Commit graph

766,493 commits

Author SHA1 Message Date
Mathieu Malaterre
3fc5ee9b28 powerpc: Add missing prototype
Add one missing prototype for function rh_dump_blk. Fix warning treated as
error in W=1:

  arch/powerpc/lib/rheap.c:740:6: error: no previous prototype for ‘rh_dump_blk’ [-Werror=missing-prototypes]

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:43 +10:00
Mathieu Malaterre
c3f0515ea1 powerpc/52xx: Add missing functions prototypes
The function prototypes were declared within a `#ifdef CONFIG_PPC_LITE5200`
block which would prevent them from being visible when compiling
`mpc52xx_pm.c`. Move the prototypes outside of the `#ifdef` block to fix
the following warnings treated as errors with W=1:

  arch/powerpc/platforms/52xx/mpc52xx_pm.c:58:5: error: no previous prototype for ‘mpc52xx_pm_prepare’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/52xx/mpc52xx_pm.c:113:5: error: no previous prototype for ‘mpc52xx_pm_enter’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/52xx/mpc52xx_pm.c:181:6: error: no previous prototype for ‘mpc52xx_pm_finish’ [-Werror=missing-prototypes]

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:42 +10:00
Mathieu Malaterre
f72cf3f1d4 powerpc/powermac: Add missing prototype for note_bootable_part()
Add a missing prototype for function `note_bootable_part` to silence a
warning treated as error with W=1:

  arch/powerpc/platforms/powermac/setup.c:361:12: error: no previous prototype for ‘note_bootable_part’ [-Werror=missing-prototypes]

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:42 +10:00
Mathieu Malaterre
f91d599899 powerpc/powermac: Move pmac_pfunc_base_install prototype to header file
The pmac_pfunc_base_install prototype was declared in powermac/smp.c since
function was used there, move it to pmac_pfunc.h header to be visible in
pfunc_base.c. Fix a warning treated as error with W=1:

  arch/powerpc/platforms/powermac/pfunc_base.c:330:12: error: no previous prototype for ‘pmac_pfunc_base_install’ [-Werror=missing-prototypes]

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:41 +10:00
Mathieu Malaterre
910be6be6c powerpc/chrp/pci: Make some functions static
These functions can all be static, make it so. Fix warnings treated as
errors with W=1:

  arch/powerpc/platforms/chrp/pci.c:34:5: error: no previous prototype for ‘gg2_read_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:61:5: error: no previous prototype for ‘gg2_write_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:97:5: error: no previous prototype for ‘rtas_read_config’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/pci.c:112:5: error: no previous prototype for ‘rtas_write_config’ [-Werror=missing-prototypes]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:41 +10:00
Mathieu Malaterre
5a4b475cf8 powerpc/powermac: Mark variable x as unused
Since the value of x is never intended to be read, declare it with gcc
attribute as unused. Fix warning treated as error with W=1:

  arch/powerpc/platforms/powermac/bootx_init.c:471:21: error: variable ‘x’ set but not used [-Werror=unused-but-set-variable]

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:40 +10:00
Mathieu Malaterre
f0e0b86638 powerpc/chrp/setup: Remove idu_size variable and make some functions static
Remove variable declaration idu_size and associated code since not used.

These functions can all be static, make it so. Fix warnings treated as
errors with W=1:

  arch/powerpc/platforms/chrp/setup.c:97:6: error: no previous prototype for ‘chrp_show_cpuinfo’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:302:13: error: no previous prototype for ‘chrp_setup_arch’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:385:16: error: variable ‘idu_size’ set but not used [-Werror=unused-but-set-variable]
  arch/powerpc/platforms/chrp/setup.c:526:13: error: no previous prototype for ‘chrp_init_IRQ’ [-Werror=missing-prototypes]
  arch/powerpc/platforms/chrp/setup.c:559:1: error: no previous prototype for ‘chrp_init2’ [-Werror=missing-prototypes]

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:40 +10:00
Mathieu Malaterre
eed6964bce powerpc/wii: Make hlwd_pic_init function static
The function hlwd_pic_init can be made static, so do it. Fix the following
warning treated as error (W=1):

../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:158:20: error: no previous prototype for ‘hlwd_pic_init’ [-Werror=missing-prototypes]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:39 +10:00
Mathieu Malaterre
85aa4b9841 powerpc/mm/radix: Use do/while(0) trick for single statement block
In commit 7a22d6321c ("powerpc/mm/radix: Update command line parsing for
disable_radix") an `if` statement was added for a possible empty body
(prom_debug).

