mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
44,921 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Changwoo Min
|
038730dc12 |
sched_ext: Change the event type from u64 to s64
The event count could be negative in the future, so change the event type from u64 to s64. Signed-off-by: Changwoo Min <changwoo@igalia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
Tejun Heo
|
8a9b1585e2 |
sched_ext: Merge branch 'for-6.14-fixes' into for-6.15
Pull for-6.14-fixes to receive: |
||
Andrea Righi
|
b214b04df9 |
tools/sched_ext: Provide a compatible helper for scx_bpf_events()
Introduce __COMPAT_scx_bpf_events() to use scx_bpf_events() in a
compatible way also with kernels that don't provide this kfunc.
This also fixes the following error with scx_qmap when running on a
kernel that does not provide scx_bpf_events():
; scx_bpf_events(&events, sizeof(events)); @ scx_qmap.bpf.c:777
318: (b7) r2 = 72 ; R2_w=72 async_cb
319: <invalid kfunc call>
kfunc 'scx_bpf_events' is referenced but wasn't resolved
Fixes:
|
||
|
Andrea Righi
|
5ae5161820 |
selftests/sched_ext: Add NUMA-aware scheduler test
Add a selftest to validate the behavior of the NUMA-aware scheduler functionalities, including idle CPU selection within nodes, per-node DSQs and CPU to node mapping. Signed-off-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Andrea Righi
|
5e3b64246f |
tools/sched_ext: Provide consistent access to scx flags
Make all the SCX_OPS_* and SCX_PICK_IDLE_* flags available to the user-space part of the schedulers via the compat interface. This allows schedulers / selftests to set all the ops flags in user-space, rather than having them split between BPF and user-space. Signed-off-by: Andrea Righi <arighi@nvidia.com> Acked-by: Changwoo Min <changwoo@igalia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Andrea Righi
|
0e9b4c10e8 |
sched_ext: idle: Introduce scx_bpf_nr_node_ids()
Similarly to scx_bpf_nr_cpu_ids(), introduce a new kfunc scx_bpf_nr_node_ids() to expose the maximum number of NUMA nodes in the system. BPF schedulers can use this information together with the new node-aware kfuncs, for example to create per-node DSQs, validate node IDs, etc. Signed-off-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Andrea Righi
|
01059219b0 |
sched_ext: idle: Introduce node-aware idle cpu kfunc helpers
Introduce a new kfunc to retrieve the node associated to a CPU: int scx_bpf_cpu_node(s32 cpu) Add the following kfuncs to provide BPF schedulers direct access to per-node idle cpumasks information: const struct cpumask *scx_bpf_get_idle_cpumask_node(int node) const struct cpumask *scx_bpf_get_idle_smtmask_node(int node) s32 scx_bpf_pick_idle_cpu_node(const cpumask_t *cpus_allowed, int node, u64 flags) s32 scx_bpf_pick_any_cpu_node(const cpumask_t *cpus_allowed, int node, u64 flags) Moreover, trigger an scx error when any of the non-node aware idle CPU kfuncs are used when SCX_OPS_BUILTIN_IDLE_PER_NODE is enabled. Cc: Yury Norov [NVIDIA] <yury.norov@gmail.com> Signed-off-by: Andrea Righi <arighi@nvidia.com> Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Andrea Righi
|
48849271e6 |
sched_ext: idle: Per-node idle cpumasks
Using a single global idle mask can lead to inefficiencies and a lot of
stress on the cache coherency protocol on large systems with multiple
NUMA nodes, since all the CPUs can create a really intense read/write
activity on the single global cpumask.
Therefore, split the global cpumask into multiple per-NUMA node cpumasks
to improve scalability and performance on large systems.
The concept is that each cpumask will track only the idle CPUs within
its corresponding NUMA node, treating CPUs in other NUMA nodes as busy.
In this way concurrent access to the idle cpumask will be restricted
within each NUMA node.
The split of multiple per-node idle cpumasks can be controlled using the
SCX_OPS_BUILTIN_IDLE_PER_NODE flag.
By default SCX_OPS_BUILTIN_IDLE_PER_NODE is not enabled and a global
host-wide idle cpumask is used, maintaining the previous behavior.
NOTE: if a scheduler explicitly enables the per-node idle cpumasks (via
SCX_OPS_BUILTIN_IDLE_PER_NODE), scx_bpf_get_idle_cpu/smtmask() will
trigger an scx error, since there are no system-wide cpumasks.
= Test =
Hardware:
- System: DGX B200
- CPUs: 224 SMT threads (112 physical cores)
- Processor: INTEL(R) XEON(R) PLATINUM 8570
- 2 NUMA nodes
Scheduler:
- scx_simple [1] (so that we can focus at the built-in idle selection
policy and not at the scheduling policy itself)
Test:
- Run a parallel kernel build `make -j $(nproc)` and measure the average
elapsed time over 10 runs:
avg time | stdev
---------+------
before: 52.431s | 2.895
after: 50.342s | 2.895
= Conclusion =
Splitting the global cpumask into multiple per-NUMA cpumasks helped to
achieve a speedup of approximately +4% with this particular architecture
and test case.
The same test on a DGX-1 (40 physical cores, Intel Xeon E5-2698 v4 @
2.20GHz, 2 NUMA nodes) shows a speedup of around 1.5-3%.
On smaller systems, I haven't noticed any measurable regressions or
improvements with the same test (parallel kernel build) and scheduler
(scx_simple).
Moreover, with a modified scx_bpfland that uses the new NUMA-aware APIs
I observed an additional +2-2.5% performance improvement with the same
test.
[1] https://github.com/sched-ext/scx/blob/main/scheds/c/scx_simple.bpf.c
Cc: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
||
|
Andrea Righi
|
0aaaf89df8 |
sched_ext: idle: Introduce SCX_OPS_BUILTIN_IDLE_PER_NODE
Add the new scheduler flag SCX_OPS_BUILTIN_IDLE_PER_NODE, which allows BPF schedulers to select between using a global flat idle cpumask or multiple per-node cpumasks. This only introduces the flag and the mechanism to enable/disable this feature without affecting any scheduling behavior. Cc: Yury Norov [NVIDIA] <yury.norov@gmail.com> Signed-off-by: Andrea Righi <arighi@nvidia.com> Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Tejun Heo
|
f2c880fc81 |
tools/sched_ext: Sync with scx repo
Synchronize with https://github.com/sched-ext/scx at d384453984a0 ("kernel:
Sync at
|
||
Chuyi Zhou
|
2e2006c91c |
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_
push_{front,back}.
This patch fix this issue. Without this patch, if we use bpf_list kfunc
in scx, the BPF verifier would complain:
libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or
module BTFs
libbpf: failed to load object 'scx_foo'
libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL
With this patch, the bpf list kfunc will work as expected.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Fixes:
|
||
Devaansh Kumar
|
0760d62dad |
sched_ext: selftests: Fix grammar in tests description
Fixed grammar for a few tests of sched_ext. Signed-off-by: Devaansh Kumar <devaanshk840@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Changwoo Min
|
2e7df12bdd |
tools/sched_ext: Update enum_defs.autogen.h
Add where the script is located to the comment lines of the header file. This helps anyone re-generate the header file if required. Note that this is a sync from the PR [1] in the scx repo. [1] https://github.com/sched-ext/scx/pull/1322 Signed-off-by: Changwoo Min <changwoo@igalia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Changwoo Min
|
372033ad9e |
tools/sched_ext: Compatible testing of SCX_ENQ_CPU_SELECTED
This provides compatible testing of SCX_ENQ_CPU_SELECTED.
More specifically, it handles two cases:
1. a BPF scheduler is compiled against vmlinux.h where
SCX_ENQ_CPU_SELECTED is defined, but it runs on a kernel that does not
have SCX_ENQ_CPU_SELECTED. In this case, the test result of
'enq_flags & SCX_ENQ_CPU_SELECTED' will always be false. That test result
is semantically incorrect because the kernel before SCX_ENQ_CPU_SELECTED
has never skipped select_task_rq_scx(), so the result should be true.
2. a BPF scheduler is compiling against vmlinux.h where
SCX_ENQ_CPU_SELECTED is not defined. In this case, directly using
SCX_ENQ_CPU_SELECTED causes compilation errors.
To hide such complexity, introduce __COMPAT_is_enq_cpu_selected(),
which checks if SCX_ENQ_CPU_SELECTED exists in runtime using BPF CO-RE.
This consists of three parts:
1. Add enum_defs.autogen.h, which has macros (HAVE_{enum name}) denoting
whether SCX enums are defined in the vmlinux.h or not.
2. Implement __COMPAT_is_enq_cpu_selected(), which provide the test of
SCX_ENQ_CPU_SELECTED in a compatible way.
3. Use __COMPAT_is_enq_cpu_selected() in scx_qmap.
Note that this is a sync of the relevant PR [1] in the scx repo.
[1] https://github.com/sched-ext/scx/pull/1314
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
||
|
Tejun Heo
|
46a0e16158 |
tool/sched_ext: Event counter dumping updates
- There's no need to dump event counters from both scx_qmap and scx_central. Drop counter dumping from scx_central. - bpf_printk() implies a trailing new line and the explicit new line leads to double new lines. Drop the explicit new lines. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Changwoo Min <changwoo@igalia.com> |
||
|
Tejun Heo
|
29ef4a2fcf |
Merge branch 'for-6.14-fixes' into for-6.15
Pull to receive: - |
||
|
Changwoo Min
|
38d65cd692 |
sched_ext: Print an event, SCX_EV_ENQ_SLICE_DFL, in scx_qmap/central
Modify the scx_qmap and scx_celtral schedulers to print the SCX_EV_ENQ_SLICE_DFL event every second. Signed-off-by: Changwoo Min <changwoo@igalia.com> Acked-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Changwoo Min
|
2494e555fb |
sched_ext: Print core event count in scx_qmap scheduler
Modify the scx_qmap scheduler to print the core event counter every second. Signed-off-by: Changwoo Min <changwoo@igalia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Changwoo Min
|
6df93804b7 |
sched_ext: Print core event count in scx_central scheduler
Modify the scx_central scheduler to print the core event counter every second. Signed-off-by: Changwoo Min <changwoo@igalia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Changwoo Min
|
9865f31d85 |
sched_ext: Add scx_bpf_events() and scx_read_event() for BPF schedulers
scx_bpf_events() is added to the header files so the BPF scheduler can use it. Also, scx_read_event() is added to read an event type in a compatible way. Signed-off-by: Changwoo Min <changwoo@igalia.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Changwoo Min
|
029b6ce733 |
sched_ext: Fix incorrect time delta calculation in time_delta()
When (s64)(after - before) > 0, the code returns the result of
(s64)(after - before) > 0 while the intended result should be
(s64)(after - before). That happens because the middle operand of
the ternary operator was omitted incorrectly, returning the result of
(s64)(after - before) > 0. Thus, add the middle operand
-- (s64)(after - before) -- to return the correct time calculation.
Fixes:
|
||
|
Andrea Righi
|
3c7d51b0d2 |
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
In UP systems p->migration_disabled is not available. Fix this by using
the portable helper is_migration_disabled(p).
Fixes:
|
||
|
Andrea Righi
|
5f52bbf2f6 |
tools/sched_ext: Add helper to check task migration state
Introduce a new helper for BPF schedulers to determine whether a task
can migrate or not (supporting both SMP and UP systems).
