Commit graph

121,030 commits

Author SHA1 Message Date
Michael Guralnik
24670b1a31 net/mlx5: Add support for RDMA TX steering
Add new RDMA TX flow steering namespace. Flow steering rules in
this namespace are used to filter transmitted RDMA traffic.

Link: https://lore.kernel.org/r/20200324061425.1570190-2-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-27 13:24:48 -03:00
Christoph Hellwig
3d745ea5b0 block: simplify queue allocation
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper.  Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter.  A lower-level __blk_alloc_queue is kept for the blk-mq case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27 10:23:43 -06:00
Christoph Hellwig
2f227bb999 block: add a blk_mq_init_queue_data helper
This allows a driver to pass a queuedata member before ->init_hctx is
called.  null_blk currently open codes this logic, but I'd rather have
it in the core to ease future maintainance.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27 10:23:43 -06:00
J. Bruce Fields
9a81ef42b2 SUNRPC/cache: don't allow invalid entries to be flushed
Trond points out in commit 277f27e2f2 ("SUNRPC/cache: Allow
garbage collection of invalid cache entries") that we allow invalid
cache entries to persist indefinitely. That fix, however,
reintroduces the problem fixed by Kinglong Mee's commit d6fc8821c2
("SUNRPC/Cache: Always treat the invalid cache as unexpired"), where
an invalid cache entry is immediately removed by a flush before
mountd responds to it. The result is that the server thread that
should be waiting for mountd to fill in that entry instead gets an
-ETIMEDOUT return from cache_check(). Symptoms are the server
becoming unresponsive after a restart, reproduceable by running
pynfs 4.1 test REBT5.

Instead, take a compromise approach: allow invalid cache entries to
be removed after they expire, but not to be removed by a cache
flush.

Fixes: 277f27e2f2 ("SUNRPC/cache: Allow garbage collection ... ")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-27 12:17:31 -04:00
Yishai Hadas
0a2fd01c28 IB/mlx5: Move to fully dynamic UAR mode once user space supports it
Move to fully dynamic UAR mode once user space supports it.  In this case
we prevent any legacy mode of UARs on the allocated context and prevent
redundant allocation of the static ones.

Link: https://lore.kernel.org/r/20200324060143.1569116-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-27 12:59:05 -03:00
Leon Romanovsky
2152862298 IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib
struct mlx5_bfreg_info is used by mlx5_ib only but is exposed to both RDMA
and netdev parts of mlx5 driver. Move that struct to mlx5_ib namespace,
clean vertical space alignment and convert lib_uar_4k from bool to
bitfield.

Link: https://lore.kernel.org/r/20200324060143.1569116-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-27 12:59:04 -03:00
Yishai Hadas
ac42a5ee92 IB/mlx5: Extend QP creation to get uar page index from user space
Extend QP creation to get uar page index from user space, this mode can be
used with the UAR dynamic mode APIs to allocate/destroy a UAR object.

As part of enabling this option blocked the weird/un-supported cross
channel option which uses index 0 hard-coded.

This QP flag wasn't exposed to user space as part of any formal upstream
release, the dynamic option can allow having valid UAR page index instead.

Link: https://lore.kernel.org/r/20200324060143.1569116-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-27 12:59:04 -03:00
Yishai Hadas
64d99f6a62 IB/mlx5: Extend CQ creation to get uar page index from user space
Extend CQ creation to get uar page index from user space, this mode can be
used with the UAR dynamic mode APIs to allocate/destroy a UAR object.

Link: https://lore.kernel.org/r/20200324060143.1569116-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-27 12:59:04 -03:00
Yishai Hadas
342ee59de9 IB/mlx5: Expose UAR object and its alloc/destroy commands
Expose UAR object and its alloc/destroy commands to be used over the ioctl
interface by user space applications.

This API supports both BF & NC modes and enables a dynamic allocation of
UARs once really needed.

As the number of driver objects were limited by the core ones when the
merged tree is prepared, had to decrease the number of core objects to
enable the new UAR object usage.

Link: https://lore.kernel.org/r/20200324060143.1569116-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-27 12:59:04 -03:00
Mark Brown
1ba0b52ea7
Merge branch 'spi-5.7' into spi-next 2020-03-27 15:53:00 +00:00
Christoph Hellwig
348e114bbd block: move the ->devnode callback to struct block_device_operations
There really isn't any good reason to stash a method directly into
struct gendisk.  Move it together with the other block device
operations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27 09:50:05 -06:00
Mark Brown
a23d7f4a7c
Merge series "ASoC: remove rtd->cpu/codec_dai{s}" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark

Now, CPU/Codec DAI(s) were replaced by rtd->dais.
Thus, We don't need rtd->cpu/codec_dai{s} anymore.
This pathset replaces it by new macro.

