Commit graph

121,030 commits

Author SHA1 Message Date
Martijn Coenen
3448914e8c loop: Add LOOP_CONFIGURE ioctl
This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.

Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.

In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
  loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
  in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
  in loop_config.info.lo_flags

Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:

vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
    0m03.40s real     0m00.02s user     0m00.03s system

Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:

vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
    0m01.94s real     0m00.01s user     0m00.01s system

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21 08:20:35 -06:00
Martijn Coenen
faf1d25440 loop: Clean up LOOP_SET_STATUS lo_flags handling
LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in
particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas
LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this
explicit by updating the UAPI to include the flags that can be
set/cleared using this ioctl.

The implementation can then blindly take over the passed in flags,
and use the previous flags for those flags that can't be set / cleared
using LOOP_SET_STATUS.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21 08:20:35 -06:00
Arnd Bergmann
de12d92147 Renesas ARM DT updates for v5.8 (take two)
- Initial support for the Renesas RZ/G1H SoC on the iWave RainboW
     Qseven SOM (G21M) and board (G21D),
   - Support for the AISTARVISION MIPI Adapter V2.1 camera board on the
     Silicon Linux EK874 RZ/G2E evaluation kit.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXr5g8QAKCRCKwlD9ZEnx
 cDusAQD4SCmyY0MZZNWQhkhu2ics2wYpKItw4Y7E4fl9XUlXkQEAyyN11vVNoteX
 7KvNX7/9eXpberlcx4H6szPQsOzWzwM=
 =2KDk
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.8 (take two)

  - Initial support for the Renesas RZ/G1H SoC on the iWave RainboW
    Qseven SOM (G21M) and board (G21D),
  - Support for the AISTARVISION MIPI Adapter V2.1 camera board on the
    Silicon Linux EK874 RZ/G2E evaluation kit.

* tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1
  ARM: dts: r8a7742: Add GPIO nodes
  ARM: dts: r8a7742: Add [H]SCIF{A|B} support
  ARM: dts: r8a7742: Add IRQC support
  ARM: dts: r8a7742-iwg21d-q7: Add iWave G21D-Q7 board based on RZ/G1H
  ARM: dts: r8a7742-iwg21m: Add iWave RZ/G1H Qseven SOM
  ARM: dts: r8a7742: Initial SoC device tree
  clk: renesas: Add r8a7742 CPG Core Clock Definitions
  dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros

Link: https://lore.kernel.org/r/20200515100547.14671-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21 16:02:12 +02:00
Sudeep Holla
269fd61e15 firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
Commit f2ae97062a ("firmware: smccc: Refactor SMCCC specific bits into
separate file") introduced the following build warning:

drivers/firmware/smccc/smccc.c:14:13: warning: no previous prototype for
	function 'arm_smccc_version_init' [-Wmissing-prototypes]
 void __init arm_smccc_version_init(u32 version, enum arm_smccc_conduit conduit)
             ^~~~~~~~~~~~~~~~~~~~~~