Fix the following warning, treated as error with W=1:

  arch/powerpc/kernel/prom_init.c:656:46: error: suggest braces around empty body in an ‘if’ statement [-Werror=empty-body]

Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:39 +10:00
Mathieu Malaterre
d8731527ac powerpc/sparse: Fix plain integer as NULL pointer warning
Trivial fix to remove the following sparse warnings:

  arch/powerpc/kernel/module_32.c:112:74: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/module_32.c:117:74: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1155:28: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1230:20: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1385:36: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:1752:23: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2084:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2110:32: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2167:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:2183:19: warning: Using plain integer as NULL pointer
  drivers/macintosh/via-pmu.c:277:20: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:155:67: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:247:27: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:249:27: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/setup.c:252:37: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:127:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:148:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:44:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:57:21: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/tlb_hash32.c:87:21: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:160:31: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:167:22: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:274:21: warning: Using plain integer as NULL pointer
  arch/powerpc/kernel/btext.c:285:31: warning: Using plain integer as NULL pointer
  arch/powerpc/include/asm/hugetlb.h:204:16: warning: Using plain integer as NULL pointer
  arch/powerpc/mm/ppc_mmu_32.c:170:21: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/pci.c:1227:23: warning: Using plain integer as NULL pointer
  arch/powerpc/platforms/powermac/pci.c:65:24: warning: Using plain integer as NULL pointer

Also use `--fix` command line option from `script/checkpatch --strict` to
remove the following:

  CHECK: Comparison to NULL could be written "!dispDeviceBase"
  #72: FILE: arch/powerpc/kernel/btext.c:160:
  +	if (dispDeviceBase == NULL)

  CHECK: Comparison to NULL could be written "!vbase"
  #80: FILE: arch/powerpc/kernel/btext.c:167:
  +	if (vbase == NULL)

  CHECK: Comparison to NULL could be written "!base"
  #89: FILE: arch/powerpc/kernel/btext.c:274:
  +	if (base == NULL)

  CHECK: Comparison to NULL could be written "!dispDeviceBase"
  #98: FILE: arch/powerpc/kernel/btext.c:285:
  +	if (dispDeviceBase == NULL)

  CHECK: Comparison to NULL could be written "strstr"
  #117: FILE: arch/powerpc/kernel/module_32.c:117:
  +		if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != NULL)

  CHECK: Comparison to NULL could be written "!Hash"
  #130: FILE: arch/powerpc/mm/ppc_mmu_32.c:170:
  +	if (Hash == NULL)

  CHECK: Comparison to NULL could be written "Hash"
  #143: FILE: arch/powerpc/mm/tlb_hash32.c:44:
  +	if (Hash != NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #152: FILE: arch/powerpc/mm/tlb_hash32.c:57:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #161: FILE: arch/powerpc/mm/tlb_hash32.c:87:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #170: FILE: arch/powerpc/mm/tlb_hash32.c:127:
  +	if (Hash == NULL) {

  CHECK: Comparison to NULL could be written "!Hash"
  #179: FILE: arch/powerpc/mm/tlb_hash32.c:148:
  +	if (Hash == NULL) {

  ERROR: space required after that ';' (ctx:VxV)
  #192: FILE: arch/powerpc/platforms/powermac/pci.c:65:
  +	for (; node != NULL;node = node->sibling) {

  CHECK: Comparison to NULL could be written "node"
  #192: FILE: arch/powerpc/platforms/powermac/pci.c:65:
  +	for (; node != NULL;node = node->sibling) {

  CHECK: Comparison to NULL could be written "!region"
  #201: FILE: arch/powerpc/platforms/powermac/pci.c:1227:
  +	if (region == NULL)

  CHECK: Comparison to NULL could be written "of_get_property"
  #214: FILE: arch/powerpc/platforms/powermac/setup.c:155:
  +		if (of_get_property(np, "cache-unified", NULL) != NULL && dc) {

  CHECK: Comparison to NULL could be written "!np"
  #223: FILE: arch/powerpc/platforms/powermac/setup.c:247:
  +		if (np == NULL)

  CHECK: Comparison to NULL could be written "np"
  #226: FILE: arch/powerpc/platforms/powermac/setup.c:249:
  +		if (np != NULL) {

  CHECK: Comparison to NULL could be written "l2cr"
  #230: FILE: arch/powerpc/platforms/powermac/setup.c:252:
  +			if (l2cr != NULL) {

  CHECK: Comparison to NULL could be written "via"
  #243: FILE: drivers/macintosh/via-pmu.c:277:
  +	if (via != NULL)

  CHECK: Comparison to NULL could be written "current_req"
  #252: FILE: drivers/macintosh/via-pmu.c:1155:
  +	if (current_req != NULL) {

  CHECK: Comparison to NULL could be written "!req"
  #261: FILE: drivers/macintosh/via-pmu.c:1230:
  +	if (req == NULL || pmu_state != idle

  CHECK: Comparison to NULL could be written "!req"
  #270: FILE: drivers/macintosh/via-pmu.c:1385:
  +			if (req == NULL) {

  CHECK: Comparison to NULL could be written "!pp"
  #288: FILE: drivers/macintosh/via-pmu.c:2084:
  +	if (pp == NULL)

  CHECK: Comparison to NULL could be written "!pp"
  #297: FILE: drivers/macintosh/via-pmu.c:2110:
  +	if (count < 1 || pp == NULL)

  CHECK: Comparison to NULL could be written "!pp"
  #306: FILE: drivers/macintosh/via-pmu.c:2167:
  +	if (pp == NULL)

  CHECK: Comparison to NULL could be written "pp"
  #315: FILE: drivers/macintosh/via-pmu.c:2183:
  +	if (pp != NULL) {

