Commit graph

781,636 commits

Author SHA1 Message Date
Amit Nischal
687d7a0caa clk: qcom: Add support for controlling Fabia PLL
Fabia PLL is a Digital Frequency Locked Loop (DFLL) clock
generator which has a wide range of frequency output. It
supports dynamic updating of the output frequency
("frequency slewing") without need to turn off the PLL
before configuration. Add support for initial configuration
and programming sequence to control fabia PLLs.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
[sboyd: Shorten code a little]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 16:32:36 -07:00
Dhinakaran Pandiyan
b1e314462b drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
If bios sets up an MST output and hardware state readout code sees this is
an SST configuration, when disabling the encoder we end up calling
->post_disable_dp() hook instead of the MST version. Consequently, we write
to the DP_SET_POWER dpcd to set it D3 state. Further along when we try
enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up
the MST hub. This results in continuous link training failures which keep
the system busy delaying boot. We could identify bios MST boot discrepancy
and handle it accordingly but a simple way to solve this is to write to the
DP_SET_POWER dpcd for MST too.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5ea2355a10 ("drm/i915/mst: Use MST sideband message transactions for dpms control")
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit ad260ab32a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-19 16:21:52 -07:00
Alexandre Belloni
f6b1a3a4a7 parisc: time: stop validating rtc_time in .read_time
The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it just before returning from the callback.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-20 00:02:09 +01:00
Amit Nischal
bdc3bbdd40 clk: qcom: Clear hardware clock control bit of RCG
For upcoming targets like sdm845, POR value of the hardware clock control
bit is set for most of root clocks which needs to be cleared for software
to be able to control. For older targets like MSM8996, this bit is reserved
bit and having POR value as 0 so this patch will work for the older targets
too. So update the configuration mask to take care of the same to clear
hardware clock control bit.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 15:55:38 -07:00
Linus Torvalds
1b5f3ba415 Merge branch 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
 "Two commits to fix the following subtle cgroup2 behavior bugs:

   - cpu.max was rejecting config when it shouldn't

   - thread mode enable was allowed when it shouldn't"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix rule checking for threaded mode switching
  sched, cgroup: Don't reject lower cpu.max on ancestors
2018-03-19 15:39:02 -07:00
Takashi Iwai
b1abf6fc49 ACPI / watchdog: Fix off-by-one error at resource assignment
The resource allocation in WDAT watchdog has off-one-by error, it sets
one byte more than the actual end address.  This may eventually lead
to unexpected resource conflicts.

Fixes: 058dfc7670 (ACPI / watchdog: Add support for WDAT hardware watchdog)
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-19 23:17:07 +01:00
Linus Torvalds
c6256ca9c0 Merge branch 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
 "Two low-impact workqueue commits.

  One fixes workqueue creation error path and the other removes the
  unused cancel_work()"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove unused cancel_work()
  workqueue: use put_device() instead of kfree()
2018-03-19 15:13:04 -07:00
Linus Torvalds
0d707a2f24 Merge branch 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu fixes from Tejun Heo:
 "Late percpu pull request for v4.16-rc6.

   - percpu allocator pool replenishing no longer triggers OOM or
     warning messages.

     Also, the alloc interface now understands __GFP_NORETRY and
     __GFP_NOWARN. This is to allow avoiding OOMs from userland
     triggered actions like bpf map creation.

     Also added cond_resched() in alloc loop.

   - perpcu allocation now can be interrupted by kill sigs to avoid
     deadlocking OOM killer.

   - Added Dennis Zhou as a co-maintainer.

     He has rewritten the area map allocator, understands most of the
     code base and has been responsive for all bug reports"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu_ref: Update doc to dissuade users from depending on internal RCU grace periods
  mm: Allow to kill tasks doing pcpu_alloc() and waiting for pcpu_balance_workfn()
  percpu: include linux/sched.h for cond_resched()
  percpu: add a schedule point in pcpu_balance_workfn()
  percpu: allow select gfp to be passed to underlying allocators
  percpu: add __GFP_NORETRY semantics to the percpu balancing path
  percpu: match chunk allocator declarations with definitions
  percpu: add Dennis Zhou as a percpu co-maintainer
2018-03-19 14:48:35 -07:00
Srinivas Kandagatla
8bcde6582c clk: qcom: rpmcc: Add support to XO buffered clocks
XO is onchip buffer clock to generate 19.2MHz.

