There is a page_pool_put() function but no get equivalent.
Having multiple references to a page pool is quite useful.
It avoids branching in create / destroy paths in drivers
which support memory providers.
Use the new helper in bnxt.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250820025704.166248-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The LAN8842 is a low-power, single port triple-speed (10BASE-T/ 100BASE-TX/
1000BASE-T) ethernet physical layer transceiver (PHY) that supports
transmission and reception of data on standard CAT-5, as well as CAT-5e and
CAT-6, Unshielded Twisted Pair (UTP) cables.
The LAN8842 supports industry-standard SGMII (Serial Gigabit Media
Independent Interface) providing chip-to-chip connection to a Gigabit
Ethernet MAC using a single serialized link (differential pair) in each
direction.
There are 2 variants of the lan8842. The one that supports timestamping
(lan8842) and one that doesn't have timestamping (lan8832).
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250818075121.1298170-5-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A preparation patchset for adjacent function vports.
Adjacent functions can delegate their SR-IOV VFs to sibling PFs,
allowing for more flexible and scalable management in multi-host and
ECPF-to-host scenarios. Adjacent vports can be managed by the management
PF via their unique vhca id and can't be managed by function index as the
index can conflict with the local vports/vfs.
This series provides:
- Use the cached vcha id instead of querying it every time from fw
- Query hca cap using vhca id instead of function id when FW supports it
- Add HW capabilities and required definitions for adjacent function vports
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmifjKUACgkQSD+KveBX
+j530Af/Zx0bWPBKGNkO64Qo5CGXS4ShX4BXZOwN6lso2a6xAiVpHExlClFszEzu
WgA27Y1E/a1VYnsb15fWKc/XCwtjglAE8zpobP3/MzvIbh3diIJj2uc5iOoqGiJh
pxA4hN/xuWjQ2ZjklSv5yAx/grZdqzip4epUdIXfzJyWhS+8TMTwEnujhRC2hCVO
ffwdi0r04HEgtLs61O7Gdvy5Q4JrZuT/Gsb4EPtQaq4A0rxkhh/lagtcA2D3C/11
JOIhvHssmzs3+XHZ+fvlI8n5hwrsuf+abDJSGPLF3Mp6Qg3s0DR7cC8De5FFdIuS
T8+h/I5zHRiC+XJdz8FeoJ5DAcei9A==
=KDK0
-----END PGP SIGNATURE-----
Merge tag 'mlx5-next-vhca-id' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next-vhca-id
A preparation patchset for adjacent function vports.
Adjacent functions can delegate their SR-IOV VFs to sibling PFs,
allowing for more flexible and scalable management in multi-host and
ECPF-to-host scenarios. Adjacent vports can be managed by the management
PF via their unique vhca id and can't be managed by function index as the
index can conflict with the local vports/vfs.
This series provides:
- Use the cached vcha id instead of querying it every time from fw
- Query hca cap using vhca id instead of function id when FW supports it
- Add HW capabilities and required definitions for adjacent function vports
* tag 'mlx5-next-vhca-id' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
{rdma,net}/mlx5: export mlx5_vport_get_vhca_id
net/mlx5: E-Switch, Set/Query hca cap via vhca id
net/mlx5: E-Switch, Cache vport vhca id on first cap query
net/mlx5: mlx5_ifc, Add hardware definitions needed for adjacent vports
====================
Link: https://patch.msgid.link/20250815194901.298689-1-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert SCTP cookies to use HMAC-SHA256, instead of the previous choice
of the legacy algorithms HMAC-MD5 and HMAC-SHA1. Simplify and optimize
the code by using the HMAC-SHA256 library instead of crypto_shash, and
by preparing the HMAC key when it is generated instead of per-operation.
This doesn't break compatibility, since the cookie format is an
implementation detail, not part of the SCTP protocol itself.
Note that the cookie size doesn't change either. The HMAC field was
already 32 bytes, even though previously at most 20 bytes were actually
compared. 32 bytes exactly fits an untruncated HMAC-SHA256 value. So,
although we could safely truncate the MAC to something slightly shorter,
for now just keep the cookie size the same.