Kuninori Morimoto (36):
  ASoC: soc-core: add asoc_rtd_to_cpu/codec() macro
  ASoC: amd: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: atmel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: au1x: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: bcm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: cirrus: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: dwc: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: fsl: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: generic: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: img: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: kirkwood: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: mediatek: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: meson: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: mxs: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: pxa: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: qcom: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: rockchip: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: samsung: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: sh: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: sof: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: sprd: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: stm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: sunxi: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: tegra: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: ti: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: txx9: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: uniphier: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: ux500: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: xtensa: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: arm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: codecs: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: soc: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
  ASoC: soc-core: set rtd->num_cpu/codec at soc_new_pcm_runtime()
  ASoC: soc-core: tidyup soc_new_pcm_runtime() rtd setups
  ASoC: soc-core: remove cpu_dai/codec_dai/cpu_dais/codec_dais

 include/sound/soc.h                           | 30 +++++++------
 sound/arm/pxa2xx-pcm-lib.c                    |  8 ++--
 sound/soc/amd/acp-da7219-max98357a.c          |  2 +-
 sound/soc/amd/acp-rt5645.c                    |  4 +-
 sound/soc/amd/acp3x-rt5682-max9836.c          |  6 +--
 sound/soc/atmel/atmel-pcm-dma.c               |  4 +-
 sound/soc/atmel/atmel-pcm-pdc.c               |  2 +-
 sound/soc/atmel/atmel_wm8904.c                |  2 +-
 sound/soc/atmel/mikroe-proto.c                |  2 +-
 sound/soc/atmel/sam9g20_wm8731.c              |  2 +-
 sound/soc/atmel/sam9x5_wm8731.c               |  2 +-
 sound/soc/au1x/db1200.c                       |  2 +-
 sound/soc/au1x/dbdma2.c                       |  2 +-
 sound/soc/au1x/dma.c                          |  2 +-
 sound/soc/au1x/psc-ac97.c                     |  2 +-
 sound/soc/bcm/bcm63xx-pcm-whistler.c          | 16 +++----
 sound/soc/bcm/cygnus-pcm.c                    | 22 +++++-----
 sound/soc/cirrus/edb93xx.c                    |  4 +-
 sound/soc/cirrus/snappercl15.c                |  4 +-
 sound/soc/codecs/cs47l15.c                    |  4 +-
 sound/soc/codecs/cs47l24.c                    |  6 +--
 sound/soc/codecs/cs47l35.c                    |  6 +--
 sound/soc/codecs/cs47l85.c                    |  6 +--
 sound/soc/codecs/cs47l90.c                    |  6 +--
 sound/soc/codecs/cs47l92.c                    |  4 +-
 sound/soc/codecs/wm5110.c                     |  6 +--
 sound/soc/codecs/wm_adsp.c                    | 10 ++---
 sound/soc/dwc/dwc-pcm.c                       |  2 +-
 sound/soc/fsl/eukrea-tlv320.c                 |  4 +-
 sound/soc/fsl/fsl-asoc-card.c                 | 10 ++---
 sound/soc/fsl/fsl_asrc_dma.c                  |  6 +--
 sound/soc/fsl/fsl_spdif.c                     | 10 ++---
 sound/soc/fsl/fsl_ssi.c                       |  8 ++--
 sound/soc/fsl/imx-audmix.c                    |  8 ++--
 sound/soc/fsl/imx-mc13783.c                   |  4 +-
 sound/soc/fsl/imx-sgtl5000.c                  |  2 +-
 sound/soc/fsl/mpc5200_dma.c                   | 10 ++---
 sound/soc/fsl/mpc5200_psc_i2s.c               |  2 +-
 sound/soc/fsl/mpc8610_hpcd.c                  |  4 +-
