Commit graph

781,636 commits

Author SHA1 Message Date
Joel Stanley
87975a0117 net/ncsi: Silence debug messages
In normal operation we see this series of messages as the host drives
the network device:

 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
 ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
 ftgmac100 1e660000.ethernet eth0: NCSI interface down
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI interface up
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
 ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
 ftgmac100 1e660000.ethernet eth0: NCSI interface down
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI interface up

This makes all of these messages netdev_dbg. They are still useful to
debug eg. misbehaving network device firmware, but we do not need them
filling up the kernel logs in normal operation.

Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20 07:26:58 +09:00
Daniel Borkmann
c51818d5b7 bpf, xdp, i40e: fix i40e_build_skb skb reserve and truesize
Using skb_reserve(skb, I40E_SKB_PAD + (xdp->data - xdp->data_hard_start))
is clearly wrong since I40E_SKB_PAD already points to the offset where
the original xdp->data was sitting since xdp->data_hard_start is defined
as xdp->data - i40e_rx_offset(rx_ring) where latter offsets to I40E_SKB_PAD
when build skb is used.

However, also before cc5b114dcf ("bpf, i40e: add meta data support")
this seems broken since bpf_xdp_adjust_head() helper could have been used
to alter headroom and enlarge / shrink the frame and with that the assumption
that the xdp->data remains unchanged does not hold and would push a bogus
packet to upper stack.

ixgbe got this right in 9247080816 ("ixgbe: add XDP support for pass and
drop actions"). In any case, fix it by removing the I40E_SKB_PAD from both
skb_reserve() and truesize calculation.

Fixes: cc5b114dcf ("bpf, i40e: add meta data support")
Fixes: 0c8493d90b ("i40e: add XDP support for pass and drop actions")
Reported-by: Keith Busch <keith.busch@linux.intel.com>
Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Tested-by: Keith Busch <keith.busch@linux.intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20 07:24:28 +09:00
David S. Miller
d563e7a2ff Merge branch 'qed-fixes'
Sudarsana Reddy Kalluru says:

====================
qed*: Fix series.

The patch series fixes few issues in the qed/qede drivers.
Please consider applying this series to "net".
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20 07:15:34 +09:00
Sudarsana Reddy Kalluru
ff54d5cd9e qed: Do not advertise DCBX_LLD_MANAGED capability.
Do not advertise DCBX_LLD_MANAGED capability i.e., do not allow
external agent to manage the dcbx/lldp negotiation. MFW acts as lldp agent
for qed* devices, and no other lldp agent is allowed to coexist with mfw.

Also updated a debug print, to not to display the redundant info.

Fixes: a1d8d8a51 ("qed: Add dcbnl support.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20 07:15:34 +09:00
Sudarsana Reddy Kalluru
3935a70968 qed: Add sanity check for SIMD fastpath handler.
Avoid calling a SIMD fastpath handler if it is NULL. The check is needed
to handle an unlikely scenario where unsolicited interrupt is destined to
a PF in INTa mode.

Fixes: fe56b9e6a ("qed: Add module with basic common support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20 07:15:34 +09:00
Sudarsana Reddy Kalluru
4f9de4df90 qed: Fix possible memory leak in Rx error path handling.
Memory for packet buffers need to be freed in the error paths as there is
no consumer (e.g., upper layer) for such packets and that memory will never
get freed.
The issue was uncovered when port was attacked with flood of isatap
packets, these are multicast packets hence were directed at all the PFs.
For foce PF, this meant they were routed to the ll2 module which in turn
drops such packets.

Fixes: 0a7fb11c ("qed: Add Light L2 support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20 07:15:34 +09:00
Andreas Gruenbacher
e184fde6f3 iomap: add private pointer to struct iomap
Add a private pointer to struct iomap to allow filesystems to pass data
from iomap_begin to iomap_end.  Will be used by gfs2 for passing on the
on-disk inode buffer head.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-19 15:10:57 -07:00
Christoph Hellwig
72b4daa241 iomap: add an iomap-based readpage and readpages implementation
Simply use iomap_apply to iterate over the file and a submit a bio for
each non-uptodate but mapped region and zero everything else.  Note that
as-is this can not be used for file systems with a blocksize smaller than
the page size, but that support will be added later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-19 15:10:57 -07:00
Christoph Hellwig
63899c6f88 iomap: add a page_done callback
This will be used by gfs2 to attach data to transactions for the journaled
data mode.  But the concept is generic enough that we might be able to
use it for other purposes like encryption/integrity post-processing in the
future.

