Commit graph

781,636 commits

Author SHA1 Message Date
Borislav Petkov
4dba072cd0 x86/dumpstack: Explain the reasoning for the prologue and buffer size
The whole reasoning behind the amount of opcode bytes dumped and prologue
length isn't very clear so write down some of the reasons for why it is
done the way it is.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-10-bp@alien8.de
2018-04-26 16:15:28 +02:00
Borislav Petkov
602bd705da x86/dumpstack: Save first regs set for the executive summary
Save the regs set when __die() is onvoked for the first time and print it
in oops_end().

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-9-bp@alien8.de
2018-04-26 16:15:28 +02:00
Borislav Petkov
7cccf0725c x86/dumpstack: Add a show_ip() function
... which shows the Instruction Pointer along with the insn bytes around
it. Use it whenever rIP is printed. Drop the rIP < PAGE_OFFSET check since
probe_kernel_read() can handle any address properly.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-8-bp@alien8.de
2018-04-26 16:15:27 +02:00
Borislav Petkov
ba54d856a9 x86/fault: Dump user opcode bytes on fatal faults
Sometimes it is useful to see which user opcode bytes RIP points to
when a fault happens: be it to rule out RIP corruption, to dump info
early during boot, when doing core dumps is impossible due to not having
a writable filesystem yet.

Sometimes it is useful if debugging an issue and one doesn't have access
to the executable which caused the fault in order to disassemble it.

That last aspect might have some security implications so
show_unhandled_signals could be revisited for that or a new config option
added.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-7-bp@alien8.de
2018-04-26 16:15:27 +02:00
Borislav Petkov
e8b6f98451 x86/dumpstack: Add loglevel argument to show_opcodes()
Will be used in the next patch.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-6-bp@alien8.de
2018-04-26 16:15:26 +02:00
Borislav Petkov
9e4a90fd34 x86/dumpstack: Improve opcodes dumping in the code section
The code used to iterate byte-by-byte over the bytes around RIP and that
is expensive: disabling pagefaults around it, copy_from_user, etc...

Make it read the whole buffer of OPCODE_BUFSIZE size in one go. Use a
statically allocated 64 bytes buffer so that concurrent show_opcodes()
do not interleave in the output even though in the majority of the cases
it's serialized via die_lock. Except the #PF path which doesn't...

Also, do the PAGE_OFFSET check outside of the function because latter
will be reused in other context.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-5-bp@alien8.de
2018-04-26 16:15:26 +02:00
Borislav Petkov
f0a1d7c11c x86/dumpstack: Carve out code-dumping into a function
No functionality change, carve it out into a separate function for later
changes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-4-bp@alien8.de
2018-04-26 16:15:26 +02:00
Borislav Petkov
5df61707f0 x86/dumpstack: Unexport oops_begin()
The only user outside of arch/ is not a module since

  86cd47334b ("ACPI, APEI, GHES, Prevent GHES to be built as module")

No functional changes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-3-bp@alien8.de
2018-04-26 16:15:26 +02:00
Borislav Petkov
5d12f0424e x86/dumpstack: Remove code_bytes
This was added by

  86c4183742 ("[PATCH] i386: add option to show more code in oops reports")

long time ago but experience shows that 64 instruction bytes are plenty
when deciphering an oops. So get rid of it.

Removing it will simplify further enhancements to the opcodes dumping
machinery coming in the following patches.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/20180417161124.5294-2-bp@alien8.de
2018-04-26 16:15:25 +02:00
Chris Wilson
7f961d799f drm/i915: Compile out engine debug for release
The majority of the engine state dumping is too voluminous to be useful
outside of a controlled setup, though a few do accompany severe errors.
Keep the debug dumps next to the errors, but hide the others behind a CI
compile flag. This becomes more useful when adding more dumps to latency
sensitive paths.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426103219.22181-1-chris@chris-wilson.co.uk
2018-04-26 15:13:35 +01:00
Ryder Lee
3a280ed132
ASoC: mediatek: switch to SPDX license tag
Add SPDX identifiers to all remaining files in sound/soc/mediatek/

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:09:36 +01:00
Ryder Lee
eaeb4194de
ASoC: mediatek: add MT7622 AFE compatible in documentation
Add support for MT7622 AFE which shares the same binding with MT2701.

Cc: devicetree@vger.kernel.org
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:09:07 +01:00
Ryder Lee
bfdc56e548
ASoC: mediatek: add MT7622 AFE support
This patch adds support for the MT7622 AFE which reuses MT2701 driver.

We also introduce the 'struct mt2701_soc_variants' to differentiate
between the SoC generations as there might be other (existing or future)
chips that use the same binding and driver, then being a little more
abstract could help in the long run.

