Commit graph

121,030 commits

Author SHA1 Message Date
Laurent Pinchart
e5b6b07a1b media: v4l2: Extend VIDIOC_ENUM_FMT to support MC-centric devices
The VIDIOC_ENUM_FMT ioctl enumerates all formats supported by a video
node. For MC-centric devices, its behaviour has always been ill-defined,
with drivers implementing one of the following behaviours:

- No support for VIDIOC_ENUM_FMT at all
- Enumerating all formats supported by the video node, regardless of the
  configuration of the pipeline
- Enumerating formats supported by the video node for the active
  configuration of the connected subdevice

The first behaviour is obviously useless for applications. The second
behaviour provides the most information, but doesn't offer a way to find
what formats are compatible with a given pipeline configuration. The
third behaviour fixes that, but with the drawback that applications
can't enumerate all supported formats anymore, and have to modify the
active configuration of the pipeline to enumerate formats.

The situation is messy as none of the implemented behaviours are ideal,
and userspace can't predict what will happen as the behaviour is
driver-specific.

To fix this, let's extend the VIDIOC_ENUM_FMT with a missing capability:
enumerating pixel formats for a given media bus code. The media bus code
is passed through the v4l2_fmtdesc structure in a new mbus_code field
(repurposed from the reserved fields). With this capability in place,
applications can enumerate pixel formats for a given media bus code
without modifying the active configuration of the device.

The current behaviour of the ioctl is preserved when the new mbus_code
field is set to 0, ensuring compatibility with existing userspace. The
API extension is documented as mandatory for MC-centric devices (as
advertised through the V4L2_CAP_IO_MC capability), allowing applications
and compliance tools to easily determine the availability of the
VIDIOC_ENUM_FMT extension.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-06 12:09:04 +02:00
Niklas Söderlund
f645e6256b media: v4l2-dev/ioctl: Add V4L2_CAP_IO_MC
Add a video device capability flag to indicate that its inputs and/or
outputs are controlled by the Media Controller instead of the V4L2 API.
When this flag is set, ioctl for enum inputs and outputs are
automatically enabled and programmed to call a helper function.

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-06 12:08:25 +02:00
Jerome Brunet
3a5fc2520b dt-bindings: reset: meson: add gxl internal dac reset
Add the reset line of the internal DAC found on the amlogic gxl SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-05-06 12:03:43 +02:00
Anson Huang
c4e181d6fe dt-bindings: reset: imx7: Document usage on i.MX8MP SoC
The driver now supports i.MX8MP, so update bindings accordingly.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-05-06 12:03:43 +02:00
Anson Huang
ecd910f442 dt-bindings: reset: imx7: Add support for i.MX8MN
i.MX8MN can reuse i.MX8MQ's reset driver, update the compatible
property and related info to support i.MX8MN.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-05-06 12:03:43 +02:00
Kai-Heng Feng
57a29df341 iopoll: Introduce read_poll_timeout_atomic macro
Like read_poll_timeout, an atomic variant for multiple parameter read
function can be useful.

Will be used by a later patch.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200424184918.30360-1-kai.heng.feng@canonical.com
2020-05-06 11:29:25 +03:00
Florian Westphal
2ab6096db2 xfrm: remove output_finish indirection from xfrm_state_afinfo
There are only two implementaions, one for ipv4 and one for ipv6.

Both are almost identical, they clear skb->cb[], set the TRANSFORMED flag
in IP(6)CB and then call the common xfrm_output() function.

By placing the IPCB handling into the common function, we avoid the need
for the output_finish indirection as the output functions can simply
use xfrm_output().

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-06 09:40:08 +02:00
Florian Westphal
f3075f48dd xfrm: remove extract_output indirection from xfrm_state_afinfo
Move this to xfrm_output.c.  This avoids the state->extract_output
indirection.

This patch also removes the duplicated __xfrm6_extract_header helper
added in an earlier patch, we can now use the one from xfrm_inout.h .