Fixes:
|
||
|
Tejun Heo
|
e9fe182772 |
sched_ext: selftests/dsp_local_on: Fix sporadic failures
dsp_local_on has several incorrect assumptions, one of which is that p->nr_cpus_allowed always tracks p->cpus_ptr. This is not true when a task is scheduled out while migration is disabled - p->cpus_ptr is temporarily overridden to the previous CPU while p->nr_cpus_allowed remains unchanged. This led to sporadic test faliures when dsp_local_on_dispatch() tries to put a migration disabled task to a different CPU. Fix it by keeping the previous CPU when migration is disabled. There are SCX schedulers that make use of p->nr_cpus_allowed. They should also implement explicit handling for p->migration_disabled. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ihor Solodrai <ihor.solodrai@pm.me> Cc: Andrea Righi <arighi@nvidia.com> Cc: Changwoo Min <changwoo@igalia.com> |
||
|
Andrea Righi
|
74ca334338 |
selftests/sched_ext: Fix enum resolution
All scx enums are now automatically generated from vmlinux.h and they
must be initialized using the SCX_ENUM_INIT() macro.
Fix the scx selftests to use this macro to properly initialize these
values.
Fixes:
|
||
Linus Torvalds
|
c9c0543b52 |
platform-drivers-x86 for v6.14-1
Highlights:
- acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile
with WMI calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
- ACPI: platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers
concurrently to avoid the need to quirk which handler takes
precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside
the pre-defined profile
- Abstract and layer platform_profile API better using the
class_dev and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
- amd/hsmp: Add support for HSMP protocol v7
- amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
- amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
- dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and
XPS 9550
- Support probing accelerometer for models yet to be listed in
the DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might
be dangerous)
- HID: amd_sfh: Add support for exporting SRA sensor data
- hp-wmi: Add fan and thermal support for Victus 16-s1000
- input: Add key for phone linking
- input: i8042: Add context for the i8042 filter to enable cleaning up
the filter related global variables from pdx86 drivers
- lenovo-wmi-camera: Use SW_CAMERA_LENS_COVER instead of
KEY_CAMERA_ACCESS
- mellanox: mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
- thinkpad_acpi: Add support for phone link key
- tools/power/x86/intel-speed-select: Fix Turbo Ratio Limit restore
- x86-android-tables: Add support for Vexia EDU ATLA 10 Bluetooth and
EC battery driver
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- add support for Acer Nitro AN515-58
- Add support for Acer PH14-51
- Add support for Acer Predator PH16-72
- Fix initialization of last_non_turbo_profile
- Ignore AC events
- Implement proper hwmon support
- Improve error handling when reading gaming system information
- Rename ACER_CAP_FAN_SPEED_READ
- simplify platform profile cycling
- use an ACPI bitmap to set the platform profile choices
- Use devm_platform_profile_register()
- use new helper function for setting overclocks
- use WMI calls for platform profile handling
ACPI: platform-profile:
- Add a name member to handlers
ACPI: platform_profile:
- Add a prefix to log messages
- Add choices attribute for class interface
- Add concept of a "custom" profile
- Add device pointer into platform profile handler
- Add devm_platform_profile_register()
- Add documentation
- Add name attribute to class interface
- Add `ops` member to handlers
- Add platform handler argument to platform_profile_remove()
- Add `probe` to platform_profile_ops
- Add profile attribute for class interface
- Allow multiple handlers
- Check all profile handler to calculate next
- Clean platform_profile_handler
- Create class for ACPI platform profile
- Let drivers set drvdata to the class device
- Make sure all profile handlers agree on profile
- Move matching string for new profile out of mutex
- Move platform_profile_handler
- Move sanity check out of the mutex
- Notify change events on register and unregister
- Notify class device from platform_profile_notify()
- Only show profiles common for all handlers
- Pass the profile handler into platform_profile_notify()
- Remove platform_profile_handler from callbacks
- Remove platform_profile_handler from exported symbols
- Replace *class_dev member with class_dev
- Use guard(mutex) for register/unregister
- Use `scoped_cond_guard`
alienware_wmi:
- General cleanup of WMAX methods
alienware-wmi:
- Improve hdmi_mux, amplifier and deepslp group creation
- Improve rgb-zones group creation
- Modify parse_rgb() signature
- Move Lighting Control State
- Remove unnecessary check at module exit
- Use devm_platform_profile_register()
amd/hsmp:
- Add support for HSMP protocol version 7 messages
- Constify 'struct bin_attribute'
amd/pmc:
- Add STB support for AMD Desktop variants
- Define enum for S2D/PMC msg_port and add helper function
- Isolate STB code changes to a new file
- Move STB block into amd_pmc_s2d_init()
- Move STB functionality to a new file for better code organization
- Update function names to align with new STB file
- Update IP information structure for newer SoCs
- Update S2D message id for 1Ah Family 70h model
- Use ARRAY_SIZE() to fill num_ips information
amd: pmc:
- Use guard(mutex)
amd: pmf:
- Drop all quirks
amd/pmf:
- Enable Custom BIOS Inputs for PMF-TA
- Get SRA sensor data from AMD SFH driver
amd: pmf: sps:
- Use devm_platform_profile_register()
amd: pmf:
- Switch to guard(mutex)
asus-wmi:
- Use devm_platform_profile_register()
dell: dcdbas:
- Constify 'struct bin_attribute'
dell: dell-pc:
- Create platform device
dell-pc:
- Use devm_platform_profile_register()
dell_rbu:
- Constify 'struct bin_attribute'
dell-smo8800:
- Add a couple more models to lis3lv02d_devices[]
- Add support for probing for the accelerometer i2c address
- Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- Move SMO88xx acpi_device_ids to dell-smo8800-ids.h
dell-sysman:
- Directly use firmware_attributes_class
dell-uart-backlight:
- Use blacklight power constant
docs: platform/x86: wmi:
- mention tool for invoking WMI methods
Documentation/ABI:
- Add document for Mellanox PMC driver
- Add new sysfs field to sysfs-platform-mellanox-pmc
Documentation:
- Add documentation about class interface for platform profiles
firmware_attributes_class:
- Drop lifecycle functions
- Move include linux/device/class.h
- Simplify API
fujitsu-laptop:
- replace strcpy -> strscpy
HID: amd_sfh:
- Add support to export device operating states
hp-bioscfg:
- Directly use firmware_attributes_class
hp-wmi:
- Add fan and thermal profile support for Victus 16-s1000
- Use devm_platform_profile_register()
ideapad-laptop:
- Use devm_platform_profile_register()
Input:
- allocate keycode for phone linking
- i8042 - Add support for platform filter contexts
inspur_platform_profile:
- Use devm_platform_profile_register()
int3472:
- Check for adev == NULL
- Debug log the sensor name
- Fix skl_int3472_handle_gpio_resources() return value
- Make "pin number mismatch" message a debug message
intel: bytcrc_pwrsrc:
- fix power_supply dependency
- Optionally register a power_supply dev
intel: int0002_vgpio:
- Make the irqchip immutable
intel/pmt:
- Constify 'struct bin_attribute'
intel: punit_ipc:
- Remove unused function
intel/sdsi:
- Constify 'struct bin_attribute'
intel/tpmi/plr:
- Make char[] longer to silence warning
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS
MAINTAINERS:
- Change AMD PMC driver status to "Supported"
mlxbf-bootctl:
- Constify 'struct bin_attribute'
- use sysfs_emit() instead of sprintf()
mlxbf-pmc:
- Add support for clock_measure performance block
- Add support for monitoring cycle count
- incorrect type in assignment
mlxreg-hotplug:
- use sysfs_emit() instead of sprintf()
mlxreg-io:
- use sysfs_emit() instead of sprintf()
quickstart:
- don't include 'pm_wakeup.h' directly
serdev_helpers:
- Add get_serdev_controller_from_parent() helper
- Check for serial_ctrl_uid == NULL
surface: surface_platform_profile:
- Use devm_platform_profile_register()
think-lmi:
- Directly use firmware_attributes_class
thinkpad_acpi:
- Add support for new phone link hotkey
thinkpad-acpi:
- replace strcpy with strscpy
thinkpad_acpi:
- Use devm_platform_profile_register()
tools/power/x86/intel-speed-select:
- Fix TRL restore after SST-TF disable
- v1.21 release
wmi-bmof:
- Make use of .bin_size() callback
x86-android-tablets:
- Add Bluetooth support for Vexia EDU ATLA 10
- Add missing __init to get_i2c_adap_by_*()
- Add support for getting serdev-controller by PCI parent
- Add Vexia EDU ATLA 10 EC battery driver
- Change x86_instantiate_serdev() prototype
- make platform data be static
- Make variables only used locally static
- Store serdev-controller ACPI HID + UID in a union
Merges:
- Merge branch 'fixes' into 'for-next'
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge import NS conversion from 'https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ5JDNAAKCRBZrE9hU+XO
MT3AAP9YSYaWZUEgV9T/De2C/ksx0XfmHULmtQHccMgqIsIxmAEAmsBOHsDozPuZ
9F2IbT4uBuQo2iwbGq0DhVd+N36kEQw=
=Vz0C
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
|
||
|
Linus Torvalds
|
7685b334d1 |
perf-tools changes for v6.14
There are a lot of changes in the perf tools in this cycle.
build
-----
* Use generic syscall table to generate syscall numbers on supported archs.
* This also enables to get rid of libaudit which was used for syscall numbers.
* Remove python2 support as it's deprecated for years.
* Fix issues on static build with libzstd.
perf record
-----------
* Intel-PT supports "aux-action" config term to pause or resume tracing in
the aux-buffer. Users can start the intel_pt event as "started-paused" and
configure other events to control the Intel-PT tracing.
# perf record --kcore -e intel_pt/aux-action=start-paused/ \
-e syscalls:sys_enter_newuname/aux-action=resume/ \
-e syscalls:sys_exit_newuname/aux-action=pause/ -- uname
This requires the kernel support (which was added in v6.13).
perf lock
---------
* 'perf lock contention' command has an ability to symbolize locks in
dynamically allocated objects using slab cache name when it runs with BPF.
Those dynamic locks would have "&" prefix in the name to distinguish them
from ordinary (static) locks.
# perf lock con -abl -E 5 sleep 1
contended total wait max wait avg wait address symbol
2 1.95 us 1.77 us 975 ns ffff9d5e852d3498 &task_struct (mutex)
1 1.18 us 1.18 us 1.18 us ffff9d5e852d3538 &task_struct (mutex)
4 1.12 us 354 ns 279 ns ffff9d5e841ca800 &kmalloc-cg-512 (mutex)
2 859 ns 617 ns 429 ns ffffffffa41c3620 delayed_uprobe_lock (mutex)
3 691 ns 388 ns 230 ns ffffffffa41c0940 pack_mutex (mutex)
This also requires the kernel/BPF support (which was added in v6.13).
perf ftrace
-----------
* 'perf ftrace latency' command gets a couple of options to support linear
buckets instead of exponential. Also it's possible to specify max and
min latency for the linear buckets.