Fix the same by adding the missing prototype in arm-smccc.h

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200521110836.57252-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-21 14:07:37 +01:00
Arnd Bergmann
8c915019e3 Realtek Arm based SoC DT for v5.8
Add RTD1195, RTD1395 and RTD1619 SoCs as well as Xnano X5 TV box.
 Clean up memory nodes and /soc ranges. Factor out r-bus and partition it
 into CRT, Iso, Misc, SB2 and SCPU Wrapper blocks.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEF08DRxvMIhphdW+W+i7RLT5+AT8FAl64dfoRHGFmYWVyYmVy
 QHN1c2UuZGUACgkQ+i7RLT5+AT+iXA//eNc5DNAN7/B3GcoSaKd4jUfh4aCo2FkO
 octvWWuPdMom1zzzpR5GTi4AxFAj3V4gAwFc0SLxXRC1Mwb1QFoGVXsDsFXclhsA
 LdF73S2umVkl65kDvS8rLqq/1e4TidYI6Nlo5MQWcGrTrrkSZdLxiQlhokwsSoLf
 6lS5SqTXuU0Y7b8TOAgsHXZ8HdeNuM0MBvLrNkWSQokFO8tRPYzP6FmrGCK0Z0DE
 dEarIAgrqw5OOoDgSNH80AWzUZGWJSR9gLsl9JwxgmQoG4b66HJrTYZHZ4ylFaeQ
 GsSwiuy7SM1NrU25i6qIGtj7WueGLYczLEBWwKg5AgNcFqq/hGwmoxsLRhJAyb1J
 jcUiH+sfR5fmcuFjA6k3MRD5rTporkS6e44Xni8/AaElSRgu+YYpsXAUeOenMR9m
 cDuR8DrOKkPWyipRK32WyQsF7P3JPaL9gD6q5hSdIAolEncR6LcHNkMUx0zgb/BL
 +gakFU4lmsV9SEFFVyKUr5w0fZLPPWdeXRFtKNZTsPI/AT4jPztIiszB9NWeumMZ
 54uqsm9ct5flLFbqJ/575NDLQHoIY4uz6gZq/oRKdQ/g0AyCI80ZkqnMzm4om4GZ
 Fpdi63l+e2VAJE77R9tqxmj8LQJE9PfTZNo41zFA8gzCqmBN9Rrzs/E47KCLKQYq
 k54Vwaf891g=
 =wdYa
 -----END PGP SIGNATURE-----

Merge tag 'realtek-dt-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt

Realtek Arm based SoC DT for v5.8

Add RTD1195, RTD1395 and RTD1619 SoCs as well as Xnano X5 TV box.
Clean up memory nodes and /soc ranges. Factor out r-bus and partition it
into CRT, Iso, Misc, SB2 and SCPU Wrapper blocks.

* tag 'realtek-dt-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: (35 commits)
  dt-bindings: reset: rtd1295: Add SB2 reset
  arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes
  arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes
  arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes
  ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes
  arm64: dts: realtek: rtd16xx: Add CRT syscon node
  ARM: dts: rtd1195: Add UART resets
  ARM: dts: rtd1195: Add reset nodes
  dt-bindings: reset: Add Realtek RTD1195
  ARM: dts: rtd1195: Add CRT syscon node
  arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon
  arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon
  arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon
  ARM: dts: rtd1195: Introduce iso and misc syscon
  arm64: dts: realtek: rtd1295: Add Xnano X5
  dt-bindings: arm: realtek: Add Xnano X5
  dt-bindings: vendor-prefixes: Add Xnano
  arm64: dts: realtek: rtd16xx: Add memory reservations
  arm64: dts: realtek: rtd16xx: Carve out boot ROM from memory
  arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB
  ...

Link: https://lore.kernel.org/r/20200510232158.18477-2-afaerber@suse.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21 12:34:23 +02:00
Ran Bi
29ee40091e rtc: mt6397: Add support for the MediaTek MT6358 RTC
This add support for the MediaTek MT6358 RTC. Driver using
compatible data to store different RTC_WRTGR address offset.
This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff
driver which only needed by armv7 CPU without ATF.

Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-21 08:55:48 +01:00
Hsin-Hsiung Wang
2b91c28f2a mfd: Add support for the MediaTek MT6358 PMIC
This adds support for the MediaTek MT6358 PMIC. This is a
multifunction device with the following sub modules:

- Regulator
- RTC
- Codec
- Interrupt

It is interfaced to the host controller using SPI interface
by a proprietary hardware called PMIC wrapper or pwrap.
MT6358 MFD is a child device of the pwrap.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-21 08:55:29 +01:00
Hsin-Hsiung Wang
4e2e7cfec1 mfd: mt6397: Modify suspend/resume behavior
Some pmics don't need backup interrupt settings, so we change to use
pm notifier for the pmics which are necessary to store settings.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-21 08:54:40 +01:00
Al Viro
bbced07d99 get rid of compat_mc_setsockopt()
not used anymore

