Commit graph

781,636 commits

Author SHA1 Message Date
Kunihiko Hayashi
92724c03fa ARM: dts: uniphier: add required clocks and resets to Pro4 ethernet node
The GIO clock/reset, Another MAC clock, and the PHY clock are required
for the ethernet of Pro4 SoC.
And add clock-names and reset-names to the ethernet node of PXs2 since
we need to distinguish clocks and resets now.

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-25 00:21:36 +09:00
Kunihiko Hayashi
b076ff8bdd arm64: dts: uniphier: add syscon-phy-mode property to each ethernet node
Add syscon-phy-mode property specifying a phandle of system controller
to each ethernet node.

In addition, LD11 SoC has a built-in ethernet PHY. When we set "internal"
to phy-mode property, this built-in PHY is available.
This patch changes phy-mode property for LD11 to "internal", as default.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-25 00:21:14 +09:00
Kunihiko Hayashi
a34a464d6e arm64: dts: uniphier: add clock-names and reset-names to ethernet node
Add clock-names and reset-names because this node recognizes multiple
clocks and resets.  ("ether", and so on, for each)

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-25 00:21:10 +09:00
Colin Ian King
39035bfdc3 ixgbevf: ensure xdp_ring resources are free'd on error exit
The current error handling for failed resource setup for xdp_ring
data is a break out of the loop and returning 0 indicated everything
was OK, when in fact it is not.  Fix this by exiting via the
error exit label err_setup_tx that will clean up the resources
correctly and return and error status.

Detected by CoverityScan, CID#1466879 ("Logically dead code")

Fixes: 21092e9ce8 ("ixgbevf: Add support for XDP_TX action")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-24 08:20:40 -07:00
Takashi Iwai
08605068df ALSA: hda - Sanity check of access to SPDIF controls array
Put WARN_ON() and bail out if the given index is over the allocated
array of the given SPDIF controls.  It's merely a sanity check to
catch any potential issues (if any).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24 17:18:59 +02:00
Takashi Sakamoto
c1a3610104 ALSA: dice: improve support for ancient firmware for DICE
In early stage of firmware SDK, DICE seems to lose its backward
compatibility due to some registers on global address section. I found
this with Alesis Multimix 12 FireWire with ancient firmware (approx.
shipped version).

According to retrieved log from the unit, global section has 96 byte
space. On the other hand, current version of ALSA dice driver assumes
that all of supported unit has at least 100 byte space.

$ ./firewire-request /dev/fw1 read 0xffffe0000000 28
result: 000: 00 00 00 0a 00 00 00 18 00 00 00 22 00 00 00 8a
result: 010: 00 00 00 ac 00 00 01 12 00 00 00 00 00 00 00 00
result: 020: 00 00 00 00 00 00 00 00

This commit adds support for the ancient firmware. Check of global section
is loosened to accept the smaller space. The lack of information is
already compensated by hard-coded parameters.

I experienced that the latest version of Windows driver for this model
can't handle this unit, too. This means that TCAT releases firmware SDK
without backward compatibility for the ancient firmware.

Below list is a early history of driver/firmware package released by
Alesis. I investigated on wayback machine on Internet Archive:
 * Unknown: PAL v1.0.41.2, firmware v1.0.3
 * Mar 2006: PAL v1.54.0, firmware v1.0.4
 * Dec 2006: PAL v2.0.0.2, firmware v2.0
 * Jun 2007: PAL v3.0.41.5, firmware v2.0
 * Jul 2007: PAL v3.0.56.2. firmware v2.0
 * Jan 2008: PAL v3.0.81.1080, firmware v2.0

If I can assume that firmware version is the same as DICE version, DICE
version for the issued firmware may be v1.0.3. According to code base of
userspace driver project (FFADO), I can read DICE v1.0.4 supports global
space larger than 100 byte. I guess the smaller space of global section is
a feature of DICE v1.0.3.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24 17:18:59 +02:00
Ondrej Mosnáček
23bcc480da audit: allow not equal op for audit by executable
Current implementation of auditing by executable name only implements
the 'equal' operator. This patch extends it to also support the 'not
equal' operator.