Based on a patch from Andreas Gruenbacher.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-19 15:10:56 -07:00
Andreas Gruenbacher
19e0c58f65 iomap: generic inline data handling
Add generic inline data handling by adding a pointer to the inline data
region to struct iomap.  When handling a buffered IOMAP_INLINE write,
iomap_write_begin will copy the current inline data from the inline data
region into the page cache, and iomap_write_end will copy the changes in
the page cache back to the inline data region.

This doesn't cover inline data reads and direct I/O yet because so far,
we have no users.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[hch: small cleanups to better fit in with other iomap work]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-19 15:10:56 -07:00
Andreas Gruenbacher
ebf00be37d iomap: complete partial direct I/O writes synchronously
According to xfstest generic/240, applications seem to expect direct I/O
writes to either complete as a whole or to fail; short direct I/O writes
are apparently not appreciated.  This means that when only part of an
asynchronous direct I/O write succeeds, we can either fail the entire
write, or we can wait for the partial write to complete and retry the
remaining write as buffered I/O.  The old __blockdev_direct_IO helper
has code for waiting for partial writes to complete; the new
iomap_dio_rw iomap helper does not.

The above mentioned fallback mode is needed for gfs2, which doesn't
allow block allocations under direct I/O to avoid taking cluster-wide
exclusive locks.  As a consequence, an asynchronous direct I/O write to
a file range that contains a hole will result in a short write.  In that
case, wait for the short write to complete to allow gfs2 to recover.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-19 15:10:55 -07:00
Andreas Gruenbacher
3d7b6b21f6 iomap: mark newly allocated buffer heads as new
In iomap_to_bh, not only mark buffer heads in IOMAP_UNWRITTEN maps as
new, but also buffer heads in IOMAP_MAPPED maps with the IOMAP_F_NEW
flag set.  This will be used by filesystems like gfs2, which allocate
blocks in iomap->begin.

Minor corrections to the comment for IOMAP_UNWRITTEN maps.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-19 15:10:55 -07:00
Christoph Hellwig
a6d639da63 fs: factor out a __generic_write_end helper
Bits of the buffer.c based write_end implementations that don't know
about buffer_heads and can be reused by other implementations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-19 15:10:55 -07:00
Matthias Schiffer
6fb8656646
mips: ftrace: fix static function graph tracing
ftrace_graph_caller was never run after calling ftrace_trace_function,
breaking the function graph tracer. Fix this, bringing it in line with the
x86 implementation.

While we're at it, also streamline the control flow of _mcount a bit to
reduce the number of branches.

This issue was reported before:
https://www.linux-mips.org/archives/linux-mips/2014-11/msg00295.html

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Tested-by: Matt Redfearn <matt.redfearn@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/18929/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: stable@vger.kernel.org # v3.17+
2018-06-19 15:00:12 -07:00
Jan Kiszka
93c9a7f879 PCI: Clean up resource allocation in devm_of_pci_get_host_bridge_resources()
Instead of first allocating and then freeing memory for struct resource in
case we cannot parse a PCI resource from the device tree, work against a
local struct and kmemdup() it when we decide to go with it.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
2018-06-19 16:52:42 -05:00
Rodrigo Vivi
ac2bf28ad1 Merge tag 'gvt-next-2018-06-19' of https://github.com/intel/gvt-linux into drm-intel-next-queued
gvt-next-2018-06-19

- fine-grained per vgpu locking (Colin)
- fine-grained vgpu scheduler locking (Colin)
- deliver windows guest cursor hotspot info (Tina)
- GVT-g BXT support (Colin)
- other misc and checker fixes (Chris, Xinyun)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619090043.ly6gquafbmxuus6h@zhen-hp.sh.intel.com
2018-06-19 14:44:35 -07:00
Boris Brezillon
1e1d5b6939 MAINTAINERS: Remove the AT91 clk driver entry
I've stopped actively maintaining this driver for quite some time
already, and at91 maintainers are doing a good job at maintaining it.
Remove the AT91 clk driver entry so that the driver automatically
falls under the "ARM/Microchip (AT91) SoC support" entry.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-06-19 23:30:08 +02:00
Arnd Bergmann
d30c8d2031 leds: ledtrig-activity: use ktime_get_boot_ns()
get_monotonic_boottime() is deprecated, so let's convert this to
the simpler ktime_get_boot_ns().

