Commit graph

781,636 commits

Author SHA1 Message Date
Hans de Goede
8e3ebf5e8f
ASoC: rt5640: Remove unused rt5640_platform_data
There are no in tree users of platform-data for the rt5640 codec driver,
so lets remove support for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-11 11:22:34 +09:00
Hans de Goede
e9e7a3bdcd
ASoC: rt5640: Add devicetree-bindings for dmic, jack-detect
Add devicetree-bindings for the dmic, jack-detect source and overcurrent-
detect threshold settings.

The dmic bindings mirror the existing bindings for the rt5645.
The jd-src and ovcd bindings mirror the existing bindings for the rt5651.

Cc devicetree@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-11 11:22:03 +09:00
Hans de Goede
8e7a1f1f17
ASoC: rt5640: Remove is_sys_clk_from_pll, it has ordering issues
is_sys_clk_from_pll() is used as a snd_soc_dapm_route.connected callback,
checking RT5640_GBL_CLK to determine if the sys-clk is PLL1 and thus the
PWR_PLL bit in reg PWR_ANLG2 must be set.

RT5640_GBL_CLK is changed by rt5640_set_dai_sysclk(), which gets called by
the pre_pmu / post_pmd functions of the "Platform Clock" dapm-supply.

This creates an ordering issue, during a dapm transition first all
connected() callbacks are called to build a list of supplies to enable
and then the complete list is walked to enable the supplies. Since the
connected() check happens before enabling any supplies,
is_sys_clk_from_pll() ends up deciding if the PWR_PLL bit should be set
based on the state the "Platform Clock" supply had *before* the transition.
This sometimes results in PWR_PLL being off, even though *after* the
transition PLL1 is configured as sys-clk.

This commit removes is_sys_clk_from_pll() instead simply setting / clearing
PWR_PLL in rt5640_set_dai_sysclk() based on the selected sys-clk, which
fixes this and as a bonus results in a nice cleanup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-11 11:21:42 +09:00
Colin Ian King
d165b5a86f
ASoC: zx-i2s: fix spelling mistake: "timeing" -> "timing"
Trivial fix to spelling mistake in dev_err message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-11 11:05:01 +09:00
Zhang Rui
60abce9f43 Merge branch 'thermal-soc' into next 2018-05-11 09:37:21 +08:00
Jann Horn
0a0b987344 compat: fix 4-byte infoleak via uninitialized struct field
Commit 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to
native counterparts") removed the memset() in compat_get_timex().  Since
then, the compat adjtimex syscall can invoke do_adjtimex() with an
uninitialized ->tai.

If do_adjtimex() doesn't write to ->tai (e.g.  because the arguments are
invalid), compat_put_timex() then copies the uninitialized ->tai field
to userspace.

Fix it by adding the memset() back.

Fixes: 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-10 17:51:58 -07:00
Dave Airlie
72777fe797 Merge branch 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Single amdgpu regression fix

* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/pp: Fix performance drop on Fiji
2018-05-11 10:37:17 +10:00
Steve French
6e70c267e6 smb3: directory sync should not return an error
As with NFS, which ignores sync on directory handles,
fsync on a directory handle is a noop for CIFS/SMB3.
Do not return an error on it.  It breaks some database
apps otherwise.

Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-05-10 19:21:14 -05:00
Oleg Ivanov
35ee52bea6 ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus
The Tronsmart MXIII Plus is an Android TV box which uses the Amlogic
S812 (Meson8m2) SoC. It uses a Realtek RTL8211F RGMII Ethernet PHY as
well as a Ricoh RN5T618 system power controller. It also comes with an
Ampak AP6330 SDIO wifi/Bluetooth combo chip (support for wifi and
Bluetooth is currently not added because the Linux drivers currently
only support one MMC controller and that is used for the SD card).

