Commit graph

766,493 commits

Author SHA1 Message Date
Doug Ledford
2ea32cd6c7 mlx5-updates-2018-02-28-2 (IPSec-2)
This series follows our previous one to lay out the foundations for IPSec
 in user-space and extend current kernel netdev IPSec support. As noted in
 our previous pull request cover letter "mlx5-updates-2018-02-28-1 (IPSec-1)",
 the IPSec mechanism will be supported through our flow steering mechanism.
 Therefore, we need to change the initialization order. Furthermore, IPsec
 is also supported in both egress and ingress. Since our current flow
 steering is egress only, we add an empty (only implemented through FPGA
 steering ops) egress namespace to handle that case. We also implement
 the required flow steering callbacks and logic in our FPGA driver.
 
 We extend the FPGA support for ESN and modifying a xfrm too. Therefore, we
 add support for some new FPGA command interface that supports them. The
 other required bits are added too. The new features and requirements are
 advertised via cap bits.
 
 Last but not least, we revise our driver's accel_esp API. This API will be
 shared between our netdev and IB driver, so we need to have all the required
 functionality from both worlds.
 
 Regards,
 Aviad and Matan
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJaoH8zAAoJEEg/ir3gV/o+h00H/RyM1xoGCzJtvQAYEhNcEfvY
 YJfaJSPvuuvS2Fvs8meUzjqQvKcmkMjmViD3Ujuzyh6Y36IcoPWlBojRDE2fpz2b
 yRaK5CotcLpfDXchlLnH5ZZbOgO374866viCVoM4i2ls19Ml730piDs8CDcA6+T7
 3W4vvr977xl9bFqDMMbeldijZ3+H36Exnq6Xj+o2j6Sc1/om9Mvgw7XJhcpiBTW5
 ZFfA7djz7TdSyBJDQsLteL/wLbLsLeqXmKCKX9BsqRo+rpoUWmskKFNC1Dj0bzX3
 XbrdR8GoHVMS1PZAPJIbc1bubhqBznxrbh/g95PInSkGZzKKWw1dhS/3fkkAndM=
 =Fodq
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2018-02-28-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next

mlx5-updates-2018-02-28-2 (IPSec-2)

This series follows our previous one to lay out the foundations for IPSec
in user-space and extend current kernel netdev IPSec support. As noted in
our previous pull request cover letter "mlx5-updates-2018-02-28-1 (IPSec-1)",
the IPSec mechanism will be supported through our flow steering mechanism.
Therefore, we need to change the initialization order. Furthermore, IPsec
is also supported in both egress and ingress. Since our current flow
steering is egress only, we add an empty (only implemented through FPGA
steering ops) egress namespace to handle that case. We also implement
the required flow steering callbacks and logic in our FPGA driver.

We extend the FPGA support for ESN and modifying a xfrm too. Therefore, we
add support for some new FPGA command interface that supports them. The
other required bits are added too. The new features and requirements are
advertised via cap bits.

Last but not least, we revise our driver's accel_esp API. This API will be
shared between our netdev and IB driver, so we need to have all the required
functionality from both worlds.

Regards,
Aviad and Matan

Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-13 15:49:34 -04:00
Mike Snitzer
e8f74a0f00 dm mpath: eliminate need to use scsi_device_from_queue
Instead of scsi_device_from_queue(), use scsi_dh_attached_handler_name()
-- whose implementation uses scsi_device_from_queue() to avoid trying to
access SCSI-specific resources from non-SCSI devices.

Fixes buildbot reported issue when CONFIG_SCSI isn't set:
 ERROR: "scsi_device_from_queue" [drivers/md/dm-multipath.ko] undefined!

Fixes: 8d47e65948 ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-13 15:09:56 -04:00
Mike Snitzer
c37366742b dm mpath: fix uninitialized 'pg_init_wait' waitqueue_head NULL pointer
Initialize all the scsi_dh related 'struct multipath' members regardless
of whether a scsi_dh is in use or not.

The subtle (and fragile) SCSI-assuming legacy code clearly needs further
decoupling from non-SCSI (and/or developer understanding).

