Allow building vringh without IOTLB (that's the case for userspace
builds, will be useful for CAIF/VOD down the road too).
Update for API tweaks.
Don't include vringh with userspace builds.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
Open access to monitoring of kernel code, CPUs, tracepoints and
namespaces data for a CAP_PERFMON privileged process. Providing the
access under CAP_PERFMON capability singly, without the rest of
CAP_SYS_ADMIN credentials, excludes chances to misuse the credentials
and makes operation more secure.
CAP_PERFMON implements the principle of least privilege for performance
monitoring and observability operations (POSIX IEEE 1003.1e 2.2.2.39
principle of least privilege: A security design principle that states
that a process or program be granted only those privileges (e.g.,
capabilities) necessary to accomplish its legitimate function, and only
for the time that such privileges are actually required)
For backward compatibility reasons the access to perf_events subsystem
remains open for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN
usage for secure perf_events monitoring is discouraged with respect to
CAP_PERFMON capability.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-man@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-doc@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/471acaef-bb8a-5ce2-923f-90606b78eef9@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce the CAP_PERFMON capability designed to secure system
performance monitoring and observability operations so that CAP_PERFMON
can assist CAP_SYS_ADMIN capability in its governing role for
performance monitoring and observability subsystems.
CAP_PERFMON hardens system security and integrity during performance
monitoring and observability operations by decreasing attack surface that
is available to a CAP_SYS_ADMIN privileged process [2]. Providing the access
to system performance monitoring and observability operations under CAP_PERFMON
capability singly, without the rest of CAP_SYS_ADMIN credentials, excludes
chances to misuse the credentials and makes the operation more secure.
Thus, CAP_PERFMON implements the principle of least privilege for
performance monitoring and observability operations (POSIX IEEE 1003.1e:
2.2.2.39 principle of least privilege: A security design principle that
states that a process or program be granted only those privileges
(e.g., capabilities) necessary to accomplish its legitimate function,
and only for the time that such privileges are actually required)
CAP_PERFMON meets the demand to secure system performance monitoring and
observability operations for adoption in security sensitive, restricted,
multiuser production environments (e.g. HPC clusters, cloud and virtual compute
environments), where root or CAP_SYS_ADMIN credentials are not available to
mass users of a system, and securely unblocks applicability and scalability
of system performance monitoring and observability operations beyond root
and CAP_SYS_ADMIN use cases.
CAP_PERFMON takes over CAP_SYS_ADMIN credentials related to system performance
monitoring and observability operations and balances amount of CAP_SYS_ADMIN
credentials following the recommendations in the capabilities man page [1]
for CAP_SYS_ADMIN: "Note: this capability is overloaded; see Notes to kernel
developers, below." For backward compatibility reasons access to system
performance monitoring and observability subsystems of the kernel remains
open for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN capability
usage for secure system performance monitoring and observability operations
is discouraged with respect to the designed CAP_PERFMON capability.
Although the software running under CAP_PERFMON can not ensure avoidance
of related hardware issues, the software can still mitigate these issues
following the official hardware issues mitigation procedure [2]. The bugs
in the software itself can be fixed following the standard kernel development
process [3] to maintain and harden security of system performance monitoring
and observability operations.
[1] http://man7.org/linux/man-pages/man7/capabilities.7.html
[2] https://www.kernel.org/doc/html/latest/process/embargoed-hardware-issues.html
[3] https://www.kernel.org/doc/html/latest/admin-guide/security-bugs.html
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-doc@vger.kernel.org
Cc: linux-man@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/5590d543-82c6-490a-6544-08e6a5517db0@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Platform data is a legacy interface to supply device properties
to the driver. In this case we even don't have in-kernel users
for it. Just remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200407173849.43628-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
i.MX8DXL contains a system controller that is responsible for controlling
the pad setting of the IPs that are present. Communication between the
host processor running an OS and the system controller happens through
a SCU protocol, add support for the SCU based i.MX8DXL pinctrl driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1585306559-13973-2-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Passing volatile-qualified pointers to the asm-generic implementations of
the load-acquire macros results in a re-load from the stack due to the
temporary result variable inheriting the volatile semantics thanks to the
use of 'typeof()'.