Signed-off-by: Oleg Ivanov <balbes-150@yandex.ru>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-10 17:03:28 -07:00
Martin Blumenstingl
e981e459af ARM: dts: meson8: add the uart_A pins
This adds the pins for uart_A, which is used to connect to the Bluetooth
module on some devices.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-10 17:03:28 -07:00
Martin Blumenstingl
e592f6585c ARM: dts: meson: add support for the Meson8m2 SoC
This adds a meson8m2.dtsi which simply inherits meson8.dtsi as both SoCs
share most peripherals.
The known differences are:
- Meson8m2's hardware video decoder additionally supports H.265 decoding
- Meson8m2 has the same Gigabit MAC as Meson8b (instead of the 10/100M
  MAC that Meson8 uses)
- Meson8m2 uses the same watchdog register layout/bits as Meson8b (using
  the Meson8 watchdog compatible leads to an infinite hang when
  rebooting the machine)
- Meson8m2 uses the same SAR ADC register layout/bits as Meson8b.
  However, it uses the temperature sensor calibration formula (and
  registers) Meson8b which differ from Meson8. This however is currently
  not supported by the meson-saradc driver yet.
- the pin controller is mostly compatible with Meson8, Meson8m2 has
  an additional function on eight pins and removes the "VGA" function.
  So there's a total of 10 pins which are slightly changed, which is why
  there's a separate compatible for the pin controller
- a separate compatible for the clock controller is used because at
  least the Mali clock tree (not supported yet) is the same as on GXBB
  while Meson8 and Meson8b have a reduced/older version of the Mali
  clock tree.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-10 17:03:28 -07:00
Martin Blumenstingl
0633d20fea ARM: meson: add support for the Meson8m2 SoCs
Add the newly introduced compatible string for the Meson8m2 SoC.
The existing Meson8 Kconfig entry is updated to also provide support for
the Meson8m2 SoCs. The Meson8m2 SoC is mostly identical to the Meson8 SoC
with just a few peripherals being updated. Both SoCs currently
share the same pinctrl, clock and GPIO IRQ bindings. Thus the existing
Kconfig entry is re-used to avoid duplication (the only cost is building
a few extra DTBs).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-05-10 17:03:28 -07:00
Daniel Borkmann
a84880ef43 Merge branch 'bpf-perf-rb-libbpf'
Jakub Kicinski says:

====================
This series started out as a follow up to the bpftool perf event dumping
patches.

As suggested by Daniel patch 1 makes use of PERF_SAMPLE_TIME to simplify
code and improve accuracy of timestamps.

Remaining patches are trying to move perf event loop into libbpf as
suggested by Alexei.  One user for this new function is bpftool which
links with libbpf nicely, the other, unfortunately, is in samples/bpf.
Remaining patches make samples/bpf link against full libbpf.a (not just
a handful of objects).  Once we have full power of libbpf at our disposal
we can convert some of XDP samples to use libbpf loader instead of
bpf_load.c.  My understanding is that this is the desired direction,
at least for networking code.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:48:32 +02:00
Jakub Kicinski
be5bca44aa samples: bpf: convert some XDP samples from bpf_load to libbpf
Now that we can use full powers of libbpf in BPF samples, we
should perhaps make the simplest XDP programs not depend on
bpf_load helpers.  This way newcomers will be exposed to the
recommended library from the start.

Use of bpf_prog_load_xattr() will also make it trivial to later
on request offload of the programs by simply adding ifindex to
the xattr.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:44:17 +02:00
Jakub Kicinski
17387dd5ac tools: bpf: don't complain about no kernel version for networking code
BPF programs only have to specify the target kernel version for
tracing related hooks, in networking world that requirement does
not really apply.  Loosen the checks in libbpf to reflect that.

bpf_object__open() users will continue to see the error for backward
compatibility (and because prog_type is not available there).

