Commit graph

766,493 commits

Author SHA1 Message Date
Vladimir Zapolskiy
10b4640833
spi: sh-msiof: Fix bit field overflow writes to TSCR/RSCR
The change fixes a bit field overflow which allows to write to higher
bits while calculating SPI transfer clock and setting BRPS and BRDV
bit fields, the problem is reproduced if 'parent_rate' to 'spi_hz'
ratio is greater than 1024, for instance

  p->min_div      = 2,
  MSO rate        = 33333333,
  SPI device rate = 10000

results in

  k          = 5, i.e. BRDV = 0b100 or 1/32 prescaler output,
  BRPS       = 105,
  TSCR value = 0x6804, thus MSSEL and MSIMM bit fields are non-zero.

Fixes: 65d5665bb2 ("spi: sh-msiof: Update calculation of frequency dividing")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16 15:52:44 +01:00
Stefan Agner
3c2a906953 ARM: imx_v6_v7_defconfig: enable Vybrid OCOTP driver
Enable the OCOTP NVMEM driver for Vybrid (vf610) SoCs.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-16 22:50:46 +08:00
Stefan Agner
f5750fdad2 ARM: imx_v6_v7_defconfig: add mwifiex driver
Enable Marvell mwifiex driver which is required to drive the
Wi2Wi WM828CC6 wireless module found on Colibri iMX6ULL.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-16 22:50:43 +08:00
Stefan Agner
ba3e450b25 ARM: imx_v6_v7_defconfig: add RN5T618 PMIC family support
This allows to successfully boot Colibri iMX7 which is using
the Ricoh RN5T567 PMIC.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-16 22:50:39 +08:00
Sean Paul
8089f9f5a3 Merge airlied/drm-next into drm-misc-fixes
Fast forwarding -fixes for 4.17.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-04-16 10:47:13 -04:00
Marek Vasut
52c7a088ba ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2
Add support for the DH i.MX6 Quad based SoM and a PDK2 evaluation board.
The evaluation board features three serial ports, USB OTG, USB host with
an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, mSATA, analog audio,
PCIe and HDMI video output.

All of the aforementioned features are supported by this patch.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-16 22:45:05 +08:00
Michael Ellerman
b8858581fe powerpc/lib: Fix off-by-one in alternate feature patching
When we patch an alternate feature section, we have to adjust any
relative branches that branch out of the alternate section.

But currently we have a bug if we have a branch that points to past
the last instruction of the alternate section, eg:

  FTR_SECTION_ELSE
  1:     b       2f
         or      6,6,6
  2:
  ALT_FTR_SECTION_END(...)
         nop

This will result in a relative branch at 1 with a target that equals
the end of the alternate section.

That branch does not need adjusting when it's moved to the non-else
location. Currently we do adjust it, resulting in a branch that goes
off into the link-time location of the else section, which is junk.

The fix is to not patch branches that have a target == end of the
alternate section.

Fixes: d20fe50a7b ("KVM: PPC: Book3S HV: Branch inside feature section")
Fixes: 9b1a735de6 ("powerpc: Add logic to patch alternative feature sections")
Cc: stable@vger.kernel.org # v2.6.27+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-17 00:37:48 +10:00
Jia-Ju Bai
de3d01fd85 xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add
pcistub_reg_add() is never called in atomic context.

pcistub_reg_add() is only called by pcistub_quirk_add, which is
only set in DRIVER_ATTR().

Despite never getting called from atomic context,
pcistub_reg_add() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16 10:20:45 -04:00
Jia-Ju Bai
230d211472 xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init
xen_pcibk_config_quirks_init() is never called in atomic context.

The call chains ending up at xen_pcibk_config_quirks_init() are:
[1] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <-
	pcistub_init_device() <- pcistub_seize() <- pcistub_probe()
[2] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <-
	pcistub_init_device() <- pcistub_init_devices_late() <-
	xen_pcibk_init()
pcistub_probe() is only set as ".probe" in struct pci_driver.
xen_pcibk_init() is is only set as a parameter of module_init().
These functions are not called in atomic context.

Despite never getting called from atomic context,
xen_pcibk_config_quirks_init() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16 10:20:31 -04:00
Jia-Ju Bai
9eb5f15b47 xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc
pcistub_device_alloc() is never called in atomic context.

