Commit graph

766,493 commits

Author SHA1 Message Date
John Crispin
eb4afe3002 staging: mt7621-eth: Document ralink/mediatek SoC ethernet binding
Add possible dt binding for mediatek gigabit switches.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
8b634a9c76 staging: mt7621-mmc: MIPS: ralink: add sdhci for mt7620a SoC
NeilBrown:
  Added range-check on pdev->id before assigning ot
    host->id

  of_dma_configure() sets a default ->dma_mask of
  DMA_BIT_MASK(32), claiming devices can DMA from
  the full 32bit address space.
  The mtk-mmc driver does not support access to
  highmem pages, so it is really limited to the
  bottom 512M (actually 448M due to 64M of IO space).
  Setting ->dma_mask to NULL causes mmc_setup_queue()
  to fall-back to using BLK_BOUNCE_HIGH to tell the
  block layer to use a bounce-buffer for any highmem
  pages requiring IO.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
0853c7a53e staging: mt7621-dma: ralink: add rt2880 dma engine
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
1ab7f2a435 staging: mt7621-spi: add mt7621 support
NeilBrown:
    The code will fail with a warning if asked to transfer
    more than 32 bytes at a time.  So used max_transfer_size
    interface to tell users about this.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
16e556aa10 staging: mt7621-gpio: ralink: add mt7621 gpio controller
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
0317d60de8 staging: mt7621-pinctrl: ralink: add pinctrl driver
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00
John Crispin
03f152e31f staging: mt7621-pci: MIPS/ralink: add MT7621 pcie driver
NeilBrown: forward port and hack to work on GNUBEE1

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:01 +01:00
Bart Van Assche
818e0fa293 block: Change a rcu_read_{lock,unlock}_sched() pair into rcu_read_{lock,unlock}()
scsi_device_quiesce() uses synchronize_rcu() to guarantee that the
effect of blk_set_preempt_only() will be visible for percpu_ref_tryget()
calls that occur after the queue unfreeze by using the approach
explained in https://lwn.net/Articles/573497/. The rcu read lock and
unlock calls in blk_queue_enter() form a pair with the synchronize_rcu()
call in scsi_device_quiesce(). Both scsi_device_quiesce() and
blk_queue_enter() must either use regular RCU or RCU-sched.
Since neither the RCU-protected code in blk_queue_enter() nor
blk_queue_usage_counter_release() sleeps, regular RCU protection
is sufficient. Note: scsi_device_quiesce() does not have to be
modified since it already uses synchronize_rcu().

Reported-by: Tejun Heo <tj@kernel.org>
Fixes: 3a0a529971 ("block, scsi: Make SCSI quiesce and resume work reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin Steigerwald <martin@lichtvoll.de>
Cc: stable@vger.kernel.org # v4.15
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 12:50:10 -06:00
Sergio Paracuellos
5259b32936 staging: ks7010: replace DPRINTK traces in favour of netdev_*
This commit removes custom defined DPRINTK macro and replaces all the
associated debug and other traces for preferred ones netdev_*.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:49:49 +01:00
Sergio Paracuellos
7acf4002e3 staging: ks7010: remove useless DPRINTK traces
This commit removes some useless traces in some source files

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:49:11 +01:00
Ioana Radulescu
6a9bbe53db staging: fsl-dpaa2/eth: Fix incorrect kfree
Use netdev_alloc_frag() instead of kmalloc to allocate space for
the S/G table of egress multi-buffer frames.

This fixes a bug where an unaligned pointer received from the
allocator would be overwritten with the 64B aligned value,
leading to a wrong address being later passed to kfree.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
bcb4f0d75b staging: pi433: fix CamelCase for dagc enum
Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <normalMode>
  CHECK: Avoid CamelCase: <improve4LowModulationIndex>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
e4928ac29b staging: pi433: fix CamelCase for lnaGain enum
Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <lnaGain>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
9d985d127a staging: pi433: fix CamelCase for DIONumber variable
Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <DIONumber>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
31e045ab54 staging: pi433: fix CamelCase for bitRate variables
Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <bitRate>
  CHECK: Avoid CamelCase: <bitRate_min>
  CHECK: Avoid CamelCase: <bitRate_reg>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
803058902b staging: pi433: fix CamelCase for syncSize variable
Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <syncSize>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
4e3290dbf3 staging: pi433: fix CamelCase for preambleLength variable
Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <preambleLength>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Valentin Vidic
469b84f3f2 staging: pi433: fix CamelCase for GPIO functions
Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <setup_GPIOs>
  CHECK: Avoid CamelCase: <free_GPIOs>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
Palle Christensen
6efb21d6d0 staging:mt29f_spinand: MT29F2G failing as only 16 bits used for addressing.
For NAND flash chips with more than 1Gbit (e.g. MT29F2G) more than 16 bits
are necessary to address the correct page.