I also considered SipHash, but that would generate only 8-byte MACs. An
8-byte MAC *might* suffice here. However, there's quite a lot of
information in the SCTP cookies: more than in TCP SYN cookies. So
absent an analysis that occasional forgeries of all that information is
okay in SCTP, I errored on the side of caution.
Remove HMAC-MD5 and HMAC-SHA1 as options, since the new HMAC-SHA256
option is just better. It's faster as well as more secure. For
example, benchmarking on x86_64, cookie authentication is now nearly 3x
as fast as the previous default choice and implementation of HMAC-MD5.
Also just make the kernel always support cookie authentication if SCTP
is supported at all, rather than making it optional in the build. (It
was sort of optional before, but it didn't really work properly. E.g.,
a kernel with CONFIG_SCTP_COOKIE_HMAC_MD5=n still supported HMAC-MD5
cookie authentication if CONFIG_CRYPTO_HMAC and CONFIG_CRYPTO_MD5
happened to be enabled in the kconfig for other reasons.)
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250818205426.30222-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For SCTP chunk authentication, use the HMAC-SHA1 and HMAC-SHA256 library
functions instead of crypto_shash. This is simpler and faster. There's
no longer any need to pre-allocate 'crypto_shash' objects; the SCTP code
now simply calls into the HMAC code directly.
As part of this, make SCTP always support both HMAC-SHA1 and
HMAC-SHA256. Previously, it only guaranteed support for HMAC-SHA1.
However, HMAC-SHA256 tended to be supported too anyway, as it was
supported if CONFIG_CRYPTO_SHA256 was enabled elsewhere in the kconfig.
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250818205426.30222-4-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Except for sk_clone_lock(), all accesses to sk->sk_memcg
is done under CONFIG_MEMCG.
As a bonus, let's define sk->sk_memcg under CONFIG_MEMCG.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will store a flag in the lowest bit of sk->sk_memcg.
Then, we cannot pass the raw pointer to mem_cgroup_under_socket_pressure().
Let's pass struct sock to it and rename the function to match other
functions starting with mem_cgroup_sk_.
Note that the helper is moved to sock.h to use mem_cgroup_from_sk().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will store a flag in the lowest bit of sk->sk_memcg.
Then, we cannot pass the raw pointer to mem_cgroup_charge_skmem()
and mem_cgroup_uncharge_skmem().
Let's pass struct sock to the functions.
While at it, they are renamed to match other functions starting
with mem_cgroup_sk_.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The socket memcg feature is enabled by a static key and
only works for non-root cgroup.
We check both conditions in many places.
Let's factorise it as a helper function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will store a flag in the lowest bit of sk->sk_memcg.
Then, directly dereferencing sk->sk_memcg will be illegal, and we
do not want to allow touching the raw sk->sk_memcg in many places.
Let's introduce mem_cgroup_from_sk().
Other places accessing the raw sk->sk_memcg will be converted later.
Note that we cannot define the helper as an inline function in
memcontrol.h as we cannot access any fields of struct sock there
due to circular dependency, so it is placed in sock.h.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sk_alloc() allocates a socket, mem_cgroup_sk_alloc() sets
sk->sk_memcg based on the current task.
MPTCP subflow socket creation is triggered from userspace or
an in-kernel worker.
In the latter case, sk->sk_memcg is not what we want. So, we fix
it up from the parent socket's sk->sk_memcg in mptcp_attach_cgroup().
Although the code is placed under #ifdef CONFIG_MEMCG, it is buried
under #ifdef CONFIG_SOCK_CGROUP_DATA.
The two configs are orthogonal. If CONFIG_MEMCG is enabled without
CONFIG_SOCK_CGROUP_DATA, the subflow's memory usage is not charged
correctly.
Let's move the code out of the wrong ifdef guard.
Note that sk->sk_memcg is freed in sk_prot_free() and the parent
sk holds the refcnt of memcg->css here, so we don't need to use
css_tryget().