Fixes: 8d47e65948 ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Reported-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-13 15:09:56 -04:00
Florian Fainelli
e5c851ef01 This pull request brings in one last patch to add the BCM2835 DPI
controller to the device tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE/JuuFDWp9/ZkuCBXtdYpNtH8nugFAlqoCd4ACgkQtdYpNtH8
 nuhFXA//UIwpBatEd5H/7hZP8hK4GAo2Mpc2H/9uejcWlddv/FOFhC1eSHR3Iy36
 QCTrkMHALGtZk+c8xbMdfPWriYMtD7jP0/S9fesjkBrrhAKWoKTdl2pefLXFw3Gy
 /c0h1dKsHfOwkXAz7gR8uN17ueZNmDg050PxaVvGihl7oZFZnAklwrgHDR8zaEoL
 jNanP70SW2EiOSirjKOM6p7z8yMAlnCOXkDxdVIXmhfaz7PEBQllCFgmPGvolgdb
 fURIYK4YXFekifE7VESsHCr/xBaNHgAq6T72JkNMb/86QiECTkHQk7rYlFjlj6Xk
 cx9hT4LRWKOlhbSHXyN6uZ1YKHTczClSLpayL+4DJsw5wHJwsE+hCZx8KbdmB7lN
 Kl2MsYdM1BY2R48pBos+4td8OnxyzpKBnx/CQI0KS0Dp3UdEfLhzPsTXvr9MWyJL
 aLYI6AyAXx4yyI9F39rJFn3xBTe+sJJQ+z0ucYgQjX3VGhcYb/fPHOdMj3wqDwr7
 crTmsEdUrYLaPbhVPMmYbu5dSvw6OYKVKxxSmdR2MJk1dYgV82NTgADP2UzRXelz
 ZS0XSJSDUkJPFJv537zCzHfCqdsHAIa1iS+v+3Z/befFM/QVg3PYIGe12CDUVqQ5
 rc4hoAe3c/3MGUCQrcEHLM8MT7KBLgNkGqzTzq4lkwYYsKNMxDU=
 =VkjF
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJaqBwcAAoJEIfQlpxEBwcE8JwP/A5r7zRxuA9Yopsc0enWsxsY
 mkpkmhL18vk3t0BYuvTqAsV5aX2nnuXclbfrkMmVk6V1VYcRmaoRNGHLl8j19utl
 G5dunS0zZ3M5zcYlvX5l37H/NQ2LLn5R660Gdpb5GNnVRiy5TMZSRZHBqbYeI2su
 Z4PJu1D27QJJNw4OmU9mR8xuB41PaCxDMUNhIvAr75xuWfKhnZ1nKmzdn833ypH/
 ug3EGuKLR+m9EgrU3YeL8p2loaYzriIyMwu2hPX/XCfdmBhRPT+gluA2hUMenDET
 b2yyKJchLB8nWmteYmMdR5rohvVeAN8x+7ThJQJ88Kr+1TSDhfrgjLno7Rb5CC+J
 1I4mwe2o/qciXOmTxKda7eUbrSOuOlZVQa+bZOduYqv9REupGksY29pgVqB7M+hT
 3O6o+0pkvkOJMmh/JnKwonG37VieeGNOjmAOpHSk2UU/fU/RAhK7CVuez8wGYnoH
 a3IVk6X8KXXshkxml0tms4jElm48Fh9A5ieGVOGRY8YmRS+djvjiLBWVW9i9kO/N
 IPqqMOWbbbW9K+nFag4QGB/DvhNfSis7QHNsBxEzCQE4DONAyFq3SdXBqX6HlMRH
 P6zjuMeoJDcuFDms3qL3MtKkFAGLhUPHzCt2Zo1ZGa5iz7whe0Jn7Ncf+BSgAyXD
 EA9ubKJhVRzFsmJ2HAAT
 =Kedm
 -----END PGP SIGNATURE-----

Merge tag 'bcm2835-dt-next-2018-03-13' into devicetree/next

This pull request brings in one last patch to add the BCM2835 DPI
controller to the device tree.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-03-13 11:44:16 -07:00
Geert Uytterhoeven
eb21089c32 arm64: dts: renesas: r8a7795: Add missing SYS-DMAC2 dmas
On R-Car H3, on-chip peripheral modules that can make use of DMA are
wired to either SYS-DMAC0 only, or to both SYS-DMAC1 and SYS-DMAC2.