Error code for NULL file name is changed from ENOENT to EINVAL,
as it seems more appropriate, hopefully, that's an OK change.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:40:52 +02:00
Jakub Kicinski
2eb57bb8f6 tools: bpf: improve comments in libbpf.h
Fix spelling mistakes, improve and clarify the language of comments
in libbpf.h.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:40:52 +02:00
Jakub Kicinski
d0cabbb021 tools: bpf: move the event reading loop to libbpf
There are two copies of event reading loop - in bpftool and
trace_helpers "library".  Consolidate them and move the code
to libbpf.  Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:40:52 +02:00
Jakub Kicinski
5f9380572b samples: bpf: compile and link against full libbpf
samples/bpf currently cherry-picks object files from tools/lib/bpf
to link against.  Just compile the full library and link statically
against it.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:40:52 +02:00
Jakub Kicinski
74662ea5d4 samples: bpf: rename struct bpf_map_def to avoid conflict with libbpf
Both tools/lib/bpf/libbpf.h and samples/bpf/bpf_load.h define their
own version of struct bpf_map_def.  The version in bpf_load.h has
more fields.  libbpf does not support inner maps and its definition
of struct bpf_map_def lacks the related fields.  Rename the definition
in bpf_load.h (samples/bpf) to avoid conflicts.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:40:51 +02:00
Jakub Kicinski
e3687510fc tools: bpftool: use PERF_SAMPLE_TIME instead of reading the clock
Ask the kernel to include sample time in each even instead of
reading the clock.  This is also more accurate because our
clock reading was done when user space would dump the buffer,
not when sample was produced.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:40:51 +02:00
Prashant Bhole
cb9c28ef57 bpf: sync tools bpf.h uapi header
Sync the header from include/uapi/linux/bpf.h which was updated to add
fib lookup helper function. This fixes selftests/bpf build failure.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:35:25 +02:00
Joe Stringer
91bc07c9e8 selftests/bpf: Fix bash reference in Makefile
'|& ...' is a bash 4.0+ construct which is not guaranteed to be available
when using '$(shell ...)' in a Makefile. Fall back to the more portable
'2>&1 | ...'.

Fixes the following warning during compilation:

	/bin/sh: 1: Syntax error: "&" unexpected

Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 01:32:07 +02:00
Roi Dayan
f85900c3e1 net/mlx5e: Err if asked to offload TC match on frag being first
The HW doesn't support matching on frag first/later, return error if we are
asked to offload that.

Fixes: 3f7d0eb42d ("net/mlx5e: Offload TC matching on packets being IP fragments")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-10 16:10:13 -07:00
Adi Nissim
88d725bbb4 net/mlx5: E-Switch, Include VF RDMA stats in vport statistics
The host side reporting of VF vport statistics didn't include the VF
RDMA traffic.

Fixes: 3b751a2a41 ("net/mlx5: E-Switch, Introduce get vf statistics")
Signed-off-by: Adi Nissim <adin@mellanox.com>
Reported-by: Ariel Almog <ariela@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-10 16:10:13 -07:00
Daniel Jurgens
1ef903bf79 net/mlx5: Free IRQs in shutdown path
Some platforms require IRQs to be free'd in the shutdown path. Otherwise
they will fail to be reallocated after a kexec.

Fixes: 8812c24d28 ("net/mlx5: Add fast unload support in shutdown flow")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-10 16:10:03 -07:00
Gil Kupfer
cef74409ea PCI: Add "pci=noats" boot parameter
Adds a "pci=noats" boot parameter.  When supplied, all ATS related
functions fail immediately and the IOMMU is configured to not use
device-IOTLB.

Any function that checks for ATS capabilities directly against the devices
should also check this flag.  Currently, such functions exist only in IOMMU
drivers, and they are covered by this patch.

The motivation behind this patch is the existence of malicious devices.
Lots of research has been done about how to use the IOMMU as protection
from such devices.  When ATS is supported, any I/O device can access any
physical address by faking device-IOTLB entries.  Adding the ability to
ignore these entries lets sysadmins enhance system security.