The call chain ending up at pcistub_device_alloc() is:
[1] pcistub_device_alloc() <- pcistub_seize() <- pcistub_probe()
pcistub_probe() is only set as ".probe" in struct pci_driver.
This function is not called in atomic context.

Despite never getting called from atomic context,
pcistub_device_alloc() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16 10:20:21 -04:00
Jia-Ju Bai
bb52e3169c xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device
pcistub_init_device() is never called in atomic context.

The call chain ending up at pcistub_init_device() is:
[1] pcistub_init_device() <- pcistub_seize() <- pcistub_probe()
[2] pcistub_init_device() <- pcistub_init_devices_late() <-
	xen_pcibk_init()
pcistub_probe() is only set as ".probe" in struct pci_driver.
xen_pcibk_init() is is only set as a parameter of module_init().
These functions are not called in atomic context.

Despite never getting called from atomic context,
pcistub_init_device() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16 10:20:12 -04:00
Jia-Ju Bai
cc5cd50796 xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe
pcistub_probe() is never called in atomic context.
This function is only set as ".probe" in struct pci_driver.

Despite never getting called from atomic context,
pcistub_probe() calls kmalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16 10:19:52 -04:00
Chen Zhong
55d1d1547a mfd: mt6397: Add PMIC keys support to MT6397 driver
This patch adds compatible strings and interrupts for pmic keys
which serves as child device of MFD.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-16 15:16:11 +01:00
Chen Zhong
3e9f0b3e2b input: Add MediaTek PMIC keys support
This patch add support to handle MediaTek PMIC MT6397/MT6323 key
interrupts including pwrkey and homekey, also add setting for
long press key shutdown behavior.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-16 15:16:11 +01:00
Chen Zhong
8f59e8cb90 dt-bindings: mfd: Add bindings for the keys as subnode of PMIC
This patch adds documentation for device tree bindings for keys support
as the subnode of MT6397/MT6323 PMIC.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-16 15:16:10 +01:00
Chen Zhong
61217795de dt-bindings: input: Add document bindings for mtk-pmic-keys
This patch adds the device tree binding documentation for the MediaTek
pmic keys found on PMIC MT6397/MT6323.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-16 15:16:09 +01:00
Chen Zhong
e695d3a0b3 mfd: mt6397: Create irq mappings in mfd core driver
The core driver should create and manage irq mappings instead of
leaf drivers. This patch change to pass irq domain to
devm_mfd_add_devices() and it will create mapping for irq resources
automatically. And remove irq mapping in rtc driver since this has
been done in core driver.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-16 15:16:04 +01:00
Anson Huang
bd372250a3 ARM: dts: imx7s: add anatop vdd1p2 regulator
Add i.MX7S/D anatop vdd1p2 regulator.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-16 22:15:41 +08:00
Thor Thayer
6e8fe39989 ARM: socfpga_defconfig: Remove QSPI Sector 4K size force
Remove QSPI Sector 4K size force which is causing QSPI boot
problems with the JFFS2 root filesystem.

Fixes the following error:
     "Magic bitmask 0x1985 not found at ..."

Cc: stable@vger.kernel.org
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-16 09:14:30 -05:00
Sergei Shtylyov
faa5c3176a arm64: dts: renesas: r8a77970: add FCPVD support
Describe FCPVD0 in the R8A77970 device tree; it will be used by VSPD0 in
the next patch...

Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns@hitachi.com>.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:04:51 +02:00
Kieran Bingham
1d26a52171 ARM: dts: wheat: Fix ADV7513 address usage
The r8a7792 Wheat board has two ADV7513 devices sharing a single I2C
bus, however in low power mode the ADV7513 will reset it's slave maps to
use the hardware defined default addresses.

The ADV7511 driver was adapted to allow the two devices to be registered
correctly - but it did not take into account the fault whereby the
devices reset the addresses.

This results in an address conflict between the device using the default
addresses, and the other device if it is in low-power-mode.

