Commit graph

25,944 commits

Author SHA1 Message Date
Arnd Bergmann
c39a9a02bc scsi: megaraid_mbox: Avoid double kfree()
Smatch found a double-free after my recent change:

	drivers/scsi/megaraid/megaraid_mbox.c:3474 megaraid_cmm_register()
	error: double free of 'adp' (line 3468)

Since the object is no longer allocated in megaraid_cmm_register(),
remove the kfree() as well.

Fixes: c1f7275b61 ("scsi: megaraid_mbox: Reduce stack usage in megaraid_cmm_register()")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260601210216.846809-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-06-01 21:55:19 -04:00
Dan Carpenter
1b6f03b7ae scsi: pm8001: Fix error code in non_fatal_log_show()
The non_fatal_log_show() function is supposed to return negative error
codes on failure.  But because the error codes are saved in a u32 and
then cast to signed long, they end up being high positive values instead
of negative.  Remove the intermediary u32 variable to fix this bug.

Fixes: dba2cc03b9 ("scsi: pm80xx: sysfs attribute for non fatal dump")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://patch.msgid.link/ahs-bEsBJH0KhnsX@stanley.mountain
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-06-01 21:52:12 -04:00
Rosen Penev
056fca1f27 scsi: lpfc: Turn lpfc_queue q_pgs into a flexible array
The q_pgs pointer was assigned to point at the trailing memory allocated
past the struct. Convert it to a proper C99 flexible array member and
use struct_size() for the allocation.

Assisted-by: Claude:Opus-4.7
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260523050241.190239-1-rosenp@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-06-01 21:46:50 -04:00
Ionut Nechita
be8fcd4a82 scsi: sas: Skip opt_sectors when DMA reports no real optimization hint
sas_host_setup() unconditionally sets shost->opt_sectors from
dma_opt_mapping_size().

When the IOMMU is disabled or in passthrough mode and no DMA ops provide
an opt_mapping_size callback, dma_opt_mapping_size() returns
min(dma_max_mapping_size(), SIZE_MAX) which equals
dma_max_mapping_size() — a hard upper bound, not an optimization hint.

On a Dell PowerEdge R750 with mpt3sas (Broadcom SAS3816, FW 33.15.00.00)
and intel_iommu=off the following values are observed:

  dma_opt_mapping_size()  = dma_max_mapping_size() (no real hint)
  shost->max_sectors      = 32767
  opt_sectors             = min(32767, huge >> 9) = 32767
  optimal_io_size         = 32767 << 9 = 16776704
                          → round_down(16776704, 4096) = 16773120

The SAS disk (SAMSUNG MZILT800HBHQ0D3) does not report an Optimal
Transfer Length in VPD page B0, so sdkp->opt_xfer_blocks remains 0.

sd_revalidate_disk() then uses min_not_zero(0, opt_sectors) =
opt_sectors, propagating the bogus value into the block device's
optimal_io_size (visible as OPT-IO = 16773120 in lsblk --topology).

mkfs.xfs picks up optimal_io_size and minimum_io_size and computes:

  swidth = 16773120 / 4096 = 4095
  sunit  = 8192 / 4096     = 2

Since 4095 % 2 != 0, XFS rejects the geometry:

  SB stripe unit sanity check failed

This makes it impossible to create XFS filesystems (e.g. for
/var/lib/docker) during system bootstrap.

Fix this by introducing a sas_dma_setup_opt_sectors() helper that sets
opt_sectors only when dma_opt_mapping_size() is strictly less than
dma_max_mapping_size(), indicating a genuine DMA optimization
constraint.

The helper computes min(opt_sectors, max_sectors) first, then rounds
down to a power of two so that filesystem geometry calculations always
produce clean results.

When the two DMA values are equal, no backend provided a real hint, so
opt_sectors stays at 0 ("no preference").

[mkp: implemented hch's suggestion]

Fixes: 4cbfca5f77 ("scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ionut Nechita <ionut.nechita@windriver.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260519135238.373784-2-ionut.nechita@windriver.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-06-01 21:42:09 -04:00
Martin Wilck
8c292e89bd scsi: Revert "scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans"
This reverts commit 37c4e72b06.

Said commit causes excessive resource usage and even system freeze with
some controllers, e.g. smartpqi and hisi_sas. The justification provided
by the patch authors [1] was supporting a special mode of the mpi3mr and
mpt3sas, so-called "Tri-mode", in which NVMe drives are exposed as SCSI
devices on a separate channel. While that's useful for these drivers, it
seems wrong to cause major breakage for other drivers for the sake of
this feature.

[1] https://lore.kernel.org/linux-scsi/CAFdVvOwjy+2ORJ6uJkspiLTPF05481U7gcS4QohFOFGPqAs8ig@mail.gmail.com/

Fixes: 37c4e72b06 ("scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans")
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Cc: Don Brace <don.brace@microchip.com>
Cc: storagedev@microchip.com
Cc: Ranjan Kumar <ranjan.kumar@broadcom.com>
Cc: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: mpi3mr-linuxdrv.pdl@broadcom.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: Yihang Li <liyihang9@h-partners.c>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260513174236.430465-3-mwilck@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-06-01 21:22:53 -04:00
Martin Wilck
57db1307af scsi: smartpqi: Use shost_to_hba() in pqi_scan_finished()
shost_to_hba() is used everywhere except to obtain pqi_ctrl_info from
shosti, except in pqi_scan_finished(), where shost_priv() is used.  This
causes one pointer dereference to be missed, as shost->hostdata is a
pointer in smartpqi. Fix it.

Fixes: 6c223761eb ("smartpqi: initial commit of Microsemi smartpqi driver")
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Reviewed-by: Don Brace <don.brace@microchip.com>
Cc: Don Brace <don.brace@microchip.com>
Cc: storagedev@microchip.com
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260513174236.430465-2-mwilck@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-06-01 21:22:53 -04:00
Bart Van Assche
20fd1648f3 scsi: core: Convert INQUIRY information
Currently the vendor, model, and revision members of struct scsi_device
are pointers to fixed-length strings that are not NUL-terminated.
Fixed-precision format specifiers (e.g., "%.8s") are required whenever
they are printed and strncmp() must be used to compare these fields.
This is error-prone.

Convert these fields to fixed-size character arrays within struct
scsi_device. Remove an !sdev->model check because sdev->model is now
guaranteed not to be NULL.