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-06 09:40:08 +02:00
Florian Westphal
ede64dd2bf xfrm: place xfrm6_local_dontfrag in xfrm.h
so next patch can re-use it from net/xfrm/xfrm_output.c without
causing a linker error when IPV6 is a module.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-06 09:40:08 +02:00
Florian Westphal
3e50ddd8b8 xfrm: expose local_rxpmtu via ipv6_stubs
We cannot call this function from the core kernel unless we would force
CONFIG_IPV6=y.

Therefore expose this via ipv6_stubs so we can call it from net/xfrm
in the followup patch.

Since the call is expected to be unlikely, no extra code for the IPV6=y
case is added and we will always eat the indirection cost.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-06 09:40:08 +02:00
Florian Westphal
171916cbd5 xfrm: move xfrm4_extract_header to common helper
The function only initializes the XFRM CB in the skb.

After previous patch xfrm4_extract_header is only called from
net/xfrm/xfrm_{input,output}.c.

Because of IPV6=m linker errors the ipv6 equivalent
(xfrm6_extract_header) was already placed in xfrm_inout.h because
we can't call functions residing in a module from the core.

So do the same for the ipv4 helper and place it next to the ipv6 one.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-06 09:40:08 +02:00
Florian Westphal
a269fbfc4e xfrm: state: remove extract_input indirection from xfrm_state_afinfo
In order to keep CONFIG_IPV6=m working, xfrm6_extract_header needs to be
duplicated.  It will be removed again in a followup change when the
remaining caller is moved to net/xfrm as well.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-06 09:40:08 +02:00
Florian Westphal
6d64be3da2 xfrm: avoid extract_output indirection for ipv4
We can use a direct call for ipv4, so move the needed functions
to net/xfrm/xfrm_output.c and call them directly.

For ipv6 the indirection can be avoided as well but it will need
a bit more work -- to ease review it will be done in another patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-06 09:40:08 +02:00
Jason Yan
79263c3bce ALSA: hda: Return true,false for return type bool
Fix the following coccicheck warning:

include/sound/hdaudio.h:210:73-74: WARNING: return of 0/1 in function
'snd_hdac_is_in_pm' with return type bool
include/sound/hdaudio.h:211:76-77: WARNING: return of 0/1 in function
'snd_hdac_is_power_on' with return type bool

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200506061716.19209-1-yanaijie@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-06 08:37:13 +02:00
Peter Chen
d755cdb1b9
usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use
Some vendors glue layer need to handle some events for vbus, eg,
some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event
to handle charger detection, its charger detection is finished at
glue layer code, but not at USB PHY driver.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06 09:41:55 +08:00
Wolfram Sang
18f423748b Input: lm8333 - update contact email
The 'pengutronix' address is defunct for years. Use the proper contact
address.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20200502142639.18925-1-wsa@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-05 17:12:06 -07:00
John Fastabend
81aabbb9fb bpf, sockmap: bpf_tcp_ingress needs to subtract bytes from sg.size
In bpf_tcp_ingress we used apply_bytes to subtract bytes from sg.size
which is used to track total bytes in a message. But this is not
correct because apply_bytes is itself modified in the main loop doing
the mem_charge.

Then at the end of this we have sg.size incorrectly set and out of
sync with actual sk values. Then we can get a splat if we try to
cork the data later and again try to redirect the msg to ingress. To
fix instead of trying to track msg.size do the easy thing and include
it as part of the sk_msg_xfer logic so that when the msg is moved the
sg.size is always correct.

To reproduce the below users will need ingress + cork and hit an
error path that will then try to 'free' the skmsg.

