Commit graph

766,493 commits

Author SHA1 Message Date
Eric W. Biederman
a2e102cd3c shm: Move struct shmid_kernel into ipc/shm.c
All of the users are now in ipc/shm.c so make the definition local to
that file to make code maintenance easier.  AKA to prevent rebuilding
the entire kernel when struct shmid_kernel changes.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-03-24 11:25:21 -05:00
Nicolas Pitre
1b8837b617 ARM: 8750/1: deflate_xip_data.sh: minor fixes
Send nm complaints about broken pipe (when sed exits early) to /dev/null.
All errors should be printed to stderr.
Don't trap on normal exit so the trap can return an error code.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:27:50 +00:00
Jinbum Park
73b9160d0d ARM: 8748/1: mm: Define vdso_start, vdso_end as array
Define vdso_start, vdso_end as array to avoid compile-time analysis error
for the case of built with CONFIG_FORTIFY_SOURCE.

and, since vdso_start, vdso_end are used in vdso.c only,
move extern-declaration from vdso.h to vdso.c.

If kernel is built with CONFIG_FORTIFY_SOURCE,
compile-time error happens at this code.
- if (memcmp(&vdso_start, "177ELF", 4))

The size of "&vdso_start" is recognized as 1 byte, but n is 4,
So that compile-time error is reported.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:27:49 +00:00
Arnd Bergmann
ad43fc9aa2 ARM: 8747/1: make CONFIG_DEBUG_WX depend on MMU
Without CONFIG_MMU, this results in a build failure:

./arch/arm/include/asm/memory.h:92:23: error: initializer element is not constant
 #define VECTORS_BASE  vectors_base
arch/arm/mm/dump.c:32:4: note: in expansion of macro 'VECTORS_BASE'
  { VECTORS_BASE, "Vectors" },

arch/arm/mm/dump.c:71:11: error: 'L_PTE_USER' undeclared here (not in a function); did you mean 'VTIME_USER'?
   .mask = L_PTE_USER,
           ^~~~~~~~~~

Obviously the feature only makes sense with an MMU, so let's add the
dependency here.

Fixes: a8e53c151f ("ARM: 8737/1: mm: dump: add checking for writable and executable")
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:27:48 +00:00
Fabio Estevam
1328f02005 ARM: 8746/1: vfp: Go back to clearing vfp_current_hw_state[]
Commit 384b38b669 ("ARM: 7873/1: vfp: clear vfp_current_hw_state
for dying cpu") fixed the cpu dying notifier by clearing
vfp_current_hw_state[]. However commit e5b61bafe7 ("arm: Convert VFP
hotplug notifiers to state machine") incorrectly used the original
vfp_force_reload() function in the cpu dying notifier.

Fix it by going back to clearing vfp_current_hw_state[].