 sound/soc/fsl/mx27vis-aic32x4.c               |  4 +-
 sound/soc/fsl/p1022_ds.c                      |  4 +-
 sound/soc/fsl/p1022_rdk.c                     |  4 +-
 sound/soc/fsl/wm1133-ev1.c                    |  6 +--
 sound/soc/generic/simple-card-utils.c         | 12 +++---
 sound/soc/img/img-i2s-in.c                    |  2 +-
 sound/soc/img/img-i2s-out.c                   |  2 +-
 sound/soc/intel/atom/sst-mfld-platform-pcm.c  |  6 +--
 sound/soc/intel/boards/bdw-rt5650.c           |  6 +--
 sound/soc/intel/boards/bdw-rt5677.c           |  6 +--
 sound/soc/intel/boards/broadwell.c            |  4 +-
 sound/soc/intel/boards/bxt_da7219_max98357a.c |  8 ++--
 sound/soc/intel/boards/bxt_rt298.c            |  8 ++--
 sound/soc/intel/boards/byt-max98090.c         |  2 +-
 sound/soc/intel/boards/byt-rt5640.c           |  4 +-
 sound/soc/intel/boards/bytcht_cx2072x.c       | 10 ++---
 sound/soc/intel/boards/bytcht_da7213.c        |  8 ++--
 sound/soc/intel/boards/bytcht_es8316.c        |  8 ++--
 sound/soc/intel/boards/bytcht_nocodec.c       |  4 +-
 sound/soc/intel/boards/bytcr_rt5640.c         |  8 ++--
 sound/soc/intel/boards/bytcr_rt5651.c         |  8 ++--
 sound/soc/intel/boards/cht_bsw_max98090_ti.c  |  6 +--
 sound/soc/intel/boards/cht_bsw_nau8824.c      |  4 +-
 sound/soc/intel/boards/cht_bsw_rt5645.c       | 14 +++----
 sound/soc/intel/boards/cht_bsw_rt5672.c       |  8 ++--
 sound/soc/intel/boards/cml_rt1011_rt5682.c    |  6 +--
 sound/soc/intel/boards/glk_rt5682_max98357a.c | 10 ++---
 sound/soc/intel/boards/haswell.c              |  2 +-
 sound/soc/intel/boards/kbl_da7219_max98357a.c |  8 ++--
 sound/soc/intel/boards/kbl_da7219_max98927.c  |  6 +--
 sound/soc/intel/boards/kbl_rt5660.c           |  6 +--
 sound/soc/intel/boards/kbl_rt5663_max98927.c  |  8 ++--
 .../intel/boards/kbl_rt5663_rt5514_max98927.c |  8 ++--
 .../soc/intel/boards/skl_nau88l25_max98357a.c | 12 +++---
 sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 16 +++----
 sound/soc/intel/boards/skl_rt286.c            |  8 ++--
 sound/soc/intel/boards/sof_da7219_max98373.c  |  8 ++--
 sound/soc/intel/boards/sof_pcm512x.c          |  8 ++--
 sound/soc/intel/boards/sof_rt5682.c           |  6 +--
 sound/soc/intel/haswell/sst-haswell-pcm.c     | 26 ++++++------
 sound/soc/intel/skylake/skl-pcm.c             | 10 ++---
 sound/soc/kirkwood/armada-370-db.c            |  2 +-
 sound/soc/kirkwood/kirkwood-dma.c             |  2 +-
 sound/soc/mediatek/common/mtk-afe-fe-dai.c    | 10 ++---
 .../mediatek/common/mtk-afe-platform-driver.c |  2 +-
 sound/soc/mediatek/mt2701/mt2701-afe-pcm.c    |  2 +-
 sound/soc/mediatek/mt2701/mt2701-cs42448.c    |  4 +-
 sound/soc/mediatek/mt2701/mt2701-wm8960.c     |  4 +-
 sound/soc/mediatek/mt6797/mt6797-afe-pcm.c    |  2 +-
 sound/soc/mediatek/mt8173/mt8173-afe-pcm.c    |  2 +-
 sound/soc/mediatek/mt8173/mt8173-max98090.c   |  4 +-
 .../mediatek/mt8173/mt8173-rt5650-rt5514.c    |  2 +-
 .../mediatek/mt8173/mt8173-rt5650-rt5676.c    |  4 +-
 sound/soc/mediatek/mt8173/mt8173-rt5650.c     |  6 +--
 sound/soc/mediatek/mt8183/mt8183-afe-pcm.c    |  2 +-
 .../mediatek/mt8183/mt8183-da7219-max98357.c  |  4 +-
 .../mt8183/mt8183-mt6358-ts3a227-max98357.c   |  2 +-
 sound/soc/meson/aiu-fifo.c                    |  2 +-
 sound/soc/meson/axg-card.c                    |  8 ++--
 sound/soc/meson/axg-fifo.c                    |  2 +-
 sound/soc/meson/meson-card-utils.c            |  2 +-
 sound/soc/mxs/mxs-sgtl5000.c                  |  4 +-
 sound/soc/pxa/brownstone.c                    |  4 +-
 sound/soc/pxa/corgi.c                         |  4 +-
 sound/soc/pxa/hx4700.c                        |  4 +-
 sound/soc/pxa/imote2.c                        |  4 +-
 sound/soc/pxa/magician.c                      |  8 ++--
 sound/soc/pxa/mioa701_wm9713.c                |  4 +-
 sound/soc/pxa/mmp-pcm.c                       |  2 +-
 sound/soc/pxa/mmp-sspa.c                      |  2 +-
 sound/soc/pxa/poodle.c                        |  4 +-
 sound/soc/pxa/pxa2xx-i2s.c                    |  2 +-
 sound/soc/pxa/spitz.c                         |  4 +-
 sound/soc/pxa/ttc-dkb.c                       |  2 +-
 sound/soc/pxa/z2.c                            |  4 +-
 sound/soc/pxa/zylonite.c                      |  6 +--
 sound/soc/qcom/apq8016_sbc.c                  |  2 +-
