mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
121,030 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
6f1a4891a5 |
x86/apic/msi: Plug non-maskable MSI affinity race
Evan tracked down a subtle race between the update of the MSI message and the device raising an interrupt internally on PCI devices which do not support MSI masking. The update of the MSI message is non-atomic and consists of either 2 or 3 sequential 32bit wide writes to the PCI config space. - Write address low 32bits - Write address high 32bits (If supported by device) - Write data When an interrupt is migrated then both address and data might change, so the kernel attempts to mask the MSI interrupt first. But for MSI masking is optional, so there exist devices which do not provide it. That means that if the device raises an interrupt internally between the writes then a MSI message is sent built from half updated state. On x86 this can lead to spurious interrupts on the wrong interrupt vector when the affinity setting changes both address and data. As a consequence the device interrupt can be lost causing the device to become stuck or malfunctioning. Evan tried to handle that by disabling MSI accross an MSI message update. That's not feasible because disabling MSI has issues on its own: If MSI is disabled the PCI device is routing an interrupt to the legacy INTx mechanism. The INTx delivery can be disabled, but the disablement is not working on all devices. Some devices lose interrupts when both MSI and INTx delivery are disabled. Another way to solve this would be to enforce the allocation of the same vector on all CPUs in the system for this kind of screwed devices. That could be done, but it would bring back the vector space exhaustion problems which got solved a few years ago. Fortunately the high address (if supported by the device) is only relevant when X2APIC is enabled which implies interrupt remapping. In the interrupt remapping case the affinity setting is happening at the interrupt remapping unit and the PCI MSI message is programmed only once when the PCI device is initialized. That makes it possible to solve it with a two step update: 1) Target the MSI msg to the new vector on the current target CPU 2) Target the MSI msg to the new vector on the new target CPU In both cases writing the MSI message is only changing a single 32bit word which prevents the issue of inconsistency. After writing the final destination it is necessary to check whether the device issued an interrupt while the intermediate state #1 (new vector, current CPU) was in effect. This is possible because the affinity change is always happening on the current target CPU. The code runs with interrupts disabled, so the interrupt can be detected by checking the IRR of the local APIC. If the vector is pending in the IRR then the interrupt is retriggered on the new target CPU by sending an IPI for the associated vector on the target CPU. This can cause spurious interrupts on both the local and the new target CPU. 1) If the new vector is not in use on the local CPU and the device affected by the affinity change raised an interrupt during the transitional state (step #1 above) then interrupt entry code will ignore that spurious interrupt. The vector is marked so that the 'No irq handler for vector' warning is supressed once. 2) If the new vector is in use already on the local CPU then the IRR check might see an pending interrupt from the device which is using this vector. The IPI to the new target CPU will then invoke the handler of the device, which got the affinity change, even if that device did not issue an interrupt 3) If the new vector is in use already on the local CPU and the device affected by the affinity change raised an interrupt during the transitional state (step #1 above) then the handler of the device which uses that vector on the local CPU will be invoked. expose issues in device driver interrupt handlers which are not prepared to handle a spurious interrupt correctly. This not a regression, it's just exposing something which was already broken as spurious interrupts can happen for a lot of reasons and all driver handlers need to be able to deal with them. Reported-by: Evan Green <evgreen@chromium.org> Debugged-by: Evan Green <evgreen@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de |
||
|
|
b19efcabb5 |
Merge branch 'next' into for-linus
Prepare input updates for 5.6 merge window. |
||
|
|
26dca6dbd6 |
pci-v5.6-changes
-----BEGIN PGP SIGNATURE-----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=fQ0E
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Resource management:
- Improve resource assignment for hot-added nested bridges, e.g.,
Thunderbolt (Nicholas Johnson)
Power management:
- Optionally print config space of devices before suspend (Chen Yu)
- Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake)
Virtualization:
- Generalize DMA alias quirks (James Sewart)
- Add DMA alias quirk for PLX PEX NTB (James Sewart)
- Fix IOV memory leak (Navid Emamdoost)
AER:
- Log which device prevents error recovery (Yicong Yang)
Peer-to-peer DMA:
- Whitelist Intel SkyLake-E (Armen Baloyan)
Broadcom iProc host bridge driver:
- Apply PAXC quirk whether driver is built-in or module (Wei Liu)
Broadcom STB host bridge driver:
- Add Broadcom STB PCIe host controller driver (Jim Quinlan)
Intel Gateway SoC host bridge driver:
- Add driver for Intel Gateway SoC (Dilip Kota)
Intel VMD host bridge driver:
- Add support for DMA aliases on other buses (Jon Derrick)
- Remove dma_map_ops overrides (Jon Derrick)
- Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig)
NVIDIA Tegra host bridge driver:
- Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler)
Panasonic UniPhier host bridge driver:
- Remove module code since driver can't be built as a module
(Masahiro Yamada)
Qualcomm host bridge driver:
- Add support for SDM845 PCIe controller (Bjorn Andersson)
TI Keystone host bridge driver:
- Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I)
- Fix link training retries initiation (Yurii Monakov)
- Fix outbound region mapping (Yurii Monakov)
Misc:
- Add Switchtec Gen4 support (Kelvin Cao)
- Add Switchtec Intercomm Notify and Upstream Error Containment
support (Logan Gunthorpe)
- Use dma_set_mask_and_coherent() since Switchtec supports 64-bit
addressing (Wesley Sheng)"
* tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits)
PCI: Allow adjust_bridge_window() to shrink resource if necessary
PCI: Set resource size directly in adjust_bridge_window()
PCI: Rename extend_bridge_window() to adjust_bridge_window()
PCI: Rename extend_bridge_window() parameter
PCI: Consider alignment of hot-added bridges when assigning resources
PCI: Remove local variable usage in pci_bus_distribute_available_resources()
PCI: Pass size + alignment to pci_bus_distribute_available_resources()
PCI: Rename variables
PCI: vmd: Add two VMD Device IDs
PCI: Remove unnecessary braces
PCI: brcmstb: Add MSI support
PCI: brcmstb: Add Broadcom STB PCIe host controller driver
x86/PCI: Remove X86_DEV_DMA_OPS
PCI: vmd: Remove dma_map_ops overrides
iommu/vt-d: Remove VMD child device sanity check
iommu/vt-d: Use pci_real_dma_dev() for mapping
PCI: Introduce pci_real_dma_dev()
x86/PCI: Expose VMD's pci_dev in struct pci_sysdata
x86/PCI: Add to_pci_sysdata() helper
PCI/AER: Initialize aer_fifo
...
|
||
|
|
846de71bed |
media updates for v5.6-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl40SYEACgkQCF8+vY7k 4RU4TQ/8CgWj2+0uMRyIGpggB7B82vBPRqfHr4DIcZzbLSkdDkeDtrEfM5058cUc y3NpW9djmcqDMPvOZKFAkb03Bd+mtv89kI72RBTT2mVwCfySYa02K63RqgDg2aFU FScPUXlwB8hmZG6BpDlMiykJY1SVyhpb9R2f/7scgJ0ZKVwkKRMmLC5/I5A1IbFX WpoqNzRmT07bZJyDdm5RkzxHdM1EP0flMsqWJb3O2aWqeAw9u9+issk+Uv+cMGR+ 70+pmE/6qeurQjS9OHRhrSkf4HjybeByATfgSnONqNrWBtQXgBrHI2TjmT2NvNqV kWfsprM1GNPhsLveG6JYKGSNwZK6BHxuUULIjXAr1ocRrae2jVZ7/SZkAvnvzO3v hnb2HwgMBkQSctcl4EJDJeLIc1HgIKbZ7D/mFj7N9Mk3Kn7AqcLNHBv+GMunCPFl yXNq23ELfxC1HpmQPVhXNM/UaaO5MZCSvOD3MDObcjrxtv4b2bovi6ACDUTgGUNL sDozTurG2p1VeGupUnzia62gfb0/fjZ2WBk7RRp8E2K4/93YNEeMA9wgF0E8b4YQ SDQcDF1EtsAPF3msiXBC5FSFG42Ly7Ry04fl0v4lAle/0bPamEdQJ2CMVa1ux2Kp MRxI39CbRqtoIUbpKzTeInh/FvDDU22TimBKc5sg9d29Hk6y+Yk= =sGdY -----END PGP SIGNATURE----- Merge tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New staging driver for Rockship ISPv1 unit - New staging driver for Rockchip MIPI Synopsys DPHY RX0 - y2038 fixes at V4L2 API (backward-compatible) - A dvb core fix when receiving invalid EIT sections - Some clang-specific warnings got fixed - Added support for touch V4L2 interface at vivid - Several drivers were converted to use the new i2c_new_scanned_device() kAPI - Added sm1 support at meson's vdec driver - Several other driver cleanups, fixes and improvements * tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (207 commits) media: staging/intel-ipu3: remove TODO item about acronyms media: v4l2-fwnode: Print the node name while parsing endpoints media: Revert "media: staging/intel-ipu3: make imgu use fixed running mode" media: mt9v111: constify copied structure media: platform: VIDEO_MEDIATEK_JPEG can also depend on MTK_IOMMU media: uvcvideo: Add a quirk to force GEO GC6500 Camera bits-per-pixel value media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors media: hantro: fix post-processing NULL pointer dereference media: rcar-vin: Use correct pixel format when aligning format media: MAINTAINERS: add entry for Rockchip ISP1 driver media: staging: rkisp1: add TODO file for staging media: staging: rkisp1: add document for rkisp1 meta buffer format media: staging: rkisp1: add output device for parameters media: staging: rkisp1: add capture device for statistics media: staging: rkisp1: add user space ABI definitions media: staging: rkisp1: add streaming paths media: staging: rkisp1: add Rockchip ISP1 base driver media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver media: staging: dt-bindings: add Rockchip MIPI RX D-PHY RX0 yaml bindings media: staging: dt-bindings: add Rockchip ISP1 yaml bindings ... |
||
|
|
8fdd4019bc |
RDMA subsystem updates for 5.6
- Driver updates and cleanup for qedr, bnxt_re, hns, siw, mlx5, mlx4, rxe,
i40iw
- Larger series doing cleanup and rework for hns and hfi1.