Cc: Jia Zeng <jia.zeng@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:09:02 +01:00
Ryder Lee
ab7b4ee986
ASoC: mediatek: Add MTK_STREAM_NUM to mtk-base-afe.h
Add MTK_STREAM_NUM to common header and modify related stuff so that
the other SoCs can reuse it.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:08:58 +01:00
Ryder Lee
cf87027360
ASoC: mediatek: simplify the control logic of MT2701 I2S
This patch adjusts the mt2701_afe_i2s_ops to simplify the control
logic of the I2S path.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 15:08:43 +01:00
Yazen Ghannam
da6fa7ef67 x86/smpboot: Don't use mwait_play_dead() on AMD systems
Recent AMD systems support using MWAIT for C1 state. However, MWAIT will
not allow deeper cstates than C1 on current systems.

play_dead() expects to use the deepest state available.  The deepest state
available on AMD systems is reached through SystemIO or HALT. If MWAIT is
available, it is preferred over the other methods, so the CPU never reaches
the deepest possible state.

Don't try to use MWAIT to play_dead() on AMD systems. Instead, use CPUIDLE
to enter the deepest state advertised by firmware. If CPUIDLE is not
available then fallback to HALT.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20180403140228.58540-1-Yazen.Ghannam@amd.com
2018-04-26 16:06:19 +02:00
Takashi Sakamoto
0f925660a7 ALSA: dice: fix error path to destroy initialized stream data
In error path of snd_dice_stream_init_duplex(), stream data for incoming
packet can be left to be initialized.

This commit fixes it.

Fixes: 436b5abe22 ('ALSA: dice: handle whole available isochronous streams')
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-26 15:24:54 +02:00
Rafael J. Wysocki
bd6dff55de Merge branches 'acpi-watchdog', 'acpi-button' and 'acpi-video'
* acpi-watchdog:
  ACPI / watchdog: Prefer iTCO_wdt on Lenovo Z50-70

* acpi-button:
  ACPI / button: make module loadable when booted in non-ACPI mode

* acpi-video:
  ACPI / video: Only default only_lcd to true on Win8-ready _desktops_
2018-04-26 15:11:39 +02:00
Rafael J. Wysocki
e140c4af1b Merge branches 'acpi-pm' and 'pm-cpufreq'
* acpi-pm:
  ACPI / PM: Blacklist Low Power S0 Idle _DSM for ThinkPad X1 Tablet(2016)

* pm-cpufreq:
  cpufreq: brcmstb-avs-cpufreq: remove development debug support
2018-04-26 15:10:25 +02:00
Ezequiel Garcia
73acc46b06 arm64: defconfig: Enable bluetooth USB support
Enable the Bluetooth USB controller which is present
in the RK3399 Kevin Chromebook.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:05:59 +02:00
Ezequiel Garcia
61bcbdd6f1 arm64: defconfig: Enable Marvell WiFi-Ex PCIe driver
Enable the wireless network driver to support the WiFi adapter
present in RK3399 Kevin Chromebooks. Note that this also
enables Bluetooth via USB.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:05:42 +02:00
Ezequiel Garcia
e545eb20c5 arm64: defconfig: Enable Atmel Maxtouch driver
Enable the Atmel Maxtouch driver to support the touchscreen
and touchpad present in RK3399 Kevin Chromebooks.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:05:30 +02:00
Ezequiel Garcia
e9cfce4195 arm64: defconfig: Enable HID over I2C drivers
Enable the HID-I2C driver to support the stylus
present in RK3399 Kevin Chromebooks.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:04:59 +02:00
Enric Balletbo i Serra
b839325cef arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks.
Enable following drivers for merged devices:
- ChromeOS EC RTC driver.
- ChromeOS EC userspace interface.
- ChromeOS EC light and proximity sensors.
- ChromeOS EC Barometer Sensor driver.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 15:02:20 +02:00
Enric Balletbo i Serra
7c8b77f815 arm64: defconfig: Enable Rockchip io-domain driver
Heiko Stübner justified pretty well the change in commit e330eb86ba
("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This
change is also needed for arm64 rockchip boards, so, do the same for arm64.

The io-domain driver is necessary to notify the soc about voltages
changes happening on supplying regulators. Probably the most important
user right now is the mmc tuning code, where the soc needs to get
notified when the voltage is dropped to the 1.8V point.