Define these temporary variables using 'unqual_scalar_typeof' to drop
the volatile qualifier in the case that they are scalar types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will@kernel.org>
Passing a volatile-qualified pointer to READ_ONCE() is an absolute
trainwreck for code generation: the use of 'typeof()' to define a
temporary variable inside the macro means that the final evaluation in
macro scope ends up forcing a read back from the stack. When stack
protector is enabled (the default for arm64, at least), this causes
the compiler to vomit up all sorts of junk.
Unfortunately, dropping pointer qualifiers inside the macro poses quite
a challenge, especially since the pointed-to type is permitted to be an
aggregate, and this is relied upon by mm/ code accessing things like
'pmd_t'. Based on numerous hacks and discussions on the mailing list,
this is the best I've managed to come up with.
Introduce '__unqual_scalar_typeof()' which takes an expression and, if
the expression is an optionally qualified 8, 16, 32 or 64-bit scalar
type, evaluates to the unqualified type. Other input types, including
aggregates, remain unchanged. Hopefully READ_ONCE() on volatile aggregate
pointers isn't something we do on a fast-path.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Will Deacon <will@kernel.org>
{READ,WRITE}_ONCE() cannot guarantee atomicity for arbitrary data sizes.
This can be surprising to callers that might incorrectly be expecting
atomicity for accesses to aggregate structures, although there are other
callers where tearing is actually permissable (e.g. if they are using
something akin to sequence locking to protect the access).
Linus sayeth:
| We could also look at being stricter for the normal READ/WRITE_ONCE(),
| and require that they are
|
| (a) regular integer types
|
| (b) fit in an atomic word
|
| We actually did (b) for a while, until we noticed that we do it on
| loff_t's etc and relaxed the rules. But maybe we could have a
| "non-atomic" version of READ/WRITE_ONCE() that is used for the
| questionable cases?
The slight snag is that we also have to support 64-bit accesses on 32-bit
architectures, as these appear to be widespread and tend to work out ok
if either the architecture supports atomic 64-bit accesses (x86, armv7)
or if the variable being accesses represents a virtual address and
therefore only requires 32-bit atomicity in practice.
Take a step in that direction by introducing a variant of
'compiletime_assert_atomic_type()' and use it to check the pointer
argument to {READ,WRITE}_ONCE(). Expose __{READ,WRITE}_ONCE() variants
which are allowed to tear and convert the one broken caller over to the
new macros.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will@kernel.org>
The implementations of {READ,WRITE}_ONCE() suffer from a significant
amount of indirection and complexity due to a historic GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145
which was originally worked around by 230fa253df ("kernel: Provide
READ_ONCE and ASSIGN_ONCE").
Since GCC 4.8 is fairly vintage at this point and we emit a warning if
we detect it during the build, return {READ,WRITE}_ONCE() to their former
glory with an implementation that is easier to understand and, crucially,
more amenable to optimisation. A side effect of this simplification is
that WRITE_ONCE() no longer returns a value, but nobody seems to be
relying on that and the new behaviour is aligned with smp_store_release().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Will Deacon <will@kernel.org>
When a vPE is made resident, the GIC starts parsing the virtual pending
table to deliver pending interrupts. This takes place asynchronously,
and can at times take a long while. Long enough that the vcpu enters
the guest and hits WFI before any interrupt has been signaled yet.
The vcpu then exits, blocks, and now gets a doorbell. Rince, repeat.
In order to avoid the above, a (optional on GICv4, mandatory on v4.1)
feature allows the GIC to feedback to the hypervisor whether it is
done parsing the VPT by clearing the GICR_VPENDBASER.Dirty bit.
The hypervisor can then wait until the GIC is ready before actually
running the vPE.
Plug the detection code as well as polling on vPE schedule. While
at it, tidy-up the kernel message that displays the GICv4 optional
features.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since commit a8ac900b81 ("ext4: use non-movable memory for the
superblock") buffers for ext4 superblock were allocated using
the sb_bread_unmovable() helper which allocated buffer heads
out of non-movable memory blocks. It was necessarily to not block
page migrations and do not cause cma allocation failures.
However commit 85c8f176a6 ("ext4: preload block group descriptors")
broke this by introducing pre-reading of the ext4 superblock.
The problem is that __breadahead() is using __getblk() underneath,
which allocates buffer heads out of movable memory.
It resulted in page migration failures I've seen on a machine
with an ext4 partition and a preallocated cma area.