See: https://github.com/linux-audit/audit-kernel/issues/53

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-04-24 11:18:10 -04:00
Yafang Shao
a06ac0d67d Revert "net: init sk_cookie for inet socket"
This reverts commit <c6849a3ac1> ("net: init sk_cookie for inet socket")

Per discussion with Eric, when update sock_net(sk)->cookie_gen, the
whole cache cache line will be invalidated, as this cache line is shared
with all cpus, that may cause great performace hit.

Bellow is the data form Eric.
"Performance is reduced from ~5 Mpps to ~3.8 Mpps with 16 RX queues on
my host" when running synflood test.

Have to revert it to prevent from cache line false sharing.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 11:15:32 -04:00
Ooi, Joyce
e8c622e2b5 arm64: dts: stratix10: Change pad skew values for EMAC0 PHY driver
The HPS EMAC0 drive strength is changed to 4mA because the initial 8mA
drive strength has caused CE test to fail. This requires changes on the
pad skew for EMAC0 PHY driver. Based on several measurements done, Tx
clock does not require the extra 0.96ns delay.

Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-24 10:12:49 -05:00
Andy Shevchenko
efc4a13724
spi: pxa2xx: Allow 64-bit DMA
Currently the 32-bit device address only is supported for DMA. However,
starting from Intel Sunrisepoint PCH the DMA address of the device FIFO
can be 64-bit.

Change the respective variable to be compatible with DMA engine
expectations, i.e. to phys_addr_t.

Fixes: 34cadd9c1b ("spi: pxa2xx: Add support for Intel Sunrisepoint")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2018-04-24 16:10:12 +01:00
Bartosz Golaszewski
f64dd55093 ARM: dts: consistently use 'atmel' as at24 manufacturer in cyclone5
Using 'at' or 'at24' as the <manufacturer> part of the compatible
string is now deprecated. Use a correct value: 'atmel,<model>'.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-24 10:07:52 -05:00
Steve French
23657ad730 SMB3: Fix 3.11 encryption to Windows and handle encrypted smb3 tcon
Temporarily disable AES-GCM, as AES-CCM is only currently
enabled mechanism on client side.  This fixes SMB3.11
encrypted mounts to Windows.

Also the tree connect request itself should be encrypted if
requested encryption ("seal" on mount), in addition we should be
enabling encryption in 3.11 based on whether we got any valid
encryption ciphers back in negprot (the corresponding session flag is
not set as it is in 3.0 and 3.02)

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
2018-04-24 10:07:14 -05:00
Steve French
117e3b7fed CIFS: set *resp_buf_type to NO_BUFFER on error
Dan Carpenter had pointed this out a while ago, but the code around
this had changed so wasn't causing any problems since that field
was not used in this error path.

Still, it is cleaner to always initialize this field, so changing
the error path to set it.

Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2018-04-24 10:06:28 -05:00
Bartlomiej Zolnierkiewicz
8cad95f56f Linux 4.17-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlrdQu4eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGVjEIAJqS+sFJCAL8rNAv
 tiVJHuAjogVdZGJJFBUWyb4yNZw7nRSKfitaSe875WdF55IGEhnMDbAGe7IMEb5j
 1F8Ml2bzJzMWxfBWAzeU+wj6FaQksbIsI1gVM8tqk/Wtu121pB32VW8R82oHg+Hr
 sjsFTKFicNsqih+7QTVujaRjSmabKf0/JdyYM6p1cqWrxZQ0pmFaGDu0rwet9PFx
 lJsewOmnoZ0GV/Qzn40E304Xf+Vv2gVDVbC5wY86ejNigFt+5qN+gtDqDu7UkftR
 ZfD4vJuiKCigNfUrpbJWfpbegBiQc0JMvjLWWhgo/AYdGhNGMlwjQanh2oZcXlrw
 VmrNduo=
 =/j3z
 -----END PGP SIGNATURE-----

Merge tag 'v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.17-rc2
2018-04-24 16:52:52 +02:00
Niklas Söderlund
2564fd43f6 dt-bindings: thermal: rcar-gen3-thermal: update register size in example
The datasheet has been expanded with more registers and the DT files
have been updated with the new size. This change updates the example so
writing new DT files can use the enhanced driver which uses the new
registers.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
[robh: s/have/has/, s/enchanted/enhanced/]
Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-24 09:27:23 -05:00
David S. Miller
8399743a5a Merge branch 'net-DIM-tx'
Tal Gilboa says:

