Commit graph

766,493 commits

Author SHA1 Message Date
Fabio Estevam
acd70ba435
regulator: mc13783: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-24 15:17:11 +01:00
Fabio Estevam
c07bbfe702
regulator: anatop: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-24 15:17:07 +01:00
Fabio Estevam
809858cd44
regulator: pfuze100: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-24 15:17:03 +01:00
Geert Uytterhoeven
0921e11e1e
spi: sh-msiof: Fix setting SIRMDR1.SYNCAC to match SITMDR1.SYNCAC
According to section 59.2.4 MSIOF Receive Mode Register 1 (SIRMDR1) in
the R-Car Gen3 datasheet Rev.1.00, the value of the SIRMDR1.SYNCAC bit
must match the value of the SITMDR1.SYNCAC bit.  However,
sh_msiof_spi_setup() changes only the latter.

Fix this by updating the SIRMDR1 register like the SITMDR1 register,
taking into account register bits that exist in SITMDR1 only.

Reported-by: Renesas BSP team via Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 7ff0b53c40 ("spi: sh-msiof: Avoid writing to registers from spi_master.setup()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-24 15:15:39 +01:00
Michal Suchanek
7daf593009 powerpc/xmon: Also setup debugger hooks when single-stepping
When single-stepping kernel code from xmon without a debug hook
enabled the kernel crashes. This can happen when kernel starts with
xmon on crash disabled but xmon is entered using sysrq.

Call force_enable_xmon when single-stepping in xmon to install the
xmon debug hooks.

Fixes: e1368d0c9e ("powerpc/xmon: Setup debugger hooks when first break-point is set")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 00:08:26 +10:00
Christophe Leroy
e4ccb1dae6 powerpc/8xx: fix invalid register expression in head_8xx.S
New binutils generate the following warning

  AS      arch/powerpc/kernel/head_8xx.o
arch/powerpc/kernel/head_8xx.S: Assembler messages:
arch/powerpc/kernel/head_8xx.S:916: Warning: invalid register expression

This patch fixes it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 00:08:26 +10:00
Michael Neuling
9c2ddfe55c selftests/powerpc: Add ptrace hw breakpoint test
This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and
PPC_PTRACE_SETHWDEBUG.  This test was use to find the bugs fixed by
these recent commits:

  4f7c06e26e powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG
  cd6ef7eebf powerpc/ptrace: Fix enforcement of DAWR constraints

Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Add SPDX tag, clang format it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 00:08:25 +10:00
Michael Neuling
bd79010fb3 selftests/powerpc: Add missing .gitignores
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 00:08:25 +10:00
Christophe Leroy
0e36b0d125 powerpc/mm: Only read faulting instruction when necessary in do_page_fault()
Commit a7a9dcd882 ("powerpc: Avoid taking a data miss on every
userspace instruction miss") has shown that limiting the read of
faulting instruction to likely cases improves performance.

This patch goes further into this direction by limiting the read
of the faulting instruction to the only cases where it is likely
needed.

On an MPC885, with the same benchmark app as in the commit referred
above, we see a reduction of about 3900 dTLB misses (approx 3%):

Before the patch:
 Performance counter stats for './fault 500' (10 runs):

         683033312      cpu-cycles                                                    ( +-  0.03% )
            134538      dTLB-load-misses                                              ( +-  0.03% )
             46099      iTLB-load-misses                                              ( +-  0.02% )
             19681      faults                                                        ( +-  0.02% )

       5.389747878 seconds time elapsed                                          ( +-  0.06% )

With the patch:

 Performance counter stats for './fault 500' (10 runs):

         682112862      cpu-cycles                                                    ( +-  0.03% )
            130619      dTLB-load-misses                                              ( +-  0.03% )
             46073      iTLB-load-misses                                              ( +-  0.05% )
             19681      faults                                                        ( +-  0.01% )

       5.381342641 seconds time elapsed                                          ( +-  0.07% )

The proper work of the huge stack expansion was tested with the
following app:

int main(int argc, char **argv)
{
	char buf[1024 * 1025];

	sprintf(buf, "Hello world !\n");
	printf(buf);

	exit(0);
}

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add include of pagemap.h to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 00:08:25 +10:00
Christophe Leroy
8a0b1120cb powerpc/mm: Use instruction symbolic names in store_updates_sp()
Use symbolic names defined in asm/ppc-opcode.h
instead of hardcoded values.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25 00:08:24 +10:00
Mika Westerberg
4544e403eb ahci: Add PCI ID for Cannon Lake PCH-LP AHCI
This one should be using the default LPM policy for mobile chipsets so
add the PCI ID to the driver list of supported revices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2018-05-24 07:03:32 -07:00
Dhinakaran Pandiyan
bdcc02cf1b drm/psr: Fix missed entry in PSR setup time table.
Entry corresponding to 220 us setup time was missing. I am not aware of
any specific bug this fixes, but this could potentially result in enabling
PSR on a panel with a higher setup time requirement than supported by the
hardware.