This patch fixes a bug in the qla2xxx driver. It makes the following
code safe:

		if (state_flags & BIT_4)
			scmd_printk(KERN_WARNING, cp,
			    "Unsupported device '%s' found.\n",
			    cp->device->vendor);

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Brian Bunker <brian@purestorage.com>
Link: https://patch.msgid.link/20260515205222.1754621-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-22 21:49:05 -04:00
Bart Van Assche
28ff38b9d8 scsi: core: Use the INQUIRY-related constants
Use symbolic names instead of numeric constants to access the vendor and
model information.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Brian Bunker <brian@purestorage.com>
Link: https://patch.msgid.link/20260515205222.1754621-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-22 21:49:05 -04:00
Arnd Bergmann
c1f7275b61 scsi: megaraid_mbox: Reduce stack usage in megaraid_cmm_register()
The megaraid_cmm_register() function has a local copy of mraid_mmadp_t
on the stack that gets copied into the actual structure used at
runtime. When -fsanitize=thread is enabled, this causes the per-function
stack frame to grow beyond the warning limit:

megaraid_mbox.c: In function 'megaraid_cmm_register':
megaraid_mbox.c:3472:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]

Refactor this by moving the allocation into the caller to save the extra
on-stack copy of the structure.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260519202143.1305850-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-22 21:37:59 -04:00
Bart Van Assche
f199cee401 scsi: scsi_debug: Remove unused variable sdebug_any_injecting_opt
The static variable sdebug_any_injecting_opt is no longer read. Commit
3a90a63d02 ("scsi: scsi_debug: every_nth triggered error injection")
removed all code that reads this variable. Hence, also remove this
variable itself. Remove SDEBUG_OPT_ALL_INJECTING because there is no
code left that uses this constant if sdebug_any_injecting_opt is
removed. This has been detected by building the scsi_debug driver with
the git HEAD version of Clang and with W=1.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260520171454.4035623-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-22 21:31:41 -04:00
Thorsten Blum
09be9d404f scsi: scsi_ioctl: Use strnlen() in scsi_ioctl_get_pci()
Use strnlen() to limit string scanning to 20 characters.

Reformat the code and use tabs instead of spaces while at it.

[mkp: tweaked comment formatting]

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260517171546.2304-2-thorsten.blum@linux.dev
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-22 21:12:32 -04:00
Piotr Zarycki
016d484531 scsi: isci: Remove unused macro scu_get_command_request_logical_port()
The macro scu_get_command_request_logical_port() has never been used
since it was introduced.

Signed-off-by: Piotr Zarycki <piotr.zarycki@gmail.com>
Link: https://patch.msgid.link/20260423081343.1813002-1-piotr.zarycki@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 22:25:20 -04:00
Kumar Meiyappan
aa3b8f56ef scsi: pm8001: Reject non-fatal dump when controller is crashed
pm80xx_get_non_fatal_dump() can be called even after the controller has
entered a fatal error state. In that case the forensic memory contents
are not safe to access for a non-fatal dump request, and attempting to
do so can trigger a call trace.

Check controller_fatal_error before reading the non-fatal dump buffer
and return -EINVAL when the controller is already in a crashed state.

This prevents non-fatal dump collection from running in an invalid
controller state.

Signed-off-by: Kumar Meiyappan <kumar.meiyappan@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Link: https://patch.msgid.link/20260416154650.415624-1-sagar.biradar@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 22:10:23 -04:00
Kumar Meiyappan
2a8fbcfb04 scsi: pm8001: Reject firmware update in fatal error state
pm8001_store_update_fw() allows a firmware update request even when the
controller has already entered a fatal error state.

Firmware update is not valid once the controller is in that state, and
attempting it can lead to a call trace. Reject the request early by
checking controller_fatal_error, set the firmware status to
FAIL_PARAMETERS, and return -EINVAL.

Signed-off-by: Kumar Meiyappan <kumar.meiyappan@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Link: https://patch.msgid.link/20260416153757.414896-1-sagar.biradar@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 22:09:30 -04:00
Yihang Li
67b85a8826 scsi: hisi_sas: Add slave_destroy interface for v3 hw
WARNING is triggered when executing link reset of remote PHY and rmmod
SAS driver simultaneously. Following is the WARNING log:

WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0
 Call trace:
  __device_links_no_driver+0xb4/0xc0
  device_links_driver_cleanup+0xb0/0xfc
  __device_release_driver+0x198/0x23c
  device_release_driver+0x38/0x50
  bus_remove_device+0x130/0x140
  device_del+0x184/0x434
  __scsi_remove_device+0x118/0x150
  scsi_remove_target+0x1bc/0x240
  sas_rphy_remove+0x90/0x94
  sas_rphy_delete+0x24/0x3c
  sas_destruct_devices+0x64/0xa0 [libsas]
  sas_revalidate_domain+0xe4/0x150 [libsas]
  process_one_work+0x1e0/0x46c
  worker_thread+0x15c/0x464
  kthread+0x160/0x170
  ret_from_fork+0x10/0x20
 ---[ end trace 71e059eb58f85d4a ]---

During SAS phy up, link->status is set to DL_STATE_AVAILABLE in
device_links_driver_bound, then this setting influences
__device_links_no_driver() before driver rmmod and caused WARNING.

Add the slave_destroy interface to make sure link is removed after flush
workque.

Fixes: 16fd4a7c59 ("scsi: hisi_sas: Add device link between SCSI devices and hisi_hba")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://patch.msgid.link/20260425082056.2749910-1-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 22:07:50 -04:00
Uwe Kleine-König (The Capable Hub)
2cc8a6cf8a scsi: mvsas: Don't emit __LINE__ in debug messages
__LINE__ changes quite easily for cleanup commits. So when checking if a
cleanup patch introduces changes to the resulting binary each usage of
__LINE__ is source of annoyance.

So instead of __FILE__ and __LINE__ emit __func__ to give at least some
more indication about where the messages originates from than __FILE__
alone; with that and the actual message the situation should be clear
enough.

While at it reduce duplication by implementing mv_dprintk() using
mv_printk().

Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260427174545.2014499-2-u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 22:04:50 -04:00
Wang Yan
250ba648f4 scsi: libiscsi: Fix spelling and format errors
Fix two issues in libiscsi.c:

 - Correct typo "numer" to "number" in iscsi_session_setup() comment

 - Fix format string "seconds\n." to "seconds.\n" in recv timeout
   warning

Signed-off-by: Wang Yan <wangyan01@kylinos.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Link: https://patch.msgid.link/20260511093030.63542-1-wangyan01@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 22:01:20 -04:00
Marco Crivellari
1039939c52 scsi: scsi_transport_srp: Move long delayed work to system_dfl_long_wq
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.

The function(s) end up calling __queue_delayed_work(), which set a
global timer that could fire anywhere, enqueuing the work where the
timer fired.

Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.

Recently, a new unbound workqueue specific for long running work has
been added:

    c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")

Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.

Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260507143410.337267-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 21:57:28 -04:00
Md Shofiqul Islam
7332207141 scsi: storvsc: Replace symbolic permissions with octal
Symbolic permissions like S_IRUGO and S_IWUSR are not preferred by
checkpatch. Replace with their octal equivalents:

  - S_IRUGO|S_IWUSR -> 0644
  - S_IRUGO         -> 0444

Signed-off-by: Md Shofiqul Islam <shofiqtest@gmail.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260506004948.2172-1-shofiqtest@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 21:44:30 -04:00
Md Shofiqul Islam
036218473a scsi: core: scsi_scan: Fix typo in comment
Fix spelling mistake in comment:

 - initialze -> initialize

Signed-off-by: Md Shofiqul Islam <shofiqtest@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260506094504.2235-1-shofiqtest@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 21:42:23 -04:00
Evgenii Burenchev
195254aded scsi: snic: vnic_dev: Remove dead store in vnic_dev_discover_res()
The assignment 'len = count' for RES_TYPE_INTR_PBA_LEGACY,
RES_TYPE_DEVCMD, and RES_TYPE_DEVCMD2 cases is never used.

Drop the unused assignments to fix the following static analyzer
warning.

No functional change.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Evgenii Burenchev <evg28bur@yandex.ru>
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Link: https://patch.msgid.link/20260429095212.11251-1-evg28bur@yandex.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-05-14 21:33:17 -04:00
Sasha Levin
7787588db9 scsi: ncr53c8xx: Drop CONFIG_ prefix from Zalon-specific compiler defines
kconfiglint reports:

  X001: CONFIG_NCR53C8XX_PREFETCH referenced in Makefile but not
        defined in any Kconfig
  X001: CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS referenced in Makefile
        but not defined in any Kconfig

The ncr53c8xx SCSI driver uses two preprocessor defines that carry the
CONFIG_ prefix but are not defined in any Kconfig file:

  -DCONFIG_NCR53C8XX_PREFETCH
  -DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS

These are hardcoded compiler flags in drivers/scsi/Makefile, passed only
when CONFIG_SCSI_ZALON is enabled:

  ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
      := -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
          -DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS

The source files ncr53c8xx.c and ncr53c8xx.h check these defines with
#ifdef to enable script prefetching and disable 16-bit word transfers
respectively — both specific to the PA-RISC Zalon SCSI controller's
big-endian bus requirements.

These defines have been present since the initial git import in commit
1da177e4c3 ("Linux-2.6.12-rc2"). They predate the modern Kconfig
convention that CONFIG_ prefixed symbols should always originate from
Kconfig. The third define on the same line, SCSI_NCR_BIG_ENDIAN, already
correctly omits the CONFIG_ prefix.

The CONFIG_ prefix is misleading: these are not user-configurable
options and do not appear in any Kconfig menu. They are unconditionally
enabled for all Zalon builds. Remove the CONFIG_ prefix from both
symbols — renaming them to NCR53C8XX_PREFETCH and
SCSI_NCR53C8XX_NO_WORD_TRANSFERS — to match the convention used by
SCSI_NCR_BIG_ENDIAN on the same line and to avoid confusion with actual
Kconfig-managed symbols.

No functional change.

Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://patch.msgid.link/20260426000330.56137-1-sashal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-30 11:56:20 -04:00
Arnd Bergmann
c7233b3d99 scsi: advansys: Drop ISA_DMA_API remnants
Support for ISA bus mastering was removed a few years ago, and the VLB
mode does not use the ISA DMA API, so drop the dependency and the header
inclusion.

Fixes: 9b4c8eaa68 ("advansys: remove ISA support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://patch.msgid.link/20260429151623.3899875-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-30 11:22:58 -04:00
Linus Torvalds
a85d6ff994 SCSI misc on 20260421
Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).  The
 substantive core changes are adding a 'serial' sysfs attribute and
 getting sd to support > PAGE_SIZE sectors.
 
 Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 
 iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaeeTSRsUgAAAAAAEAA5t
 YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
 c2hpcC5jb20ACgkQ50LJTO6YrIXxbAEA+LYW6sZ4JHAKRAlU1kPxlPFP18eBjcHa
 HqWm8/sllyoBAIBt6ldCACW8sP0bLCDTpLz21XZqJGHm7bvR8xkyca0Q
 =oglt
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).

  The substantive core changes are adding a 'serial' sysfs attribute and
  getting sd to support > PAGE_SIZE sectors"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
  scsi: target: Don't validate ignored fields in PROUT PREEMPT
  scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
  scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
  scsi: mpi3mr: Fix typo
  scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
  scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
  scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
  scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
  scsi: lpfc: Update lpfc version to 15.0.0.0
  scsi: lpfc: Add PCI ID support for LPe42100 series adapters
  scsi: lpfc: Introduce 128G link speed selection and support
  scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
  scsi: lpfc: Update construction of SGL when XPSGL is enabled
  scsi: lpfc: Remove deprecated PBDE feature
  scsi: lpfc: Add REG_VFI mailbox cmd error handling
  scsi: lpfc: Log MCQE contents for mbox commands with no context
  scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
  scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
  scsi: ufs: core: Make the header files self-contained
  scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
  ...
2026-04-21 08:22:18 -07:00
Linus Torvalds
91a4855d6c Networking changes for 7.1.
Core & protocols
 ----------------
 
  - Support HW queue leasing, allowing containers to be granted access
    to HW queues for zero-copy operations and AF_XDP.
 
  - Number of code moves to help the compiler with inlining.
    Avoid output arguments for returning drop reason where possible.
 
  - Rework drop handling within qdiscs to include more metadata
    about the reason and dropping qdisc in the tracepoints.
 
  - Remove the rtnl_lock use from IP Multicast Routing.
 
