Pinctrl_usbh1reg defines pinmux setting for reset GPIO used by
usbh1phy, but is not referenced by that node. Fix that.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
commit bfd694d5e2 ("mmc: core: Add tunable delay
before detecting card after card is inserted") adds
"u32 cd_debounce_delay_ms" to the last of mmc_gpio
struct and cause "char cd_label[0]" NOT work as string
pointer of card detect label, when "cat /proc/interrupts",
the devname for card detect gpio is incorrect as below:
144: 0 gpio-mxc 22 Edge ▒
161: 0 gpio-mxc 7 Edge ▒
Move the cd_label field down to fix this, and drop the
zero from the array size to prevent future similar bugs,
the result is correct as below:
144: 0 gpio-mxc 22 Edge 2198000.mmc cd
161: 0 gpio-mxc 7 Edge 2190000.mmc cd
Fixes: bfd694d5e2 ("mmc: core: Add tunable delay before detecting card after card is inserted")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull in branch for switching pxa to DMA slave maps, from Robert Jarzmik.
This is needed due to dependencies of changes for the pxamci mmc driver.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We found that the original implementation will only use the built-in dtb
pointer instead of the pointer pass from bootloader. This bug is fixed
by this patch.
Signed-off-by: Greentime Hu <greentime@andestech.com>
data cache.
This issue is found by Guo Ren. Based on the Documentation/core-api/cachetlb.rst
and it says:
"Any necessary cache flushing or other coherency operations
that need to occur should happen here. If the processor's
instruction cache does not snoop cpu stores, it is very
likely that you will need to flush the instruction cache
for copy_to_user_page()."
"If the icache does not snoop stores then this
routine(flush_icache_range) will need to flush it."
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
If SGMII was selected in the DT then the device should
write the SGMII enable bit.
If SGMII is not selected in the DT then the SGMII bit
should be disabled.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC_PLUGIN_SUBDIR has never been used. If you really need this in
the future, please re-add it then.
For now, the code is unused. Remove.
'export HOSTLIBS' is not necessary either.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
In the quest to remove all stack VLA usage from the kernel[1], this
switches to using a stack size large enough for the saved routine and
adds a sanity check making sure the routine doesn't overflow into the
0x600 exception handler.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Magnus Karlsson says:
====================
This patch set fixes three bugs in the SKB TX path of AF_XDP.
Details in the individual commits.
The structure of the patch set is as follows:
Patch 1: Fix for lost completion message
Patch 2-3: Fix for possible multiple completions of single packet
Patch 4: Fix potential race during error
Changes from v1:
* Added explanation of race in commit message of patch 4.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a potential race in the TX completion code for the SKB
case. One process enters the sendmsg code of an AF_XDP socket in order
to send a frame. The execution eventually trickles down to the driver
that is told to send the packet. However, it decides to drop the
packet due to some error condition (e.g., rings full) and frees the
SKB. This will trigger the SKB destructor and a completion will be
sent to the AF_XDP user space through its
single-producer/single-consumer queues.
At the same time a TX interrupt has fired on another core and it
dispatches the TX completion code in the driver. It does its HW
specific things and ends up freeing the SKB associated with the
transmitted packet. This will trigger the SKB destructor and a
completion will be sent to the AF_XDP user space through its
single-producer/single-consumer queues. With a pseudo call stack, it
would look like this:
Core 1:
sendmsg() being called in the application
netdev_start_xmit()
Driver entered through ndo_start_xmit
Driver decides to free the SKB for some reason (e.g., rings full)
Destructor of SKB called
xskq_produce_addr() is called to signal completion to user space
Core 2:
TX completion irq
NAPI loop
Driver irq handler for TX completions
Frees the SKB
Destructor of SKB called
xskq_produce_addr() is called to signal completion to user space
We now have a violation of the single-producer/single-consumer
principle for our queues as there are two threads trying to produce at
the same time on the same queue.
Fixed by introducing a spin_lock in the destructor. In regards to the
performance, I get around 1.74 Mpps for txonly before and after the
introduction of the spinlock. There is of course some impact due to
the spin lock but it is in the less significant digits that are too
noisy for me to measure. But let us say that the version without the
spin lock got 1.745 Mpps in the best case and the version with 1.735
Mpps in the worst case, then that would mean a maximum drop in
performance of 0.5%.