Fixes: e5b61bafe7 ("arm: Convert VFP hotplug notifiers to state machine")
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:27:48 +00:00
Himanshu Jha
591298e54c Staging: iio: accel: adis16201: Move adis16201 driver out of staging
Move adis16201 driver out of staging and merge into mainline
IIO subsystem.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 14:26:19 +00:00
Himanshu Jha
6988a80ae8 Staging: iio: accel: adis16201: Fix 80 character line limit
Split the line over 80 characters limit to fix checkpatch
warning.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 14:20:13 +00:00
Himanshu Jha
15e374daf9 Staging: iio: accel: adis16201: Use GENMASK
Use GENMASK to improve readability and remove the local variables used to
store intermediate data.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 14:20:13 +00:00
Russell King
a00315d1b3 ARM: sa1100/h3xxx: switch h3xxx PCMCIA to use gpiod APIs
Switch h3xxx's PCMCIA implementation to use the gpiod APIs where
possible.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:17:09 +00:00
Russell King
780febd5b7 ARM: sa1100/cerf: convert to generic CF sockets
Convert Cerf to use the generic CF socket support.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:17:08 +00:00
Russell King
29786e9b65 ARM: sa1100/assabet: convert to generic CF sockets
Convert Assabet to use the generic CF socket support.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:17:07 +00:00
Russell King
0920ca103f ARM: sa1100: provide infrastructure to support generic CF sockets
Provide the SoC-level infrastructure to support the generic CF sockets.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:17:06 +00:00
Russell King
7be893aa2d pcmcia: sa1100: provide generic CF support
Provide generic non-voltage sensing socket support for StrongARM
platforms using the gpiolib and regulator subsystems to obtain the
resources to control the socket.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (for drivers/pcmcia)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-03-24 14:16:08 +00:00
Himanshu Jha
d8a6fc1813 Staging: iio: accel: adis16201: Remove unused headers
Remove few unused headers files since the adis core handles the buffer and
sysfs support.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 14:15:01 +00:00
Brian Masney
d15052bdb7 staging: iio: tsl2x7x: add copyright
Add Brian Masney's copyright and to the list of module authors for all
of the staging cleanups. This patch also update's Jon Brenner's current
work email address since AMS now owns TAOS.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:44:40 +00:00
Brian Masney
c9a6efd2c9 staging: iio: tsl2x7x: put local variables in reverse Christmas tree order
This patch ensures that all of the local variable declarations are in
reverse Christmas tree order where possible to increase code
readability.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:43:34 +00:00
Brian Masney
2130e243c4 staging: iio: tsl2x7x: remove ch0 and ch1 variables from tsl2x7x_get_lux()
Remove the ch0 and ch1 variables from tsl2x7x_get_lux() and
write those values directly into the chip->als_cur_info.als_ch0
and chip->als_cur_info.als_ch01 variables.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:43:04 +00:00
Brian Masney
96e6a016d7 staging: iio: tsl2x7x: remove unused variables from tsl2x7x_get_lux()
tsl2x7x_get_lux() has a ch0lux and ch1lux variables that are not used
so this patch removes them.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:40:59 +00:00
Brian Masney
490941db55 staging: iio: tsl2x7x: split out als and prox persistence settings
The struct tsl2x7x_settings contained a persistence member that
contained both the ALS and proximity persistence fields. This patch
splits this out into two separate fields so that the bitmasks in
several parts of the code are no longer necessary.

The default persistence settings are also changed by this patch from:

- Proximity: 0 (Every proximity cycle generates an interrupt)
- ALS: 255 (60 consecutive values out of range)

to something a little more reasonable based on my testing:

- Proximity: 1 (1 proximity value out of range)
- ALS: 1 (1 value outside of threshold range)

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:40:20 +00:00
Brian Masney
8bf09ec4dc staging: iio: tsl2x7x: make logging consistent and correct newlines
This patch updates all of the logging commands so that they are
consistent with the other messages, includes __func__ in the message,
and all of the messages include newlines. This patch also removes some
debug log messages.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:38:05 +00:00
Brian Masney
4123e69af2 staging: iio: tsl2x7x: split out als and prox interrupt settings
The struct tsl2x7x_settings contained an interrupts_en member that was
a bitmask for which interrupts are enabled. This required having
bitmasks in several parts of the code. This patch splits this field
out into two booleans to remove most of the bitmasks in the code.

This patch also fixes a bug where if an interrupt pin was configured,
but proximity interrupts were disabled, then the proximity value could
not be polled.

This patch also removes an unnecessary second call to writing the
control register in tsl2x7x_chip_on().

Driver tested using a TSL2772 hooked up to a Raspberry Pi 2.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:36:29 +00:00
Brian Masney
bce075d0ec staging: iio: tsl2x7x: simplify tsl2x7x_prox_cal()
tsl2x7x_prox_cal() would set the interrupt flag, and reset the device to
start doing the calibration routine. However, this did not actually
affect the readings since they are polled. This patch drops the interrupt
code.

This patch also drops the function tsl2x7x_prox_calculate() and removes
support for the standard deviation and min sample since those values
were not used.