[  173.699981] BUG: KASAN: null-ptr-deref in sk_msg_free_elem+0xdd/0x120
[  173.699987] Read of size 8 at addr 0000000000000008 by task test_sockmap/5317

[  173.700000] CPU: 2 PID: 5317 Comm: test_sockmap Tainted: G          I       5.7.0-rc1+ #43
[  173.700005] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[  173.700009] Call Trace:
[  173.700021]  dump_stack+0x8e/0xcb
[  173.700029]  ? sk_msg_free_elem+0xdd/0x120
[  173.700034]  ? sk_msg_free_elem+0xdd/0x120
[  173.700042]  __kasan_report+0x102/0x15f
[  173.700052]  ? sk_msg_free_elem+0xdd/0x120
[  173.700060]  kasan_report+0x32/0x50
[  173.700070]  sk_msg_free_elem+0xdd/0x120
[  173.700080]  __sk_msg_free+0x87/0x150
[  173.700094]  tcp_bpf_send_verdict+0x179/0x4f0
[  173.700109]  tcp_bpf_sendpage+0x3ce/0x5d0

Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/158861290407.14306.5327773422227552482.stgit@john-Precision-5820-Tower
2020-05-06 00:22:22 +02:00
Eric W. Biederman
fa4751f454 binfmt_elf: remove the set_fs in fill_siginfo_note
The code in binfmt_elf.c is differnt from the rest of the code that
processes siginfo, as it sends siginfo from a kernel buffer to a file
rather than from kernel memory to userspace buffers.  To remove it's
use of set_fs the code needs some different siginfo helpers.

Add the helper copy_siginfo_to_external to copy from the kernel's
internal siginfo layout to a buffer in the siginfo layout that
userspace expects.

Modify fill_siginfo_note to use copy_siginfo_to_external instead of
set_fs and copy_siginfo_to_user.

Update compat_binfmt_elf.c to use the previously added
copy_siginfo_to_external32 to handle the compat case.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-05 16:46:10 -04:00
Christoph Hellwig
c3b3f52476 signal: refactor copy_siginfo_to_user32
Factor out a copy_siginfo_to_external32 helper from
copy_siginfo_to_user32 that fills out the compat_siginfo, but does so
on a kernel space data structure.  With that we can let architectures
override copy_siginfo_to_user32 with their own implementations using
copy_siginfo_to_external32.  That allows moving the x32 SIGCHLD purely
to x86 architecture code.

As a nice side effect copy_siginfo_to_external32 also comes in handy
for avoiding a set_fs() call in the coredump code later on.

Contains improvements from Eric W. Biederman <ebiederm@xmission.com>
and Arnd Bergmann <arnd@arndb.de>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-05 16:46:09 -04:00
William Tu
f989d546a2 erspan: Add type I version 0 support.
The Type I ERSPAN frame format is based on the barebones
IP + GRE(4-byte) encapsulation on top of the raw mirrored frame.
Both type I and II use 0x88BE as protocol type. Unlike type II
and III, no sequence number or key is required.
To creat a type I erspan tunnel device:
  $ ip link add dev erspan11 type erspan \
            local 172.16.1.100 remote 172.16.1.200 \
            erspan_ver 0

Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 13:23:29 -07:00
Rob Herring
9b06fc3908 ARM: vexpress: Move vexpress_flags_set() into arch code
vexpress_flags_set() is only used by the platform SMP related code and
has nothing to do with the vexpress-sysreg MFD driver other than both
access the same h/w block. It's also only needed for 32-bit systems and
must be built-in for them. Let's move vexpress_flags_set() closer to
where it is being used. This will allow for vexpress-sysreg to be built
as a module.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-05 11:42:39 -05:00
Mauro Carvalho Chehab
982649915d docs: filesystems: convert configfs.txt to ReST
- Add a SPDX header;
- Adjust document and section titles;
- Use copyright symbol;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/index.rst.

