Commit graph

781,636 commits

Author SHA1 Message Date
Simon Guo
533082ae86 KVM: PPC: Book3S PR: Emulate mtspr/mfspr using active TM SPRs
The mfspr/mtspr on TM SPRs(TEXASR/TFIAR/TFHAR) are non-privileged
instructions and can be executed by PR KVM guest in problem state
without trapping into the host. We only emulate mtspr/mfspr
texasr/tfiar/tfhar in guest PR=0 state.

When we are emulating mtspr tm sprs in guest PR=0 state, the emulation
result needs to be visible to guest PR=1 state. That is, the actual TM
SPR val should be loaded into actual registers.

We already flush TM SPRs into vcpu when switching out of CPU, and load
TM SPRs when switching back.

This patch corrects mfspr()/mtspr() emulation for TM SPRs to make the
actual source/dest be the actual TM SPRs.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:30:05 +10:00
Simon Guo
13989b65eb KVM: PPC: Book3S PR: Add math support for PR KVM HTM
The math registers will be saved into vcpu->arch.fp/vr and corresponding
vcpu->arch.fp_tm/vr_tm area.

We flush or giveup the math regs into vcpu->arch.fp/vr before saving
transaction. After transaction is restored, the math regs will be loaded
back into regs.

If there is a FP/VEC/VSX unavailable exception during transaction active
state, the math checkpoint content might be incorrect and we need to do
treclaim./load the correct checkpoint val/trechkpt. sequence to retry the
transaction. That will make our solution complicated. To solve this issue,
we always make the hardware guest MSR math bits (shadow_msr) consistent
with the MSR val which guest sees (kvmppc_get_msr()) when guest msr is
with tm enabled. Then all FP/VEC/VSX unavailable exception can be delivered
to guest and guest handles the exception by itself.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:30:00 +10:00
Simon Guo
8d2e2fc5e0 KVM: PPC: Book3S PR: Add transaction memory save/restore skeleton
The transaction memory checkpoint area save/restore behavior is
triggered when VCPU qemu process is switching out/into CPU, i.e.
at kvmppc_core_vcpu_put_pr() and kvmppc_core_vcpu_load_pr().

MSR TM active state is determined by TS bits:
    active: 10(transactional) or 01 (suspended)
    inactive: 00 (non-transactional)
We don't "fake" TM functionality for guest. We "sync" guest virtual
MSR TM active state(10 or 01) with shadow MSR. That is to say,
we don't emulate a transactional guest with a TM inactive MSR.

TM SPR support(TFIAR/TFAR/TEXASR) has already been supported by
commit 9916d57e64 ("KVM: PPC: Book3S PR: Expose TM registers").
Math register support (FPR/VMX/VSX) will be done at subsequent
patch.

Whether TM context need to be saved/restored can be determined
by kvmppc_get_msr() TM active state:
	* TM active - save/restore TM context
	* TM inactive - no need to do so and only save/restore
TM SPRs.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Suggested-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:55 +10:00
Simon Guo
66c33e796c KVM: PPC: Book3S PR: Add kvmppc_save/restore_tm_sprs() APIs
This patch adds 2 new APIs, kvmppc_save_tm_sprs() and
kvmppc_restore_tm_sprs(), for the purpose of TEXASR/TFIAR/TFHAR
save/restore.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:51 +10:00
Simon Guo
de7ad93219 KVM: PPC: Book3S PR: Add new kvmppc_copyto/from_vcpu_tm APIs
This patch adds 2 new APIs: kvmppc_copyto_vcpu_tm() and
kvmppc_copyfrom_vcpu_tm().  These 2 APIs will be used to copy from/to TM
data between VCPU_TM/VCPU area.

PR KVM will use these APIs for treclaim. or trechkpt. emulation.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:47 +10:00
Simon Guo
36383a0862 KVM: PPC: Book3S PR: Avoid changing TS bits when exiting guest
PR KVM host usually runs with TM enabled in its host MSR value, and
with non-transactional TS value.

When a guest with TM active traps into PR KVM host, the rfid at the
tail of kvmppc_interrupt_pr() will try to switch TS bits from
S0 (Suspended & TM disabled) to N1 (Non-transactional & TM enabled).