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-19 22:38:29 +02:00
Leon Romanovsky
cfdeb8934b RDMA/mlx5: Refactor transport domain checks
Put all relevant checks for transport domain in the
mlx5_ib_alloc/dealloc_transport_domain functions.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19 13:32:17 -06:00
Arnd Bergmann
bd646104ac jfs: use time64_t for otime
The file creation time in the inode uses time_t which is defined
differently on 32-bit and 64-bit architectures and deprecated. The
representation in the inode uses an unsigned 32-bit number, but this
gets wrapped around after year 2038 when assigned to a time_t.

This changes the type to time64_t, so we can support the full range of
timestamps between 1970 and 2106 on 32-bit systems like we do on 64-bit
systems already, and matching what we do for the atime/ctime/mtime stamps
since the introduction of 64-bit timestamps in VFS.

Note: the otime stamp is not actually used anywhere at the moment in
the kernel, it is just set when writing a file, so none of this really
makes a difference unless we implement setting the btime field in the
getattr() callback.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2018-06-19 14:09:30 -05:00
Michel Dänzer
7303b39e46 drm/amdgpu: Make amdgpu_vram_mgr_bo_invisible_size always accurate
Even BOs with AMDGPU_GEM_CREATE_NO_CPU_ACCESS may end up at least
partially in CPU visible VRAM, in particular when all VRAM is visible.

v2:
* Don't take VRAM mgr spinlock, not needed (Christian König)
* Make loop logic simpler and clearer.

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:51:45 -05:00
Michel Dänzer
5e9244ff58 drm/amdgpu: Refactor amdgpu_vram_mgr_bo_invisible_size helper
Preparation for the following fix, no functional change intended.

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:51:22 -05:00
Michel Dänzer
34d6d59986 drm/amdgpu: Update pin_size values before unpinning BO
At least in theory, ttm_bo_validate may move the BO, in which case the
pin_size accounting would be inconsistent with when the BO was pinned.

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:50:56 -05:00
Takashi Sakamoto
6c5e1ac0e1 ALSA: firewire-motu: add support for Motu Traveler
This commit adds support for MOTU Traveler, launched in 2005, discontinued
quite before. As a result, transmission of PCM frame and MIDI messages is
available via ALSA PCM and RawMIDI/Sequencer interfaces.

This model supports sampling transmission frequency up to 192.0 kHz, and
AES/EBU on XLR interface and ADAT on optical interface. Unlike
Motu 828MkII, Windows driver can switch fetching mode for DSP, like
mute/unmute feature.

Although this commit enables high sampling transmission frequency, actual
sound from this model is not good. As long as I tested, it's silence at
176.4 kHz, and it includes hissing noise at 192.0 kHz. In my opinion, as I
reported at 3526ce7f9ba7 ('ALSA: firewire-motu: add MOTU specific protocol
layer'), timestamping on source packet header (SPH) may not still be good
for this model as well.

$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04106505  bus_info_length 4, crc_length 16, crc 25861
404  31333934  bus_name "1394"
408  20001000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c  0001f200  company_id 0001f2     |
410  0001f32f  device_id 000001f32f  | EUI-64 0001f2000001f32f

               root directory
               -----------------------------------------------------------------
414  0004c65c  directory_length 4, crc 50780
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  00035955  directory_length 3, crc 22869
42c  120001f2  specifier id
430  13000009  version
434  17107800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  000206b2  leaf_length 2, crc 1714
43c  0001f200  company_id 0001f2     |
440  0001f32f  device_id 000001f32f  | EUI-64 0001f2000001f32f

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:54 +02:00
Takashi Sakamoto
191ef57683 ALSA: firewire-motu: cancel chunk alignment for protocol version 2
For MOTU protocol version 2, this driver arranges the number of data
chunks to align chunks to quadlet data channel. However, MOTU Traveler
has padding bytes in the end of data block at high clock mode.

This commit removes the arrangement. Fortunately, at low and middle clock
mode, supported model for v2 protocol (828mkII) gets no influence from this
change because all of combination for data chunks are just aligned to
quadlet data channel.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:52 +02:00
Takashi Sakamoto
06ac0b6f8f ALSA: firewire-motu: add a flag for AES/EBU on XLR interface
MOTU Traveler supports AES/EBU on XLR interface and data block of rx/tx
packet includes two chunk for the interface. This commit adds a flag
for this purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:50 +02:00
Takashi Sakamoto
81720c6d49 ALSA: firewire-motu: add a flag for chunks for main 1/2 out
This driver explicitly assumes that all of supported models have main data
chunk separated from chunk for analog ports. However, MOTU Traveler doesn't
support the separated main data chunk.

This commit adds a flag for the separated main data chunk.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:47 +02:00
Takashi Sakamoto
6c1549c4cc ALSA: firewire-motu: suppless consumption for unused element of array in stack
In MOTU firewire protocol, data block consists of 24 bit data chunks except
for one quadlet for source packet header (SPH). The number of data chunk in
a data block is different between three clock modes; low, middle and high.
When unit supports ADAT on optical interface, the data block includes some
chunks for ADAT channels. These ADAT chunks are unavailable at high mode.

This driver has local functions to calculate the number of ADAT chunks. But
They uses stack for three clock modes. This is useless for higher mode.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:45 +02:00
James Zhu
5c53d19b76 drm/amdgpu:All UVD instances share one idle_work handle
All UVD instanses have only one dpm control, so it is better
to share one idle_work handle.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:34:27 -05:00
Stefan Agner
a21daa88d4 drm/amdgpu: Use correct enum to set powergating state
Use enum amd_powergating_state instead of enum amd_clockgating_state.
The underlying value stays the same, so there is no functional change
in practise. This fixes a warning seen with clang:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1930:14: warning: implicit
      conversion from enumeration type 'enum amd_clockgating_state' to
      different enumeration type 'enum amd_powergating_state'
      [-Wenum-conversion]
                                                       AMD_CG_STATE_UNGATE);
                                                       ^~~~~~~~~~~~~~~~~~~

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:17:39 -05:00
Junwei Zhang
761f58e0e9 drm/amdgpu: correct GART location info
Avoid confusing the GART with the GTT domain.

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:17:39 -05:00
Chunming Zhou
8e2c7ad99d drm/amdgpu: update ib_start/size_alignment same as windows used
PAGE_SIZE for start_alignment is far much than hw requirement,
And now, update to expereince value from window side.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:17:39 -05:00
Arnd Bergmann
eeb2c3c2a6 amdgpu: display: use modern ktime accessors
getrawmonotonic64() is deprecated because of the nonstandard naming.

The replacement functions ktime_get_raw_ns() also simplifies the callers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:17:38 -05:00
Souptick Joarder
4daa4fba3a gpu: drm: ttm: Adding new return type vm_fault_t
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.

Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")

Previously vm_insert_{mixed,pfn} returns err which driver
mapped into VM_FAULT_* type. The new function
vmf_insert_{mixed,pfn} will replace this inefficiency by
returning VM_FAULT_* type.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:17:38 -05:00
Souptick Joarder
2bfb0b678e gpu: drm: radeon: Adding new typedef vm_fault_t
Use new return type vm_fault_t for fault handler
in vm_operations_struct.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 13:17:38 -05:00
Bart Van Assche
9c24c10a2c Revert "block: Add warning for bi_next not NULL in bio_endio()"
Commit 0ba99ca483 ("block: Add warning for bi_next not NULL in
bio_endio()") breaks the dm driver. end_clone_bio() detects whether
or not a bio is the last bio associated with a request by checking
the .bi_next field. Commit 0ba99ca483 clears that field before
end_clone_bio() has had a chance to inspect that field. Hence revert
commit 0ba99ca483.