Link: https://github.com/linuxppc/linux/issues/37
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:38 +10:00
Mathieu Malaterre
7cf76a68f1 powerpc/altivec: Add missing prototypes for altivec
Some functions prototypes were missing for the non-altivec code. Add the
missing prototypes in a new header file, fix warnings treated as errors
with W=1:

  arch/powerpc/lib/xor_vmx_glue.c:18:6: error: no previous prototype for ‘xor_altivec_2’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:29:6: error: no previous prototype for ‘xor_altivec_3’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:40:6: error: no previous prototype for ‘xor_altivec_4’ [-Werror=missing-prototypes]
  arch/powerpc/lib/xor_vmx_glue.c:52:6: error: no previous prototype for ‘xor_altivec_5’ [-Werror=missing-prototypes]

The prototypes were already present in <asm/xor.h> but this header file is
meant to be included after <include/linux/raid/xor.h>. Trying to re-use
<asm/xor.h> directly would lead to warnings such as:

  arch/powerpc/include/asm/xor.h:39:15: error: variable ‘xor_block_altivec’ has initializer but incomplete type

Trying to re-use <asm/xor.h> after <include/linux/raid/xor.h> in
xor_vmx_glue.c would in turn trigger the following warnings:

  include/asm-generic/xor.h:688:34: error: ‘xor_block_32regs’ defined but not used [-Werror=unused-variable]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:38 +10:00
Mathieu Malaterre
eae5f709a4 powerpc: Add __printf verification to prom_printf
__printf is useful to verify format and arguments. Fix arg mismatch
reported by gcc, remove the following warnings (with W=1):

  arch/powerpc/kernel/prom_init.c:1467:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1471:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1504:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1505:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1506:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1507:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1508:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1509:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:1975:39: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’
  arch/powerpc/kernel/prom_init.c:1986:27: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2567:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2567:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2569:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
  arch/powerpc/kernel/prom_init.c:2569:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’

The patch also include arg mismatch fix for case with #define DEBUG_PROM
(warning not listed here).

This patch fix also the following warnings revealed by checkpatch:

  WARNING: Prefer using '"%s...", __func__' to using 'alloc_up', this function's name, in a string
  #101: FILE: arch/powerpc/kernel/prom_init.c:1235:
  + prom_debug("alloc_up(%lx, %lx)\n", size, align);

and

  WARNING: Prefer using '"%s...", __func__' to using 'alloc_down', this function's name, in a string
  #138: FILE: arch/powerpc/kernel/prom_init.c:1278:
  + prom_debug("alloc_down(%lx, %lx, %s)\n", size, align,

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:37 +10:00
Michael Ellerman
2e0986d761 powerpc/xmon: Update paca fields dumped in xmon
The set of paca fields we dump in xmon has gotten somewhat out of
date. Update to add some recently added fields.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:37 +10:00
Michael Ellerman
9ce53e2726 powerpc/xmon: Realign paca dump fields
We've added some fields with longer names since we originally wrote
this, so the fields are no longer lined up. Adjust the widths to make
it all look nice again, eg:

  0:mon> dp
  paca for cpu 0x0 @ c000000001fa0000:
   possible                  = yes
   ...
   slb_shadow            [0] = 0xc000000008000000 0x400ea1b217000500
   slb_shadow            [1] = 0xd000000008000001 0x400d43642f000510
   ...
   rfi_flush_fallback_area   = c0000000fff80000   (0xcc8)
   ...
   accounting.starttime_user = 0x51582f07         (0xae8)

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:36 +10:00
Mathieu Malaterre
e70d8f5526 powerpc/xmon: Add __printf annotation to xmon_printf()
This allows the compiler to verify the format strings vs the types of
the arguments.

Update the other prototype declarations in asm/xmon.h.

Silence warnings (triggered at W=1) by adding relevant __printf
attribute. Move #define at bottom of the file to prevent conflict with
gcc attribute.

Solves the original warning:

  arch/powerpc/xmon/nonstdio.c:178:2: error: function might be
  possible candidate for ‘gnu_printf’ format attribute

In turn this uncovered many formatting errors in xmon.c, all fixed in
this patch.

Signed-off-by: Mathieu Malaterre <malat@debian.org>
[mpe: Always use px not p, fixup the 44x specific code, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 12:04:36 +10:00
Michael Ellerman
6671683db8 powerpc/xmon: Specify the full format in DUMP() macro
In dump_one_paca() the DUMP macro unconditionally prepends '#' to the
printf format specifier. In most cases we're using either 'x' or 'lx'
etc. and that is OK. But for 'p' and other formats using '#' is
actually undefined, and once we enable printf() checking for
xmon_printf() we will get warnings from the compiler.

So just have each usage specify the full format, that way we can omit
'#' when it's inappropriate.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Mathieu Malaterre <malat@debian.org>
2018-05-25 12:04:35 +10:00
David S. Miller
d681bc027a mlx5-fixes-2018-05-24
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbBzJYAAoJEEg/ir3gV/o+QL8H/2vYqPAClpXyd2ZfQYY2XoeD
 cfu5XLflTS1jhQ6gfQxUNI+eXGoiX6P9cUpFEXiR53Fck3/1t1Jr1kG4SzysVGdB
 X+HARp3fHG1Rpm0J4aRB2hRONtG9GOyqUXwK+pgzdDu5fjhStxvHm/jlNH1NkZWA
 Y4gbgkqAv75Xrj2iEoGATrUFODttMmN3epsVgOytiovR7sbcCdI294kA97YwSb3C
 Id+GmWV027AcEgB3AVatScpOXo7WUh/gIssv1P2JBTWCY7Gsp+SaxaF0fecS7qAm
 +srklCYLQmvZ0sNtnq70bBnQbnj4AR3vSPY/iywx+KbvRV87sCW8iFPCbakJt7Q=
 =ueev
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-fixes-2018-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-05-24

This series includes two mlx5 fixes.