# perf ftrace latency -abn -T switch_mm_irqs_off --bucket-range=100 \
--min-latency=200 --max-latency=800 -- sleep 1
# DURATION | COUNT | GRAPH |
0 - 200 ns | 186 | ### |
200 - 300 ns | 256 | ##### |
300 - 400 ns | 364 | ####### |
400 - 500 ns | 223 | #### |
500 - 600 ns | 111 | ## |
600 - 700 ns | 41 | |
700 - 800 ns | 141 | ## |
800 - ... ns | 169 | ### |
# statistics (in nsec)
total time: 2162212
avg time: 967
max time: 16817
min time: 132
count: 2236
* As you can see in the above example, it nows shows the statistics at the
end so that users can see the avg/max/min latencies easily.
* 'perf ftrace profile' command has --graph-opts option like 'perf ftrace
trace' so that it can control the tracing behaviors in the same way.
For example, it can limit the function call depth or threshold.
perf script
-----------
* Improve physical memory resolution in 'mem-phys-addr' script by parsing
/proc/iomem file.
# perf script mem-phys-addr -- find /
...
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-85f7fffff : System RAM 8929 69.7
547600000-54785d23f : Kernel data 1240 9.7
546a00000-5474bdfff : Kernel rodata 490 3.8
5480ce000-5485fffff : Kernel bss 121 0.9
0-fff : Reserved 3860 30.1
100000-89c01fff : System RAM 18 0.1
8a22c000-8df6efff : System RAM 5 0.0
Others
------
* 'perf test' gets --runs-per-test option to run the test cases repeatedly.
This would be helpful to see if it's flaky.
* Add 'parse_events' method to Python perf extension module, so that users
can use the same event parsing logic in the python code. One more step
towards implementing perf tools in Python. :)
* Support opening tracepoint events without libtraceevent. This will be
helpful if it won't use the tracing data like in 'perf stat'.
* Update ARM Neoverse N2/V2 JSON events and metrics
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZ5AgiQAKCRCMstVUGiXM
g0WhAP43Dpfatrm1jicTyAogk5D/JrIMOgjGtrJJi5RXG/r0gwD8DSWFzLppS9xy
KGtjLHrN6v6BqR4DCubdlZmRfh9Qjgg=
=M0Kz
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools updates from Namhyung Kim:
"There are a lot of changes in the perf tools in this cycle.
build:
- Use generic syscall table to generate syscall numbers on supported
archs
- This also enables to get rid of libaudit which was used for syscall
numbers
- Remove python2 support as it's deprecated for years
- Fix issues on static build with libzstd
perf record:
- Intel-PT supports "aux-action" config term to pause or resume
tracing in the aux-buffer. Users can start the intel_pt event as
"started-paused" and configure other events to control the Intel-PT
tracing:
# perf record --kcore -e intel_pt/aux-action=start-paused/ \
-e syscalls:sys_enter_newuname/aux-action=resume/ \
-e syscalls:sys_exit_newuname/aux-action=pause/ -- uname
This requires kernel support (which was added in v6.13)
perf lock:
- 'perf lock contention' command has an ability to symbolize locks in
dynamically allocated objects using slab cache name when it runs
with BPF. Those dynamic locks would have "&" prefix in the name to
distinguish them from ordinary (static) locks
# perf lock con -abl -E 5 sleep 1
contended total wait max wait avg wait address symbol
2 1.95 us 1.77 us 975 ns ffff9d5e852d3498 &task_struct (mutex)
1 1.18 us 1.18 us 1.18 us ffff9d5e852d3538 &task_struct (mutex)
4 1.12 us 354 ns 279 ns ffff9d5e841ca800 &kmalloc-cg-512 (mutex)
2 859 ns 617 ns 429 ns ffffffffa41c3620 delayed_uprobe_lock (mutex)
3 691 ns 388 ns 230 ns ffffffffa41c0940 pack_mutex (mutex)
This also requires kernel/BPF support (which was added in v6.13)
perf ftrace:
- 'perf ftrace latency' command gets a couple of options to support
linear buckets instead of exponential. Also it's possible to
specify max and min latency for the linear buckets:
# perf ftrace latency -abn -T switch_mm_irqs_off --bucket-range=100 \
--min-latency=200 --max-latency=800 -- sleep 1
# DURATION | COUNT | GRAPH |
0 - 200 ns | 186 | ### |
200 - 300 ns | 256 | ##### |
300 - 400 ns | 364 | ####### |
400 - 500 ns | 223 | #### |
500 - 600 ns | 111 | ## |
600 - 700 ns | 41 | |
700 - 800 ns | 141 | ## |
800 - ... ns | 169 | ### |
# statistics (in nsec)
total time: 2162212
avg time: 967
max time: 16817
min time: 132
count: 2236
- As you can see in the above example, it nows shows the statistics
at the end so that users can see the avg/max/min latencies easily
- 'perf ftrace profile' command has --graph-opts option like 'perf
ftrace trace' so that it can control the tracing behaviors in the
same way. For example, it can limit the function call depth or
threshold
perf script:
- Improve physical memory resolution in 'mem-phys-addr' script by
parsing /proc/iomem file
# perf script mem-phys-addr -- find /
...
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-85f7fffff : System RAM 8929 69.7
547600000-54785d23f : Kernel data 1240 9.7
546a00000-5474bdfff : Kernel rodata 490 3.8
5480ce000-5485fffff : Kernel bss 121 0.9
0-fff : Reserved 3860 30.1
100000-89c01fff : System RAM 18 0.1
8a22c000-8df6efff : System RAM 5 0.0
Others:
- 'perf test' gets --runs-per-test option to run the test cases
repeatedly. This would be helpful to see if it's flaky
- Add 'parse_events' method to Python perf extension module, so that
users can use the same event parsing logic in the python code. One
more step towards implementing perf tools in Python. :)
- Support opening tracepoint events without libtraceevent. This will
be helpful if it won't use the tracing data like in 'perf stat'
- Update ARM Neoverse N2/V2 JSON events and metrics"
* tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (176 commits)
perf test: Update event_groups test to use instructions
perf bench: Fix undefined behavior in cmpworker()
perf annotate: Prefer passing evsel to evsel->core.idx
perf lock: Rename fields in lock_type_table
perf lock: Add percpu-rwsem for type filter
perf lock: Fix parse_lock_type which only retrieve one lock flag
perf lock: Fix return code for functions in __cmd_contention
perf hist: Fix width calculation in hpp__fmt()
perf hist: Fix bogus profiles when filters are enabled
perf hist: Deduplicate cmp/sort/collapse code
perf test: Improve verbose documentation
perf test: Add a runs-per-test flag
perf test: Fix parallel/sequential option documentation
perf test: Send list output to stdout rather than stderr
perf test: Rename functions and variables for better clarity
perf tools: Expose quiet/verbose variables in Makefile.perf
perf config: Add a function to set one variable in .perfconfig
perf test perftool_testsuite: Return correct value for skipping
perf test perftool_testsuite: Add missing description
perf test record+probe_libc_inet_pton: Make test resilient
...
|
||
|
Linus Torvalds
|
bc8198dc7e |
sched_ext: Changes for v6.14
- scx_bpf_now() added so that BPF scheduler can access the cached timestamp in struct rq to avoid reading TSC multiple times within a locked scheduling operation. - Minor updates to the built-in idle CPU selection logic. - tool/sched_ext updates and other misc changes. Pulling sched_ext/for-6.14 into master causes a merge conflict between the following two commits (first commit in master, second in for-6.14): |
||
|
Linus Torvalds
|
e8744fbc83 |
tracing updates for v6.14:
- Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Update the Rust tracepoint code to use the C code too There was some duplication of the tracepoint code for Rust that did the same logic as the C code. Add a helper that makes it possible for both algorithms to use the same logic in one place. - Add poll to trace event hist files It is useful to know when an event is triggered, or even with some filtering. Since hist files of events get updated when active and the event is triggered, allow applications to poll the hist file and wake up when an event is triggered. This will let the application know that the event it is waiting for happened. - Add :mod: command to enable events for current or future modules The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Add the command where if ':mod:<module>' is written into set_event, then either all the modules events are enabled if it is loaded, or cache it so that the module's events are enabled when it is loaded. This also works from the kernel command line, where "trace_event=:mod:<module>", when the module is loaded at boot up, its events will be enabled then. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5EbMxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qkZsAP9Amgx9frSbR1pn1t0I3wVnQx7khgOu s/b8Ro+vjTx1/QD/RN2AA7f+HK4F27w3Aqfrs0nKXAPtXWsJ9Epp8raG5w8= =Pg+4 -----END PGP SIGNATURE----- Merge tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Update the Rust tracepoint code to use the C code too There was some duplication of the tracepoint code for Rust that did the same logic as the C code. Add a helper that makes it possible for both algorithms to use the same logic in one place. - Add poll to trace event hist files It is useful to know when an event is triggered, or even with some filtering. Since hist files of events get updated when active and the event is triggered, allow applications to poll the hist file and wake up when an event is triggered. This will let the application know that the event it is waiting for happened. - Add :mod: command to enable events for current or future modules The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Add the command where if ':mod:<module>' is written into set_event, then either all the modules events are enabled if it is loaded, or cache it so that the module's events are enabled when it is loaded. This also works from the kernel command line, where "trace_event=:mod:<module>", when the module is loaded at boot up, its events will be enabled then. * tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits) tracing: Fix output of set_event for some cached module events tracing: Fix allocation of printing set_event file content tracing: Rename update_cache() to update_mod_cache() tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES selftests/ftrace: Add test that tests event :mod: commands tracing: Cache ":mod:" events for modules not loaded yet tracing: Add :mod: command to enabled module events selftests/tracing: Add hist poll() support test tracing/hist: Support POLLPRI event for poll on histogram tracing/hist: Add poll(POLLIN) support on hist file tracing: Fix using ret variable in tracing_set_tracer() tracepoint: Reduce duplication of __DO_TRACE_CALL tracing/string: Create and use __free(argv_free) in trace_dynevent.c tracing: Switch trace_stat.c code over to use guard() tracing: Switch trace_stack.c code over to use guard() tracing: Switch trace_osnoise.c code over to use guard() and __free() tracing: Switch trace_events_synth.c code over to use guard() tracing: Switch trace_events_filter.c code over to use guard() tracing: Switch trace_events_trigger.c code over to use guard() tracing: Switch trace_events_hist.c code over to use guard() ... |
||
|
Linus Torvalds
|
7f71554b4e |
ktest updates for v6.14:
