Enable Tegra186 CPU frequency scaling support by default.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove Variable Length Array from fs/reiserfs/reiserfs.h. EMPTY_DIR_SIZE
is used as an array size and as it is using strlen() it need not be
evaluated at compile time. Change it's definition to use sizeof() to
force evaluation of array length at compile time.
Signed-off-by: Kyle Spiers <kyle@spiers.me>
Signed-off-by: Jan Kara <jack@suse.cz>
etnaviv_sched_dependency() and etnaviv_sched_run_job() are only
used in this file, so make them static.
This fixes the following sparse warnings:
drivers/gpu/drm/etnaviv/etnaviv_sched.c:30:18: warning: symbol 'etnaviv_sched_dependency' was not declared. Should it be static?
drivers/gpu/drm/etnaviv/etnaviv_sched.c:81:18: warning: symbol 'etnaviv_sched_run_job' was not declared. Should it be static?
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The Page Table Array is a new first level structure above the MTLB
availabale on GPUs with the security feature. Use the PTa to set up
the MMU when the security related states are handled by the kernel driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Remove the need to check that __mips_isa_rev is defined by using the
newly added MIPS_ISA_REV.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18678/
Signed-off-by: James Hogan <jhogan@kernel.org>
Remove the need to check that __mips_isa_rev is defined by using the
newly added MIPS_ISA_REV.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18677/
Signed-off-by: James Hogan <jhogan@kernel.org>
Remove the need to check that __mips_isa_rev is defined by using the
newly added MIPS_ISA_REV.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: "Maciej W. Rozycki" <macro@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18675/
Signed-off-by: James Hogan <jhogan@kernel.org>
There are multiple instances in the kernel where we need to include or
exclude particular instructions based on the ISA revision of the target
processor. For MIPS32 / MIPS64, the compiler exports a __mips_isa_rev
define. However, when targeting MIPS I - V, this define is absent. This
leads to each use of __mips_isa_rev having to check that it is defined
first. To simplify this, introduce the isa-rev.h header which always
exports MIPS_ISA_REV. The name is changed so as to avoid confusion with
the compiler builtin and to avoid accidentally using the builtin.
MIPS_ISA_REV is defined to the compilers builtin if provided, or 0,
which satisfies all current usages.
Suggested-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18676/
Signed-off-by: James Hogan <jhogan@kernel.org>
The generic MIPS implementations of halting, powering down or restarting
the system all hang using a busy loop as a last resort. We have many
platforms which avoid this loop by implementing their own, many using
some variation upon executing a wait instruction to lower CPU power
usage if we reach this point.
In order to prepare for cleaning up these various custom implementations
of the same thing, this patch makes the generic machine_halt(),
machine_power_off() & machine_restart() functions each make use of the
wait instruction to lower CPU power usage in cases where we know that
the wait instruction is available. If wait isn't known to be supported
then we fall back to calling cpu_wait(), and if we don't have a
cpu_wait() callback then we effectively continue using a busy loop.
In effect the new machine_hang() function provides a superset of the
functionality that the various platforms currently provide differing
subsets of.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17178/
Signed-off-by: James Hogan <jhogan@kernel.org>
On GPUs with the security feature the MTLB config is stored in the PTA.
Add a function to trigger the initial PTA load through the FE.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
GPUs with support for the security features need some additional
setup to get the frontend started.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
With the introduction of GPU security we have 3 different modes of
GPU operation:
- GPU core doesn't have security features -> no handling required
- the security related states are handled by the kernel driver
- the security related states are handled by a TrustZone application
Add a enum to differentiate between the different operation modes.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
New versions of the Vivante kernel driver don't trust the hardware feature
bits anymore, but use an internal hardware database. This also includes
more feature fields than are available in hardware.
As we can't trust the hardware feature bits to be correct anymore, we need
to replicate the HWDB in etanviv. For now only the GC7000L as found on
the i.MX8M is supported.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Update the state HI and common header from rnndb commit
8478eef32fd9 (rnndb: document secure GPU reset bit).
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The slave interface clock is a clock input found on newer cores to gate
the register interface. For now we simply ungate it when the GPU is in
active state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Split out the fault dumping, as this will get more complex in the future.