I verified the value is present in eDP spec versions 1.3, 1.4 and 1.4a.

Fixes: 6608804b3d ("drm/dp: Add drm_dp_psr_setup_time()")
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-3-dhinakaran.pandiyan@intel.com
2018-05-24 16:44:17 +03:00
Petr Mladek
a48c7709fe livepatch: Remove not longer valid limitations from the documentation
Semantic changes are possible since the commit d83a7cb375
("livepatch: change to a per-task consistency model").

Also data structures can be patched since the commit 439e7271dc
("livepatch: introduce shadow variable API").

It is a high time we removed these limitations from the documentation.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-05-24 15:37:57 +02:00
Jakub Kicinski
13405468f4 bpfilter: don't pass O_CREAT when opening console for debug
Passing O_CREAT (00000100) to open means we should also pass file
mode as the third parameter.  Creating /dev/console as a regular
file may not be helpful anyway, so simply drop the flag when
opening debug_fd.

Fixes: d2ba09c17a ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 09:36:49 -04:00
Alexei Starovoitov
61a552eb48 bpfilter: fix build dependency
BPFILTER could have been enabled without INET causing this build error:
ERROR: "bpfilter_process_sockopt" [net/bpfilter/bpfilter.ko] undefined!

Fixes: d2ba09c17a ("net: add skeleton of bpfilter kernel module")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 09:33:28 -04:00
Maciej W. Rozycki
c7e814628d
MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs
Use 64-bit accesses for 64-bit floating-point general registers with
PTRACE_PEEKUSR, removing the truncation of their upper halves in the
FR=1 mode, caused by commit bbd426f542 ("MIPS: Simplify FP context
access"), which inadvertently switched them to using 32-bit accesses.

The PTRACE_POKEUSR side is fine as it's never been broken and continues
using 64-bit accesses.

Fixes: bbd426f542 ("MIPS: Simplify FP context access")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/19334/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-05-24 14:03:14 +01:00
Stephen Hemminger
5b8db8f66e PCI: hv: Use list_for_each_entry()
There are several places where list_for_each_entry() could be
used to simplify the code.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-24 14:02:15 +01:00
Stephen Hemminger
6708be9367 PCI: hv: Convert remove_lock to refcount
Use refcount instead of atomic for the reference counting
on bus. Refcount is safer because it handles overflow correctly.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
[lorenzo.pieralisi@arm.com: updated commit subject]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-24 13:58:39 +01:00
Stephen Hemminger
8c99e120ff PCI: hv: Remove unused reason for refcount handler
The get/put functions were taking a reason code. This appears to be
a debug infrastructure that is no longer used.

Move the functions to start of file to eliminate need for
forward declaration. Forward declarations are discouraged on
Linux.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
[lorenzo.pieralisi@arm.com: updated commit subject]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-24 13:57:55 +01:00
Maciej W. Rozycki
28e4213dd3
MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e.
Status.FR) is not supported as the lone purpose of Config5.FRE is to
emulate Status.FR=0 handling on FPU hardware that has Status.FR=1
hardwired[1][2].  Also we do not handle this case elsewhere, and assume
throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot
be set both at once for a task, leading to inconsistent behaviour if
this does happen.

Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting
PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear.  This corresponds to
modes allowed by `mips_set_personality_fp'.

References:

[1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32
    Privileged Resource Architecture", Imagination Technologies,
    Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69
    "Config5 Register Field Descriptions", p. 262

[2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
    Privileged Resource Architecture", Imagination Technologies,
    Document Number: MD00091, Revision 6.03, December 22, 2015, Table
    9.72 "Config5 Register Field Descriptions", p. 288

Fixes: 9791554b45 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/19327/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-05-24 13:45:13 +01:00
Maciej W. Rozycki
d1157b1074
MIPS: ptrace: Make FPU context layout comments match reality
Correct comments across ptrace(2) handlers about an FPU register context
layout discrepancy between MIPS I and later ISAs, which was fixed with
`linux-mips.org' (LMO) commit 42533948caac ("Major pile of FP emulator
changes."), the fix corrected with LMO commit 849fa7a50dff ("R3k FPU
ptrace() handling fixes."), and then broken and fixed over and over
again, until last time fixed with commit 80cbfad790 ("MIPS: Correct
MIPS I FP context layout").