- Some general reworking of the CM code to make it a little more
understandable
- Unify the different code paths connected to the uverbs FD scheme
- New UAPI ioctls conversions for get context and get async fd
- Trace points for CQ and CM portions of the RDMA stack
- mlx5 driver support for virtio-net formatted rings as RDMA raw ethernet QPs
- verbs support for setting the PCI-E relaxed ordering bit on DMA traffic
connected to a MR
- A couple of bug fixes that came too late to make rc7
-----BEGIN PGP SIGNATURE-----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=hepK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A very quiet cycle with few notable changes. Mostly the usual list of
one or two patches to drivers changing something that isn't quite rc
worthy. The subsystem seems to be seeing a larger number of rework and
cleanup style patches right now, I feel that several vendors are
prepping their drivers for new silicon.
Summary:
- Driver updates and cleanup for qedr, bnxt_re, hns, siw, mlx5, mlx4,
rxe, i40iw
- Larger series doing cleanup and rework for hns and hfi1.
- Some general reworking of the CM code to make it a little more
understandable
- Unify the different code paths connected to the uverbs FD scheme
- New UAPI ioctls conversions for get context and get async fd
- Trace points for CQ and CM portions of the RDMA stack
- mlx5 driver support for virtio-net formatted rings as RDMA raw
ethernet QPs
- verbs support for setting the PCI-E relaxed ordering bit on DMA
traffic connected to a MR
- A couple of bug fixes that came too late to make rc7"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (108 commits)
RDMA/core: Make the entire API tree static
RDMA/efa: Mask access flags with the correct optional range
RDMA/cma: Fix unbalanced cm_id reference count during address resolve
RDMA/umem: Fix ib_umem_find_best_pgsz()
IB/mlx4: Fix leak in id_map_find_del
IB/opa_vnic: Spelling correction of 'erorr' to 'error'
IB/hfi1: Fix logical condition in msix_request_irq
RDMA/cm: Remove CM message structs
RDMA/cm: Use IBA functions for complex structure members
RDMA/cm: Use IBA functions for simple structure members
RDMA/cm: Use IBA functions for swapping get/set acessors
RDMA/cm: Use IBA functions for simple get/set acessors
RDMA/cm: Add SET/GET implementations to hide IBA wire format
RDMA/cm: Add accessors for CM_REQ transport_type
IB/mlx5: Return the administrative GUID if exists
RDMA/core: Ensure that rdma_user_mmap_entry_remove() is a fence
IB/mlx4: Fix memory leak in add_gid error flow
IB/mlx5: Expose RoCE accelerator counters
RDMA/mlx5: Set relaxed ordering when requested
RDMA/core: Add the core support field to METHOD_GET_CONTEXT
...
|
||
|
|
cf3c8f84d1 |
More power manadement updates for 5.6-rc1
Prevent cpufreq from creating excessively large stack frames and fix
the handling of devices deleted during system-wide resume in the PM
core (Rafael Wysocki), revert a problematic commit affecting the
cpupower utility and correct its man page (Thomas Renninger,
Brahadambal Srinivasan), and improve the intel_pstate_tracer
utility (Doug Smythies).