Signed-off-by: Palle Christensen <palle.christensen@microsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:46:51 +01:00
HariPrasath Elango
2ebd9ec4ac staging: wilc1000: destroy initialized mutex object
A mutex object that is initialized but not destroyed.This patch destroys
the mutex object

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:45:31 +01:00
HariPrasath Elango
3ea60ab5fa staging: wilc1000: use kmemdup instead of kmalloc and memcpy
Kmalloc followed by memcpy can be replaced by kmemdup.

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Reviewed-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:45:31 +01:00
HariPrasath Elango
50413119b6 staging: wilc1000: Destroy mutex object in deinitialization
Destroy the mutex object that is initialized in wlan_init_locks()

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Reviewed-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:45:31 +01:00
HariPrasath Elango
76c01fdd82 staging: wilc1000: Fix code block alignment
Fix the code alignment for a block of code to adhere to coding
guidelines

Signed-off-by: HariPrasath Elango <hariprasath.elango@gmail.com>
Reviewed-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:45:31 +01:00
Frank Mori Hess
e1d9fc04c4 staging: comedi: ni_mio_common: ack ai fifo error interrupts.
Ack ai fifo error interrupts in interrupt handler to clear interrupt
after fifo overflow.  It should prevent lock-ups after the ai fifo
overflows.

Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:43:24 +01:00
Pratik Jain
988f4a3b6a Staging: comedi: drivers: ni_atmio.c: fixed multi-line derefernce issue
Fixed coding style issue.

Signed-off-by: Pratik Jain <pratik.jain0509@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:43:24 +01:00
Rohit Kumar
44f6893672 drivers:staging:android:ashmem: Changing return type from int to loff_t
Changing return type from int to loff_t. Actual return type of the
function (vfs_llseek) is loff_t (long long). Here due to implicit
converion from long long to int, result will be implementation defined.

Signed-off-by: Rohit Kumar <rohit12techie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:43:24 +01:00
Phillip Potter
294fb1d2a2 staging: android: ion: Update wording in drivers/staging/android/ion/Kconfig
Changes the usage of the word 'Chose' to 'Choose' in the ION
Memory Manager Kconfig.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:43:24 +01:00
Rex Zhu
690dc62662 drm/amd/pp: Remove unneeded void * casts for Vega10
Removes unneeded void * casts for the following pointers:
hwmgr->backend
hwmgr->smu_backend

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:38:31 -05:00
Rex Zhu
2538090cb6 drm/amd/pp: Delete get_xclk function in powerplay (v2)
use asic's callback function get_xclk in amdgpu

v2: squash in removal of leftover debug info
(drm/amd/pp: Delete debug info in smu7_hwmgr.c) (Rex)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:38:31 -05:00
Shanker Donthineni
f9f5dc1950 arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening
The function SMCCC_ARCH_WORKAROUND_1 was introduced as part of SMC
V1.1 Calling Convention to mitigate CVE-2017-5715. This patch uses
the standard call SMCCC_ARCH_WORKAROUND_1 for Falkor chips instead
of Silicon provider service ID 0xC2001700.

Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19 18:35:38 +00:00
Rex Zhu
c7d30b40a2 drm/amd/pp: Clean up header file for Vega10
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:35:37 -05:00
Rex Zhu
3f9ca14a1d drm/amd/pp: Move functions to smu backend table for vega10
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:35:30 -05:00
Rex Zhu
9281c1f8a4 drm/amd/pp: Mark bunches of functins in vega10_smumgr.c static
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:35:22 -05:00
Rex Zhu
0b10f20022 drm/amd/pp: Remove dead functions in vega10_smumgr.c
use smc_table_manager function to copy/save tables to/from smu.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:35:15 -05:00
Rex Zhu
699f47951e drm/amdgpu: Delete dead code when early init
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19 13:34:46 -05:00
Suzuki K Poulose
7206dc93a5 arm64: Expose Arm v8.4 features
Expose the new features introduced by Arm v8.4 extensions to
Arm v8-A profile.