- Fix use of KERNEL_VERSION in newly created output directory If a new output directory is created (O=/dir), and one of the options uses KERNEL_VERSION which will run a "make kernelversion" in the output directory, it will fail because there is no config file yet. In this case, have it do a "make allnoconfig" which is the minimal needed to run the "make kernelversion". - Remove unused variables - Fix some typos -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5AsqBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qlfJAQCmRlwC8x+AVy2lij2sTqM8nfB7DfTF QMavz/I1xn0f3wD/bxVfN8SebrCBBiICW09bvnWzqzyzgFsjjxRRq+Zzvwc= =qfZn -----END PGP SIGNATURE----- Merge tag 'ktest-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: - Fix use of KERNEL_VERSION in newly created output directory If a new output directory is created (O=/dir), and one of the options uses KERNEL_VERSION which will run a "make kernelversion" in the output directory, it will fail because there is no config file yet. In this case, have it do a "make allnoconfig" which is the minimal needed to run the "make kernelversion". - Remove unused variables - Fix some typos * tag 'ktest-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest.pl: Fix typo "accesing" ktest.pl: Fix typo in comment ktest.pl: Remove unused declarations in run_bisect_test function ktest.pl: Check kernelrelease return in get_version |
||
|
Linus Torvalds
|
d0d106a2bd |
bpf-next-6.14
-----BEGIN PGP SIGNATURE-----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=f2CA
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
|
||
|
Linus Torvalds
|
21266b8df5 |
AT_EXECVE_CHECK introduction for v6.14-rc1
- Implement AT_EXECVE_CHECK flag to execveat(2) (Mickaël Salaün) - Implement EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits (Mickaël Salaün) - Add selftests and samples for AT_EXECVE_CHECK (Mickaël Salaün) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ4hO7wAKCRA2KwveOeQk u4l+AP9UHO1KwMn3aOt6uFPj7omaoY0vpcB1rx/x5s4efNFHOAD/QjY0f+ND+HzF mKLYOIeacGEQi7TNhpnOkGjz6jzSiwg= =sMhZ -----END PGP SIGNATURE----- Merge tag 'AT_EXECVE_CHECK-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull AT_EXECVE_CHECK from Kees Cook: - Implement AT_EXECVE_CHECK flag to execveat(2) (Mickaël Salaün) - Implement EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits (Mickaël Salaün) - Add selftests and samples for AT_EXECVE_CHECK (Mickaël Salaün) * tag 'AT_EXECVE_CHECK-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ima: instantiate the bprm_creds_for_exec() hook samples/check-exec: Add an enlighten "inc" interpreter and 28 tests selftests: ktap_helpers: Fix uninitialized variable samples/check-exec: Add set-exec selftests/landlock: Add tests for execveat + AT_EXECVE_CHECK selftests/exec: Add 32 tests for AT_EXECVE_CHECK and exec securebits security: Add EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits exec: Add a new AT_EXECVE_CHECK flag to execveat(2) |
||
|
Linus Torvalds
|
de5817bbfb |
Landlock updates for v6.14-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZ5EMhBAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSMv0BAMOG2TFwq+UhbtxtL6pM7qzxfdWg6GR/t4t8 MFasAcCaAQDtTnW0HymHge8k7JFgWHHp0JBu7V7dhFrdJoS+718aDA== =1Hfr -----END PGP SIGNATURE----- Merge tag 'landlock-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "This mostly factors out some Landlock code and prepares for upcoming audit support. Because files with invalid modes might be visible after filesystem corruption, Landlock now handles those weird files too. A few sample and test issues are also fixed" * tag 'landlock-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add layout1.umount_sandboxer tests selftests/landlock: Add wrappers.h selftests/landlock: Fix error message landlock: Optimize file path walks and prepare for audit support selftests/landlock: Add test to check partial access in a mount tree landlock: Align partial refer access checks with final ones landlock: Simplify initially denied access rights landlock: Move access types landlock: Factor out check_access_path() selftests/landlock: Fix build with non-default pthread linking landlock: Use scoped guards for ruleset in landlock_add_rule() landlock: Use scoped guards for ruleset landlock: Constify get_mode_access() landlock: Handle weird files samples/landlock: Fix possible NULL dereference in parse_path() selftests/landlock: Remove unused macros in ptrace_test.c |
||
|
Linus Torvalds
|
37b33c68b0 |
CRC updates for 6.14
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be directly accessible via the library API, instead of requiring the crypto API. This is much simpler and more efficient. - Convert some users such as ext4 to use the CRC32 library API instead of the crypto API. More conversions like this will come later. - Add a KUnit test that tests and benchmarks multiple CRC variants. Remove older, less-comprehensive tests that are made redundant by this. - Add an entry to MAINTAINERS for the kernel's CRC library code. I'm volunteering to maintain it. I have additional cleanups and optimizations planned for future cycles. These patches have been in linux-next since -rc1. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ418ZRQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyJYAP9kBlpm8W9/XY6N8SpjKaXE/vKQYHQl Nobhak06Us8uJwEAkcUTymWP4IwQj5A9jgBAPRw53FQcNVKIc+01C7gRHw0= =mqSH -----END PGP SIGNATURE----- Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull CRC updates from Eric Biggers: - Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be directly accessible via the library API, instead of requiring the crypto API. This is much simpler and more efficient. - Convert some users such as ext4 to use the CRC32 library API instead of the crypto API. More conversions like this will come later. - Add a KUnit test that tests and benchmarks multiple CRC variants. Remove older, less-comprehensive tests that are made redundant by this. - Add an entry to MAINTAINERS for the kernel's CRC library code. I'm volunteering to maintain it. I have additional cleanups and optimizations planned for future cycles. * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits) MAINTAINERS: add entry for CRC library powerpc/crc: delete obsolete crc-vpmsum_test.c lib/crc32test: delete obsolete crc32test.c lib/crc16_kunit: delete obsolete crc16_kunit.c lib/crc_kunit.c: add KUnit test suite for CRC library functions powerpc/crc-t10dif: expose CRC-T10DIF function through lib arm64/crc-t10dif: expose CRC-T10DIF function through lib arm/crc-t10dif: expose CRC-T10DIF function through lib x86/crc-t10dif: expose CRC-T10DIF function through lib crypto: crct10dif - expose arch-optimized lib function lib/crc-t10dif: add support for arch overrides lib/crc-t10dif: stop wrapping the crypto API scsi: target: iscsi: switch to using the crc32c library f2fs: switch to using the crc32 library jbd2: switch to using the crc32c library ext4: switch to using the crc32c library lib/crc32: make crc32c() go directly to lib bcachefs: Explicitly select CRYPTO from BCACHEFS_FS x86/crc32: expose CRC32 functions through lib x86/crc32: update prototype for crc32_pclmul_le_16() ... |
||
|
Linus Torvalds
|
7004a2e46d |
linux_kselftest-nolibc-6.14-rc1
- adds support for waitid() - uses waitid() over waitpid() - uses a pipe to in vfprintf tests - skips tests for unimplemented syscalls - renames riscv to riscv64 - adds configurations for riscv32 - adds detecting missing toolchain to run-tests.sh -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmeQGFQACgkQCwJExA0N QxzStg/9H8ZSEtoGkMEtgW6jbXGTfmUZWOK/4KN6LJDiCl6Hrvyj9Tf5f4nFOhL2 8eR9hYMGxx3kawY3qoGgQaotj2thlBLUGQVY8vLMnBIrA2r2mMmFOwwK4FtxBHHf jI37bvXvfIx8DzaUllZfDMs+hLSeteS1Qcq8n6nnuVTyrG8/Zt32Dal7pOf+rGh4 C81L82n0vwOrj69vlfGIOBrhzoy0XWIvHWTxBY5EUzIpmRonAo3Us/pkMmTndU4K xFLzDldttIjtIrKI0qKPhipKrx5tmIzQbpTN3K+u8dgeFEGASsi7NdyctW5SRcYc efAvZxt91bQ9WpysSC+KWKpsO56nQ0MrpqLCnVK+fL5QrDqjAimRES3J6Aij9+Hs ojliXn6AO1aA7mXm/nLvcJIMV0i9CufVv/H2ZfVMxgCObN5mzlXmsEESI4fkROK4 ZnkvYVMQBvQTtdoILOwFqu6mDKWwNitjNNvlePMtSFxFRkzMxal+LitV6cB0LFV5 OIqh8w69MShBD1jTA1TQJOA9G1HMiB9Fm+kjT4U6H9sgSJaKzV4+n1XeFpVTWM6B TpI/kFL99V9pkPbZH17jRjIOg+0o3T2acs4FZsJ+jDt8hEk6qVy5sN1a4G6GTxyl +Oc204YJEQ9hLNiXljSiEzYrAvFIa055PzEuni3PFBxMisNKTjM= =jwYX -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-nolibc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull nolibc updates from Shuah Khan: - add support for waitid() - use waitid() over waitpid() - use a pipe in vfprintf tests - skip tests for unimplemented syscalls - rename riscv to riscv64 - add configurations for riscv32 - add detecting missing toolchain to run-tests.sh * tag 'linux_kselftest-nolibc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/nolibc: add configurations for riscv32 selftests/nolibc: rename riscv to riscv64 selftests/nolibc: skip tests for unimplemented syscalls selftests/nolibc: use a pipe to in vfprintf tests selftests/nolibc: use waitid() over waitpid() tools/nolibc: add support for waitid() selftests/nolibc: run-tests.sh: detect missing toolchain |
||
|
Linus Torvalds
|
e8f17cb6f5 |
linux_kselftest-kunit-6.14-rc1
- fixes struct completion warning - introduces autorun option - adds fallback for os.sched_getaffinity - enables hardware acceleration when available -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmeQDEwACgkQCwJExA0N QxzsahAAod2fq5NoQ+SY/x5oc5v0k8tV8pbrdcJBMDx5iKAf/B+EBmqsKHs5VuBi /fUkSQiTndFjXTxZbS1zTRN4XfO5H6AUVmazfHAGhIL4QEsyOocGXIEHwlhHYmLP YwOA2UTS7FilIZA0Z9slKiKnxCZga7pp6Et11rwnydDro2XvPhsnsi9FHchjYmXx lQyaO17RHf5z+LfNAH3j8wsYU910z/Vg5AE1kZ7ckcftFgPXpiK2P2XtDTAKZz4D p7qW6kntUQ9994HbhCa+fw5YIFdSy8fL9QG9uBdWb0x03dQzNkW8mOs8I6DWr4Kw cVp06829K/fpwy3P15mVFjv8cO7W8t74LBGq/EipjQ8eA2RhfkZdwNE/awH9GBDS kjjlNfIh+U4wY6++SAF58k1bZorVgpZfRtpl1anfftEOlex+JPKXaJpoZloMZ/P9 Jh8BtZ+yc16tDkNQlqT24CeSGiC4GvtqUBytXvwGjEdUFzIS+bXGPwHpKrVlHWVV lpntJiUEqIbgZ+XS4UxDHBqXbYKRv7sUlToMJNkMEO5Hz5ok57NjxuPmbfS+LJdk uc6gEH3aAlyI52uJZqotcRmmea52S1HZSUO9E80yl/cS5PHysTlivTXCm85PI7GV a6T43DgnpBqqWPHafnm93DSvlx/wl1LU2JsRYeXp59CkXonlNUk= =caDL -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-kunit-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: - fix struct completion warning - introduce autorun option - add fallback for os.sched_getaffinity - enable hardware acceleration when available * tag 'linux_kselftest-kunit-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Introduce autorun option kunit: enable hardware acceleration when available kunit: add fallback for os.sched_getaffinity kunit: platform: Resolve 'struct completion' warning |
||
|
Linus Torvalds
|
8fb1e2eed1 |
linux_kselftest-next-6.14-rc1
