In an attempt to start to clean up the monstrosity of the sysfs abuse in
the gasket driver, let's remove code that is not used at all. The
GASKET_SYSFS_REG() macro is never used, so delete it.
Cc: Rob Springer <rspringer@google.com>
Cc: John Joseph <jnjoseph@google.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is exported, yet no one calls it so just remove the dead code.
Cc: Rob Springer <rspringer@google.com>
Cc: John Joseph <jnjoseph@google.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No one calls it, it is claimed to be "legacy", whatever that means, so
just remove the dead code.
Cc: Rob Springer <rspringer@google.com>
Cc: John Joseph <jnjoseph@google.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No one calls it, so just remove the dead code.
Cc: Rob Springer <rspringer@google.com>
Cc: John Joseph <jnjoseph@google.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is exported, yet no one calls it so just remove the dead code.
Cc: Rob Springer <rspringer@google.com>
Cc: John Joseph <jnjoseph@google.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gasket_interrupt_pause() does nothing, and no one calls it, so remove it
as it is dead-weight.
Cc: Rob Springer <rspringer@google.com>
Cc: John Joseph <jnjoseph@google.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: f9358e12a0 ("net: mvpp2: split ingress traffic into multiple flows")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng says:
====================
fix DCTCP delayed ACK
This patch series addresses the issue that sometimes DCTCP
fail to acknowledge the latest sequence and result in sender timeout
if inflight is small.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK
related callbacks are no longer needed
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, when a data segment was sent an ACK was piggybacked
on the data segment without generating a CA_EVENT_NON_DELAYED_ACK
event to notify congestion control modules. So the DCTCP
ca->delayed_ack_reserved flag could incorrectly stay set when
in fact there were no delayed ACKs being reserved. This could result
in sending a special ECN notification ACK that carries an older
ACK sequence, when in fact there was no need for such an ACK.
DCTCP keeps track of the delayed ACK status with its own separate
state ca->delayed_ack_reserved. Previously it may accidentally cancel
the delayed ACK without updating this field upon sending a special
ACK that carries a older ACK sequence. This inconsistency would
lead to DCTCP receiver never acknowledging the latest data until the
sender times out and retry in some cases.
Packetdrill script (provided by Larry Brakmo)
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8>
0.110 < [ect0] . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
0.200 < [ect0] . 1:1001(1000) ack 1 win 257
0.200 > [ect01] . 1:1(0) ack 1001
0.200 write(4, ..., 1) = 1
0.200 > [ect01] P. 1:2(1) ack 1001
0.200 < [ect0] . 1001:2001(1000) ack 2 win 257
0.200 write(4, ..., 1) = 1
0.200 > [ect01] P. 2:3(1) ack 2001
0.200 < [ect0] . 2001:3001(1000) ack 3 win 257
0.200 < [ect0] . 3001:4001(1000) ack 3 win 257
0.200 > [ect01] . 3:3(0) ack 4001
0.210 < [ce] P. 4001:4501(500) ack 3 win 257
+0.001 read(4, ..., 4500) = 4500
+0 write(4, ..., 1) = 1
+0 > [ect01] PE. 3:4(1) ack 4501
+0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257
// Previously the ACK sequence below would be 4501, causing a long RTO
+0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack
+0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data
+0 > [ect01] . 4:4(0) ack 6501 // now acks everything
+0.500 < F. 9501:9501(0) ack 4 win 257
Reported-by: Larry Brakmo <brakmo@fb.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We accidentally left out the error handling for kstrtoul().
Fixes: a520030e32 ("qlcnic: Implement flash sysfs callback for 83xx adapter")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By a simple extension of of_phy_get_and_connect() drivers
that have a fixed link on e.g. RGMII can support also
fixed links, so in addition to:
ethernet-port {
phy-mode = "rgmii";
phy-handle = <&foo>;
};
This setup with a fixed-link node and no phy-handle will
now also work just fine:
ethernet-port {
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
This is very helpful for connecting random ethernet ports
to e.g. DSA switches that typically reside on fixed links.
The phy-mode is still there as the fixes link in this case
is still an RGMII link.
Tested on the Cortina Gemini driver with the Vitesse DSA
router chip on a fixed 1Gbit link.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct tcf_walker with additional 'cookie' field. It is intended to
be used by classifier walk implementations to continue iteration directly
from particular filter, instead of iterating 'skip' number of times.
Change flower walk implementation to save filter handle in 'cookie'. Each
time flower walk is called, it looks up filter with saved handle directly
with idr, instead of iterating over filter linked list 'skip' number of
times. This change improves complexity of dumping flower classifier from
quadratic to linearithmic. (assuming idr lookup has logarithmic complexity)
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reported-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
People noticed that the code match on IEEE 802.1ad (ETH_P_8021AD) ethertype,
and this implies Q-in-Q or double tagged VLANs. Thus, we better parse
the next VLAN header too. It is even marked as a TODO.
This is relevant for real world use-cases, as XDP cpumap redirect can be
used when the NIC RSS hashing is broken. E.g. the ixgbe driver HW cannot
handle double tagged VLAN packets, and places everything into a single
RX queue. Using cpumap redirect, users can redistribute traffic across
CPUs to solve this, which is faster than the network stacks RPS solution.
It is left as an exerise how to distribute the packets across CPUs. It
would be convenient to use the RX hash, but that is not _yet_ exposed
to XDP programs. For now, users can code their own hash, as I've demonstrated
in the Suricata code (where Q-in-Q is handled correctly).
Reported-by: Florian Maury <florian.maury-cv@x-cli.eu>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull i2c fixes from Wolfram Sang:
- I2C core bugfix regarding bus recovery
- driver bugfix for the tegra driver
- typo correction
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: recovery: if possible send STOP with recovery pulses
i2c: tegra: Fix NACK error handling
i2c: stu300: use non-archaic spelling of failes
Inside intel_engine_is_idle(), we flush the tasklet to ensure that is
being run in a timely fashion (ksoftirqd has taught us to expect the
worst). However, if we are in the middle of reset, the HW may not yet be
ready to execute the submission tasklet and so we must respect the
disable flag.
Fixes: dd0cf235d8 ("drm/i915: Speed up idle detection by kicking the tasklets")
Testcase: igt/drv_selftest/live_hangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-2-chris@chris-wilson.co.uk
Daniel Borkmann says:
====================
pull-request: bpf 2018-07-13
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix AF_XDP TX error reporting before final kernel release such that it
becomes consistent between copy mode and zero-copy, from Magnus.
2) Fix three different syzkaller reported issues: oob due to ld_abs
rewrite with too large offset, another oob in l3 based skb test run
and a bug leaving mangled prog in subprog JITing error path, from Daniel.
3) Fix BTF handling for bitfield extraction on big endian, from Okash.
4) Fix a missing linux/errno.h include in cgroup/BPF found by kbuild bot,
from Roman.
5) Fix xdp2skb_meta.sh sample by using just command names instead of
absolute paths for tc and ip and allow them to be redefined, from Taeung.
6) Fix availability probing for BPF seg6 helpers before final kernel ships
so they can be detected at prog load time, from Mathieu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8b7008620b ("net: Don't copy pfmemalloc flag in
__copy_skb_header()") introduced a different handling for the
pfmemalloc flag in copy and clone paths.
In __skb_clone(), now, the flag is set only if it was set in the
original skb, but not cleared if it wasn't. This is wrong and
might lead to socket buffers being flagged with pfmemalloc even
if the skb data wasn't allocated from pfmemalloc reserves. Copy
the flag instead of ORing it.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 8b7008620b ("net: Don't copy pfmemalloc flag in __copy_skb_header()")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for IGMPMSG_WRVIFWHOLE which is used to pass
full packet and real vif id when the incoming interface is wrong.
While the RP and FHR are setting up state we need to be sending the
registers encapsulated with all the data inside otherwise we lose it.
The RP then decapsulates it and forwards it to the interested parties.
Currently with WRONGVIF we can only be sending empty register packets
and will lose that data.
This behaviour can be enabled by using MRT_PIM with
val == IGMPMSG_WRVIFWHOLE. This doesn't prevent IGMPMSG_WRONGVIF from
happening, it happens in addition to it, also it is controlled by the same
throttling parameters as WRONGVIF (i.e. 1 packet per 3 seconds currently).