That will leads to TM Bad Thing interrupt.

This patch manually sets target TS bits unchanged to avoid this
exception.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:42 +10:00
Simon Guo
401a89e937 KVM: PPC: Book3S PR: Implement RFID TM behavior to suppress change from S0 to N0
According to ISA specification for RFID, in MSR TM disabled and TS
suspended state (S0), if the target MSR is TM disabled and TS state is
inactive (N0), rfid should suppress this update.

This patch makes the RFID emulation of PR KVM consistent with this.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:38 +10:00
Simon Guo
95757bfc72 KVM: PPC: Book3S PR: Sync TM bits to shadow msr for problem state guest
MSR TS bits can be modified with non-privileged instruction such as
tbegin./tend.  That means guest can change MSR value "silently" without
notifying host.

It is necessary to sync the TM bits to host so that host can calculate
shadow msr correctly.

Note, privileged mode in the guest will always fail transactions so we
only take care of problem state mode in the guest.

The logic is put into kvmppc_copy_from_svcpu() so that
kvmppc_handle_exit_pr() can use correct MSR TM bits even when preemption
occurs.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:33 +10:00
Simon Guo
901938add3 KVM: PPC: Book3S PR: Pass through MSR TM and TS bits to shadow_msr
PowerPC TM functionality needs MSR TM/TS bits support in hardware level.
Guest TM functionality can not be emulated with "fake" MSR (msr in magic
page) TS bits.

This patch syncs TM/TS bits in shadow_msr with the MSR value in magic
page, so that the MSR TS value which guest sees is consistent with actual
MSR bits running in guest.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:28 +10:00
Simon Guo
25ddda07b6 KVM: PPC: Book3S PR: Transition to Suspended state when injecting interrupt
This patch simulates interrupt behavior per Power ISA while injecting
interrupt in PR KVM:
- When interrupt happens, transactional state should be suspended.

kvmppc_mmu_book3s_64_reset_msr() will be invoked when injecting an
interrupt. This patch performs this ISA logic in
kvmppc_mmu_book3s_64_reset_msr().

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:22 +10:00
Simon Guo
caa3be92be KVM: PPC: Book3S PR: Add C function wrapper for _kvmppc_save/restore_tm()
Currently __kvmppc_save/restore_tm() APIs can only be invoked from
assembly function. This patch adds C function wrappers for them so
that they can be safely called from C function.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:17 +10:00
Simon Guo
7f386af7bd KVM: PPC: Book3S PR: Turn on FP/VSX/VMX MSR bits in kvmppc_save_tm()
kvmppc_save_tm() invokes store_fp_state/store_vr_state(). So it is
mandatory to turn on FP/VSX/VMX MSR bits for its execution, just
like what kvmppc_restore_tm() did.

Previously HV KVM has turned the bits on outside of function
kvmppc_save_tm().  Now we include this bit change in kvmppc_save_tm()
so that the logic is cleaner. And PR KVM can reuse it later.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:29:12 +10:00
Simon Guo
6f597c6b63 KVM: PPC: Book3S PR: Add guest MSR parameter for kvmppc_save_tm()/kvmppc_restore_tm()
HV KVM and PR KVM need different MSR source to indicate whether
treclaim. or trecheckpoint. is necessary.

This patch add new parameter (guest MSR) for these kvmppc_save_tm/
kvmppc_restore_tm() APIs:
- For HV KVM, it is VCPU_MSR
- For PR KVM, it is current host MSR or VCPU_SHADOW_SRR1

This enhancement enables these 2 APIs to be reused by PR KVM later.
And the patch keeps HV KVM logic unchanged.

This patch also reworks kvmppc_save_tm()/kvmppc_restore_tm() to
have a clean ABI: r3 for vcpu and r4 for guest_msr.

During kvmppc_save_tm/kvmppc_restore_tm(), the R1 need to be saved
or restored. Currently the R1 is saved into HSTATE_HOST_R1. In PR
KVM, we are going to add a C function wrapper for
kvmppc_save_tm/kvmppc_restore_tm() where the R1 will be incremented
with added stackframe and save into HSTATE_HOST_R1. There are several
places in HV KVM to load HSTATE_HOST_R1 as R1, and we don't want to
bring risk or confusion by TM code.

