Commit graph

781,636 commits

Author SHA1 Message Date
Manasi Navare
c92f47b5ec drm/i915/icl: Add register defs for voltage swing sequences for MG PHY DDI
On Icelake platform, MG PHY is used when operating in DP alternate
mode or the legacy HDMI or DP modes. DDI Ports C, D, E, F are MG PHY
DDI ports on ICL.

This patch adds the necessary voltage swing programming related
register definitions and macros for MG PHY DDI ports.

v4 (from Paulo):
* Use _PORT instead of _PICK
* Change some mask names to our current coding standards
* Stay under 80 columns
v3:
* Rebase on new revision of patches
v2:
* Remove whitespaces in the #defines (Paulo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323172419.24911-4-paulo.r.zanoni@intel.com
2018-03-23 14:56:27 -07:00
Manasi Navare
19b904f8df drm/i915/icl: Add Combo PHY DDI Buffer translation tables for Icelake.
These tables are used on voltage vswing sequence initialization on
Icelake.

The swing_sel on the spec's table is defined in a 4 bits binary like
1010.  However the register bits are split in upper 1 bit swing_sel
and lower 3 bits swing sel.

In this table here we store this value as a single value in hex like
it is mentioned in the Bspec and split it to the upper and lower bit
values only while programming the registers.

For instance: b1010 is written as 0xA and then while writing to the
register, the upper 1 bit is obtained by (0xA & 0x8) and shifting by
appropriate bits while lower 3 bits are obtained by (0xA & 0x7) and
shifting by appropriate bits.

Some of the columns need to be updated after the spec is updated.

v5 (from Paulo):
* Checkpatch fixes.
v4 (from Paulo):
* Fix minor typo
* Coding style conformance
v3:
* Get rid of HDMI/DVI tables, same as DP (Paulo)
* Use combo_phy in ddi buf trans table defs (Paulo)
v2:
* Added DW4_scaling_hex column to the translation tables (Rodrigo)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323172419.24911-3-paulo.r.zanoni@intel.com
2018-03-23 14:55:23 -07:00
Shannon Nelson
1db685e676 ixgbe: no need for esp trailer if GSO
There is no need to calculate the trailer length if we're doing
a GSO/TSO, as there is no trailer added to the packet data.
Also, don't bother clearing the flags field as it was already
cleared earlier.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23 14:55:10 -07:00
Manasi Navare
5bb975de3f drm/i915/icl: Add register definitions for Combo PHY vswing sequences.
This patch defines register definitions required for ICL voltage
vswing programming for Combo PHY DDI Ports. It uses the same bit
definitions and macros as the CNL voltage swing sequences.

v8 (from Paulo):
* Rebase.
v7:
* Kill _MMIIO_PORT2_LN (Paulo)
v6:
* Replace some spaces with TAB (Paulo)
v5:
* Use _PORT instead of _PICK (Paulo)
* Remove DW7 defs for ICL, not used (Paulo)
v4:
* Rebase after _PICK was used instead of _PORT3
* Use _PICK for _MMIO_PORT2 since address of B is less
than address of A so cant use the math (Paulo)
v3:
* Make changes to the existing macro in a diff patch (Paulo)
v2:
* Add new defs fro ICL regs (Paulo)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323172419.24911-2-paulo.r.zanoni@intel.com
2018-03-23 14:52:36 -07:00
Shannon Nelson
871dd09bdb ixgbe: remove unneeded ipsec test in TX path
Since the ipsec data fields will be zero anyway in the non-ipsec
case, we can remove the conditional jump.

Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23 14:51:57 -07:00
Shannon Nelson
2137aec017 ixgbe: no need for ipsec csum feature check
With the patch
commit f8aa2696b4af ("esp: check the NETIF_F_HW_ESP_TX_CSUM bit before segmenting")
we no longer need to protect ourself from checksum
offload requests on IPsec packets, so we can remove
the check in our .ndo_features_check callback.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23 14:50:41 -07:00
Paul Greenwalt
9bf1e20f65 ixgbe: fix read-modify-write in x550 phy setup
Replaced an assignment operation with an OR operation.

The variable assignment was overwriting the value read from the PHY
register. The OR operation sets only the intended register bits.

The bits that were being overwritten are reserved, so the assignment had no
functional impact.

Reported by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23 14:49:07 -07:00
Claudio Scordino
e97a90f706 sched/cpufreq: Rate limits for SCHED_DEADLINE
When the SCHED_DEADLINE scheduling class increases the CPU utilization, it
should not wait for the rate limit, otherwise it may miss some deadline.

Tests using rt-app on Exynos5422 with up to 10 SCHED_DEADLINE tasks have
shown reductions of even 10% of deadline misses with a negligible
increase of energy consumption (measured through Baylibre Cape).

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/1520937340-2755-1-git-send-email-claudio@evidence.eu.com
2018-03-23 22:48:22 +01:00
Michael Ellerman
a26cf1c9fe Merge branch 'topic/ppc-kvm' into next
This brings in two series from Paul, one of which touches KVM code and
may need to be merged into the kvm-ppc tree to resolve conflicts.
2018-03-24 08:43:18 +11:00
Paul Greenwalt
1aa37845f7 ixgbe: add status reg reads to ixgbe_check_remove
Add status register reads and delay between reads to ixgbe_check_remove.
Registers can read 0xFFFFFFFF during PCI reset, which causes the driver
to remove the adapter. The additional status register reads can reduce the
chance of this race condition.

If the status register is not 0xFFFFFFFF, then ixgbe_check_remove returns
the value of the register being read.

Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23 14:18:26 -07:00
Takashi Iwai
40cab6e88c ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams
OSS PCM stream management isn't modal but it allows ioctls issued at
any time for changing the parameters.  In the previous hardening
patch ("ALSA: pcm: Avoid potential races between OSS ioctls and
read/write"), we covered these races and prevent the corruption by
protecting the concurrent accesses via params_lock mutex.  However,
this means that some ioctls that try to change the stream parameter
(e.g. channels or format) would be blocked until the read/write
finishes, and it may take really long.

Basically changing the parameter while reading/writing is an invalid
operation, hence it's even more user-friendly from the API POV if it
returns -EBUSY in such a situation.

This patch adds such checks in the relevant ioctls with the addition
of read/write access refcount.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-23 22:18:05 +01:00
Takashi Iwai
02a5d6925c ALSA: pcm: Avoid potential races between OSS ioctls and read/write
Although we apply the params_lock mutex to the whole read and write
operations as well as snd_pcm_oss_change_params(), we may still face
some races.

First off, the params_lock is taken inside the read and write loop.
This is intentional for avoiding the too long locking, but it allows
the in-between parameter change, which might lead to invalid
pointers.  We check the readiness of the stream and set up via
snd_pcm_oss_make_ready() at the beginning of read and write, but it's
called only once, by assuming that it remains ready in the rest.

Second, many ioctls that may change the actual parameters
(i.e. setting runtime->oss.params=1) aren't protected, hence they can
be processed in a half-baked state.

This patch is an attempt to plug these holes.  The stream readiness
check is moved inside the read/write inner loop, so that the stream is
always set up in a proper state before further processing.  Also, each
ioctl that may change the parameter is wrapped with the params_lock
for avoiding the races.

The issues were triggered by syzkaller in a few different scenarios,
particularly the one below appearing as GPF in loopback_pos_update.

Reported-by: syzbot+c4227aec125487ec3efa@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-23 22:17:56 +01:00
Mika Westerberg
13d3047c81 ACPI / hotplug / PCI: Check presence of slot itself in get_slot_status()
Mike Lothian reported that plugging in a USB-C device does not work
properly in his Dell Alienware system.  This system has an Intel Alpine
Ridge Thunderbolt controller providing USB-C functionality.  In these
systems the USB controller (xHCI) is hotplugged whenever a device is
connected to the port using ACPI-based hotplug.

The ACPI description of the root port in question is as follows:

  Device (RP01)
  {
      Name (_ADR, 0x001C0000)

      Device (PXSX)
      {
          Name (_ADR, 0x02)

          Method (_RMV, 0, NotSerialized)
          {
              // ...
          }
      }

Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01)
but that seems to be incorrect because device 0 is the upstream port of the
Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge
itself).  When we get ACPI Notify() to the root port resulting from
connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0,
function 2 which of course always returns 0xffffffff because there is no
such function and we never find the device.

In Windows this works fine.

Now, since we get ACPI Notify() to the root port and not to the PXSX device
we should actually start our scan from there as well and not from the
non-existent PXSX device.  Fix this by checking presence of the slot itself
(function 0) if we fail to do that otherwise.

While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is
the recommended way to read Device and Vendor IDs of devices on PCI buses.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
2018-03-23 16:11:00 -05:00
Nobutaka Okabe
f3b906d720 ALSA: usb-audio: Integrate native DSD support for ITF-USB based DACs.
Integrate the native DSD support quirk codes of "ITF-USB DSD" based DACs.

Now, "is_itf_usb_dsd_2alts_dac()" and "is_itf_usb_dsd_3alts_dac()" is
integrated into one function "is_itf_usb_dsd_dac()".
So, remove the logic to distinguish UD-501 and UD-501V2 by the
"Product Name".

The integration is possible by changing the following two functions.

- snd_usb_select_mode_quirk():
Change the determination condition of the DSD mode switch command,
from the altset number being used, to the audio format being played.
Actually, this operation is same as playback using ASIO driver in
Windows environment.

- snd_usb_interface_dsd_format_quirk():
To which altset supports native DSD is determined by the number of altsets.
Previously, it's a constant "2" or "3".

Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-23 22:09:32 +01:00
Nobutaka Okabe
74dc71f83e ALSA: usb-audio: FIX native DSD support for TEAC UD-501 DAC
There are two versions of TEAC UD-501, the normal version and
the vendor updated version(UD-501V2).

They have the same VID/PID, but the num of the altsetting is different,
UD-501 has 2 altsets for stream, and UD-501V2 has 3.

So, add the logic to distinguish them by the Product Name, not by the PID.

Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-23 22:09:32 +01:00
Nobutaka Okabe
71426535f4 ALSA: usb-audio: Add native DSD support for Luxman DA-06
Add native DSD support quirk for Luxman DA-06 DAC, by adding the
PID/VID 1852:5065.

Rename "is_marantz_denon_dac()" function to "is_itf_usb_dsd_2alts_dac()"
to cover broader device family sharing the same USB audio
implementation(*).
For the same reason, rename "is_teac_dsd_dac()" function to
"is_itf_usb_dsd_3alts_dac()".

(*)
These devices have the same USB controller "ITF-USB DSD", supplied by
INTERFACE Co., Ltd.
"ITF-USB DSD" USB controller has two patterns,

Pattern 1. (2 altsets version)
- Altset 0: for control
- Altset 1: for stream (S32)
- Altset 2: for stream (S32, DSD_U32)

Pattern 2. (3 altsets version)
- Altset 0: for control
- Altset 1: for stream (S16)
- Altset 2: for stream (S32)
- Altset 3: for stream (S32, DSD_U32)

"is_itf_usb_dsd_2alts_dac()" returns true, if the DAC has "Pattern 1"
USB controller, and "is_itf_usb_dsd_3alts_dac()" returns true, if
"Pattern2".

Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-23 22:08:59 +01:00
Takashi Iwai
3446b1e962 Merge branch 'for-linus' into for-next
Back-merge for applying more series of fixes for USB DSD support.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-23 22:03:29 +01:00
Nobutaka Okabe
b00214865d ALSA: usb-audio: Add native DSD support for TEAC UD-301
Add native DSD support quirk for TEAC UD-301 DAC,
by adding the PID/VID 0644:804a.

Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-23 21:59:12 +01:00
Jason Gunthorpe
f64705b871 RDMA/ocrdma: Fix structure layout for ocrdma_alloc_pd
The udata's for alloc_pd cannot contain u64s due to alignment
constraints. Switch the two never-used u64's to arrays of u32 to reduce
the required struct alignment to 4 bytes.

These reserved fields are totally unnecessary, never written and never
read.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-23 14:53:29 -06:00
James Morris
ed807f6aaf tpmdd updates for Linux 4.17
-----BEGIN PGP SIGNATURE-----
 
 iQJUBAABCgA+FiEEmiawYN7xokcVSACRcXm3ZwSroYsFAlq0ySUgHGphcmtrby5z
 YWtraW5lbkBsaW51eC5pbnRlbC5jb20ACgkQcXm3ZwSroYuMnA//ea4Coy9kXU4f
 3yr++BXhsK0C2AXvCy5CcK0l06EUtaxShLOZGrRIRlIH4wYczWzIm7woOd/pyyqA
 uB9AtItyfemvcoHHBNv2FRvV2pJkOyCcamupayQaAMJuieTDECm9ajFfU9NlOaLZ
 xfKuE9R83ABwkjMyg+c0xIDh/jkG2FT1ypnqe8WEaj94KjT5pm1ZxKK8ILRHrjVR
 3gvx9iH8ydnzCEDVAYRVdAn2g25sYWJ0faJpvpZ1FmdQizhLPF5r8yizyJsdqNno
 rUfxZm2NocDOxcdYzzdCu2jrzyKdc6ftKSf/Z9cQo9WbCTSQ0pEFkTvMPtnJuq/I
 1+BKEnMgLJbqNOKCVUc9Gp+AAJ4d7GZQ72NNP9jMI8Ex9bR+BivgfMScYP9bPrAq
 D+cw4YgW9ql2jVXsS4vj1lryuYvY9JpsSnQ0UZ4zwoQOXXicQxsbuzrHEu8BnnKw
 innjYGAaZV34RTVrNT/6SeUmffOw8z4HPXpVMRCank9S7Ond9s/SS9qZ1QYV9Lx5
 raq0WLrHyBcIioMnIgmMwDL/ApIPdzhhu4fSsmEcucLYP5o1CHlW2xMrlb6Cwsej
 8B3Vjvr7ELu8gTJk8Gj/Hf8n5Y3+Qv929nOVU435Tv9cSCLJXsm3mhYZRzOxTidw
 whAeDpdbG4QPPf5keOJRYohi5pdP0rE=
 =LGed
 -----END PGP SIGNATURE-----

Merge tag 'tpmdd-next-20180323' of git://git.infradead.org/users/jjs/linux-tpmdd into next-tpm

tpmdd updates for Linux 4.17 from Jarkko:

"This release contains only bug fixes. There are no new major features
added."
2018-03-24 07:48:26 +11:00
Andy Lutomirski
d8ba61ba58 x86/entry/64: Don't use IST entry for #BP stack
There's nothing IST-worthy about #BP/int3.  We don't allow kprobes
in the small handful of places in the kernel that run at CPL0 with
an invalid stack, and 32-bit kernels have used normal interrupt
gates for #BP forever.

Furthermore, we don't allow kprobes in places that have usergs while
in kernel mode, so "paranoid" is also unnecessary.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
2018-03-23 21:10:36 +01:00
Arnaldo Carvalho de Melo
980b68ec06 perf annotate: Use absolute addresses to calculate jump target offsets
These types of jumps were confusing the annotate browser:

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
  Percent│ffffffff81a00020:   swapgs
  <SNIP>
         │ffffffff81a00128: ↓ jae    ffffffff81a00139 <syscall_return_via_sysret+0x53>
  <SNIP>
         │ffffffff81a00155: → jmpq   *0x825d2d(%rip)   # ffffffff82225e88 <pv_cpu_ops+0xe8>

I.e. the syscall_return_via_sysret function is actually "inside" the
entry_SYSCALL_64 function, and the offsets in jumps like these (+0x53)
are relative to syscall_return_via_sysret, not to syscall_return_via_sysret.

Or this may be some artifact in how the assembler marks the start and
end of a function and how this ends up in the ELF symtab for vmlinux,
i.e. syscall_return_via_sysret() isn't "inside" entry_SYSCALL_64, but
just right after it.

From readelf -sw vmlinux:

 80267: ffffffff81a00020   315 NOTYPE  GLOBAL DEFAULT    1 entry_SYSCALL_64
   316: ffffffff81a000e6     0 NOTYPE  LOCAL  DEFAULT    1 syscall_return_via_sysret

 0xffffffff81a00020 + 315 > 0xffffffff81a000e6

So instead of looking for offsets after that last '+' sign, calculate
offsets for jump target addresses that are inside the function being
disassembled from the absolute address, 0xffffffff81a00139 in this case,
subtracting from it the objdump address for the start of the function
being disassembled, entry_SYSCALL_64() in this case.

So, before this patch:

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
Percent│       pop    %r10
       │       pop    %r9
       │       pop    %r8
       │       pop    %rax
       │       pop    %rsi
       │       pop    %rdx
       │       pop    %rsi
       │       mov    %rsp,%rdi
       │       mov    %gs:0x5004,%rsp
       │       pushq  0x28(%rdi)
       │       pushq  (%rdi)
       │       push   %rax
       │     ↑ jmp    6c
       │       mov    %cr3,%rdi
       │     ↑ jmp    62
       │       mov    %rdi,%rax
       │       and    $0x7ff,%rdi
       │       bt     %rdi,%gs:0x2219a
       │     ↑ jae    53
       │       btr    %rdi,%gs:0x2219a
       │       mov    %rax,%rdi
       │     ↑ jmp    5b

After:

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
  0.65 │     → jne    swapgs_restore_regs_and_return_to_usermode
       │       pop    %r10
       │       pop    %r9
       │       pop    %r8
       │       pop    %rax
       │       pop    %rsi
       │       pop    %rdx
       │       pop    %rsi
       │       mov    %rsp,%rdi
       │       mov    %gs:0x5004,%rsp
       │       pushq  0x28(%rdi)
       │       pushq  (%rdi)
       │       push   %rax
       │     ↓ jmp    132
       │       mov    %cr3,%rdi
       │    ┌──jmp    128
       │    │  mov    %rdi,%rax
       │    │  and    $0x7ff,%rdi
       │    │  bt     %rdi,%gs:0x2219a
       │    │↓ jae    119
       │    │  btr    %rdi,%gs:0x2219a
       │    │  mov    %rax,%rdi
       │    │↓ jmp    121
       │119:│  mov    %rax,%rdi
       │    │  bts    $0x3f,%rdi
       │121:│  or     $0x800,%rdi
       │128:└─→or     $0x1000,%rdi
       │       mov    %rdi,%cr3
       │132:   pop    %rax
       │       pop    %rdi
       │       pop    %rsp
       │     → jmpq   *0x825d2d(%rip)        # ffffffff82225e88 <pv_cpu_ops+0xe8>

With those at least navigating to the right destination, an improvement
for these cases seems to be to be to somehow mark those inner functions,
which in this case could be:

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
       │syscall_return_via_sysret:
       │       pop    %r15
       │       pop    %r14
       │       pop    %r13
       │       pop    %r12
       │       pop    %rbp
       │       pop    %rbx
       │       pop    %rsi
       │       pop    %r10
       │       pop    %r9
       │       pop    %r8
       │       pop    %rax
       │       pop    %rsi
       │       pop    %rdx
       │       pop    %rsi
       │       mov    %rsp,%rdi
       │       mov    %gs:0x5004,%rsp
       │       pushq  0x28(%rdi)
       │       pushq  (%rdi)
       │       push   %rax
       │     ↓ jmp    132
       │       mov    %cr3,%rdi
       │    ┌──jmp    128
       │    │  mov    %rdi,%rax
       │    │  and    $0x7ff,%rdi
       │    │  bt     %rdi,%gs:0x2219a
       │    │↓ jae    119
       │    │  btr    %rdi,%gs:0x2219a
       │    │  mov    %rax,%rdi
       │    │↓ jmp    121
       │119:│  mov    %rax,%rdi
       │    │  bts    $0x3f,%rdi
       │121:│  or     $0x800,%rdi
       │128:└─→or     $0x1000,%rdi
       │       mov    %rdi,%cr3
       │132:   pop    %rax
       │       pop    %rdi
       │       pop    %rsp
       │     → jmpq   *0x825d2d(%rip)        # ffffffff82225e88 <pv_cpu_ops+0xe8>

This all gets much better viewed if one uses 'perf report --ignore-vmlinux'
forcing the usage of /proc/kcore + /proc/kallsyms, when the above
actually gets down to:

  # perf report --ignore-vmlinux
  ## do '/64', will show the function names containing '64',
  ## navigate to /entry_SYSCALL_64_after_hwframe.annotation,
  ## press 'A' to annotate, then 'P' to print that annotation
  ## to a file
  ## From another xterm (or see on screen, this 'P' thing is for
  ## getting rid of those right side scroll bars/spaces):
  # cat /entry_SYSCALL_64_after_hwframe.annotation
  entry_SYSCALL_64_after_hwframe() /proc/kcore
  Event: cycles:ppp

  Percent
              Disassembly of section load0:

              ffffffff9aa00044 <load0>:
   11.97        push   %rax
    4.85        push   %rdi
                push   %rsi
    2.59        push   %rdx
    2.27        push   %rcx
    0.32        pushq  $0xffffffffffffffda
    1.29        push   %r8
                xor    %r8d,%r8d
    1.62        push   %r9
    0.65        xor    %r9d,%r9d
    1.62        push   %r10
                xor    %r10d,%r10d
    5.50        push   %r11
                xor    %r11d,%r11d
    3.56        push   %rbx
                xor    %ebx,%ebx
    4.21        push   %rbp
                xor    %ebp,%ebp
    2.59        push   %r12
    0.97        xor    %r12d,%r12d
    3.24        push   %r13
                xor    %r13d,%r13d
    2.27        push   %r14
                xor    %r14d,%r14d
    4.21        push   %r15
                xor    %r15d,%r15d
    0.97        mov    %rsp,%rdi
    5.50      → callq  do_syscall_64
   14.56        mov    0x58(%rsp),%rcx
    7.44        mov    0x80(%rsp),%r11
    0.32        cmp    %rcx,%r11
              → jne    swapgs_restore_regs_and_return_to_usermode
    0.32        shl    $0x10,%rcx
    0.32        sar    $0x10,%rcx
    3.24        cmp    %rcx,%r11
              → jne    swapgs_restore_regs_and_return_to_usermode
    2.27        cmpq   $0x33,0x88(%rsp)
    1.29      → jne    swapgs_restore_regs_and_return_to_usermode
                mov    0x30(%rsp),%r11
    8.74        cmp    %r11,0x90(%rsp)
              → jne    swapgs_restore_regs_and_return_to_usermode
    0.32        test   $0x10100,%r11
              → jne    swapgs_restore_regs_and_return_to_usermode
    0.32        cmpq   $0x2b,0xa0(%rsp)
    0.65      → jne    swapgs_restore_regs_and_return_to_usermode

I.e. using kallsyms makes the function start/end be done differently
than using what is in the vmlinux ELF symtab and actually the hits
goes to entry_SYSCALL_64_after_hwframe, which is a GLOBAL() after the
start of entry_SYSCALL_64:

  ENTRY(entry_SYSCALL_64)
          UNWIND_HINT_EMPTY
  <SNIP>
          pushq   $__USER_CS                      /* pt_regs->cs */
          pushq   %rcx                            /* pt_regs->ip */
  GLOBAL(entry_SYSCALL_64_after_hwframe)
          pushq   %rax                            /* pt_regs->orig_ax */

          PUSH_AND_CLEAR_REGS rax=$-ENOSYS

And it goes and ends at:

          cmpq    $__USER_DS, SS(%rsp)            /* SS must match SYSRET */
          jne     swapgs_restore_regs_and_return_to_usermode

          /*
           * We win! This label is here just for ease of understanding
           * perf profiles. Nothing jumps here.
           */
  syscall_return_via_sysret:
          /* rcx and r11 are already restored (see code above) */
          UNWIND_HINT_EMPTY
          POP_REGS pop_rdi=0 skip_r11rcx=1

So perhaps some people should really just play with '--ignore-vmlinux'
to force /proc/kcore + kallsyms.

One idea is to do both, i.e. have a vmlinux annotation and a
kcore+kallsyms one, when possible, and even show the patched location,
etc.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-r11knxv8voesav31xokjiuo6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23 16:46:53 -03:00
Arnaldo Carvalho de Melo
c448234cfe perf annotate: Defer searching for comma in raw line till it is needed
That strchr() in jump__scnprintf() needs to be nuked somehow, as it,
IIRC is already done in jump__parse() and if needed at scnprintf() time,
should be stashed in the struct filled in parse() time.

For now jus defer it to just before where it is used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j0t5hagnphoz9xw07bh3ha3g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23 16:46:19 -03:00
Arnaldo Carvalho de Melo
e4cc91b802 perf annotate: Support jumping from one function to another
For instance:

  entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
    5.50 │     → callq  do_syscall_64
   14.56 │       mov    0x58(%rsp),%rcx
    7.44 │       mov    0x80(%rsp),%r11
    0.32 │       cmp    %rcx,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       shl    $0x10,%rcx
    0.32 │       sar    $0x10,%rcx
    3.24 │       cmp    %rcx,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    2.27 │       cmpq   $0x33,0x88(%rsp)
    1.29 │     → jne    swapgs_restore_regs_and_return_to_usermode
         │       mov    0x30(%rsp),%r11
    8.74 │       cmp    %r11,0x90(%rsp)
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       test   $0x10100,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       cmpq   $0x2b,0xa0(%rsp)
    0.65 │     → jne    swapgs_restore_regs_and_return_to_usermode

It'll behave just like a "call" instruction, i.e. press enter or right
arrow over one such line and the browser will navigate to the annotated
disassembly of that function, which when exited, via left arrow or esc,
will come back to the calling function.

Now to support jump to an offset on a different function...

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-78o508mqvr8inhj63ddtw7mo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23 16:46:18 -03:00
Arnaldo Carvalho de Melo
2eff061162 perf annotate: Add "_local" to jump/offset validation routines
Because they all really check if we can access data structures/visual
constructs where a "jump" instruction targets code in the same function,
i.e. things like:

  __pthread_mutex_lock  /usr/lib64/libpthread-2.26.so
  1.95 │       mov    __pthread_force_elision,%ecx
       │    ┌──test   %ecx,%ecx
  0.07 │    ├──je     60
       │    │  test   $0x300,%esi
       │    │↓ jne    60
       │    │  or     $0x100,%esi
       │    │  mov    %esi,0x10(%rdi)
       │ 42:│  mov    %esi,%edx
       │    │  lea    0x16(%r8),%rsi
       │    │  mov    %r8,%rdi
       │    │  and    $0x80,%edx
       │    │  add    $0x8,%rsp
       │    │→ jmpq   __lll_lock_elision
       │    │  nop
  0.29 │ 60:└─→and    $0x80,%esi
  0.07 │       mov    $0x1,%edi
  0.29 │       xor    %eax,%eax
  2.53 │       lock   cmpxchg %edi,(%r8)

And not things like that "jmpq __lll_lock_elision", that instead should behave
like a "call" instruction and "jump" to the disassembly of "___lll_lock_elision".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3cwx39u3h66dfw9xjrlt7ca2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23 16:46:16 -03:00
Petr Machata
83428f2fad perf python: Reference Py_None before returning it
Python None objects are handled just like all the other objects with
respect to their reference counting. Before returning Py_None, its
reference count thus needs to be bumped.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@mellanox.com>
Link: http://lkml.kernel.org/r/b1e565ecccf68064d8d54f37db5d028dda8fa522.1521675563.git.petrm@mellanox.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23 16:45:20 -03:00
Felix Kuehling
5ae0283e83 drm/amdgpu: Add userptr support for KFD
This adds support for allocating, mapping, unmapping and freeing
userptr BOs, and for handling MMU notifiers.

v2: updated a comment

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:32:33 -04:00
Felix Kuehling
6b95e7973a drm/amdkfd: Add quiesce_mm and resume_mm to kgd2kfd_calls
These interfaces allow KGD to stop and resume all GPU user mode queue
access to a process address space. This is needed for handling MMU
notifiers of userptrs mapped for GPU access in KFD VMs.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:32:32 -04:00
Felix Kuehling
d1853f42b6 drm/amdkfd: GFP_NOIO while holding locks taken in MMU notifier
When an MMU notifier runs in memory reclaim context, it can deadlock
trying to take locks that are already held in the thread causing the
memory reclaim. The solution is to avoid memory reclaim while holding
locks that are taken in MMU notifiers by using GFP_NOIO.

This commit fixes memory allocations done while holding the dqm->lock
which is needed in the MMU notifier (dqm->ops.evict_process_queues).

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:32:31 -04:00
Felix Kuehling
6e08e0995b drm/amdgpu: Avoid reclaim while holding locks taken in MMU notifier
When an MMU notifier runs in memory reclaim context, it can deadlock
trying to take locks that are already held in the thread causing the
memory reclaim. The solution is to avoid memory reclaim while holding
locks that are taken in MMU notifiers.

This commit fixes kmalloc while holding rmn->lock by moving the call
outside the lock. The GFX MMU notifier also locks reservation objects.
I have no good solution for avoiding reclaim while holding reservation
objects. The HSA MMU notifier will not lock any reservation objects.

v2: Moved allocation outside lock instead of using GFP_NOIO

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:32:30 -04:00
Felix Kuehling
0919195f2b drm/amdgpu: Enable amdgpu_ttm_tt_get_user_pages in worker threads
This commit allows amdgpu_ttm_tt_get_user_pages to work in a worker
thread rather than regular process context. This will be used when
KFD userptr BOs are restored after an MMU-notifier eviction.

v2: Manage task reference with get_task_struct/put_task_struct

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:32:29 -04:00
Felix Kuehling
e52482dec8 drm/amdgpu: Add MMU notifier type for KFD userptr
This commit adds the notion of MMU notifier types GFX and HSA. GFX
continues to work like MMU notifiers did before. HSA adds support for
KFD userptr BOs. The implementation of KFD userptr eviction is a stub
for now.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:32:28 -04:00
Felix Kuehling
1679ae8f8f drm/amdkfd: Use ordered workqueue to restore processes
Restoring multiple processes concurrently can lead to live-locks
where each process prevents the other from validating all its BOs.

v2: fix duplicate check of same variable

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:30:36 -04:00
Felix Kuehling
810955ba71 drm/amdgpu: Fix acquiring VM on large-BAR systems
On large-BAR systems the VM page tables for compute are accessed by
the CPU. Always allow CPU access to the page directory so that it can
be used later by the CPU when a VM is converted to a compute VM.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:30:35 -04:00
Felix Kuehling
72a01d231d drm/amdkfd: Deallocate SDMA queues correctly
Deallocate SDMA queues during abnormal process termination and when
queue creation fails after the SDMA allocation.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:30:34 -04:00
Felix Kuehling
c70a362687 drm/amdkfd: Fix scratch memory with HWS enabled
Program sh_hidden_private_base_vmid correctly in the map-process
PM4 packet.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-23 15:30:33 -04:00
Waiman Long
06ace26f4e x86/efi: Free efi_pgd with free_pages()
The efi_pgd is allocated as PGD_ALLOCATION_ORDER pages and therefore must
also be freed as PGD_ALLOCATION_ORDER pages with free_pages().

Fixes: d9e9a64180 ("x86/mm/pti: Allocate a separate user PGD")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1521746333-19593-1-git-send-email-longman@redhat.com
2018-03-23 20:18:31 +01:00
Christoph Hellwig
0803e6051c swiotlb: Make swiotlb_{alloc,free}_buffer depend on CONFIG_DMA_DIRECT_OPS
Otherwise this causes unused symbol warnings for configs that build
swiotlb.c only for use by xen-swiotlb.c and that don't otherwise select
CONFIG_DMA_DIRECT_OPS, which is possible on arm.

Fixes: 16e73adbca ("dma/swiotlb: Remove swiotlb_{alloc,free}_coherent()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: iommu@lists.linux-foundation.org
Cc: konrad.wilk@oracle.com
Link: https://lkml.kernel.org/r/20180323174930.17767-1-hch@lst.de
2018-03-23 20:15:38 +01:00
Dan Carpenter
d32ef547fd kvm: x86: hyperv: delete dead code in kvm_hv_hypercall()
"rep_done" is always zero so the "(((u64)rep_done & 0xfff) << 32)"
expression is just zero.  We can remove the "res" temporary variable as
well and just use "ret" directly.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-23 20:11:01 +01:00
Thomas Gleixner
ea89c06548 x86/tsc: Get rid of rdtscll()
Commit 99770737ca ("x86/asm/tsc: Add rdtscll() merge helper") added
rdtscll() in August 2015 along with the comment:

 /* Deprecated, keep it for a cycle for easier merging: */

12 cycles later it's really overdue for removal.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-03-23 20:07:54 +01:00
Andreas Gruenbacher
bb491ce67a gfs2: Check for the end of metadata in punch_hole
When punching a hole or truncating an inode down to a given size, also
check if the truncate point / start of the hole is within the range we
have metadata for.  Otherwise, we can end up freeing blocks that
shouldn't be freed, corrupting the inode, or crashing the machine when
trying to punch a hole into the void.

When growing an inode via truncate, we set the new size but we don't
allocate additional levels of indirect blocks and grow the inode height.
When shrinking that inode again, the new size may still point beyond the
end of the inode's metadata.

Fixes xfstest generic/476.

Debugged-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-03-23 11:43:02 -07:00
Joel Stanley
156383b190 Documentation: Mention why %p prints ptrval
When debugging recent kernels, people will see '(ptrval)' but there
isn't much information as to what that means. Briefly describe why it's
there.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-23 12:42:18 -06:00
Mauro Carvalho Chehab
bf02d49123 COPYING: use the new text with points to the license files
Now that we have a new COPYING file with points to the
Linux license files, replace it with the old content.

This patch does:
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename COPYING.new => COPYING (100%)

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-23 12:41:45 -06:00
Mauro Carvalho Chehab
88de995ccf COPYING: create a new file with points to the Kernel license files
With the addition of SPDX patchset, the contents of COPYING file
is now duplicated at two other files under LICENSE:
	LICENSES/preferred/GPL-2.0
	LICENSES/exceptions/Linux-syscall-note

It is easy to check that the contents of the licence written on
those files are identical with COPYING using:

	$ diff -upr COPYING LICENSES/preferred/GPL-2.0
	$ diff -upr COPYING LICENSES/exceptions/Linux-syscall-note|less

Also, a new file was added, with describes how SPDX should work at
the Kernel source files:
	Documentation/process/license-rules.rst

Instead fo having it copying the contents of two files, and not
even mentioning the third one, replace it by a file whose content
points to the other tree files, preserving the Kernel's license.

Adjust license-rules.rst accordingly.

Please notice that this file preserves the Kernel license as
is, without any changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-23 12:41:35 -06:00
Linus Torvalds
86d043d47c MIPS fixes for 4.16-rc7
Another miscellaneous pile of MIPS fixes for 4.16:
 
  - lantiq: fixes for clocks and Amazon SE (4.14)
 
  - ralink: fix booting on MT7621 (4.5)
 
  - ralink: fix halt (3.9)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlq00w4ACgkQbAtpk944
 dnpDcQ//SdhTT5qp+ZeD7R7Xb9o3uxdpttQynPFNYputfZnfozvxqoXSTCHPX9Y/
 revuLCshu2qNXhW244jizs9znNjKtj2RspaqHgA63TD5wN8nTaRQI6LtdtcxlSqP
 siElcBQU50IIMT2IErrfl4FB3SPQF69kgF6JcZL/UUBprgSQePT2wxQnDcAUPP3X
 VQFIDGdgOBczAIQehUaiRCk1ODeBXsSVOgwwkbQIDPw3vBvisGBqT3LULthw1Lbn
 dKrBga6vMh7RSQla7XTSXwzjGVkvFO6xMHpKyONWlx+YQWWAV+W2G+ejyp3fX9Li
 T5NXswVdQfi5j6owS3C33M+KQGIily/S7Qt93ne1VU5oUBTcDNd0zb9Pei4cLSgt
 /RD5D9VwzkBejBeC3J/8O1JG6pHGHxZS1QBnupRpC1HFIKmyiTg+RwxQl+WO+Gv2
 HbDj1InEDZdjlByvBpwUzx7rU5R8x0dzZI9J8VSBQDb9ncYTKkc8V44hC/lkevUD
 bENNrXHwbDZj5PURR4DXXbDIhD9KRw8lJZvUhGrYkmsQe4URFAcuxiU5CZD0xklz
 MQKPsRRRJwOOQLHrBVXzmvWT10evfa2xa7mJUSWFXWc485OOOL0cV+mrJsIUqN42
 9Y2jQ5jjWOX74RZoQQVyQvm+eWAg03eM+mobl3mHLVONCF8tLtw=
 =77d7
 -----END PGP SIGNATURE-----

Merge tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS fixes from James Hogan:
 "Another miscellaneous pile of MIPS fixes for 4.16:

   - lantiq: fixes for clocks and Amazon SE (4.14)

   - ralink: fix booting on MT7621 (4.5)

   - ralink: fix halt (3.9)"

* tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: ralink: Fix booting on MT7621
  MIPS: ralink: Remove ralink_halt()
  MIPS: lantiq: ase: Enable MFD_SYSCON
  MIPS: lantiq: Enable AHB Bus for USB
  MIPS: lantiq: Fix Danube USB clock
2018-03-23 11:30:52 -07:00
Linus Torvalds
095fe49fd5 VFIO fix for v4.16-rc7
- Revert masking INTx where it cannot be enabled, plays poorly with
    SR-IOV VFs and presumes DisINTx support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJatRaRAAoJECObm247sIsiudoP/iokDym50s2KJPho9q3t6pT2
 8qxcgztrigfSKH/siYbfOZhxvtprfoP1bm3+zsrQIeCjVnJCA0IiBakzHZqef24F
 ECMh5xU08inxQwBdXCCsvrzebnWDgOQJS3k0Y9gUPzFbJBxdKdZVN2NvxGllzmX6
 vfoXnuwogGNJ3hO3YwIJDuQctd9IcRZ9mojbYvTMpcw6bRh2O5IVbKsq0Pleu4F3
 JlNGNW/tWi0IE1Rixw4RJXqTrig8KhUhVmIpgd8TTHqXJehZdI171bBBZdpkPLiL
 L17yH1Jbbtpinx48qrbP1aqGe5MJsyx9SPLqrT0/uv3vi7LFdwu9yYzUOA4+koFv
 YcaXEB4iOLmEVrTVgypg72idke7n4xIlwvy/4h1ibnILkvDcp/0x+f0anqo1j7GL
 3JgMc4kqIRhQ2zTI7HrzkHo3GBZd1nPmVPSQUIZ0iCmVSqpS3ph8+3dwjVZuOqEt
 Q+mDn1GY1w1N/Znw6RMRfNCeVquClUQDSB7po0/94QbLi+FmiunvAFSAdxyMgPGu
 grpZ7j0pXSjznh7qa7tQpJBCMygUctGK4jreHdgGTmBISJRFKslfsHXbTB5nBASY
 QXH6IQq3l0dsMGATndIFz+Ci5VLWaENbM88Fb4de+g1GS3QjEulBn9n6o0YCy2MZ
 tBVL4EUlYO+tXWhrlVAy
 =+3LK
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v4.16-rc7' of git://github.com/awilliam/linux-vfio

Pull VFIO fix from Alex Williamson:
 "Revert masking INTx where it cannot be enabled - it plays poorly with
  SR-IOV VFs and presumes DisINTx support"

* tag 'vfio-v4.16-rc7' of git://github.com/awilliam/linux-vfio:
  Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"
2018-03-23 11:18:43 -07:00
Linus Torvalds
a580657ad7 * Fix several problems in the fsl_ifc NAND controller driver
* Fix misuse of mtd_ooblayout_ecc() in mtdchar.c
 -----BEGIN PGP SIGNATURE-----
 
 iQI5BAABCAAjBQJatQnqHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ
 Ze02AX4ItwBG8w/+OrE7XJmOK+I48v8cJRqdZgixOLbje2hBp/cCN300uSJzAQKS
 5LtOvZNYqlHyeCokrUKxP5l4M6PghuTAmexmzYcSFsTSGkhb2Mk5CgDODBPg9j/N
 9B+fK0+3G0LzPPYBt906B57PUrdH71eAqtafpvGZY81Mk6cBN6P8YxPhBbMwVywk
 XlgkrP/V4BhrraSfexGug8L1UndVYicxt/rG/dTQTjoQ5ccqzrlA1xD7k5gDVN0G
 lNOUx0BT29Qfd29FUtR6opr6K+cdnbnDGA53dlS+EF7+/sxanhyUnZFWOdHrFrqK
 qZ5+F/gLVEZVU3uQ5+8/o8Uth9lTq+lnobHcl6xqUTuORm8/BlPzoy7FgQR8gOCI
 7tcUwdHDNnUi3+Y3ln/plDjQWpqxxSzHdh43FPf6xR7GN/mfAfWp0KzhzLVNwRA1
 L+Wnvku2BUky9oZVcHMtQvfyZ93UsEP346QnSkpZL47MbxfGx6PkhGqUX1nl7R9i
 0sUJxXSOQnDXzWE+bdgTU7zSMOvbID+C78Q8XrJ22dbHV68PNQsZamdzgVvGLFRn
 GaZ4KaDVJ2ni8Sn/6ztEsohZPrQyYtbARorV52JUnAo/W32+vKOUFvJsknYvB63g
 DjCfgMqIfzxEuf0FyTDBBXPxpZgs93rEcP0MlKCnn3QBN4rj0IIw8I/NSEE=
 =M9Yy
 -----END PGP SIGNATURE-----

Merge tag 'mtd/fixes-for-4.16-rc7' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Boris Brezillon:

 - Fix several problems in the fsl_ifc NAND controller driver

 - Fix misuse of mtd_ooblayout_ecc() in mtdchar.c

* tag 'mtd/fixes-for-4.16-rc7' of git://git.infradead.org/linux-mtd:
  mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0
  mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0
  mtd: nand: fsl_ifc: Fix nand waitfunc return value
  mtdchar: fix usage of mtd_ooblayout_ecc()
2018-03-23 11:15:36 -07:00
Linus Torvalds
935c200aa7 Staging/IIO fixes for 4.16-rc7
Here are a few small Staging and IIO fixes for various reported issues.
 
 All of them are tiny, the majority being iio driver fixes for small
 issues, and one staging driver fix for a memory corruption issue.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWrUALw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymorwCffuZhZWs6fVk4W9L1NAOqGmNOLmwAn3cQb9XE
 FQM0o0L0QvERfvFSpdDd
 =tU/Q
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "Here are a few small staging and IIO fixes for various reported
  issues.

  All of them are tiny, the majority being iio driver fixes for small
  issues, and one staging driver fix for a memory corruption issue.

  All have been in linux-next with no reported issues"

* tag 'staging-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ncpfs: memory corruption in ncp_read_kernel()
  iio: st_pressure: st_accel: pass correct platform data to init
  Revert "iio: accel: st_accel: remove redundant pointer pdata"
  iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock()
  dt-bindings: iio: adc: sd-modulator: fix io-channel-cells
  iio: adc: stm32-dfsdm: fix multiple channel initialization
  iio: adc: stm32-dfsdm: fix clock source selection
  iio: adc: stm32-dfsdm: fix call to stop channel
  iio: adc: stm32-dfsdm: fix compatible data use
  iio: chemical: ccs811: Corrected firmware boot/application mode transition
2018-03-23 11:11:32 -07:00
Linus Torvalds
97235e74c3 Char/Misc fix for 4.16-rc7
This is a single hyperv bugfix for 4.16-rc7.
 
 It resolves an issue with the ring-buffer signaling to resolve reported
 problems.
 
 It's been in linux-next for a while now with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWrUA+Q8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylV9wCfQp5v//SugTZcAHuJIGIH1EQ5pnsAoLMWvxP3
 /9Gjr8z7wXtihDQ9+slR
 =PbHR
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull hyperv fix from Greg KH:
 "This is a single hyperv bugfix for 4.16-rc7.

  It resolves an issue with the ring-buffer signaling to resolve
  reported problems.

  It's been in linux-next for a while now with no reported issues"

* tag 'char-misc-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Drivers: hv: vmbus: Fix ring buffer signaling
2018-03-23 11:08:40 -07:00
Linus Torvalds
cde00d2169 media fixes for v4.16-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJatQDcAAoJEAhfPr2O5OEVHe8P/1Ci/5hJ0p8VfEIYXmLtyqiB
 3SnXZdvvNifAeSqXfsm7650C+Aamp4E6iNgbn6+DnQ2ZMVrq9LsIbVQHtJI76F5U
 v1949Not30aD922jCS1M1yTth/HCZapDfch+6qRCyRX9o9Nap0OlePoeUwbeI7Rb
 Mwxf8rOQbEN1Mj5Hfajh9j8O/9StJdIHk7KLebAqwoUlu/YJ0z89H540UKHbPwN+
 Z5G+xVTKUp+qztpo4Y7JVcuDL4K012gPVEzepM0aUuqLvs4drV2qJ0OeWW0dKllE
 JxEVXHIxUymKriWOq340XeJ0GiLY2UVy2iqr21Gza4hd4kIunm3g3utnGBQgjQtp
 CkgVORBGVkpu/74drecl5SqMpPKiiKelY7e2LJCb9uxEWu8h8BBPaiYOM4V3MGIU
 jNTKZgGyJPwxH3dv6vv7jJJ87HjYHHZC+/HVQSRRhyLdONzPKHRKjuZbmmXT4l7o
 RJ670mMD1m0FM5paYJ7jGZJ0jMYNh8UyehJ65lHcWsnGh7aTgQ7Rv/xnGGxiKhkl
 ByclFqLTXfsVdBsi18Jno+l7s8vhowp+DCL8aqpt44wIE4W2gkRY1bD9/MihGiZy
 ZaICuMAh/cp3QGC+cAJGY06jjXbnM6TfzQsBlTii31QqBhlezdoaeEq+7LmMjVfP
 GB1yHdlOWMLPIIcQQ4wG
 =sSiA
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "Three fixes:

   - dvb: fix a Kconfig typo on a help text

   - tegra-cec: reset rx_buf_cnt when start bit detected

   - rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature"

* tag 'media/v4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dvb: fix a Kconfig typo
  media: tegra-cec: reset rx_buf_cnt when start bit detected
  media: rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature
2018-03-23 10:59:38 -07:00