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 20:31:32 -04:00
Al Viro
d59eb177c8 ip6_mc_msfilter(): pass the address list separately
that way we'll be able to reuse it for compat case

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 20:31:29 -04:00
Al Viro
0dfe6581a7 get rid of compat_mc_getsockopt()
now we can do MCAST_MSFILTER in compat ->getsockopt() without
playing silly buggers with copying things back and forth.
We can form a native struct group_filter (sans the variable-length
tail) on stack, pass that + pointer to the tail of original request
to the helper doing the bulk of the work, then do the rest of
copyout - same as the native getsockopt() does.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 20:31:27 -04:00
Al Viro
931ca7ab7f ip*_mc_gsfget(): lift copyout of struct group_filter into callers
pass the userland pointer to the array in its tail, so that part
gets copied out by our functions; copyout of everything else is
done in the callers.  Rationale: reuse for compat; the array
is the same in native and compat, the layout of parts before it
is different for compat.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 20:31:27 -04:00
Al Viro
63287de66d lift compat definitions of mcast [sg]etsockopt requests into net/compat.h
We want to get rid of compat_mc_[sg]etsockopt() and to have that stuff
handled without compat_alloc_user_space(), extra copying through
userland, etc.  To do that we'll need ipv4 and ipv6 instances of
->compat_[sg]etsockopt() to manipulate the 32bit variants of mcast
requests, so we need to move the definitions of those out of net/compat.c
and into a public header.

This patch just does a mechanical move to include/net/compat.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 20:31:25 -04:00
Chuck Lever
8954c5c212 SUNRPC: Clean up request deferral tracepoints
- Rename these so they are easy to enable and search for as a set
- Move the tracepoints to get a more accurate sense of control flow
- Tracepoints should not fire on xprt shutdown
- Display memory address in case data structure had been corrupted
- Abandon dprintk in these paths

I haven't ever gotten one of these tracepoints to trigger. I wonder
if we should simply remove them.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-05-20 17:30:44 -04:00
Chuck Lever
d88ff9587b SUNRPC: svc_show_status() macro should have enum definitions
Clean up: Add missing TRACE_DEFINE_ENUMs in
include/trace/events/sunrpc.h

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-05-20 17:30:27 -04:00
Chuck Lever
fff1ebb269 SUNRPC: Restructure svc_udp_recvfrom()
Clean up. At this point, we are not ready yet to support bio_vecs in
the UDP transport implementation. However, we can clean up
svc_udp_recvfrom() to match the tracing and straight-lining recently
changes made in svc_tcp_recvfrom().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-05-20 17:30:24 -04:00
Chuck Lever
ca07eda33e SUNRPC: Refactor svc_recvfrom()
This function is not currently "generic" so remove the documenting
comment and rename it appropriately. Its internals are converted to
use bio_vecs for reading from the transport socket.

In existing typical sunrpc uses of bio_vecs, the bio_vec array is
allocated dynamically. Here, instead, an array of bio_vecs is added
to svc_rqst. The lifetime of this array can be greater than one call
to xpo_recvfrom():

- Multiple calls to xpo_recvfrom() might be needed to read an RPC
  message completely.

- At some later point, rq_arg.bvecs will point to this array and it
  will carry the received message into svc_process().

I also expect that a future optimization will remove either the
rq_vec or rq_pages array in favor of rq_bvec, thus conserving the
size of struct svc_rqst.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-05-20 17:30:12 -04:00
Hannes Reinecke
74244b59a8 dm: use dynamic debug instead of compile-time config option
Switch to use dynamic debug to avoid having recompile the kernel
just to enable debugging messages.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-05-20 17:09:45 -04:00
Eric W. Biederman
b8bff59926 exec: Factor security_bprm_creds_for_exec out of security_bprm_set_creds
Today security_bprm_set_creds has several implementations:
apparmor_bprm_set_creds, cap_bprm_set_creds, selinux_bprm_set_creds,
smack_bprm_set_creds, and tomoyo_bprm_set_creds.

Except for cap_bprm_set_creds they all test bprm->called_set_creds and
return immediately if it is true.  The function cap_bprm_set_creds
ignores bprm->calld_sed_creds entirely.