 sound/soc/qcom/apq8096.c                      |  6 +--
 sound/soc/qcom/lpass-platform.c               |  2 +-
 sound/soc/qcom/qdsp6/q6asm-dai.c              |  4 +-
 sound/soc/qcom/qdsp6/q6routing.c              |  2 +-
 sound/soc/qcom/sdm845.c                       | 22 +++++-----
 sound/soc/qcom/storm.c                        |  2 +-
 sound/soc/rockchip/rk3288_hdmi_analog.c       |  4 +-
 sound/soc/rockchip/rk3399_gru_sound.c         | 16 +++----
 sound/soc/rockchip/rockchip_max98090.c        |  6 +--
 sound/soc/rockchip/rockchip_rt5645.c          |  6 +--
 sound/soc/samsung/arndale.c                   |  6 +--
 sound/soc/samsung/bells.c                     | 16 +++----
 sound/soc/samsung/h1940_uda1380.c             |  2 +-
 sound/soc/samsung/i2s.c                       |  2 +-
 sound/soc/samsung/jive_wm8750.c               |  4 +-
 sound/soc/samsung/littlemill.c                | 14 +++----
 sound/soc/samsung/lowland.c                   |  4 +-
 sound/soc/samsung/neo1973_wm8753.c            | 10 ++---
 sound/soc/samsung/odroid.c                    |  2 +-
 sound/soc/samsung/pcm.c                       |  4 +-
 sound/soc/samsung/rx1950_uda1380.c            |  2 +-
 sound/soc/samsung/s3c-i2s-v2.c                |  2 +-
 sound/soc/samsung/s3c24xx_simtec.c            |  4 +-
 sound/soc/samsung/s3c24xx_uda134x.c           |  6 +--
 sound/soc/samsung/smartq_wm8987.c             |  4 +-
 sound/soc/samsung/smdk_spdif.c                |  2 +-
 sound/soc/samsung/smdk_wm8580.c               |  2 +-
 sound/soc/samsung/smdk_wm8994.c               |  2 +-
 sound/soc/samsung/smdk_wm8994pcm.c            |  4 +-
 sound/soc/samsung/snow.c                      |  4 +-
 sound/soc/samsung/spdif.c                     |  8 ++--
 sound/soc/samsung/speyside.c                  |  8 ++--
 sound/soc/samsung/tm2_wm5110.c                | 16 +++----
 sound/soc/samsung/tobermory.c                 |  8 ++--
 sound/soc/sh/dma-sh7760.c                     | 16 +++----
 sound/soc/sh/fsi.c                            |  2 +-
 sound/soc/sh/migor.c                          |  6 +--
 sound/soc/sh/rcar/core.c                      |  2 +-
 sound/soc/soc-compress.c                      | 36 ++++++++--------
 sound/soc/soc-core.c                          | 42 +++++++------------
 sound/soc/soc-dapm.c                          |  4 +-
 sound/soc/soc-generic-dmaengine-pcm.c         |  6 +--
 sound/soc/soc-pcm.c                           | 30 ++++++-------
 sound/soc/sof/intel/hda-dai.c                 |  6 +--
 sound/soc/sof/intel/hda-dsp.c                 |  2 +-
 sound/soc/sprd/sprd-pcm-compress.c            |  4 +-
 sound/soc/sprd/sprd-pcm-dma.c                 |  2 +-
 sound/soc/stm/stm32_adfsdm.c                  | 12 +++---
 sound/soc/stm/stm32_sai_sub.c                 |  2 +-
 sound/soc/sunxi/sun4i-spdif.c                 |  2 +-
 sound/soc/tegra/tegra_alc5632.c               |  2 +-
 sound/soc/tegra/tegra_max98090.c              |  2 +-
 sound/soc/tegra/tegra_rt5640.c                |  2 +-
 sound/soc/tegra/tegra_rt5677.c                |  2 +-
 sound/soc/tegra/tegra_sgtl5000.c              |  2 +-
 sound/soc/tegra/tegra_wm8753.c                |  2 +-
 sound/soc/tegra/tegra_wm8903.c                |  6 +--
 sound/soc/tegra/trimslice.c                   |  2 +-
 sound/soc/ti/ams-delta.c                      |  4 +-
 sound/soc/ti/davinci-evm.c                    |  4 +-
 sound/soc/ti/davinci-vcif.c                   |  4 +-
 sound/soc/ti/n810.c                           |  2 +-
 sound/soc/ti/omap-abe-twl6040.c               |  6 +--
 sound/soc/ti/omap-mcbsp-st.c                  |  2 +-
 sound/soc/ti/omap-mcbsp.c                     |  4 +-
 sound/soc/ti/omap-mcpdm.c                     |  2 +-
 sound/soc/ti/omap3pandora.c                   |  4 +-
 sound/soc/ti/osk5912.c                        |  2 +-
 sound/soc/ti/rx51.c                           |  2 +-
 sound/soc/txx9/txx9aclc.c                     |  2 +-
 sound/soc/uniphier/aio-compress.c             | 22 +++++-----
 sound/soc/uniphier/aio-dma.c                  |  6 +--
 sound/soc/ux500/mop500_ab8500.c               |  6 +--
 sound/soc/ux500/ux500_pcm.c                   |  8 ++--
 sound/soc/xtensa/xtfpga-i2s.c                 |  2 +-
 191 files changed, 573 insertions(+), 577 deletions(-)