As this option is necessary to successfully tune UHS cards etc, it
should get built in. Otherwise, tuning will fail with,

   dwmmc_rockchip fe320000.dwmmc: All phases bad!
   mmc0: tuning execution failed: -5

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 14:59:02 +02:00
Enric Balletbo i Serra
54ab3747b9 arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399
Enables typec phyter and extcon driver for cable detection that is used by
USB 3.0 controller for Rockchip rk3399 SoCs.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-26 14:58:48 +02:00
Jiri Kosina
14d12bb858 x86/mm: Make vmemmap and vmalloc base address constants unsigned long
Commits 9b46a051e4 ("x86/mm: Initialize vmemmap_base at boot-time") and 
a7412546d8 ("x86/mm: Adjust vmalloc base and size at boot-time") lost the 
type information for __VMALLOC_BASE_L4, __VMALLOC_BASE_L5, 
__VMEMMAP_BASE_L4 and __VMEMMAP_BASE_L5 constants.

Declare them explicitly unsigned long again.

Fixes: 9b46a051e4 ("x86/mm: Initialize vmemmap_base at boot-time")
Fixes: a7412546d8 ("x86/mm: Adjust vmalloc base and size at boot-time")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1804121437350.28129@cbobk.fhfr.pm
2018-04-26 14:56:24 +02:00
Thomas Gleixner
a3ed0e4393 Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
Revert commits

92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")

As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.

As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:

* systemd kills daemons on resume, after >WatchdogSec seconds
  of suspending (Genki Sky).  [Verified that that's because systemd uses
  CLOCK_MONOTONIC and expects it to not include the suspend time.]

* systemd-journald misbehaves after resume:
  systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
  (Mike Galbraith).

* NetworkManager reports "networking disabled" and networking is broken
  after resume 50% of the time (Pavel).  [May be because of systemd.]

* MATE desktop dims the display and starts the screensaver right after
  system resume (Pavel).

* Full system hang during resume (me).  [May be due to systemd or NM or both.]

That happens on debian and open suse systems.

It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.

Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2018-04-26 14:53:32 +02:00
Thomas Gleixner
1f71addd34 tick/sched: Do not mess with an enqueued hrtimer
Kaike reported that in tests rdma hrtimers occasionaly stopped working. He
did great debugging, which provided enough context to decode the problem.

CPU 3			     	      	     CPU 2

idle
start sched_timer expires = 712171000000
 queue->next = sched_timer
					    start rdmavt timer. expires = 712172915662
					    lock(baseof(CPU3))
tick_nohz_stop_tick()
tick = 716767000000			    timerqueue_add(tmr)

hrtimer_set_expires(sched_timer, tick);
  sched_timer->expires = 716767000000  <---- FAIL
					     if (tmr->expires < queue->next->expires)
hrtimer_start(sched_timer)		          queue->next = tmr;
lock(baseof(CPU3))
					     unlock(baseof(CPU3))
timerqueue_remove()
timerqueue_add()

ts->sched_timer is queued and queue->next is pointing to it, but then
ts->sched_timer.expires is modified.

This not only corrupts the ordering of the timerqueue RB tree, it also
makes CPU2 see the new expiry time of timerqueue->next->expires when
checking whether timerqueue->next needs to be updated. So CPU2 sees that
the rdma timer is earlier than timerqueue->next and sets the rdma timer as
new next.

Depending on whether it had also seen the new time at RB tree enqueue, it
might have queued the rdma timer at the wrong place and then after removing
the sched_timer the RB tree is completely hosed.

The problem was introduced with a commit which tried to solve inconsistency
between the hrtimer in the tick_sched data and the underlying hardware
clockevent. It split out hrtimer_set_expires() to store the new tick time
in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in
the NOHZ + HIGHRES case the hrtimer might still be queued.

Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets
timer->expires after canceling the timer and move the hrtimer_set_expires()
invocation into the NOHZ only code path which is not affected as it merily
uses the hrtimer as next event storage so code pathes can be shared with
the NOHZ + HIGHRES case.

Fixes: d4af6d933c ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync")
Reported-by: "Wan Kaike" <kaike.wan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: "Marciniszyn Mike" <mike.marciniszyn@intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-rdma@vger.kernel.org
Cc: "Dalessandro Dennis" <dennis.dalessandro@intel.com>
Cc: "Fleck John" <john.fleck@intel.com>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Weiny Ira" <ira.weiny@intel.com>
Cc: "linux-rdma@vger.kernel.org"
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de
2018-04-26 14:53:32 +02:00
Boris Brezillon
bdf3a3b59a
spi: Check presence the of ->transfer[_xxx]() before registering a controller
Right now, no checks are done on the presence of a ->transfer[_xxx]()
method, which can lead to a NULL pointer dereference when someone
starts sending something on the bus.