Also there is no need to read and dump the fault address from MMUs that
didn't signal a fault.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Replace sscanf() with mac_pton().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17982/
Signed-off-by: James Hogan <jhogan@kernel.org>
tasklet_action() + tasklet_hi_action() are almost identical. Move the
common code from both function into __tasklet_action_common() and let
both functions invoke it with different arguments.
[ bigeasy: Splitted out from RT's "tasklet: Prevent tasklets from going
into infinite spin in RT" and added commit message]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Julia Cartwright <juliac@eso.teric.us>
Link: https://lkml.kernel.org/r/20180227164808.10093-3-bigeasy@linutronix.de
__tasklet_schedule() and __tasklet_hi_schedule() are almost identical.
Move the common code from both function into __tasklet_schedule_common()
and let both functions invoke it with different arguments.
[ bigeasy: Splitted out from RT's "tasklet: Prevent tasklets from going
into infinite spin in RT" and added commit message. Use
this_cpu_ptr(headp) in __tasklet_schedule_common() as suggested
by Julia Cartwright ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Julia Cartwright <juliac@eso.teric.us>
Link: https://lkml.kernel.org/r/20180227164808.10093-2-bigeasy@linutronix.de
Returning the base of the allocated interrupt range from irq_sim_init() and
devm_irq_sim_init() allows users to handle the logic of associating irq
numbers with any other driver-specific resources without having to use
irq_sim_irqnum().
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-4-brgl@bgdev.pl
As discussed with Marc Zyngier: irq_sim_init() and its devres variant
should return the base of the allocated interrupt range on success rather
than 0.
Make devm_irq_sim_init() check for an error code. This is a preparatory
change for modifying irq_sim_init() itself.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-3-brgl@bgdev.pl
kfree() is used in the irq_sim code but slab.h is pulled in indirectly via
irq.h. Include it explicitly.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-2-brgl@bgdev.pl
We don't want to preserve the DDI A 4 lane bit on ICL.
Fixes: 3d2011cfa4 ("drm/i915/icl: remove port A/E lane sharing limitation.")
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306104155.3526-1-jani.nikula@intel.com
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM.
Compile testing on architecture without HAS_IOMEM causes "unmet direct
dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig".
Add the proper dependency to the ATMEL_ST config.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com
When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and
kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a
HARDIRQ-safe->HARDIRQ-unsafe deadlock:
================================
WARNING: inconsistent lock state
4.16.0-rc4+ #1 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
takes:
__schedule+0xbe/0xaf0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock+0x2a/0x40
scheduler_tick+0x47/0xf0
...
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rq->lock);
<Interrupt>
lock(&rq->lock);
*** DEADLOCK ***
1 lock held by rcu_torture_rea/724:
rcu_torture_read_lock+0x0/0x70
stack backtrace:
CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
lock_acquire+0x90/0x200
? __schedule+0xbe/0xaf0
_raw_spin_lock+0x2a/0x40
? __schedule+0xbe/0xaf0
__schedule+0xbe/0xaf0
preempt_schedule_irq+0x2f/0x60
retint_kernel+0x1b/0x2d
RIP: 0010:rcu_read_unlock_special+0x0/0x680
? rcu_torture_read_unlock+0x60/0x60
__rcu_read_unlock+0x64/0x70
rcu_torture_read_unlock+0x17/0x60
rcu_torture_reader+0x275/0x450
? rcutorture_booster_init+0x110/0x110
? rcu_torture_stall+0x230/0x230
? kthread+0x10e/0x130
kthread+0x10e/0x130
? kthread_create_worker_on_cpu+0x70/0x70
? call_usermodehelper_exec_async+0x11a/0x150
ret_from_fork+0x3a/0x50
This happens with the following even sequence:
preempt_schedule_irq();
local_irq_enable();
__schedule():
local_irq_disable(); // irq off
...
rcu_note_context_switch():
rcu_note_preempt_context_switch():
rcu_read_unlock_special():
local_irq_save(flags);
...
raw_spin_unlock_irqrestore(...,flags); // irq remains off
rt_mutex_futex_unlock():
raw_spin_lock_irq();
...
raw_spin_unlock_irq(); // accidentally set irq on
<return to __schedule()>
rq_lock():
raw_spin_lock(); // acquiring rq->lock with irq on
which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause
deadlocks in scheduler code.