Fixes: 3764b0c565 ("mptcp: attach subflow socket to parent cgroup")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Going forward skb_dst_set will assert that skb dst_entry
is empty during skb_dst_set to prevent potential leaks. There
are few places that still manually manage dst_entry not using
the helpers. Convert them to the following new helpers:
- skb_dstref_steal that resets dst_entry and returns previous dst_entry
value
- skb_dstref_restore that restores dst_entry previously reset via
skb_dstref_steal
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250818154032.3173645-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances RX buffer handling in the mana driver by allocating
pages from a page pool and slicing them into MTU-sized fragments, rather
than dedicating a full page per packet. This approach is especially
beneficial on systems with large base page sizes like 64KB.
Key improvements:
- Proper integration of page pool for RX buffer allocations.
- MTU-sized buffer slicing to improve memory utilization.
- Reduce overall per Rx queue memory footprint.
- Automatic fallback to full-page buffers when:
* Jumbo frames are enabled (MTU > PAGE_SIZE / 2).
* The XDP path is active, to avoid complexities with fragment reuse.
Testing on VMs with 64KB pages shows around 200% throughput improvement.
Memory efficiency is significantly improved due to reduced wastage in page
allocations. Example: We are now able to fit 35 rx buffers in a single 64kb
page for MTU size of 1500, instead of 1 rx buffer per page previously.
Tested:
- iperf3, iperf2, and nttcp benchmarks.
- Jumbo frames with MTU 9000.
- Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for
testing the XDP path in driver.
- Memory leak detection (kmemleak).
- Driver load/unload, reboot, and stress scenarios.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
ice: implement SRIOV VF Active-Active LAG
Dave Ertman says:
Implement support for SRIOV VFs over an Active-Active link aggregate.
The same restrictions apply as are in place for the support of
Active-Backup bonds.
- the two interfaces must be on the same NIC
- the FW LLDP engine needs to be disabled
- the DDP package that supports VF LAG must be loaded on device
- the two interfaces must have the same QoS config
- only the first interface added to the bond will have VF support
- the interface with VFs must be in switchdev mode
With the additional requirement of
- the version of the FW on the NIC needs to have VF Active/Active support
The balancing of traffic between the two interfaces is done on a queue
basis. Taking the queues allocated to all of the VFs as a whole, one
half of them will be distributed to each interface. When a link goes
down, then the queues allocated to the down interface will migrate to
the active port. When the down port comes back up, then the same
queues as were originally assigned there will be moved back.
Patch 1 cleans up void pointer casts
Patch 2 utilizes bool over u8 when appropriate
Patch 3 adds a driver prefix to a LAG define
Patch 4 pre-move a function to reduce delta in implementation patch
Patch 5 cleanup variable initialization in declaration block
Patch 6 cleanup capability parsing for LAG feature
Patch 7 is the implementation of the new functionality
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Implement support for SRIOV VFs across Active/Active bonds
ice: cleanup capabilities evaluation
ice: Cleanup variable initialization in LAG code
ice: move LAG function in code to prepare for Active-Active
ice: Add driver specific prefix to LAG defines
ice: replace u8 elements with bool where appropriate
ice: Remove casts on void pointers in LAG code
====================
Link: https://patch.msgid.link/20250814230855.128068-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vhca id is already cached in the vport structure no need to query on
every mlx5 layer, use the mlx5_vport_get_vhca_id, where possible.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Next patches will implement the discovery and creation of adjacent
functions vports, this patch introduces the hardware structures
definitions needed for the driver implementation.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jack Morgenstein <jackm@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Constify the devlink port attributes to indicate they are read only
and does not depend on anything else. Therefore, validate it early
before setting in the devlink port.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20250813094417.7269-3-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements the software flows to handle SRIOV VF
communication across an Active/Active link aggregate. The same
restrictions apply as are in place for the support of Active/Backup
bonds.
- the two interfaces must be on the same NIC
- the FW LLDP engine needs to be disabled
- the DDP package that supports VF LAG must be loaded on device
- the two interfaces must have the same QoS config
- only the first interface added to the bond will have VF support
- the interface with VFs must be in switchdev mode
With the additional requirement of
- the version of the FW on the NIC needs to have VF Active/Active support
This requirement is indicated in the capabilities struct associated
with the NVM loaded on the NIC.
The balancing of traffic between the two interfaces is done on a queue
basis. Taking the queues allocated to all of the VFs as a whole, one
half of them will be distributed to each interface. When a link goes
down, then the queues allocated to the down interface will migrate to
the active port. When the down port comes back up, then the same
queues as were originally assigned there will be moved back.
Co-developed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Cross-merge networking fixes after downstream PR (net-6.17-rc2).
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
d7a276a576 ("net: stmmac: rk: convert to suspend()/resume() methods")
de1e963ad0 ("net: stmmac: rk: put the PHY clock on remove")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When evaluating the capabilities field, the ICE_AQC_BIT_ROCEV2_LAG and
ICE_AQC_BIT_SRIOV_LAG defines were both not using the BIT operator,
instead simply setting a hex value that set the correct bits. While
not inaccurate, this method is misleading, and when it is expanded in
the following implementation it becomes even more confusing.
Switch to using the BIT() operator to clarify what is being checked.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth: bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- eth: hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth: hibmcge: fix the division by zero issue
- eth: microchip: fix KSZ8863 reset problem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ydk1
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
Some modern NICs support including the IPv6 Flow Label in
the flow hash for RSS queue selection. This is outside
the old "Microsoft spec", but was included in the OCP NIC spec:
[ ] RSS include flow label in the hash (configurable)
https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling
RSS Flow Label hashing allows TCP Protective Load Balancing (PLB)
to recover from receiver congestion / overload.
Rx CPU/queue hotspots are relatively common for data ingest
workloads, and so far we had to try to detect the condition
at the RPC layer and reopen the connection. PLB lets us change
the Flow Label and therefore Rx CPU on RTO, with minimal packet
reordering. PLB reaction times are much faster, and can happen
at any point in the connection, not just at RPC boundaries.
Due to the nature of host processing (relatively long queues,
other kernel subsystems masking IRQs for 100s of msecs)
the risk of reordering within the host is higher than in
the network. But for applications which need it - it is far
preferable to potentially persistent overload of subset of
queues.
It is expected that the hash communicated to the host
may change if the Flow Label changes. This may be surprising
to some host software, but I don't expect the devices
can compute two Toeplitz hashes, one with the Flow Label
for queue selection and one without for the rx hash
communicated to the host. Besides, changing the hash
may potentially help to change the path thru host queues.
User can disable NETIF_F_RXHASH if they require a stable
flow hash.
The name RXH_IP6_FL was chosen based on what we call
Flow Label variables in IPv6 processing (fl). I prefer
fl_lbl but that appears to be an fbnic-only spelling.
We could spell out RXH_IP6_FLOW_LABEL but existing
RXH_ defines are a lot more terse.
Willem notes [1] that Flow Label is defined as identifying the flow
and therefore including both the flow label _and_ the L4 header
fields is not generally necessary. But it should not hurt so
it's not explicitly prevented if the driver supports hashing
on both at the same time.
Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
ixgbe: bypass devlink phys_port_name generation
Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
====================
Link: https://patch.msgid.link/20250812205226.1984369-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the second WDMA RX ring in WED driver for MT7988 SoC since the
Mediatek MT7992 WiFi chipset supports two separated WDMA rings.
Add missing MT7988 configurations to properly support WED for MT7992 in
MT76 driver.
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250812-mt7992-wed-support-v3-1-9ada78a819a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to use netdev_err() to print message in the callback function of
fix_soc_reset(), change fix_soc_reset() to have "struct stmmac_priv *" as
its first parameter.
This is preparation for later patch, no functionality change.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://patch.msgid.link/20250811073506.27513-3-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a8919758 ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add suspend/resume platform operations, which, when populated, override
the init/exit platform operations when we suspend and resume. These
suspend()/resume() methods are called by core code, and thus are
designed to support any struct device, not just platform devices. This
allows them to be used by the PCI drivers we have.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1ulXbX-008gqZ-Bb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently when adding devlink port, phys_port_name is automatically
generated within devlink port initialization flow. As a result adding
devlink port support to driver may result in forced changes of interface
names, which breaks already existing network configs.