Also, as this file is alone on its own dir, and it doesn't
seem too likely that other documents will follow it, let's
move it to the filesystems/ root documentation dir.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c2424ec2ad4d735751434ff7f52144c44aa02d5a.1588021877.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05 09:23:25 -06:00
Mauro Carvalho Chehab
791a17ee19 docs: filesystems: convert mount_api.txt to ReST
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add lists markups;
- Add it to filesystems/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/32332c1659a28c22561cb5e64162c959856066b4.1588021877.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05 09:22:23 -06:00
Mauro Carvalho Chehab
0e822145b5 docs: filesystems: caching/backend-api.txt: convert it to ReST
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add table markups;
- Add it to filesystems/caching/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5d0a61abaa87bfe913b9e2f321e74ef7af0f3dfc.1588021877.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05 09:22:21 -06:00
Mauro Carvalho Chehab
efc930fa1d docs: filesystems: caching/netfs-api.txt: convert it to ReST
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to filesystems/caching/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/cfe4cb1bf8e1f0093d44c30801ec42e74721e543.1588021877.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05 09:22:20 -06:00
Jeffrey Hugo
af2e588180 bus: mhi: core: Fix typo in comment
There is a typo - "runtimet" should be "runtime".  Fix it.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200430190555.32741-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05 16:58:36 +02:00
Jeffrey Hugo
45723a4484 bus: mhi: core: Offload register accesses to the controller
When reading or writing MHI registers, the core assumes that the physical
link is a memory mapped PCI link.  This assumption may not hold for all
MHI devices.  The controller knows what is the physical link (ie PCI, I2C,
SPI, etc), and therefore knows the proper methods to access that link.
The controller can also handle link specific error scenarios, such as
reading -1 when the PCI link went down.

Therefore, it is appropriate that the MHI core requests the controller to
make register accesses on behalf of the core, which abstracts the core
from link specifics, and end up removing an unnecessary assumption.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200430190555.32741-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05 16:58:35 +02:00
Jeffrey Hugo
85a087df4a bus: mhi: core: Remove link_status() callback
If the MHI core detects invalid data due to a PCI read, it calls into
the controller via link_status() to double check that the link is infact
down.  All in all, this is pretty pointless, and racy.  There are no good
reasons for this, and only drawbacks.

Its pointless because chances are, the controller is going to do the same
thing to determine if the link is down - attempt a PCI access and compare
the result.  This does not make the link status decision any smarter.

Its racy because its possible that the link was down at the time of the
MHI core access, but then recovered before the controller access.  In this
case, the controller will indicate the link is not down, and the MHI core
will precede to use a bad value as the MHI core does not attempt to retry
the access.

Retrying the access in the MHI core is a bad idea because again, it is
racy - what if the link is down again?  Furthermore, there may be some
higher level state associated with the link status, that is now invalid
because the link went down.

The only reason why the MHI core could see "invalid" data when doing a PCI
access, that is actually valid, is if the register actually contained the
PCI spec defined sentinel for an invalid access.  In this case, it is
arguable that the MHI implementation broken, and should be fixed, not
worked around.

Therefore, remove the link_status() callback before anyone attempts to
implement it.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200430190555.32741-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05 16:58:35 +02:00
Manivannan Sadhasivam
115f32512f bus: mhi: Fix parsing of mhi_flags
With the current parsing of mhi_flags, the following statement always
return false:

eob = !!(flags & MHI_EOB);

This is due to the fact that 'enum mhi_flags' starts with index 0 and we
are using direct AND operation to extract each bit. Fix this by using
BIT() macros for defining the flags so that the reset of the code need not
be touched.

Fixes: 189ff97cca ("bus: mhi: core: Add support for data transfer")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200430190555.32741-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05 16:56:41 +02:00
Wolfram Sang
2f5a55c52c i2c: use my kernel.org address from now on
The old email is still active, but for easier handling, I am going to
use my kernel.org address from now on. Also, add a mailmap for the now
defunct Pengutronix address.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05 16:29:09 +02:00
Will Deacon
e5159827e0 Merge branches 'for-next/asm' and 'for-next/insn' into for-next/bti
Merge in dependencies for in-kernel Branch Target Identification support.

* for-next/asm:
  arm64: Disable old style assembly annotations
  arm64: kernel: Convert to modern annotations for assembly functions
  arm64: entry: Refactor and modernise annotation for ret_to_user
  x86/asm: Provide a Kconfig symbol for disabling old assembly annotations
  x86/32: Remove CONFIG_DOUBLEFAULT

* for-next/insn:
  arm64: insn: Report PAC and BTI instructions as skippable
  arm64: insn: Don't assume unrecognized HINTs are skippable
  arm64: insn: Provide a better name for aarch64_insn_is_nop()
  arm64: insn: Add constants for new HINT instruction decode
2020-05-05 15:19:09 +01:00
Will Deacon
80e4e56132 Merge branch 'for-next/bti-user' into for-next/bti
Merge in user support for Branch Target Identification, which narrowly
missed the cut for 5.7 after a late ABI concern.

* for-next/bti-user:
  arm64: bti: Document behaviour for dynamically linked binaries
  arm64: elf: Fix allnoconfig kernel build with !ARCH_USE_GNU_PROPERTY
  arm64: BTI: Add Kconfig entry for userspace BTI
  mm: smaps: Report arm64 guarded pages in smaps
  arm64: mm: Display guarded pages in ptdump
  KVM: arm64: BTI: Reset BTYPE when skipping emulated instructions
  arm64: BTI: Reset BTYPE when skipping emulated instructions
  arm64: traps: Shuffle code to eliminate forward declarations
  arm64: unify native/compat instruction skipping
  arm64: BTI: Decode BYTPE bits when printing PSTATE
  arm64: elf: Enable BTI at exec based on ELF program properties
  elf: Allow arch to tweak initial mmap prot flags
  arm64: Basic Branch Target Identification support
  ELF: Add ELF program property parsing support
  ELF: UAPI and Kconfig additions for ELF program properties
2020-05-05 15:15:58 +01:00
Russell King
79622f372b i2c: pxa: move private definitions to i2c-pxa.c
Move driver-private definitions out of the i2c-pxa.h platform data
header file into the driver itself. Nothing outside of the driver
makes use of these constants.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05 14:50:41 +02:00
Joerg Roedel
1b032ec1ec iommu: Unexport iommu_group_get_for_dev()
The function is now only used in IOMMU core code and shouldn't be used
outside of it anyway, so remove the export for it.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-35-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05 14:36:14 +02:00
Joerg Roedel
3eeeb45c6d iommu: Remove add_device()/remove_device() code-paths
All drivers are converted to use the probe/release_device()
call-backs, so the add_device/remove_device() pointers are unused and
the code using them can be removed.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-33-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05 14:36:14 +02:00
Joerg Roedel
5012c39685 iommu: Export bus_iommu_probe() and make is safe for re-probing
Add a check to the bus_iommu_probe() call-path to make sure it ignores
devices which have already been successfully probed. Then export the
bus_iommu_probe() function so it can be used by IOMMU drivers.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-14-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05 14:36:13 +02:00
Joerg Roedel
a6a4c7e2c5 iommu: Add probe_device() and release_device() call-backs
Add call-backs to 'struct iommu_ops' as an alternative to the
add_device() and remove_device() call-backs, which will be removed when
all drivers are converted.

The new call-backs will not setup IOMMU groups and domains anymore,
so also add a probe_finalize() call-back where the IOMMU driver can do
per-device setup work which require the device to be set up with a
group and a domain.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-8-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05 14:36:12 +02:00
Sai Praneeth Prakhya
4cbf38511a iommu: Add def_domain_type() callback in iommu_ops
Some devices are reqired to use a specific type (identity or dma)
of default domain when they are used with a vendor iommu. When the
system level default domain type is different from it, the vendor
iommu driver has to request a new default domain with
iommu_request_dma_domain_for_dev() and iommu_request_dm_for_dev()
in the add_dev() callback. Unfortunately, these two helpers only
work when the group hasn't been assigned to any other devices,
hence, some vendor iommu driver has to use a private domain if
it fails to request a new default one.