  - Pack size information into the Rx Flow Steering table pointer
    itself. This allows making the table itself a flat array of u32s,
    thus making the table allocation size a power of two.
 
  - Report TCP delayed ack timer information via socket diag.
 
  - Add ip_local_port_step_width sysctl to allow distributing the randomly
    selected ports more evenly throughout the allowed space.
 
  - Add support for per-route tunsrc in IPv6 segment routing.
 
  - Start work of switching sockopt handling to iov_iter.
 
  - Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
    buffer size drifting up.
 
  - Support MSG_EOR in MPTCP.
 
  - Add stp_mode attribute to the bridge driver for STP mode selection.
    This addresses concerns about call_usermodehelper() usage.
 
  - Remove UDP-Lite support (as announced in 2023).
 
  - Remove support for building IPv6 as a module.
    Remove the now unnecessary function calling indirection.
 
 Cross-tree stuff
 ----------------
 
  - Move Michael MIC code from generic crypto into wireless,
    it's considered insecure but some WiFi networks still need it.
 
 Netfilter
 ---------
 
  - Switch nft_fib_ipv6 module to no longer need temporary dst_entry
    object allocations by using fib6_lookup() + RCU.
    Florian W reports this gets us ~13% higher packet rate.
 
  - Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
    switch the service tables to be per-net. Convert some code that
    walks the service lists to use RCU instead of the service_mutex.
 
  - Add more opinionated input validation to lower security exposure.
 
  - Make IPVS hash tables to be per-netns and resizable.
 
 Wireless
 --------
 
  - Finished assoc frame encryption/EPPKE/802.1X-over-auth.
 
  - Radar detection improvements.
 
  - Add 6 GHz incumbent signal detection APIs.
 
  - Multi-link support for FILS, probe response templates and
    client probing.
 
  - New APIs and mac80211 support for NAN (Neighbor Aware Networking,
    aka Wi-Fi Aware) so less work must be in firmware.
 
 Driver API
 ----------
 
  - Add numerical ID for devlink instances (to avoid having to create
    fake bus/device pairs just to have an ID). Support shared devlink
    instances which span multiple PFs.
 
  - Add standard counters for reporting pause storm events
    (implement in mlx5 and fbnic).
 
  - Add configuration API for completion writeback buffering
    (implement in mana).
 
  - Support driver-initiated change of RSS context sizes.
 
  - Support DPLL monitoring input frequency (implement in zl3073x).
 
  - Support per-port resources in devlink (implement in mlx5).
 
 Misc
 ----
 
  - Expand the YAML spec for Netfilter.
 
 Drivers
 -------
 
  - Software:
    - macvlan: support multicast rx for bridge ports with shared source
      MAC address
    - team: decouple receive and transmit enablement for IEEE 802.3ad
      LACP "independent control"
 
  - Ethernet high-speed NICs:
    - nVidia/Mellanox:
      - support high order pages in zero-copy mode (for payload
        coalescing)
      - support multiple packets in a page (for systems with 64kB pages)
    - Broadcom 25-400GE (bnxt):
      - implement XDP RSS hash metadata extraction
      - add software fallback for UDP GSO, lowering the IOMMU cost
    - Broadcom 800GE (bnge):
      - add link status and configuration handling
      - add various HW and SW statistics
    - Marvell/Cavium:
      - NPC HW block support for cn20k
    - Huawei (hinic3):
      - add mailbox / control queue
      - add rx VLAN offload
      - add driver info and link management
 
  - Ethernet NICs:
    - Marvell/Aquantia:
      - support reading SFP module info on some AQC100 cards
    - Realtek PCI (r8169):
      - add support for RTL8125cp
    - Realtek USB (r8152):
      - support for the RTL8157 5Gbit chip
      - add 2500baseT EEE status/configuration support
 
  - Ethernet NICs embedded and off-the-shelf IP:
    - Synopsys (stmmac):
      - cleanup and reorganize SerDes handling and PCS support
      - cleanup descriptor handling and per-platform data
      - cleanup and consolidate MDIO defines and handling
      - shrink driver memory use for internal structures
      - improve Tx IRQ coalescing
      - improve TCP segmentation handling
      - add support for Spacemit K3
    - Cadence (macb):
      - support PHYs that have inband autoneg disabled with GEM
      - support IEEE 802.3az EEE
      - rework usrio capabilities and handling
    - AMD (xgbe):
      - improve power management for S0i3
      - improve TX resilience for link-down handling
 
  - Virtual:
    - Google cloud vNIC:
      - support larger ring sizes in DQO-QPL mode
      - improve HW-GRO handling
      - support UDP GSO for DQO format
    - PCIe NTB:
      - support queue count configuration
 
  - Ethernet PHYs:
    - automatically disable PHY autonomous EEE if MAC is in charge
    - Broadcom:
      - add BCM84891/BCM84892 support
    - Micrel:
      - support for LAN9645X internal PHY
    - Realtek:
      - add RTL8224 pair order support
      - support PHY LEDs on RTL8211F-VD
      - support spread spectrum clocking (SSC)
    - Maxlinear:
      - add PHY-level statistics via ethtool
 
  - Ethernet switches:
    - Maxlinear (mxl862xx):
      - support for bridge offloading
      - support for VLANs
      - support driver statistics
 
  - Bluetooth:
    - large number of fixes and new device IDs
    - Mediatek:
      - support MT6639 (MT7927)
      - support MT7902 SDIO
 
  - WiFi:
    - Intel (iwlwifi):
      - UNII-9 and continuing UHR work
    - MediaTek (mt76):
      - mt7996/mt7925 MLO fixes/improvements
      - mt7996 NPU support (HW eth/wifi traffic offload)
    - Qualcomm (ath12k):
      - monitor mode support on IPQ5332
      - basic hwmon temperature reporting
      - support IPQ5424
    - Realtek:
      - add USB RX aggregation to improve performance
      - add USB TX flow control by tracking in-flight URBs
 