1) add FCS data to checksum complete when required, from Eran Ben
Elisha.

2) Fix A race in IPSec sandbox QP commands, from Yossi Kuperman.

Please pull and let me know if there's any problem.

for -stable v4.15
("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation")
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 22:01:06 -04:00
Willem de Bruijn
9aad13b087 packet: fix reserve calculation
Commit b84bbaf7a6 ("packet: in packet_snd start writing at link
layer allocation") ensures that packet_snd always starts writing
the link layer header in reserved headroom allocated for this
purpose.

This is needed because packets may be shorter than hard_header_len,
in which case the space up to hard_header_len may be zeroed. But
that necessary padding is not accounted for in skb->len.

The fix, however, is buggy. It calls skb_push, which grows skb->len
when moving skb->data back. But in this case packet length should not
change.

Instead, call skb_reserve, which moves both skb->data and skb->tail
back, without changing length.

Fixes: b84bbaf7a6 ("packet: in packet_snd start writing at link layer allocation")
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 21:55:20 -04:00
YueHaibing
d624613e42 cxgb4: Check for kvzalloc allocation failure
t4_prep_fw doesn't check for card_fw pointer before store the read data,
which could lead to a NULL pointer dereference if kvzalloc failed.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 21:52:44 -04:00
Alexei Starovoitov
10f678683e Merge branch 'xdp_xmit-bulking'
Jesper Dangaard Brouer says:

====================
This patchset change ndo_xdp_xmit API to take a bulk of xdp frames.

When kernel is compiled with CONFIG_RETPOLINE, every indirect function
pointer (branch) call hurts performance. For XDP this have a huge
negative performance impact.

This patchset reduce the needed (indirect) calls to ndo_xdp_xmit, but
also prepares for further optimizations.  The DMA APIs use of indirect
function pointer calls is the primary source the regression.  It is
left for a followup patchset, to use bulking calls towards the DMA API
(via the scatter-gatter calls).

The other advantage of this API change is that drivers can easier
amortize the cost of any sync/locking scheme, over the bulk of
packets.  The assumption of the current API is that the driver
implemementing the NDO will also allocate a dedicated XDP TX queue for
every CPU in the system.  Which is not always possible or practical to
configure. E.g. ixgbe cannot load an XDP program on a machine with
more than 96 CPUs, due to limited hardware TX queues.  E.g. virtio_net
is hard to configure as it requires manually increasing the
queues. E.g. tun driver chooses to use a per XDP frame producer lock
modulo smp_processor_id over avail queues.

I'm considered adding 'flags' to ndo_xdp_xmit, but it's not part of
this patchset.  This will be a followup patchset, once we know if this
will be needed (e.g. for non-map xdp_redirect flush-flag, and if
AF_XDP chooses to use ndo_xdp_xmit for TX).

---
V5: Fixed up issues spotted by Daniel and John

V4: Splitout the patches from 4 to 8 patches.  I cannot split the
driver changes from the NDO change, but I've tried to isolated the NDO
change together with the driver change as much as possible.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:16 -07:00
Jesper Dangaard Brouer
a570e48fee samples/bpf: xdp_monitor use err code from tracepoint xdp:xdp_devmap_xmit
Update xdp_monitor to use the recently added err code introduced
in tracepoint xdp:xdp_devmap_xmit, to show if the drop count is
caused by some driver general delivery problem.  Other kind of drops
will likely just be more normal TX space issues.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
e74de52e55 xdp/trace: extend tracepoint in devmap with an err
Extending tracepoint xdp:xdp_devmap_xmit in devmap with an err code
allow people to easier identify the reason behind the ndo_xdp_xmit
call to a given driver is failing.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
735fc4054b xdp: change ndo_xdp_xmit API to support bulking
This patch change the API for ndo_xdp_xmit to support bulking
xdp_frames.

When kernel is compiled with CONFIG_RETPOLINE, XDP sees a huge slowdown.
Most of the slowdown is caused by DMA API indirect function calls, but
also the net_device->ndo_xdp_xmit() call.

Benchmarked patch with CONFIG_RETPOLINE, using xdp_redirect_map with
single flow/core test (CPU E5-1650 v4 @ 3.60GHz), showed
performance improved:
 for driver ixgbe: 6,042,682 pps -> 6,853,768 pps = +811,086 pps
 for driver i40e : 6,187,169 pps -> 6,724,519 pps = +537,350 pps

With frames avail as a bulk inside the driver ndo_xdp_xmit call,
further optimizations are possible, like bulk DMA-mapping for TX.

Testing without CONFIG_RETPOLINE show the same performance for
physical NIC drivers.

The virtual NIC driver tun sees a huge performance boost, as it can
avoid doing per frame producer locking, but instead amortize the
locking cost over the bulk.

V2: Fix compile errors reported by kbuild test robot <lkp@intel.com>
V4: Isolated ndo, driver changes and callers.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
389ab7f01a xdp: introduce xdp_return_frame_rx_napi
When sending an xdp_frame through xdp_do_redirect call, then error
cases can happen where the xdp_frame needs to be dropped, and
returning an -errno code isn't sufficient/possible any-longer
(e.g. for cpumap case). This is already fully supported, by simply
calling xdp_return_frame.