Add the missing DMA properties pointing to SYS-DMAC2 for HSCIF[0-2],
SCIF[0125], and I2C[0-2].  These were initially left out because early
firmware versions prohibited using SYS-DMAC2.  This restriction has been
lifted in IPL and Secure Monitor Rev1.0.6 (released on Feb 25, 2016).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:43:04 +01:00
Simon Horman
9dd660eb1c arm64: dts: renesas: r8a7795: Add IPMMU-PV1 device node
Add r8a7795 IPMMU-PV1 and keep it disabled by default.

This device is not present in r8a7795 ES1.x and
is removed from the DT of those SoCs.

This corrects an omission in
3b7e7848f0 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes")

This does not have any runtime effect.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2018-03-13 19:16:19 +01:00
Geert Uytterhoeven
c7a99343cc arm64: dts: renesas: r8a77970: sort subnodes of root node alphabetically
Sort root sub-nodes alphabetically for allow for easier maintenance of
this file.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:19 +01:00
Sergei Shtylyov
7859eb31e4 arm64: dts: renesas: eagle: add I2C0 support
Define the Eagle board dependent part of the I2C0 device node.

The I2C0 bus is populated by ON Semiconductor PCA9653 I/O expander and
Analog Devices ADV7511W HDMI transmitter (but we're only describing the
former chip now).

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:18 +01:00
Sergei Shtylyov
cbfa278e20 arm64: dts: renesas: r8a77970: add I2C support
Define the generic R8A77970 parts of the I2C[0-4] device node.

Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns@hitachi.com>.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:17 +01:00
Geert Uytterhoeven
972952d39f arm64: dts: renesas: r8a77965-salvator-xs: Add SoC name to file header
Document clearly which SoC this DTS applies to, to distinguish from
Salvator-XS boards equipped with other SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:16 +01:00
Jacopo Mondi
862a61d0e4 arm64: dts: renesas: r8a77965: Add EtherAVB device node
Populate the ethernet@e6800000 device node to enable Ethernet interface
for R-Car M3-N (R8A77965) SoC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:15 +01:00
Jacopo Mondi
95c969d12e arm64: dts: renesas: r8a77970: Set EtherAVB phy mode to "rgmii"
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board
files override it if the installed PHY layer provides delays for the
RX/TX channels.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:14 +01:00
Jacopo Mondi
e9131e54d1 arm64: dts: renesas: r8a77995: Set EtherAVB phy mode to "rgmii"
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board
files override it if the installed PHY layer provides delays for the
RX/TX channels.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:14 +01:00
Jacopo Mondi
fd685e2eba arm64: dts: renesas: r8a7795: Set EtherAVB phy mode to "rgmii"
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board
files override it if the installed PHY layer provides delays for the
RX/TX channels.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:13 +01:00
Jacopo Mondi
f2402dfd57 arm64: dts: renesas: r8a7796: Set EtherAVB phy mode to "rgmii"
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board
files override it if the installed PHY layer provides delays for the
RX/TX channels.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:12 +01:00
Jacopo Mondi
9dcd1f26b9 arm64: dts: renesas: v3msk: Override EtherAVB phy-mode
As the PHY interface installed on the V3MSK board provides TX and RX
channels delays, make the "phy-mode" property a board-specific one,
meant to override the one specified in the SoC DTSI.

Follow up patches will reset the r8a77970 SoC DTSI to use "rgmii"
mode and let the board file override that.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:11 +01:00
Jacopo Mondi
e5daa084cc arm64: dts: renesas: eagle: Override EtherAVB phy-mode
As the PHY interface installed on the Eagle board provides TX and RX
channels delays, make the "phy-mode" property a board-specific one,
meant to override the one specified in the SoC DTSI.

Follow up patches will reset the r8a77970 SoC DTSI to use "rgmii" mode
and let the board file override that.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:10 +01:00
Jacopo Mondi
9c63dcd4df arm64: dts: renesas: draak: Override EtherAVB phy-mode
As the PHY interface installed on the Draak board, provides TX
channel delay, make the "phy-mode" property a board-specific one, meant
to override the one specified in the SoC DTSI.