Fix this by introducing sb_breadahead_unmovable() and
__breadahead_gfp() helpers which use non-movable memory for buffer
head allocations and use them for the ext4 superblock readahead.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 85c8f176a6 ("ext4: preload block group descriptors")
Signed-off-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Long series made of a relatively small changes from multiple SOF
contributors. I didn't find a good way to split this series since it
tracks SOF minor ABI changes (backwards-compatible with older firmware
files) and needs to be kept in-order. Future series should be much
shorter.
The main addition is support for an extended firmware manifest, which
helps retrieve capabilities directly from the firmware file instead of
the current IPC mechanism (still supported but will be deprecated).
The IPC is realigned with the firmware, along with type cleanups, and
the DMIC interface is simplified.
The topology changes are mainly about a multi-cpu DAI fix, a new DC
blocking component, better parsing of tuples and new parameters for
ALH (SoundWire) and HDaudio DAIs. New tokens are also added to clarify
the firmware behavior in the case of dependent pipelines, e.g. for
echo reference generation.
Artur Kloniecki (1):
ASoC: SOF: Add XRUN flags field to struct sof_ipc_buffer.
Bard Liao (5):
ASoC: SOF: topology: fix: handle DAI widget connections properly with
multiple CPU DAI's
ASoC: SOF: align sof_ipc_dai_alh_params with FW
ASoC: SOF: topology: Get ALH rate amd channels from topology
ASoC: SOF: topology: fix: parse hda_tokens to &config->hda
ASoC: SOF: topology: Get HDA rate and channels from topology
Jaska Uimonen (2):
ASoC: SOF: topology: stop parsing when all tokens have been found
ASoC: SOF: topology: handle multiple sets of tuple arrays
Karol Trzcinski (6):
ASoC: SOF: Mark get_ext* function ext_hdr arguments as const
ASoC: SOF: Introduce offset in firmware data
ASoC: SOF: Introduce extended manifest
ASoC: SOF: ext_manifest: parse firmware version
ASoC: SOF: ext_manifest: parse windows
ASoC: SOF: ext_manifest: parse compiler version
Pan Xiuli (6):
ASoC: SOF: add probe support extend data
ASoC: SOF: add debug ABI version
ASoC: SOF: change type char to uint8_t in info.h
ASoC: SOF: change type char to uint8_t in trace.h
ASoC: SOF: change type char to uint8_t in topology.h
ASoC: SOF: make sof_ipc_cc_version to fixed length
Sebastiano Carlucci (1):
ASoC: SOF: topology: Add support for DC Blocker
Seppo Ingalsuo (3):
ASoC: SOF: Intel: Fix typo in header file comment text
ASoC: SOF: Intel: Change DMIC load IPC to fixed length
ASoC: SOF: Intel: Rename deprecated DMIC IPC struct field
include/sound/sof.h | 3 +
include/sound/sof/dai-intel.h | 20 +-
include/sound/sof/info.h | 26 ++-
include/sound/sof/topology.h | 16 +-
include/sound/sof/trace.h | 2 +-
include/uapi/sound/sof/abi.h | 2 +-
include/uapi/sound/sof/ext_manifest.h | 91 ++++++++
include/uapi/sound/sof/tokens.h | 8 +
sound/soc/sof/intel/hda-loader.c | 9 +-
sound/soc/sof/loader.c | 226 ++++++++++++++++--
sound/soc/sof/topology.c | 323 ++++++++++++++++----------
11 files changed, 568 insertions(+), 158 deletions(-)
create mode 100644 include/uapi/sound/sof/ext_manifest.h
base-commit: 83b35f4586
--
2.20.1
Daniel Baluta <daniel.baluta@nxp.com>:
From: Daniel Baluta <daniel.baluta@nxp.com>
This patch series adds support for SOF on i.MX8M family. First board
from this family that has a DSP is i.MX8MP.
First 2 patches are trying to fix some compilation issues, the next two
are adding the imx8m support and the last one adds the devicetree
binding.