This patch is an optimization, which provides xdp_return_frame_rx_napi,
which is a faster variant for these error cases.  It take advantage of
the protection provided by XDP RX running under NAPI protection.

This change is mostly relevant for drivers using the page_pool
allocator as it can take advantage of this. (Tested with mlx5).

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
9940fbf633 samples/bpf: xdp_monitor use tracepoint xdp:xdp_devmap_xmit
The xdp_monitor sample/tool is updated to use the new tracepoint
xdp:xdp_devmap_xmit the previous patch just introduced.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
38edddb811 xdp: add tracepoint for devmap like cpumap have
Notice how this allow us get XDP statistic without affecting the XDP
performance, as tracepoint is no-longer activated on a per packet basis.

V5: Spotted by John Fastabend.
 Fix 'sent' also counted 'drops' in this patch, a later patch corrected
 this, but it was a mistake in this intermediate step.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
5d053f9da4 bpf: devmap prepare xdp frames for bulking
Like cpumap create queue for xdp frames that will be bulked.  For now,
this patch simply invoke ndo_xdp_xmit foreach frame.  This happens,
either when the map flush operation is envoked, or when the limit
DEV_MAP_BULK_SIZE is reached.

V5: Avoid memleak on error path in dev_map_update_elem()

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:14 -07:00
Jesper Dangaard Brouer
67f29e07e1 bpf: devmap introduce dev_map_enqueue
Functionality is the same, but the ndo_xdp_xmit call is now
simply invoked from inside the devmap.c code.

V2: Fix compile issue reported by kbuild test robot <lkp@intel.com>

V5: Cleanups requested by Daniel
 - Newlines before func definition
 - Use BUILD_BUG_ON checks
 - Remove unnecessary use return value store in dev_map_enqueue

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:14 -07:00
Alexei Starovoitov
f80acbd233 Merge branch 'bpf-task-fd-query'
Yonghong Song says:

====================
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.

There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.

This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, this command will return bpf related information
to user space. Right now it only supports tracepoint/kprobe/uprobe
perf event fd's. For such a fd, BPF_TASK_FD_QUERY will return
   . prog_id
   . tracepoint name, or
   . k[ret]probe funcname + offset or kernel addr, or
   . u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.

Patch #1 adds function perf_get_event() in kernel/events/core.c.
Patch #2 implements the bpf subcommand BPF_TASK_FD_QUERY.
Patch #3 syncs tools bpf.h header and also add bpf_task_fd_query()
in the libbpf library for samples/selftests/bpftool to use.
Patch #4 adds ksym_get_addr() utility function.
Patch #5 add a test in samples/bpf for querying k[ret]probes and
u[ret]probes.
Patch #6 add a test in tools/testing/selftests/bpf for querying
raw_tracepoint and tracepoint.
Patch #7 add a new subcommand "perf" to bpftool.

Changelogs:
  v4 -> v5:
     . return strlen(buf) instead of strlen(buf) + 1
       in the attr.buf_len. As long as user provides
       non-empty buffer, it will be filed with empty
       string, truncated string, or full string
       based on the buffer size and the length of
       to-be-copied string.
  v3 -> v4:
     . made attr buf_len input/output. The length of
       actual buffter is written to buf_len so user space knows
       what is actually needed. If user provides a buffer
       with length >= 1 but less than required, do partial
       copy and return -ENOSPC.
     . code simplification with put_user.
     . changed query result attach_info to fd_type.
     . add tests at selftests/bpf to test zero len, null buf and
       insufficient buf.
  v2 -> v3:
     . made perf_get_event() return perf_event pointer const.
       this was to ensure that event fields are not meddled.
     . detect whether newly BPF_TASK_FD_QUERY is supported or
       not in "bpftool perf" and warn users if it is not.
  v1 -> v2:
     . changed bpf subcommand name from BPF_PERF_EVENT_QUERY
       to BPF_TASK_FD_QUERY.
     . fixed various "bpftool perf" issues and added documentation
       and auto-completion.
====================

Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:21 -07:00
Yonghong Song
b04df400c3 tools/bpftool: add perf subcommand
The new command "bpftool perf [show | list]" will traverse
all processes under /proc, and if any fd is associated
with a perf event, it will print out related perf event
information. Documentation is also added.

Below is an example to show the results using bcc commands.
Running the following 4 bcc commands:
  kprobe:     trace.py '__x64_sys_nanosleep'
  kretprobe:  trace.py 'r::__x64_sys_nanosleep'
  tracepoint: trace.py 't:syscalls:sys_enter_nanosleep'
  uprobe:     trace.py 'p:/home/yhs/a.out:main'

The bpftool command line and result:

  $ bpftool perf
  pid 21711  fd 5: prog_id 5  kprobe  func __x64_sys_write  offset 0
  pid 21765  fd 5: prog_id 7  kretprobe  func __x64_sys_nanosleep  offset 0
  pid 21767  fd 5: prog_id 8  tracepoint  sys_enter_nanosleep
  pid 21800  fd 5: prog_id 9  uprobe  filename /home/yhs/a.out  offset 1159

