Commit graph

561,712 commits

Author SHA1 Message Date
Markus Pargmann
c1b99dedfd ARM: dts: imx6dl: Fix gpt compatibles, remove imx6q-gpt
imx6qdl.dtsi uses compatibles "fsl,imx6q-gpt", "fsl,imx31-gpt".
imx6dl.dtsi uses compatibles "fsl,imx6dl-gpt", "fsl,imx6q-gpt" since
commit

	4e415ed814 (ARM: dts: imx6dl: add imx6dl gpt specific compatible string)

If imx6dl would be compatible with imx6q-gpt it would also have to be
compatible with imx31-gpt which is currently missing.

Based on the above mentioned patch I assume imx6q-gpt and imx6dl-gpt are
not compatible. So imx6q-gpt should be removed as compatible.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:24 +08:00
Tim Harvey
e726a9fdde ARM: dts: imx: ventana: Allow HDMI and LVDS to work simultaneously
Currently it is not possible to have HDMI and LVDS working simultaneously,
because both ports try to use PLL5.

Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be
driven from independent sources.

With this change the LDB pixel clock goes to 68.57 MHz, which is still
within the valid range for the displays supported by the Ventana boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:23 +08:00
Tim Harvey
a7668fda6b ARM: dts: imx: ventana: fix GW53xx/GW54xx lvds channel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:23 +08:00
Tim Harvey
70b6b438cc ARM: dts: imx: ventana: GW54xx PMIC swbst reg always-on
The GW54xx PMIC swbst regulator is used for LVDS power, CANbus xceiver
and HDMI DDC and is enabled by the bootloader. Set the regulator to
always-on so that Linux doesn't turn it off thinking its not needed.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:23 +08:00
Uwe Kleine-König
b312e3600d ARM: dts: imx25-pinfunc: add some more pin configurations
This patch adds some values that are needed for an out-of-tree device
tree I'm currently working with.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:22 +08:00
Fabio Estevam
aab8ec0c73 ARM: dts: imx6ul: Add ADC support
Add support for ADC1.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:22 +08:00
Fabio Estevam
eb45ff7469 ARM: dts: imx6sx: Pass the 'adck-max-frequency' property
Specify the 'adck-max-frequency' property in the adc nodes.

According to Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
this is a recommended property.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:22 +08:00
Peter Chen
2b1a40e8d1 ARM: dts: imx6: change default burst size for USB
It can improve the USB performance when choosing larger
burst size at some systems (bus size is larger), there is
no side effect if this burst size is larger than bus size.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:41:51 +08:00
Peter Chen
9493bf5458 ARM: dts: imx6: set ahb-burst-config as 0 for USB
After setting ahb burst configuration as 0, we can increase tx/rx
burst size, it will improve the USB performance

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:41:32 +08:00
Shawn Guo
c89dcce4e1 Merge branch 'imx/clk' into imx/dt 2015-12-22 20:40:27 +08:00
Songjun Wu
ca6349a8c5 ARM: at91/dt: sama5d2 Xplained: add pdmic node
Add pdmic node on sama5d2-xplained board.The pdmic
pins conflict with ISC_D0 & ISC_D1 data pins.

Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-22 10:37:53 +01:00
Songjun Wu
70450d4d58 ARM: at91/dt: sama5d2: add pdmic node
Add pdmic node.

Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-22 10:37:30 +01:00
Olof Johansson
3a8659772c Device Tree changes adding necessary nodes for syscon reboot/poweroff
handlers on Exynos boards. The mach-exynos changes must base on top
 of this to retain the bisectability of not loosing reboot/poweroff
 features.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWTsTCAAoJEME3ZuaGi4PXFh0P/0nbYXs89Y9guNwDJwlXKrlo
 kfgbZWmsrvbyMp0mTxwF9u2YwEKWycVrgBG5AnT4xaumF+cJoDSGSPb9mRDhNEfl
 9yOb6c+18TyWa7Kwu4Zya2RzOWEMMHorZgcwBBbPqw4pIMF/Oj92Dnl7OuZ19D5m
 DItDAPasw/Q8Kx3N5kksobvOzYbiGT3otG7wnL8xEL13ovTnSx3qB0rkDS4LVYRP
 xLQI8jYzj377B3T0iob0XhbT25CjsGT6B6IwLbrPHG3wkaBMLDlvWyAHtnGFHKX6
 2qSLce8qAJhTCoYqPcBWX4UzddMAY0r0l2AFTmfTQjyLZKGhmex3OvwTZEl/amO4
 t8QE7FrUiGDBzrMQaTPre9xhKyoNeeeSS+OAa3NJT/kpTi70kqC9Vig32xQ7J2PD
 42AuMwHxgUqtDJ2135is0bkutXXfnRTtotICaKPd9j9HNrgwRQ+ffg+jgyuOJmiC
 wsQCCSDhJQ3H3bH/1o8aQmAVvHXyniE5FY+1hFHUhPRmvenceAjLKX2tIc8Wqasu
 W1FKJAYalM4TdXcgmQy56EnXEK+VbIVhNmvnnNUp8+CfpTWS9bMwrH/TlbpDwTkK
 pSC8A6Dols0HgaKzdLbWM0L03mYuWvZ/JO6wW1Y11chPYw234+ph7ez4MBrHLTTF
 QTOPTffhLOcGVBLuFPoi
 =/NF/
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Device Tree changes adding necessary nodes for syscon reboot/poweroff
handlers on Exynos boards. The mach-exynos changes must base on top
of this to retain the bisectability of not loosing reboot/poweroff
features.

* tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5410
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos4
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos3250

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 20:39:19 -08:00
Adam Ford
6c95771f8c ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support
The development kit uses a TSC2004 chip attached to I2C3.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-21 11:10:40 -08:00
Hans de Goede
12ec938403 ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet
The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet,
featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack.

Empire Electronix is written on the back of the tablet, the D709 model
info can be found in the about tablet menu in android.

The PCB has no markings to speak of.

This dts file does not add support for the ft5x touchscreen found at
i2c bus 1, addr 0x38, irq PG11, because it does not work out of the box.
It seems it has been flashed with the wrong firmware and needs to have
alternative firmware uploaded at boot to make the touchscreen work
properly, when hot-booting from android into an upstream kernel the
touchscreen does work.

The Memsic MXC622X accelerometer at i2c bus 1, addr 0x15 also is not
enabled as there is no driver for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 17:10:18 +01:00
Hans de Goede
b3a9995e58 ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT
The Wits Pro A20 DKT has a gbit ethernet port, enable it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 17:08:36 +01:00
Marcus Cooper
8661d0c34e ARM: dt: sun7i: Enable audio codec on MK808C
This commit enables the on-chip audio codec present on the MK808C.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 17:05:06 +01:00
Marcus Cooper
b0389c2caf ARM: sunxi: dt: enable audio codec on mk802
This commit enables the on-chip audio codec present on some variants
of the MK802.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 17:04:48 +01:00
Aleksei Mamlin
9f483c717d ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet
Add PA gpio pin for controlling power of two external amplifiers (NS4890) which are used on the Wexler TAB7200 tablet

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 16:45:08 +01:00
Aleksei Mamlin
028997bb92 ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
Add a backlight for controlling the lcd panel backlight on Wexler TAB7200 tablet

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 16:44:46 +01:00
Aleksei Mamlin
e7bb896a7f ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
Add a node for the Goodix GT911 touchscreen found on the Wexler TAB7200 tablet

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 16:44:08 +01:00
Gregory CLEMENT
3869394ae4 ARM: at91/dt: Add Support for the L+G VInCo platform
The Versatile Industrial Communication platform is a community oriented
board from Landis + Gyr. It comes with:
      - an RS-485 port
      - 2 Ethernet ports
      - a wireless M-BUS
      - a 4G modem
      - a 4MB SPI flash
      - a 4GB eMMC

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-21 15:19:04 +01:00
Marek Vasut
91f69147d6 ARM: socfpga: dts: Enable MMC support at correct place in the DT
The socfpga.dtsi explicitly enabled MMC support, but not all boards are
equiped with an MMC card. There are setups which only have QSPI NOR.
Therefore, disable the MMC support on socfpga.dtsi level and enable it
on per-board basis.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alan Tull <atull@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-12-21 00:44:21 -06:00
Caesar Wang
94cf32b97b ARM: dts: rockchip: add the kylin board for rk3036
This patchset is the initiation version to try work
for kylin board.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-19 18:11:48 +01:00
Caesar Wang
187d7967a5 ARM: dts: rockchip: add the sdio/sdmmc node for rk3036
In general, the sdio/sdmmc is used by the wifi module
and sd card.

let's add the node for these function.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-19 18:11:36 +01:00
Xing Zheng
68556dd775 ARM: dts: rockchip: fix the pinctrl bias settings for rk3036
The pinctrl gpio pull up/down is incorrect since the rk3036 SoCs
can't set the status in the internal.

We should keep the default status for enable the gpio status,
In fact, the pull_none is the disable the gpio pull up/down.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-19 17:58:04 +01:00
Aleksei Mamlin
0e710f1f5b ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet
Wexler TAB7200 tablet use channel 0 of the PWM controller for backlight dimming

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-18 22:25:38 +01:00
Priit Laes
2c102c38d5 ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration
PA GPIO pin (PH15) controls power to external amplifier (FT2012Q).