Driver was tested using a TSL2772 hooked up to a Raspberry Pi 2. I
performed the following testing at various distances:

- Put hand in front of sensor and keep the sensor and hand stationary.
- Perform calibration routine.
- Run iio_event_monitor.
- Verify that a proximity event is triggered when my hand comes
  anywhere between the sensor and where I performed the calibration
  routine.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:35:15 +00:00
Brian Masney
85a7d0f7db staging: iio: tsl2x7x: no need to clear interrupt flag when getting lux
tsl2x7x_get_lux() does not need to clear the interrupt flag when
querying the ALS. The interrupt flag is cleared in
tsl2x7x_event_handler(). This patches removes the unnecessary code.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:34:09 +00:00
Brian Masney
9e4701eaef staging: iio: tsl2x7x: correct interrupt handler trigger
tsl2x7x_event_handler() was not called as expected when the device was
asserting a hardware interrupt. This patch changes the interrupt line
trigger from rising to falling.

The driver was tested on a TSL2772 hooked up to a Raspberry Pi 2. The
interrupt pin also had a 10K pull-up resistor per the requirements from
the datasheet. The relevant device tree binding:

&i2c1 {
	tsl2772@39 {
		compatible = "amstaos,tsl2772";
		reg = <0x39>;
		interrupt-parent = <&gpio>;
		interrupts = <22 0x2>;
	};
};

With this patch, iio_event_monitor now shows the events when the
channels are outside the defined interrupt thresholds.

$ sudo ./iio_event_monitor tsl2772
Found IIO device with name tsl2772 with device number 0
Event: time: 1478193460053760446, type: proximity, channel: 0, evtype:
thresh, direction: either
...
Event: time: 1478193463020270185, type: illuminance, channel: 0, evtype:
thresh, direction: either
...

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:32:40 +00:00
Brian Masney
c7bd25e8e2 staging: iio: tsl2x7x: remove unnecessary code
As a follow up to the work in commit a0722d05a1 ("staging: iio:
tsl2x7x: convert mutex_trylock() to mutex_lock()"), this patch removes
the unnecessary calls to tsl2x7x_get_prox() and tsl2x7x_get_lux() in
tsl2x7x_event_handler(). Previously, these functions were locked with
mutex_trylock(), but that is no longer the case. This patch also removes
a comment that is no longer relevant about returning the last sample.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:31:40 +00:00
Rodrigo Siqueira
8ea0fa7cd4 staging:iio:ade7854: Remove read_reg_* duplications
The original code had a read function per data size; after updates, all
read functions tasks were centralized in a single function, but the old
signature was kept to maintain the module working without problems. This
patch removes a set of duplications associated with read_reg_*, and
update the areas that calling the old interface by the new one.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:28:05 +00:00
Rodrigo Siqueira
e6182b2d8a staging:iio:ade7854: Rework SPI read function
Rework read SPI function to reduce the code duplication and centralizes
all the task in a single function.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:27:21 +00:00
Rodrigo Siqueira
5d55dcbc31 staging:iio:ade7854: Rework I2C read function
The read operation for the I2C function has many duplications that can
be generalized into a single function. This patch reworks the read
operation for I2C to centralizes all similar code in a single function.

It is possible to remove all the old interface to use the new one,
however, for keeping the things simple and working this patch maintain
legacy interface.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:26:45 +00:00
Rodrigo Siqueira
259a8202b6 staging:iio:ade7854: Remove write_reg_* duplications
This patch removes code duplications related to the write_reg_*
functions and centralizes them in a single function. Also, it eliminates
the legacy functions and replaces them by a unique signature that is
used by SPI and I2C.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:25:59 +00:00
Rodrigo Siqueira
418bbb6e6b staging:iio:ade7854: Rework SPI write function
The write operation using SPI has a many code duplications (similar to
I2C) and four different interfaces per data size. This patch introduces
a single function that centralizes the main task related to SPI.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:25:06 +00:00
Rodrigo Siqueira
e4c771d3a5 staging:iio:ade7854: Rework I2C write function
The write operation using I2C has many code duplications and four
different interfaces per data size. This patch introduces a single
function that centralizes the main tasks.

The central function inserted by this patch can easily replace all the
four functions related to the data size. However, this patch does not
remove any code signature for keeping the meter module work and make
easier to review this patch.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 13:24:21 +00:00
Wolfram Sang
398432edde i2c: make i2c_check_addr_validity() static
After previous refactoring, there is only one user in the same file
left. Make the function static now.