-----BEGIN PGP SIGNATURE-----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=ctQq
-----END PGP SIGNATURE-----
Merge tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power manadement updates from Rafael Wysocki:
"Prevent cpufreq from creating excessively large stack frames and fix
the handling of devices deleted during system-wide resume in the PM
core (Rafael Wysocki), revert a problematic commit affecting the
cpupower utility and correct its man page (Thomas Renninger,
Brahadambal Srinivasan), and improve the intel_pstate_tracer utility
(Doug Smythies)"
* tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis
tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility
Correction to manpage of cpupower
cpufreq: Avoid creating excessively large stack frames
PM: core: Fix handling of devices deleted during system-wide resume
cpupower: Revert library ABI changes from commit
|
||
|
|
db865ee447 |
Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', 'clk-freescale' and 'clk-qoriq' into clk-next
- Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings |
||
|
|
6e7a9f0c4e |
Merge branches 'clk-debugfs-danger', 'clk-basic-hw', 'clk-renesas', 'clk-amlogic' and 'clk-allwinner' into clk-next
- Support dangerous debugfs actions on clks with dead code - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs * clk-debugfs-danger: clk: Add support for setting clk_rate via debugfs * clk-basic-hw: clk: divider: Add support for specifying parents via DT/pointers clk: gate: Add support for specifying parents via DT/pointers clk: mux: Add support for specifying parents via DT/pointers clk: asm9260: Use parent accuracy in fixed rate clk clk: fixed-rate: Document that accuracy isn't a rate clk: fixed-rate: Add clk flags for parent accuracy clk: fixed-rate: Add support for specifying parents via DT/pointers clk: fixed-rate: Document accuracy member clk: fixed-rate: Move to_clk_fixed_rate() to C file clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy() clk: fixed-rate: Convert to clk_hw based APIs clk: gpio: Use DT way of specifying parents * clk-renesas: clk: renesas: Prepare for split of R-Car H3 config symbol dt-bindings: clock: renesas: cpg-mssr: Fix r8a774b1 typo clk: renesas: r7s9210: Add SPIBSC clock clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks clk: renesas: Remove use of ARCH_R8A7796 clk: renesas: rcar-gen2: Change multipliers and dividers to u8 * clk-amlogic: clk: clarify that clk_set_rate() does updates from top to bottom clk: meson: meson8b: make the CCF use the glitch-free mali mux clk: meson: pll: Fix by 0 division in __pll_params_to_rate() clk: meson: g12a: fix missing uart2 in regmap table clk: meson: meson8b: use of_clk_hw_register to register the clocks clk: meson: meson8b: don't register the XTAL clock when provided via OF clk: meson: meson8b: change references to the XTAL clock to use [fw_]name clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding * clk-allwinner: clk: sunxi: a23/a33: Export the MIPI PLL clk: sunxi: a31: Export the MIPI PLL clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock clk: sunxi-ng: r40: Export MBUS clock clk: sunxi: use of_device_get_match_data |
||
|
|
677b60dcb6 |
New code for 5.6:
- Fix an off-by-one error when checking if offset is within inode size -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl4vLo4ACgkQ+H93GTRK tOtFNg/+I0IVdJgzMPe6PoEhbMc80c1CK7yxjprtq6I1WV5/OVbpNSnXqym8vYPs atp+8loh9LMMYhi8ln0DyU0clu8p97+7D/aUqkN4DzKJ3t0T/LFR8NPHh7P7H3i/ rI0Ym8pTorueC3qgcVzgP2Xx8+yoURvlRV0VSd8C9Vza9E3g7U+8cAAzZz/iMbpy QbW32mrEWWtACLqVEj94+sNj9O4wHy1kefkBITWBkdmaWvqP6KBWJsdQrySHNHN4 BXEwOrfxM5w8isd9hOd3U6NPkY0I7EGq7K4aQhRzyoIw9LJ+APjpCvY1KpmFs1Ar 7yOM026MdZKGguL1cZcgXzFpIKbkv4xj4231RD6yKXUk1XhMIs+7JO+ontRekPg3 2oZgPJoz+5QXtcpJifKzwzwr32WFssX/HhYFlzbbq1SRlJBWEyKfPBXY8yoeAJJb lHK/fjsPwGeTgMG0/n3+r/GhO+3FDzDosFYHpD0IZIX08770tam7nB4hlGrJEel1 74/cxxphNeU1PkjV43V4vxTNucEkFNn+CDD9/9MvEx8ZXtz01HkIbEsANdyZM7yj SO0wjkHQjkm9YlBP+lh03ign4YQYYVQLN2zdw3VzK2QYo0GKln+o/wWrXhJksZ8t AT70yqYx2lntnkasvMPO02pgZulorM605mgUGkbwslcmuifvpo0= =iPhi -----END PGP SIGNATURE----- Merge tag 'iomap-5.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap fix from Darrick Wong: "A single patch fixing an off-by-one error when we're checking to see how far we're gotten into an EOF page" * tag 'iomap-5.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: fs: Fix page_mkwrite off-by-one errors |
||
|
|
7eec11d3a7 |
Merge branch 'akpm' (patches from Andrew)
Pull updates from Andrew Morton:
"Most of -mm and quite a number of other subsystems: hotfixes, scripts,
ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.
