind Yadav
a4eb490a41 HID: intel-ish-hid: use put_device() instead of kfree()
Never directly free @dev after calling device_register(), even
if it returned an error. Always use put_device() to give up the
reference initialized.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:36:43 +02:00
Christophe JAILLET
a317e55957 HID: alps: Fix some style in 't4_read_write_register()'
Better indent the code to improve readability.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:33:35 +02:00
Christophe JAILLET
69934012f3 HID: alps: Check errors returned by 't4_read_write_register()'
If only the first 't4_read_write_register()' call fails, the error code
will be overwritten and lost.
Directly report the error instead.

While at it, log some errors if 't4_read_write_register()' fails, as done
in the rest of the driver.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:33:35 +02:00
Christophe JAILLET
edb6cb3d7c HID: alps: Save a memory allocation in 't4_read_write_register()' when writing data
if 'read_flag' is false, there is no need to allocate and free memory.
We can simply avoid the memory allocation and pass NULL to kfree.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:33:35 +02:00
Christophe JAILLET
605f077290 HID: alps: Report an error if we receive invalid data in 't4_read_write_register()'
If the data received is not what is expected, we should return an error.

Otherwise, we return 0 or a positive value which will be interpreted as
success, but '*read_val' has not been updated.

Fixes: 73196ebe13 ("HID: alps: add support for Alps T4 Touchpad device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:33:35 +02:00
Arnaldo Carvalho de Melo
68766bfa56 perf top: Use __map__is_kernel()
Shorter form to figure out if a given map is the kernel one and also
reduces the number of code accessing MAP__{FUNCTION,VARIABLE}, that
should go away at some point.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-rn8pexelsxpx92ce3elu3wiw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:27 -03:00
Jiri Olsa
abc60bad00 perf stat: Display length strings of each run for --table option
Adding support to display visual aid 'length strings' to easily spot the
biggest difference in time table.

  $ perf stat -r 10 --table perf bench sched pipe
  ...

   Performance counter stats for './perf bench sched pipe' (5 runs):

             # Table of individual measurements:
             5.189 (-0.293) #
             5.189 (-0.294) #
             5.186 (-0.296) #
             5.663 (+0.181) ##
             6.186 (+0.703) ####

             # Final result:
             5.483 +- 0.198 seconds time elapsed  ( +-  3.62% )

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-9-jolsa@kernel.org
[ Updated 'perf stat --table' man page entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:27 -03:00
Jiri Olsa
e55c14af48 perf stat: Add --table option to display time of each run
Add --table option to display time for each run (-r option), like:

  $ perf stat --null -r 5 --table perf bench sched pipe

   Performance counter stats for './perf bench sched pipe' (5 runs):

             # Table of individual measurements:
             5.379 (-0.176)
             5.243 (-0.311)
             5.238 (-0.317)
             5.536 (-0.019)
             6.377 (+0.823)

             # Final result:
             5.555 +- 0.213 seconds time elapsed  ( +-  3.83% )

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-8-jolsa@kernel.org
[ Document the new option in 'perf stat's man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:27 -03:00
Jiri Olsa
bc22de9bcd perf stat: Display time in precision based on std deviation
Ingo suggested to display elapsed time for multirun workload (perf stat
-e) with precision based on the precision of the standard deviation.

In his own words:

  > This output is a slightly bit misleading:

  >  Performance counter stats for 'make -j128' (10 runs):
  >      27.988995256 seconds time elapsed                  ( +-  0.39% )

  > The 9 significant digits in the result, while only 1 is valid, suggests accuracy
  > where none exists.

  > It would be better if 'perf stat' would display elapsed time with a precision
  > adjusted to stddev, it should display at most 2 more significant digits than
  > the stddev inaccuracy.

  > I.e. in the above case 0.39% is 0.109, so we only have accuracy for 1 digit, and
  > so we should only display 3:

  >        27.988 seconds time elapsed                       ( +-  0.39% )

Plus a suggestion about the output, which is small enough and connected
with the above change that I merged both changes together.

  > Small output style nit - I think it would be nice if with --repeat the stddev was
  > also displayed in absolute values, besides percentage:
  >
  >       27.988 +- 0.109 seconds time elapsed   ( +- 0.39% )

The output is now:

   Performance counter stats for './perf bench sched pipe' (5 runs):
   SNIP
           13.3667 +- 0.0256 seconds time elapsed  ( +-  0.19% )

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:27 -03:00
Jiri Olsa
5824729735 perf check-headers.sh: Add support to check 2 independent files
Add 'check_2' function to check 2 different files, the 'check' function
stays to check files that differs only in the prefix path.

In upcoming changes we need to check header files in locations which
don't follow the prefix logic.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:26 -03:00
Jiri Olsa
15019e9815 perf check-headers.sh: Simplify arguments passing
Passing whole string instead of parsing them after.  It simplifies
things for the next patches, that adds another function call, which
makes it hard to pass arguments in the correct shape.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:26 -03:00
Ravi Bangoria
9a73c30854 perf buildid-cache: Support --purge-all option
User can remove files from cache using --remove/--purge options but both
needs list of files as an argument. It's not convenient when you want to
flush out entire cache. Add an option to purge all files from cache.

Ex,
  # perf buildid-cache -l
    8a86ef73e44067bca52cc3f6cd3e5446c783391c /tmp/a.out
    ebe71fdcf4b366518cc154d570a33cd461a51c36 /tmp/a.out.1
  # perf buildid-cache -P -v
    Removing /tmp/a.out (8a86ef73e44067bca52cc3f6cd3e5446c783391c): Ok
    Removing /tmp/a.out.1 (ebe71fdcf4b366518cc154d570a33cd461a51c36): Ok
    Purged all: Ok

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-4-ravi.bangoria@linux.vnet.ibm.com
[ Initialize 'err' in build_id_cache__purge_all(), to fix build on debian:7, as it can be used uninitialized ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:26 -03:00
Ravi Bangoria
8e1e0d7467 perf buildid-cache: Support --list option
'perf buildid-cache' allows to add/remove files into cache but there is
no option to list all cached files. Add --list option to list all
_valid_ cached files.

Ex,
  # perf buildid-cache --add /tmp/a.out
  # perf buildid-cache -l
    8a86ef73e44067bca52cc3f6cd3e5446c783391c /tmp/a.out

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-3-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:26 -03:00