NB running the GDB test suite for the relevant ABI/ISA and watching out
for regressions is advisable when poking around ptrace(2).

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19326/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-05-24 13:37:07 +01:00
Linus Walleij
b11a0b3e72 gpio: palmas: Include the right header
This is a GPIO driver, include only <linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24 14:25:13 +02:00
Linus Walleij
b7351b077e gpio: omap: Include the right header
This is a GPIO driver, include only <linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24 14:24:00 +02:00
Mathias Kresin
32795631e6
MIPS: lantiq: gphy: Drop reboot/remove reset asserts
While doing a global software reset, these bits are not cleared and let
some bootloader fail to initialise the GPHYs. The bootloader don't
expect the GPHYs in reset, as they aren't during power on.

The asserts were a workaround for a wrong syscon-reboot mask. With a
mask set which includes the GPHY resets, these resets aren't required
any more.

Fixes: 126534141b ("MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfd")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/19003/
[jhogan@kernel.org: Fix build warnings]
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-05-24 13:22:56 +01:00
Linus Walleij
be1f20a41f gpio: octeon: Include the right header
This is a GPIO driver, include only <linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24 14:22:04 +02:00
Julia Lawall
b10d7a1fd6 i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data
Drop call to of_match_device, which is subsumed by the subsequent
call to of_device_get_match_data.  The code becomes simpler, and a
temporary variable can be dropped.

The semantic match that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
local idexpression match;
identifier i;
expression x, dev, e, e1;
@@
-        match@i = of_match_device(x, dev);
-        if (match) e = of_device_get_match_data(dev);
-        else e = e1;
+        e = of_device_get_match_data(dev);
+        if (!e) e = e1;

@@
identifier r.i;
@@
- const struct of_device_id *i;
... when != i
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24 13:51:25 +02:00
Wolfram Sang
5a9dcd8190 i2c: mux: demux-pinctrl: use proper parent device for demux adapter
Due to a typo, the wrong parent device was assigned to the newly created
demuxing adapter device. It got connected to the demuxing platform
device but not to the selected parent I2C adapter device. Fix it to get
a proper parent-child relationship of the demuxed busses.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24 13:45:04 +02:00
Fabio Estevam
339e7730cb gpio: mxs: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24 13:43:56 +02:00
Wolfram Sang
f657c9fe26 i2c: mux: improve error message for failed symlink
Trivial, but still: the failed symlink is not *for* the channel but a
link *to* the channel.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24 13:42:40 +02:00
Ludovic Barre
6a88c221ac ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
This patch adds support of external interrupt for
gpio[a..k], gpioz

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:23 +01:00
Ludovic Barre
5f0e9d2557 ARM: dts: stm32: Add exti support for stm32mp157c
This patch adds external interrupt (exti) support
on stm32mp157c SoC.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:23 +01:00
Ludovic Barre
c12fcfb12e pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
-Parent domain of stm32gpio evolves to hierarchy domain
 and could have a handle_fasteoi_irq. So an irq_eoi parent callback
 is needed for children.
-Replace space by tabulation.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:22 +01:00
Ludovic Barre
73958b31c1 irqchip/stm32: Add suspend/resume support for hierarchy domain
This patch adds suspend/resume feature for exti hierarchy domain.
-suspend function sets wake_active into imr of each banks
-resume function restores the mask_cache interrupt into
 imr of each banks

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:22 +01:00
Ludovic Barre
927abfc446 irqchip/stm32: Add stm32mp1 support with hierarchy domain
Exti controller has been differently integrated on stm32mp1 SoC.
A parent irq has only one external interrupt. A hierachy domain could
be used. Handlers are call by parent, each parent interrupt could be
masked and unmasked according to the needs.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:22 +01:00
Ludovic Barre
5a2490e029 irqchip/stm32: Prepare common functions
This patch prepares functions which could be reused by
next variant of stm32 exti controller.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:21 +01:00
Ludovic Barre
f9fc174550 irqchip/stm32: Add host and driver data structures
This patch adds host and driver data structures to support
different stm32 exti controllers with variants.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:21 +01:00
Ludovic Barre
d9e2b19b02 irqchip/stm32: Add suspend support
This patch adds suspend feature.
-Use default irq_set_wake function to store wakeup request.
-Suspend function set wake_active into imr of each bank
 and save rising/falling trigger registers.
-Resume function restore the mask_cache interrupt into
 imr of each bank and restore rising/falling trigger registers.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:20 +01:00
Ludovic Barre
be6230f0c2 irqchip/stm32: Add falling pending register support
This patch adds support of rising/falling pending registers.
Falling pending register (fpr) is needed for next revision.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:20 +01:00
Ludovic Barre
ea80aa2a1a irqchip/stm32: Checkpatch fix
-WARNING: struct irq_domain_ops should normally be const
-CHECK: Alignment should match open parenthesis