Follow up patches will reset the r8a77995 SoC DTSI to use "rgmii" mode
and let the board file override that.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:10 +01:00
Jacopo Mondi
b3635b18bb arm64: dts: renesas: ulcb: Override EtherAVB phy-mode
As the PHY interface installed on the ULCB board provides TX
channel delay, make the "phy-mode" property a board-specific one, meant
to override the one specified in the SoC DTSI.

Follow up patches will reset the r8a7795/96 SoC DTSI to use "rgmii" mode\
and let the board files override that.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:09 +01:00
Jacopo Mondi
3438ff82dd arm64: dts: renesas: salvator-common: Override EtherAVB phy-mode
As the PHY interface installed on the Salvator-X[S] board, provides TX
channel delay, make the "phy-mode" property a board-specific one, meant
to override the one specified in the SoC DTSI.

Follow up patches will reset the r8a7795/96/965 SoC DTSI to use "rgmii"
mode and let the board files override that.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:08 +01:00
Geert Uytterhoeven
ba03b432f5 arm64: dts: renesas: r8a77965: Add INTC-EX device node
Populate the device node for the Interrupt Controller for External
Devices (INTC-EX) on R-Car M3-N, which serves external IRQ pins
IRQ[0-5].

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:16:02 +01:00
Arnd Bergmann
be9fc0971a net: fix sysctl_fb_tunnels_only_for_init_net link error
The new variable is only available when CONFIG_SYSCTL is enabled,
otherwise we get a link error:

net/ipv4/ip_tunnel.o: In function `ip_tunnel_init_net':
ip_tunnel.c:(.text+0x278b): undefined reference to `sysctl_fb_tunnels_only_for_init_net'
net/ipv6/sit.o: In function `sit_init_net':
sit.c:(.init.text+0x4c): undefined reference to `sysctl_fb_tunnels_only_for_init_net'
net/ipv6/ip6_tunnel.o: In function `ip6_tnl_init_net':
ip6_tunnel.c:(.init.text+0x39): undefined reference to `sysctl_fb_tunnels_only_for_init_net'

This adds an extra condition, keeping the traditional behavior when
CONFIG_SYSCTL is disabled.

Fixes: 79134e6ce2 ("net: do not create fallback tunnels for non-default namespaces")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13 14:15:21 -04:00
Wim Van Sebroeck
2e8ebed6ed Merge branch 'v4.16-fixes' 2018-03-13 19:14:41 +01:00
Brian Norris
8c088370c2 watchdog: dw: save/restore control and timeout across suspend/resume
Some platforms lose this state in suspend. It should be safe to do this
unconditionally.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13 19:14:19 +01:00
Brian Norris
a81abbb412 watchdog: dw: RMW the control register
RK3399 has rst_pulse_length in CONTROL_REG[4:2], determining the length
of pulse to issue for system reset. We shouldn't clobber this value,
because that might make the system reset ineffective. On RK3399, we're
seeing that a value of 000b (meaning 2 cycles) yields an unreliable
(partial?) reset, and so we only fully reset after the watchdog fires a
second time. If we retain the system default (010b, or 8 clock cycles),
then the watchdog reset is much more reliable.

Read-modify-write retains the system value and improves reset
reliability.

It seems we were intentionally clobbering the response mode previously,
to ensure we performed a system reset (we don't support an interrupt
notification), so retain that explicitly.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13 19:14:18 +01:00
Alexey Khoroshilov
3c578cd4bc watchdog: sprd_wdt: Fix error handling in sprd_wdt_enable()
If clk_prepare_enable(wdt->rtc_enable) fails,
wdt->enable clock is left enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13 19:14:18 +01:00
Milton Miller
d2fc8db691 watchdog: aspeed: Fix translation of reset mode to ctrl register
Assert RESET_SYSTEM bit for any reset and set MODE field from reset
type.

The watchdog control register has a RESET_SYSTEM bit that is really
closer to activate a reset, and RESET_SYSTEM_MODE field that chooses
how much to reset.

Before this patch, a node without these optional property would do a
SOC reset, but a node with properties requesting a cpu or SOC reset
would do nothing and a node requesting a system reset would do a
SOC reset.