Create a new LSM hook security_bprm_creds_for_exec that is called just
before prepare_binprm in __do_execve_file, resulting in a LSM hook
that is called exactly once for the entire of exec.  Modify the bits
of security_bprm_set_creds that only want to be called once per exec
into security_bprm_creds_for_exec, leaving only cap_bprm_set_creds
behind.

Remove bprm->called_set_creds all of it's former users have been moved
to security_bprm_creds_for_exec.

Add or upate comments a appropriate to bring them up to date and
to reflect this change.

Link: https://lkml.kernel.org/r/87v9kszrzh.fsf_-_@x220.int.ebiederm.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com> # For the LSM and Smack bits
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-20 14:45:31 -05:00
Chuck Lever
6be8c59491 SUNRPC: Refactor recvfrom path dealing with incomplete TCP receives
Clean up: move exception processing out of the main path.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-05-20 15:43:35 -04:00
Chuck Lever
7dae1dd726 SUNRPC: Replace dprintk() call sites in TCP receive path
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-05-20 15:30:51 -04:00
Sudeep Holla
a4fb174651 firmware: smccc: Add function to fetch SMCCC version
For backward compatibility reasons, PSCI maintains SMCCC version as
SMCCC didn't provide ARM_SMCCC_VERSION_FUNC_ID until v1.1.

PSCI initialises both the SMCCC version and conduit. Similar to the
conduit, let us provide accessors to fetch the SMCCC version also so
that other SMCCC v1.1+ features can use it.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-7-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-20 19:10:37 +01:00
Sudeep Holla
f2ae97062a firmware: smccc: Refactor SMCCC specific bits into separate file
In order to add newer SMCCC v1.1+ functionality and to avoid cluttering
PSCI firmware driver with SMCCC bits, let us move the SMCCC specific
details under drivers/firmware/smccc/smccc.c

We can also drop conduit and smccc_version from psci_operations structure
as SMCCC was the sole user and now it maintains those.

No functionality change in this patch though.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-6-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-20 19:10:37 +01:00
Sudeep Holla
ad5a57dfe4 firmware: smccc: Drop smccc_version enum and use ARM_SMCCC_VERSION_1_x instead
Instead of maintaining 2 sets of enums/macros for tracking SMCCC version,
let us drop smccc_version enum and use ARM_SMCCC_VERSION_1_x directly
instead.

This is in preparation to drop smccc_version here and move it separately
under drivers/firmware/smccc.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-5-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-20 19:10:37 +01:00
Sudeep Holla
0441bfe7f0 firmware: smccc: Add the definition for SMCCCv1.2 version/error codes
Add the definition for SMCCC v1.2 version and new error code added.
While at it, also add a note that ARM DEN 0070A is deprecated and is
now merged into the main SMCCC specification(ARM DEN 0028C).

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Link: https://lore.kernel.org/r/20200518091222.27467-4-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-20 19:10:37 +01:00
Sudeep Holla
15c704ab62 firmware: smccc: Update link to latest SMCCC specification
The current link gets redirected to the revision B published in November
2016 though it actually points to the original revision A published in
June 2013.

Let us update the link to point to the latest version, so that it
doesn't get stale anytime soon. Currently it points to v1.2 published in
March 2020(i.e. DEN0028C).

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-3-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-20 19:10:37 +01:00
Arvind Sankar
14c574f35c efi/gop: Add an option to list out the available GOP modes
Add video=efifb:list option to list the modes that are available.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-20-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-20 19:09:20 +02:00
Arvind Sankar
9b47c52756 efi/libstub: Add definitions for console input and events
Add the required typedefs etc for using con_in's simple text input
protocol, and for using the boottime event services.

Also add the prototype for the "stall" boot service.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200518190716.751506-19-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-20 19:09:20 +02:00
Christoph Hellwig
c928f642c2 fs: rename pipe_buf ->steal to ->try_steal
And replace the arcane return value convention with a simple bool
where true means success and false means failure.