Both messages are generated to keep backwards compatibily and avoid
breaking someone who was enabling MRT_PIM with val == 4, since any
positive val is accepted and treated the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull timer fixes from Ingo Molnar:
"A clocksource driver fix and a revert"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: arm_arch_timer: Set arch_mem_timer cpumask to cpu_possible_mask
Revert "tick: Prefer a lower rating device only if it's CPU local device"
Pull perf tool fixes from Ingo Molnar:
"Misc tooling fixes: python3 related fixes, gcc8 fix, bashism fixes and
some other smaller fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Use python-config --includes rather than --cflags
perf script python: Fix dict reference counting
perf stat: Fix --interval_clear option
perf tools: Fix compilation errors on gcc8
perf test shell: Prevent temporary editor files from being considered test scripts
perf llvm-utils: Remove bashism from kernel include fetch script
perf test shell: Make perf's inet_pton test more portable
perf test shell: Replace '|&' with '2>&1 |' to work with more shells
perf scripts python: Add Python 3 support to EventClass.py
perf scripts python: Add Python 3 support to sched-migration.py
perf scripts python: Add Python 3 support to Util.py
perf scripts python: Add Python 3 support to SchedGui.py
perf scripts python: Add Python 3 support to Core.py
perf tools: Generate a Python script compatible with Python 2 and 3
Add DID and kfd_device_info for Raven.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
memory_exception_data is already initialized for not-present faults.
It only needs to be overridden for permission faults.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven multiple PPRs can be queued up by the hardware. When the
first of those requests is handled by the IOMMU driver, the memory
access succeeds. After that the application may be done with the
memory and unmap it. At that point the page table entries are
invalidated, but there are still outstanding duplicate PPRs for those
addresses. When the IOMMU driver processes those duplicate requests,
it finds invalid page table entries and triggers an invalid PPR fault.
As a workaround, don't signal invalid PPR faults on Raven to avoid
segfaulting applications that haven't done anything wrong. As a side
effect, real GPU memory access faults may go unnoticed by the
application.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven Invalid PPRs (peripheral page requests) can be reported
because multiple PPRs can be still queued when memory is freed.
Apply a rate limit to avoid flooding the log in this case.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On Raven there is only one SDMA engine instead of previously assumed two,
so we need to adapt our code to this new scenario.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If there are several memory banks that has the same properties in CRAT,
we aggregate them into one memory bank. This cleans up memory banks on
APUs (e.g. Raven) where the CRAT reports each memory channel as a
separate bank. This only confuses user mode, which only deals with
virtual memory.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Jakub Kicinski says:
====================
This set is adding support for loading driver and offload XDP
at the same time. This enables advanced use cases where some
of the work is offloaded to the NIC and some is done by the host.
Separate netlink attributes are added for each mode of operation.
Driver callbacks for offload are cleaned up a little, including
removal of .prog_attached flag.
====================
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rather than calculating it everytime we rebuild the toc
buffer, calculate it once initially and then just copy
the cached results to the vram buffer.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use kaddr directly rather than secondary variable.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than using the index variable stored in vram. If
the device fails to come back online after a resume cycle,
reads from vram will return all 1s which will cause a
segfault. Based on a patch from Thomas Martitz <kugel@rockbox.org>.
This avoids the segfault, but we still need to sort out
why the GPU does not come back online after a resume.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105760
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the PP_STATE_SUPPORT_* rather than AMD_CG_SUPPORT_*
when communicating with the SMU.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently we do not turn off autocal when scaling is in bypass.
In case vbios enalbes auto scale and our first mode set is a non-scaled
mode we have autocal on causing screen corruption.
[how]
moves turning autocal off to be first thing done during scaler setup
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Prevent unexpected color shows if DalMpVisualConfirm enable.
[How] Zero out color configuration data for DalMpVisualConfirm when initiating.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DV updated their dml with an option to use max vstartup,
this updates dc dml with the same option
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The previous code could allow through attempts to enable more streams
than there are timing generators, in designs where the number of pipes
is greater than the number of timing generators.
[How]
Compare the new stream count to the resource pool's timing generator
count, instead of its pipe count. Also correct a typo in the error
message.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when hw team does phy parameters tuning, there is need to force dp
link rate or lane count grater than the values from dp receiver to
check dp tx. current debufs limit link rate, lane count no more
than rx caps.
[How] remove force settings less than rx caps check
v2: Fix typo in title
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Regamma/CTM tests require CRC support
[How]
The CRC registers that were used in DCE exist under different
names in DCN. The code was copied from DCE (in
dc/dce110/dce110_timing_generator.c) into DCN, and changed to
use the DCN register access helper functions.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
PNP cause bsod regression fix
[HOW]
Add NULL check
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Hugo Hu <Hugo.Hu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Add a switch statement to translate pp's powerlevel enum
to dc powerlevel statement enum
[how]
Add a translator function
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
"DalEnableHDMI20" set to 0, disallow HDMI YCbCr420 and pixel clock > 340Mhz
Default is enabled.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