Changes since v2:
- add reviewed by from Rob to DT patch
- fix ownership for patch 2
Daniel Baluta (3):
ASoC: SOF: imx: Add i.MX8M HW support
ASoC: SOF: Add i.MX8MP device descriptor
dt-bindings: dsp: fsl: Add fsl,imx8mp-dsp entry
Pierre-Louis Bossart (1):
ASoC: SOF: imx: fix undefined reference issue
YueHaibing (1):
ASoC: SOF: imx8: Fix randbuild error
.../devicetree/bindings/dsp/fsl,dsp.yaml | 2 +
sound/soc/sof/imx/Kconfig | 32 +-
sound/soc/sof/imx/Makefile | 2 +
sound/soc/sof/imx/imx8m.c | 279 ++++++++++++++++++
sound/soc/sof/sof-of-dev.c | 14 +
5 files changed, 325 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/sof/imx/imx8m.c
--
2.17.1
FW interface for HDA DAI parameters was extended with information on
sampling rate and channel count in version 3.16. Align kernel header
with the FW change. This change is backwards compatible. Old firmware
will ignore the values.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW will need these params for synchronized playback over multiple
DAIs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Sławomir Błauciak <slawomir.blauciak@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Aligned with FW change. The rate and channel values are needed in
case of a connection with a demux for synchronize playback over
multiple ALH DAIs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Sławomir Błauciak <slawomir.blauciak@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch restores the field name to fifo_bits_b since the
legacy firmware compatibility code (for firmware ABI 3.0.0 or earlier)
sets it in sof_link_dmic_load() function in topology.c. Setting of
reserved_2 didn't look appropriate.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch changes the flexible array member pdm[] into a fixed
array of four that is the max. number of stereo PDM controllers
in the current Intel platforms. The change simplifies DMIC DAI
load code and aligns the IPC with other DAI types.
The change is compatible with old and new firmware with similar
change. The ABI minor version is increased due to change in
IPC headers.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the typo in word "microphone".
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if a component source buffer underruns or a component sink
buffer overruns the pipeline will enter an XRUN status and attempt
recovery. This is desired in most pipelines but some topologies need to
support use cases where we expect buffers to underrun or overrun.
Host ---> Proc----> Selector0 --> Buf0 ---- > DAI Playback
|
v
Buf1
|
v
Host <---------------Selector1 <----- Buf2 <----- Echo Ref DAI
In the example above we two host PCMs that can be independently
started/stopped thereby causing buf1 to either underrun or overrun
(and stop the pipelines). Buf1 should be permitted to underrun or overrun
without invoking pipeline XRUN logic and should over write oldest data
(for overrun) and readback 0s (for underrun).
2 flags have been added for use during buffer instantiation:
SOF_BUF_OVERRUN_PERMITTED and SOF_BUF_UNDERRUN_PERMITTED,
along with struct sof_ipc_buffer member fields: flags and reserved.
Flags field is supposed to hold the above-mentioned flags to allow
some control over XRUN behaviour.
Also added reserved field to the structure in case it comes in handy
some time in the future.
This is an incremental ABI change as the new fields are ignored by older
versions of the firmware.
Signed-off-by: Artur Kloniecki <arturx.kloniecki@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Align struct sof_ipc_cc_version to firmware definition in SOF ABI 3.15.0.
The struct definition was changed due to errors in FW build.
The Cadence XCC compiler produces incorrect linkage section sizes, when a
variable length array is used in the compiler version struct. The firmware
definition was changed to a fixed 32 byte compiler description string.
This length covers all released firmware binaries and thus only a minor
ABI change is needed.
As the same structure is used in IPC messages between driver and firmware,
the kernel needs to be aligned to firmware change.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use uint8_t to replace char in packed ABI structs
to have fixed length for struct.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use uint8_t to replace char in packed ABI structs
to have fixed length for struct.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use uint8_t to replace char in packed ABI structs
to have fixed length for struct.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new debug ABI version to be increased when changing user space debug
interfaces while the the main FW ABI is not affected.
The abi_dbg_version share same definition with SOF_ABI_VER
This change main ABI to 3.14.0
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Share how many injection probe DMAs and how many probe points
driver can request from FW.
injection_dmas_max 0 means injection is not supported
probe_points_max 0 means whole probes subsystem in FW is not enabled
and not compiled in.
ABI version change to 3.14.0
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds the enumerations to support the dc blocker component
from SOF.
Signed-off-by: Sebastiano Carlucci <scarlucci@google.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The compiler version and description can be extracted from the
extended manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The window description can be extracted from the extended manifest
content. This information known at build time does not need to be
provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware version can be extracted from the extended
manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extended manifest is a place to store build time known firmware
metadata, for example firmware version or used compiler description.