This patch avoids that KASAN reports the following complaint when
running the srp-test software (srp-test/run_tests -c -d -r 10 -t 02-mq):

==================================================================
BUG: KASAN: use-after-free in bio_advance+0x11b/0x1d0
Read of size 4 at addr ffff8801300e06d0 by task ksoftirqd/0/9

CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.18.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0xa4/0xf5
 print_address_description+0x6f/0x270
 kasan_report+0x241/0x360
 __asan_load4+0x78/0x80
 bio_advance+0x11b/0x1d0
 blk_update_request+0xa7/0x5b0
 scsi_end_request+0x56/0x320 [scsi_mod]
 scsi_io_completion+0x7d6/0xb20 [scsi_mod]
 scsi_finish_command+0x1c0/0x280 [scsi_mod]
 scsi_softirq_done+0x19a/0x230 [scsi_mod]
 blk_mq_complete_request+0x160/0x240
 scsi_mq_done+0x50/0x1a0 [scsi_mod]
 srp_recv_done+0x515/0x1330 [ib_srp]
 __ib_process_cq+0xa0/0xf0 [ib_core]
 ib_poll_handler+0x38/0xa0 [ib_core]
 irq_poll_softirq+0xe8/0x1f0
 __do_softirq+0x128/0x60d
 run_ksoftirqd+0x3f/0x60
 smpboot_thread_fn+0x352/0x460
 kthread+0x1c1/0x1e0
 ret_from_fork+0x24/0x30

Allocated by task 1918:
 save_stack+0x43/0xd0
 kasan_kmalloc+0xad/0xe0
 kasan_slab_alloc+0x11/0x20
 kmem_cache_alloc+0xfe/0x350
 mempool_alloc_slab+0x15/0x20
 mempool_alloc+0xfb/0x270
 bio_alloc_bioset+0x244/0x350
 submit_bh_wbc+0x9c/0x2f0
 __block_write_full_page+0x299/0x5a0
 block_write_full_page+0x16b/0x180
 blkdev_writepage+0x18/0x20
 __writepage+0x42/0x80
 write_cache_pages+0x376/0x8a0
 generic_writepages+0xbe/0x110
 blkdev_writepages+0xe/0x10
 do_writepages+0x9b/0x180
 __filemap_fdatawrite_range+0x178/0x1c0
 file_write_and_wait_range+0x59/0xc0
 blkdev_fsync+0x46/0x80
 vfs_fsync_range+0x66/0x100
 do_fsync+0x3d/0x70
 __x64_sys_fsync+0x21/0x30
 do_syscall_64+0x77/0x230
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9:
 save_stack+0x43/0xd0
 __kasan_slab_free+0x137/0x190
 kasan_slab_free+0xe/0x10
 kmem_cache_free+0xd3/0x380
 mempool_free_slab+0x17/0x20
 mempool_free+0x63/0x160
 bio_free+0x81/0xa0
 bio_put+0x59/0x60
 end_bio_bh_io_sync+0x5d/0x70
 bio_endio+0x1a7/0x360
 blk_update_request+0xd0/0x5b0
 end_clone_bio+0xa3/0xd0 [dm_mod]
 bio_endio+0x1a7/0x360
 blk_update_request+0xd0/0x5b0
 scsi_end_request+0x56/0x320 [scsi_mod]
 scsi_io_completion+0x7d6/0xb20 [scsi_mod]
 scsi_finish_command+0x1c0/0x280 [scsi_mod]
 scsi_softirq_done+0x19a/0x230 [scsi_mod]
 blk_mq_complete_request+0x160/0x240
 scsi_mq_done+0x50/0x1a0 [scsi_mod]
 srp_recv_done+0x515/0x1330 [ib_srp]
 __ib_process_cq+0xa0/0xf0 [ib_core]
 ib_poll_handler+0x38/0xa0 [ib_core]
 irq_poll_softirq+0xe8/0x1f0
 __do_softirq+0x128/0x60d

The buggy address belongs to the object at ffff8801300e0640
 which belongs to the cache bio-0 of size 200
The buggy address is located 144 bytes inside of
 200-byte region [ffff8801300e0640, ffff8801300e0708)
The buggy address belongs to the page:
page:ffffea0004c03800 count:1 mapcount:0 mapping:ffff88015a563a00 index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 dead000000000100 dead000000000200 ffff88015a563a00
raw: 0000000000000000 0000000000330033 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801300e0580: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc
 ffff8801300e0600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8801300e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                 ^
 ffff8801300e0700: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8801300e0780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Cc: Kent Overstreet <kent.overstreet@gmail.com>
Fixes: 0ba99ca483 ("block: Add warning for bi_next not NULL in bio_endio()")
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-19 11:59:47 -06:00
Mike Marciniszyn
2e2ba09e48 IB/rdmavt, IB/hfi1: Create device dependent s_flags
Move some s_flags defines out of rdmavt and into hfi1 because they are
hfi1 specific and therefore should remain in the driver instead of
bubbling up to rdmavt.

Document device specific ranges in rdmavt and remap
those in hfi1.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19 11:49:46 -06:00
Mike Marciniszyn
32e3d97079 IB/hfi1: Remove rcvhdrsize
The field is based on a constant that can never change.

Use the define to assign the register instead.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19 11:49:46 -06:00
Mike Marciniszyn
40442b30aa IB/hfi1: Move rhf_offset from devdata to ctxtdata
This field should be in ctxtdata to allow for better locality of access by
eliminating a dd dereference.

The new field is now side-by-side with rcvhdrqentsize since the rhf_offset
is a function of the rcvhdrqentsize.

Both fields are now correctly sized as u8.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19 11:49:45 -06:00
Mike Marciniszyn
b0ba3c18d6 IB/hfi1: Move normal functions from hfi1_devdata to const array
The current implementation precludes having receive context specific
packet type receive handlers.

Fix this by adding adding c99 const array for the existing handlers and
remove the current 72 bytes of pointers from devdata.

A new pointer in hfi1_ctxtdata will point to the const array.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19 11:49:45 -06:00
peter enderborg
67b0b4e498 selinux: Cleanup printk logging in netnode
Replace printk with pr_* to avoid checkpatch warnings.

Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 13:49:10 -04:00
peter enderborg
07c81ac2ad selinux: Cleanup printk logging in avc
Replace printk with pr_* to avoid checkpatch warnings.

Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 13:47:13 -04:00
peter enderborg
0d3a115429 selinux: Cleanup printk logging in netif
Replace printk with pr_* to avoid checkpatch warnings.

Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 13:45:31 -04:00
Harry Wentland
d9fda24804 drm/amdgpu: Don't default to DC support for Kaveri and older
We've had a number of users report failures to detect and light up
display with DC with LVDS and VGA. These connector types are not
currently supported with DC. I'd like to add support but unfortunately
don't have a system with LVDS or VGA available.

In order not to cause regressions we should probably fallback to the
non-DC driver for ASICs that support VGA and LVDS.

These ASICs are:
 * Bonaire
 * Kabini
 * Kaveri
 * Mullins

ASIC support can always be force enabled with amdgpu.dc=1

v2: Keep Hawaii on DC
v3: Added Mullins to the list

Cc: stable@vger.kernel.org
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 12:43:53 -05:00
Michel Dänzer
6fa39bc1e0 drm/amdgpu: Use kvmalloc_array for allocating VRAM manager nodes array
It can be quite big, and there's no need for it to be physically
contiguous. This is less likely to fail under memory pressure (has
actually happened while running piglit).

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 12:43:27 -05:00
peter enderborg
d006469d3f selinux: Cleanup printk logging in netport
Replace printk with pr_* to avoid checkpatch warnings.

Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 13:43:01 -04:00
Rajan Vaja
91c822c330 drm/amd/pp: Fix uninitialized variable
Initialize variable to 0 before performing logical OR operation.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Rajan Vaja <rajan.vaja@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-19 12:42:50 -05:00
peter enderborg
b21a695d9c selinux: Cleanup printk logging in sidtab
Replace printk with pr_* to avoid checkpatch warnings.

Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 13:37:58 -04:00
peter enderborg
d85a78334e selinux: Cleanup printk logging in netlink
Replace printk with pr_* to avoid checkpatch warnings.

Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 13:33:05 -04:00
Christoph Hellwig
0cc61e64e2 block: fix timeout changes for legacy request drivers
blk_mq_complete_request can only be called for blk-mq drivers, but when
removing the BLK_EH_HANDLED return value, two legacy request timeout
methods incorrectly got switched to call blk_mq_complete_request.
Call __blk_complete_request instead to reinstance the previous behavior.
For that __blk_complete_request needs to be exported.

Fixes: 1fc2b62e ("scsi_transport_fc: complete requests from ->timeout")
Fixes: 0df0bb08 ("null_blk: complete requests from ->timeout")
Reported-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-19 11:27:18 -06:00