This is an expected behavior but in some scenarios it would not be
preferable to provide such limitation for legacy driver not being able to
keep 'pre-devlink' interface name.
Add flag no_phys_port_name to devlink_port_attrs struct which indicates
if devlink should not alter name of interface.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/all/nbwrfnjhvrcduqzjl4a2jafnvvud6qsbxlvxaxilnryglf4j7r@btuqrimnfuly/
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We have to make sure that all future NAPIs will have the right threaded
state when the state is configured on the device level.
We chose not to have an "unset" state for threaded, and not to wipe
the NAPI config clean when channels are explicitly disabled.
This means the persistent config structs "exist" even when their NAPIs
are not instantiated.
Differently put - the NAPI persistent state lives in the net_device
(ncfg == struct napi_config):
,--- [napi 0] - [napi 1]
[dev] | |
`--- [ncfg 0] - [ncfg 1]
so say we a device with 2 queues but only 1 enabled:
,--- [napi 0]
[dev] |
`--- [ncfg 0] - [ncfg 1]
now we set the device to threaded=1:
,---------- [napi 0 (thr:1)]
[dev(thr:1)] |
`---------- [ncfg 0 (thr:1)] - [ncfg 1 (thr:?)]
Since [ncfg 1] was not attached to a NAPI during configuration we
skipped it. If we create a NAPI for it later it will have the old
setting (presumably disabled). One could argue if this is right
or not "in principle", but it's definitely not how things worked
before per-NAPI config..
Fixes: 2677010e77 ("Add support to set NAPI threaded for individual NAPI")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is a single revert of one of the previous patches that went in the
last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.) It accidentially changed
the ioctl values of some tty ioctls, which breaks xorg.
The revert has been in linux-next all this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaJdfkg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymq2QCgxaxTJGciGevsEi3rcXw+TkS0dq4AniOTgmCb
cLQx6kIGVCucA1dOxWr8
=Vzw4
-----END PGP SIGNATURE-----
Merge tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fix from Greg KH:
"Here is a single revert of one of the previous patches that went in
the last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.)
It accidentially changed the ioctl values of some tty ioctls, which
breaks xorg.
The revert has been in linux-next all this week with no reported
issues"
* tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: vt: use _IO() to define ioctl numbers"
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaJbnoAAKCRAwbglWLn0t
XIhuAQDB+qEzM0nBPRVnlztrjKDbxu01jzFgCuf4egFePs4OjwD/dgNCXXudn5JB
X7VWNi8VQAWBMhijpEKXvDu6f0MXFgw=
=UeGX
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
* tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: add API doc entry for ovmf_debug_log