Fixes: 35fcde7f8d ("xsk: support for Tx")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sendmsg in the SKB path of AF_XDP can now return EBUSY when a packet
was discarded and completed by the driver. Just ignore this message
in the sample application.
Fixes: b4b8faa1de ("samples/bpf: sample application and documentation for AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reported-by: Pavel Odintsov <pavel@fastnetmon.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fixed a bug in which a frame could be completed more than once
when an error was returned from dev_direct_xmit(). The code
erroneously retried sending the message leading to multiple
calls to the SKB destructor and therefore multiple completions
of the same buffer to user space.
The error code in this case has been changed from EAGAIN to EBUSY
in order to tell user space that the sending of the packet failed
and the buffer has been return to user space through the completion
queue.
Fixes: 35fcde7f8d ("xsk: support for Tx")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reported-by: Pavel Odintsov <pavel@fastnetmon.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The code in xskq_produce_addr erroneously checked if there
was up to LAZY_UPDATE_THRESHOLD amount of space in the completion
queue. It only needs to check if there is one slot left in the
queue. This bug could under some circumstances lead to a WARN_ON_ONCE
being triggered and the completion message to user space being lost.
Fixes: 35fcde7f8d ("xsk: support for Tx")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reported-by: Pavel Odintsov <pavel@fastnetmon.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Simple overlapping changes in stmmac driver.
Adjust skb_gro_flush_final_remcsum function signature to make GRO list
changes in net-next, as per Stephen Rothwell's example merge
resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to "select BUG" when CONFIG_HARDENED_USERCOPY is enabled.
The kernel thread will always die, regardless of the CONFIG_BUG.
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
[kees: tweak commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing property (clock latency) as well to make it all
work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch attempts to close a hole leading to a BUG seen with hot
removals during writes [1].
A block device (NVME namespace in this test case) is formatted to EXT4
without partitions. It's mounted and write I/O is run to a file, then
the device is hot removed from the slot. The superblock attempts to be
written to the drive which is no longer present.
The typical chain of events leading to the BUG:
ext4_commit_super()
__sync_dirty_buffer()
submit_bh()
submit_bh_wbc()
BUG_ON(!buffer_mapped(bh));
This fix checks for the superblock's buffer head being mapped prior to
syncing.
[1] https://www.spinics.net/lists/linux-ext4/msg56527.html
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Currently, we use the ACPI processor ID only for the leaf/processor nodes
as the specification states it must match the value of the ACPI processor
ID field in the processor’s entry in the MADT.
However, if a PPTT structure represents a processors group, it
matches a processor container UID in the namespace and the
ACPI_PPTT_ACPI_PROCESSOR_ID_VALID flag indicates whether the
ACPI processor ID is valid.
Let's use UID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set to be
consistent instead of using table offset as it's currently done for
non-leaf nodes.
Fixes: 2bd00bcd73 (ACPI/PPTT: Add Processor Properties Topology Table parsing)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Jeremy Linton <jeremy.linton@arm.com>
[ rjw: Changelog (minor) ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
se_dev_entry.ua_count is only used to check whether or not
se_dev_entry.ua_list is empty. Use list_empty_careful() instead. Checking
whether or not ua_list is empty without holding the lock that protects that
list is fine because the code that dequeues from that list will check again
whether or not that list is empty.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Send a valid ASC / ASCQ combination back to the initiator if a SCSI command
is received after a LUN has been removed. This patch fixes the following
call trace:
WARNING: CPU: 0 PID: 4 at drivers/target/target_core_transport.c:3131 translate_sense_reason+0x164/0x190 [target_core_mod]
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
RIP: 0010:translate_sense_reason+0x164/0x190 [target_core_mod]
Call Trace:
transport_send_check_condition_and_sense+0x95/0x1c0 [target_core_mod]
transport_generic_request_failure+0x102/0x270 [target_core_mod]
transport_generic_new_cmd+0x138/0x340 [target_core_mod]
transport_handle_cdb_direct+0x2f/0x80 [target_core_mod]
target_submit_cmd_map_sgls+0x212/0x2a0 [target_core_mod]
srpt_handle_new_iu+0x244/0x680 [ib_srpt]
__ib_process_cq+0x6d/0xc0 [ib_core]
ib_cq_poll_work+0x18/0x50 [ib_core]
process_one_work+0x20b/0x6a0
worker_thread+0x35/0x380
kthread+0x117/0x130
ret_from_fork+0x24/0x30