[AV: braino fix folded in]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 12:14:10 -04:00
Christoph Hellwig
b8d9e7f241 fs: make the pipe_buf_operations ->confirm operation optional
Just return 0 for success if it is not present.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 12:11:26 -04:00
Christoph Hellwig
76887c2567 fs: make the pipe_buf_operations ->steal operation optional
Just return 1 for failure if it is not present.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 12:11:26 -04:00
Christoph Hellwig
f6dd975583 pipe: merge anon_pipe_buf*_ops
All the op vectors are exactly the same, they are just used to encode
packet or nomerge behavior.  There already is a flag for the packet
behavior, so just add a new one to allow for merging.  Inverting it vs
the previous nomerge special casing actually allows for much nicer code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20 12:11:26 -04:00
Mark Brown
a24490e017
Merge series "MAINTAINER entries for few ROHM power devices" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:
Add maintainer entries to a few ROHM devices and Linear Ranges

Linear Ranges helpers were refactored out of regulator core to lib so
that other drivers could utilize them too. (I guess power/supply drivers
and possibly clk drivers can benefit from them). As regulators is
currently the main user it makes sense the changes to linear_ranges go
through Mark's tree.

During past two years few ROHM PMIC drivers have been added to
mainstream. They deserve a supporter from ROHM side too :)

Patch 1:
	Maintainer entries for few ROHM IC drivers
Patch 2:
	Maintainer entry for linear ranges helpers

---

Matti Vaittinen (2):
  MAINTAINERS: Add entry for ROHM power management ICs
  MAINTAINERS: Add maintainer entry for linear ranges helper

 MAINTAINERS | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

base-commit: b9bbe6ed63
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
2020-05-20 16:09:02 +01:00
Peng Fan
f72130c6b6 ARM: imx: move cpu definitions into a header
The soc device register code will be moved to drivers/soc/imx/,
the code needs the cpu type definitions. So let's move the cpu
type definitions to a header.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20 23:03:47 +08:00
David Howells
d1f129470e rxrpc: Trace discarded ACKs
Add a tracepoint to track received ACKs that are discarded due to being
outside of the Tx window.

Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-20 15:33:41 +01:00
Luiz Augusto von Dentz
3ca44c16b0 Bluetooth: Consolidate encryption handling in hci_encrypt_cfm
This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection
state is BT_CONFIG so callers don't have to check the state.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-20 16:30:33 +02:00
Michael Ellerman
217ba7dcce Merge branch 'topic/uaccess-ppc' into next
Merge our uaccess-ppc topic branch. It is based on the uaccess topic
branch that we're sharing with Viro.

This includes the addition of user_[read|write]_access_begin(), as
well as some powerpc specific changes to our uaccess routines that
would conflict badly if merged separately.
2020-05-20 23:37:33 +10:00
Wolfram Sang
f89c326dca Merge branch 'i2c/for-current-fixed' into i2c/for-5.8 2020-05-20 15:27:45 +02:00
Bibby Hsieh
6fe12cdbcf i2c: core: support bus regulator controlling in adapter
Although in the most platforms, the bus power of i2c
are alway on, some platforms disable the i2c bus power
in order to meet low power request.

We get and enable bulk regulator in i2c adapter device.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-20 15:25:55 +02:00
Pierre-Louis Bossart
6bf393c577 soundwire: disco: s/ch/channels/
Use more meaningful member names in preparation for sysfs support.
No functionality change.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200518203551.2053-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20 17:22:30 +05:30
Tim Harvey
3bce5377ef hwmon: Add Gateworks System Controller support
The Gateworks System Controller has a hwmon sub-component that exposes
up to 16 ADC's, some of which are temperature sensors, others which are
voltage inputs. The ADC configuration (register mapping and name) is
configured via device-tree and varies board to board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-20 10:29:17 +01:00
Tim Harvey
d85234994b mfd: Add Gateworks System Controller core driver
The Gateworks System Controller (GSC) is an I2C slave controller
implemented with an MSP430 micro-controller whose firmware embeds the
following features:
 - I/O expander (16 GPIO's) using PCA955x protocol
 - Real Time Clock using DS1672 protocol
 - User EEPROM using AT24 protocol
 - HWMON using custom protocol
 - Interrupt controller with tamper detect, user pushbotton
 - Watchdog controller capable of full board power-cycle
 - Power Control capable of full board power-cycle