This patch will use HSTATE_SCRATCH2 to save/restore R1 in
kvmppc_save_tm/kvmppc_restore_tm() to avoid future confusion, since
the r1 is actually a temporary/scratch value to be saved/stored.

[paulus@ozlabs.org - rebased on top of 7b0e827c69 ("KVM: PPC: Book3S HV:
 Factor fake-suspend handling out of kvmppc_save/restore_tm", 2018-05-30)]

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-06-01 10:27:59 +10:00
Rasmus Villemoes
f0907827a8 compiler.h: enable builtin overflow checkers and add fallback code
This adds wrappers for the __builtin overflow checkers present in gcc
5.1+ as well as fallback implementations for earlier compilers. It's not
that easy to implement the fully generic __builtin_X_overflow(T1 a, T2
b, T3 *d) in macros, so the fallback code assumes that T1, T2 and T3 are
the same. We obviously don't want the wrappers to have different
semantics depending on $GCC_VERSION, so we also insist on that even when
using the builtins.

There are a few problems with the 'a+b < a' idiom for checking for
overflow: For signed types, it relies on undefined behaviour and is
not actually complete (it doesn't check underflow;
e.g. INT_MIN+INT_MIN == 0 isn't caught). Due to type promotion it
is wrong for all types (signed and unsigned) narrower than
int. Similarly, when a and b does not have the same type, there are
subtle cases like

  u32 a;

  if (a + sizeof(foo) < a)
    return -EOVERFLOW;
  a += sizeof(foo);

where the test is always false on 64 bit platforms. Add to that that it
is not always possible to determine the types involved at a glance.

The new overflow.h is somewhat bulky, but that's mostly a result of
trying to be type-generic, complete (e.g. catching not only overflow
but also signed underflow) and not relying on undefined behaviour.

Linus is of course right [1] that for unsigned subtraction a-b, the
right way to check for overflow (underflow) is "b > a" and not
"__builtin_sub_overflow(a, b, &d)", but that's just one out of six cases
covered here, and included mostly for completeness.

So is it worth it? I think it is, if nothing else for the documentation
value of seeing

  if (check_add_overflow(a, b, &d))
    return -EGOAWAY;
  do_stuff_with(d);

instead of the open-coded (and possibly wrong and/or incomplete and/or
UBsan-tickling)

  if (a+b < a)
    return -EGOAWAY;
  do_stuff_with(a+b);

While gcc does recognize the 'a+b < a' idiom for testing unsigned add
overflow, it doesn't do nearly as good for unsigned multiplication
(there's also no single well-established idiom). So using
check_mul_overflow in kcalloc and friends may also make gcc generate
slightly better code.

[1] https://lkml.org/lkml/2015/11/2/658

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-31 16:41:41 -07:00
Russell King
10573ae547 ARM: spectre-v1: fix syscall entry
Prevent speculation at the syscall table decoding by clamping the index
used to zero on invalid system call numbers, and using the csdb
speculative barrier.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
2018-05-31 23:27:26 +01:00
Russell King
1d4238c56f ARM: spectre-v1: add array_index_mask_nospec() implementation
Add an implementation of the array_index_mask_nospec() function for
mitigating Spectre variant 1 throughout the kernel.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
2018-05-31 23:27:21 +01:00
Russell King
a78d156587 ARM: spectre-v1: add speculation barrier (csdb) macros
Add assembly and C macros for the new CSDB instruction.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
2018-05-31 23:27:16 +01:00
Linus Torvalds
0512e01345 Changes since last update:
- Clear out i_mapping error state when we're reinitializing inodes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAlsPY0wACgkQ+H93GTRK
 tOuuDQ/+IvBngJL9I5py7GF0EXlMuge0nAulEj4d1ZT4tNCPp0Ouu4Jy+za+RapQ
 w604fvI6VPPbtidjLpUkR+ZzVeIAanaUkHY+MXl7DEYnyKC+VO7rPZUQiXe4kCeE
 ExNpL063vj4FND3xO/tXz2cs6Wjk8RuCLPWprLVKPpZ79w+BQwYFlpKGschMhR7w
 EQM+7TIJHff1C2nwETbX5ZcM6yxo6PVUwxEsF7+pubVulMoJZ57m5OnS7RXZY7L7
 33S3du85A/Unby+mlYQTsmWf+1FOfIIf6+r1i13gRorGSZongPSenQdO6h4uKzXc
 3OHXTl783ip2cFhhbbTnDlmly66Q1wcDwUDd88YvP94Wv9K+lWASKJGqDwpT/T3/
 gkmg9pTXezPytTZb+F86nFN91b4NWSdskwN4/Du2ydnSEQVmzwdYLyc1oQn9IWal
 HITBlVApLF33rHgmPJXRT64uKPqsPttu3DR5337waTPKf8po+Xk7CaATIIHx8gTD
 Jj8UfH7b9u7tjk5yXnx7qVCquwsG1E8N3Xi5eqn2dsTVSqia3vjyBoI7esPX5DBO
 ZvbBuU5MMmGr0p7DCEcFbe/otToqdoc0quebuUodKbhUS70+RGDoqwfR+R7Gbprq
 M6+Tfm7S6DIKOsfgde5HBEEAjQtsrNMNdBsBemtL1v3fzI6SyJQ=
 =UtGb
 -----END PGP SIGNATURE-----