This adds def_domain_type() callback in the iommu_ops, so that
any special requirement of default domain for a device could be
aware by the iommu generic layer.

Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
[ jroedel@suse.de: Added iommu_get_def_domain_type() function and use
                   it to allocate the default domain ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05 14:36:12 +02:00
Nirmoy Das
0cdea4455a drm/mm: optimize rb_hole_addr rbtree search
Userspace can severely fragment rb_hole_addr rbtree by manipulating
alignment while allocating buffers. Fragmented rb_hole_addr rbtree
would result in large delays while allocating buffer object for a
userspace application. It takes long time to find suitable hole
because if we fail to find a suitable hole in the first attempt
then we look for neighbouring nodes using rb_prev()/rb_next().
Traversing rbtree using rb_prev()/rb_next() can take really long
time if the tree is fragmented.

This patch improves searches in fragmented rb_hole_addr rbtree by
modifying it to an augmented rbtree which will store an extra field
in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum
hole size for its subtree in drm_mm_node->subtree_max_hole. Using
drm_mm_node->subtree_max_hole, it is possible to eliminate a complete
subtree if that subtree is unable to serve a request hence reducing
number of rb_prev()/rb_next() used.

With this patch applied, 1 million bo allocs on amdgpu took ~8 sec,
compared to 50k bo allocs which took 28 sec without it.

partial test code:
int test_fragmentation(void)
{

	int i = 0;
        uint32_t  minor_version;
        uint32_t  major_version;

        struct amdgpu_bo_alloc_request request = {};
        amdgpu_bo_handle vram_handle[MAX_ALLOC] = {};
        amdgpu_device_handle device_handle;

        request.alloc_size = 4096;
        request.phys_alignment = 8192;
        request.preferred_heap = AMDGPU_GEM_DOMAIN_VRAM;

        int fd = open("/dev/dri/card0", O_RDWR | O_CLOEXEC);
        amdgpu_device_initialize(fd, &major_version,  &minor_version,
				 &device_handle);

        for (i = 0; i < MAX_ALLOC; i++) {
                amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]);
        }

        for (i = 0; i < MAX_ALLOC; i++)
                amdgpu_bo_free(vram_handle[i]);

        return 0;
}

v2:
Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole
v3:
insert_hole_addr() should be static a function
fix return value of next_hole_high_addr()/next_hole_low_addr()
Reported-by: kbuild test robot <lkp@intel.com>
v4:
Fix commit message.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/364341/
Signed-off-by: Christian König <christian.koenig@amd.com>
2020-05-05 13:39:38 +02:00
Maya Rashish
b7301fd812 drm/ttm: Remove reference to the mem_glob member
It was removed in:

Author: Christian König <christian.koenig@amd.com>
Date:   Wed Sep 25 11:38:50 2019 +0200

    drm/ttm: remove pointers to globals

Signed-off-by: Maya Rashish <coypu@sdf.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/360750/
Signed-off-by: Christian König <christian.koenig@amd.com>
2020-05-05 13:36:09 +02:00
Aneesh Kumar K.V
93a98695f2 mm: change pmdp_huge_get_and_clear_full take vm_area_struct as arg
We will use this in later patch to do tlb flush when clearing pmd entries.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200505071729.54912-22-aneesh.kumar@linux.ibm.com
2020-05-05 21:20:13 +10:00
Emmanuel Vadot
ca96088aa0 drm/client: Dual licence the header in GPL-2 and MIT
Source file was dual licenced but the header was omitted, fix that.
Contributors for this file are:
Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper <matthew.d.roper@intel.com>
Maxime Ripard <mripard@kernel.org>
Noralf Trønnes <noralf@tronnes.org>
Thomas Zimmermann <tzimmermann@suse.de>

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430153347.85323-1-manu@FreeBSD.org
2020-05-05 10:53:05 +02:00
Tao Ren
17309a6a43 usb: gadget: add "usb_validate_langid" function
The USB LANGID validation code in "check_user_usb_string" function is
moved to "usb_validate_langid" function which can be used by other usb
gadget drivers.

Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-05 10:58:51 +03:00
Kai-Heng Feng
8c11827bba ALSA: hda: Use hdac_to_hda_codec macro
Use hdac_to_hda_codec() instead of container_of().

No functional change intended.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200505030357.28004-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-05 08:59:02 +02:00
Mauro Carvalho Chehab
d8e81bc3e8 docs: dt: convert usage-model.txt to ReST
- Add a SPDX header;
- Adjust document title;
- Use footnoote markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-04 16:22:11 -05:00
Magnus Karlsson
07bf2d97d1 xsk: Remove unnecessary member in xdp_umem
Remove the unnecessary member of address in struct xdp_umem as it is
only used during the umem registration. No need to carry this around
as it is not used during run-time nor when unregistering the umem.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1588599232-24897-3-git-send-email-magnus.karlsson@intel.com
2020-05-04 22:56:26 +02:00
Magnus Karlsson
e4e5aefc11 xsk: Change two variable names for increased clarity
Change two variables names so that it is clearer what they
represent. The first one is xsk_list that in fact only contains the
list of AF_XDP sockets with a Tx component. Change this to xsk_tx_list
for improved clarity. The second variable is size in the ring
structure. One might think that this is the size of the ring, but it
is in fact the size of the umem, copied into the ring structure to
improve performance. Rename this variable umem_size to avoid any
confusion.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1588599232-24897-2-git-send-email-magnus.karlsson@intel.com
2020-05-04 22:56:26 +02:00
Arnd Bergmann
d26c0cc539 bpf: Avoid gcc-10 stringop-overflow warning in struct bpf_prog
gcc-10 warns about accesses to zero-length arrays:

kernel/bpf/core.c: In function 'bpf_patch_insn_single':
cc1: warning: writing 8 bytes into a region of size 0 [-Wstringop-overflow=]
In file included from kernel/bpf/core.c:21:
include/linux/filter.h:550:20: note: at offset 0 to object 'insnsi' with size 0 declared here
  550 |   struct bpf_insn  insnsi[0];
      |                    ^~~~~~

In this case, we really want to have two flexible-array members,
but that is not possible. Removing the union to make insnsi a
flexible-array member while leaving insns as a zero-length array
fixes the warning, as nothing writes to the other one in that way.

This trick only works on linux-3.18 or higher, as older versions
had additional members in the union.

Fixes: 60a3b2253c ("net: bpf: make eBPF interpreter images read-only")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200430213101.135134-6-arnd@arndb.de
2020-05-04 22:54:42 +02:00
Cong Wang
e7511f560f bonding: remove useless stats_lock_key
After commit b3e80d44f5
("bonding: fix lockdep warning in bond_get_stats()") the dynamic
key is no longer necessary, as we compute nest level at run-time.
So, we can just remove it to save some lockdep key entries.

Test commands:
 ip link add bond0 type bond
 ip link add bond1 type bond
 ip link set bond0 master bond1
 ip link set bond0 nomaster
 ip link set bond1 master bond0

Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04 12:05:56 -07:00
Cong Wang
1a33e10e4a net: partially revert dynamic lockdep key changes
This patch reverts the folowing commits:

commit 064ff66e2b
"bonding: add missing netdev_update_lockdep_key()"

commit 53d374979e
"net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()"

commit 1f26c0d3d2
"net: fix kernel-doc warning in <linux/netdevice.h>"

commit ab92d68fc2
"net: core: add generic lockdep keys"

but keeps the addr_list_lock_key because we still lock
addr_list_lock nestedly on stack devices, unlikely xmit_lock
this is safe because we don't take addr_list_lock on any fast
path.

Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04 12:05:56 -07:00