[wsa: added 'int' to bare 'unsigned']
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 14:07:23 +01:00
Hiromitsu Yamasaki
a1de3253a8 i2c: rcar: fix mask value of prohibited bit
According to documentation, Bit 7 of ICMSR is unused and 0 should be
written to it. Fix the mask accordingly.

Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
[wsa: edited commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 14:04:38 +01:00
Wolfram Sang
9d952aa2c8 dt-bindings: i2c: document R8A77965 bindings
R-Car M3-N (R8A77965) SoC has a R-Car Gen3-compatible I2C controller.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 14:04:05 +01:00
John Syne
6cef2ab016 staging:iio:ade7854: Fix the wrong number of bits to read
Fixes: correctly handle the data size in the read operation for I2C

The function ade7854_i2c_read_reg_32() have to invoke the
i2c_master_recv() for read 32 bits values, however, the counter is set
to 3 which means 24 bits. This patch fixes the wrong size of 24 bits, to
32 bits.

Signed-off-by: John Syne <john3909@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Fixes: 8d97a5877 ("staging: iio: meter: new driver for ADE7754 devices")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 12:42:26 +00:00
Wolfram Sang
0b884c22c5 - three new special cases for device tree compatible strings
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAlqyYdkACgkQEacuoBRx
 13LnHA/8CFMaR7o5ZYlDaDNizlg0Wu7oT/zEKK/erF+/3LYoYHl5FaCuFgZ6R9e3
 hEwqBkyJ1QjwhQhS4IIZn1Z34zSpXgUTXzb6+U+zWhdQNj8j+QqG81u+eLjNgcsa
 5DxOcwyEpqUTXQI2MMYxK60NHVWfJaq2VmxzKDTqZkJHiOzQsoR4H1O7tPOCDvHE
 R8uDgSamz4lRRANuxu5jONbgD04p4c+No42LLsYLo/DKUJN5rS6IbFyzURjWHaA3
 +8WA2y6bG3v6YVdIvRXfw7NCi+U/pWCbSD3OqzIQkUKnWfDLnbqCw1wRrWVPLhnE
 edpkmyHLhaXHG0vb1J4Hwq9mV4UXSb/XyH4DZp5v4EZKT4ImnI64GnDU3O+JEqXe
 upb2r0WQ7z6bA1A99GqNc0em7BI/8nXIY4LZCJXTgAkBLQq6+b3EYQGElMSiI0X6
 k638GcY87t0AaJgR2laOIx0ADgdxoabyb07v8oh2o9C1o/Ujb4AhCg5TouPHNMtS
 CZmohAY6rmPMZ9jT6GzAsGfF7+hXQ6OtSXowQ713Eez8haq8dC9wNo3DUiCCyMMv
 KssF1uPwa6pnSF3mtAFAq8wI2AqPfVcnzI14OkaxHVHrm8iWpT2+FD2kJcMAvJX0
 OGljH0WN/WTw/v8BUeyqsvOyEurglOR3dyns8IWNLnoV9R6Gzvg=
 =rCow
 -----END PGP SIGNATURE-----

Merge tag 'at24-4.17-updates-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.17

"three new special cases for device tree compatible strings"
2018-03-24 13:39:18 +01:00
Pierre-Yves MORDRET
771b7bf053 i2c: i2c-stm32f7: fix no check on returned setup
Before assigning returned setup structure check if not null

Fixes: 463a9215f3 ("i2c: stm32f7: fix setup structure")
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
2018-03-24 13:37:41 +01:00
John Syne
4297b23d92 staging:iio:ade7854: Fix error handling on read/write
The original code does not correctly handle the error related to I2C
read and write. This patch fixes the error handling related to all
read/write functions for I2C.