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:38:20 +01:00
Radoslaw Pietrzyk
ff78716d43 irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
- In stm32_exti_alloc function, discards irq_domain_set_info
  with handle_simple_irq. This overwrite the setting defined while init
  of generic chips. Exti controller manages edge irq type.
- Removes acking in chained irq handler as this is done by
  irq_chip itself inside handle_edge_irq
- removes unneeded irq_domain_ops.xlate callback

Acked-by: Ludovic Barre <ludovic.barre@st.com>
Tested-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietrzyk@gmail.com>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:37:54 +01:00
Yixun Lan
868c4e0753 irqchip/meson-gpio: Add support for Meson-AXG SoCs
The Meson-AXG SoC uses the same GPIO interrupt controller IP block as the other
Meson SoCs. A total of 100 pins can be spied on, which is the sum of:
- 255:100 Undefined(no interrupt)
- 99:84, 16 pins on bank GPIOY
- 83:61, 23 pins on bank GPIOX
- 60:40, 21 pins on bank GPIOA
- 39:25, 15 pins on bank BOOT
- 24:14, 11 pins on bank GPIOZ
- 13:0 , 14 pins in the AO domain

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:34:18 +01:00
Yixun Lan
3212dca4f1 dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
Update the dt-binding documentation to support new compatible string
for the GPIO interrupt controller which found in Amlogic's Meson-AXG SoC.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:34:00 +01:00
Yixun Lan
0e41635b7a dt-bindings: interrupt-controller: Fix the double quotes
The double quotes seems not ASCII type, fix it here.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24 12:32:40 +01:00
Markus Elfring
b30c08a24c i2c: mux: reg: failed memory allocation is logged elsewhere
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24 13:14:21 +02:00
Laura Abbott
82034c23fc arm64: Make sure permission updates happen for pmd/pud
Commit 15122ee2c5 ("arm64: Enforce BBM for huge IO/VMAP mappings")
disallowed block mappings for ioremap since that code does not honor
break-before-make. The same APIs are also used for permission updating
though and the extra checks prevent the permission updates from happening,
even though this should be permitted. This results in read-only permissions
not being fully applied. Visibly, this can occasionaly be seen as a failure
on the built in rodata test when the test data ends up in a section or
as an odd RW gap on the page table dump. Fix this by using
pgattr_change_is_safe instead of p*d_present for determining if the
change is permitted.

Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: 15122ee2c5 ("arm64: Enforce BBM for huge IO/VMAP mappings")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-24 11:19:31 +01:00
Michael Schmitz
3f90f9ef2d m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()
If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap
between mappings which is added to the vm_struct representing the
mapping.  __ioremap() uses the actual requested size (after alignment),
while __iounmap() is passed the size from the vm_struct.

On 020/030, early termination descriptors are used to set up mappings of
extent 'size', which are validated on unmapping. The unmapped gap of
size IO_SIZE defeats the sanity check of the pmd tables, causing
__iounmap() to loop forever on 030.

On 040/060, unmapping of page table entries does not check for a valid
mapping, so the umapping loop always completes there.

Adjust size to be unmapped by the gap that had been added in the
vm_struct prior.

This fixes the hang in atari_platform_init() reported a long time ago,
and a similar one reported by Finn recently (addressed by removing
ioremap() use from the SWIM driver.

Tested on my Falcon in 030 mode - untested but should work the same on
040/060 (the extra page tables cleared there would never have been set
up anyway).

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
[geert: Minor commit description improvements]
[geert: This was fixed in 2.4.23, but not in 2.5.x]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2018-05-24 12:00:27 +02:00
Daniel Borkmann
31ad39239f Merge branch 'bpf-ipv6-seg6-bpf-action'
Mathieu Xhonneux says:

====================
As of Linux 4.14, it is possible to define advanced local processing for
IPv6 packets with a Segment Routing Header through the seg6local LWT
infrastructure. This LWT implements the network programming principles
defined in the IETF "SRv6 Network Programming" draft.

The implemented operations are generic, and it would be very interesting to
be able to implement user-specific seg6local actions, without having to
modify the kernel directly. To do so, this patchset adds an End.BPF action
to seg6local, powered by some specific Segment Routing-related helpers,
which provide SR functionalities that can be applied on the packet. This
BPF hook would then allow to implement specific actions at native kernel
speed such as OAM features, advanced SR SDN policies, SRv6 actions like
Segment Routing Header (SRH) encapsulation depending on the content of
the packet, etc.

