Like ETTv3, ETMv4 also needs the similar modifications to support Context
ID tracing when PID namespace is enabled.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Coresight ETM drivers already support context-ID tracing, but it won't
work when PID namespace is enabled. This is because when using PID
namespace a process id (ie. VPID) seen from the current namespace differs
from the id (ie. PID) seen by kernel.
So when users write the process id seen by themselves to ETM, there needs
to be a translation from VPID to PID, as such ETM drivers will write the
PID into the Context ID register correctly.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If PID namespace is enabled, everytime users configure the Context ID
register to trace the specific process, there needs to be a translation
between the real PID seen from the kernel and VPID seen from the
namespace in which the user's process resides .
This patch just adds the translation interface for ETMs.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ctxid_val' array was used to store the value of ETM context ID comparator
which actually stores the process ID to be traced, so using 'ctxid_pid' as
its name instead make it easier to understand.
This patch also changes the ABI, it is normally not allowed, but
fortunately it is a testing ABI and very new for now. Nevertheless,
if you don't think it should be changed, we could always add an alias
for userspace.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ctxid_val' array was used to store the value of ETM context ID comparator
which actually stores the process ID to be traced, so using 'ctxid_pid' as
its name instead make it easier to understand.
This patch also changes the ABI, it is normally not allowed, but
fortunately it is a testing ABI and very new for now. Nevertheless,
if you don't think it should be changed, we could always add an alias
for userspace.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Macro builtin_platform_driver can be used for builtin drivers
that don't do anything in driver init. This file depends on
Kconfig CONFIG_CORESIGHT_LINKS_AND_SINKS which eventually
depends on CORESIGHT. Both CONFIG_CORESIGHT_LINKS_AND_SINKS and
CORESIGHT are bool. So, use builtin_platform_driver and remove
some boilerplate code.
Also, remove header file init.h as functionality like module_init
and module_exit is now relocated to module.h.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Suggested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Qualcomm's PTM v1.1 peripheral ID to supported devices.
This device could be found at least in MSM8974 and APQ8064
chipsets.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use module_platform_driver for drivers whose init and exit functions
only register and unregister, respectively.
A simplified version of the Coccinelle semantic patch that performs
this transformation is as follows:
@a@
identifier f, x;
@@
-static f(...) { return platform_driver_register(&x); }
@b depends on a@
identifier e, a.x;
@@
-static e(...) { platform_driver_unregister(&x); }
@c depends on a && b@
identifier a.f;
declarer name module_init;
@@
-module_init(f);
@d depends on a && b && c@
identifier b.e, a.x;
declarer name module_exit;
declarer name module_platform_driver;
@@
-module_exit(e);
+module_platform_driver(x);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 46d0d33350.
This binding is horrible and never should have been merged. It is not
documented nor are there any in tree users, so reverting it will not
break anything we care about. Lets revert it before we do have users.
The problems with it are:
- It is not documented.
- The GPIO connection is described with a custom property and uses Linux
GPIO numbering.
- The UART connection is described using the Linux tty device name.
Cc: Gigi Joseph <gigi.joseph@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a rework of the following patch sent almost a year back:
http://www.mail-archive.com/linux-rdma%40vger.kernel.org/msg20730.html
In presence of active mount if someone tries to rmmod vendor-driver, the
command remains stuck forever waiting for destruction of all rdma-cm-id.
in worst case client can crash during shutdown with active mounts.
The existing code assumes that ia->ri_id->device cannot change during
the lifetime of a transport. xprtrdma do not have support for
DEVICE_REMOVAL event either. Lifting that assumption and adding support
for DEVICE_REMOVAL event is a long chain of work, and is in plan.
The community decided that preventing the hang right now is more
important than waiting for architectural changes.
Thus, this patch introduces a temporary workaround to acquire HCA driver
module reference count during the mount of a nfs-rdma mount point.
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The verbs are obsolete. The ib_rereg_phys_mr() verb is not used by
kernel ULPs, and the last ib_reg_phys_mr() call site in the kernel
tree has now been removed.