This problem was introduced by commit 02a7c234e5 ("rcu: Suppress
lockdep false-positive ->boost_mtx complaints"). That brought the user
of rt_mutex_futex_unlock() with irq off.
To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with
*lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock()
with irq off.
Fixes: 02a7c234e5 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints")
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20180309065630.8283-1-boqun.feng@gmail.com
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios.
Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.
Fixes: c69f43fb4f ("ARM: davinci: hawk: use gpio descriptor for mmc pins")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: add a note on where the chip label is set]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Intel Titan Ridge is the next Thunderbolt 3 controller. The ICM firmware
message format in Titan Ridge differs from Falcon Ridge and Alpine Ridge
somewhat because it is using route strings addressing devices. In
addition to that the DMA port of 4-channel (two port) controller is in
different port number than the previous controllers. There are some
other minor differences as well.
This patch add support for Intel Titan Ridge and the new ICM firmware
message format.
Signed-off-by: Radion Mirchevsky <radion.mirchevsky@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This new security level works so that it creates one PCIe tunnel to the
connected Thunderbolt dock, removing PCIe links downstream of the dock.
This leaves only the internal USB controller visible.
Display Port tunnels are created normally.
While there make sure security sysfs attribute returns "unknown" for any
future security level.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Preboot ACL is a mechanism that allows connecting Thunderbolt devices
boot time in more secure way than the legacy Thunderbolt boot support.
As with the legacy boot option, this also needs to be enabled from the
BIOS before booting is allowed. Difference to the legacy mode is that
the userspace software explicitly adds device UUIDs by sending a special
message to the ICM firmware. Only the devices listed in the boot ACL are
connected automatically during the boot. This works in both "user" and
"secure" security levels.
We implement this in Linux by exposing a new sysfs attribute (boot_acl)
below each Thunderbolt domain. The userspace software can then update
the full list as needed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
In various cases, Thunderbolt device can be connected by ICM on boot
without waiting for approval from user. Most cases are related to
OEM-specific BIOS configurations. This information is interesting for
user-space as if the device isn't in SW ACL, it may create a friction in
the user experience where the device is automatically authorized if it's
connected on boot but requires an explicit user action if connected
after OS is up. User-space can use this information to suggest adding
the device to SW ACL for auto-authorization on later connections.
Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Intel Titan Ridge uses slightly different format for ICM driver ready
response, so add a new ->driver_ready() callback to struct icm and move
the existing handling to a separate function which we then use in Falcon
Ridge and Alpine Ridge.
No functional changes intended.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
We will be using this from Titan Ridge support code as well so make it
constant.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
This is needed by the new ICM interface to find xdomains by route string
instead of link and depth.
While there update existing tb_xdomain_find_* functions to use
tb_xdomain_get() instead of open-coding the same.
Signed-off-by: Radion Mirchevsky <radion.mirchevsky@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
With the new ICM messaging there is need for find switch by route string
instead of link and depth. Add new function that makes it possible.
Signed-off-by: Radion Mirchevsky <radion.mirchevsky@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Sometimes there is need for increasing reference count of a switch as
well. This also follows what we have for xdomains.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Use correct name in kernel-doc of tb_switch_find_by_uuid().
Signed-off-by: Radion Mirchevsky <radion.mirchevsky@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
The newer ICM will not use link and depth to address devices. Instead it
uses route strings. In order to take advantage of the existing code
factor out common operations so that we can use the same functions with
the new ICM as well.
No functional changes intended.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
The ICM firmware rejects devices if the maximum topology limit is
exceeded (more than 6 devices are connected). If that happens just log a
message to the kernel message buffer and bail out.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Sometimes during cold boot ICM has not yet authenticated the active NVM
image leading to timeout and failing the driver probe. Allow ICM to take
some more time and increase the timeout to 3 seconds before we give up.
While there fix icm_firmware_init() to return the real error code
without overwriting it with -ENODEV.