Signed-off-by: John Syne <john3909@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Fixes: 8d97a5877 ("staging: iio: meter: new driver for ADE7754 devices")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 12:37:02 +00:00
Chris Packham
eb49778c8c i2c: pca-platform: drop gpio from platform data
Now that the i2c-pca-plaform driver is using the device managed API for
gpios there is no need for the reset gpio to be specified via
i2c_pca9564_pf_platform_data.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:26:13 +01:00
Chris Packham
7562dee282 i2c: pca-platform: use device_property_read_u32
Use device_property_read_u32 instead of of_property_read_u32_index to
lookup the "clock-frequency" property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:26:04 +01:00
Chris Packham
0678326175 i2c: pca-platform: unconditionally use devm_gpiod_get_optional
Allow for the reset-gpios property to be defined in the device tree
or via a GPIO lookup table.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:26:00 +01:00
Chris Packham
df0d32348a sh: sh7785lcr: add GPIO lookup table for i2c controller reset
Define the GPIO connected to the PCA9564 using a GPIO lookup table. This
will allow the i2c-pca-platform driver to use the device managed APIs to
lookup the gpio instead of using platform_data.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:25:55 +01:00
Abhishek Sahu
7545c7dba1 i2c: qup: reorganization of driver code to remove polling for qup v2
Following are the major issues in current driver code

1. The current driver simply assumes the transfer completion
   whenever its gets any non-error interrupts and then simply do the
   polling of available/free bytes in FIFO.
2. The block mode is not working properly since no handling in
   being done for OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_READ.
3. An i2c transfer can contain multiple message and QUP v2
   supports reconfiguration during run in which the mode should be same
   for all the sub transfer. Currently the mode is being programmed
   before every sub transfer which is functionally wrong. If one message
   is less than FIFO length and other message is greater than FIFO
   length, then transfers will fail.

Because of above, i2c v2 transfers of size greater than 64 are failing
with following error message

	i2c_qup 78b6000.i2c: timeout for fifo out full

To make block mode working properly and move to use the interrupts
instead of polling, major code reorganization is required. Following
are the major changes done in this patch

1. Remove the polling of TX FIFO free space and RX FIFO available
   bytes and move to interrupts completely. QUP has QUP_MX_OUTPUT_DONE,
   QUP_MX_INPUT_DONE, OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ
   interrupts to handle FIFO’s properly so check all these interrupts.
2. Determine the mode for transfer before starting by checking
   all the tx/rx data length in each message. The complete message can be
   transferred either in DMA mode or Programmed IO by FIFO/Block mode.
   in DMA mode, both tx and rx uses same mode but in PIO mode, the TX and
   RX can be in different mode.
3. During write, For FIFO mode, TX FIFO can be directly written
   without checking for FIFO space. For block mode, the QUP will generate
   OUT_BLOCK_WRITE_REQ interrupt whenever it has block size of available
   space.
4. During read, both TX and RX FIFO will be used. TX will be used
   for writing tags and RX will be used for receiving the data. In QUP,
   TX and RX can operate in separate mode so configure modes accordingly.
5. For read FIFO mode, wait for QUP_MX_INPUT_DONE interrupt which
   will be generated after all the bytes have been copied in RX FIFO. For
   read Block mode, QUP will generate IN_BLOCK_READ_REQ interrupts
   whenever it has block size of available data.
6. Split the transfer in chunk of one QUP block size(256 bytes)
   and schedule each block separately. QUP v2 supports reconfiguration
   during run in which QUP can transfer multiple blocks without issuing a
   stop events.
7. Port the SMBus block read support for new code changes.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:21:02 +01:00
Abhishek Sahu
fbfab1ab06 i2c: qup: reorganization of driver code to remove polling for qup v1
Following are the major issues in current driver code

1. The current driver simply assumes the transfer completion
   whenever its gets any non-error interrupts and then simply do the
   polling of available/free bytes in FIFO.
2. The block mode is not working properly since no handling in
   being done for OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ.

Because of above, i2c v1 transfers of size greater than 32 are failing
with following error message

	i2c_qup 78b6000.i2c: timeout for fifo out full

To make block mode working properly and move to use the interrupts
instead of polling, major code reorganization is required. Following
are the major changes done in this patch

1. Remove the polling of TX FIFO free space and RX FIFO available
   bytes and move to interrupts completely. QUP has QUP_MX_OUTPUT_DONE,
   QUP_MX_INPUT_DONE, OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ
   interrupts to handle FIFO’s properly so check all these interrupts.
2. During write, For FIFO mode, TX FIFO can be directly written
   without checking for FIFO space. For block mode, the QUP will generate
   OUT_BLOCK_WRITE_REQ interrupt whenever it has block size of available
   space.
3. During read, both TX and RX FIFO will be used. TX will be used
   for writing tags and RX will be used for receiving the data. In QUP,
   TX and RX can operate in separate mode so configure modes accordingly.
4. For read FIFO mode, wait for QUP_MX_INPUT_DONE interrupt which
   will be generated after all the bytes have been copied in RX FIFO. For
   read Block mode, QUP will generate IN_BLOCK_READ_REQ interrupts
   whenever it has block size of available data.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:20:51 +01:00
Abhishek Sahu
f7714b4e45 i2c: qup: send NACK for last read sub transfers
According to I2c specification, “If a master-receiver sends a
repeated START condition, it sends a not-acknowledge (A) just
before the repeated START condition”. QUP v2 supports sending
of NACK without stop with QUP_TAG_V2_DATARD_NACK so added the
same.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:20:41 +01:00
Abhishek Sahu
6f2f0f6465 i2c: qup: fix buffer overflow for multiple msg of maximum xfer len
The BAM mode requires buffer for start tag data and tx, rx SG
list. Currently, this is being taken for maximum transfer length
(65K). But an I2C transfer can have multiple messages and each
message can be of this maximum length so the buffer overflow will
happen in this case. Since increasing buffer length won’t be
feasible since an I2C transfer can contain any number of messages
so this patch does following changes to make i2c transfers working
for multiple messages case.

1. Calculate the required buffers for 2 maximum length messages
   (65K * 2).
2. Split the descriptor formation and descriptor scheduling.
   The idea is to fit as many messages in one DMA transfers for 65K
   threshold value (max_xfer_sg_len). Whenever the sg_cnt is
   crossing this, then schedule the BAM transfer and subsequent
   transfer will again start from zero.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:20:30 +01:00
Abhishek Sahu
ecb6e1e5f4 i2c: qup: change completion timeout according to transfer length
Currently the completion timeout is being taken according to
maximum transfer length which is too high if SCL is operating in
high frequency. This patch calculates timeout on the basis of
one-byte transfer time and uses the same for completion timeout.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:20:20 +01:00
Abhishek Sahu
08f15963bc i2c: qup: use the complete transfer length to choose DMA mode
Currently each message length in complete transfer is being
checked for determining DMA mode and if any of the message length
is less than FIFO length then non DMA mode is being used which
will increase overhead. DMA can be used for any length and it
should be determined with complete transfer length. Now, this
patch selects DMA mode if the total length is greater than FIFO
length.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:20:09 +01:00
Abhishek Sahu
3f450d3eea i2c: qup: proper error handling for i2c error in BAM mode
Currently the i2c error handling in BAM mode is not working
properly in stress condition.

1. After an error, the FIFO are being written with FLUSH and
   EOT tags which should not be required since already these tags
   have been written in BAM descriptor itself.

2. QUP state is being moved to RESET in IRQ handler in case
   of error. When QUP HW encounters an error in BAM mode then it
   moves the QUP STATE to PAUSE state. In this case, I2C_FLUSH
   command needs to be executed while moving to RUN_STATE by writing
   to the QUP_STATE register with the I2C_FLUSH bit set to 1.

3. In Error case, sometimes, QUP generates more than one
   interrupt which will trigger the complete again. After an error,
   the flush operation will be scheduled after doing
   reinit_completion which should be triggered by BAM IRQ callback.
   If the second QUP IRQ comes during this time then it will call
   the complete and the transfer function will assume the all the
   BAM HW descriptors have been completed.

4. The release DMA is being called after each error which
   will free the DMA tx and rx channels. The error like NACK is very
   common in I2C transfer and every time this will be overhead. Now,
   since the error handling is proper so this release channel can be
   completely avoided.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Austin Christ <austinwc@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:19:59 +01:00
Abhishek Sahu
7e6c35fe60 i2c: qup: fix the transfer length for BAM RX EOT FLUSH tags
In case of FLUSH operation, BAM copies INPUT EOT FLUSH (0x94)
instead of normal EOT (0x93) tag in input data stream when an
input EOT tag is received during flush operation. So only one tag
will be written instead of 2 separate tags.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24 13:19:48 +01:00