- fixes, reporting improvements, and cleanup changes to several tests - adds support for DT_GNU_HASH to selftests/vDSO -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmeQARsACgkQCwJExA0N QxygPQ/8CACwz0b/nOEIcVIcwuShkqkjToi5H4LxDDXkt80SFgxzjYATPIvIiFas ZCZFz088VkSKFhNJnjwWz2AjWhvpuF2yhbkIoYPbvlzBtOVzP1DvaAcsmWSinOoa jjGY/EjgT3nS5S277cZ+h335FYID52YMG0dR2N3rdUYTzSGth2dLAB63IMHM7/jX +Nzlwf77FzWZi0M+2/cc4D8C5gt0HfM3IeEPsO7uSjFIGH1voirEC86E7+MV7F5E mQ57T4AMg2MZmcH7laFRkKf3i0G3rkpxFrVdNvr1nNMGxeBQeZERWQVYmp/viZXP QhKQQMaMmwSXORQb/CbZUGMHvUGPCmK2n9hJoXkePR8sfO6yjywE/uIZFaRlq6IE 9M2Qe+5/7iSziakBbhw3F4xYTI1VLe2RPj1IoB0eMUg5UNGYIQ1OaM5F/6Ol6w1z 4mf2XmoyDb5D5vxFlqDjxio56NVJO5+7588oexKm0BkQgDU3F88tQ8wIbPryl/yf lMDiLQlDF3SF5NpNtd7cwYB1m/VqtT7n/hJVwwQNTO2GylgpMYLRQdAPZcVetuxA LIuqrd7hOg7tem1OvuU8SERJfTzs2DA9UcBxgJcNDBH9HxgZ66tA++Q84L/UcFof oZn6WOrM6fLvIvkBp+fVKw7vt/BpzvVpRu66lwx6SwWlkTxILtU= =XSsc -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-next-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - fixes, reporting improvements, and cleanup changes to several tests - add support for DT_GNU_HASH to selftests/vDSO * tag 'linux_kselftest-next-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/rseq: Fix handling of glibc without rseq support selftests/resctrl: Discover SNC kernel support and adjust messages selftests/resctrl: Adjust effective L3 cache size with SNC enabled selftests/ftrace: Make uprobe test more robust against binary name selftests/ftrace: Fix to use remount when testing mount GID option selftests: tmpfs: Add kselftest support to tmpfs selftests: tmpfs: Add Test-skip if not run as root selftests: harness: fix printing of mismatch values in __EXPECT() selftests/ring-buffer: Add test for out-of-bound pgoff mapping selftests/run_kselftest.sh: Fix help string for --per-test-log selftests: acct: Add ksft_exit_skip if not running as root selftests: kselftest: Fix the wrong format specifier selftests: timers: clocksource-switch: Adapt progress to kselftest framework selftests/zram: gitignore output file selftests/filesystems: Add missing gitignore file selftests: Warn about skipped tests in result summary selftests: kselftest: Add ksft_test_result_xpass selftests/vDSO: support DT_GNU_HASH selftests/ipc: Remove unused variables selftest: media_tests: fix trivial UAF typo |
||
|
Linus Torvalds
|
27c0278477 |
hid-for-linus-2025012001
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEL65usyKPHcrRDEicpmLzj2vtYEkFAmeOFTYACgkQpmLzj2vt YEkzxw//TysEhHRBl7Fff+pTDSCag7xuJHso+U/y2iqXCJM/zpX8vp4EOV6A0Fwa 2UbhaR5IASHjytAE7rwStlaOScgG04mmgB9Rj+OXbjM+2M/VDQbeM/CRrZb7LJDZ rFgz0W84M3tCRxkqtEID42Q+1n7K3Fxv/DJYSPofMuT6t9H8qEb+n8mgVOXp/B1U nAEoLmxBvDPqiWxpfIHcVZ3fDZglp74906LcayfVbOAt7Q0xZkGfj7Etw5uWx/yE H60GgFpDGQj56OGDEB/pyQFEEeIIJfvq77wCPPk0RmITbBkTW6KPV6SJorW4pgQU ruQXQSaToxePm9TvmumJ08vfLYNpaMJ5TUkWk74ccFe/9aNpSdvO5miHIcIhbE8B ooV0ojqU/TyTYE/UbEnsoxvlZUhX8v3zzfmPw+rUcZTn4imHTVkHuw/4iDWX+ZxP 2v8n1Wwle+ofBuy5PS32MUHDwDnEQRulWSrOHDFmRXoISM7/RGKLARGUqcOwsRmF 0sZSyCrXU3GSfNF8sVMv5SYKEW+feqKLanL7Hna7LnUaw4DRarWRqXmHXc5sfcY/ PP1hpdA/iJ44su1M07dBaVkM1bqn5u7BngOgvTCQVo0Nr4NftyBzkjGz715DFIrz w2eYvZpaPXyGsRb+JiTRVaa9PI/P1E7heZrQTCnc8zqUCZMVVlM= =WYkk -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2025012001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - newly added support for Intel Touch Host Controller (Even Xu, Xinpeng Sun) - hid-core fix for long-standing syzbot-reported cornercase of Resolution Multiplier not being present in any of the Logical Collections in the device HID report descriptor (Alan Stern) - improvement of behavior for non-standard LED brightness values for Wacom driver (Jason Gerecke) - PCI Wacom device support (depends on Intel THC support) (Even Xu) - SteelSeries Arctis 9 support (Christian Mayer) - constification of 'struct bin_attribute' in various HID driver (Thomas Weißschuh) - other assorted code cleanups / fixes and device ID additions * tag 'hid-for-linus-2025012001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (63 commits) HID: hid-asus: Disable OOBE mode on the ProArt P16 HID: steelseries: remove unnecessary return HID: steelseries: export model and manufacturer HID: steelseries: export charging state for the SteelSeries Arctis 9 headset HID: steelseries: add SteelSeries Arctis 9 support HID: steelseries: preparation for adding SteelSeries Arctis 9 support HID: intel-thc-hid: fix build errors in um mode HID: intel-thc-hid: intel-quicki2c: fix potential memory corruption HID: intel-thc-hid: intel-thc: Fix error code in thc_i2c_subip_init() HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch HID: uclogic: make const read-only array touch_ring_model_params_buf static HID: hid-steam: Make sure rumble work is canceled on removal HID: Wacom: Add PCI Wacom device support HID: intel-thc-hid: intel-quicki2c: Add PM implementation HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver HID: intel-thc-hid: intel-quicki2c: Add HIDI2C protocol implementation HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver hid layer HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton HID: intel-thc-hid: intel-quickspi: Add PM implementation ... |
||
|
Linus Torvalds
|
f4b9d3bf44 |
Power management updates for 6.14-rc1
- Use str_enable_disable()-like helpers in cpufreq (Krzysztof
Kozlowski).
- Extend the Apple cpufreq driver to support more SoCs (Hector Martin,
Nick Chan).
- Add new cpufreq driver for Airoha SoCs (Christian Marangi).
- Fix using cpufreq-dt as module (Andreas Kemnade).
- Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
Edwards, Sibi Sankar, Manivannan Sadhasivam).
- Fix the maximum supported frequency computation in the ACPI cpufreq
driver to avoid relying on unfounded assumptions (Gautham Shenoy).
- Fix an amd-pstate driver regression with preferred core rankings not
being used (Mario Limonciello).
- Fix a precision issue with frequency calculation in the amd-pstate
driver (Naresh Solanki).
- Add ftrace event to the amd-pstate driver for active mode (Mario
Limonciello).
- Set default EPP policy on Ryzen processors in amd-pstate (Mario
Limonciello).
- Clean up the amd-pstate cpufreq driver and optimize it to increase
code reuse (Mario Limonciello, Dhananjay Ugwekar).
- Use CPPC to get scaling factors between HWP performance levels and
frequency in the intel_pstate driver and make it stop using a built
-in scaling factor for Arrow Lake processors (Rafael Wysocki).
- Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN for
consistency with CPU offline (Christian Loehle).
- Fix superfluous updates caused by need_freq_update in the schedutil
cpufreq governor (Sultan Alsawaf).
- Allow configuring the system suspend-resume (DPM) watchdog to warn
earlier than panic (Douglas Anderson).
- Implement devm_device_init_wakeup() helper and introduce a device-
managed variant of dev_pm_set_wake_irq() (Joe Hattori, Peng Fan).
- Remove direct inclusions of 'pm_wakeup.h' which should be only
included via 'device.h' (Wolfram Sang).
- Clean up two comments in the core system-wide PM code (Rafael
Wysocki, Randy Dunlap).
- Add Clearwater Forest processor support to the intel_idle cpuidle
driver (Artem Bityutskiy).
- Clean up the Exynos devfreq driver and devfreq core (Markus Elfring,
Jeongjun Park).
- Minor cleanups and fixes for OPP (Dan Carpenter, Neil Armstrong, Joe
Hattori).
- Implement dev_pm_opp_get_bw() (Neil Armstrong).
- Expose OPP reference counting helpers for Rust (Viresh Kumar).
- Fix TSC MHz calculation in cpupower (He Rongguang).
- Add install and uninstall options to bindings Makefile and add header
changes for cpufreq.h to SWIG bindings in cpupower (John B. Wyatt IV).
- Add missing residency header changes in cpuidle.h to SWIG bindings in
cpupower (John B. Wyatt IV).
- Add output files to .gitignore and clean them up in "make clean" in
selftests/cpufreq (Li Zhijian).
- Fix cross-compilation in cpupower Makefile (Peng Fan).
- Revise the is_valid flag handling for idle_monitor in the cpupower
utility (wangfushuai).
- Extend and clean up AMD processors support in cpupower (Mario
Limonciello).
-----BEGIN PGP SIGNATURE-----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=AoMC
-----END PGP SIGNATURE-----
Merge tag 'pm-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of changes here are cpufreq updates which are dominated
by amd-pstate driver changes, like in the previous cycle. Moreover,
changes related to amd-pstate are also the majority of cpupower
utility updates.
Included are some pieces of new hardware support, like the addition of
Clearwater Forest processors support to intel_idle, new cpufreq driver
for Airoha SoCs, and Apple cpufreq driver extensions to support more
SoCs. The intel_pstate driver is also extended to be able to support
new platforms by using ACPI CPPC to compute scaling factors between
HWP performance states and frequency.
The rest is mostly fixes and cleanups in assorted pieces of power
management code.
Specifics:
- Use str_enable_disable()-like helpers in cpufreq (Krzysztof
Kozlowski)
- Extend the Apple cpufreq driver to support more SoCs (Hector
Martin, Nick Chan)
- Add new cpufreq driver for Airoha SoCs (Christian Marangi)
- Fix using cpufreq-dt as module (Andreas Kemnade)
- Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
Edwards, Sibi Sankar, Manivannan Sadhasivam)
- Fix the maximum supported frequency computation in the ACPI cpufreq
driver to avoid relying on unfounded assumptions (Gautham Shenoy)
- Fix an amd-pstate driver regression with preferred core rankings
not being used (Mario Limonciello)
- Fix a precision issue with frequency calculation in the amd-pstate
driver (Naresh Solanki)
- Add ftrace event to the amd-pstate driver for active mode (Mario
Limonciello)
- Set default EPP policy on Ryzen processors in amd-pstate (Mario
Limonciello)
- Clean up the amd-pstate cpufreq driver and optimize it to increase
code reuse (Mario Limonciello, Dhananjay Ugwekar)
- Use CPPC to get scaling factors between HWP performance levels and
frequency in the intel_pstate driver and make it stop using a
built-in scaling factor for Arrow Lake processors (Rafael Wysocki)
- Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN
for consistency with CPU offline (Christian Loehle)
- Fix superfluous updates caused by need_freq_update in the schedutil
cpufreq governor (Sultan Alsawaf)
- Allow configuring the system suspend-resume (DPM) watchdog to warn
earlier than panic (Douglas Anderson)
- Implement devm_device_init_wakeup() helper and introduce a device-
managed variant of dev_pm_set_wake_irq() (Joe Hattori, Peng Fan)
- Remove direct inclusions of 'pm_wakeup.h' which should be only
included via 'device.h' (Wolfram Sang)
- Clean up two comments in the core system-wide PM code (Rafael
Wysocki, Randy Dunlap)
- Add Clearwater Forest processor support to the intel_idle cpuidle
driver (Artem Bityutskiy)
- Clean up the Exynos devfreq driver and devfreq core (Markus
Elfring, Jeongjun Park)
- Minor cleanups and fixes for OPP (Dan Carpenter, Neil Armstrong,
Joe Hattori)
- Implement dev_pm_opp_get_bw() (Neil Armstrong)
- Expose OPP reference counting helpers for Rust (Viresh Kumar)
- Fix TSC MHz calculation in cpupower (He Rongguang)
- Add install and uninstall options to bindings Makefile and add
header changes for cpufreq.h to SWIG bindings in cpupower (John B.
Wyatt IV)
- Add missing residency header changes in cpuidle.h to SWIG bindings
in cpupower (John B. Wyatt IV)
- Add output files to .gitignore and clean them up in "make clean" in
selftests/cpufreq (Li Zhijian)
- Fix cross-compilation in cpupower Makefile (Peng Fan)
- Revise the is_valid flag handling for idle_monitor in the cpupower
utility (wangfushuai)
- Extend and clean up AMD processors support in cpupower (Mario
Limonciello)"
* tag 'pm-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
PM / OPP: Add reference counting helpers for Rust implementation
PM: sleep: wakeirq: Introduce device-managed variant of dev_pm_set_wake_irq()
cpufreq: Use str_enable_disable()-like helpers
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic
PM: sleep: convert comment from kernel-doc to plain comment
cpufreq: ACPI: Fix max-frequency computation
pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG
PM / devfreq: exynos: remove unused function parameter
OPP: OF: Fix an OF node leak in _opp_add_static_v2()
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
pm: cpupower: Add header changes for cpufreq.h to SWIG bindings
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
...
|
||
|
Linus Torvalds
|
0ad9617c78 |
Networking changes for 6.14.
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmePf5YSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkUcMQALblhkGTxurnfT+yK+Bsuhn2LoHl2RPN
4u2Kjkzm+2FYgcw6lS17cFXsnfAPlRIpmhnmKk1EBgsBdkuL29c+jtqnljA2bboD
tIMhMgWiaLS3xgEMrLeKnseIo0G9mviQRphGeZPFTaLb4Ww/bd5LAp4ZGc5oij76
tURatC3b6MuO4Lt5U+jWKnRwviXku8udHkVHXlvPdirawHCVinmx3tvce/BI/MaD
eUOp6ZeJCPCOLtk7b8WEyxxvdY0f6D9ed82qfPDHjb94SJv+Vxb38RZtNuApIjn9
S0KdlNih/4flDy17LDxGYSyFps78lUFRbpqmsUlnZkyLXpsph7/WTvAmMAFcrX0K
UgQ/F/q5GAvcP5WZcCj5+tZaRmfKQraQirXMtYU/Uj50qCnSU7ssyACASt23GLZ8
OF8tCLlm9lLOU1B6Ofkul1Dbo5f0Xpaghga4dFb0kzSfbm78fTUnqBNsJ7jIkWfi
fD6dO+fg+p2ZMD0CACGo3CNxQuJmaQWg6BIDeno6God8kZ6qBMxY/sFr4qozrvFH
x/FgQq8dgc8WLmaPejKiNIPkdQepXrIiv3T9jgMVyEjJnWB/LBfyWKSQOdTfnLs+
rgr4YMV6XW4bx0fYqTI8B9jZ+FCWbG6sn4UtRTHITKcd3FSvd8Y+PHa5YyCUWvJM
l8pePMGF0XVF
=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
|
||
|
Linus Torvalds
|
f96a974170 |
lsm/stable-6.14 PR 20250121
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmeQFBoUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPvcA//XCdwMz0bGtWKv58nuyP8vkQx08n6 //olz/O8te3uWK5O3kRiarzFLwH8qsHQ6A7GYalwwix34hatR4ndJE0Y/guVRWa1 +aBmJxJ7Jm/q3fvpAEfqiSgreuE6kBoztlDOWEq+hUQGu4qfnQGm2EnvbvfFrAmN VheOfIQSU2KCL/Scc3FGnF6uru4WrqN0JJ9RbvrEpfdQgmcyTGLnQsZLljutWSIq kDWkteIr7cj3O9J45zpxZsTftvYSgVn/y1iKeXbHI4DBA1eheK12vsHB9AADKI1J GwHxOrnLpZtv+ICUKqcfFTmWTl+NmfJJurAT5KXKdBjL3xM5MoJlBvK1A5qE9CMo LaHVG/TZR2MmBaoM3EN+gvWhDgWlvT02Q/0cYaafTlVLMez3HtfctxN6OnCvTXTB Y8dqYClhhlBm/mHQwYfMoeKw4MftUpzEqBd1Nj7Qe8dbP0f/62Ca3K2B3D6Rf8QV pj3ryMlSWYV9mdTerruLNQexTGoN7l66jPwzdWpTbFeL3WmNtfCako8OZGbXgPIu Iahm3P+jnSVx8ZQro2c9zwdKXI5xiI335pCBbDZ8aX+JAsfj0OofHsFx5Q5diber M7tAEhxDqRisbpz7Ei+/LOAEGg2Z619XKg8ks4z6Y4P5PF7zEgeWTkZJk2iLbxXe 6LLOjmF7LLw+G4M= =fgyr -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - Improved handling of LSM "secctx" strings through lsm_context struct The LSM secctx string interface is from an older time when only one LSM was supported, migrate over to the lsm_context struct to better support the different LSMs we now have and make it easier to support new LSMs in the future. These changes explain the Rust, VFS, and networking changes in the diffstat. - Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are enabled Small tweak to be a bit smarter about when we build the LSM's common audit helpers. - Check for absurdly large policies from userspace in SafeSetID SafeSetID policies rules are fairly small, basically just "UID:UID", it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which helps quiet a number of syzbot related issues. While work is being done to address the syzbot issues through other mechanisms, this is a trivial and relatively safe fix that we can do now. - Various minor improvements and cleanups A collection of improvements to the kernel selftests, constification of some function parameters, removing redundant assignments, and local variable renames to improve readability. * tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lockdown: initialize local array before use to quiet static analysis safesetid: check size of policy writes net: corrections for security_secid_to_secctx returns lsm: rename variable to avoid shadowing lsm: constify function parameters security: remove redundant assignment to return variable lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test binder: initialize lsm_context structure rust: replace lsm context+len with lsm_context lsm: secctx provider check on release lsm: lsm_context in security_dentry_init_security lsm: use lsm_context in security_inode_getsecctx lsm: replace context+len with lsm_context lsm: ensure the correct LSM context releaser |
||
|
Linus Torvalds
|
2e04247f7c |
ftrace updates for v6.14:
- Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ42E2RQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqXSAPwOMxuhye8tb1GYG62QD9+w7e6nOmlC 2GCPj4detnEM2QD/ciivkhespVKhHpZHRewAuSnJgHPSM45NQ3EVESzjWQ4= =snbx -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Have fprobes built on top of function graph infrastructure The fprobe logic is an optimized kprobe that uses ftrace to attach to functions when a probe is needed at the start or end of the function. The fprobe and kretprobe logic implements a similar method as the function graph tracer to trace the end of the function. That is to hijack the return address and jump to a trampoline to do the trace when the function exits. To do this, a shadow stack needs to be created to store the original return address. Fprobes and function graph do this slightly differently. Fprobes (and kretprobes) has slots per callsite that are reserved to save the return address. This is fine when just a few points are traced. But users of fprobes, such as BPF programs, are starting to add many more locations, and this method does not scale. The function graph tracer was created to trace all functions in the kernel. In order to do this, when function graph tracing is started, every task gets its own shadow stack to hold the return address that is going to be traced. The function graph tracer has been updated to allow multiple users to use its infrastructure. Now have fprobes be one of those users. This will also allow for the fprobe and kretprobe methods to trace the return address to become obsolete. With new technologies like CFI that need to know about these methods of hijacking the return address, going toward a solution that has only one method of doing this will make the kernel less complex. - Cleanup with guard() and free() helpers There were several places in the code that had a lot of "goto out" in the error paths to either unlock a lock or free some memory that was allocated. But this is error prone. Convert the code over to use the guard() and free() helpers that let the compiler unlock locks or free memory when the function exits. - Remove disabling of interrupts in the function graph tracer When function graph tracer was first introduced, it could race with interrupts and NMIs. To prevent that race, it would disable interrupts and not trace NMIs. But the code has changed to allow NMIs and also interrupts. This change was done a long time ago, but the disabling of interrupts was never removed. Remove the disabling of interrupts in the function graph tracer is it is not needed. This greatly improves its performance. - Allow the :mod: command to enable tracing module functions on the kernel command line. The function tracer already has a way to enable functions to be traced in modules by writing ":mod:<module>" into set_ftrace_filter. That will enable either all the functions for the module if it is loaded, or if it is not, it will cache that command, and when the module is loaded that matches <module>, its functions will be enabled. This also allows init functions to be traced. But currently events do not have that feature. Because enabling function tracing can be done very early at boot up (before scheduling is enabled), the commands that can be done when function tracing is started is limited. Having the ":mod:" command to trace module functions as they are loaded is very useful. Update the kernel command line function filtering to allow it. * tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits) ftrace: Implement :mod: cache filtering on kernel command line tracing: Adopt __free() and guard() for trace_fprobe.c bpf: Use ftrace_get_symaddr() for kprobe_multi probes ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr Documentation: probes: Update fprobe on function-graph tracer selftests/ftrace: Add a test case for repeating register/unregister fprobe selftests: ftrace: Remove obsolate maxactive syntax check tracing/fprobe: Remove nr_maxactive from fprobe fprobe: Add fprobe_header encoding feature fprobe: Rewrite fprobe on function-graph tracer s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS tracing: Add ftrace_fill_perf_regs() for perf event tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs fprobe: Use ftrace_regs in fprobe exit handler fprobe: Use ftrace_regs in fprobe entry handler fgraph: Pass ftrace_regs to retfunc fgraph: Replace fgraph_ret_regs with ftrace_regs ... |
||
|
Linus Torvalds
|
9f3ee94e70 |
RCU pull request for v6.14
This pull request contains the following branches:
fixes.2024.12.14a: Misc fixes, check if IRQs are disabled in rcu_exp_need_qs(),
instrument KCSAN exclusive-writer assertions, add extra WARN_ON_ONCE() check,
set the cpu_no_qs.b.exp under lock, warn if callback enqueued on offline CPU.
rcutorture.2024.12.14a: Torture-test updates, add rcutorture.preempt_duration kernel
module parameter, make the TREE03 scenario do preemption, improve pooling timeouts
for rcu_torture_writer(), improve output of "Failure/close-call rcutorture reader
segments", add some reader-state debugging checks, update doc of polled APIs, add
extra diagnostics for per-reader-segment preemption.
srcu.2024.12.14a: SRCU updates, improve doc for srcu_read_lock() in terms of return
value, fix typo in comments, remove redundant GP sequence checks in the
srcu_funnel_gp_start.
torture-test.2024.12.14a: Add an extra test for sched_clock(), improve testing
on unresponsive systems.
-----BEGIN PGP SIGNATURE-----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=EwPt
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Uladzislau Rezki:
"Misc fixes:
- check if IRQs are disabled in rcu_exp_need_qs()
- instrument KCSAN exclusive-writer assertions
- add extra WARN_ON_ONCE() check
- set the cpu_no_qs.b.exp under lock
- warn if callback enqueued on offline CPU
Torture-test updates:
- add rcutorture.preempt_duration kernel module parameter
- make the TREE03 scenario do preemption
- improve pooling timeouts for rcu_torture_writer()
- improve output of "Failure/close-call rcutorture reader segments"
- add some reader-state debugging checks
- update doc of polled APIs
- add extra diagnostics for per-reader-segment preemption
- add an extra test for sched_clock()
- improve testing on unresponsive systems
SRCU updates:
- improve doc for srcu_read_lock() in terms of return value
- fix typo in comments
- remove redundant GP sequence checks in the srcu_funnel_gp_start"
* tag 'rcu.release.v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
srcu: Remove redundant GP sequence checks in srcu_funnel_gp_start
srcu: Fix typo s/srcu_check_read_flavor()/__srcu_check_read_flavor()/
srcu: Guarantee non-negative return value from srcu_read_lock()
MAINTAINERS: Update RCU git tree
rcu: Add lockdep_assert_irqs_disabled() to rcu_exp_need_qs()
rcu: Add KCSAN exclusive-writer assertions for rdp->cpu_no_qs.b.exp
rcu: Make preemptible rcu_exp_handler() check idempotency
rcu: Replace open-coded rcu_exp_need_qs() from rcu_exp_handler() with call
rcu: Move rcu_report_exp_rdp() setting of ->cpu_no_qs.b.exp under lock
rcu: Make rcu_report_exp_cpu_mult() caller acquire lock
rcu: Report callbacks enqueued on offline CPU blind spot
rcutorture: Use symbols for SRCU reader flavors
rcutorture: Add per-reader-segment preemption diagnostics
rcutorture: Read CPU ID for decoration protected by both reader types
rcutorture: Add preempt_count() to rcutorture_one_extend_check() diagnostics
rcutorture: Add parameters to control polled/conditional wait interval
rcutorture: Add documentation for recent conditional and polled APIs
rcutorture: Ignore attempts to test preemption and forward progress
rcutorture: Make rcutorture_one_extend() check reader state
rcutorture: Pretty-print rcutorture reader segments
...
|
||
|
Linus Torvalds
|
336088234e |
Livepatching changes for 6.14
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmeOTvAACgkQUqAMR0iA lPKpahAAm4GqvxwQWowQmFAfdFW/1H++tADl2xCsPbmCPeKs1PBXCLTPfMDHNjWr zgHihsnJKIUQ0nUfthYrlEdYx15Ku86ucpl6p2gKBcOgpv31SG5iRbL99RnhEJ1C oeIx0XR83Imy9TnRzo0/X0MPYQAUSAEiY0oHENGBFjJpepopG61op/snacbG26AS yibEvJKOYQ3r3xPkbwp8zZ+vyblYJ7X9Tdq1/DX1Iuksz2f7sRS72XJxdjJC7QFQ 8Gyh88kbtasPmiPGOO0zRc0IMzGk0VVFa1b1zwReab7/aQKzPqAX7KQhwb4Q9JPV RuzEb3HE9v+usY1JEiW2JZijM2QXt+SYOgx0/ki7/tDKGb3c5HbVoOyhVwK2bfw7 z86/Vze3w9iLz9i2dVCmwobbZGicrBGHhejahYA8NhpGH49HRR7p5O9Nw22QgCpk ADBD2nfajDBzDTOu+s8OkQk4jPQk69LtXM9BO/nq88f5BlKOIMAY+AofPwCZj+ab KHQEDC6E+Xg03xYUGVZpek4TnpF7T9tWSc7eWGg53YQPMcgj54rR7LXzNK2dO4mP ugRC1qNUCKvjzQ5bMsCEhLhJqrszP975HSuSXIFBSzw1fNS5QNmxKepxfuCxjl08 9ZARNW3Q0mzqge7R5NeIQTcKYa/60d7cxJlWjdYHTiW5HE/xNx0= =UeIx -----END PGP SIGNATURE----- Merge tag 'livepatching-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Add a sysfs attribute showing the livepatch ordering - Some code clean up * tag 'livepatching-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests: livepatch: add test cases of stack_order sysfs interface livepatch: Add stack_order sysfs attribute selftests/livepatch: Replace hardcoded module name with variable in test-callbacks.sh |
||
|
Linus Torvalds
|
6c4aa896eb |
Performance events changes for v6.14:
- Seqlock optimizations that arose in a perf context and were
merged into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount ((Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
- Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages
in advance (Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin Cui)
- Export perf_exclude_event() (Namhyung Kim)
- Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
- AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
- AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
- Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
- Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmeOJdQRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1i2yQ/+MXl7yfJOgdbwjBpgGGzH4burEO7ppak+
ktzz+YjpNgjODe/xMAJGjjblouuYArCnRolc1UPvPm6M7jSY76wi42Y6c4dRtFoB
2ReSrRqnreLOcrRS9nsTjvWRHfJHqJDVSd9TfHX6ILfzbaizCZOGYk558ZxAKRqu
Lw7FOvLEe/Y3tg4z8dDg083jsasalKySP9wIPc0BkSqQTOfusd3KXju/Fux/9wkn
hZcUgF4ds+0bH7xtO1/G9ILqGyeq97X1McIR9bAjln5Mxykclen4hSjRaWWHHo9O
mzBKmd/blIATisfuuW+QLDQow3M1k3688cz7e9QOeWHHd/dJiMb9RLV90jdND/T/
uLINC5vNemzyWEfnNiYQ31LjhG3SeuDiKWzRp36MbQcCh6EBdRXWLBgtmxq1L/3o
ZCaCdtFu5+6epycdyOVZEpWDnjdx4GmLXMZi5WJfZ7fZ/IFjNkjk4OdzI1iRQ+i3
Sbi75ep59ayTUhm5AB7gCJsP3R7EsZsiPHUenQdA2n9Sj6xE+IuhlS/QDQ9g5mdY
Ijs0jHeVCGmhYoOD1xWnCZSzlnkEVU3zwfypAK+MC7pgtFMwDy5/Bu1USGxXXDy+
aKsrJRSgHbtZ1gwoHstqkV+DeCTfElCLYkvigzI5Nmyib5Zp4vkwy2ZLWQjaNjm7
mqRI7PugUkU=
=c8XB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
|
||
|
Linus Torvalds
|
a6640c8c2f |
Objtool changes for v6.14:
- Introduce the generic section-based annotation
infrastructure a.k.a. ASM_ANNOTATE/ANNOTATE (Peter Zijlstra)
- Convert various facilities to ASM_ANNOTATE/ANNOTATE: (Peter Zijlstra)
- ANNOTATE_NOENDBR
- ANNOTATE_RETPOLINE_SAFE
- instrumentation_{begin,end}()
- VALIDATE_UNRET_BEGIN
- ANNOTATE_IGNORE_ALTERNATIVE
- ANNOTATE_INTRA_FUNCTION_CALL
- {.UN}REACHABLE
- Optimize the annotation-sections parsing code (Peter Zijlstra)
- Centralize annotation definitions in <linux/objtool.h>
- Unify & simplify the barrier_before_unreachable()/unreachable()
definitions (Peter Zijlstra)
- Convert unreachable() calls to BUG() in x86 code, as
unreachable() has unreliable code generation (Peter Zijlstra)
- Remove annotate_reachable() and annotate_unreachable(), as it's
unreliable against compiler optimizations (Peter Zijlstra)
- Fix non-standard ANNOTATE_REACHABLE annotation order (Peter Zijlstra)
- Robustify the annotation code by warning about unknown annotation
types (Peter Zijlstra)
- Allow arch code to discover jump table size, in preparation of
annotated jump table support (Ard Biesheuvel)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmeOHiARHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gATw/7Bn4A+Isqk9bKo6QgYEnKRoyf760ALQl6
av/toEy1qCHT/CXCiEn1Hut1JEy4YyD6lIarC1scRl5xy7amRDEcCL0i2CKz3orn
pf6Fk8/Pi68G2K50o4LTiq8t3uPBJXPlGyDlngh2hFTYRfPRT4m+cig784hmJEXG
Xq2YzzUNG++U/4Uwe3JH7bX/vcZTYkZfM62FWfp3I4V0OqKU4c+Pkiv4u3Rs7L7b
c3xk5/PktKZWV5TDsz0wU4SAGxYFGV47hhYM6cxdSYD3la7RVO+qZcqxsJByjpcL
bvOmGKQ1SAXr08rV7TB+Fh8icaNE8Rbbmxf6slB0hdXBQb8STAZ810mZJFey6pnm
kXgfhhfBOK5Sq+UbTfzF2JgquCGAbKK75bmNGgf2HaLnVLkFIw3AyMsuFqnxhI4X
vXRHGnHCYpYUHTxzRYTFYR8XL8twA2kgjWkSe7hYrX/RQZV3XfyKOc2jyoJFMXeX
LecfGJCE/pziZyj60SXT9WaUTvKc8gjWOEuAnW1pJQRM0zJqB9kjLh1cDYUseuwv
gGkH59KEu0kcfOb5t/jWoqW3PTENJjEAhOmjun6Jv8wgbOxU88TMmSCWppj54O2X
c2ibO407535u1SKBWZuaKFBLYftS2GM4WaGsdyTyh+ta48C8An90HMfYNKTHM9Nz
F61Q7Zbn65E=
=9nGt
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Introduce the generic section-based annotation infrastructure a.k.a.