Fixes: f67cf49117 ("thunderbolt: Add support for Internal Connection Manager (ICM)")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
In some case reading root switch config space takes longer than what we
are currently waiting in the driver resulting timeout and failure.
Increase number of retries to allow some more time for the root switch
config space to become accesssible.
Also log an error if the timeout is exceeded so we know why the driver
probe failed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
If the Thunderbolt domain adding fails for some reason we currently
always return -EIO instead of the real error code. To make debugging
easier return the actual error code instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
If the system is suspended and user disconnects cable to another host
and connects it to a Thunderbolt device instead we get a warning from
driver core about adding duplicate sysfs attribute and adding the new
device fails.
Handle this properly so that we first remove the existing XDomain
connection before adding new devices.
Fixes: d1ff70241a ("thunderbolt: Add support for XDomain discovery protocol")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
We need to make sure a new PCIe tunnel is not created in a middle of
previous PCI rescan because otherwise the rescan code might find too
much and fail to reconfigure devices properly. This is important when
native PCIe hotplug is used. In BIOS assisted hotplug there should be no
such issue.
Fixes: f67cf49117 ("thunderbolt: Add support for Internal Connection Manager (ICM)")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
The driver misses implementation of PM hook that undoes what
->freeze_noirq() does after the hibernation image is created. This means
the control channel is not resumed properly and the Thunderbolt bus
becomes useless in later stages of hibernation (when the image is stored
or if the operation fails).
Fix this by pointing ->thaw_noirq to driver nhi_resume_noirq(). This
makes sure the control channel is resumed properly.
Fixes: 23dd5bb49d ("thunderbolt: Add suspend/hibernate support")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
use_cmma in kvm_arch means that the KVM hypervisor is allowed to use
cmma, whereas use_cmma in the mm context means cmm has been used before.
Let's rename the context one to uses_cmm, as the vm does use
collaborative memory management but the host uses the cmm assist
(interpretation facility).
Also let's introduce use_pfmfi, so we can remove the pfmfi disablement
when we activate cmma and rather not activate it in the first place.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1518779775-256056-2-git-send-email-frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some facilities should only be provided to the guest, if they are
enabled by a CPU model. This allows us to avoid capabilities and
to simply fall back to the cpumodel for deciding about a facility
without enabling it for older QEMUs or QEMUs without a CPU
model.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When pinning a file under the BPF virtual file system (traditionally
/sys/fs/bpf), using a dot in the name of the location to pin at is not
allowed. For example, trying to pin at "/sys/fs/bpf/foo.bar" will be
rejected with -EPERM.
This check was introduced at the same time as the BPF file system
itself, with commit b2197755b2 ("bpf: add support for persistent
maps/progs"). At this time, it was checked in a function called
"bpf_dname_reserved()", which made clear that using a dot was reserved
for future extensions.
This function disappeared and the check was moved elsewhere with commit
0c93b7d85d ("bpf: reject invalid names right in ->lookup()"), and the
meaning of the dot ban was lost.
The present commit simply adds a comment in the source to explain to the
reader that the usage of dots is reserved for future usage.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Originally we were inlining gen8_cs_irq_handler() and so expected the
compiler to constant-fold away the irq_shift (so we had hardcoded it as
opposed to use engine->irq_shift). However, we dropped the inline given
the proliferation of gen8_cs_irq_handler()s. If we pull the shifting
of the iir into the caller, we can shrink the code still further:
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-34 (-34)
Function old new delta
gen8_cs_irq_handler 123 118 -5
gen8_gt_irq_handler 261 248 -13
gen11_irq_handler 722 706 -16
v2: Drop gen11_cs_irq_handler now that it is a simple
stub around gen8_cs_irq_handler (Daniele)
References: 5d3d69d5c1 ("drm/i915: Stop inlining the execlists IRQ handler")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309010808.11921-1-chris@chris-wilson.co.uk
Jiri Benc says:
====================
Currently, 'make bpf' in the tools/ directory does not provide the
standard quiet output except for bpftool (which is however listed
with a wrong directory). Worse, it does not respect the build output
directory.
The 'make bpf_install' does not work as one would expect, either.
It installs unconditionally to /usr/bin without respecting DESTDIR
and prefix.
This patchset improves that behavior.
====================
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>