MM is fairly quiet this time. Holidays, I assume"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
kcov: ignore fault-inject and stacktrace
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
execve: warn if process starts with executable stack
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
init/main.c: fix misleading "This architecture does not have kernel memory protection" message
init/main.c: fix quoted value handling in unknown_bootoption
init/main.c: remove unnecessary repair_env_string in do_initcall_level
init/main.c: log arguments and environment passed to init
fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
fs/binfmt_elf.c: coredump: delete duplicated overflow check
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
fs/binfmt_elf.c: make BAD_ADDR() unlikely
fs/binfmt_elf.c: better codegen around current->mm
fs/binfmt_elf.c: don't copy ELF header around
fs/binfmt_elf.c: fix ->start_code calculation
fs/binfmt_elf.c: smaller code generation around auxv vector fill
lib/find_bit.c: uninline helper _find_next_bit()
lib/find_bit.c: join _find_next_bit{_le}
uapi: rename ext2_swab() to swab() and share globally in swab.h
lib/scatterlist.c: adjust indentation in __sg_alloc_table
...
|
||
|
|
24a448b165 |
XArray: Fix incorrect comment in header file
256 means Retry entry and 257 means Zero entry, so fix it. Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
||
|
|
ddaefe8947 |
Modules updates for v5.6
Summary of modules changes for the 5.6 merge window:
- Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings to
indicate to the linker that it can perform string deduplication (i.e.,
duplicate strings are reduced to a single copy in the string table).
This means any repeated namespace string would be merged to just one
entry in __ksymtab_strings.
- Various code cleanups and small fixes (fix small memleak in error path,
improve moduleparam docs, silence rcu warnings, improve error logging)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=boqg
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 5.6 merge window:
- Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings
to indicate to the linker that it can perform string deduplication
(i.e., duplicate strings are reduced to a single copy in the string
table). This means any repeated namespace string would be merged to
just one entry in __ksymtab_strings.
- Various code cleanups and small fixes (fix small memleak in error
path, improve moduleparam docs, silence rcu warnings, improve error
logging)"
* tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module.h: Annotate mod_kallsyms with __rcu
module: avoid setting info->name early in case we can fall back to info->mod->name
modsign: print module name along with error message
kernel/module: Fix memleak in module_add_modinfo_attrs()
export.h: reduce __ksymtab_strings string duplication by using "MS" section flags
moduleparam: fix kerneldoc
modules: lockdep: Suppress suspicious RCU usage warning
|
||
|
|
264b0d2bee |
percpu: Separate decrypted varaibles anytime encryption can be enabled
CONFIG_VIRTUALIZATION may not be enabled for memory encrypted guests. If
disabled, decrypted per-CPU variables may end up sharing the same page
with variables that should be left encrypted.
Always separate per-CPU variables that should be decrypted into their own
page anytime memory encryption can be enabled in the guest rather than
rely on any other config option that may not be enabled.
Fixes:
|
||
|
|
becef184df |
percpu: fix __percpu annotation in asm-generic
The generic implementation of raw_cpu_generic_add_return() is:
#define raw_cpu_generic_add_return(pcp, val) \
({ \
typeof(&(pcp)) __p = raw_cpu_ptr(&(pcp)); \
\
*__p += val; \
*__p; \
})
where the 'pcp' argument is a __percpu lvalue.
There, the variable '__p' is declared as a __percpu pointer
the type of the address of 'pcp') but:
1) the value assigned to it, the return value of raw_cpu_ptr(), is
a plain (__kernel) pointer, not a __percpu one.
2) this variable is dereferenced just after while a __percpu
pointer is implicitly __noderef.
So, fix the declaration of the 'pcp' variable to its correct type:
the plain (non-percpu) pointer corresponding to pcp's address,
using the fact that typeof() ignores the address space and the
'noderef' attribute of its agument.
Same for raw_cpu_generic_xchg(), raw_cpu_generic_cmpxchg() &
raw_cpu_generic_cmpxchg_double().
This removes 209 warnings on ARM, 525 on ARM64, 220 on x86 &
more than 2600 on ppc64 (all of them with the default config).