This patchset is divided in 6 patches, whose main features are :

- A new seg6local action End.BPF with the corresponding new BPF program
  type BPF_PROG_TYPE_LWT_SEG6LOCAL. Such attached BPF program can be
  passed to the LWT seg6local through netlink, the same way as the LWT
  BPF hook operates.
- 3 new BPF helpers for the seg6local BPF hook, allowing to edit/grow/
  shrink a SRH and apply on a packet some of the generic SRv6 actions.
- 1 new BPF helper for the LWT BPF IN hook, allowing to add a SRH through
  encapsulation (via IPv6 encapsulation or inlining if the packet contains
  already an IPv6 header).

As this patchset adds a new LWT BPF hook, I took into account the result
of the discussions when the LWT BPF infrastructure got merged. Hence, the
seg6local BPF hook doesn't allow write access to skb->data directly, only
the SRH can be modified through specific helpers, which ensures that the
integrity of the packet is maintained. More details are available in the
related patches messages.

The performances of this BPF hook have been assessed with the BPF JIT
enabled on an Intel Xeon X3440 processors with 4 cores and 8 threads
clocked at 2.53 GHz. No throughput losses are noted with the seg6local
BPF hook when the BPF program does nothing (440kpps). Adding a 8-bytes
TLV (1 call each to bpf_lwt_seg6_adjust_srh and bpf_lwt_seg6_store_bytes)
drops the throughput to 410kpps, and inlining a SRH via bpf_lwt_seg6_action
drops the throughput to 420kpps. All throughputs are stable.

Changelog:

v2: move the SRH integrity state from skb->cb to a per-cpu buffer
v3: - document helpers in man-page style
    - fix kbuild bugs
    - un-break BPF LWT out hook
    - bpf_push_seg6_encap is now static
    - preempt_enable is now called when the packet is dropped in
      input_action_end_bpf
v4: fix kbuild bugs when CONFIG_IPV6=m
v5: fix kbuild sparse warnings when CONFIG_IPV6=m
v6: fix skb pointers-related bugs in helpers
v7: - fix memory leak in error path of End.BPF setup
    - add freeing of BPF data in seg6_local_destroy_state
    - new enums SEG6_LOCAL_BPF_* instead of re-using ones of lwt bpf for
      netlink nested bpf attributes
    - SEG6_LOCAL_BPF_PROG attr now contains prog->aux->id when dumping
      state
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-24 12:00:24 +02:00
Mathieu Xhonneux
c99a84eac0 selftests/bpf: test for seg6local End.BPF action
Add a new test for the seg6local End.BPF action. The following helpers
are also tested:

- bpf_lwt_push_encap within the LWT BPF IN hook
- bpf_lwt_seg6_action
- bpf_lwt_seg6_adjust_srh
- bpf_lwt_seg6_store_bytes

A chain of End.BPF actions is built. The SRH is injected through a LWT
BPF IN hook before entering this chain. Each End.BPF action validates
the previous one, otherwise the packet is dropped. The test succeeds
if the last node in the chain receives the packet and the UDP datagram
contained can be retrieved from userspace.

Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-24 11:57:36 +02:00
Mathieu Xhonneux
004d4b274e ipv6: sr: Add seg6local action End.BPF
This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.

Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.

Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.

This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.

The BPF program may return 3 types of return codes:
    - BPF_OK: the End.BPF action will look up the next destination through
             seg6_lookup_nexthop.
    - BPF_REDIRECT: if an action has been executed through the
          bpf_lwt_seg6_action helper, the BPF program should return this
          value, as the skb's destination is already set and the default
          lookup should not be performed.
    - BPF_DROP : the packet will be dropped.

Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-24 11:57:36 +02:00
Mathieu Xhonneux
cd3092c7f8 bpf: Split lwt inout verifier structures
The new bpf_lwt_push_encap helper should only be accessible within the
LWT BPF IN hook, and not the OUT one, as this may lead to a skb under
panic.

At the moment, both LWT BPF IN and OUT share the same list of helpers,
whose calls are authorized by the verifier. This patch separates the
verifier ops for the IN and OUT hooks, and allows the IN hook to call the
bpf_lwt_push_encap helper.

This patch is also the occasion to put all lwt_*_func_proto functions
together for clarity. At the moment, socks_op_func_proto is in the middle
of lwt_inout_func_proto and lwt_xmit_func_proto.

Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-24 11:57:36 +02:00