  - Cellular:
    - IPA v5.2 support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmnelNoACgkQMUZtbf5S
 IrtWFw//WyiXuEiGawVQONnbu1dtR+3nw/cvNpSYi0IM66vbRUB9n+9fxm2MIyG4
 4jI/c/X/fxIvUxEqGez3yPn5P7KqkQR8WRYwkxrMYKRpXeukN0IDk5Euew5DskCe
 wtBKNJOQWKdKXff0bLQoJ9dHWYuJ2IMRVil5M3fhUbeUOXeyJD7Yn1w2ICvJAbj+
 T/Hw7sEtchNaHp6h6SbaQfahkUFHQG5peNoETkZF4UDF6ALGY29WH91GXeO2lrgN
 IxX203KtaavV0oU8T0oixZgOc57Ns081YfFL/F1JP2HV6lgkwhuq+zxCrRTi1c9M
 HPTXgwD7Z80Y74nM3YTLrPfoMOP8GLBZgdV3rUpwmteM26+gMTm+O1zHUur5ZoGy
 D6TaMFguPTIqiRyrARa9xY/J6r9TQkc2Wfu4bIuPndKFg8xPoepuEObODnh0+5Hg
 4j4pdFhIo2huENhSg7kVb/yl+1q68SFwM3RqTmx+OhCa0AyjcKIKgt/UBhismdnG
 r8obxzb+nXeJc2rRDuwNMwlBlcMSbep27uGt64zeHMMXVhTVqOoytNaL/X/ZpH2m
 A0DscUrpHvb36IoDPtanc6irP+JOh5Xe7Nw5qhkgwsMc7hlf8SyyHB4OUBBaz1qA
 ETSnHlfwklRmXSpWqH2LyGXjdOQpDKP46+h0W3dttMD2/cRBqYo=
 =EhQZ
 -----END PGP SIGNATURE-----

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support HW queue leasing, allowing containers to be granted access
     to HW queues for zero-copy operations and AF_XDP

   - Number of code moves to help the compiler with inlining. Avoid
     output arguments for returning drop reason where possible

   - Rework drop handling within qdiscs to include more metadata about
     the reason and dropping qdisc in the tracepoints

   - Remove the rtnl_lock use from IP Multicast Routing

   - Pack size information into the Rx Flow Steering table pointer
     itself. This allows making the table itself a flat array of u32s,
     thus making the table allocation size a power of two

   - Report TCP delayed ack timer information via socket diag

   - Add ip_local_port_step_width sysctl to allow distributing the
     randomly selected ports more evenly throughout the allowed space

   - Add support for per-route tunsrc in IPv6 segment routing

   - Start work of switching sockopt handling to iov_iter

   - Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
     buffer size drifting up

   - Support MSG_EOR in MPTCP

   - Add stp_mode attribute to the bridge driver for STP mode selection.
     This addresses concerns about call_usermodehelper() usage

   - Remove UDP-Lite support (as announced in 2023)

   - Remove support for building IPv6 as a module. Remove the now
     unnecessary function calling indirection

  Cross-tree stuff:

   - Move Michael MIC code from generic crypto into wireless, it's
     considered insecure but some WiFi networks still need it

  Netfilter:

   - Switch nft_fib_ipv6 module to no longer need temporary dst_entry
     object allocations by using fib6_lookup() + RCU.

     Florian W reports this gets us ~13% higher packet rate

   - Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
     switch the service tables to be per-net. Convert some code that
     walks the service lists to use RCU instead of the service_mutex

   - Add more opinionated input validation to lower security exposure

   - Make IPVS hash tables to be per-netns and resizable

  Wireless:

   - Finished assoc frame encryption/EPPKE/802.1X-over-auth

   - Radar detection improvements

   - Add 6 GHz incumbent signal detection APIs

   - Multi-link support for FILS, probe response templates and client
     probing

   - New APIs and mac80211 support for NAN (Neighbor Aware Networking,
     aka Wi-Fi Aware) so less work must be in firmware

  Driver API:

   - Add numerical ID for devlink instances (to avoid having to create
     fake bus/device pairs just to have an ID). Support shared devlink
     instances which span multiple PFs

   - Add standard counters for reporting pause storm events (implement
     in mlx5 and fbnic)

   - Add configuration API for completion writeback buffering (implement
     in mana)

   - Support driver-initiated change of RSS context sizes

   - Support DPLL monitoring input frequency (implement in zl3073x)

   - Support per-port resources in devlink (implement in mlx5)

  Misc:

   - Expand the YAML spec for Netfilter

  Drivers

   - Software:
      - macvlan: support multicast rx for bridge ports with shared
        source MAC address
      - team: decouple receive and transmit enablement for IEEE 802.3ad
        LACP "independent control"

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - support high order pages in zero-copy mode (for payload
           coalescing)
         - support multiple packets in a page (for systems with 64kB
           pages)
      - Broadcom 25-400GE (bnxt):
         - implement XDP RSS hash metadata extraction
         - add software fallback for UDP GSO, lowering the IOMMU cost
      - Broadcom 800GE (bnge):
         - add link status and configuration handling
         - add various HW and SW statistics
      - Marvell/Cavium:
         - NPC HW block support for cn20k
      - Huawei (hinic3):
         - add mailbox / control queue
         - add rx VLAN offload
         - add driver info and link management

   - Ethernet NICs:
      - Marvell/Aquantia:
         - support reading SFP module info on some AQC100 cards
      - Realtek PCI (r8169):
         - add support for RTL8125cp
      - Realtek USB (r8152):
         - support for the RTL8157 5Gbit chip
         - add 2500baseT EEE status/configuration support

   - Ethernet NICs embedded and off-the-shelf IP:
      - Synopsys (stmmac):
         - cleanup and reorganize SerDes handling and PCS support
         - cleanup descriptor handling and per-platform data
         - cleanup and consolidate MDIO defines and handling
         - shrink driver memory use for internal structures
         - improve Tx IRQ coalescing
         - improve TCP segmentation handling
         - add support for Spacemit K3
      - Cadence (macb):
         - support PHYs that have inband autoneg disabled with GEM
         - support IEEE 802.3az EEE
         - rework usrio capabilities and handling
      - AMD (xgbe):
         - improve power management for S0i3
         - improve TX resilience for link-down handling

   - Virtual:
      - Google cloud vNIC:
         - support larger ring sizes in DQO-QPL mode
         - improve HW-GRO handling
         - support UDP GSO for DQO format
      - PCIe NTB:
         - support queue count configuration

   - Ethernet PHYs:
      - automatically disable PHY autonomous EEE if MAC is in charge
      - Broadcom:
         - add BCM84891/BCM84892 support
      - Micrel:
         - support for LAN9645X internal PHY
      - Realtek:
         - add RTL8224 pair order support
         - support PHY LEDs on RTL8211F-VD
         - support spread spectrum clocking (SSC)
      - Maxlinear:
         - add PHY-level statistics via ethtool