These include :

 1) Data indpendent timing of instructions. (DIT, exposed as HWCAP_DIT)
 2) Unaligned atomic instructions and Single-copy atomicity of loads
    and stores. (AT, expose as HWCAP_USCAT)
 3) LDAPR and STLR instructions with immediate offsets (extension to
    LRCPC, exposed as HWCAP_ILRCPC)
 4) Flag manipulation instructions (TS, exposed as HWCAP_FLAGM).

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19 18:14:27 +00:00
Suzuki K Poulose
847ecd3fa3 arm64: Documentation: cpu-feature-registers: Remove RES0 fields
Remove the invisible RES0 field entries from the table, listing
fields in CPU ID feature registers, as :
 1) We are only interested in the user visible fields.
 2) The field description may not be up-to-date, as the
    field could be assigned a new meaning.
 3) We already explain the rules of the fields which are not
    visible.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19 18:14:26 +00:00
Ard Biesheuvel
350e1dad0d arm64: asm: drop special versions of adr_l/ldr_l/str_l for modules
Now that we started keeping modules within 4 GB of the core kernel
in all cases, we no longer need to special case the adr_l/ldr_l/str_l
macros for modules to deal with them being loaded farther away.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19 18:14:26 +00:00
Arnd Bergmann
bd99f9a159 arm64: fix undefined reference to 'printk'
The printk symbol was intended as a generic address that is always
exported, however that turned out to be false with CONFIG_PRINTK=n:

ERROR: "printk" [arch/arm64/kernel/arm64-reloc-test.ko] undefined!

This changes the references to memstart_addr, which should be there
regardless of configuration.

Fixes: a257e02579 ("arm64/kernel: don't ban ADRP to work around Cortex-A53 erratum #843419")
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19 18:14:25 +00:00
Bjorn Helgaas
6846b3b512 PCI: Report quirks that take more than 10ms
With "initcall_debug", we report how long every PCI quirk took.

Even without "initcall_debug", report the runtime of any quirk that takes
longer than 10ms.  This is to make it easier to notice quirks that slow
down boot.

This was motivated by a report from Paul Menzel that PCI final quirks took
half a second at boot.

Link: https://lkml.kernel.org/r/44cada166e42007d27b4c3e3aa0744d7@molgen.mpg.de
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:08:38 -05:00
Bjorn Helgaas
d89bd9195d PCI: Report quirk timings with pci_info() instead of pr_debug()
With "initcall_debug", we report how long every PCI quirk took.  Previously
we used pr_debug(), which means you have to figure out how to enable debug
output.

Log these timings using pci_info() instead so it doesn't depend on DEBUG,
CONFIG_DYNAMIC_DEBUG, etc.

Also, don't log anything at all unless "initcall_debug" is specified.  This
matches what we do in do_one_initcall_debug().

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:08:38 -05:00
Bjorn Helgaas
f9ea894ca5 PCI/VPD: Move VPD structures to vpd.c
The VPD-related structures are only used in vpd.c, so move them from
drivers/pci/pci.h to vpd.c.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:34 -05:00
Bjorn Helgaas
996058573b PCI/VPD: Move VPD quirks to vpd.c
Move the VPD-related quirks from quirks.c to vpd.c, which removes the need
for struct pci_vpd outside vpd.c.  The goal is to encapsulate all the VPD
code and structures in vpd.c.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:24 -05:00
Bjorn Helgaas
b1c615c48f PCI/VPD: Move VPD sysfs code to vpd.c
Move the VPD-related sysfs code from pci-sysfs.c to vpd.c.  This follows
the pattern of pcie_aspm_create_sysfs_dev_files().  The goal is to
encapsulate all the VPD code and structures in vpd.c.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:17 -05:00
Bjorn Helgaas
f0eb77ae6b PCI/VPD: Move VPD access code to vpd.c
Move the VPD-related code from access.c to vpd.c.  The goal is to
encapsulate all the VPD code and structures in vpd.c.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:11 -05:00
Bodong Wang
61147f391a IB/mlx5: Packet packing enhancement for RAW QP
Enable RAW QP to be able to configure burst control by modify_qp. By
using burst control with rate limiting, user can achieve best
performance and accuracy. The burst control information is passed by
user through udata.