  $ bpftool -j perf
  [{"pid":21711,"fd":5,"prog_id":5,"fd_type":"kprobe","func":"__x64_sys_write","offset":0}, \
   {"pid":21765,"fd":5,"prog_id":7,"fd_type":"kretprobe","func":"__x64_sys_nanosleep","offset":0}, \
   {"pid":21767,"fd":5,"prog_id":8,"fd_type":"tracepoint","tracepoint":"sys_enter_nanosleep"}, \
   {"pid":21800,"fd":5,"prog_id":9,"fd_type":"uprobe","filename":"/home/yhs/a.out","offset":1159}]

  $ bpftool prog
  5: kprobe  name probe___x64_sys  tag e495a0c82f2c7a8d  gpl
	  loaded_at 2018-05-15T04:46:37-0700  uid 0
	  xlated 200B  not jited  memlock 4096B  map_ids 4
  7: kprobe  name probe___x64_sys  tag f2fdee479a503abf  gpl
	  loaded_at 2018-05-15T04:48:32-0700  uid 0
	  xlated 200B  not jited  memlock 4096B  map_ids 7
  8: tracepoint  name tracepoint__sys  tag 5390badef2395fcf  gpl
	  loaded_at 2018-05-15T04:48:48-0700  uid 0
	  xlated 200B  not jited  memlock 4096B  map_ids 8
  9: kprobe  name probe_main_1  tag 0a87bdc2e2953b6d  gpl
	  loaded_at 2018-05-15T04:49:52-0700  uid 0
	  xlated 200B  not jited  memlock 4096B  map_ids 9

  $ ps ax | grep "python ./trace.py"
  21711 pts/0    T      0:03 python ./trace.py __x64_sys_write
  21765 pts/0    S+     0:00 python ./trace.py r::__x64_sys_nanosleep
  21767 pts/2    S+     0:00 python ./trace.py t:syscalls:sys_enter_nanosleep
  21800 pts/3    S+     0:00 python ./trace.py p:/home/yhs/a.out:main
  22374 pts/1    S+     0:00 grep --color=auto python ./trace.py

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:20 -07:00
Yonghong Song
f699cf7aa4 tools/bpf: add two BPF_TASK_FD_QUERY tests in test_progs
The new tests are added to query perf_event information
for raw_tracepoint and tracepoint attachment. For tracepoint,
both syscalls and non-syscalls tracepoints are queries as
they are treated slightly differently inside the kernel.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:20 -07:00
Yonghong Song
ecb96f7fe1 samples/bpf: add a samples/bpf test for BPF_TASK_FD_QUERY
This is mostly to test kprobe/uprobe which needs kernel headers.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:20 -07:00
Yonghong Song
73bc4d9fc0 tools/bpf: add ksym_get_addr() in trace_helpers
Given a kernel function name, ksym_get_addr() will return the kernel
address for this function, or 0 if it cannot find this function name
in /proc/kallsyms. This function will be used later when a kernel
address is used to initiate a kprobe perf event.

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:20 -07:00
Yonghong Song
30687ad94e tools/bpf: sync kernel header bpf.h and add bpf_task_fd_query in libbpf
Sync kernel header bpf.h to tools/include/uapi/linux/bpf.h and
implement bpf_task_fd_query() in libbpf. The test programs
in samples/bpf and tools/testing/selftests/bpf, and later bpftool
will use this libbpf function to query kernel.

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:19 -07:00
Yonghong Song
41bdc4b40e bpf: introduce bpf subcommand BPF_TASK_FD_QUERY
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.

There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.

This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, if the <pid, fd> is associated with a
tracepoint/kprobe/uprobe perf event, BPF_TASK_FD_QUERY will return
   . prog_id
   . tracepoint name, or
   . k[ret]probe funcname + offset or kernel addr, or
   . u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:19 -07:00
Yonghong Song
f8d959a5b1 perf/core: add perf_get_event() to return perf_event given a struct file
A new extern function, perf_get_event(), is added to return a perf event
given a struct file. This function will be used in later patches.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:19 -07:00
Dave Airlie
dd41fb8547 Merge branch 'drm-next-4.18' of git://people.freedesktop.org/~agd5f/linux into drm-next
Last feature request for 4.18.  Mostly vega20 support.
- Vega20 support
- clock and powergating for VCN
- misc bug fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180524152427.32713-1-alexander.deucher@amd.com
2018-05-25 10:28:33 +10:00
Dave Airlie
4bc6f77795 Merge branch 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux into drm-fixes
Three fixes for vmwgfx. Two are cc'd stable and fix host logging and its
error paths on 32-bit VMs. One is a fix for a hibernate flaw
introduced with the 4.17 merge window.

* 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Schedule an fb dirty update after resume
  drm/vmwgfx: Fix host logging / guestinfo reading error paths
  drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
2018-05-25 09:47:56 +10:00
Linus Torvalds
b50694381c Merge branch 'stable/for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
 "One single fix in here: under Xen the DMA32 heap (in the hypervisor)
  would end up looking like swiss cheese.