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The code under the "release:" label can only be reached after se_cmd has
been set to a non-NULL value. Hence remove the if (se_cmd) test. Keep the
else-part since calling transport_generic_free_cmd() is not necessary for a
command that has not been submitted to the core.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 4d3895d5ea ("target/tcm_loop: Merge struct tcm_loop_cmd and struct tcm_loop_tmr")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since most target drivers do not use the second fabric_make_tpg() argument
("group") and since it is trivial to derive the group pointer from the wwn
pointer, do not pass the group pointer to fabric_make_tpg().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes: e48354ce07 ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of calling __iscsit_free_cmd() from inside iscsit_aborted_task() if
a command has been aborted and from inside iscsit_free_cmd() if a command
has not been aborted, call __iscsit_free_cmd() from inside
lio_release_cmd(). The latter function is namely called for all commands
once the reference count has dropped to zero.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of embedding the completion that is used for waiting for command
completion in struct se_cmd, let the context that waits for command
completion allocate it. This makes it possible to have a single code path
for non-aborted and aborted commands in target_release_cmd_kref() and
avoids that transport_generic_free_cmd() has to call
cmd->se_tfo->release_cmd() directly. This patch does not change any
functionality. Note: transport_generic_free_cmd() only waits until the
se_cmd reference count has reached zero after it has set both
CMD_T_FABRIC_STOP and CMD_T_ABORTED.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since target_wait_free_cmd() skips TMFs with no associated LUN, it is safe
to call that function for such commands. Use this to simplify
transport_generic_free_cmd(). The only functional change in this patch is
that CMD_T_FABRIC_STOP gets set for TMFs with no associated LUN by
transport_generic_free_cmd().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move identical code outside an if/else statement. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the two calls to transport_cmd_finish_abort() outside
core_tmr_handle_tas_abort() it is guaranteed that CMD_T_TAS is not set. Use
this property to fold core_tmr_handle_tas_abort() into
transport_cmd_finish_abort(). This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The code that can set CMD_T_TAS is executed by the same thread as the
thread that executes core_tmr_handle_tas_abort(). That means that no
locking is needed to check CMD_T_TAS from inside
core_tmr_handle_tas_abort(). This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document those aspects of transport_cmd_check_stop_to_fabric() and
transport_generic_free_cmd() of which it is nontrivial to derive these from
their implementation.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Target drivers must call target_sess_cmd_list_set_waiting() and
target_wait_for_sess_cmds() before freeing a session. Since freeing a
session is only safe after all commands that are associated with a session
have finished, make target_wait_for_sess_cmds() also wait for commands that
are being aborted. Instead of setting a flag in each pending command from
target_sess_cmd_list_set_waiting() and waiting in
target_wait_for_sess_cmds() on a per-command completion, only set a
per-session flag in the former function and wait on a per-session
completion in the latter function. This change is safe because once a SCSI
initiator system has submitted a command a target system is always allowed
to execute it to completion. See also commit 0f4a943168 ("target: Fix
remote-port TMR ABORT + se_cmd fabric stop").
This patch is based on the following two patches:
* Bart Van Assche, target: Simplify session shutdown code, February 19, 2015
(8df5463d7d).
* Christoph Hellwig, target: Rework session shutdown code, December 7, 2015
(http://thread.gmane.org/gmane.linux.scsi.target.devel/10695).
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Other than initializing xcopy_pt_sess.sess_wait_list, this patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does not change any functionality but makes the next patch
easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The approach for adding a device to the devices_idr data structure and for
removing it is as follows:
* &dev->dev_group.cg_item is initialized before a device is added to
devices_idr.
* If the reference count of a device drops to zero then
target_free_device() removes the device from devices_idr.
* All devices_idr manipulations are protected by device_mutex.
This means that increasing the reference count of a device is sufficient to
prevent removal from devices_idr and also that it is safe access
dev_group.cg_item for any device that is referenced by devices_idr. Use
this to modify target_find_device() and target_for_each_device() such that
these functions no longer introduce a dependency between device_mutex and
the configfs root inode mutex.