ASM_ANNOTATE/ANNOTATE (Peter Zijlstra)
- Convert various facilities to ASM_ANNOTATE/ANNOTATE: (Peter Zijlstra)
- ANNOTATE_NOENDBR
- ANNOTATE_RETPOLINE_SAFE
- instrumentation_{begin,end}()
- VALIDATE_UNRET_BEGIN
- ANNOTATE_IGNORE_ALTERNATIVE
- ANNOTATE_INTRA_FUNCTION_CALL
- {.UN}REACHABLE
- Optimize the annotation-sections parsing code (Peter Zijlstra)
- Centralize annotation definitions in <linux/objtool.h>
- Unify & simplify the barrier_before_unreachable()/unreachable()
definitions (Peter Zijlstra)
- Convert unreachable() calls to BUG() in x86 code, as unreachable()
has unreliable code generation (Peter Zijlstra)
- Remove annotate_reachable() and annotate_unreachable(), as it's
unreliable against compiler optimizations (Peter Zijlstra)
- Fix non-standard ANNOTATE_REACHABLE annotation order (Peter Zijlstra)
- Robustify the annotation code by warning about unknown annotation
types (Peter Zijlstra)
- Allow arch code to discover jump table size, in preparation of
annotated jump table support (Ard Biesheuvel)
* tag 'objtool-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Convert unreachable() to BUG()
objtool: Allow arch code to discover jump table size
objtool: Warn about unknown annotation types
objtool: Fix ANNOTATE_REACHABLE to be a normal annotation
objtool: Convert {.UN}REACHABLE to ANNOTATE
objtool: Remove annotate_{,un}reachable()
loongarch: Use ASM_REACHABLE
x86: Convert unreachable() to BUG()
unreachable: Unify
objtool: Collect more annotations in objtool.h
objtool: Collapse annotate sequences
objtool: Convert ANNOTATE_INTRA_FUNCTION_CALL to ANNOTATE
objtool: Convert ANNOTATE_IGNORE_ALTERNATIVE to ANNOTATE
objtool: Convert VALIDATE_UNRET_BEGIN to ANNOTATE
objtool: Convert instrumentation_{begin,end}() to ANNOTATE
objtool: Convert ANNOTATE_RETPOLINE_SAFE to ANNOTATE
objtool: Convert ANNOTATE_NOENDBR to ANNOTATE
objtool: Generic annotation infrastructure
|
||
|
Linus Torvalds
|
95ec54a420 |
powerpc updates for 6.14
- Add preempt lazy support - Deprecate cxl and cxl flash driver - Fix a possible IOMMU related OOPS at boot on pSeries - Optimize sched_clock() in ppc32 by replacing mulhdu() by mul_u64_u64_shr() Thanks to: Andrew Donnellan, Andy Shevchenko, Ankur Arora, Christophe Leroy, Frederic Barrat, Gaurav Batra, Luis Felipe Hernandez, Michael Ellerman, Nilay Shroff, Ricardo B. Marliere, Ritesh Harjani (IBM), Sebastian Andrzej Siewior, Shrikanth Hegde, Sourabh Jain, Thorsten Blum, Zhu Jun. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmePIeIACgkQpnEsdPSH ZJTLRxAAmtarhPItiCQxwi0uyQpuzBoypcVuX8M9qpAUr1cQJv1swPlJI0tFW2xV QDK37FlCytYib1oMJpwyhg5DA8kdg08OuWtvGRVxGu4O+vh2v0aehewAfPsBKBwq JTOhjSlAeDPgsYQQlK6baSlfjb4kYlAFr2mh/oJIfXi2BFV1MB7rQmCXq2sPnfKS 9cFFgsZ74fFhbYOn9qFsldnzb9TPxR0/UcTOETqRcGOjiExv4aYlmWtKGMY/nLkN k5go3xoB5WP7z11clmg0pp+RIoYKR41kR58CtGdcCEEXJJ6WBGPhPLQzT5cLBkMi ppZieQNKrZK7J/udrdKP0+2cTmBTbCpjxHicLf7BhzsWwVxHCnyjrJIzUPuLcDUi Ym9AXsmzBsqMudqnR0lslsY2mUvZOJPYh4ZCKTA5S0TDYWGy/HlAlL7sMs2uCzaM 4g8MVpEJLVo4GAoZM96x4RMcPi4RlHYXbYqNpENRkxiZu2fDoRz9WStPCdda59/D 3rQNaSDT1vBpue9ac6EIMeGgNh+f6q6WKh/PA48QBYDTp/IVbfShD+xiXtaa72cZ W+JmWUwBRyM4HOP0C5yhXBXwL6a5sHj+d6R4gng4UUww7VppJmkZpBhXZsN4VS55 Xos+2Q75FBSQkAZa84yK6dXvFW3v/upIdSXuWTkSgoKs+4Z7dG8= =ctY4 -----END PGP SIGNATURE----- Merge tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Madhavan Srinivasan: - Add preempt lazy support - Deprecate cxl and cxl flash driver - Fix a possible IOMMU related OOPS at boot on pSeries - Optimize sched_clock() in ppc32 by replacing mulhdu() by mul_u64_u64_shr() Thanks to Andrew Donnellan, Andy Shevchenko, Ankur Arora, Christophe Leroy, Frederic Barrat, Gaurav Batra, Luis Felipe Hernandez, Michael Ellerman, Nilay Shroff, Ricardo B. Marliere, Ritesh Harjani (IBM), Sebastian Andrzej Siewior, Shrikanth Hegde, Sourabh Jain, Thorsten Blum, and Zhu Jun. * tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix argument order to timer_sub() powerpc/prom_init: Use IS_ENABLED() powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW powerpc: Use str_on_off() helper in check_cache_coherency() powerpc: Large user copy aware of full:rt:lazy preemption powerpc: Add preempt lazy support powerpc/book3s64/hugetlb: Fix disabling hugetlb when fadump is active powerpc/vdso: Mark the vDSO code read-only after init powerpc/64: Use get_user() in start_thread() macintosh: declare ctl_table as const selftest/powerpc/ptrace: Cleanup duplicate macro definitions selftest/powerpc/ptrace/ptrace-pkey: Remove duplicate macros selftest/powerpc/ptrace/core-pkey: Remove duplicate macros powerpc/8xx: Drop legacy-of-mm-gpiochip.h header scsi/cxlflash: Deprecate driver cxl: Deprecate driver selftests/powerpc: Fix typo in test-vphn.c powerpc/xmon: Use str_yes_no() helper in dump_one_paca() powerpc/32: Replace mulhdu() by mul_u64_u64_shr() |
||
|
Linus Torvalds
|
9ad09c4f28 |
arm64 updates for 6.14
Confidential Computing:
* Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules.
CPU Features:
* Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation.
* Add hwcaps and selftests for the new (2024) dpISA extensions.
Documentation:
* Update EL3 (firmware) requirements for booting Linux on modern arm64
designs.
* Remove stale information about the kernel virtual memory map.
Miscellaneous:
* Minor cleanups and typo fixes.
Memory management:
* Fix vmemmap_check_pmd() to look at the PMD type bits
* LPA2 (52-bit physical addressing) cleanups and minor fixes.
* Adjust physical address space depending upon whether or not LPA2 is
enabled.
Perf and PMUs:
* Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
* Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
* Fix Designware PCIe PMU event numbering.
* Add generic branch events for the Apple M1 CPU PMU.
* Add support for Marvell Odyssey DDR and LLC-TAD PMUs.
* Cleanups to the Hisilicon DDRC and Uncore PMU code.
* Advertise discard mode for the SPE PMU.
* Add the perf users mailing list to our MAINTAINERS entry.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmeKZLcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNEQzB/0X2U89ZiqxIkTPQvfFrjN/uUGybkq59rEL
DfeoGukTgJIwc3GHWXXtQ//wuuYKdTeCXaIz5NFK3+7/wmKSLvjkexmue8pta6EY
5rx9bAPr/D8lAUvhKIN2l3pF/ygoRwDz+nT2yVQ1xlZxYJWX7ZIsMj7W7ceb5kdx
HRrTSQuhEEPREAWWO4oCMWl5SQZSrIflSE3Be/PsP0OhW6k//ZmWbcJTgUcHbKam
o2WtNjITyGzxMpRCcrGEZKoe9YcwSxiut/PoD7JuoB4C/rbsf1cdJ6uLmtvGJcZj
qsdRHhVfBzP1+ahONrDbiT3C2+s1UZySKdCDIxiYy6lB39wpP0dd
=E7Mf
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"We've got a little less than normal thanks to the holidays in
December, but there's the usual summary below. The highlight is
probably the 52-bit physical addressing (LPA2) clean-up from Ard.
Confidential Computing:
- Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules
CPU Features:
- Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation
- Add hwcaps and selftests for the new (2024) dpISA extensions
Documentation:
- Update EL3 (firmware) requirements for booting Linux on modern
arm64 designs
- Remove stale information about the kernel virtual memory map
Miscellaneous:
- Minor cleanups and typo fixes
Memory management:
- Fix vmemmap_check_pmd() to look at the PMD type bits
- LPA2 (52-bit physical addressing) cleanups and minor fixes
- Adjust physical address space depending upon whether or not LPA2 is
enabled
Perf and PMUs:
- Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
- Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
- Fix Designware PCIe PMU event numbering
- Add generic branch events for the Apple M1 CPU PMU
- Add support for Marvell Odyssey DDR and LLC-TAD PMUs
- Cleanups to the Hisilicon DDRC and Uncore PMU code
- Advertise discard mode for the SPE PMU
- Add the perf users mailing list to our MAINTAINERS entry"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
Documentation: arm64: Remove stale and redundant virtual memory diagrams
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
arm64: Remove duplicate included header
drivers/perf: apple_m1: Map generic branch events
arm64: rsi: Add automatic arm-cca-guest module loading
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
...
|
||
|
Linus Torvalds
|
fadc3ed9ce |
execve updates for v6.14-rc1
- exec: fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case (Tycho Andersen, Kees Cook) - binfmt_misc: Fix comment typos (Christophe JAILLET) - exec: move empty argv[0] warning closer to actual logic (Nir Lichtman) - exec: remove legacy custom binfmt modules autoloading (Nir Lichtman) - binfmt_flat: Fix integer overflow bug on 32 bit systems (Dan Carpenter) - exec: Make sure set_task_comm() always NUL-terminates - coredump: Do not lock when copying "comm" - MAINTAINERS: add auxvec.h and set myself as maintainer -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ4hNmQAKCRA2KwveOeQk u0/nAQCTGU0zqhdO6t7ABsL3p9kJ2jVRA5njAoX7A/9jGPSWEQD/boRMqZuUpthV nMevcQ2F4u0A7kJJBMK05YdXWHkYqgk= =49Di -----END PGP SIGNATURE----- Merge tag 'execve-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case (Tycho Andersen, Kees Cook) - binfmt_misc: Fix comment typos (Christophe JAILLET) - move empty argv[0] warning closer to actual logic (Nir Lichtman) - remove legacy custom binfmt modules autoloading (Nir Lichtman) - Make sure set_task_comm() always NUL-terminates - binfmt_flat: Fix integer overflow bug on 32 bit systems (Dan Carpenter) - coredump: Do not lock when copying "comm" - MAINTAINERS: add auxvec.h and set myself as maintainer * tag 'execve-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_flat: Fix integer overflow bug on 32 bit systems selftests/exec: add a test for execveat()'s comm exec: fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case exec: Make sure task->comm is always NUL-terminated exec: remove legacy custom binfmt modules autoloading exec: move warning of null argv to be next to the relevant code fs: binfmt: Fix a typo MAINTAINERS: exec: Mark Kees as maintainer MAINTAINERS: exec: Add auxvec.h UAPI coredump: Do not lock during 'comm' reporting |
||
Rafael J. Wysocki
|
1c91c99075 |
Merge branch 'pm-tools'
Merge cpupower utility updates for 6.14: - Fix TSC MHz calculation in cpupower (He Rongguang). - Add install and uninstall options to bindings Makefile and add header changes for cpufreq.h to SWIG bindings in cpupower (John B. Wyatt IV). - Add missing residency header changes in cpuidle.h to SWIG bindings in cpupower (John B. Wyatt IV). - Add output files to .gitignore and clean them up in "make clean" in selftests/cpufreq (Li Zhijian). - Fix cross-compilation in cpupower Makefile (Peng Fan). - Revise the is_valid flag handling for idle_monitor in the cpupower utility (wangfushuai). - Extend and clean up AMD processors support in cpupower (Mario Limonciello). * pm-tools: pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG pm: cpupower: Add header changes for cpufreq.h to SWIG bindings pm: cpupower: Add install and uninstall options to bindings makefile cpupower: Adjust whitespace for amd-pstate specific prints cpupower: Don't fetch maximum latency when EPP is enabled cpupower: Add support for showing energy performance preference cpupower: Don't try to read frequency from hardware when kernel uses aperfmperf cpupower: Add support for amd-pstate preferred core rankings cpupower: Add support for parsing 'enabled' or 'disabled' strings from table cpupower: Remove spurious return statement cpupower: fix TSC MHz calculation cpupower: revise is_valid flag handling for idle_monitor pm: cpupower: Makefile: Fix cross compilation selftests/cpufreq: gitignore output files and clean them in make clean |