   - Ethernet switches:
      - Maxlinear (mxl862xx):
         - support for bridge offloading
         - support for VLANs
         - support driver statistics

   - Bluetooth:
      - large number of fixes and new device IDs
      - Mediatek:
         - support MT6639 (MT7927)
         - support MT7902 SDIO

   - WiFi:
      - Intel (iwlwifi):
         - UNII-9 and continuing UHR work
      - MediaTek (mt76):
         - mt7996/mt7925 MLO fixes/improvements
         - mt7996 NPU support (HW eth/wifi traffic offload)
      - Qualcomm (ath12k):
         - monitor mode support on IPQ5332
         - basic hwmon temperature reporting
         - support IPQ5424
      - Realtek:
         - add USB RX aggregation to improve performance
         - add USB TX flow control by tracking in-flight URBs

   - Cellular:
      - IPA v5.2 support"

* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
  net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
  wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
  wireguard: allowedips: remove redundant space
  tools: ynl: add sample for wireguard
  wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
  MAINTAINERS: Add netkit selftest files
  selftests/net: Add additional test coverage in nk_qlease
  selftests/net: Split netdevsim tests from HW tests in nk_qlease
  tools/ynl: Make YnlFamily closeable as a context manager
  net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
  net: airoha: Fix VIP configuration for AN7583 SoC
  net: caif: clear client service pointer on teardown
  net: strparser: fix skb_head leak in strp_abort_strp()
  net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
  selftests/bpf: add test for xdp_master_redirect with bond not up
  net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
  net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
  sctp: disable BH before calling udp_tunnel_xmit_skb()
  sctp: fix missing encap_port propagation for GSO fragments
  net: airoha: Rely on net_device pointer in ETS callbacks
  ...
2026-04-14 18:36:10 -07:00
Linus Torvalds
7fe6ac157b for-7.1/block-20260411
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmna0tgQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgptEbD/0ZMEsz5pcN+/bpM9Qva5lVVkByRieua+JA
 T7L+JMcEigp1Hf2idAPlv1e9dbrtgOGhkjZNlbZenP2MHXBmbUTnzTWDKW5w0ZQ4
 UqnVC7fMmxzI57DPt7iG/1WQo8O6QPHWwBof5ZXn0b83qwByTB2oVkAb9ysT7CdM
 wGk5KnPRLIAWf5o+aZ4LoWE+196jQiszx1m6U58FTqnCgvJ/GyKyrgzx+uvGUgF+
 owZT/6TrN7cN9A68fOnmcjEZ7beZXygOQPTn32sF9rEOi8JsgK71EE2LofdVVSNU
 ES/tyKVJbSNDgUH2b0T84rErT4MtZcw5J29V3k7CVndC+DcT2uLSroPz3lYQjDg9
 TLeq7ZLjnyoBG+muboWdXcvBKn3aKLec3nfVSbz6J1xb/Z22gWYy5TZbrGnGH8fJ
 zBiyKkHMaZi55IdTDWQT3a48h36qFh0Y2wbvZ6uhyYOfXHyj4pA4ccJZgFfmf4ZG
 flVRFGEL9Tqc82lB8dfy9DBp0ZQSjeBUCd+gyDKjiuWVau5L5iTUeMMkt8yr7qbg
 PY+ATJcHk5S5zwM2xcZUt5EcHBBbCaKQ6DdRZKwzMMUvCjHlvnWvENVjUtRa9Dng
 1vUKpB/e5NGpqD05Iqgyai+OD9/tALc4sUEI2yQ7/dk9pKIXQ4RE9HR/pSkgbjeR
 LGokj08cgg==
 =ga3t
 -----END PGP SIGNATURE-----

Merge tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block updates from Jens Axboe:

 - Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
   copies between kernel and userspace by matching registered buffer
   PFNs at I/O time. Includes selftests.

 - Refactor bio integrity to support filesystem initiated integrity
   operations and arbitrary buffer alignment.

 - Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
   and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
   unify synchronous bi_end_io callbacks.

 - Fix zone write plug refcount handling and plug removal races. Add
   support for serializing zone writes at QD=1 for rotational zoned
   devices, yielding significant throughput improvements.

 - Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
   command.

 - Add io_uring passthrough (uring_cmd) support to the BSG layer.

 - Replace pp_buf in partition scanning with struct seq_buf.

 - zloop improvements and cleanups.

 - drbd genl cleanup, switching to pre_doit/post_doit.

 - NVMe pull request via Keith:
      - Fabrics authentication updates
      - Enhanced block queue limits support
      - Workqueue usage updates
      - A new write zeroes device quirk
      - Tagset cleanup fix for loop device

 - MD pull requests via Yu Kuai:
      - Fix raid5 soft lockup in retry_aligned_read()
      - Fix raid10 deadlock with check operation and nowait requests
      - Fix raid1 overlapping writes on writemostly disks
      - Fix sysfs deadlock on array_state=clear
      - Proactive RAID-5 parity building with llbitmap, with
        write_zeroes_unmap optimization for initial sync
      - Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
        version mismatch fallback
      - Fix bcache use-after-free and uninitialized closure
      - Validate raid5 journal metadata payload size
      - Various cleanups

 - Various other fixes, improvements, and cleanups

* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
  ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
  scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
  block: refactor blkdev_zone_mgmt_ioctl
  MAINTAINERS: update ublk driver maintainer email
  Documentation: ublk: address review comments for SHMEM_ZC docs
  ublk: allow buffer registration before device is started
  ublk: replace xarray with IDA for shmem buffer index allocation
  ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
  ublk: verify all pages in multi-page bvec fall within registered range
  ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
  xfs: use bio_await in xfs_zone_gc_reset_sync
  block: add a bio_submit_or_kill helper
  block: factor out a bio_await helper
  block: unify the synchronous bi_end_io callbacks
  xfs: fix number of GC bvecs
  selftests/ublk: add read-only buffer registration test
  selftests/ublk: add filesystem fio verify test for shmem_zc
  selftests/ublk: add hugetlbfs shmem_zc test for loop target
  selftests/ublk: add shared memory zero-copy test
  selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
  ...
2026-04-13 15:51:31 -07:00
Dan Carpenter
0a42ca4d2b scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
The bounds checking in scsi_bsg_uring_cmd() does not work because
cmd->request_len is a u32 and scmd->cmd_len is a u16.  We check that
scmd->cmd_len is valid but if the cmd->request_len is more than
USHRT_MAX it would still lead to a buffer overflow when we do the
copy_from_user().

Fixes: 7b6d3255e7 ("scsi: bsg: add io_uring passthrough handler")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/adjNnMYK7A7KMNkA@stanley.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-04-10 06:41:26 -06:00
Li RongQing
271aeff266 scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
Change the memory allocation for qp_cpu_map to use the actual number of
CPUs ('nr_cpu_ids') instead of the maximum possible CPUs ('NR_CPUS').
This saves memory on systems where the maximum CPU limit is much higher
than the active CPU count.

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20260331053245.1839-1-lirongqing@baidu.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-08 22:33:39 -04:00
Claudiu Beznea
03a5e8ec68 scsi: mpi3mr: Fix typo
Fix typo in "synchronize".

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260403133109.2744351-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-08 22:26:30 -04:00
Yang Xiuwei
1e111c4b3a scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
If device_add(&sdkp->disk_dev) fails, put_device() runs
scsi_disk_release(), which frees the scsi_disk but leaves the gendisk
referenced. The device_add_disk() error path in sd_probe() calls
put_disk(gd); call put_disk(gd) here to mirror that cleanup.

Fixes: 265dfe8ebb ("scsi: sd: Free scsi_disk device via put_device()")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Link: https://patch.msgid.link/20260330014952.152776-1-yangxiuwei@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-08 22:10:44 -04:00
Li Tian
9cf351b289 scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
The storvsc driver has become stricter in handling SRB status codes
returned by the Hyper-V host. When using Virtual Fibre Channel (vFC)
passthrough, the host may return SRB_STATUS_DATA_OVERRUN for
PERSISTENT_RESERVE_IN commands if the allocation length in the CDB does
not match the host's expected response size.

Currently, this status is treated as a fatal error, propagating
Host_status=0x07 [DID_ERROR] to the SCSI mid-layer. This causes
userspace storage utilities (such as sg_persist) to fail with transport
errors, even when the host has actually returned the requested
reservation data in the buffer.

Refactor the existing command-specific workarounds into a new helper
function, storvsc_host_mishandles_cmd(), and add PERSISTENT_RESERVE_IN
to the list of commands where SRB status errors should be suppressed for
vFC devices. This ensures that the SCSI mid-layer processes the returned
data buffer instead of terminating the command.

Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Link: https://patch.msgid.link/20260406015344.12566-1-litian@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-08 21:52:06 -04:00
Eric Biggers
7aa0f56d4b scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
As far as I can tell, CRYPTO_MD5 has been unnecessary here ever since it
was added by commit c899e4ef96 ("[SCSI] open-iscsi/linux-iscsi-5
Initiator: Kconfig update") in 2005.

CRYPTO was needed until commit 92186c1455 ("scsi: iscsi_tcp: Switch to
using the crc32c library"), but is no longer needed.

Remove these unnecessary kconfig selections.

Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260404203003.33738-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-08 21:41:39 -04:00
Martin K. Petersen
927722dcfe Merge patch series "Update lpfc to revision 15.0.0.0"
Justin Tee <justintee8345@gmail.com> says:

Update lpfc to revision 15.0.0.0

This patch set adds support for the G8 ASIC found on the LPe42100
series adapter models.

Updates are made to irq affinity assignment, mailbox command handling
related to initialization, SGL construction, firmware download
diagnostics, and the removal of an outdated performance feature.  We
also add 128G link speed selection and support.

The patches were cut against Martin's 7.1/scsi-queue tree.

Link: https://patch.msgid.link/20260331205928.119833-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:35:53 -04:00
Justin Tee
7f1e2c1cce scsi: lpfc: Update lpfc version to 15.0.0.0
Update lpfc version to 15.0.0.0

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-11-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:02 -04:00
Justin Tee
49b9f31e52 scsi: lpfc: Add PCI ID support for LPe42100 series adapters
Update supported pci_device_id table to include the values for the G8 ASIC
Device ID utilized by LPe42100 series of adapters.  The default reporting
string will be "LPe42100".

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:02 -04:00
Justin Tee
39d1d94166 scsi: lpfc: Introduce 128G link speed selection and support
128G link speed selection and support is added for various mailbox
commands, defines, and ACQE handling.  The default behavior to
autonegotiate supported link speed remains the same.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:02 -04:00
Justin Tee
a1421afa0d scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
When WRITE_OBJECT mailbox command fails during firmware update, the
lpfc_log_write_firmware_error() routine is used to log and parse commonly
found error codes.  Update this routine to also include ASIC_ID register
checks for notifying users of incompatible images.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:02 -04:00
Justin Tee
ba6dec7e70 scsi: lpfc: Update construction of SGL when XPSGL is enabled
The construction of SGLs is updated to safeguard ASIC boundary requirements
when using XPSGL.

The LSP type SGE is used to notify where a continuing SGL resides.
Typically, this means that the LSP is the last SGE in an SGL because the
current SGL has reached its maximum size and the LSP is used to refer to
the next follow up SGL.  Due to ASIC boundary requirements, there is a need
to ensure a 4 KB boundary is not crossed.  Thus, for a maximum size of 256
byte SGLs or 16 SGEs, this means restricting the LSP to being the 12th SGE
for the very first SGL that is used for pre-registration.  If additional
SGEs are needed, the LSP will be the last SGE position within that follow
up SGL as was previously implemented.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:02 -04:00
Justin Tee
384075eb19 scsi: lpfc: Remove deprecated PBDE feature
The PBDE feature is no longer supported and its related fields are removed
in this patch.  There are no expected side effects with regards to existing
functionality.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:02 -04:00
Justin Tee
5b402a8ace scsi: lpfc: Add REG_VFI mailbox cmd error handling
If lpfc_issue_reg_vfi() returns an error in lpfc_rcv_plogi(), then
execution of lpfc_rcv_plogi() continues and lpfc_reg_rpi() is called, which
allocates an mbuf.  When this REG_RPI mailbox is issued, it inevitably
fails because the VFI is not registered.  However, the REG_RPI failure does
not free the mbuf that was allocated in lpfc_reg_rpi() because there is no
check for mbox error status in lpfc_defer_plogi_acc().