Note: it is safe to pass a NULL pointer to config_item_put() and also to
config_item_get_unless_zero().
This patch prevents that lockdep reports the following complaint:
======================================================
WARNING: possible circular locking dependency detected
4.12.0-rc1-dbg+ #1 Not tainted
------------------------------------------------------
rmdir/12053 is trying to acquire lock:
(device_mutex#2){+.+.+.}, at: [<ffffffffa010afce>]
target_free_device+0xae/0xf0 [target_core_mod]
but task is already holding lock:
(&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sb->s_type->i_mutex_key#14){++++++}:
lock_acquire+0x59/0x80
down_write+0x36/0x70
configfs_depend_item+0x3a/0xb0 [configfs]
target_depend_item+0x13/0x20 [target_core_mod]
target_xcopy_locate_se_dev_e4_iter+0x87/0x100 [target_core_mod]
target_devices_idr_iter+0x16/0x20 [target_core_mod]
idr_for_each+0x39/0xc0
target_for_each_device+0x36/0x50 [target_core_mod]
target_xcopy_locate_se_dev_e4+0x28/0x80 [target_core_mod]
target_xcopy_do_work+0x2e9/0xdd0 [target_core_mod]
process_one_work+0x1ca/0x3f0
worker_thread+0x49/0x3b0
kthread+0x109/0x140
ret_from_fork+0x31/0x40
-> #0 (device_mutex#2){+.+.+.}:
__lock_acquire+0x101f/0x11d0
lock_acquire+0x59/0x80
__mutex_lock+0x7e/0x950
mutex_lock_nested+0x16/0x20
target_free_device+0xae/0xf0 [target_core_mod]
target_core_dev_release+0x10/0x20 [target_core_mod]
config_item_put+0x6e/0xb0 [configfs]
configfs_rmdir+0x1a6/0x300 [configfs]
vfs_rmdir+0xb7/0x140
do_rmdir+0x1f4/0x200
SyS_rmdir+0x11/0x20
entry_SYSCALL_64_fastpath+0x23/0xc2
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sb->s_type->i_mutex_key#14);
lock(device_mutex#2);
lock(&sb->s_type->i_mutex_key#14);
lock(device_mutex#2);
*** DEADLOCK ***
3 locks held by rmdir/12053:
#0: (sb_writers#10){.+.+.+}, at: [<ffffffff811e223f>]
mnt_want_write+0x1f/0x50
#1: (&sb->s_type->i_mutex_key#14/1){+.+.+.}, at: [<ffffffff811cb97e>]
do_rmdir+0x15e/0x200
#2: (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140
stack backtrace:
CPU: 3 PID: 12053 Comm: rmdir Not tainted 4.12.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x86/0xcf
print_circular_bug+0x1c7/0x220
__lock_acquire+0x101f/0x11d0
lock_acquire+0x59/0x80
__mutex_lock+0x7e/0x950
mutex_lock_nested+0x16/0x20
target_free_device+0xae/0xf0 [target_core_mod]
target_core_dev_release+0x10/0x20 [target_core_mod]
config_item_put+0x6e/0xb0 [configfs]
configfs_rmdir+0x1a6/0x300 [configfs]
vfs_rmdir+0xb7/0x140
do_rmdir+0x1f4/0x200
SyS_rmdir+0x11/0x20
entry_SYSCALL_64_fastpath+0x23/0xc2
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
[Rebased to handle conflict withe target_find_device removal]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some target code uses config_item_name() while other code accesses .ci_name
directly. Make the target code consistent by switching to
config_item_name().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
328728630d ("scsi: avoid to hold host-wide counter of host_busy for
scsi_mq") adds one extra check on scsi_host_busy(shost) in
scsi_host_queue_ready(), which is wrong and not necessary, can causes
booting stall on LSI53c895A.
So remove the check.
Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 328728630d ("scsi: avoid to hold host-wide counter of host_busy for scsi_mq")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the scsi_transport_srp implementation it cannot be avoided to
iterate over a klist from atomic context when using the legacy block
layer instead of blk-mq. Hence this patch that makes it safe to use
klists in atomic context. This patch avoids that lockdep reports the
following:
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&k->k_lock)->rlock);
local_irq_disable();
lock(&(&q->__queue_lock)->rlock);
lock(&(&k->k_lock)->rlock);
<Interrupt>
lock(&(&q->__queue_lock)->rlock);
stack backtrace:
Workqueue: kblockd blk_timeout_work
Call Trace:
dump_stack+0xa4/0xf5
check_usage+0x6e6/0x700
__lock_acquire+0x185d/0x1b50
lock_acquire+0xd2/0x260
_raw_spin_lock+0x32/0x50
klist_next+0x47/0x190
device_for_each_child+0x8e/0x100
srp_timed_out+0xaf/0x1d0 [scsi_transport_srp]
scsi_times_out+0xd4/0x410 [scsi_mod]
blk_rq_timed_out+0x36/0x70
blk_timeout_work+0x1b5/0x220
process_one_work+0x4fe/0xad0
worker_thread+0x63/0x5a0
kthread+0x1c1/0x1e0
ret_from_fork+0x24/0x30
See also commit c9ddf73476 ("scsi: scsi_transport_srp: Fix shost to
rport translation").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since nr_bytes == blk_rq_bytes(rq) == rq->__data_len, the
rq->__data_len = nr_bytes assignment does not modify the value of
rq->__data_len. Hence remove that assignment. Note: the code in
sd_done() that sets the residual to zero for zone report requests
is not affected by this patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The id_tbl->table pointer points to unsigned long so static checkers
complain that instead of 4 we should be allocating sizeof(long) bytes.
We're trying to allocate enough bits for the bitmap. The size variable is
always 1024. (1024 / 32 * 4) is the same as (1024 / 64 * 8) so this
doesn't change runtime, but this is the more idiomatic way to do it and
makes the static checker happy.
[mkp: typo]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently an open firmware property is copied into partition_name variable
without keeping a room for \0.
Later one, this variable (partition_name), which is 97 bytes long, is
strncpyed into ibmvcsci_host_data->madapter_info->partition_name, which is
96 bytes long, possibly truncating it 'again' and removing the \0.
This patch simply decreases the partition name to 96 and just copy using
strlcpy() which guarantees that the string is \0 terminated. I think there
is no issue if this there is a truncation in this very first copy, i.e,
when the open firmware property is read and copied into the driver for the
very first time;
This issue also causes the following warning on GCC 8:
drivers/scsi/ibmvscsi/ibmvscsi.c:281:2: warning: strncpy output may be truncated copying 96 bytes from a string of length 96 [-Wstringop-truncation]
...
inlined from ibmvscsi_probe at drivers/scsi/ibmvscsi/ibmvscsi.c:2221:7:
drivers/scsi/ibmvscsi/ibmvscsi.c:265:3: warning: strncpy specified bound 97 equals destination size [-Wstringop-truncation]
CC: Bart Van Assche <bart.vanassche@wdc.com>
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add an optional parameter "start_sector" to allow the start of the
device to be offset by the specified number of 512-byte sectors. The
sectors below this offset are not used by the writecache device and are
left to be used for disk labels and/or userspace metadata (e.g. lvm).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull MD fixes from Shaohua Li:
"Two small fixes for MD:
- an error handling fix from me
- a recover bug fix for raid10 from BingJing"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid10: fix that replacement cannot complete recovery after reassemble
MD: cleanup resources in failure
Two fixes here which were breaking OpenRISC boot.
- Fix bug in __pte_free_tlb() exposed in 4.18 by Matthew Wilcox's page
table flag addition.
- Fix issue booting on real hardware if delay slot detection emulation
is disabled.
-----BEGIN PGP SIGNATURE-----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=7uxj
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/stffrdhrn/linux
Pull OpenRISC fixes from Stafford Horne:
"Two fixes for issues which were breaking OpenRISC boot:
- Fix bug in __pte_free_tlb() exposed in 4.18 by Matthew Wilcox's
page table flag addition.
- Fix issue booting on real hardware if delay slot detection
emulation is disabled"
* tag 'for-linus' of git://github.com/stffrdhrn/linux:
openrisc: entry: Fix delay slot exception detection
openrisc: Call destructor during __pte_free_tlb
new_active_crtcs is a bitmask, new_active_crtc_count is the
actual count.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