Fixes: b7f0b8ad25 ("drivers/watchdog: ASPEED reference dev tree properties for config")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13 19:14:17 +01:00
Geert Uytterhoeven
8952792267 arm64: dts: renesas: r8a77965: Add IIC-DVFS device node
Populate the device node for the IIC Bus Interface for DVFS (IIC for
DVFS) on R-Car M3-N, and add an alias to fix its bus number.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:08 +01:00
Takeshi Kihara
19591a9b41 arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-N
Add initial support for the Renesas Salvator-XS (Salvator-X 2nd version)
development board equipped with an R-Car M3-N SiP.

Most features are enabled through the shared salvator-xs.dtsi board
description.  The memory configuration is specific to the M3-N SiP.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Switch to SPDX-License-Identifier, update patch description]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:07 +01:00
Jacopo Mondi
fe6746059b arm64: dts: renesas: r8a77965: Move usb2_phy1 up
Move "usb2_ph1" place-holder device node next to "usb2_phy0" one.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:06 +01:00
Jacopo Mondi
f5af77016b arm64: dts: renesas: r8a77965: Add #interrupt-cells property
Add "#interrupt-cells" property and "interrupt-controller" label to
"interrupt-controller@e61c0000" device node.

This silences the following DTC compiler warnings:
Warning (interrupts_property): Missing interrupt-controller or
interrupt-map property in /soc/interrupt-controller@e61c0000
Warning (interrupts_property): Missing #interrupt-cells in
interrupt-parent /soc/interrupt-controller@e61c000

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:06 +01:00
Jacopo Mondi
eccdd3f13a arm64: dts: renesas: r8a77965: Add #pwm-cells property
Add "#pwm-cells" property to "pwm@e6e31000" device node.

This silences the following DTC compiler warning:
Warning (pwms_property): Missing property '#pwm-cells' in node
/soc/pwm@e6e31000 or bad phandle (referred from /backlight:pwms[0])

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:05 +01:00
Jacopo Mondi
8a93a58145 arm64: dts: renesas: r8a77965: Add #phy-cells property
Add "#phy-cells" property to "usb-phy@e65ee000" device node.

This silences the following DTC compiler warning:
Warning (phys_property): Missing property '#phy-cells' in node
/soc/usb-phy@e65ee000 or bad phandle (referred from
/soc/usb@ee020000:phys[0])

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:04 +01:00
Jacopo Mondi
217a7d465b arm64: dts: renesas: r8a77965: Remove stale reg property
Remove "reg" property from cache-controller-0 device node as it does not
have any unit address.

This silences the following DTC compiler warning:
Warning (unit_address_vs_reg): Node /cpus/cache-controller-0 has a reg
or ranges property, but no unit name

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:04 +01:00
Jacopo Mondi
ba8b5ad0af arm64: dts: renesas: r8a77965: Add #address-cells and #size-cells
Add "#address-cells" and "#size-cells" properties to all place-holder nodes
that have children nodes defined by salvator-x[s].dtsi device tree.

This silences the following DTC compiler warnings:
Warning (reg_format): "reg" property in /soc/.. has invalid length (4 bytes)
(#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells
value for /soc/...
Warning (avoid_default_addr_size): Relying on default #size-cells value
for /soc/...

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:03 +01:00
Jacopo Mondi
9e1b00a2ef arm64: dts: renesas: r8a77965: Add "reg" properties
Add "reg" properties to place-holder nodes with unit address defined for
R-Car M3-N SoC.

This silences the following DTC compiler warning:
Warning (unit_address_vs_reg): Node /soc/... has a unit name,
but no reg property

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:02 +01:00
Jacopo Mondi
e34ca96b81 arm64: dts: renesas: r8a77965: Add GPIO nodes
Add GPIO nodes to r8a77965 SoC device tree file.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:01 +01:00
Jacopo Mondi
0ea5b2fd38 arm64: dts: renesas: r8a77965: Add SCIF device nodes
Add SCIF[0-5] device nodes for M3-N (r8a77965) SoC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:01 +01:00
Jacopo Mondi
838c1121ca arm64: dts: renesas: r8a77965: Add dmac device nods
Add dmac[0-2] device nodes for R-Car M3-N (r8a77965) SoC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:06:00 +01:00
Jacopo Mondi
5a2cd7e849 arm64: dts: renesas: Add R-Car Salvator-x M3-N support
Add basic support for R-Car Salvator-X M3-N (R8A77965) board.