====================
Introduce adaptive TX interrupt moderation to net DIM

Net DIM is a library designed for dynamic interrupt moderation. It was
implemented and optimized with receive side interrupts in mind, since these
are usually the CPU expensive ones. This patch-set introduces adaptive transmit
interrupt moderation to net DIM, complete with a usage in the mlx5e driver.
Using adaptive TX behavior would reduce interrupt rate for multiple scenarios.
Furthermore, it is essential for increasing bandwidth on cases where payload
aggregation is required.

v3: Remove "inline" from functions in .c files (requested by DaveM). Revert
adding "enabled" field from struct net_dim and applied mlx5e structural
suggestions (suggested by SaeedM).

v2: Rebase over proper tree.

v1: Fix compilation issues due to missed function renaming.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:15:08 -04:00
Tal Gilboa
cbce4f4447 net/mlx5e: Enable adaptive-TX moderation
Add support for adaptive TX moderation. This greatly reduces TX interrupt
rate and increases bandwidth, mostly for TCP bandwidth over ARM
architecture (below). There is a slight single stream TCP with very large
message sizes degradation (x86). In this case if there's any moderation on
transmitted packets the bandwidth would reduce due to hitting TCP output limit.
Since this is a synthetic case, this is still worth doing.

Performance improvement (ConnectX-4Lx 40GbE, ARM)
TCP 64B bandwidth with 1-50 streams increased 6-35%.
TCP 64B bandwidth with 100-500 streams increased 20-70%.

Performance improvement (ConnectX-5 100GbE, x86)
Bandwidth: increased up to 40% (1024B with 10s of streams).
Interrupt rate: reduced up to 50% (1024B with 1000s of streams).

Performance degradation (ConnectX-5 100GbE, x86)
Bandwidth: up to 10% decrease single stream TCP (1MB message size from
51Gb/s to 47Gb/s).

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:15:08 -04:00
Tal Gilboa
623ad75522 net/dim: Support adaptive TX moderation
Interrupt moderation for TX traffic requires different profiles than RX
interrupt moderation. The main goal here is to reduce interrupt rate and
allow better payload aggregation by keeping SKBs in the TX queue a bit
longer. Ping-pong behavior would get a profile with a short timer, so
latency wouldn't increase for these scenarios. There might be a slight
degradation in bandwidth for single stream with large message sizes, since
net.ipv4.tcp_limit_output_bytes is limiting the allowed TX traffic, but
with many streams performance is always improved.

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:15:07 -04:00
Tal Gilboa
026a807c2d net/dim: Rename *_get_profile() functions to *_get_rx_moderation()
Preparation for introducing adaptive TX to net DIM.

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:15:07 -04:00
José Roberto de Souza
df9e652174 drm/i915/fbdev: Enable late fbdev initial configuration
If the initial fbdev configuration (intel_fbdev_initial_config()) runs
and there still no sink connected it will cause
drm_fb_helper_initial_config() to return 0 as no error happened (but
internally the return is -EAGAIN).  Because no framebuffer was
allocated, when a sink is connected intel_fbdev_output_poll_changed()
will not execute drm_fb_helper_hotplug_event() that would trigger
another try to do the initial fbdev configuration.

So here allowing drm_fb_helper_hotplug_event() to be executed when there
is no framebuffer allocated and fbdev was not set up yet.

This issue also happens when a MST DP sink is connected since boot, as
the MST topology is discovered in parallel if
intel_fbdev_initial_config() is executed before the first sink MST is
discovered it will cause this same issue.

This is a follow-up patch of
https://patchwork.freedesktop.org/patch/196089/

Changes from v1:
- not creating a dump framebuffer anymore, instead just allowing
  drm_fb_helper_hotplug_event() to execute when fbdev is not setup yet.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104158
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104425
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: frederik <frederik.schwan@linux.com> # 4.15.17
Tested-by: Ian Pilcher <arequipeno@gmail.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418234158.9388-1-jose.souza@intel.com
2018-04-24 17:11:13 +03:00
Paolo Abeni
db688c24ea vhost_net: use packet weight for rx handler, too
Similar to commit a2ac99905f ("vhost-net: set packet weight of
tx polling to 2 * vq size"), we need a packet-based limit for
handler_rx, too - elsewhere, under rx flood with small packets,
tx can be delayed for a very long time, even without busypolling.

The pkt limit applied to handle_rx must be the same applied by
handle_tx, or we will get unfair scheduling between rx and tx.
Tying such limit to the queue length makes it less effective for
large queue length values and can introduce large process
scheduler latencies, so a constant valued is used - likewise
the existing bytes limit.

The selected limit has been validated with PVP[1] performance
test with different queue sizes:

queue size		256	512	1024

baseline		366	354	362
weight 128		715	723	670
weight 256		740	745	733
weight 512		600	460	583
weight 1024		423	427	418

A packet weight of 256 gives peek performances in under all the
tested scenarios.

No measurable regression in unidirectional performance tests has
been detected.

[1] https://developers.redhat.com/blog/2017/06/05/measuring-and-comparing-open-vswitch-performance/

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:02:13 -04:00
Xin Long
9cf2f437ca team: fix netconsole setup over team
The same fix in Commit dbe173079a ("bridge: fix netconsole
setup over bridge") is also needed for team driver.

While at it, remove the unnecessary parameter *team from
team_port_enable_netpoll().

v1->v2:
  - fix it in a better way, as does bridge.

Fixes: 0fb52a27a0 ("team: cleanup netpoll clode")
Reported-by: João Avelino Bellomo Filho <jbellomo@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 09:36:21 -04:00
Lukasz Majewski
3711a32f71 doc: Add vendor prefix for Kaohsiung
The 'koe' entry has been added to vendor-prefixes.txt to indicate
products from Kaohsiung Opto-Electronics Inc.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-24 08:04:59 -05:00
Viresh Kumar
4550fe6370 of: Don't create device for OPP tables
The OPP tables are present as separate nodes, whose phandle is used in
the "operating-points-v2" property of devices. Currently the OF core
creates a device for the OPP table unconditionally, which is not used by
any kernel code.

This patch creates another OF device_id table for the nodes which must
be skipped while creating devices and OPP is the only user of it for now.

Reported-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-24 08:04:04 -05:00
Chris Wilson
aaab22bcd1 drm/i915: Skip printing global offsets for per-engine scratch pages
Knowing the offset of the per-engine scratch/HWS page during boot is not
very informative, so remove the DRM_DEBUG.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424115236.2022-1-chris@chris-wilson.co.uk
2018-04-24 14:00:37 +01:00
Chris Wilson
56021f48db drm/i915: Don't dump umpteen thousand requests
If we have more than a few, possibly several thousand request in the
queue, don't show the central portion, just the first few and the last
being executed and/or queued. The first few should be enough to help
identify a problem in execution, and most often comparing the first/last
in the queue is enough to identify problems in the scheduling.

We may need some fine tuning to set MAX_REQUESTS_TO_SHOW for common
debug scenarios, but for the moment if we can avoiding spending more
than a few seconds dumping the GPU state that will avoid a nasty
livelock (where hangcheck spends so long dumping the state, it fires
again and starts to dump the state again in parallel, ad infinitum).

v2: Remember to print last not the stale rq iter after the loop.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424081600.27544-1-chris@chris-wilson.co.uk
2018-04-24 14:00:37 +01:00
Chris Wilson
247870ac8e drm/i915: Build request info on stack before printk
printk unhelpfully inserts a '\n' between consecutive calls, and since
our drm_printf wrapper may be emitting info a seq_file instead,
KERN_CONT is not an option. To work with any drm_printf destination, we
need to build up the output into a temporary buf on the stack and then
feed the complete line in a single call to printk.

Fixes: b7268c5eed ("drm/i915: Pack params to engine->schedule() into a struct")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424010839.22860-1-chris@chris-wilson.co.uk
2018-04-24 14:00:37 +01:00
Hans de Goede
13b86f50ea thermal: int3403_thermal: Fix NULL pointer deref on module load / probe
Starting with kernel 4.17 thermal_cooling_device_register() will call the
get_max_state() op during register.

Since we deref priv->priv in int3403_get_max_state() this means we must
set priv->priv before calling thermal_cooling_device_register().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-24 20:50:43 +08:00
Rob Herring
970f04c840 dtc: checks: drop warning for missing PCI bridge bus-range
Cherry-picked from dtc upstream commit e1f139ea4900fd0324c646822b4061fec6e08321.

Having a 'bus-range' property for PCI bridges should not be required,
so remove the warning when missing. There was some confusion with the
Linux kernel printing a message that no property is present and the OS
assigned the bus number. This message was intended to be informational
rather than a warning.

When the firmware doesn't enumerate the PCI bus and leaves it up to the
OS to do, then it is perfectly fine for the OS to assign bus numbers
and bus-range is not necessary.

There are a few cases where bus-range is needed or useful as Arnd
Bergmann summarized:

- Traditionally Linux avoided using multiple PCI domains, but instead
  configured separate PCI host bridges to have non-overlapping
  bus ranges so we can present them to user space as a single
  domain, and run the kernel without CONFIG_PCI_DOMAINS.
  Specifying the bus ranges this way would and give stable bus
  numbers across boots when the probe order is not fixed.

- On certain ARM64 systems, we must only use the first
  128 bus numbers based on the way the IOMMU identifies
  the device with truncated bus/dev/fn number. There are probably
  others like this, with various limitations.

- To leave some room for hotplugged devices, each slot on
  a host bridge can in theory get a range of bus numbers
  that are available when assigning bus numbers at boot time

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-24 07:47:40 -05:00
Mika Kuoppala
1c3c1dc66a drm/i915: Add compiler barrier to wait_for
We need to be careful to not let compiler evaluate
the expiration and the operation on it's terms.

Document and enforce that COND will be evaluated
before checking timeout expiration.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-2-mika.kuoppala@linux.intel.com
2018-04-24 15:46:27 +03:00
Mika Kuoppala
3085982c6b drm/i915: Use ktime on wait_for
We use jiffies to determine when wait expires. However
Imre did find out that jiffies can and will do a >1
increments on certain situations [1]. When this happens
in a wait_for loop, we return timeout errorneously
much earlier than what the real wallclock would say.

We can't afford our waits to timeout prematurely.
Discard jiffies and change to ktime to detect timeouts.

v2: added bugzilla entry (Imre), added stable (Chris)

Reported-by: Imre Deak <imre.deak@intel.com>
References: https://lkml.org/lkml/2018/4/18/798 [1]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-1-mika.kuoppala@linux.intel.com
2018-04-24 15:46:26 +03:00
Jagan Teki
818668055c arm64: dts: allwinner: a64: bananapi-m64: add usb otg
Add usb otg support for bananapi-m64 board,
- USB-ID connected with PH9
- USB-DRVVBUS controlled by N_VBUSEN pin from PMIC

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-04-24 20:19:20 +08:00
Jagan Teki
61e9e15f17 arm64: dts: allwinner: axp803: Add drivevbus regulator
Add reg_drivevbus regualtor for boards which are using
external regulator to drive the OTG VBus through N_VBUSEN
PMIC pin.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-04-24 20:19:05 +08:00
Daniel Vetter
dd388ee1ec drm/xen-front: use simple display pipe prepare_fb helper
I missed this one because on an older tree.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xen.org
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch
2018-04-24 14:02:53 +02:00
Daniel Vetter
30d23f220c drm/atomic: better doc for implicit vs explicit fencing
Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.

I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.

v2: Comments from Eric.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
2018-04-24 14:01:15 +02:00
Daniel Vetter
244cb3dd22 drm/mxsfb: Use simple_display_pipe prepare_fb helper
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-6-daniel.vetter@ffwll.ch
2018-04-24 13:58:43 +02:00
Daniel Vetter
f2b5a62165 drm/pl111: Use simple_display_pipe prepare_fb helper
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-5-daniel.vetter@ffwll.ch
2018-04-24 13:58:24 +02:00
Daniel Vetter
78172ad85b drm/tve200: Use simple_display_pipe prepare_fb helper
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-4-daniel.vetter@ffwll.ch
2018-04-24 13:58:06 +02:00
Daniel Vetter
ccc3b2b348 drm: Move simple_display_pipe prepare_fb helper into gem fb helpers
There's nothing tinydrm specific to this, and there's a few more
copies of the same in various other drivers.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-3-daniel.vetter@ffwll.ch
2018-04-24 13:57:22 +02:00
Daniel Vetter
3fbe86be6c drm/vmwgfx: Remove no-op prepare/cleanup_fb callbacks
Less hits to go through when I git grep over all drivers. These
callbacks are optional.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-2-daniel.vetter@ffwll.ch
2018-04-24 13:57:11 +02:00
Takashi Sakamoto
10412c420a ALSA: dice: fix OUI for TC group
OUI for TC Electronic is 0x000166, for TC GROUP A/S. 0x001486 is for Echo
Digital Audio Corporation.