Do the check at registration time and refuse to add the controller if
all ->transfer[_xxx]() pointers are NULL.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-26 13:53:29 +01:00
Arvind Yadav
a4eb490a41 HID: intel-ish-hid: use put_device() instead of kfree()
Never directly free @dev after calling device_register(), even
if it returned an error. Always use put_device() to give up the
reference initialized.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:36:43 +02:00
Christophe JAILLET
a317e55957 HID: alps: Fix some style in 't4_read_write_register()'
Better indent the code to improve readability.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:33:35 +02:00
Christophe JAILLET
69934012f3 HID: alps: Check errors returned by 't4_read_write_register()'
If only the first 't4_read_write_register()' call fails, the error code
will be overwritten and lost.
Directly report the error instead.

While at it, log some errors if 't4_read_write_register()' fails, as done
in the rest of the driver.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:33:35 +02:00
Christophe JAILLET
edb6cb3d7c HID: alps: Save a memory allocation in 't4_read_write_register()' when writing data
if 'read_flag' is false, there is no need to allocate and free memory.
We can simply avoid the memory allocation and pass NULL to kfree.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:33:35 +02:00
Christophe JAILLET
605f077290 HID: alps: Report an error if we receive invalid data in 't4_read_write_register()'
If the data received is not what is expected, we should return an error.

Otherwise, we return 0 or a positive value which will be interpreted as
success, but '*read_val' has not been updated.

Fixes: 73196ebe13 ("HID: alps: add support for Alps T4 Touchpad device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26 14:33:35 +02:00
Arnaldo Carvalho de Melo
68766bfa56 perf top: Use __map__is_kernel()
Shorter form to figure out if a given map is the kernel one and also
reduces the number of code accessing MAP__{FUNCTION,VARIABLE}, that
should go away at some point.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-rn8pexelsxpx92ce3elu3wiw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:27 -03:00
Jiri Olsa
abc60bad00 perf stat: Display length strings of each run for --table option
Adding support to display visual aid 'length strings' to easily spot the
biggest difference in time table.

  $ perf stat -r 10 --table perf bench sched pipe
  ...

   Performance counter stats for './perf bench sched pipe' (5 runs):

             # Table of individual measurements:
             5.189 (-0.293) #
             5.189 (-0.294) #
             5.186 (-0.296) #
             5.663 (+0.181) ##
             6.186 (+0.703) ####

             # Final result:
             5.483 +- 0.198 seconds time elapsed  ( +-  3.62% )

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-9-jolsa@kernel.org
[ Updated 'perf stat --table' man page entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:27 -03:00
Jiri Olsa
e55c14af48 perf stat: Add --table option to display time of each run
Add --table option to display time for each run (-r option), like:

  $ perf stat --null -r 5 --table perf bench sched pipe

   Performance counter stats for './perf bench sched pipe' (5 runs):

             # Table of individual measurements:
             5.379 (-0.176)
             5.243 (-0.311)
             5.238 (-0.317)
             5.536 (-0.019)
             6.377 (+0.823)

             # Final result:
             5.555 +- 0.213 seconds time elapsed  ( +-  3.83% )

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-8-jolsa@kernel.org
[ Document the new option in 'perf stat's man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:27 -03:00
Jiri Olsa
bc22de9bcd perf stat: Display time in precision based on std deviation
Ingo suggested to display elapsed time for multirun workload (perf stat
-e) with precision based on the precision of the standard deviation.

In his own words:

  > This output is a slightly bit misleading:

  >  Performance counter stats for 'make -j128' (10 runs):
  >      27.988995256 seconds time elapsed                  ( +-  0.39% )

  > The 9 significant digits in the result, while only 1 is valid, suggests accuracy
  > where none exists.

  > It would be better if 'perf stat' would display elapsed time with a precision
  > adjusted to stddev, it should display at most 2 more significant digits than
  > the stddev inaccuracy.

  > I.e. in the above case 0.39% is 0.109, so we only have accuracy for 1 digit, and
  > so we should only display 3:

  >        27.988 seconds time elapsed                       ( +-  0.39% )

Plus a suggestion about the output, which is small enough and connected
with the above change that I merged both changes together.

  > Small output style nit - I think it would be nice if with --repeat the stddev was
  > also displayed in absolute values, besides percentage:
  >
  >       27.988 +- 0.109 seconds time elapsed   ( +- 0.39% )

The output is now:

   Performance counter stats for './perf bench sched pipe' (5 runs):
   SNIP
           13.3667 +- 0.0256 seconds time elapsed  ( +-  0.19% )

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:27 -03:00
Jiri Olsa
5824729735 perf check-headers.sh: Add support to check 2 independent files
Add 'check_2' function to check 2 different files, the 'check' function
stays to check files that differs only in the prefix path.