--
2.17.1
2020-03-27 15:33:10 +00:00
Pierre-Louis Bossart
f8e2501880
ASoC: SOF: IPC: dai-intel: move ALH declarations in header file
ALH was inserted in the wrong place during integration, add after DMIC
to mirror the file used by SOF firmware.

No functional change, just text move in the same file to better track
changes, if any.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27 15:16:30 +00:00
Pierre-Louis Bossart
004bd41631
ASoC: soc-acpi: expand description of _ADR-based devices
For SoundWire, we need to know if endpoints needs to be 'aggregated'
(MIPI parlance, meaning logically grouped), e.g. when two speaker
amplifiers need to be handled as a single logical output.

We don't necessarily have the information at the firmware (BIOS)
level, so add a notion of endpoints and specify if a device/endpoint
is part of a group, with a position.

This may be expanded in future solutions, for now only provide a group
and position information.

Since we modify the header file, change all existing upstream tables
as well to avoid breaking compilation/bisect.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27 15:16:28 +00:00
Chuck Lever
e28ce90083 xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt
Change the rpcrdma_xprt_disconnect() function so that it no longer
waits for the DISCONNECTED event.  This prevents blocking if the
remote is unresponsive.

In rpcrdma_xprt_disconnect(), the transport's rpcrdma_ep is
detached. Upon return from rpcrdma_xprt_disconnect(), the transport
(r_xprt) is ready immediately for a new connection.

The RDMA_CM_DEVICE_REMOVAL and RDMA_CM_DISCONNECTED events are now
handled almost identically.

However, because the lifetimes of rpcrdma_xprt structures and
rpcrdma_ep structures are now independent, creating an rpcrdma_ep
needs to take a module ref count. The ep now owns most of the
hardware resources for a transport.

Also, a kref is needed to ensure that rpcrdma_ep sticks around
long enough for the cm_event_handler to finish.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-03-27 10:47:25 -04:00
Chuck Lever
745b734c9b xprtrdma: Extract sockaddr from struct rdma_cm_id
rpcrdma_cm_event_handler() is always passed an @id pointer that is
valid. However, in a subsequent patch, we won't be able to extract
an r_xprt in every case. So instead of using the r_xprt's
presentation address strings, extract them from struct rdma_cm_id.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-03-27 10:47:25 -04:00
Chuck Lever
93aa8e0a9d xprtrdma: Merge struct rpcrdma_ia into struct rpcrdma_ep
I eventually want to allocate rpcrdma_ep separately from struct
rpcrdma_xprt so that on occasion there can be more than one ep per
xprt.

The new struct rpcrdma_ep will contain all the fields currently in
rpcrdma_ia and in rpcrdma_ep. This is all the device and CM settings
for the connection, in addition to per-connection settings
negotiated with the remote.

Take this opportunity to rename the existing ep fields from rep_* to
re_* to disambiguate these from struct rpcrdma_rep.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-03-27 10:47:25 -04:00
Chuck Lever
d6ccebf956 xprtrdma: Disconnect on flushed completion
Completion errors after a disconnect often occur much sooner than a
CM_DISCONNECT event. Use this to try to detect connection loss more
quickly.

Note that other kernel ULPs do take care to disconnect explicitly
when a WR is flushed.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-03-27 10:47:25 -04:00
Chuck Lever
81fe0c57f4 xprtrdma: Invoke rpcrdma_ia_open in the connect worker
Move rdma_cm_id creation into rpcrdma_ep_create() so that it is now
responsible for allocating all per-connection hardware resources.

With this clean-up, all three arms of the switch statement in
rpcrdma_ep_connect are exactly the same now, thus the switch can be
removed.

Because device removal behaves a little differently than
disconnection, there is a little more work to be done before
rpcrdma_ep_destroy() can release the connection's rdma_cm_id. So
it is not quite symmetrical with rpcrdma_ep_create() yet.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-03-27 10:47:24 -04:00
Chuck Lever
62a89501a3 xprtrdma: Enhance MR-related trace points
Two changes:
- Show the number of SG entries that were mapped. This helps debug
  DMA-related problems.
- Record the MR's resource ID instead of its memory address. This
  groups each MR with its associated rdma-tool output, and reduces
  needless exposure of memory addresses.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-03-27 10:47:24 -04:00
Kuninori Morimoto
2af69581e1
ASoC: soc-core: add asoc_rtd_to_cpu/codec() macro
Now, snd_soc_pcm_runtime supports multi cpu_dai/codec_dai.
It still has cpu_dai/codec_dai for single DAI,
and has cpu_dais/codec_dais for multi DAIs.

	dais  = [][][][][][][][][][][][][][][][][][]
		^cpu_dais         ^codec_dais
		|--- num_cpus ---|--- num_codecs --|

	/* for multi DAIs */
	rtd->cpu_dais   = &rtd->dais[0];
	rtd->codec_dais = &rtd->dais[dai_link->num_cpus];

	/* for single DAI */
	rtd->cpu_dai    = rtd->cpu_dais[0];
	rtd->codec_dai	= rtd->codec_dais[0];

But, these can be replaced by dais.
This patch adds asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/875zevk5va.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-27 14:44:29 +00:00
Namhyung Kim
6546b19f95 perf/core: Add PERF_SAMPLE_CGROUP feature
The PERF_SAMPLE_CGROUP bit is to save (perf_event) cgroup information in
the sample.  It will add a 64-bit id to identify current cgroup and it's
the file handle in the cgroup file system.  Userspace should use this
information with PERF_RECORD_CGROUP event to match which cgroup it
belongs.

I put it before PERF_SAMPLE_AUX for simplicity since it just needs a
64-bit word.  But if we want bigger samples, I can work on that
direction too.