Signed-off-by: Gil Kupfer <gilkup@cs.technion.ac.il>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
2018-05-10 17:56:02 -05:00
David Howells
6b47fe1d1c rxrpc: Trace UDP transmission failure
Add a tracepoint to log transmission failure from the UDP transport socket
being used by AF_RXRPC.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-10 23:26:01 +01:00
David Howells
494337c918 rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages
Add a tracepoint to log received ICMP/ICMP6 events and other error
messages.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-10 23:26:01 +01:00
David Howells
93864fc3ff rxrpc: Fix the min security level for kernel calls
Fix the kernel call initiation to set the minimum security level for kernel
initiated calls (such as from kAFS) from the sockopt value.

Fixes: 19ffa01c9c ("rxrpc: Use structs to hold connection params and protocol info")
Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-10 23:26:01 +01:00
David Howells
f2aeed3a59 rxrpc: Fix error reception on AF_INET6 sockets
AF_RXRPC tries to turn on IP_RECVERR and IP_MTU_DISCOVER on the UDP socket
it just opened for communications with the outside world, regardless of the
type of socket.  Unfortunately, this doesn't work with an AF_INET6 socket.

Fix this by turning on IPV6_RECVERR and IPV6_MTU_DISCOVER instead if the
socket is of the AF_INET6 family.

Without this, kAFS server and address rotation doesn't work correctly
because the algorithm doesn't detect received network errors.

Fixes: 75b54cb57c ("rxrpc: Add IPv6 support")
Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-10 23:26:00 +01:00
David Howells
c54e43d752 rxrpc: Fix missing start of call timeout
The expect_rx_by call timeout is supposed to be set when a call is started
to indicate that we need to receive a packet by that point.  This is
currently put back every time we receive a packet, but it isn't started
when we first send a packet.  Without this, the call may wait forever if
the server doesn't deign to reply.

Fix this by setting the timeout upon a successful UDP sendmsg call for the
first DATA packet.  The timeout is initiated only for initial transmission
and not for subsequent retries as we don't want the retry mechanism to
extend the timeout indefinitely.

Fixes: a158bdd324 ("rxrpc: Fix call timeouts")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-10 23:26:00 +01:00
Jakub Kicinski
3597683c9d tools: bpf: handle NULL return in bpf_prog_load_xattr()
bpf_object__open() can return error pointer as well as NULL.
Fix error handling in bpf_prog_load_xattr() (and indirectly
bpf_prog_load()).

Fixes: 6f6d33f3b3 ("bpf: selftests add sockmap tests")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:20:53 +02:00
Daniel Borkmann
ff1f56d987 Merge branch 'bpf-fib-lookup-helper'
David Ahern says:

====================
Provide a helper for doing a FIB and neighbor lookup in the kernel
tables from an XDP program. The helper provides a fastpath for forwarding
packets. If the packet is a local delivery or for any reason is not a
simple lookup and forward, the packet is expected to continue up the stack
for full processing.

The response from a FIB and neighbor lookup is either the egress index
with the bpf_fib_lookup struct filled in with dmac and gateway or
0 meaning the packet should continue up the stack. In time we can
revisit this to return the FIB lookup result errno if it is one of the
special RTN_'s such as RTN_BLACKHOLE (-EINVAL) so that the XDP
programs can do an early drop if desired.

Patches 1-6 do some more refactoring to IPv6 with the end goal of
extracting a FIB lookup function that aligns with fib_lookup for IPv4,
basically returning a fib6_info without creating a dst based entry.

Patch 7 adds lookup functions to the ipv6 stub. These are needed since
bpf is built into the kernel and ipv6 may not be built or loaded.

Patch 8 adds the bpf helper and 9 adds a sample program.

v3
- remove ETH_ALEN and in6_addr from uapi header

v2
- removed pkt_access from bpf_func_proto as noticed by Daniel
- added check in that IPv6 forwarding is enabled
- added DaveM's ack on patches 1-7 and 9 based on v1 response and
  fact that no changes were made to them in v2

v1
- updated commit messages and cover letter
- added comment to sample program noting lack of verification on
  egress device supporting XDP

RFC v2
- fixed use of foward helper from cls_act as noted by Daniel
- in patch 1 rename fib6_lookup_1 as well for consistency
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:59 +02:00
David Ahern
fe616055f7 samples/bpf: Add example of ipv4 and ipv6 forwarding in XDP
Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.

Take this only as a simple example of fast-path forwarding.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:57 +02:00
David Ahern
87f5fc7e48 bpf: Provide helper to do forwarding lookups in kernel FIB table
Provide a helper for doing a FIB and neighbor lookup in the kernel
tables from an XDP program. The helper provides a fastpath for forwarding
packets. If the packet is a local delivery or for any reason is not a
simple lookup and forward, the packet continues up the stack.

If it is to be forwarded, the forwarding can be done directly if the
neighbor is already known. If the neighbor does not exist, the first
few packets go up the stack for neighbor resolution. Once resolved, the
xdp program provides the fast path.

On successful lookup the nexthop dmac, current device smac and egress
device index are returned.

The API supports IPv4, IPv6 and MPLS protocols, but only IPv4 and IPv6
are implemented in this patch. The API includes layer 4 parameters if
the XDP program chooses to do deep packet inspection to allow compare
against ACLs implemented as FIB rules.

Header rewrite is left to the XDP program.

The lookup takes 2 flags:
- BPF_FIB_LOOKUP_DIRECT to do a lookup that bypasses FIB rules and goes
  straight to the table associated with the device (expert setting for
  those looking to maximize throughput)

- BPF_FIB_LOOKUP_OUTPUT to do a lookup from the egress perspective.
  Default is an ingress lookup.

Initial performance numbers collected by Jesper, forwarded packets/sec:

       Full stack    XDP FIB lookup    XDP Direct lookup
IPv4   1,947,969       7,074,156          7,415,333
IPv6   1,728,000       6,165,504          7,262,720

These number are single CPU core forwarding on a Broadwell
E5-1650 v4 @ 3.60GHz.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:57 +02:00
David Ahern
65a2022e89 net/ipv6: Add fib lookup stubs for use in bpf helper
Add stubs to retrieve a handle to an IPv6 FIB table, fib6_get_table,
a stub to do a lookup in a specific table, fib6_table_lookup, and
a stub for a full route lookup.

The stubs are needed for core bpf code to handle the case when the
IPv6 module is not builtin.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:57 +02:00
David Ahern
d4bea421f7 net/ipv6: Update fib6 tracepoint to take fib6_info
Similar to IPv4, IPv6 should use the FIB lookup result in the
tracepoint.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:57 +02:00
David Ahern
138118ec96 net/ipv6: Add fib6_lookup
Add IPv6 equivalent to fib_lookup. Does a fib lookup, including rules,
but returns a FIB entry, fib6_info, rather than a dst based rt6_info.
fib6_lookup is any where from 140% (MULTIPLE_TABLES config disabled)
to 60% faster than any of the dst based lookup methods (without custom
rules) and 25% faster with custom rules (e.g., l3mdev rule).

Since the lookup function has a completely different signature,
fib6_rule_action is split into 2 paths: the existing one is
renamed __fib6_rule_action and a new one for the fib6_info path
is added. fib6_rule_action decides which to call based on the
lookup_ptr. If it is fib6_table_lookup then the new path is taken.

Caller must hold rcu lock as no reference is taken on the returned
fib entry.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:56 +02:00
David Ahern
cc065a9eb9 net/ipv6: Refactor fib6_rule_action
Move source address lookup from fib6_rule_action to a helper. It will be
used in a later patch by a second variant for fib6_rule_action.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:56 +02:00
David Ahern
1d053da910 net/ipv6: Extract table lookup from ip6_pol_route
ip6_pol_route is used for ingress and egress FIB lookups. Refactor it
moving the table lookup into a separate fib6_table_lookup that can be
invoked separately and export the new function.

ip6_pol_route now calls fib6_table_lookup and uses the result to generate
a dst based rt6_info.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:56 +02:00
David Ahern
3b290a31bb net/ipv6: Rename rt6_multipath_select
Rename rt6_multipath_select to fib6_multipath_select and export it.
A later patch wants access to it similar to IPv4's fib_select_path.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:56 +02:00
David Ahern
6454743bc1 net/ipv6: Rename fib6_lookup to fib6_node_lookup
Rename fib6_lookup to fib6_node_lookup to better reflect what it
returns. The fib6_lookup name will be used in a later patch for
an IPv6 equivalent to IPv4's fib_lookup.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:10:56 +02:00
Wang YanQing
68625b7631 bpf, doc: clarification for the meaning of 'id'
For me, as a reader whose mother language isn't English, the
old words bring a little difficulty to catch the meaning, this
patch rewords the subsection in a more clarificatory way.

This patch also add blank lines as separator at two places
to improve readability.

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11 00:07:14 +02:00
David S. Miller
ca3943c4aa linux-can-fixes-for-4.17-20180510
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEENrCndlB/VnAEWuH5k9IU1zQoZfEFAlr0dbcTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCT0hTXNChl8Vj0CAC3JNk7QXU+WIEwtdKZU8GW1z+gBtXb
 xpaidY91djsj/2L3xzgIF+gRL6BHFQnK+0ylqmHsk38QVijl6SsWp8LPOy35u1wN
 yGdlEZNvnajguWENUr8cnNAtkICa7b1JR6Eyqt8ZY5Ugns2G+js6tqX3FCxkpu2I
 ZRMheSJ6tQcw1SjTQgC6rhsYFipSxOEdqNzdLDo3K4Ttmb2osoHnBcVZllUwZeTu
 iSUktcCjrbv24JNkyf1HE5wt8X3zT5nnSiAPs6JW3xwcS/kw4QOsZsFx7JwoVssB
 oulQ1YGz/uT13rPh40MsPNyiG65BpQCCu3JKmgJGF4Kbmd8CO3NyzA17
 =G0cT
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-4.17-20180510' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
this is a pull request for net/master consisting of 2 patches.

Both patches are from Lukas Wunner and fix two problems found in the
hi311x CAN driver under high load situations.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 17:57:11 -04:00
Colin Ian King
2fdae0349f qed: fix spelling mistake: "taskelt" -> "tasklet"
Trivial fix to spelling mistake in DP_VERBOSE message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 17:55:55 -04:00
Petr Machata
ec9efb523c rocker: Postpone filtering of !added_by_user FDB
Breaking out of the switch in rocker_switchdev_event() still ends up
scheduling work, except an ill-defined one. This leads to an OOPS cited
below. Fix by postponing the check until rocker_switchdev_event_work().

[   23.148476] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[   23.148810] PGD 0 P4D 0
[   23.148982] Oops: 0000 [#1] PREEMPT SMP PTI
[   23.149190] Modules linked in: bridge stp llc iptable_nat nf_nat_ipv4 nf_nat e1000 rocker
[   23.149768] CPU: 0 PID: 239 Comm: kworker/u2:4 Not tainted 4.17.0-rc3-net_next_queue-custom #6
[   23.150298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
[   23.150868] Workqueue: rocker rocker_switchdev_event_work [rocker]
[   23.151258] RIP: 0010:ofdpa_port_fdb+0x7b/0x230 [rocker]
[   23.151597] RSP: 0018:ffffc900004b3e18 EFLAGS: 00010246
[   23.151952] RAX: 00000000fffbc68c RBX: 0000000000000000 RCX: 0000000000000000
[   23.152363] RDX: 0000000000000010 RSI: ffff88003b4471e0 RDI: 00000000ffffffff
[   23.152768] RBP: ffff88003b4471c0 R08: ffff88003b4471e0 R09: ffff88003b4471c0
[   23.153141] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880036caf000
[   23.153515] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88003bc00000
[   23.153919] FS:  0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[   23.154444] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   23.154806] CR2: 0000000000000000 CR3: 0000000036eb6000 CR4: 00000000000006f0
[   23.155194] Call Trace:
[   23.155472]  rocker_switchdev_event_work+0x9b/0xd0 [rocker]
[   23.155850]  ? __schedule+0x231/0x700
[   23.156175]  process_one_work+0x1cf/0x3e0
[   23.156490]  worker_thread+0x26/0x3d0
[   23.156795]  ? trace_event_raw_event_workqueue_execute_start+0x80/0x80
[   23.157181]  kthread+0x10e/0x130
[   23.157485]  ? kthread_create_worker_on_cpu+0x40/0x40
[   23.157824]  ret_from_fork+0x35/0x40
[   23.158174] Code: 00 00 c1 e8 02 4c 8d 45 20 bf ff ff ff ff 83 e0 01 4c 89 65 20 88 45 14 48 8b 05 21 da 1f e2 4c 89 c6 4c 89 44 24 10 48 89 45 18 <41> 8b 45 00 89 45 28 41 0f b7 45 04 66 89 45 2c 0f b7 44 24 04
[   23.159346] RIP: ofdpa_port_fdb+0x7b/0x230 [rocker] RSP: ffffc900004b3e18
[   23.159742] CR2: 0000000000000000
[   23.160088] ---[ end trace f9b16d4cb6df0629 ]---

Fixes: 816a3bed95 ("switchdev: Add fdb.added_by_user to switchdev notifications")
Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 17:54:57 -04:00
Boris Pismenny
895262d857 tls: Fix tls_device initialization
Add sg table initialization to fix a BUG_ON encountered when enabling
CONFIG_DEBUG_SG.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 17:54:20 -04:00
Ganesh Goudar
b3c594ab6f cxgb4: fix the wrong conversion of Mbps to Kbps
fix the wrong conversion where 1 Mbps was converted to
1024 Kbps.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 17:52:02 -04:00
David S. Miller
ccb0263814 Merge branch 'mlxsw-Support-VLAN-devices-in-mirroring-offloads'
Ido Schimmel says:

====================
mlxsw: Support VLAN devices in mirroring offloads

Petr says:

When offloading "tc action mirred mirror", there are several scenarios
where VLAN devices can show up, that mlxsw can offload on Spectrum
machines.

I) A direct mirror to a VLAN device on top of a front-panel port device
   (commonly referred to as "RSPAN")

II) VLAN device in egress path of a packet when resolving a mirror to
    gretap or ip6gretap netdevice.

Specifically in the latter case, the following are the cases that can be
offloaded:

IIa) VLAN device directly above a physical device.
IIb) A VLAN-unaware bridge where the egress device is as in IIa.
IIc) VLAN device on top of a VLAN-aware bridge where the egress device
     is a physical device.

This patch set implements all the above cases.

First, in patch #1, br_vlan_get_info() is extended to allow bridge
master argument.

Case I is then implemented in patches #2 and #3, case II in patch #4.

Note that handling of VLAN protocol is not included. In case I, mirrored
packets may end up being double-tagged, and it might be reasonable for
the outer tag to be an 802.1ad. However, the protocol type configuration
would have to be put on the same VLAN netdevice that represents normal
VLAN traffic, and mlxsw currently ignores this setting in that case. Thus
this support was left out and the encapsulation always uses 802.1q
protocol.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 17:50:53 -04:00
Petr Machata
03c4413239 mlxsw: spectrum_span: Support VLAN under mirror-to-gretap
When mirroring to a gretap or ip6gretap device, allow the underlay
packet path to include VLAN devices. The following configurations are
supported in underlay:

- vlan over phys
- vlan-unaware bridge where the egress device is vlan over phys
- vlan over vlan-aware bridge where the egress device is phys

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 17:50:52 -04:00