Two staging tree call sites remain in the Lustre client. The Lustre
team has been notified of the deprecation of reg_phys_mr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
RDMA_NOMSG type calls are less efficient than RDMA_MSG. Count NOMSG
calls so administrators can tell if they happen to be used more than
expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
checkpatch.pl complained about the seq_printf() format string split
across lines and the use of %Lu.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Repair how rpcrdma_marshal_req() chooses which RDMA message type
to use for large non-WRITE operations so that it picks RDMA_NOMSG
in the correct situations, and sets up the marshaling logic to
SEND only the RPC/RDMA header.
Large NFSv2 SYMLINK requests now use RDMA_NOMSG calls. The Linux NFS
server XDR decoder for NFSv2 SYMLINK does not handle having the
pathname argument arrive in a separate buffer. The decoder could be
fixed, but this is simpler and RDMA_NOMSG can be used in a variety
of other situations.
Ensure that the Linux client continues to use "RDMA_MSG + read
list" when sending large NFSv3 SYMLINK requests, which is more
efficient than using RDMA_NOMSG.
Large NFSv4 CREATE(NF4LNK) requests are changed to use "RDMA_MSG +
read list" just like NFSv3 (see Section 5 of RFC 5667). Before,
these did not work at all.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently xprtrdma appends an extra chunk element to the RPC/RDMA
read chunk list of each NFSv4 WRITE compound. The extra element
contains the final GETATTR operation in the compound.
The result is an extra RDMA READ operation to transfer a very short
piece of each NFS WRITE compound (typically 16 bytes). This is
inefficient.
It is also incorrect.
The client is sending the trailing GETATTR at the same Position as
the preceding WRITE data payload. Whether or not RFC 5667 allows
the GETATTR to appear in a read chunk, RFC 5666 requires that these
two separate RPC arguments appear at two distinct Positions.
It can also be argued that the GETATTR operation is not bulk data,
and therefore RFC 5667 forbids its appearance in a read chunk at
all.
Although RFC 5667 is not precise about when using a read list with
NFSv4 COMPOUND is allowed, the intent is that only data arguments
not touched by NFS (ie, read and write payloads) are to be sent
using RDMA READ or WRITE.
The NFS client constructs GETATTR arguments itself, and therefore is
required to send the trailing GETATTR operation as additional inline
content, not as a data payload.
NB: This change is not backwards compatible. Some older servers do
not accept inline content following the read list. The Linux NFS
server should handle this content correctly as of commit
a97c331f9a ("svcrdma: Handle additional inline content").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently Linux always offers a reply chunk, even when the reply
can be sent inline (ie. is smaller than 1KB).
On the client, registering a memory region can be expensive. A
server may choose not to use the reply chunk, wasting the cost of
the registration.
This is a change only for RPC replies smaller than 1KB which the
server constructs in the RPC reply send buffer. Because the elements
of the reply must be XDR encoded, a copy-free data transfer has no
benefit in this case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The client has been setting up a reply chunk for NFS READs that are
smaller than the inline threshold. This is not efficient: both the
server and client CPUs have to copy the reply's data payload into
and out of the memory region that is then transferred via RDMA.
Using the write list, the data payload is moved by the device and no
extra data copying is necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-By: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When the size of the RPC message is near the inline threshold (1KB),
the client would allow messages to be sent that were a few bytes too
large.
When marshaling RPC/RDMA requests, ensure the combined size of
RPC/RDMA header and RPC header do not exceed the inline threshold.
Endpoints typically reject RPC/RDMA messages that exceed the size
of their receive buffers.
The two server implementations I test with (Linux and Solaris) use
receive buffers that are larger than the client’s inline threshold.
Thus so far this has been benign, observed only by code inspection.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
RDMA_MSGP type calls insert a zero pad in the middle of the RPC
message to align the RPC request's data payload to the server's
alignment preferences. A server can then "page flip" the payload
into place to avoid a data copy in certain circumstances. However:
1. The client has to have a priori knowledge of the server's
preferred alignment
2. Requests eligible for RDMA_MSGP are requests that are small
enough to have been sent inline, and convey a data payload
at the _end_ of the RPC message
Today 1. is done with a sysctl, and is a global setting that is
copied during mount. Linux does not support CCP to query the
server's preferences (RFC 5666, Section 6).
A small-ish NFSv3 WRITE might use RDMA_MSGP, but no NFSv4
compound fits bullet 2.
Thus the Linux client currently leaves RDMA_MSGP disabled. The
Linux server handles RDMA_MSGP, but does not use any special
page flipping, so it confers no benefit.