Fixes: 7cafc65b3a ('ALSA: dice: force to add two pcm devices for listed models')
Cc: <stable@vger.kernel.org> # v4.6+
Reference: http://standards-oui.ieee.org/oui/oui.txt
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24 13:51:35 +02:00
Hans de Goede
f55826f043 drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 320
The Lenovo Ideapad Mixx 320 laptop uses a portrait LCD panel, add a
quirk for this.

While at it instead of duplicating the same drm_dmi_panel_orientation_data
for 3 laptops add a generic lcd800x1280_rightside_up orientation_data and
use that for all 3 (including the new Mixx 320 entry).

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-2-hdegoede@redhat.com
2018-04-24 13:43:45 +02:00
Hans de Goede
068b01d843 drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 310
Some production batches of the Lenovo Ideapad Mixx 310 laptop use
a portrait LCD panel, add a quirk for this.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-1-hdegoede@redhat.com
2018-04-24 13:43:44 +02:00
Takashi Iwai
a9c2dfc852 ALSA: hda - Use a macro for snd_array iteration loops
Introduce a new helper macro, snd_array_for_each(), to iterate for
each snd_array element.  It slightly improves the readability than
lengthy open codes at each place.

Along with it, add const prefix to some obvious places.

There should be no functional changes by this.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24 13:41:53 +02:00
Takashi Iwai
1d8d6428d1 ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
The Dell Dock USB-audio device with 0bda:4014 is behaving notoriously
bad, and we have already applied some workaround to avoid the firmware
hiccup.  Yet we still need to skip one thing, the Extension Unit at ID
4, which doesn't react correctly to the mixer ctl access.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1090658
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24 13:39:30 +02:00
Takashi Iwai
2b54f785b4 ALSA: usb-audio: Fix missing endian conversion
The UAC2 jack detection support introduced the bmControls checks in a
couple of places, but they forgot the endian conversion; the
bmControls of UAC2 terminal descriptor is __le16, not a byte like in
UAC1.

Fixes: 5a222e8494 ("ALSA: usb-audio: UAC2 jack detection")
Tested-by: Andrew Chant <achant@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24 13:36:28 +02:00
Ard Biesheuvel
ac1e55b1fd ACPI / button: make module loadable when booted in non-ACPI mode
Modules such as nouveau.ko and i915.ko have a link time dependency on
acpi_lid_open(), and due to its use of acpi_bus_register_driver(),
the button.ko module that provides it is only loadable when booted in
ACPI mode. However, the ACPI button driver can be built into the core
kernel as well, in which case the dependency can always be satisfied,
and the dependent modules can be loaded regardless of whether the
system was booted in ACPI mode or not.

So let's fix this asymmetry by making the ACPI button driver loadable
as a module even if not booted in ACPI mode, so it can provide the
acpi_lid_open() symbol in the same way as when built into the kernel.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ rjw: Minor adjustments of comments, whitespace and names. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24 12:47:34 +02:00
Prashanth Prakash
b382bf8852 ACPI / CPPC: Document CPPC sysfs interface
Add a file to describe the CPPC sysfs interface and steps to compute
average delivered performance using the feedback counters.

Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
[ rjw: Minor adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24 12:33:28 +02:00
Prashanth Prakash
256f19d212 cpufreq / CPPC: Support for CPPC v3
Use CPPC v3 entries to convert the abstract processor performance to
processor frequency in KHz.

Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24 12:33:28 +02:00
Prashanth Prakash
6fa12d584d ACPI / CPPC: Check for valid PCC subspace only if PCC is used
Changes the behavior where we return error if there are no valid PCC
subspace for a given performance domain.

The ACPI spec does not mandate the use PCC, so it is possible to have
platforms where a PCC subspace may not be present, so we need to check
for a valid PCC subspace ID only if the register is a PCC register.

Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-24 12:33:28 +02:00