Fix by adding a check in lpfc_rcv_plogi() if lpfc_reg_vfi() fails, then
exit early.  Also, add mailbox status check in lpfc_defer_plogi_acc to
enter the REG_RPI mbox_cmpl functions and free the allocated mbuf.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:01 -04:00
Justin Tee
f75754f2fe scsi: lpfc: Log MCQE contents for mbox commands with no context
Update log message to display the entirety of an MCQE for which there is no
submission context.  This log message is not expected to occur and hence is
tagged as a LOG_TRACE_EVENT.  As such, move the hbalock release to before
this log message so that the trace event process does not hold the hbalock
for too long.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:01 -04:00
Justin Tee
35f22f84be scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
When specifying rq version, it is preferred to refer to SLI4 interface type
instead of the get_sli4_parameters mailbox command response.  If SLI4
if_type is 2 or above, then the newer version 1 is used for rq_create
mailbox commands.  Otherwise, version 0 is used and is meant for older
adapters.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:01 -04:00
Justin Tee
e32b5e8f09 scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
The purpose of the lpfc_next_online_cpu() call is to save the CPU index for
the next iteration of the for (index = 0; index < vectors; index++) loop.
Because we’ve reached the last iteration of the loop, cpumask_next(cpu,
aff_mask) returns nr_cpu_ids.  Thus, if we already know we've reached the
last iteration of the IRQ affinity assignment loop, then we can just break
and exit.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:34:01 -04:00
Bart Van Assche
1821f77fda scsi: aic7xxx: Fix compiler warnings triggered by user space code
Fix the following compiler warnings:

aicasm_gram.y:1107:24: warning: comparison of different enumeration types
      ('scope_type' and 'enum yytokentype') [-Wenum-compare]
 1107 |                  || last_scope->type == T_ELSE) {
      |                     ~~~~~~~~~~~~~~~~ ^  ~~~~~~
aicasm_scan.l:392:14: warning: using the result of an assignment as a condition
      without parentheses [-Wparentheses]
  392 |                                 while (c = *yptr++) {
      |                                        ~~^~~~~~~~~
aicasm_macro_scan.l:153:1: warning: non-void function does not return a value
      [-Wreturn-type]
  153 | }
      | ^

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260402153341.2909184-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:18:12 -04:00
Pengpeng Hou
8e8cb6f399 scsi: hpsa: Enlarge controller and IRQ name buffers
hpsa formats the controller name into h->devname[8] and derives
interrupt names from it in h->intrname[][16]. Once host_no reaches four
digits, "hpsa%d" no longer fits in devname, and the derived IRQ names
can then overrun the interrupt-name buffers as well.

The previous fix switched these builders to bounded formatting, but that
would truncate user-visible controller and IRQ names. Keep the existing
names intact instead by enlarging the fixed buffers to cover the current
formatted strings.

Fixes: 2946e82bdd ("hpsa: use scsi host_no as hpsa controller number")
Fixes: 8b47004a55 ("hpsa: add interrupt number to /proc/interrupts interrupt name")
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260401120552.78541-1-pengpeng@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 21:09:43 -04:00
Martin K. Petersen
fc0a1d05e4 Merge branch 7.0/scsi-fixes into 7.1/scsi-staging
Pull in fixes to resolve mpi3mr merge conflict.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-04-02 20:31:22 -04:00
Jakub Kicinski
8ffb33d770 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-7.0-rc7).

Conflicts:

net/vmw_vsock/af_vsock.c
  b18c833888 ("vsock: initialize child_ns_mode_locked in vsock_net_init()")
  0de607dc4f ("vsock: add G2H fallback for CIDs not owned by H2G transport")

Adjacent changes:

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
  ceee35e567 ("bnxt_en: Refactor some basic ring setup and adjustment logic")
  57cdfe0dc7 ("bnxt_en: Resize RSS contexts on channel count change")

drivers/net/wireless/intel/iwlwifi/mld/mac80211.c
  4d56037a02 ("wifi: iwlwifi: mld: block EMLSR during TDLS connections")
  687a95d204 ("wifi: iwlwifi: mld: correctly set wifi generation data")

drivers/net/wireless/intel/iwlwifi/mld/scan.h
  b6045c899e ("wifi: iwlwifi: mld: Refactor scan command handling")
  ec66ec6a5a ("wifi: iwlwifi: mld: Fix MLO scan timing")

drivers/net/wireless/intel/iwlwifi/mvm/fw.c
  078df640ef ("wifi: iwlwifi: mld: add support for iwl_mcc_allowed_ap_type_cmd v
2")
  323156c354 ("wifi: iwlwifi: mvm: don't send a 6E related command when not supported")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-02 11:03:13 -07:00
Fernando Fernandez Mancera
309b905dee ipv6: convert CONFIG_IPV6 to built-in only and clean up Kconfigs
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.

Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().

This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.

Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].

[1] http://www.linux-m68k.org/faq/ram.html

Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-29 11:21:22 -07:00
Linus Torvalds
afb54c1404 SCSI fixes on 20260327
Driver (and enclosure) only fixes.  Most are obvious.  The big change
 is in the tcm_loop driver to add command draining to error handling
 (the lack of which was causing hangs with the potential for double use
 crashes).
 
 Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 
 iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCacbqgxsUgAAAAAAEAA5t
 YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
 c2hpcC5jb20ACgkQ50LJTO6YrIUI2gEAsFQDk2XhLCv27jvmjGCCByhj13beAVbE
 XKtekxuYEZAA/3YYFpLJJeHdoAB29UINHRMp/uWPScKCNONQnSO0n8Mn
 =fNBe
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Driver (and enclosure) only fixes. Most are obvious. The big change is
  in the tcm_loop driver to add command draining to error handling (the
  lack of which was causing hangs with the potential for double use
  crashes)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: file: Use kzalloc_flex for aio_cmd
  scsi: scsi_transport_sas: Fix the maximum channel scanning issue
  scsi: target: tcm_loop: Drain commands in target_reset handler
  scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()
  scsi: ses: Handle positive SCSI error from ses_recv_diag()
2026-03-27 19:58:22 -07:00
Martin K. Petersen
1801c8284d Merge patch series "mpi3mr: Enhancements for mpi3mr"
Ranjan Kumar <ranjan.kumar@broadcom.com> says:

Enhancements for mpi3mr driver

Link: https://patch.msgid.link/20260320090326.47544-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2026-03-27 17:10:03 -04:00