Given information is read on host side before firmware startup.
This part of output binary is located as a first structure in binary
file.
Extended manifest should be skipped in firmware loading routine.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes possible to provide extra information to host
before downloading firmware. Extra data should be put
at the beginning of firmware binary.
Exchange is done without any effort on DSP side.
This mechanism will be used in extended manifest.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Baytrail/Cherrytrail, the Atom/SST driver fails miserably:
[ 9.741953] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01
[ 9.832992] intel_sst_acpi 80860F28:00: FW sent error response 0x40034
[ 9.833019] intel_sst_acpi 80860F28:00: FW alloc failed ret -4
[ 9.833028] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5
[ 9.833033] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5
[ 9.833037] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed
[ 9.853942] intel_sst_acpi 80860F28:00: FW sent error response 0x40034
[ 9.853974] intel_sst_acpi 80860F28:00: FW alloc failed ret -4
[ 9.853984] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5
[ 9.853990] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5
[ 9.853994] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed
Commit b56be800f1 ("ASoC: soc-pcm: call
snd_soc_dai_startup()/shutdown() once") was the initial problematic
commit.
Commit 1ba616bd1a ("ASoC: soc-dai: fix DAI startup/shutdown sequence")
was an attempt to fix things but it does not work on Baytrail,
reverting all changes seems necessary for now.
Fixes: 1ba616bd1a ("ASoC: soc-dai: fix DAI startup/shutdown sequence")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200415030437.23803-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is very rare to see versions of GCC prior to 4.8 being used to build
the mainline kernel. These old compilers are also know to have codegen
issues which can lead to silent miscompilation:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145
Raise the minimum GCC version for kernel build to 4.8 and remove some
tautological Kconfig dependencies as a consequence.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
To rehash a previous explanation given in commit 1c44ce560b ("net:
mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is
up"), the switch driver operates the in a mode where a single VLAN can
be transmitted as untagged on a particular egress port. That is the
"native VLAN on trunk port" use case.
The configuration for this native VLAN is driven in 2 ways:
- Set the egress port rewriter to strip the VLAN tag for the native
VID (as it is egress-untagged, after all).
- Configure the ingress port to drop untagged and priority-tagged
traffic, if there is no native VLAN. The intention of this setting is
that a trunk port with no native VLAN should not accept untagged
traffic.
Since both of the above configurations for the native VLAN should only
be done if VLAN awareness is requested, they are actually done from the
ocelot_port_vlan_filtering function, after the basic procedure of
toggling the VLAN awareness flag of the port.
But there's a problem with that simplistic approach: we are trying to
juggle with 2 independent variables from a single function:
- Native VLAN of the port - its value is held in port->vid.
- VLAN awareness state of the port - currently there are some issues
here, more on that later*.
The actual problem can be seen when enslaving the switch ports to a VLAN
filtering bridge:
0. The driver configures a pvid of zero for each port, when in
standalone mode. While the bridge configures a default_pvid of 1 for
each port that gets added as a slave to it.
1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true.
The VLAN-filtering-dependent portion of the native VLAN
configuration is done, considering that the native VLAN is 0.
2. The bridge calls ocelot_vlan_add with vid=1, pvid=true,
untagged=true. The native VLAN changes to 1 (change which gets
propagated to hardware).
3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the
VLAN-filtering-dependent portion of the native VLAN configuration,
for the new native VLAN of 1. One can notice that after toggling "ip
link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0
type bridge vlan_filtering 1", the new native VLAN finally makes it
through and untagged traffic finally starts flowing again. But
obviously that shouldn't be needed.
So it is clear that 2 independent variables need to both re-trigger the
native VLAN configuration. So we introduce the second variable as
ocelot_port->vlan_aware.
*Actually both the DSA Felix driver and the Ocelot driver already had
each its own variable:
- Ocelot: ocelot_port_private->vlan_aware
- Felix: dsa_port->vlan_filtering
but the common Ocelot library needs to work with a single, common,
variable, so there is some refactoring done to move the vlan_aware
property from the private structure into the common ocelot_port
structure.