efistub: Lower default log level
efi: add ovmf debug log driver
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmiWLjoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpvveD/9vbvp3XaF0LagRJLH0fcdhcxL7Z+IHD+7U
v5vICMeoeBhhhOtPJ0y+h/9LMLQWFYDFl6drkY0atSSxp/CK6CB25qFhIDsoA6Qk
RBM/qZ64z4Uxvlc+VQmCqI2EMc/ZrYtrcr7jsornwORoTSEKXVHdyO5k7Q9002Sw
XNWc0bZKIibFlgOk12Wnd8ZS5RWHw1uViUcreojcGVZAVR+BuHNGGoa3xq0bLiHU
ERbQXfjaN28R+eo4E1euCtdf++7tW2kFjClrDmLcszdb27E2+MWMA6AKMiSTBE2k
2e2TvJUcGZs1s8atqSIIjBtmwQW3rKws33zODLMONzOP8CIErcaniHxyDSaxJIJr
kjsdKnwlziL3xVnwQcpgnVOPvvDSKZ4OKEqx8rAuYTqiknpz3uhbt/7EqumuPLHr
e7Rz0MnFolrVN7KZOHQ5CPJIezkEAOAEpItLdfc5cfLS06pbeTN3j+dJZp+tUohi
WP/K3l2N3C5pkXA0ilAzshRF20Rwv/09M85BoqWocTLBJY7WqyIKXywCNdX81wkv
tpbQvp2MpPkJXUIbAh5484BOfCfx9vkYVm2cam2UxXJhR6VfrQCjYfXIjfpqF4jp
q7xxNesUezrOqB2Q/cKxw8dKOaRtO1XzVnmwutBrcKgqqLezMwUTDDjQYe8l6p1Z
40E74tsJwQ==
=EQ7g
-----END PGP SIGNATURE-----
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmiWLk0QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjl3D/0eZiD3qTmdIcf7GNAoaR/aD4zgICEhwEUf
2bzVFJ7RAZeplPhT2QLAf4CRoDui6iYLXaJONNsZc8r355FLKsZcMVmU8FFBnM6Q
chn0wAmv92Jk/fMQWhw1mL4c19jCibTOefzHzm7s2AMhPyhAzlvcMG/Mr9uiNt38
uBXOo9DOkX1fYlUcmYH9v8KDTQBE6UMXeEcDiLvxGUs+JW1hbBAPmh9K3/KJ5qbs
wShNL0UOgq5V/GUZqMr6xRqkW++B/6/v6Y/O+wbJ8lgLV97YQi3xemHu3BCx8Kv4
lbvyctUKCTCgQPgnhluu3KuldDkLn3FA7sQ2g1b1FZWkEpqLhgJIRjgGR53GmeHX
c58VcRc+MNXf+Lzuy7ZbrYdI6Gbt52Ns+g4S05TNo6ZZW0NGyaZK5aeb7qQyhmnY
rCELejwPQKTZv8YfRgV+Kt14x2Z7OdGa49u31JeYUE/IYu9M2FC+XE3//D7Bdz+3
QhU4ZzOW/LRA7xXq/uRb6XK0qRFt34nA+A7jFeKaZbrh6XvXD8VN5MFKkEttcyw5
JCr3jeYV7RbhWuPyKFwAJ4EBn/HnUUEsSEKA5/Rr0tvHkR95ytx+2l3qZfihrCsU
jsjSMCn4PZ+L3t2OQ2EaVEeiJ4oB4zwi37GZdQGiMQ7T46RkSzwBam6sJETFGPhF
TCL70jIwbg==
=LCD/
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Allow vectorized payloads for send/send-zc - like sendmsg, but
without the hassle of a msghdr.
- Fix for an integer wrap that should go to stable, spotted by syzbot.
Nothing alarming here, as you need to be root to hit this.
Nevertheless, it should get fixed.
FWIW, kudos to the syzbot crew for having much nicer reproducers now,
and with nicely annotated source code as well. This is particularly
useful as syzbot uses the raw interface rather than liburing,
historically it's been difficult to turn a syzbot reproducer into a
meaningful test case. With the recent changes, not true anymore!
* tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux:
io_uring/memmap: cast nr_pages to size_t before shifting
io_uring/net: Allow to do vectorized send
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion
-----BEGIN PGP SIGNATURE-----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=MulZ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
A few more small fixes for 6.17-rc1.