Based on original work from:
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Magnus Damm <damm+renesas@opensource.se>

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:05:59 +01:00
Jacopo Mondi
df863d6f95 arm64: dts: renesas: initial R8A77965 SoC device tree
Basic support for the Gen 3 R-Car M3-N SoC.

Based on original work from:
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Magnus Damm <damm+renesas@opensource.se>

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:05:58 +01:00
Jacopo Mondi
fd60ea3171 arm64: add Renesas R8A77965 support
Add configuration option for the R-Car M3-N (R8A77965) SoC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:05:58 +01:00
Dien Pham
85618efe14 arm64: dts: renesas: r8a7795: Update OPPs to support CA53 dfs
Describe frequencies, other than the default for CA53 cores.  This is a
pre-requisite for using providing alternative frequencies for use with
CPUFreq with these cores.

Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:05:52 +01:00
Dien Pham
fbdad84cc7 arm64: dts: renesas: r8a7796: Update OPPs to support CA53 dfs
Describe frequencies, other than the default for CA53 cores.  This is a
pre-requisite for using providing alternative frequencies for use with
CPUFreq with these cores.

Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13 19:05:26 +01:00
Christoph Hellwig
17cb960f29 bsg: split handling of SCSI CDBs vs transport requeues
The current BSG design tries to shoe-horn the transport-specific
passthrough commands into the overall framework for SCSI passthrough
requests.  This has a couple problems:

 - each passthrough queue has to set the QUEUE_FLAG_SCSI_PASSTHROUGH flag
   despite not dealing with SCSI commands at all.  Because of that these
   queues could also incorrectly accept SCSI commands from in-kernel
   users or through the legacy SCSI_IOCTL_SEND_COMMAND ioctl.
 - the real SCSI bsg queues also incorrectly accept bsg requests of the
   BSG_SUB_PROTOCOL_SCSI_TRANSPORT type
 - the bsg transport code is almost unredable because it tries to reuse
   different SCSI concepts for its own purpose.

This patch instead adds a new bsg_ops structure to handle the two cases
differently, and thus solves all of the above problems.  Another side
effect is that the bsg-lib queues also don't need to embedd a
struct scsi_request anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-13 11:40:24 -06:00
Christoph Hellwig
ef6fa64f9b bsg-lib: remove bsg_job.req
Users of the bsg-lib interface should only use the bsg_job data structure
and not know about implementation details of it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-13 11:40:23 -06:00
Christoph Hellwig
31156ec378 bsg-lib: introduce a timeout field in struct bsg_job
The zfcp driver wants to know the timeout for a bsg job, so add a field
to struct bsg_job for it in preparation of not exposing the request
to the bsg-lib users.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-13 11:40:21 -06:00
Miguel Ojeda
26a2c54d03 auxdisplay: img-ascii-lcd: Silence 2 uninitialized warnings
The warnings are:

  drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used
  uninitialized in this function [-Wuninitialized]

At lines 109 and 207. Reported by Geert using the build service
several times, e.g.:

  https://lkml.org/lkml/2018/2/19/303

They are two false positives, since num_chars > 0 in the three present
configurations (boston, malta, sead3). Initialize to 0 in order to
silence the warning.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13 18:16:38 +01:00
Miguel Ojeda
6a78b4dde1 auxdisplay: img-ascii-lcd: Fix doc comment to silence warnings
Compiling with W=1 with gcc 7.2.0 gives 2 warnings:

  drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or
  member 't' not described in 'img_ascii_lcd_scroll'
  drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function
  parameter 'arg' description in 'img_ascii_lcd_scroll'

Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13 18:13:34 +01:00
Miguel Ojeda
5617c599bb auxdisplay: panel: Change comments to silence fallthrough warnings
Compiling with W=1 with gcc 7.2.0 gives 3 warnings like:

  drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’:
  drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall
  through [-Wimplicit-fallthrough=]

Cc: Willy Tarreau <w@1wt.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-03-13 18:12:09 +01:00