  The reason being that for every coherent DMA allocation we didn't do
  the proper hypercall to tell Xen to return the page back to the DMA32
  heap. End result was (eventually) no DMA32 space if you (for example)
  continously unloaded and loaded modules"

* 'stable/for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
2018-05-24 14:42:43 -07:00
Wei Hu(Xavier)
d59fcacc4b RDMA/hns: Increase checking CMQ status timeout value
This patch increases checking CMQ status timeout value and
uses the same value with NIC driver to avoid deficiency of
time.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24 15:41:52 -06:00
Wei Hu(Xavier)
5b6eb54f58 RDMA/hns: Modify uar allocation algorithm to avoid bitmap exhaust
This patch modified uar allocation algorithm in hns_roce_uar_alloc
function to avoid bitmap exhaust.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24 15:41:52 -06:00
Yossi Kuperman
1dcbc01f73 net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
Sandbox QP Commands are retired in the order they are sent. Outstanding
commands are stored in a linked-list in the order they appear. Once a
response is received and the callback gets called, we pull the first
element off the pending list, assuming they correspond.

Sending a message and adding it to the pending list is not done atomically,
hence there is an opportunity for a race between concurrent requests.

Bind both send and add under a critical section.

Fixes: bebb23e6cb ("net/mlx5: Accel, Add IPSec acceleration interface")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24 14:40:40 -07:00
Eran Ben Elisha
902a545904 net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
When RXFCS feature is enabled, the HW do not strip the FCS data,
however it is not present in the checksum calculated by the HW.

Fix that by manually calculating the FCS checksum and adding it to the SKB
checksum field.

Add helper function to find the FCS data for all SKB forms (linear,
one fragment or more).

Fixes: 102722fc68 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24 14:40:39 -07:00
Huy Nguyen
ecdf2dadee net/mlx5e: Receive buffer support for DCBX
Add dcbnl's set/get buffer configuration callback that allows user to
set/get buffer size configuration and priority to buffer mapping.

By default, firmware controls receive buffer configuration and priority
of buffer mapping based on the changes in pfc settings. When set buffer
call back is triggered, the buffer configuration changes to manual mode.

The manual mode means mlx5 driver will adjust the buffer configuration
accordingly based on the changes in pfc settings.

ConnectX buffer stride is 128 Bytes. If the buffer size is not multiple
of 128, the buffer size will be rounded down to the nearest multiple of
128.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24 14:23:33 -07:00
Huy Nguyen
0696d60853 net/mlx5e: Receive buffer configuration
Add APIs for buffer configuration based on the changes in
pfc configuration, cable len, buffer size configuration,
and priority to buffer mapping.

Note that the xoff fomula is as below
  xoff = ((301+2.16 * len [m]) * speed [Gbps] + 2.72 MTU [B]
  xoff_threshold = buffer_size - xoff
  xon_threshold = xoff_threshold - MTU

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24 14:23:33 -07:00
Huy Nguyen
50b4a3c236 net/mlx5: PPTB and PBMC register firmware command support
Add firmware command interface to read and write PPTB and PBMC
registers.

PPTB register enables mappings priority to a specific receive buffer.

PBMC registers enables changing the receive buffer's configuration such
as buffer size, xon/xoff thresholds, buffer's lossy property and
buffer's shared property.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24 14:23:33 -07:00
Huy Nguyen
df5f1361cc net/mlx5: Add pbmc and pptb in the port_access_reg_cap_mask
Add pbmc and pptb in the port_access_reg_cap_mask. These two
bits determine if device supports receive buffer configuration.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24 14:23:33 -07:00
Huy Nguyen
2c81bfd5ae net/mlx5e: Move port speed code from en_ethtool.c to en/port.c
Move four below functions from en_ethtool.c to en/port.c. These
functions are used by both en_ethtool.c and en_main.c. Future code
can use these functions without ethtool link mode dependency.
  u32 mlx5e_port_ptys2speed(u32 eth_proto_oper);
  int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
  int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
  u32 mlx5e_port_speed2linkmodes(u32 speed);

Delete the speed field from table mlx5e_build_ptys2ethtool_map. This
table only keeps the mapping between the mlx5e link mode and
ethtool link mode. Add new table mlx5e_link_speed for translation
from mlx5e link mode to actual speed.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24 14:23:33 -07:00
Huy Nguyen
e549f6f9c0 net/dcb: Add dcbnl buffer attribute
In this patch, we add dcbnl buffer attribute to allow user
change the NIC's buffer configuration such as priority
to buffer mapping and buffer size of individual buffer.

This attribute combined with pfc attribute allows advanced user to
fine tune the qos setting for specific priority queue. For example,
user can give dedicated buffer for one or more priorities or user
can give large buffer to certain priorities.

The dcb buffer configuration will be controlled by lldptool.
lldptool -T -i eth2 -V BUFFER prio 0,2,5,7,1,2,3,6
  maps priorities 0,1,2,3,4,5,6,7 to receive buffer 0,2,5,7,1,2,3,6
lldptool -T -i eth2 -V BUFFER size 87296,87296,0,87296,0,0,0,0
  sets receive buffer size for buffer 0,1,2,3,4,5,6,7 respectively

After discussion on mailing list with Jakub, Jiri, Ido and John, we agreed to
choose dcbnl over devlink interface since this feature is intended to set
port attributes which are governed by the netdev instance of that port, where
devlink API is more suitable for global ASIC configurations.

We present an use case scenario where dcbnl buffer attribute configured
by advance user helps reduce the latency of messages of different sizes.