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio
and USB-audio drivers
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmiUSVgOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+JqBAAycnLl2xWGMLwJHcXI1DzKjhWLirFnEP7fRuk
0jodv5V/xT8Ij+EO1tMNa54XT2aUqIZSOBxfpZ12uiXpp0g/uguw1HuUvCNpBjqQ
ZWmGymp6ETPe/MM05VNCUizFFT0n62LFLS9AAdxP2dRwHNNnGfxwwdskb5E9bYBA
ulKwtYqfOJvL5sHI767CM7rOi3+b0L/JUIjwYqSYHQTkBNLENSexq6Cb98KOTqG7
3PbF2XnN/8UM35LmpcohIBGijd2C+ok5BjDYkgeBZyLIHQCk+AmBukSQk3r0CG4k
4LkzpYgDapnaJwzqZre/Dho4GZOTeTqJbwocKuL0ZzMKZD7r0KrCLEEKX5ddKADo
tVw+ZkaX5r4wtHNvZ7XvdzskURJjJ2EOzM/pk9V5VCImcBjzxHBTtwpZw8SucZEF
r/OlCiA1neROQii5om41NkEWM/WOHGzcWWXjMsDjPk8tcQRXFFClgQMYXaUYWL70
MbpnFa/hPIQfv37tugh3lOa7FZgqcCpDQJhFecxHF11t+CK8oJ3XxKT6HVIoaKz5
ugLMBT1zusL8jjAj6w7mNW+sqUfdIJ9V7LwSBQDZw1H/4wPpYN/nBlmEXRO21dYn
P/TSWaH9fq6JpOEulIlMN5YU1CkT3DoPaGsmUkzFIPQzwBddYq2sWmlKejmx7mF/
PaJqMCI=
=DJJ8
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio and
USB-audio drivers
* tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/ca0132: Fix missing error handling in ca0132_alt_select_out()
ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies
ALSA: hda/tas2781: Support L"SmartAmpCalibrationData" to save calibrated data
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
ALSA: hda/realtek: add LG gram 16Z90R-A to alc269 fixup table
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
ASoC: tas2781: Fix the wrong step for TLV on tas2781
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platform
ASoC: SOF: amd: Add sof audio support for acp7.2 platform
ASoC: Intel: avs: Fix uninitialized pointer error in probe()
ASoC: wm8962: Clear master mode when enter runtime suspend
ASoC: SOF: amd: acp-loader: Use GFP_KERNEL for DMA allocations in resume context
Highlights include:
Stable fixes:
- NFS don't inherit NFS filesystem capabilities when crossing from one
filesystem to another.
Bugfixes:
- NFS wakeup of __nfs_lookup_revalidate() needs memory barriers.
- NFS improve bounds checking in nfs_fh_to_dentry().
- NFS Fix allocation errors when writing to a NFS file backed loopback
device.
- NFSv4: More listxattr fixes
- SUNRPC: fix client handling of TLS alerts.
- pNFS block/scsi layout fix for an uninitialised pointer dereference.
- pNFS block/scsi layout fixes for the extent encoding, stripe mapping,
and disk offset overflows.
- pNFS layoutcommit work around for RPC size limitations.
- pNFS/flexfiles avoid looping when handling fatal errors after layoutget.
- localio: fix various race conditions.
Features and cleanups:
- Add NFSv4 support for retrieving the btime.
- NFS: Allow folio migration for the case of mode == MIGRATE_SYNC.
- NFS: Support using a kernel keyring to store TLS certificates.
- NFSv4: Speed up delegation lookup using a hash table.
- Assorted cleanups to remove unused variables and struct fields.
- Assorted new tracepoints to improve debugging.
-----BEGIN PGP SIGNATURE-----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=HCFp
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- don't inherit NFS filesystem capabilities when crossing from one
filesystem to another
Bugfixes:
- NFS wakeup of __nfs_lookup_revalidate() needs memory barriers
- NFS improve bounds checking in nfs_fh_to_dentry()
- NFS Fix allocation errors when writing to a NFS file backed
loopback device
- NFSv4: More listxattr fixes
- SUNRPC: fix client handling of TLS alerts
- pNFS block/scsi layout fix for an uninitialised pointer
dereference
- pNFS block/scsi layout fixes for the extent encoding, stripe
mapping, and disk offset overflows
- pNFS layoutcommit work around for RPC size limitations
- pNFS/flexfiles avoid looping when handling fatal errors after
layoutget
- localio: fix various race conditions
Features and cleanups:
- Add NFSv4 support for retrieving the btime
- NFS: Allow folio migration for the case of mode == MIGRATE_SYNC
- NFS: Support using a kernel keyring to store TLS certificates
- NFSv4: Speed up delegation lookup using a hash table
- Assorted cleanups to remove unused variables and struct fields
- Assorted new tracepoints to improve debugging"
* tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (44 commits)
NFS/localio: nfs_uuid_put() fix the wake up after unlinking the file
NFS/localio: nfs_uuid_put() fix races with nfs_open/close_local_fh()
NFS/localio: nfs_close_local_fh() fix check for file closed
NFSv4: Remove duplicate lookups, capability probes and fsinfo calls
NFS: Fix the setting of capabilities when automounting a new filesystem
sunrpc: fix client side handling of tls alerts
nfs/localio: use read_seqbegin() rather than read_seqbegin_or_lock()
NFS: Fixup allocation flags for nfsiod's __GFP_NORETRY
NFSv4.2: another fix for listxattr
NFS: Fix filehandle bounds checking in nfs_fh_to_dentry()
SUNRPC: Silence warnings about parameters not being described
NFS: Clean up pnfs_put_layout_hdr()/pnfs_destroy_layout_final()
NFS: Fix wakeup of __nfs_lookup_revalidate() in unblock_revalidate()
NFS: use a hash table for delegation lookup
NFS: track active delegations per-server
NFS: move the delegation_watermark module parameter
NFS: cleanup nfs_inode_reclaim_delegation
NFS: cleanup error handling in nfs4_server_common_setup
pNFS/flexfiles: don't attempt pnfs on fatal DS errors
NFS: drop __exit from nfs_exit_keyring
...