Fixes: 97bb69e1e3 ("net: mscc: ocelot: break apart ocelot_vlan_port_apply")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the controller is being reset or power cycled, then the flag
HCI_LL_RPA_RESOLUTION which indicates if controller based address
resolution is active needs to be also reset.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case LL Privacy is supported by the controller, it is also a good
idea to use the LE Enhanced Connection Complete event for getting all
information about the new connection and its addresses.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The list of LE features constants has gotten a bit confused. It lost the
order and gained duplicated. Clean this up.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All in-tree users have been converted to the new i2c_new_scanned_device
function, so remove this deprecated one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
saved_max_pfn was originally introduced in commit
92aa63a5a1 ("[PATCH] kdump: Retrieve saved max pfn")
It used to make sure that the user does not try to read the physical memory
beyond saved_max_pfn. But since commit
921d58c0e6 ("vmcore: remove saved_max_pfn check")
it's no longer used for the check. This variable doesn't have any users
anymore so just remove it.
[ bp: Drop the Calgary IOMMU reference from the commit message. ]
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20200330181544.1595733-1-kasong@redhat.com
The function is local to cma.c, so let's limit its scope.
Link: https://lore.kernel.org/r/20200413132323.930869-1-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl6ViNsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXuXIB/4nuYRCt4d/XaeHF6dCWU45ThG+tNs7
p/OnBPZmknI0SnZ4uR/XW5caHEFj7g9ndYh+M1afZ/zKdsc+syMSDT5XhuhC/GKV
fQRW0qO8N+IAqXbLzJxyBg6fH2anwfe3w2uy2cKDEZk6d4FD5atTWhRY6R4ISq0l
g7pUyvQN1q+G6KH2snmOaZL8mybFkbHrmwtAZzcjzdzqasdLFiQB8EEFkONG66t9
HeNTyUF0mnbGBIePQLSZSHLj5p4yHG/9pa3jgqO5dsmIdsBvoaVNqEi3pCm1s/5n
BH9FWn6fTwpcKvtF385yzBiFFlzBVgXbetxuSmxxOkWW4P+db5B/GL2Y
=fjSF
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- a series from Tianyu Lan to fix crash reporting on Hyper-V
- three miscellaneous cleanup patches
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/Hyper-V: Report crash data in die() when panic_on_oops is set
x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set
x86/Hyper-V: Report crash register data or kmsg before running crash kernel
x86/Hyper-V: Trigger crash enlightenment only once during system crash.
x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump
x86/Hyper-V: Unload vmbus channel in hv panic callback
x86: hyperv: report value of misc_features
hv_debugfs: Make hv_debug_root static
hv: hyperv_vmbus.h: Replace zero-length array with flexible-array member
-----BEGIN PGP SIGNATURE-----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=pkZ2
-----END PGP SIGNATURE-----
Merge tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few regressions and one fix for stable:
- revert fsync optimization
- fix lost i_size update
- fix a space accounting leak
- build fix, add back definition of a deprecated ioctl flag
- fix search condition for old roots in relocation"
* tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: re-instantiate the removed BTRFS_SUBVOL_CREATE_ASYNC definition
btrfs: fix reclaim counter leak of space_info objects
btrfs: make full fsyncs always operate on the entire file again
btrfs: fix lost i_size update after cloning inline extent
btrfs: check commit root generation in should_ignore_root
The Kontron sl28cpld is a board management chip providing gpio, pwm, fan
monitoring and an interrupt controller. For now this controller is used on
the Kontron SMARC-sAL28 board. But because of its flexible nature, it
might also be used on other boards in the future. The individual blocks
(like gpio, pwm, etc) are kept intentionally small. The MFD core driver
then instantiates different (or multiple of the same) blocks. It also
provides the register layout so it might be updated in the future without a
device tree change; and support other boards with a different layout or
functionalities.
See also [1] for more information.
This is my first take of a MFD driver. I don't know whether the subsystem
maintainers should only be CCed on the patches which affect the subsystem
or on all patches for this series. I've chosen the latter so you can get a
more complete picture.
[1] https://lore.kernel.org/linux-devicetree/0e3e8204ab992d75aa07fc36af7e4ab2@walle.cc/
Changes since v1:
- use of_match_table in all drivers, needed for automatic module loading,
when using OF_MFD_CELL()
- add new gpio-regmap.c which adds a generic regmap gpio_chip implemention
- new patch for reqmap_irq, so we can reuse its implementation
- remove almost any code from gpio-sl28cpld.c, instead use gpio-regmap and
regmap-irq
- change the handling of the mfd core vs device tree nodes; add a new
property "of_reg" to the mfd_cell struct which, when set, is matched to
the unit-address of the device tree nodes.