Committer testing:

  $ pahole perf_sample_data | grep -w cgroup -B5 -A5
  	/* --- cacheline 4 boundary (256 bytes) was 56 bytes ago --- */
  	struct perf_regs           regs_intr;            /*   312    16 */
  	/* --- cacheline 5 boundary (320 bytes) was 8 bytes ago --- */
  	u64                        stack_user_size;      /*   328     8 */
  	u64                        phys_addr;            /*   336     8 */
  	u64                        cgroup;               /*   344     8 */

  	/* size: 384, cachelines: 6, members: 22 */
  	/* padding: 32 */
  };
  $

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-27 10:41:44 -03:00
Namhyung Kim
96aaab6865 perf/core: Add PERF_RECORD_CGROUP event
To support cgroup tracking, add CGROUP event to save a link between
cgroup path and id number.  This is needed since cgroups can go away
when userspace tries to read the cgroup info (from the id) later.

The attr.cgroup bit was also added to enable cgroup tracking from
userspace.

This event will be generated when a new cgroup becomes active.
Userspace might need to synthesize those events for existing cgroups.

Committer testing:

From the resulting kernel, using /sys/kernel/btf/vmlinux:

  $ pahole perf_event_attr | grep -w cgroup -B5 -A1
  	__u64                      write_backward:1;     /*    40:27  8 */
  	__u64                      namespaces:1;         /*    40:28  8 */
  	__u64                      ksymbol:1;            /*    40:29  8 */
  	__u64                      bpf_event:1;          /*    40:30  8 */
  	__u64                      aux_output:1;         /*    40:31  8 */
  	__u64                      cgroup:1;             /*    40:32  8 */
  	__u64                      __reserved_1:31;      /*    40:33  8 */
  $

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
[staticize perf_event_cgroup function]
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-27 10:39:11 -03:00
Arnd Bergmann
021249ec6f Merge tag 'tee-cleanup-for-5.7' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Cleanup shared memory handing in TEE subsystem
The highlights are:
- Removing redundant or unused fields in struct tee_shm
- Only assign userspace shm IDs for shared memory objects originating from
  user space

* tag 'tee-cleanup-for-5.7' of https://git.linaro.org/people/jens.wiklander/linux-tee:
  tee: tee_shm_op_mmap(): use TEE_SHM_USER_MAPPED
  tee: remove redundant teedev in struct tee_shm
  tee: don't assign shm id for private shms
  tee: remove unused tee_shm_priv_alloc()
  tee: remove linked list of struct tee_shm

Link: https://lore.kernel.org/r/20200228140925.GA12393@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-27 14:26:14 +01:00
Arnd Bergmann
3a3052f1fc Merge tag 'soc-fsl-next-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.7

DPAA2 DPIO driver performance optimization
- Add and use QMAN multiple enqueue interface
- Use function pointer indirection to replace checks in hotpath

QUICC Engine drivers
- Fix sparse warnings and exposed endian issues

* tag 'soc-fsl-next-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qe: fix sparse warnings for ucc_slow.c
  soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
  soc: fsl: qe: fix sparse warnings for ucc_fast.c
  soc: fsl: qe: fix sparse warnings for qe_ic.c
  soc: fsl: qe: fix sparse warnings for ucc.c
  soc: fsl: qe: fix sparse warning for qe_common.c
  soc: fsl: qe: fix sparse warnings for qe.c
  soc: fsl: dpio: fix dereference of pointer p before null check
  soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue
  soc: fsl: dpio: QMAN performance improvement with function pointer indirection
  soc: fsl: dpio: Adding QMAN multiple enqueue interface

Link: https://lore.kernel.org/r/20200326001257.22696-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-27 14:26:14 +01:00
Lionel Landwerlin
4ef10fe05b drm/i915/perf: add new open param to configure polling of OA buffer
This new parameter let's the application choose how often the OA
buffer should be checked on the CPU side for data availability. Longer
polling period tend to reduce CPU overhead if the application does not
care about somewhat real time data collection.

v2: Allow disabling polling completely with 0 value (Lionel)
v3: Version the new parameter (Joonas)
v4: Rebase (Umesh)
v5: Make poll delay value of 0 invalid (Umesh)
v6:
- Describe poll_oa_period (Ashutosh)
- Fix comment for new poll parameter (Lionel)
- Drop open_flags in read_properties_unlocked (Lionel)
- Rename uapi parameter (Ashutosh)
v7: Reword the comment in uapi (Ashutosh)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324185457.14635-4-umesh.nerlige.ramappa@intel.com
2020-03-27 13:10:05 +02:00
H.J. Lu
84d5f77fc2 x86, vmlinux.lds: Add RUNTIME_DISCARD_EXIT to generic DISCARDS
In the x86 kernel, .exit.text and .exit.data sections are discarded at
runtime, not by the linker. Add RUNTIME_DISCARD_EXIT to generic DISCARDS
and define it in the x86 kernel linker script to keep them.

The sections are added before the DISCARD directive so document here
only the situation explicitly as this change doesn't have any effect on
the generated kernel. Also, other architectures like ARM64 will use it
too so generalize the approach with the RUNTIME_DISCARD_EXIT define.