Page pool can have pages "directly" (locklessly) recycled to it,
if the NAPI that owns the page pool is scheduled to run on the same CPU.
To make this safe we check that the NAPI is disabled while we destroy
the page pool. In most cases NAPI and page pool lifetimes are tied
together so this happens naturally.
The queue API expects the following order of calls:
-> mem_alloc
alloc new pp
-> stop
napi_disable
-> start
napi_enable
-> mem_free
free old pp
Here we allocate the page pool in ->mem_alloc and free in ->mem_free.
But the NAPIs are only stopped between ->stop and ->start. We created
page_pool_disable_direct_recycling() to safely shut down the recycling
in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't
have to worry about recycling any more.
Unfortunately, the page_pool_disable_direct_recycling() is not enough
to deal with failures which necessitate freeing the _new_ page pool.
If we hit a failure in ->mem_alloc or ->stop the new page pool has
to be freed while the NAPI is active (assuming driver attaches the
page pool to an existing NAPI instance and doesn't reallocate NAPIs).
Freeing the new page pool is technically safe because it hasn't been
used for any packets, yet, so there can be no recycling. But the check
in napi_assert_will_not_race() has no way of knowing that. We could
check if page pool is empty but that'd make the check much less likely
to trigger during development.
Add page_pool_enable_direct_recycling(), pairing with
page_pool_disable_direct_recycling(). It will allow us to create the new
page pools in "disabled" state and only enable recycling when we know
the reconfig operation will not fail.
Coincidentally it will also let us re-enable the recycling for the old
pool, if the reconfig failed:
-> mem_alloc (new)
-> stop (old)
# disables direct recycling for old
-> start (new)
# fail!!
-> start (old)
# go back to old pp but direct recycling is lost :(
-> mem_free (new)
The new helper is idempotent to make the life easier for drivers,
which can operate in HDS mode and support zero-copy Rx.
The driver can call the helper twice whether there are two pools
or it has multiple references to a single pool.
Fixes: 40eca00ae6 ("bnxt_en: unlink page pool when stopping Rx queue")
Tested-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a new, optional, callback that allows the driver to
specify how the return data buffer is allocated. If that callback
is set, mailbox/pcc.c is now responsible for reading from and
writing to the PCC shared buffer.
This also allows for proper checks of the Commnand complete flag
between the PCC sender and receiver.
For Type 4 channels, initialize the command complete flag prior
to accepting messages.
Since the mailbox does not know what memory allocation scheme
to use for response messages, the client now has an optional
callback that allows it to allocate the buffer for a response
message.
When an outbound message is written to the buffer, the mailbox
checks for the flag indicating the client wants an tx complete
notification via IRQ. Upon receipt of the interrupt It will
pair it with the outgoing message. The expected use is to
free the kernel memory buffer for the previous outgoing message.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- number of device tree / OF reference leak fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nwy7
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Previous releases - regressions:
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Because it's only used in sbitmap.c
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250807032413.1469456-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
if (index == sb->map_nr - 1)
return sb->depth - (index << sb->shift);
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250807032413.1469456-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With no more users of the legacy GPIO line value setters - .set() and
.set_multiple() - we can now remove them from the kernel.
Link: https://lore.kernel.org/r/20250725074651.14002-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