Merge tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fix from Darrick Wong:
 "Clear out i_mapping error state when we're reinitializing inodes.

  This last minute fix prevents writeback error state from persisting
  past the end of the in-core inode lifecycle and causing EIO errors to
  be reported to userspace when no error has occurred.

  This fix for the behavioral regression has been soaking in for-next
  for a while, but various fs developers persuaded me to try to get it
  upstream for 4.17 because the patch that broke things was introduced
  in 4.17-rc4"

* tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs: clear writeback errors in inode_init_always
2018-05-31 16:23:07 -05:00
Arnd Bergmann
53e39628ac i2c: qup: fix building without CONFIG_ACPI
The added Centriq support broke compilation with CONFIG_ACPI disabled:

drivers/i2c/busses/i2c-qup.c: In function 'qup_i2c_probe':
drivers/i2c/busses/i2c-qup.c:1707:25: error: 'qup_i2c_acpi_match' undeclared (first use in this function); did you mean 'qup_i2c_recv_data'?

This fixes it by removing the extraneous #ifdef. All ACPI specific
code will be dropped implicitly when that option is disabled, but
the compiler first needs to see it.

Fixes: 902a91a02b ("i2c: qup: add probe path for Centriq ACPI devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Austin Christ <austinwc@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-31 23:21:00 +02:00
Alexandre Belloni
696fa1d043 rtc: test: remove irq sysfs file
Now that alarms are emulated, remove the irq sysfs file that could be used
to send alarms.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:13:31 +02:00
Alexandre Belloni
8be0902994 rtc: test: emulate alarms using timers
Use timers to emulate alarms. Note that multiple alarms may happen if they
are set more than 15 days after the current RTC time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:13:29 +02:00
Alexandre Belloni
4dc2403bed rtc: test: store time as an offset to system time
Store the time as an offset to system time. As the offset is in second, it
is currently always synced with system time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:13:28 +02:00
Alexandre Belloni
5b257571cd rtc: test: allow registering many devices
Use a loop to register RTC devices

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:13:26 +02:00
Alexandre Belloni
9394270ef9 rtc: test: remove useless proc info
The rtc proc callback is useless for two reasosn:
 - the test RTC is often not the first RTC so it will never be used
 - all the info is available in the name file of the RTC sys folder

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:13:25 +02:00
Alexandre Belloni
c36b52ed18 rtc: ds1685: Add range
Useful range is 2000-2099 because leap year fails on centuries.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:02:11 +02:00
Alexandre Belloni
a2ae8323a8 rtc: ds1685: fix possible race condition
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:02:11 +02:00
Baolin Wang
a0defd7cfc rtc: sprd: Add new RTC power down check method
We should use the new method to check if RTC was powered down, which
is more solid. Since we have introduced power control and power status
registers, and we just check if the power status is the default value
(0x96), if yes that means the RTC has been powered down. Meanwhile We
can set the power control register to be one valid value to change
the power status to indicate RTC device is valid now.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:02:11 +02:00
Michael Trimarchi
09018d4bd7 rtc: sun6i: Fix bit_idx value for clk_register_gate
clk-gate core will take bit_idx through clk_register_gate
and then do clk_gate_ops by using BIT(bit_idx), but rtc-sun6i
is passing bit_idx as BIT(bit_idx) it becomes BIT(BIT(bit_idx)
which is wrong and eventually external gate clock is not enabling.

This patch fixed by passing bit index and the original change
introduced from below commit.
"rtc: sun6i: Add support for the external oscillator gate"
(sha1: 	17ecd24641)

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Fixes: 17ecd24641 ("rtc: sun6i: Add support for the external oscillator gate")
Cc: stable@vger.kernel.org
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:02:11 +02:00
Mathieu Malaterre
b9ef86084d rtc: jz4740: Fix a typo in Kconfig
Fix typo introduced for RTC_DRV_JZ4740 in commit 586655d278 ("rtc:
jz4740: make the driver buildable as a module again").

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31 23:02:11 +02:00
Dan Carpenter
8005b09d99 net: ethernet: davinci_emac: fix error handling in probe()
The current error handling code has an issue where it does:

	if (priv->txchan)
		cpdma_chan_destroy(priv->txchan);

The problem is that ->txchan is either valid or an error pointer (which
would lead to an Oops).  I've changed it to use multiple error labels so
that the test can be removed.

Also there were some missing calls to netif_napi_del().

Fixes: 3ef0fdb234 ("net: davinci_emac: switch to new cpdma layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 16:12:00 -04:00
Samuel Mendoza-Jonas
0f51f3582f net/ncsi: Fix array size in dumpit handler
With CONFIG_CC_STACKPROTECTOR enabled the kernel panics as below when
parsing a NCSI_CMD_PKG_INFO command:

[  150.149711] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08
[  150.149711]
[  150.159919] CPU: 0 PID: 1301 Comm: ncsi-netlink Not tainted 4.13.16-468cbec6d2c91239332cb91b1f0a73aafcb6f0c6 #1
[  150.170004] Hardware name: Generic DT based system
[  150.174852] [<80109930>] (unwind_backtrace) from [<80106bc4>] (show_stack+0x20/0x24)
[  150.182641] [<80106bc4>] (show_stack) from [<805d36e4>] (dump_stack+0x20/0x28)
[  150.189888] [<805d36e4>] (dump_stack) from [<801163ac>] (panic+0xdc/0x278)
[  150.196780] [<801163ac>] (panic) from [<801162cc>] (__stack_chk_fail+0x20/0x24)
[  150.204111] [<801162cc>] (__stack_chk_fail) from [<805cff08>] (ncsi_pkg_info_all_nl+0x244/0x258)
[  150.212912] [<805cff08>] (ncsi_pkg_info_all_nl) from [<804f939c>] (genl_lock_dumpit+0x3c/0x54)
[  150.221535] [<804f939c>] (genl_lock_dumpit) from [<804f873c>] (netlink_dump+0xf8/0x284)
[  150.229550] [<804f873c>] (netlink_dump) from [<804f8d44>] (__netlink_dump_start+0x124/0x17c)
[  150.237992] [<804f8d44>] (__netlink_dump_start) from [<804f9880>] (genl_rcv_msg+0x1c8/0x3d4)
[  150.246440] [<804f9880>] (genl_rcv_msg) from [<804f9174>] (netlink_rcv_skb+0xd8/0x134)
[  150.254361] [<804f9174>] (netlink_rcv_skb) from [<804f96a4>] (genl_rcv+0x30/0x44)
[  150.261850] [<804f96a4>] (genl_rcv) from [<804f7790>] (netlink_unicast+0x198/0x234)
[  150.269511] [<804f7790>] (netlink_unicast) from [<804f7ffc>] (netlink_sendmsg+0x368/0x3b0)
[  150.277783] [<804f7ffc>] (netlink_sendmsg) from [<804abea4>] (sock_sendmsg+0x24/0x34)
[  150.285625] [<804abea4>] (sock_sendmsg) from [<804ac1dc>] (___sys_sendmsg+0x244/0x260)
[  150.293556] [<804ac1dc>] (___sys_sendmsg) from [<804ad98c>] (__sys_sendmsg+0x5c/0x9c)
[  150.301400] [<804ad98c>] (__sys_sendmsg) from [<804ad9e4>] (SyS_sendmsg+0x18/0x1c)
[  150.308984] [<804ad9e4>] (SyS_sendmsg) from [<80102640>] (ret_fast_syscall+0x0/0x3c)
[  150.316743] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08

This turns out to be because the attrs array in ncsi_pkg_info_all_nl()
is initialised to a length of NCSI_ATTR_MAX which is the maximum
attribute number, not the number of attributes.

Fixes: 955dc68cb9 ("net/ncsi: Add generic netlink family")
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:57:54 -04:00
Andrew Lunn
7bb8c9969d net: dsa: mv88e6xxx: Be explicit about DT or pdata
Make it explicit that either device tree is used or platform data.  If
neither is available, abort the probe.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 877b7cb0b6 ("net: dsa: mv88e6xxx: Add minimal platform_data support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:54:32 -04:00
Arnd Bergmann
e2b3e49378 net: ti: cpsw: include gpio/consumer.h
On platforms that don't always enable CONFIG_GPIOLIB, we run into
a build failure:

drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_probe':
drivers/net/ethernet/ti/cpsw.c:3006:9: error: implicit declaration of function 'devm_gpiod_get_array_optional' [-Werror=implicit-function-declaration]
  mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/ti/cpsw.c:3006:59: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
  mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW);

Since we cannot rely on this to be visible from gpio.h, we have to include
gpio/consumer.h directly.

Fixes: 2652113ff0 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:46:41 -04:00
David S. Miller
b009f1a2fe Merge branch 'mlx5-new-device-events'
Saeed Mahameed says:

====================
Mellanox, mlx5 new device events

The following series is for mlx5-next tree [1], it adds the support of two
new device events, from Ilan Tayari:

1. High temperature warnings.
2. FPGA QP error event.

In case of no objection this series will be applied to mlx5-next tree
and will be sent later as a pull request to both rdma and net trees.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git/log/?h=mlx5-next

v1->v2:
  - improve commit message of the FPGA QP error event patch.
====================

Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:35:39 -04:00
Ilan Tayari
1f0cf89b09 net/mlx5: Add FPGA QP error event
The FPGA queue pair (QP) event fires whenever a QP on the FPGA
transitions to the error state.

At this stage, this event is unrecoverable, it may become recoverable
in the future.

Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:35:38 -04:00
Ilan Tayari
1865ea9adb net/mlx5: Add temperature warning event to log
Temperature warning event is sent by FW to indicate high temperature
as detected by one of the sensors on the board.
Add handling of this event by writing the numbers of the alert sensors
to the kernel log.

Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:35:37 -04:00
David S. Miller
be20f28fbd wireless-drivers fixes for 4.17
Two last minute fixes, hopefully they make it to 4.17 still.
 
 rt2x00
 
 * revert a fix which caused even more problems
 
 iwlwifi
 
 * fix a crash when there are 16 or more logical CPUs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJbDq9KAAoJEG4XJFUm622bdFkIAIkIFEEC7TU3p5ud8YDUSOl/
 6MBX/QFSTsFiyWL44YbH+0fU9vBla1oQuOtw+LFyr+te8OOLZzczdb30xUS+/tj0
 O/LNMvNZ/TtvRl92Plj7ZcPmbDVa4UAABKL4ZKOjPP7EKdrCFQMLJ92IdHny+PW0
 cwOwR5kmcTUgUHzHJ3D/g4M/TIz9UOgGFf1ET5+XiaYR9no84fQEXxDtBgMiNPvH
 dCR8naiWliq3Zjyfc7nBSMKOk9bOlxRSUPQrjxYN/cLFZEzJJOIU8oSIacgvaYw9
 DcZdwJn3BCOiWBihTPr5nzwsdvWOVNE2zc991IqqduhkkzcJdo0CPoTmnh604ZY=
 =PSVv
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-for-davem-2018-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.17

Two last minute fixes, hopefully they make it to 4.17 still.

rt2x00

* revert a fix which caused even more problems

iwlwifi

* fix a crash when there are 16 or more logical CPUs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:27:39 -04:00
Donald Sharp
35aada99b5 rtnetlink: Add more well known protocol values
FRRouting installs routes into the kernel associated with
the originating protocol.  Add these values to the well
known values in rtnetlink.h.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:25:10 -04:00
Ganesh Goudar
c5f732d7de cxgb4: Add FORCE_PAUSE bit to 32 bit port caps
Add FORCE_PAUSE bit to force local pause settings instead
of using auto negotiated values.

Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:23:26 -04:00
Paul Blakey
8258d2da9f cls_flower: Fix incorrect idr release when failing to modify rule
When we fail to modify a rule, we incorrectly release the idr handle
of the unmodified old rule.

Fix that by checking if we need to release it.

Fixes: fe2502e49b ("net_sched: remove cls_flower idr on failure")
Reported-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31 15:18:44 -04:00
Shaoyun Liu
7ba01f9e12 drm/amdgpu: Fix NULL pointer when load kfd driver with PP block is disabled
When PP block is disabled, return a fix value(100M) for mclk and sclk on
bare-metal mode. This will cover the emulation mode as well.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-31 14:08:54 -05:00
Feifei Xu
ac26b0f3fc drm/gfx9: Update gc goldensetting for vega20.
Update mmCB_DCC_CONFIG register goldensetting.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-31 14:08:33 -05:00
Rex Zhu
46defdd6ff drm/amd/pp: Allow underclocking when od table is empty in vbios
if max od engine clock limit and memory clock limit are not set
in vbios. driver will allow underclocking instand of disable od feature
completely.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-31 14:07:46 -05:00
Trond Myklebust
ae55e59da0 pnfs: Don't release the sequence slot until we've processed layoutget on open
If the server recalls the layout that was just handed out, we risk hitting
a race as described in RFC5661 Section 2.10.6.3 unless we ensure that we
release the sequence slot after processing the LAYOUTGET operation that
was sent as part of the OPEN compound.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31 15:03:12 -04:00
Trond Myklebust
32f1c28f3d pnfs: Don't call commit on failed layoutget-on-open
If the layoutget on open call failed, we can't really commit the inode,
so don't bother calling it.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31 15:03:12 -04:00
Trond Myklebust
64294b08f9 pNFS: Don't send LAYOUTGET on OPEN for read, if we already have cached data
If we're only opening the file for reading, and the file is empty and/or
we already have cached data, then heuristically optimise away the
LAYOUTGET.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31 15:03:12 -04:00
Trond Myklebust
8dc96566c0 NFSv4/pnfs: Don't switch off layoutget-on-open for transient errors
Ensure that we only switch off the LAYOUTGET operation in the OPEN
compound when the server is truly broken, and/or it is complaining
that the compound is too large.
Currently, we end up turning off the functionality permanently,
even for transient errors such as EACCES or ENOSPC.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31 15:03:11 -04:00
Trond Myklebust
d49e0d5b99 NFSv4/pnfs: Ensure pnfs_parse_lgopen() won't try to parse uninitialised data
We need to ensure that pnfs_parse_lgopen() doesn't try to parse a
struct nfs4_layoutget_res that was not filled by a successful call
to decode_layoutget(). This can happen if we performed a cached open,
or if either the OP_ACCESS or OP_GETATTR operations preceding the
OP_LAYOUTGET in the compound returned an error.

By initialising the 'status' field to NFS4ERR_DELAY, we ensure that
pnfs_parse_lgopen() won't try to interpret the structure.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31 15:03:11 -04:00
Fred Isaman
30ae2412e9 pnfs: Fix manipulation of NFS_LAYOUT_FIRST_LAYOUTGET
The flag was not always being cleared after LAYOUTGET on OPEN.

Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31 15:03:11 -04:00
Fred Isaman
c49b5209f9 pnfs: Add barrier to prevent lgopen using LAYOUTGET during recall
Since the LAYOUTGET on OPEN can be sent without prior inode information,
existing methods to prevent LAYOUTGET from being sent while processing
CB_LAYOUTRECALL don't work.  Track if a recall occurred while LAYOUTGET
was being sent, and if so ignore the results.

Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31 15:03:11 -04:00