 [ bp: Massage and extend commit message. ]

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200326193021.255002-1-hjl.tools@gmail.com
2020-03-27 11:52:11 +01:00
Joerg Roedel
ff68eb2330 Merge branches 'iommu/fixes', 'arm/qcom', 'arm/omap', 'arm/smmu', 'x86/amd', 'x86/vt-d', 'virtio' and 'core' into next 2020-03-27 11:33:27 +01:00
Benjamin Thiel
860f89e618 x86/efi: Add a prototype for efi_arch_mem_reserve()
... in order to fix a -Wmissing-ptototypes warning:

  arch/x86/platform/efi/quirks.c:245:13: warning:
  no previous prototype for ‘efi_arch_mem_reserve’ [-Wmissing-prototypes] \
	  void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)

Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200326135041.3264-1-b.thiel@posteo.de
2020-03-27 11:21:21 +01:00
Joerg Roedel
986d5ecc56 iommu: Move fwspec->iommu_priv to struct dev_iommu
Move the pointer for iommu private data from struct iommu_fwspec to
struct dev_iommu.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Will Deacon <will@kernel.org> # arm-smmu
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326150841.10083-17-joro@8bytes.org
2020-03-27 11:14:52 +01:00
Joerg Roedel
f9867f416e iommu: Introduce accessors for iommu private data
Add dev_iommu_priv_get/set() functions to access per-device iommu
private data. This makes it easier to move the pointer to a different
location.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Will Deacon <will@kernel.org> # arm-smmu
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326150841.10083-9-joro@8bytes.org
2020-03-27 11:14:51 +01:00
Joerg Roedel
72acd9df18 iommu: Move iommu_fwspec to struct dev_iommu
Move the iommu_fwspec pointer in struct device into struct dev_iommu.
This is a step in the effort to reduce the iommu related pointers in
struct device to one.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Will Deacon <will@kernel.org> # arm-smmu
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200326150841.10083-7-joro@8bytes.org
2020-03-27 11:14:51 +01:00
Joerg Roedel
045a704260 iommu: Rename struct iommu_param to dev_iommu
The term dev_iommu aligns better with other existing structures and
their accessor functions.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Will Deacon <will@kernel.org> # arm-smmu
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200326150841.10083-6-joro@8bytes.org
2020-03-27 11:12:19 +01:00
Joerg Roedel
0008d0c3b1 iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API
There are users outside of the IOMMU code that need to call that
function. Define it for !CONFIG_IOMMU_API too so that compilation does
not break.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326150841.10083-2-joro@8bytes.org
2020-03-27 11:12:19 +01:00
Jean-Philippe Brucker
3f84b96c97 iommu/virtio: Fix sparse warning
We copied the virtio_iommu_config from the virtio-iommu specification,
which declares the fields using little-endian annotations (for example
le32). Unfortunately this causes sparse to warn about comparison between
little- and cpu-endian, because of the typecheck() in virtio_cread():

drivers/iommu/virtio-iommu.c:1024:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1024:9: sparse:    restricted __le64 *
drivers/iommu/virtio-iommu.c:1024:9: sparse:    unsigned long long *
drivers/iommu/virtio-iommu.c:1036:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1036:9: sparse:    restricted __le64 *
drivers/iommu/virtio-iommu.c:1036:9: sparse:    unsigned long long *
drivers/iommu/virtio-iommu.c:1040:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1040:9: sparse:    restricted __le64 *
drivers/iommu/virtio-iommu.c:1040:9: sparse:    unsigned long long *
drivers/iommu/virtio-iommu.c:1044:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1044:9: sparse:    restricted __le32 *
drivers/iommu/virtio-iommu.c:1044:9: sparse:    unsigned int *
drivers/iommu/virtio-iommu.c:1048:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1048:9: sparse:    restricted __le32 *
drivers/iommu/virtio-iommu.c:1048:9: sparse:    unsigned int *
drivers/iommu/virtio-iommu.c:1052:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1052:9: sparse:    restricted __le32 *
drivers/iommu/virtio-iommu.c:1052:9: sparse:    unsigned int *

Although virtio_cread() does convert virtio-endian (in our case
little-endian) to cpu-endian, the typecheck() needs the two arguments to
have the same endianness. Do as UAPI headers of other virtio devices do,
and remove the endian annotation from the device config.

Even though we change the UAPI this shouldn't cause any regression since
QEMU, the existing implementation of virtio-iommu that uses this header,
already removes the annotations when importing headers.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326093558.2641019-2-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-27 11:09:18 +01:00
Andreas Kemnade
11027ce6f1 mfd: rn5t618: Add RTC related registers
Defines for some RTC related registers were missing, also
they were not included in the volatile register list

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27 09:42:18 +00:00
Andreas Kemnade
0c81604516 mfd: rn5t618: Add IRQ support
This adds support for IRQ handling in the RC5T619 which is required
for properly implementing subdevices like RTC.
For now only definitions for the variant RC5T619 are included.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27 09:42:12 +00:00
Dominique Martinet
43657496e4 net/9p: remove unused p9_req_t aux field
The p9_req_t field 'aux' has not been used in a very long time,
remove leftover field declaration

Link: http://lkml.kernel.org/r/1580941152-12973-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
2020-03-27 09:29:57 +00:00
Sergey Alirzaev
388f6966b0 9pnet: allow making incomplete read requests
A user doesn't necessarily want to wait for all the requested data to
be available, since the waiting time for each request is unbounded.