Clean up the marshaling code by removing the logic that constructs
RDMA_MSGP type calls. This also reduces the maximum send iovec size
from four to just two elements.
/proc/sys/sunrpc/rdma_inline_write_padding is a kernel API, and
thus is left in place.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Untangle the end of rpcrdma_ia_open() by moving DMA MR set-up, which
is different for each registration method, to the .ro_open functions.
This is refactoring only. No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
All HCA providers have an ib_get_dma_mr() verb. Thus
rpcrdma_ia_open() will either grab the device's local_dma_key if one
is available, or it will call ib_get_dma_mr(). If ib_get_dma_mr()
fails, rpcrdma_ia_open() fails and no transport is created.
Therefore execution never reaches the ib_reg_phys_mr() call site in
rpcrdma_register_internal(), so it can be removed.
The remaining logic in rpcrdma_{de}register_internal() is folded
into rpcrdma_{alloc,free}_regbuf().
This is clean up only. No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-By: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
PHYSICAL memory registration uses a single rkey for all of the
client's memory, thus is insecure. It is still useful in some cases
for testing.
Retain the ability to select PHYSICAL memory registration capability
via /proc/sys/sunrpc/rdma_memreg_strategy, but don't fall back to it
if the HCA does not support FRWR or FMR.
This means amso1100 no longer works out of the box with NFS/RDMA.
When using amso1100 HCAs, set the memreg_strategy sysctl to 6 before
performing NFS/RDMA mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In preparation for similar increases on NFS/RDMA servers, bump the
advertised credit limit for RPC/RDMA to 128. This allocates some
extra resources, but the client will continue to allow only the
number of RPCs in flight that the server requests via its advertised
credit limit.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The point of larger rsize and wsize is to reduce the per-byte cost
of memory registration and deregistration. Modern HCAs can typically
handle a megabyte or more with a single registration operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-By: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In particular, recognize when an IPv6 connection is bound.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In order to extend the balloon protocol, the hypervisor and the guest
driver need to agree on a set of supported functionality to use.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Philip P. Moltmann <moltmann@vmware.com>
Acked-by: Andy King <acking@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This split the function in two: the allocation part is inlined into the
inflate function and the lock part is kept into his own function.
This change is needed in order to be able to allocate more than one page
before doing the hypervisor call.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Philip P. Moltmann <moltmann@vmware.com>
Acked-by: Andy King <acking@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While cgroup subsystems can't be modules, blkcg supports dynamically
loadable policies which interact with cgroup core. Export
cgrp_dfl_root so that cgroup_on_dfl() can be used in those modules.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Without this patch, it is cumbersome to read the trace output but
ignoring the normal, potentially verbose, output of the debuggee. One
common example is doing something like the following:
perf trace -s find /tmp > /dev/null
Without this patch, the trace summary will be lost. Now, it will still
be printed at the end. This behavior is also applied by strace.
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-tqnks6y2cnvm5f9g2dsfr7zl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
color_vprintf was including the length of the invisible escape sequences
in its return argument. Don't include them to make the return value
usable for indentation calculations.
v2: Add comment, rebase
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1438649408-20807-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Seems like it's always '\n' through color_fprintf_ln, which is not used
at all, removing.. ;-)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1438649408-20807-2-git-send-email-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass global callchain_param into parse_callchain_record_opt and
perf_evsel__config_callgraph as parameter. So we can reuse these
functions to parse/config local param for callchain.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix five occurrences of the checkpatch.pl error:
ERROR: do not use assignment in if condition
The semantic patch that makes this change is:
// <smpl>
@@
identifier i;
expression E;
statement S1, S2;
@@
+ i = E;
if (
- (i = E)
+ i
) S1 else S2
@@
identifier i;
expression E;
statement S;
constant c;
binary operator b;
@@
+ i = E;
if (
- (i = E)
+ i
b
c ) S
// </smpl>
Signed-off-by: Kris Borer <kborer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using OF defined controllers the platform data struct is shared
between all devices, so it can't be used for device specific settings.
However it is currently used for the OF properties
needs-reset-on-resume and has-transaction-translator.
To fix this issue move setting hcd->has_tt to the probe and
move pdata->reset_on_resume to the private data.
Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IRQ_DOMAIN is a hidden config option, so depending on it doesn't
make any sense. Select the config option because it's required to
compile this driver.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