Repair this issue by moving both devices away from the default address
definitions.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: f6eea82a87 ("ARM: dts: wheat: add DU support")
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:04:37 +02:00
Dinh Nguyen
d93101abe4 arm64: dts: stratix10: use clock bindings for the Stratix10 platform
Use the clock bindings for the Stratix10 SoC. This includes changing the old
binding of "intc,clk-s10-mgr" to "intel,stratix10-clkmgr". The reason that
this can be done is that there are currently no clock driver for Stratix10,
thus there are no consumers of the old binding. So changing the binding will
not break any legacy code.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v7:
- move PLL out of clkmgr node and into DT root
v6:
- no changes
v5:
- no changes
v4:
- remove '_' in name of clock nodes
- use clock-controller in SoCDK node in dts file
v3:
- use the correct vendor prefix
- explain the binding change
v2:
- use a single clock binding for the clock controller
2018-04-16 09:04:29 -05:00
Maxime Chevallier
982e05001c net: mvpp2: Fix TCAM filter reserved range
Marvell's PPv2 controller has a Packet Header parser, which uses a
fixed-size TCAM array of filter entries.

The mvpp2 driver reserves some ranges among the 256 TCAM entries to
perform MAC and VID filtering. The rest of the TCAM ids are freely usable
for other features, such as IPv4 proto matching.

This commit fixes the MVPP2_PE_LAST_FREE_TID define that sets the end of
the "free range", which included the MAC range. This could therefore allow
some other features to use entries dedicated to MAC filtering,
lowering the number of unicast/multicast addresses that could be allowed
before switching to promiscuous mode.

Fixes: 10fea26ce2 ("net: mvpp2: Add support for unicast filtering")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16 10:03:25 -04:00
Yoshihiro Shimoda
e3ddf00f87 arm64: dts: renesas: r8a77965: Add PWM device nodes
This patch adds PWM device nodes for r8a77965.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Takeshi Kihara
93b0e5643a arm64: dts: renesas: r8a77965: Add all MSIOF device nodes
Add the device nodes for all MSIOF SPI controllers.

Based on several similar patches of the R8A7796 device tree
by Geert Uytterhoeven <geert+renesas@glider.be>
and Simon Horman <horms+renesas@verge.net.au>.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Use numerical power domain indices for initial r8a77965.dtsi]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Simon Horman
e0f0bda793 arm64: dts: renesas: r8a7795: sort subnodes of the soc node
Sort subnodes of the soc node.
- The primary key is the bus address.
- The secondary key is the IP block.
- The tertiary key is the node name.

This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.

This should not have any run-time effect.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16 16:02:42 +02:00
Simon Horman
82cf1d158e arm64: dts: renesas: r8a7795: sort subnodes of the root node
Sort subnodes of the root node alphanumerically.

This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.

Also remove excessive line-wrapping of interrupts-extended property of
timer node.

This should not have any run-time effect.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16 16:02:42 +02:00
Simon Horman
3684a030bd arm64: dts: renesas: r8a7796: sort subnodes of the soc node
Sort subnodes of the soc node.
- The primary key is the bus address.
- The secondary key is the IP block.
- The tertiary key is the node name.

This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.

This should not have any run-time effect.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16 16:02:42 +02:00
Simon Horman
6ef5e21294 arm64: dts: renesas: r8a7796: sort subnodes of the root node
Sort subnodes of the root node alphanumerically.

This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.

This should not have any run-time effect.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16 16:02:42 +02:00
Magnus Damm
d2b860cb30 arm64: dts: renesas: r8a77970: Update IPMMU DS1 bit number
Judging by "R-Car-Gen3-rev0.80" IPMMU IMSSTR register documentation
for [R-Car V3M] the DS1 bit field should be bit 0.

Update the ipmmu-main property to make it match the data sheet.