The new method permits sending one read request at a time and getting
the response ASAP, allowing to use 9pnet with synthetic file systems
representing arbitrary data streams.

Link: http://lkml.kernel.org/r/20200205204053.12751-1-l29ah@cock.li
Signed-off-by: Sergey Alirzaev <l29ah@cock.li>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
2020-03-27 09:29:56 +00:00
Jeff LaBundy
4d9cf7df8d mfd: Add support for Azoteq IQS620A/621/622/624/625
This patch adds core support for the Azoteq IQS620A, IQS621, IQS622,
IQS624 and IQS625 multi-function sensors.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27 08:25:37 +00:00
Linus Torvalds
f3e69428b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:

 - a fix to generate proper timestamps on key autorepeat events that
   were broken recently

 - a fix for Synaptics driver to only activate reduced reporting mode
   when explicitly requested

 - a new keycode for "selective screenshot" function

 - other assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: fix stale timestamp on key autorepeat events
  Input: move the new KEY_SELECTIVE_SCREENSHOT keycode
  Input: avoid BIT() macro usage in the serio.h UAPI header
  Input: synaptics-rmi4 - set reduced reporting mode only when requested
  Input: synaptics - enable RMI on HP Envy 13-ad105ng
  Input: allocate keycode for "Selective Screenshot" key
  Input: tm2-touchkey - add support for Coreriver TC360 variant
  dt-bindings: input: add Coreriver TC360 binding
  dt-bindings: vendor-prefixes: Add Coreriver vendor prefix
  Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
2020-03-26 20:49:44 -07:00
Dmitry Bogdanov
b62c362450 net: macsec: add support for getting offloaded stats
When HW offloading is enabled, offloaded stats should be used, because
s/w stats are wrong and out of sync with the HW in this case.

Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 20:17:36 -07:00
Antoine Tenart
21114b7fee net: macsec: add support for offloading to the MAC
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC,
allowing a user to select a MAC as a provider for MACsec offloading
operations.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 20:17:36 -07:00
Antoine Tenart
8fa9137180 net: macsec: allow to reference a netdev from a MACsec context
This patch allows to reference a net_device from a MACsec context. This
is needed to allow implementing MACsec operations in net device drivers.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 20:17:36 -07:00
Antoine Tenart
30e9bb8472 net: add a reference to MACsec ops in net_device
This patch adds a reference to MACsec ops to the net_device structure,
allowing net device drivers to implement offloading operations for
MACsec.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 20:17:36 -07:00
Antoine Tenart
5908220b2b net: introduce the MACSEC netdev feature
This patch introduce a new netdev feature, which will be used by drivers
to state they can perform MACsec transformations in hardware.

The patchset was gathered by Mark, macsec functinality itself
was implemented by Dmitry, Mark and Pavel Belous.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 20:17:36 -07:00
Eugene Syromiatnikov
673040c3a8 taprio: do not use BIT() in TCA_TAPRIO_ATTR_FLAG_* definitions
BIT() macro definition is internal to the Linux kernel and is not
to be used in UAPI headers; replace its usage with the _BITUL() macro
that is already used elsewhere in the header.

Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 20:08:45 -07:00
Maciej Żenczykowski
c24a77edc9 ipv6: ndisc: add support for 'PREF64' dns64 prefix identifier
This is trivial since we already have support for the entirely
identical (from the kernel's point of view) RDNSS, DNSSL, etc. that
also contain opaque data that needs to be passed down to userspace
for further processing.

As specified in draft-ietf-6man-ra-pref64-09 (while it is still a draft,
it is purely waiting on the RFC Editor for cleanups and publishing):
  PREF64 option contains lifetime and a (up to) 96-bit IPv6 prefix.

The 8-bit identifier of the option type as assigned by the IANA is 38.

Since we lack DNS64/NAT64/CLAT support in kernel at the moment,
thus this option should also be passed on to userland.

See:
  https://tools.ietf.org/html/draft-ietf-6man-ra-pref64-09
  https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml#icmpv6-parameters-5

Cc: Erik Kline <ek@google.com>
Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Michael Haro <mharo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 20:05:58 -07:00
Guillaume Nault
e4a58ef3ce net: sched: refine extack messages in tcf_change_indev
Add an error message when device wasn't found.
While there, also set the bad attribute's offset in extack.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 19:52:31 -07:00
Jacob Keller
b9a17abfde devlink: implement DEVLINK_CMD_REGION_NEW
Implement support for the DEVLINK_CMD_REGION_NEW command for creating
snapshots. This new command parallels the existing
DEVLINK_CMD_REGION_DEL.

In order for DEVLINK_CMD_REGION_NEW to work for a region, the new
".snapshot" operation must be implemented in the region's ops structure.

The desired snapshot id must be provided. This helps avoid confusion on
the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler.

The requested id will be inserted into the xarray tracking the number of
snapshots using each id. If this id is already used by another snapshot
on any region, an error will be returned.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26 19:39:26 -07:00