In upcoming changes we need to check header files in locations which
don't follow the prefix logic.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:26 -03:00
Jiri Olsa
15019e9815 perf check-headers.sh: Simplify arguments passing
Passing whole string instead of parsing them after.  It simplifies
things for the next patches, that adds another function call, which
makes it hard to pass arguments in the correct shape.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:26 -03:00
Ravi Bangoria
9a73c30854 perf buildid-cache: Support --purge-all option
User can remove files from cache using --remove/--purge options but both
needs list of files as an argument. It's not convenient when you want to
flush out entire cache. Add an option to purge all files from cache.

Ex,
  # perf buildid-cache -l
    8a86ef73e44067bca52cc3f6cd3e5446c783391c /tmp/a.out
    ebe71fdcf4b366518cc154d570a33cd461a51c36 /tmp/a.out.1
  # perf buildid-cache -P -v
    Removing /tmp/a.out (8a86ef73e44067bca52cc3f6cd3e5446c783391c): Ok
    Removing /tmp/a.out.1 (ebe71fdcf4b366518cc154d570a33cd461a51c36): Ok
    Purged all: Ok

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-4-ravi.bangoria@linux.vnet.ibm.com
[ Initialize 'err' in build_id_cache__purge_all(), to fix build on debian:7, as it can be used uninitialized ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:26 -03:00
Ravi Bangoria
8e1e0d7467 perf buildid-cache: Support --list option
'perf buildid-cache' allows to add/remove files into cache but there is
no option to list all cached files. Add --list option to list all
_valid_ cached files.

Ex,
  # perf buildid-cache --add /tmp/a.out
  # perf buildid-cache -l
    8a86ef73e44067bca52cc3f6cd3e5446c783391c /tmp/a.out

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-3-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-26 09:30:26 -03:00
Eliad Peller
d3a6f7fb97 iwlwifi: mvm: set wakeup filters for wowlan "any" configuration
In case of "any" wowlan trigger is configured, no valid wakeup filter
was configured.

Moreover, the fw assumes there's no connection when there are no configured
wakeup filters.
This leads to the station info not being updated on D3 command, causing
rate_n_flags to be 0 when the offloading code sends tx frame (triggering
SYSASSERT_102C due to invalid antenna param)

Note: "any" trigger is currently assumed to only be used when entering
d0i3 (which has a different flow). However, we still reach this code
when using d3_test.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26 15:18:07 +03:00
Sara Sharon
755a654cad iwlwifi: mvm: remove check for non low latency TIDs
Firmware will only send non low-latency TIDs in the
bitmap, so the check is now redundant.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26 15:18:07 +03:00
Luca Coelho
c3039b10df iwlwifi: make bitfield a u32 instead of u16
The bitfield we use in struct iwl_cfg contains 17 bits, but we declare
it as u16.  The compiler doesn't seem to have any problems with that
(it probably automatically makes it u32), but it's cleaner to use a
type that is long enough for all the flags.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26 15:18:07 +03:00
Luca Coelho
49564a806f iwlwifi: pcie: remove non-responsive device
If we fail to to grab NIC access because the device is not responding
(i.e. CSR_GP_CNTRL returns 0xFFFFFFFF), remove the device from the PCI
bus, to avoid any further damage, and to let the user space rescan.

In order to inform the userspace that a rescan is needed, we send a
kobject uevent with "INACCESSIBLE".

This functionality is disabled by default, but can be enabled via a
new module parameter called "remove_when_gone".  In the future we may
change this module parameter to include 3 modes instead: do nothing;
auto-rescan or; send uevent.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Rajat Jain <rajatja@google.com>
2018-04-26 15:18:07 +03:00
Luca Coelho
de460ddd8b iwlwifi: fw: combine loading of last page block into main copy loop
Now that we check and copy only the actual size of the page block,
there is no need to treat the last block separately.  Remove the
mostly duplicate code and make the main copy loop handle also the last
block.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26 15:18:07 +03:00
Luca Coelho
9039d98581 iwlwifi: fw: harden page loading code
The page loading code trusts the data provided in the firmware images
a bit too much and may cause a buffer overflow or copy unknown data if
the block sizes don't match what we expect.

To prevent potential problems, harden the code by checking if the
sizes we are copying are what we expect.

Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26 15:18:07 +03:00
Johannes Berg
1e5b775031 iwlwifi: mvm: move skb padding reservation earlier
Future changes will require moving the HE radiotap data into
the SKB head, but this means we need to have the alignment
reservation done before that. To prepare, move the alignment
reservation earlier here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26 15:18:07 +03:00