This patch adds support to 5 XO buffer clocks found on PMIC8921,
these buffer clocks can be controlled from external pin or in
manual mode.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 14:40:26 -07:00
Weiyi Lu
f72595cf44 clk: mediatek: update clock driver of MT2712
According to ECO design change,
1. add new clock mux data and change some
2. add new clock gate data and clock factor data
3. change status register offset of infra subsystem

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 14:37:40 -07:00
Weiyi Lu
8465baaeca dt-bindings: clock: add clocks for MT2712
add new clocks according to ECO design change

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 14:37:31 -07:00
Jeffy Chen
cef7b18c3e clk: lpc32xx: Set name of regmap_config
We are now allowing to register debugfs without a valid device, and not
having a valid name will end up using "dummy*" to create debugfs dir.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 14:35:16 -07:00
Linus Torvalds
efac2483e8 Merge branch 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "I sat on them too long and it's quite a few this late, but nothing has
  a wide blast area. The changes are...

   - Fix corner cases in SG command handling.

   - Recent introduction of default powersaving mode config option
     exposed several devices with broken powersaving behaviors. A number
     of patches to update the blacklist accordingly.

   - Fix a kernel panic on SAS hotplug.

   - Other misc and device specific updates"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
  libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
  libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
  libata: Enable queued TRIM for Samsung SSD 860
  PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
  ahci: Add PCI-id for the Highpoint Rocketraid 644L card
  ata: do not schedule hot plug if it is a sas host
  libata: disable LPM for Crucial BX100 SSD 500GB drive
  libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
  libata: update documentation for sysfs interfaces
  ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
  libata: transport: cleanup documentation of sysfs interface
  sata_rcar: Reset SATA PHY when Salvator-X board resumes
  libata: don't try to pass through NCQ commands to non-NCQ devices
  libata: remove WARN() for DMA or PIO command without data
  libata: fix length validation of ATAPI-relayed SCSI commands
  ata: libahci: fix comment indentation
  ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
  libata: Fix compile warning with ATA_DEBUG enabled
2018-03-19 14:23:30 -07:00
Chen-Yu Tsai
dbb6d86415
ARM: dts: sun9i: cubieboard4: Enable VGA display output
The Cubieboard4 has a dumb VGA DAC connected to the output of LCD0,
providing VGA output through the onboard VGA connector. The DDC lines
are connected to i2c3.

The VGA DAC is a GM7123, which is compatible with Analog Devices'
ADV7123, except it only takes 3.3V power, and has a lower standby power
consumption. The datasheet found online lists "Chengdu GoldTel Electronical
Technology Co., Ltd." as its designer. The company changed its name in
2014 to "Chengdu Corpro Technology Co., Ltd.". Their website lists similar
ICs, but not actually the GM7123.

Enable the display pipeline with the VGA DAC and connector, and i2c3
for DDC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:13:05 +01:00
Chen-Yu Tsai
0210470482
ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output.
The A80 supports RGB888 with H/V sync from LCD0. Add a pinmux setting
for the needed pins.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:13:01 +01:00
Chen-Yu Tsai
f1317774c6
ARM: dts: sun9i: Add device nodes for documented display pipelines for A80
The Allwinner A80 SoC has 3 display pipelines, of which some parts are
documented:

  - 3x display front ends (FE), documented
  - 2x display enhancement units (DEU), undocumented
  - 3x display back ends (BE), documented
  - 2x dynamic range controller (DRC), undocumented
  - 2x LCDC/TCONs, documented
  - 1x LCDC/TCON, undocumented, and probably not useable
  - 1x HDMI transmitter, undocumented but DesignWare compatible
  - 1x MERGE block, function unknown

This patch adds device nodes for the first 2 documented pipelines:

    FE0 - DEU0 - - BE0 - DRC0 - TCON0
		x
    FE1 - DEU1 - - BE1 - DRC1 - TCON1

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:12:58 +01:00
Harald Geyer
c916eb95bc
arm64: dts: allwinner: a64: Add support for TERES-I laptop
The TERES-I is an open hardware laptop built by Olimex using the
Allwinner A64 SoC.

Add the board specific .dts file, which includes the A64 .dtsi and
enables the peripherals that we support so far.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:12:31 +01:00
Harald Geyer
c1cff65f9b
arm64: dts: allwinner: a64: add simplefb for A64 SoC
The A64 SoC features two display pipelines, one has a LCD output, the
other has a HDMI output.

Add support for simplefb for the LCD output. Tested on Teres I.

This patch was inspired by work of Icenowy Zheng.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:12:28 +01:00
Harald Geyer
d41850437c
arm64: dts: allwinner: a64: Add watchdog
Add a watchdog node for the A64, automatically enabled on all boards.
Since the device is compatible with an existing driver, we only reserve
a new compatible string to be used together with the fall back.
Tested on Olimex Teres-I.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:12:26 +01:00
Harald Geyer
11239fe6a0
arm64: dts: allwinner: a64: Add i2c0 pins
Add the proper pin group node to reference in board files.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:12:25 +01:00
Icenowy Zheng
494d836762
arm64: allwinner: h6: add support for Pine H64 board
Pine H64 is an Allwinner H6-based SBC from Pine64, with the following
features:

- 1GiB/2GiB/4GiB LPDDR3 DRAM (in 4GiB situation only 3GiB is
accessible)
- AXP805 PMIC
- Raspberry-Pi-compatible GPIO header, "Euler" GPIO header (not
compatible with the "Euler" on Pine A64) and "Expansion" pin header
- 2 USB 2.0 ports and 1 USB 3.0 ports
- Audio jack
- MicroSD slot and eMMC module slot
- on-board SPI NOR flash
- 1Gbps Ethernet port (via RTL8211E PHY)
- HDMI port

Adds initial support for it, including the UART on the Expansion pin
header.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:12:23 +01:00
Icenowy Zheng
e54be32d02
arm64: allwinner: h6: add the basical Allwinner H6 DTSI file
Allwinner H6 is a new SoC with Cortex-A53 cores from Allwinner, with its
memory map fully reworked and some high-speed peripherals (PCIe, USB
3.0) introduced.

This commit adds the basical DTSI file of it, including the clock
support and UART support.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 22:12:21 +01:00
Maxime Ripard
ddc389f5a4
drm/sun4i: backend: Support YUV planes
Now that we have the guarantee that we will have only a single YUV plane,
actually support them. The way it works is not really straightforward,
since we first need to enable the YUV mode in the plane that we want to
setup, and then we have a few registers to setup the YUV buffer and
parameters.

We also need to setup the color correction to actually have something
displayed.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/66088c1398bd3189123f28a89a7ccc669fe9f296.1519931807.git-series.maxime.ripard@bootlin.com
2018-03-19 22:04:57 +01:00
Shawn Lin
1f9c63e8de clk: Don't show the incorrect clock phase
It's found that the clock phase output from clk_summary is
wrong compared to the actual phase reading from the register.

cat /sys/kernel/debug/clk/clk_summary | grep sdio_sample
sdio_sample     0        1        0 50000000          0 -22

It exposes an issue that clk core, clk_core_get_phase, always
returns the cached core->phase which should be either updated
by calling clk_set_phase or directly from the first place the
clk was registered.

When registering the clk, the core->phase geting from ->get_phase()
may return negative value indicating error. This is quite common
since the clk's phase may be highly related to its parent chain,
but it was temporarily orphan when registered, since its parent
chains hadn't be ready at that time, so the clk drivers decide to
return error in this case. However, if no clk_set_phase is called or
maybe the ->set_phase() isn't even implemented, the core->phase would
never be updated. This is wrong, and we should try to update it when
all its parent chains are settled down, like the way of updating clock
rate for that. But it's not deserved to complicate the code now and
just update it anyway when calling clk_core_get_phase, which would be
much simple and enough.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 14:02:49 -07:00
Richard Genoud
6a4a459580 clk: mvebu: armada-38x: add support for missing clocks
Clearfog boards can come with a CPU clocked at 1600MHz (commercial)
or 1333MHz (industrial).

They have also some dip-switches to select a different clock (666, 800,
1066, 1200).

The funny thing is that the recovery button is on the MPP34 fq selector.
So, when booting an industrial board with this button down, the frequency
666MHz is selected (and the kernel didn't boot).

This patch add all the missing clocks.

The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ).

Fixes: 0e85aeced4 ("clk: mvebu: add clock support for Armada 380/385")
Cc: <stable@vger.kernel.org> # 3.16.x: 9593f4f56c: clk: mvebu: armada-38x: add support for 1866MHz variants
Cc: <stable@vger.kernel.org> # 3.16.x

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:53:57 -07:00
Mike Looijmans
2e838e7f3a clk: clk-gpio: Allow GPIO to sleep in set/get_parent
When changing or retrieving clock parents, the caller is in a sleepable
state (like prepare) so the GPIO operation need not be atomic. Replace
gpiod_{g|s}et_value with gpiod_{g|s}et_value_cansleep in the {g|s}et_parent
calls for the GPIO based clock mux.

This fixes a "slowpath" warning when the GPIO controller is an I2C expander
or something similar.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:53:08 -07:00
Riku Voipio
3a49afb84c clk: enable hi655x common clk automatically
Without COMMON_CLK_HI655X Wifi and bluetooth are non-functional on Hikey.
As suggested by Arnd, enable the driver automatically when the parent
driver is selected. With sensible defaults in place, we can leave other
choices for EXPERT.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Arnd Bergmann <arnd@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:52:20 -07:00
Benjamin Gaignard
da32d3539f clk: stm32: add configuration flags for each of the stm32 drivers
Add two configuration flags to be able to not compile all the time
stm32f and stm32h7 drivers when ARCH_STM32 is set.
That help to save some space on those small platforms.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:49:36 -07:00
Patrice Chotard
f9acf1057d clk: stm32: Add clk entry for SDMMC2 on stm32F769
STM32F769 has 2 SDMMC port, add clock entry for the second one.

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:46:07 -07:00
Matan Barak
185899ee8d IB/uverbs: Enable ioctl() uAPI by default for new verbs
Enable the ioctl() uAPI for IB by default if the standard write()
uAPI (INFINIBAND_USER_ACCESS) is enabled. Verbs that are
also available under the old write() uAPI are put inside a new
INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI Kconfig.

Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 14:45:17 -06:00
Matan Barak
3d64addd43 IB/uverbs: Add macros to simplify adding driver specific attributes
Previously, adding driver specific attributes required drivers to
declare all the hierarchy - object tree, object, methods and the
attributes themselves. A common use case is adding a few attributes to
an existing common method.
In order to simplify the driver's code, we add some macros to do all
these declarations automatically.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 14:45:17 -06:00
Matan Barak
41b2a71fc8 IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file
Currently, all objects are declared in uverbs_std_types. This could lead
to a huge file once we implement all objects, methods and handlers.
Moving each object to its own file to keep the files smaller and more
readable. uverbs_std_types.c will only contain the parsing tree
definition and objects without any methods.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 14:45:17 -06:00
Matan Barak
dfb1395573 IB/uverbs: Expose parsing tree of all common objects to providers
The ioctl() based uverbs is based on merging feature trees. This teaches
the generic parser how to parse methods according to the provider's
support. In order to support merging with the common objects, exporting
the common-object-tree to the provider drivers.

Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 14:45:17 -06:00
Matan Barak
c66db31113 IB/uverbs: Safely extend existing attributes
Previously, we've used UVERBS_ATTR_SPEC_F_MIN_SZ for extending existing
attributes. The behavior of this flag was the kernel accepts anything
bigger than the minimum size it specified. This is unsafe, since in
order to safely extend an attribute, we need to make sure unknown size
is zeroed. Replacing UVERBS_ATTR_SPEC_F_MIN_SZ with
UVERBS_ATTR_SPEC_F_MIN_SZ_OR_ZERO, which essentially checks that the
unknown size is zero. In addition, attributes are now decorated with
UVERBS_ATTR_TYPE and UVERBS_ATTR_STRUCT, so we can provide the minimum
and known length.

Users of this flag needs to use copy_from_or_zero functions/macros.

Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 14:45:17 -06:00
Matan Barak
1f07e08fab IB/uverbs: Enable compact representation of uverbs_attr_spec
Downstream patches extend uverbs_attr_spec with new fields.
In order to save space, we move the type and flags fields to
the various attribute flavors contained in the union.

Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 14:45:17 -06:00
Matan Barak
0ede73bc01 IB/uverbs: Extend uverbs_ioctl header with driver_id
Extending uverbs_ioctl header with driver_id and another reserved
field. driver_id should be used in order to identify the driver.
Since every driver could have its own parsing tree, this is necessary
for strace support.
Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB
support and thus we add some reserved fields for future usage.

Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 14:45:17 -06:00
Matan Barak
1f7ff9d5d3 IB/uverbs: Move to new headers and make naming consistent
Use macros to make names consistent in ioctl() uAPI:
The ioctl() uAPI works with object-method hierarchy. The method part
also states which handler should be executed when this method is called
from user-space. Therefore, we need to tie method, method's id, method's
handler and the object owning this method together.
Previously, this was done through explicit developer chosen names.
This makes grepping the code harder. Changing the method's name,
method's handler and object's name to be automatically generated based
on the ids.

The headers are split in a way so they be included and used by
user-space. One header strictly contains structures that are used
directly by user-space applications, where another header is used for
internal library (i.e. libibverbs) to form the ioctl() commands.
Other header simply contains the required general command structure.

Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19 14:45:17 -06:00
Gabriel Fernandez
2f05b6b920 clk: stm32: Add DSI clock for STM32F469 Board
This patch adds DSI clock for STM32F469 board

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:45:11 -07:00
Gabriel Fernandez
fa6f398505 clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK
Update of END_PRIMARY_CLK was missed, it should be after CLK_SYSCLK
hsi and sysclk are overwritten by gpioa and gpiob.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:44:53 -07:00
Katsuhiro Suzuki
afeb079bc8 clk: uniphier: add Pro4/Pro5/PXs2 audio system clock
Add clock for audio subsystem (AIO) on UniPhier
Pro4/Pro5/PXs2 SoCs.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:42:49 -07:00
Ryder Lee
9cb12501f3 dt-bindings: clock: mediatek: add audsys support for MT2701
This patch adds a compatible string for MT2701.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:41:39 -07:00
Ryder Lee
2817a92dd9 dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device
The MediaTek audio hardware block that exposes functionalities that are
handled by separate subsystems in the kernel.  These functions are all
mapped somewhere at 0x112xxxxx, and there are some control bits are mixed
up with other functions within the same registers.

This patch modifies example to illustrate child nodes.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:41:28 -07:00
Ryder Lee
936ceb12c5 clk: mediatek: update missing clock data for MT7622 audsys
Add missing clock data 'CLK_AUDIO_AFE_CONN' for MT7622 audsys.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:40:57 -07:00
Jeff Layton
9258a2d5cd nfsd: move nfs4_client allocation to dedicated slabcache
On x86_64, it's 1152 bytes, so we can avoid wasting 896 bytes each.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19 16:38:13 -04:00
J. Bruce Fields
9d7ed1355d nfsd: don't require low ports for gss requests
In a traditional NFS deployment using auth_unix, the clients are trusted
to correctly report the credentials of their logged-in users.  The
server assumes that only root on client machines is allowed to send
requests from low-numbered ports, so it can use the originating port
number to distinguish "real" NFS clients from NFS clients run by
ordinary users, to prevent ordinary users from spoofing credentials.

The originating port number on a gss-authenticated request is less
important.  The authentication ties the request to a user, and we take
it as proof that that user authorized the request.  The low port number
check no longer adds much.

So, don't enforce low port numbers in the auth_gss case.

Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19 16:38:13 -04:00
J. Bruce Fields
edcc8452a0 nfsd: remove unsused "cp_consecutive" field
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19 16:38:13 -04:00
Colin Ian King
554faf2819 lockd: make nlm_ntf_refcnt and nlm_ntf_wq static
The variables nlm_ntf_refcnt and nlm_ntf_wq are local to the source and
do not need to be in global scope, so make them static.

Cleans up sparse warnings:
fs/lockd/svc.c:60:10: warning: symbol 'nlm_ntf_refcnt' was not declared.
Should it be static?
fs/lockd/svc.c:61:1: warning: symbol 'nlm_ntf_wq' was not declared.
Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19 16:38:13 -04:00
Jeff Layton
bd2decac5e nfsd4: send the special close_stateid in v4.0 replies as well
We already send it for v4.1, but RFC7530 also notes that the stateid in
the close reply is bogus.

Always send the special close stateid, even in v4.0 responses. No client
should put any meaning on it whatsoever. For now, we continue to
increment the stateid value, though that might not be necessary either.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19 16:38:12 -04:00
NeilBrown
3b68e6ee3c SUNRPC: cache: ignore timestamp written to 'flush' file.
The interface for flushing the sunrpc auth cache was poorly
designed and has caused problems a number of times.

The design is that you write a timestamp, and all entries
created before that time are discarded.
The most obvious problem is that this is not what people
actually want.  They want to just flush the whole cache.
The 1-second granularity can be a problem, as can the use
of wall-clock time.

A current problem is that code will write the current time to
this file - expecting it to clear everything - and if the
seconds number ticks over before this timestamp is checked,
the test "then >= now" fails, and a full flush isn't forced.

So lets just drop the subtleties and always flush the whole
cache.  The worst this could do is impose an extra cost
refilling it, but that would require someone to be using
non-standard tools.

We still report an error if the string written is not a number,
but we cause any valid number to flush the whole cache.

Reported-by: "Wang, Alan 1. (NSB - CN/Hangzhou)" <alan.1.wang@nokia-sbell.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19 16:38:12 -04:00
James Ettle
90a9b1473d sunrpc: Fix unaligned access on sparc64
Fix unaligned access in gss_{get,verify}_mic_v2() on sparc64

Signed-off-by: James Ettle <james@ettle.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19 16:38:12 -04:00