see http://trac.gateworks.com/wiki/gsc for more details

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-20 10:28:57 +01:00
Gustavo A. R. Silva
db5871e855 vmbus: Replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507185323.GA14416@embeddedor
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-05-20 09:13:59 +00:00
Andy Shevchenko
b7d18c57c9 hyper-v: Switch to use UUID types directly
uuid_le is an alias for guid_t and is going to be removed in the future.
Replace it with original type.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200423134505.78221-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-05-20 09:13:59 +00:00
Michael Kelley
88b42da6e3 asm-generic/hyperv: Add definitions for Get/SetVpRegister hypercalls
Add definitions for GetVpRegister and SetVpRegister hypercalls, which
are implemented for both x86 and ARM64.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200422195737.10223-5-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-05-20 09:13:58 +00:00
Michael Kelley
c55a844f46 x86/hyperv: Split hyperv-tlfs.h into arch dependent and independent files
In preparation for adding ARM64 support, split hyperv-tlfs.h into
architecture dependent and architecture independent files, similar
to what has been done with mshyperv.h. Move architecture independent
definitions into include/asm-generic/hyperv-tlfs.h.  The split will
avoid duplicating significant lines of code in the ARM64 version of
hyperv-tlfs.h.  The split has no functional impact.

Some of the common definitions have "X64" in the symbol name.  Change
these to remove the "X64" in the architecture independent version of
hyperv-tlfs.h, but add aliases with the "X64" in the x86 version so
that x86 code will continue to compile.  A later patch set will
change all the references and allow removal of the aliases.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200422195737.10223-4-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-05-20 09:13:58 +00:00
Andrea Parri (Microsoft)
7769e18c20 scsi: storvsc: Re-init stor_chns when a channel interrupt is re-assigned
For each storvsc_device, storvsc keeps track of the channel target CPUs
associated to the device (alloced_cpus) and it uses this information to
fill a "cache" (stor_chns) mapping CPU->channel according to a certain
heuristic.  Update the alloced_cpus mask and the stor_chns array when a
channel of the storvsc device is re-assigned to a different CPU.

Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
Link: https://lore.kernel.org/r/20200406001514.19876-12-parri.andrea@gmail.com
Reviewed-by; Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
[ wei: fix a small issue reported by kbuild test robot <lkp@intel.com> ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-05-20 09:13:19 +00:00
Niklas Schnelle
a1ceea67f2 PCI/IOV: Introduce pci_iov_sysfs_link() function
Currently pci_iov_add_virtfn() scans the SR-IOV BARs, adds the VF to the
bus and also creates the sysfs links between the newly added VF and its
parent PF.

With pdev->no_vf_scan fencing off the entire pci_iov_add_virtfn() call
s390 as the sole pdev->no_vf_scan user thus ends up missing these sysfs
links which are required for example by QEMU/libvirt.

Instead of duplicating the code refactor pci_iov_add_virtfn() to make
sysfs link creation callable separately.

Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506154139.90609-1-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-20 10:22:50 +02:00
Paolo Bonzini
9d5272f5e3 Merge tag 'noinstr-x86-kvm-2020-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD 2020-05-20 03:40:09 -04:00
Paolo Bonzini
febd668d37 rcuwait: avoid lockdep splats from rcuwait_active()
rcuwait_active only returns whether w->task is not NULL.  This is
exactly one of the usecases that are mentioned in the documentation
for rcu_access_pointer() where it is correct to bypass lockdep checks.

This avoids a splat from kvm_vcpu_on_spin().

Reported-by: Wanpeng Li <kernellwp@gmail.com>
Tested-by: Wanpeng Li <kernellwp@gmail.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-20 03:39:40 -04:00