Scenarios description:
On ConnectX-5, we run latency sensitive traffic with
small/medium message sizes ranging from 64B to 256KB and bandwidth sensitive
traffic with large messages sizes 512KB and 1MB. We group small, medium,
and large message sizes to their own pfc enables priorities as follow.
  Priorities 1 & 2 (64B, 256B and 1KB)
  Priorities 3 & 4 (4KB, 8KB, 16KB, 64KB, 128KB and 256KB)
  Priorities 5 & 6 (512KB and 1MB)

By default, ConnectX-5 maps all pfc enabled priorities to a single
lossless fixed buffer size of 50% of total available buffer space. The
other 50% is assigned to lossy buffer. Using dcbnl buffer attribute,
we create three equal size lossless buffers. Each buffer has 25% of total
available buffer space. Thus, the lossy buffer size reduces to 25%. Priority
to lossless  buffer mappings are set as follow.
  Priorities 1 & 2 on lossless buffer #1
  Priorities 3 & 4 on lossless buffer #2
  Priorities 5 & 6 on lossless buffer #3

We observe improvements in latency for small and medium message sizes
as follows. Please note that the large message sizes bandwidth performance is
reduced but the total bandwidth remains the same.
  256B message size (42 % latency reduction)
  4K message size (21% latency reduction)
  64K message size (16% latency reduction)

CC: Ido Schimmel <idosch@idosch.org>
CC: Jakub Kicinski <jakub.kicinski@netronome.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Or Gerlitz <gerlitz.or@gmail.com>
CC: Parav Pandit <parav@mellanox.com>
CC: Aron Silverton <aron.silverton@oracle.com>
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-24 14:22:59 -07:00
Linus Torvalds
34b48b8789 Merge candidates for 4.17-rc
- Remove bouncing addresses from the MAINTAINERS file
 - Kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers
 - Various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers
 - Two fixes for patches already sent during the merge window
 - A long standing bug related to not decreasing the pinned pages count in the right
   MM was found and fixed
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCgAGBQJbByPQAAoJEDht9xV+IJsa164P/AihB/vbn9MBdK3pe1OSUGTm
 tKZJ/Y6nY/Q/XTJSeM2wNECk8fOrZbKuLBz2XlPRsB2djp4ugC5WWfK9YbwWMGXG
 I5B/lB8VTorQr8E5i9lqqMDQc8aF8VcGJtdqVE3nD4JsVTrQSGiSnw45/BARDUm3
 OycJJMDOWhDj2wnNSa+JfjPemIMDM1jse7DnsJfDsGfTMS/G+6nyzjKIlEnnFZ8/
 PBxhq0q7C5viNDwwn2GsAVUrATTlW48SY0WYhkgMdSl20d2th9wMZqNMqtniz8NP
 lg87SrhzsAPOTlbSWlYYkAnzE7nEhfJyIfYUp2piNJeYuOohYPtO6w99Tqjl/GmU
 uLIYIXtZCxAK1Zb/znc49HkRVL5YFDsQGXdtYy7tvRZPwwR32kowUtpKIWaZFz8O
 BA/x+Zgqu9AlwqSWwQwxmMbUX42RRwhNJDVyTYlXQSSzhfgFaLIZARqb4K6HxeNN
 vZN0BK+x6pX6FI7hpdsqNRtH1oo4SNUBxiuUsrZ7cy7GqYNdUJ6piygDgmERaJxU
 svIUJof/+OoU1QyErQ0JgUEK/3jOHbjxSPb/rjQeqxAnCqhaGOuNGMtdfsGqgvBU
 x/u3eDcbfi/LBErXR46gYtxnOQ8I2BB+m8erUc/GVvCzWrX+R7ELZYpBrP5Pcu/6
 mr2D7hDqgZHbeU8aB8+D
 =uFZh
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "This is pretty much just the usual array of smallish driver bugs.

   - remove bouncing addresses from the MAINTAINERS file

   - kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and
     hns drivers

   - various small LOC behavioral/operational bugs in mlx5, hns, qedr
     and i40iw drivers

   - two fixes for patches already sent during the merge window

   - a long-standing bug related to not decreasing the pinned pages
     count in the right MM was found and fixed"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
  RDMA/hns: Move the location for initializing tmp_len
  RDMA/hns: Bugfix for cq record db for kernel
  IB/uverbs: Fix uverbs_attr_get_obj
  RDMA/qedr: Fix doorbell bar mapping for dpi > 1
  IB/umem: Use the correct mm during ib_umem_release
  iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()'
  RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint
  RDMA/i40iw: Avoid reference leaks when processing the AEQ
  RDMA/i40iw: Avoid panic when objects are being created and destroyed
  RDMA/hns: Fix the bug with NULL pointer
  RDMA/hns: Set NULL for __internal_mr
  RDMA/hns: Enable inner_pa_vld filed of mpt
  RDMA/hns: Set desc_dma_addr for zero when free cmq desc
  RDMA/hns: Fix the bug with rq sge
  RDMA/hns: Not support qp transition from reset to reset for hip06
  RDMA/hns: Add return operation when configured global param fail
  RDMA/hns: Update convert function of endian format
  RDMA/hns: Load the RoCE dirver automatically
  RDMA/hns: Bugfix for rq record db for kernel
  RDMA/hns: Add rq inline flags judgement
  ...
2018-05-24 14:12:05 -07:00