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-18 22:19:18 +01:00
Hans de Goede
53aa934609 ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet
The pov protab2-ips9 tablet uses the A10's integrated audio codec,
enable it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-18 22:18:19 +01:00
Hans de Goede
a692e00a77 ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet
The UTOO P66 tablet uses the A13's integrated audio codec, enable it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-18 22:18:16 +01:00
Keerthy
fcf589581b ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9
Add regulator-allow-bypass property for ldo9.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-18 08:43:30 -08:00
Keerthy
6686f744df ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2
Add regulator-allow-bypass property for ldo1 and ldo2.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-18 08:43:04 -08:00
Vignesh R
2acb6c3ef8 ARM: dts: AM4372: add entry for qspi mmap region
Add qspi memory mapped region entries for AM43xx based SoCs. Also,
update the binding documents for the controller to document this change.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-18 08:41:31 -08:00
Vignesh R
1929d0b5a8 ARM: dts: DRA7: add entry for qspi mmap region
Add qspi memory mapped region entries for DRA7xx based SoCs. Also,
update the binding documents for the controller to document this change.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-18 08:40:47 -08:00
Marek Vasut
dfd35b779d ARM: socfpga: Repair incorrectly applied MCV patch
For whatever reason, this patch was not applied verbatim and had all
tabs replaced with spaces. Replace them back by a quick sed.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alan Tull <atull@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-12-18 06:22:13 -06:00
Adam Ford
d01d879930 ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries
Revert 6f0f6c40b66 ("ARM: dts: Set VAUX1 and VAUX4 on Logic PD Torpedo")
because it It was already done and it's just a duplicate.  See:
2d11961f3e ("ARM: dts: Set VAUX1 and VAUX4 to 3.0V and 1.8V respectively")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 17:28:54 -08:00
Adam Ford
485fa1261f ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth
Bindings for the WL1283 Bluetooth was removed from the shared transport
driver in commit c0bd1b9e58 ("Revert ti-st: add device tree support")
Until we havea better binding, we need to use the platform data to
initialize Bluetooth.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 10:30:02 -08:00
Adam Ford
60db554de3 ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support
Add basic support for Logic PD type 15 display for older development kits.
This uses GPIO for the backlight.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 10:29:51 -08:00
Uri Mashiach
d284aa27d9 ARM: dts: cm-t335: add support for bluetooth
bluetooth HW is WLS1271 chip connected to UART1.

Device tree modifications:
- Pinmux for UART1.
- Pinmux for bluetooth enable GPIO.

Bluetooth enable GPIO is set to enable during startup by setting the
relevant pinmux pin to pull-up.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 10:04:22 -08:00
Uri Mashiach
3089e40e9f ARM: dts: cm-t335: add support for DVI/LCD
Add pinmux configuration for DVI/LCD.
Add DRM display driver node with timing configurations for DVI and LCD.
Add I2C GPIOs configurations for DVI and LCD enable.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 10:04:22 -08:00
Uri Mashiach
98e5d8987c ARM: dts: cm-t335: add support for I2C GPIO expander
The I2C GPIO expander (PCA9555) adds 16 GPIOs to the module.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 10:04:22 -08:00
Uri Mashiach
c6135a6fd1 ARM: dts: cm-t335: add support for SBC-T335
Add basic support for the SBC-T335.

CompuLab SBC-T335 is a single baseboard computer.
The SBC-T335 is based on the Texas Instruments Cortex-A8 Sitara AM3354
SoC.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 10:03:47 -08:00
Ilya Ledvich
f3e1dee242 ARM: dts: cm-t335: add support for USB0
Enable USB0.

Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 10:02:02 -08:00
Sudeep Holla
0c4d63b323 ARM: dts: omap: replace legacy *,wakeup property with wakeup-source
Though the keyboard and other driver will continue to support the legacy
"gpio-key,wakeup", "linux,wakeup" boolean property to enable the wakeup
source, "wakeup-source" is the new standard binding.

This patch replaces all the legacy wakeup properties with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.

Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 09:52:32 -08:00
Sudeep Holla
3efda00129 ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.

This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.

Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 09:51:48 -08:00
Peter Ujfalusi
cce1ee0001 ARM: DTS: am437x: Use the new DT bindings for the eDMA3
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and
enable the DMA even crossbar with ti,am335x-edma-crossbar.
With the new bindings boards can customize and tweak the DMA channel
priority to match their needs. With the new binding the memcpy is safe
to be used since with the old binding it was not possible for a driver
to know which channel is allowed to be used as non HW triggered channel.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 09:43:08 -08:00
Peter Ujfalusi
b5e5090660 ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and
enable the DMA even crossbar with ti,am335x-edma-crossbar.
With the new bindings boards can customize and tweak the DMA channel
priority to match their needs. With the new binding the memcpy is safe
to be used since with the old binding it was not possible for a driver
to know which channel is allowed to be used as non HW triggered channel.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 09:43:08 -08:00
Tony Lindgren
1f9230fbf3 Merge commit 'ae0add740c' into omap-for-v4.5/dt 2015-12-17 09:41:18 -08:00
Simon Horman
d01c8bec91 ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings
Use recently SoC-specific compatibility strings in r8a779[01] device trees.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-17 10:10:54 +09:00
Andy Gross
4add107457 arm: dts: Add support for PMA8084 on APQ8084
This patch adds support for the PMA8084 regulators found on APQ8084
platforms.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-12-15 23:35:19 -06:00