Because of historical reason, audio clock didn't use CCF.
Let's use it now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the SILK board dependent part of the VIN0 device node.
Add the device node for Analog Devices ADV7180 video decoder to I2C1 bus.
Add the necessary subnodes to interconnect VIN0 and ADV7180 devices.
Based on the Henninger VIN0/ADV8170 device tree patch by myself.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A7794 part of the VIN[01] device nodes. Add aliases for
the VIN[01] device nodes.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the SILK board dependent part of the I2C1 device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A7794 parts of the I2C[0-5] device nodes.
Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Convert Marzen to use board-specific serial0 and serial1 instead
of the older shared SoC-specific SCIF index.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the SILK board dependent part of the QSPI device node.
Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it.
Based on the original patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A7794 part of the QSPI device node.
Based on original patch by Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe GPIO[0-6] controllers in the R8A7794 device tree.
Based on original patch by Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe the GPIO clocks in the R8A7794 device tree.
Based on the original patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add Silk Device tree bindings Documentation, listing it as a supported board.
This allows to use checkpatch to validate DTSes referring to the Silk board.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
The shmobile_clk_init() function has been removed and the linux/sh_clk.h
header doesn't need to be included anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that the only multiplatform boot is supported for all
shmobile platforms Makefile.boot may be removed.
This seems correct to me given:
* Setting MACHINE to no value in arch/arm/Makefile
if CONFIG_ARCH_MULTIPLATFORM is set
* Not including Makefile.boot in arch/arm/boot/Makefile
if MACHINE has no value
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
With Bock-W, the last legacy platform has been removed.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Bock-W was the last legacy clock platform, so this also removes the
common legacy clock code.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
They have all been eliminated now.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The last user of twd_local_timer was removed in commit c99cd90d98
("ARM: shmobile: r8a7779: Remove legacy SoC code").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The last caller of shmobile_earlytimer_init() was removed in commit
c99cd90d98 ("ARM: shmobile: r8a7779: Remove legacy SoC code").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The last users were removed in commit b587288001 ("ARM: shmobile:
R-Mobile: Remove legacy PM Domain code").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The last user of "intc.h" was removed in commit 9a9863987b ("ARM:
shmobile: Remove legacy SoC code for SH-Mobile AG5").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The last caller of shmobile_setup_console() was removed in commit
44d88c754e ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The last user of "sh-gpio.h" was removed in commit 1fa59bda21
("ARM: shmobile: Remove legacy board code for Armadillo-800 EVA").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The actual implementation was removed by commit 40216263d3 ("ARM:
shmobile: Remove unused r8a7778 auxdata and callback") in v3.12.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
There is no code to handle an error return in visornic, when it tries to
register with visorbus. This patch handles an error return from
visorbus_register_visor_driver() by dropping out of initialization.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cases where visorbus is compiled directly into the kernel, if
visorbus registration fails for any reason, it is still possible for
other drivers to call visorbus_register_visor_driver(), which could
cause an oops. Prevent this by saving the result of the call to
create_bus() in a static variable, and return an error code when the bus
hasn't been registered successfully.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there is an error in registering driver attributes, unregister
the driver as well.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The receive byte statistics was wrong in /proc/net/dev.
Move the collection of statistics after the proper amount
of bytes has been calculated and make sure you add it to
rx_bytes instead of just replacing it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Noticed we were not unregistering the netdevice if we failed to
create the debugfs entries. This patch fixes that problem.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling the setup of the SPI master directly causes a NULL pointer
dereference with master drivers without a separate setup function.
This problem is reproduceable on ARM MXS platform.
So fix this issue by using spi_setup() instead.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the result of the setup function isn't adequate to check
9-bit SPI support, we better check bits_per_word_mask. Btw this
change avoids a NULL pointer dereference with master drivers
without a separate setup function.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the lustre.org domain has been liberated we can again
use that for the main website URL and mailing list.
Also update the URL for userspace tools downloads and Git repo.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We discussed a bit with the folks on the Cc: list below what to do
with ION. Two big take-aways:
- High-performance drivers (like gpus) always want to play tricks with
coherency and will lie to the dma api (radeon, nouveau, i915 gpu
drivers all do so in upstream). What needs to be done here is fill
gaps in dma-buf so that we can do this without breaking the dma-api
expections of other clients like v4l. The consesus is that hw won't
stop needing these tricks anytime soon.
- Placement constraints for shared buffers won't be solved any other
way than through something platform-specific like ion with
platform-specific knowledge in userspace in something like gralloc.
For general-purpose devices where this assumption would be painful
for userspace (like servers) the consensus is that such devices will
have proper MMUs where placement constraint handling is fairly
irrelevant.
Hence it is reasonable to destage ion as-is without changing the
overall design to enable these use-cases and just fixing up a these
few fairly minor things. Since there won't relly be an open-source
userspace for ion (and hence drm maintainers won't take it) the
proposal is to eventually move it to drivers/android/ion.[hc]. Laura
would be ok with being maintainer once this is all done and ion is
destaged.
Note that Thiago is working on exposing the cpu cache flushing for
cpu access from userspace through mmaps so this is alread in progress.
Also adding him to the Cc: list.
v2: Add ION_IOC_IMPORT to the list of ioctl that probably should go.
Cc: Laura Abbott <labbott@redhat.com>
Cc: sumit.semwal@linaro.org
Cc: laurent.pinchart@ideasonboard.com
Cc: ghackmann@google.com
Cc: robdclark@gmail.com
Cc: david.brown@arm.com
Cc: romlem@google.com
Cc: Tiago Vignatti <tiago.vignatti@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If NO_DMA=y:
ERROR: "dma_free_coherent" [drivers/staging/most/mostcore/mostcore.ko] undefined!
ERROR: "dma_alloc_coherent" [drivers/staging/most/mostcore/mostcore.ko] undefined!
As all MOST sub drivers use DMA functionality, add a dependency on
HAS_DMA to MOSTCORE, and to MOST, which selects MOSTCORE.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix kconfig dependency warning and build errors.
warning: (HDM_USB) selects AIM_NETWORK which has unmet direct dependencies (STAGING && MOST && NET)
drivers/built-in.o: In function `aim_resume_tx_channel':
networking.c:(.text+0xd6f7a2): undefined reference to `netif_tx_wake_queue'
drivers/built-in.o: In function `aim_rx_data':
networking.c:(.text+0xd6f8c5): undefined reference to `__netdev_alloc_skb'
networking.c:(.text+0xd6f99a): undefined reference to `skb_put'
networking.c:(.text+0xd6fa44): undefined reference to `eth_type_trans'
networking.c:(.text+0xd6fa6f): undefined reference to `netif_rx'
drivers/built-in.o: In function `most_nd_setup':
networking.c:(.text+0xd6fad2): undefined reference to `ether_setup'
drivers/built-in.o: In function `most_nd_set_mac_address':
networking.c:(.text+0xd6fb0f): undefined reference to `eth_mac_addr'
drivers/built-in.o: In function `most_nd_open':
networking.c:(.text+0xd6fd37): undefined reference to `netif_tx_wake_queue'
drivers/built-in.o: In function `aim_probe_channel':
networking.c:(.text+0xd6febb): undefined reference to `alloc_netdev_mqs'
networking.c:(.text+0xd6ff18): undefined reference to `register_netdev'
networking.c:(.text+0xd6ff4a): undefined reference to `free_netdev'
drivers/built-in.o: In function `most_net_rm_netdev_safe.isra.0':
networking.c:(.text+0xd6ffcf): undefined reference to `unregister_netdev'
networking.c:(.text+0xd6ffdf): undefined reference to `free_netdev'
drivers/built-in.o: In function `most_nd_start_xmit':
networking.c:(.text+0xd70390): undefined reference to `kfree_skb'
drivers/built-in.o: In function `most_deliver_netinfo':
(.text+0xd70499): undefined reference to `netif_tx_wake_queue'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Michael Fabry <Michael.Fabry@microchip.com>
Cc: Christian Gromm <chris@engineersdelight.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ddc-i2c-bus property was missing from the veyron dtsi file since
downstream the ddc-i2c-bus was still being specified in rk3288.dtsi and
nobody noticed when the veyron dtsi was sent upstream. Add it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enables the musb-otg USB controller on the Lime2. The Lime2
differs from the Lime1 series in pins used for usb0 power.
Tested on a OlinuXino Lime2-4GB.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
i2c1 has a freescale mma7660 accelerometer connected to it at addr 0x4c,
i2c2 has a ft5x touchscreen connected to it at addr 0x38.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Jesurun Q5 has the musb hooked up to an usb-a receptacle, enable it
in host-only mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Commit 79ae3e66f8 (ARM: dts: sun4i: Add Iteaduino Plus A10) added a new
make target for the sun4i-a10-itead-iteaduino-plus dts file, but mistakenly
used .dts instead of the correct .dtb suffix. This resulted in a build error
like:
scripts/Makefile.dtbinst:42: target 'sun4i-a10-itead-iteaduino-plus.dts' doesn't match the target pattern
when doing a make dtbs_install.
Fix it to use the proper file name.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