This patch also reports burst control capability for mlx5 related
hardwares, burst control is only marked as supported when both
packet_pacing_burst_bound and packet_pacing_typical_size are
supported.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 11:55:13 -06:00
Bodong Wang
05d3ac978e net/mlx5: Packet pacing enhancement
Add two new parameters: max_burst_sz and typical_pkt_size (both
in bytes) to rate limit configurations.

max_burst_sz: The device will schedule bursts of packets for an
SQ connected to this rate, smaller than or equal to this value.
Value 0x0 indicates packet bursts will be limited to the device
defaults. This field should be used if bursts of packets must be
strictly kept under a certain value.

typical_pkt_size: When the rate limit is intended for a stream of
similar packets, stating the typical packet size can improve the
accuracy of the rate limiter. The expected packet size will be
the same for all SQs associated with the same rate limit index.

Ethernet driver is updated according to this change, but these two
parameters will be kept as 0 due to lacking of proper way to get the
configurations from user space which requires to change
ndo_set_tx_maxrate interface.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 11:54:41 -06:00
Andy Shevchenko
fec0ef3f52 clk: Re-use DEFINE_SHOW_ATTRIBUTE() macro
...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 10:50:52 -07:00
Peter Maydell
063f12e0de KVM: arm: Reserve bit in KVM_REG_ARM encoding for secure/nonsecure
We have a KVM_REG_ARM encoding that we use to expose KVM guest registers
to userspace. Define that bit 28 in this encoding indicates secure vs
nonsecure, so we can distinguish the secure and nonsecure banked versions
of a banked AArch32 register.

For KVM currently, all guest registers are nonsecure, but defining
the bit is useful for userspace. In particular, QEMU uses this
encoding as part of its on-the-wire migration format, and needs to be
able to describe secure-bank registers when it is migrating (fully
emulated) EL3-enabled CPUs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19 17:45:38 +00:00
Marc Zyngier
5fbb0df6f6 kvm/arm fixes for 4.16, take 2
- Peace of mind locking fix in vgic_mmio_read_pending
 - Allow hw-mapped interrupts to be reset when the VM resets
 - Fix GICv2 multi-source SGI injection
 - Fix MMIO synchronization for GICv2 on v3 emulation
 - Remove excess verbosity on the console
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAlqqp/cVHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDAGkP/2LMhFN561PKlqgu5V4hFvowJiXb
 Gbb/qi095vtDGccbKmJKAZp3jyOM2oJEMUkx5RBYglWjW0mxb3zPAAxhldXiqv/2
 CrOGGlS/FwfyIjCt7870pltDOIgRmk8Fv/MyQjjGKF6VAghd6yVHIZiOUjiriUyz
 6hNyc2znLm0tBqm4j3HTXKHpD23YseW387pQoeQ03/WiXiZ60O3e3k0yppXO81qE
 b7TGT4Bz04mxlAISZVZeTmG7P7P4ej6+NhOH+1kxacseLzHdECPBA0JRcwRpfLkP
 5JFodUOX7/KHpvpMLUxRNRnLBei9WUL4o2LAEV0qDaj7nlAud0kKUm22RLaVKDm+
 8FSUQ12XKqnZsRrl6IizU1oAb1I1iV3j9HF5iNf3mk9AO27REGk0b8fDyRzDj300
 xpySgvIgA+f+EyY+3ve0AmEUa5QKz/WLuik2ZCqpVOuufrO8XpS+zjn1L1tzTlkR
 95EahDA7enutw47G0uWtxoPMeU4HTZS/CAiFwUbq8BEK7T3Rct7UySPLwgeYBoji
 MUlCRhPyAANCJmtO6rpOS3htkQ3XkkO1DVIGLuWC5Zl00W1T5I5+VRrVL1YI4v3O
 d2ui9r5X5Vmg4OUdhr2D9fXgPWWKEbqD90jv40rGLsMl0g/IwrC+o2VxgYxSeu5x
 CLUYILwEA5NDZSof
 =iyYE
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-fixes-for-v4.16-2' into HEAD

Resolve conflicts with current mainline
2018-03-19 17:43:01 +00:00