Fixes: ce3b52a159 ("arm64: dts: renesas: r8a77970: Add IPMMU device nodes")
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Yoshihiro Shimoda
3a7dc06d83 arm64: dts: renesas: r8a77965: add USB 3.0 peripheral node
This patch adds USB 3.0 peripheral node for r8a77965.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Yoshihiro Shimoda
e3cee8902e arm64: dts: renesas: r8a77965: add USB 3.0 host node
This patch adds USB 3.0 host node for r8a77965.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Yoshihiro Shimoda
a06e8af801 arm64: dts: renesas: r8a77965: add HS-USB node
This patch adds HS-USB node for r8a77965.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Yoshihiro Shimoda
dc68285152 arm64: dts: renesas: r8a77965: add usb_dmac nodes
This patch adds USB-DMAC nodes for r8a77965.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Yoshihiro Shimoda
1dfa66cd90 arm64: dts: renesas: r8a77965: add USB 2.0 host nodes
This patch adds USB 2.0 host (EHCI/OHCI) nodes for r8a77965.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Yoshihiro Shimoda
7a4a541eed arm64: dts: renesas: r8a77965: add usb3_phy node
This patch adds usb3_phy node for r8a77965.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Yoshihiro Shimoda
b5857630a8 arm64: dts: renesas: r8a77965: add usb2_phy nodes
This patch add usb2_phy nodes for r8a77965.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:42 +02:00
Biju Das
d588298a30 ARM: multi_v7_defconfig: Enable r8a77470 SoC
Enable recently added r8a77470 (RZ/G1C) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:30 +02:00
Biju Das
f794fa1e8f ARM: shmobile: defconfig: Enable r8a77470 SoC
Enable recently added r8a77470 (RZ/G1C) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:30 +02:00
Yoshihiro Shimoda
d2ba004b03 dt-bindings: arm: Document Renesas Ebisu board DT bindings
This patch adds device tree bindings documentation for Renesas
Ebisu board (RTP0RC77990SEB0010S).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:12 +02:00
Yoshihiro Shimoda
6fdc4f90b4 dt-bindings: arm: Document R-Car E3 SoC DT bindings
This patch adds device tree bindings documentation for Renesas R-Car
E3 (r8a77990).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:12 +02:00
Biju Das
7625f03be3 dt-bindings: arm: Document iW-RainboW-G23S single board computer
Document the iW-RainboW-G23S single board computer device tree bindings,
listing it as a supported board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:02:12 +02:00
Biju Das
f922fb5af1 ARM: dts: iwg23s-sbc: Add support for iWave G23S-SBC based on RZ/G1C
Add support for iWave iW-RainboW-G23S single board computer based on
 RZ/G1C.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:01:55 +02:00
Biju Das
6929dfc591 ARM: dts: r8a77470: Initial SoC device tree
The initial R8A77470 SoC device tree including CPU0, GIC, timer, SYSC, RST,
CPG, and the required clock descriptions.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:01:55 +02:00
Simon Horman
5db40d7b26 ARM: dts: r7s72100: sort subnodes of root node
Sort the subnodes of the soc node to improve maintainability.
The sort has been done alphabetically with the node name as the key.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16 16:01:55 +02:00
Simon Horman
6f9fe6a652 ARM: dts: r7s72100: stop grouping clocks under a "clocks" subnode
The current practice is to not group clocks under a "clocks" subnode,
but just put them together with the other on-SoC devices.

As per updates for R-Car Gen2 SoCs by Geert Uytterhoeven.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16 16:01:55 +02:00
Simon Horman
f7255d1fa2 ARM: dts: r7s72100: sort subnodes of soc node
Sort the subnodes of the soc node to improve maintainability.
The sort key is the address on the bus with instances of the same
IP block grouped together and sorted alphabetically.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16 16:01:55 +02:00
Simon Horman
b1548238b2 ARM: dts: r7s72100: add soc node
Add soc node to represent the bus and move all nodes with a base address
into this node. This is consistent with handling of R-Car Gen3 and Gen2
SoCs in mainline. It is intended to migrate other Renesas ARM-based
SoCs to this scheme.

The ordering is derived from simply moving each node with an address up to
before any nodes without a base address that occur before the soc node.  To
improve maintainability follow-up patches will sort subnodes of both the
new soc node and the root node.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16 16:01:55 +02:00
Chris Brandt
f8ce138029 ARM: dts: r7s72100: add USB device to device tree
Add USB device support.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:01:55 +02:00
Takeshi Kihara
b0d77648e0 soc: renesas: rcar-rst: Add support for R-Car E3
Add support for R-Car E3 (R8A77990) to the R-Car RST driver.
This driver is needed for the clock driver to work.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[shimoda: rebase]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16 16:01:25 +02:00