- fix sl28cpld watchdog when it is not initialized by the bootloader.
Explicitly set the operation mode.
- also add support for kontron,assert-wdt-timeout-pin in sl28cpld-wdt.
As suggested by Bartosz Golaszewski:
- define registers as hex
- make gpio enum uppercase
- move parent regmap check before memory allocation
- use device_property_read_bool() instead of the of_ version
- mention the gpio flavors in the bindings documentation
As suggested by Guenter Roeck:
- cleanup #includes and sort them
- use devm_watchdog_register_device()
- use watchdog_stop_on_reboot()
- provide a Documentation/hwmon/sl28cpld.rst
- cleaned up the weird tristate->bool and I2C=y issue. Instead mention
that the MFD driver is bool because of the following intc patch
- removed the SL28CPLD_IRQ typo
As suggested by Rob Herring:
- combine all dt bindings docs into one patch
- change the node name for all gpio flavors to "gpio"
- removed the interrupts-extended rule
- cleaned up the unit-address space, see above
Michael Walle (16):
include/linux/ioport.h: add helper to define REG resource constructs
mfd: mfd-core: Don't overwrite the dma_mask of the child device
mfd: mfd-core: match device tree node against reg property
regmap-irq: make it possible to add irq_chip do a specific device node
dt-bindings: mfd: Add bindings for sl28cpld
mfd: Add support for Kontron sl28cpld management controller
irqchip: add sl28cpld interrupt controller support
watchdog: add support for sl28cpld watchdog
pwm: add support for sl28cpld PWM controller
gpio: add a reusable generic gpio_chip using regmap
gpio: add support for the sl28cpld GPIO controller
hwmon: add support for the sl28cpld hardware monitoring controller
arm64: dts: freescale: sl28: enable sl28cpld
arm64: dts: freescale: sl28: map GPIOs to input events
arm64: dts: freescale: sl28: enable LED support
arm64: dts: freescale: sl28: enable fan support
.../bindings/gpio/kontron,sl28cpld-gpio.yaml | 51 +++
.../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++
.../bindings/mfd/kontron,sl28cpld.yaml | 162 +++++++++
.../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++
.../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++
Documentation/hwmon/sl28cpld.rst | 36 ++
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 14 +
.../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +
.../freescale/fsl-ls1028a-kontron-sl28.dts | 124 +++++++
drivers/base/regmap/regmap-irq.c | 84 ++++-
drivers/gpio/Kconfig | 15 +
drivers/gpio/Makefile | 2 +
drivers/gpio/gpio-regmap.c | 321 ++++++++++++++++++
drivers/gpio/gpio-sl28cpld.c | 187 ++++++++++
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/sl28cpld-hwmon.c | 152 +++++++++
drivers/irqchip/Kconfig | 3 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-sl28cpld.c | 99 ++++++
drivers/mfd/Kconfig | 21 ++
drivers/mfd/Makefile | 2 +
drivers/mfd/mfd-core.c | 31 +-
drivers/mfd/sl28cpld.c | 154 +++++++++
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-sl28cpld.c | 204 +++++++++++
drivers/watchdog/Kconfig | 11 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/sl28cpld_wdt.c | 242 +++++++++++++
include/linux/gpio-regmap.h | 88 +++++
include/linux/ioport.h | 5 +
include/linux/mfd/core.h | 26 +-
include/linux/regmap.h | 10 +
34 files changed, 2142 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
create mode 100644 Documentation/hwmon/sl28cpld.rst
create mode 100644 drivers/gpio/gpio-regmap.c
create mode 100644 drivers/gpio/gpio-sl28cpld.c
create mode 100644 drivers/hwmon/sl28cpld-hwmon.c
create mode 100644 drivers/irqchip/irq-sl28cpld.c
create mode 100644 drivers/mfd/sl28cpld.c
create mode 100644 drivers/pwm/pwm-sl28cpld.c
create mode 100644 drivers/watchdog/sl28cpld_wdt.c
create mode 100644 include/linux/gpio-regmap.h
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel