During fastmap attaching, check if a volume already exists when adding
the volume to volume tree. NOTE that the issue cannot happen, only if
the on-flash fastmap data is modified.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
`vol' is a newly allocated value by kzalloc. Initialize it by assignment
instead of `+='.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
s/fmpl1/fmpl
s/fmpl2/fmpl_wl
Add "WL" to the error message when wrong WL pool magic number is detected.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
register_shrinker() in ubifs_init() can fail due to fail to call kzalloc.
This patch fixes to check the return value of register_shrinker, otherwise
our shrinker may be unregistered after ubifs initialized successfully.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This patch makes ubiblock devices have minor numbers beginning from
0, allocated dynamically independently of the ubi device/volume
number. This property becomes useful because, on 32-bit architectures
with LFS turned off in a userspace program, device minor numbers
over 8 bits cause stat to return -EOVERFLOW. If the device number is
high (>1) due to multiple MTD partitions, such an overflow will occur.
While enabling LFS is clearly a nicer solution, it's often difficult
to turn on in practice globally as many widely distributed packages
don't work with LFS on.
Other storage systems have their own workarounds, with SCSI making
multiple device majors and MMC having a config option for the number
of partitions per device. A completely dynamic minor numbering is
simpler than these. It is unlikely that anyone is depending on a
static minor number since the major is dynamic anyway. In addition,
ubiblock is still relatively new, so now is the time to make such
changes.
Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Richard Weinberger <richard@nod.at>
With most of the clock code under clock driver already, the low-level
register access code, and the init code for the same, is no longer
needed outside the clock driver. Thus, these can be moved under clock
driver also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
As most of the clock driver code has migrated, these are no longer used
for anything. Thus remove these APIs completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
We should avoid exporting data from drivers, instead use an API for
registering the clock low level operations.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Several exported TI clock driver features are no longer needed outside
the clock driver itself, thus move all of these to the driver private
header file. Also, update some of the driver files to actually include
this header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With legacy clock support gone, this is no longer needed under platform,
so move it under the clock driver itself. Make some exports be driver
internal definitions at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove unnecessary declarations
from the TI clock header also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With the legacy clock support gone, this is no longer needed under
platform code-base. Thus, move this under the TI clock driver, and
remove the exported API from the public header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With the legacy support gone, OMAP2+ default gate clock can be moved
under clock driver. Create a new file for the purpose, and clean-up
the header exports a bit as some clock APIs are no longer needed
outside clock driver itself.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
clkdm_control is used to determine, whether clocks should trigger a
clockdomain transition when they are enabled/disabled. Keep this
functionality intact, but replace this with a clk_features flag
which can be initialized during boot if needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
This now only has a couple of variables within it, which are used outside
the file itself. Move these variables to where they are actually used,
and remove the file completely as it is now empty.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With the legacy clock support gone, OMAP3 generic DPLL code can now be
moved over to the clock driver also. A few un-unused clkoutx2 functions
are also removed at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Clock driver requires access to some CM API functions once the code
is being moved under the clock driver from the platform directory.
Gate type clock requires access to cm_wait_module_ready and
cm_split_idlest_reg functions, which are both used for waiting until
the module being clocked has been successfully activated. These CM
APIs are now exported through the ti_clk_ll_ops struct.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Clock driver requires access to certain clockdomain handling ops once
the code is being moved over under clock driver. Example of this is
clk_enable / clk_disable under omap3 DPLL code. The required clkdm
APIs are now exported through the ti_clk_ll_ops struct.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The legacy support is wrong and dangerous, as it doesn't take any
OPPs into account and does not scale voltages. Switching mpurate should
be handled through cpufreq.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
This is no longer used outside clock driver, so move it under the driver
and remove the export for it from the global header file.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
This is no longer needed in platform directory, as the legacy clock data
is gone, so move it under TI clock driver. Some static functions are
renamed also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
These files contain legacy clock implementations which are no longer used
for anything, thus remove them completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
This only contains clksel tables that were used with the legacy clock data.
Now that legacy clock data is completely gone, this file can be removed
also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The clksel clock type is no longer used for anything, it is rather
replaced with common clock divider code. Thus, remove the dead code
from kernel.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Core DVFS support code is currently referencing clksel functionality, which
is wrong. The m2 divisor has been implemented as a divider clock for a long
time already, so replace the validrate check call with proper functionality.
Core DVFS is currently not supported in the kernel so verifying this patch
can be rather tricky, this should probably be fixed at some point.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With the legacy clock support gone, the OMAP interface clock implementation
can be moved under the clock driver. Some temporary header file tweaks are
also needed to make this change work properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With the legacy clock support gone, the OMAP4 specific DPLL implementations
can be moved under the clock driver. Change some of the function prototypes
to be static at the same time, and remove some exports from the global TI
clock driver header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
With the legacy clock data now gone, we can start moving OMAP clock
type implementations under clock driver. Start this with moving the
generic OMAP DPLL clock type under TI clock driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
As most of the clock driver support code is going to be moved under
drivers/clk/ti, an API for setting / getting the SoC specific clock
features is needed. This patch provides this API and changes the
existing code to use it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Current code uses devm_request_irq() in .probe, so drop the unneeded
free_irq() call in .remove.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Christian Ruppert <christian.ruppert@alitech.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The CrystalCove GPIO irqchip doesn't have irq_set_wake callback defined
so we should set IRQCHIP_SKIP_SET_WAKE for it or it would cause an irq
desc's wake_depth unbalanced warning during system resume phase from the
gpio_keys driver, which is the driver for the power button of the ASUS
T100 laptop.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This removes some redundant code but does not have any functional impact.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For drivers supporting TSO or similar features, but that still have
PN assignment in software, there's a need to have some memory to
store the current PN value. As mac80211 already stores this and it's
somewhat complicated to add a per-driver area to the key struct (due
to the dynamic sizing thereof) it makes sense to just move the TX PN
to the keyconf, i.e. the public part of the key struct.
As TKIP is more complicated and we won't able to offload it in this
way right now (fast-xmit is skipped for TKIP unless the HW does it
all, and our hardware needs MMIC calculation in software) I've not
moved that for now - it's possible but requires exposing a lot of
the internal TKIP state.
As an bonus side effect, we can remove a lot of code by assuming the
keyseq struct has a certain layout - with BUILD_BUG_ON to verify it.
This might also improve performance, since now TX and RX no longer
share a cacheline.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since mt6397 is no need to support interrupt controller,
I judged "interrupt-controller" property to skip it last patch.
But the if judgement should on the contrary, this is a bug.
And find of_property_read_bool is better for this case.
So using of_property_read_bool instead of of_find_property.
Also fix bug of misuse pointer.
Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add ies/smt support for MSDC3.
Also fix ies bug for pin 106 and 107.
Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A recent change in kernel/acct.c added a new warning for many
configurations on ARM:
kernel/acct.c: In function 'acct_pin_kill':
arch/arm/include/asm/cmpxchg.h:122:3: warning: value computed is not used [-Wunused-value]
The code is in fact correct, it's just a cmpxchg() call that
intentionally ignores the result, and no other code does that. The
warning does not show up on x86 because of the way that its cmpxchg()
macro is written. This changes the ARM implementation to use a similar
construct with a compound expression instead of a typecast, which causes
the compiler to not complain about an unused result.
Fix the other macros in this file in a similar way, and place them
just below their function implementations.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Vybrids has 112 peripheral interrupts which can be routed to the
Cortex-M4's NVIC interrupt controller.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 5261ef2ea836 ("ARM: 8366/1: move Dual-Timer SP804 driver to
drivers/clocksource") moved SP804 to drivers/clocksource resulting in
it being selectable on platforms/architectures without the config
GENERIC_SCHED_CLOCK enabled. Due to that, it results in the following
build failure(e.g. x86_64 allmodconfig)
drivers/built-in.o: In function `__sp804_clocksource_and_sched_clock_init':
(.init.text+0x1a0e7): undefined reference to `sched_clock_register'
This patch fixes the build by making ARM_TIMER_SP804 depend on
GENERIC_SCHED_CLOCK
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The ARM Dual-Timer SP804 module is peripheral found not only on ARM32
platforms but also on ARM64 platforms.
This patch moves the driver out of arch/arm to driver/clocksource
so that it can be used on ARM64 platforms also.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Olof Johansson <olof@lixom.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The header asm/hardware/arm_timer.h is included in various machine
specific files to access TIMER_CTRL and initialise to a known state.
This patch introduces a new function sp804_timer_disable to disable
the SP804 timers and uses the same for initialising the timers to
known(off) state, thereby removing the dependency on the header
asm/hardware/arm_timer.h
This change is in prepartion to move sp804 timer support out of arch/arm
so that it can be used on ARM64 platforms.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The new veneer support for loadable modules on ARM uses the
__opcode_to_mem_thumb32() function to count R_ARM_THM_CALL
and R_ARM_THM_JUMP24 relocations.
However, this function is not defined for big-endian kernels
on ARMv5 or before, causing a compile-time error:
arch/arm/kernel/module-plts.c: In function 'count_plts':
arch/arm/kernel/module-plts.c:124:9: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]
__opcode_to_mem_thumb32(0x07ff2fff)))
^
As we know that this part of the function is only needed for
Thumb2 kernels, and that those can never happen with BE32,
we can avoid the error by enclosing the code in an #ifdef.
Fixes: 7d485f647c ("ARM: 8220/1: allow modules outside of bl range")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Put secondary_startup_arm() prototype in arch/arm/include/asm/smp.h
so users doesn't have to add extern prototype in their code.
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
secondary_startup_arm is used as ARM mode secondary start up function
when ther kernel is compiled in THUMB mode, however the label itself
is still in .thumb mode. readelf shows:
160979: c020a581 120 FUNC GLOBAL DEFAULT 2 secondary_startup_arm
Make sure the label is in ARM mode as well.
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
We did try trimming whitespace surrounding the 'model name'
field in /proc/cpuinfo since reportedly some userspace uses it
in string comparisons and there were discrepancies:
[thetango@prarit ~]# grep "^model name" /proc/cpuinfo | uniq -c | sed 's/\ /_/g'
______1_model_name :_AMD_Opteron(TM)_Processor_6272
_____63_model_name :_AMD_Opteron(TM)_Processor_6272_________________
However, there were issues with overlapping buffers, string
sizes and non-byte-sized copies in the previous proposed
solutions; see Link tags below for the whole farce.
So, instead of diddling with this more, let's simply extend what
was there originally with trimming any present trailing
whitespace. Final result is really simple and obvious.
Testing with the most insane model IDs qemu can generate, looks
good:
.model_id = " My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = "My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " My funny model ID CPU",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " ",
______4_model_name :__
.model_id = "",
______4_model_name :_15/02
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1432050210-32036-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