Cc: Tejun Heo <tj@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
|
||
|
|
2b755626ca |
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
Use PHYS_PFN() macro in io_mapping_map_atomic_wc() instead of open coded variant. Link: http://lkml.kernel.org/r/20191209165624.56351-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
d5767057c9 |
uapi: rename ext2_swab() to swab() and share globally in swab.h
ext2_swab() is defined locally in lib/find_bit.c However it is not specific to ext2, neither to bitmaps. There are many potential users of it, so rename it to just swab() and move to include/uapi/linux/swab.h ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG, therefore drop unneeded cast. Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com Signed-off-by: Yury Norov <yury.norov@gmail.com> Cc: Allison Randal <allison@lohutok.net> Cc: Joe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
803521b149 |
lib/zlib: add zlib_deflate_dfltcc_enabled() function
Add a new function to zlib.h checking if s390 Deflate-Conversion facility is installed and enabled. Link: http://lkml.kernel.org/r/20200103223334.20669-6-zaslonko@linux.ibm.com Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
cdf309fb38 |
thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h>
This removes the kelvin to/from Celsius conversion helper macros in <linux/thermal.h> which were switched to the inline helper functions in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-9-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
23331e4893 |
include/linux/units.h: add helpers for kelvin to/from Celsius conversion
Patch series "add header file for kelvin to/from Celsius conversion helpers", v4. There are several helper macros to convert kelvin to/from Celsius in <linux/thermal.h> for thermal drivers. These are useful for any other drivers or subsystems, but it's odd to include <linux/thermal.h> just for the helpers. This adds a new <linux/units.h> that provides the equivalent inline functions for any drivers or subsystems, and switches all the users of conversion helpers in <linux/thermal.h> to use <linux/units.h> helpers. This patch (of 12): There are several helper macros to convert kelvin to/from Celsius in <linux/thermal.h> for thermal drivers. These are useful for any other drivers or subsystems, but it's odd to include <linux/thermal.h> just for the helpers. This adds a new <linux/units.h> that provides the equivalent inline functions for any drivers or subsystems. It is intended to replace the helpers in <linux/thermal.h>. Link: http://lkml.kernel.org/r/1576386975-7941-2-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Andy Shevchenko <andy@infradead.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
0a3c577297 |
mm: fix comments related to node reclaim
As zone reclaim has been replaced by node reclaim, this patch fixes related comments. Link: http://lkml.kernel.org/r/20191126141346.GA22665@haolee.github.io Signed-off-by: Hao Lee <haolee.swjtu@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
068964541d |
include/linux/memory.h: drop fields 'hw' and 'phys_callback' from struct memory_block
memory_block structure elements 'hw' and 'phys_callback' are not getting
used. This was originally added with commit
|
||
|
|
ca023a92c8 |
include/linux/mm.h: remove dead code totalram_pages_set()
totalram_pages_set() was introduced in commit
|
||
|
|
26b56e116a |
include/linux/mm.h: clean up obsolete check on space in page->flags
The check was intended to make sure we don't overrun page flags. But it's obsolete because it doesn't include LAST_CPUPID_WIDTH nor KASAN_TAG_WIDTH. Just remove check since we already have it covered in linux/page-flags-layout.h (near the end of the file). Link: http://lkml.kernel.org/r/20191208183508.89177-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
4a55c0474a |
mm/hotplug: silence a lockdep splat with printk()
It is not that hard to trigger lockdep splats by calling printk from
under zone->lock. Most of them are false positives caused by lock
chains introduced early in the boot process and they do not cause any
real problems (although most of the early boot lock dependencies could
happen after boot as well). There are some console drivers which do
allocate from the printk context as well and those should be fixed. In
any case, false positives are not that trivial to workaround and it is
far from optimal to lose lockdep functionality for something that is a
non-issue.
So change has_unmovable_pages() so that it no longer calls dump_page()
itself - instead it returns a "struct page *" of the unmovable page back
to the caller so that in the case of a has_unmovable_pages() failure,
the caller can call dump_page() after releasing zone->lock. Also, make
dump_page() is able to report a CMA page as well, so the reason string
from has_unmovable_pages() can be removed.
Even though has_unmovable_pages doesn't hold any reference to the
returned page this should be reasonably safe for the purpose of
reporting the page (dump_page) because it cannot be hotremoved in the
context of memory unplug. The state of the page might change but that
is the case even with the existing code as zone->lock only plays role
for free pages.
While at it, remove a similar but unnecessary debug-only printk() as
well. A sample of one of those lockdep splats is,
WARNING: possible circular locking dependency detected
------------------------------------------------------
test.sh/8653 is trying to acquire lock:
ffffffff865a4460 (console_owner){-.-.}, at:
console_unlock+0x207/0x750
but task is already holding lock:
ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at:
__offline_isolated_pages+0x179/0x3e0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&(&zone->lock)->rlock){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock+0x2f/0x40
rmqueue_bulk.constprop.21+0xb6/0x1160
get_page_from_freelist+0x898/0x22c0
__alloc_pages_nodemask+0x2f3/0x1cd0
alloc_pages_current+0x9c/0x110
allocate_slab+0x4c6/0x19c0
new_slab+0x46/0x70
___slab_alloc+0x58b/0x960
__slab_alloc+0x43/0x70
__kmalloc+0x3ad/0x4b0
__tty_buffer_request_room+0x100/0x250
tty_insert_flip_string_fixed_flag+0x67/0x110
pty_write+0xa2/0xf0
n_tty_write+0x36b/0x7b0
tty_write+0x284/0x4c0
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
redirected_tty_write+0x6a/0xc0
do_iter_write+0x248/0x2a0
vfs_writev+0x106/0x1e0
do_writev+0xd4/0x180
__x64_sys_writev+0x45/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #2 (&(&port->lock)->rlock){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock_irqsave+0x3a/0x50
tty_port_tty_get+0x20/0x60
tty_port_default_wakeup+0xf/0x30
tty_port_tty_wakeup+0x39/0x40
uart_write_wakeup+0x2a/0x40
serial8250_tx_chars+0x22e/0x440
serial8250_handle_irq.part.8+0x14a/0x170
serial8250_default_handle_irq+0x5c/0x90
serial8250_interrupt+0xa6/0x130
__handle_irq_event_percpu+0x78/0x4f0
handle_irq_event_percpu+0x70/0x100
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x117/0x370
do_IRQ+0x9e/0x1e0
ret_from_intr+0x0/0x2a
cpuidle_enter_state+0x156/0x8e0
cpuidle_enter+0x41/0x70
call_cpuidle+0x5e/0x90
do_idle+0x333/0x370
cpu_startup_entry+0x1d/0x1f
start_secondary+0x290/0x330
secondary_startup_64+0xb6/0xc0
-> #1 (&port_lock_key){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock_irqsave+0x3a/0x50
serial8250_console_write+0x3e4/0x450
univ8250_console_write+0x4b/0x60
console_unlock+0x501/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
-> #0 (console_owner){-.-.}:
check_prev_add+0x107/0xea0
validate_chain+0x8fc/0x1200
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
console_unlock+0x269/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
__offline_isolated_pages.cold.52+0x2f/0x30a
offline_isolated_pages_cb+0x17/0x30
walk_system_ram_range+0xda/0x160
__offline_pages+0x79c/0xa10
offline_pages+0x11/0x20
memory_subsys_offline+0x7e/0xc0
device_offline+0xd5/0x110
state_store+0xc6/0xe0
dev_attr_store+0x3f/0x60
sysfs_kf_write+0x89/0xb0
kernfs_fop_write+0x188/0x240
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
ksys_write+0xc6/0x160
__x64_sys_write+0x43/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
console_owner --> &(&port->lock)->rlock --> &(&zone->lock)->rlock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&zone->lock)->rlock);
lock(&(&port->lock)->rlock);
lock(&(&zone->lock)->rlock);
lock(console_owner);
*** DEADLOCK ***
9 locks held by test.sh/8653:
#0: ffff88839ba7d408 (sb_writers#4){.+.+}, at:
vfs_write+0x25f/0x290
#1: ffff888277618880 (&of->mutex){+.+.}, at:
kernfs_fop_write+0x128/0x240
#2: ffff8898131fc218 (kn->count#115){.+.+}, at:
kernfs_fop_write+0x138/0x240
#3: ffffffff86962a80 (device_hotplug_lock){+.+.}, at:
lock_device_hotplug_sysfs+0x16/0x50
#4: ffff8884374f4990 (&dev->mutex){....}, at:
device_offline+0x70/0x110
#5: ffffffff86515250 (cpu_hotplug_lock.rw_sem){++++}, at:
__offline_pages+0xbf/0xa10
#6: ffffffff867405f0 (mem_hotplug_lock.rw_sem){++++}, at:
percpu_down_write+0x87/0x2f0
#7: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at:
__offline_isolated_pages+0x179/0x3e0
#8: ffffffff865a4920 (console_lock){+.+.}, at:
vprintk_emit+0x100/0x340
stack backtrace:
Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 Gen10,
BIOS U34 05/21/2019
Call Trace:
dump_stack+0x86/0xca
print_circular_bug.cold.31+0x243/0x26e
check_noncircular+0x29e/0x2e0
check_prev_add+0x107/0xea0
validate_chain+0x8fc/0x1200
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
console_unlock+0x269/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
__offline_isolated_pages.cold.52+0x2f/0x30a
offline_isolated_pages_cb+0x17/0x30
walk_system_ram_range+0xda/0x160
__offline_pages+0x79c/0xa10
offline_pages+0x11/0x20
memory_subsys_offline+0x7e/0xc0
device_offline+0xd5/0x110
state_store+0xc6/0xe0
dev_attr_store+0x3f/0x60
sysfs_kf_write+0x89/0xb0
kernfs_fop_write+0x188/0x240
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
ksys_write+0xc6/0x160
__x64_sys_write+0x43/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Link: http://lkml.kernel.org/r/20200117181200.20299-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
bd5c2344f9 |
mm/memory_hotplug: pass in nid to online_pages()
Patch series "mm/memory_hotplug: pass in nid to online_pages()". Simplify onlining code and get rid of find_memory_block(). Pass in the nid from the memory block we are trying to online directly, instead of manually looking it up. This patch (of 2): No need to lookup the memory block, we can directly pass in the nid. Link: http://lkml.kernel.org/r/20200113113354.6341-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
02634a44b8 |
mm/memblock: define memblock_physmem_add()
On the s390 platform memblock.physmem array is being built by directly calling into memblock_add_range() which is a low level function not intended to be used outside of memblock. Hence lets conditionally add helper functions for physmem array when HAVE_MEMBLOCK_PHYS_MAP is enabled. Also use MAX_NUMNODES instead of 0 as node ID similar to memblock_add() and memblock_reserve(). Make memblock_add_range() a static function as it is no longer getting used outside of memblock. Link: http://lkml.kernel.org/r/1578283835-21969-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Collin Walling <walling@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
fe4c86c916 |
mm: remove "count" parameter from has_unmovable_pages()
Now that the memory isolate notifier is gone, the parameter is always 0. Drop it and cleanup has_unmovable_pages(). Link: http://lkml.kernel.org/r/20191114131911.11783-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Qian Cai <cai@lca.pw> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
3f9903b9ca |
mm: remove the memory isolate notifier
Luckily, we have no users left, so we can get rid of it. Cleanup set_migratetype_isolate() a little bit. Link: http://lkml.kernel.org/r/20191114131911.11783-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <cai@lca.pw> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
7e168b9bab |
mm, tracing: print symbol name for kmem_alloc_node call_site events
Print the call_site ip of kmem_alloc_node using '%pS' to improve the readability of raw slab trace points. Link: http://lkml.kernel.org/r/1577949568-4518-1-git-send-email-sunjunyong@xiaomi.com Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Changbin Du <changbin.du@intel.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
f1f6a7dd9b |
mm, tree-wide: rename put_user_page*() to unpin_user_page*()
In order to provide a clearer, more symmetric API for pinning and unpinning DMA pages. This way, pin_user_pages*() calls match up with unpin_user_pages*() calls, and the API is a lot closer to being self-explanatory. Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
eddb1c228f |
mm/gup: introduce pin_user_pages*() and FOLL_PIN
Introduce pin_user_pages*() variations of get_user_pages*() calls, and
also pin_longterm_pages*() variations.
For now, these are placeholder calls, until the various call sites are
converted to use the correct get_user_pages*() or pin_user_pages*() API.
These variants will eventually all set FOLL_PIN, which is also
introduced, and thoroughly documented.
pin_user_pages()
pin_user_pages_remote()
pin_user_pages_fast()
All pages that are pinned via the above calls, must be unpinned via
put_user_page().
The underlying rules are:
* FOLL_PIN is a gup-internal flag, so the call sites should not directly
set it. That behavior is enforced with assertions.
* Call sites that want to indicate that they are going to do DirectIO
("DIO") or something with similar characteristics, should call a
get_user_pages()-like wrapper call that sets FOLL_PIN. These wrappers
will:
* Start with "pin_user_pages" instead of "get_user_pages". That
makes it easy to find and audit the call sites.
* Set FOLL_PIN
* For pages that are received via FOLL_PIN, those pages must be returned
via put_user_page().
Thanks to Jan Kara and Vlastimil Babka for explaining the 4 cases in
this documentation. (I've reworded it and expanded upon it.)
Link: http://lkml.kernel.org/r/20200107224558.2362728-12-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [Documentation]
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
07d8026995 |
mm: devmap: refactor 1-based refcounting for ZONE_DEVICE pages
An upcoming patch changes and complicates the refcounting and especially the "put page" aspects of it. In order to keep everything clean, refactor the devmap page release routines: * Rename put_devmap_managed_page() to page_is_devmap_managed(), and limit the functionality to "read only": return a bool, with no side effects. * Add a new routine, put_devmap_managed_page(), to handle decrementing the refcount for ZONE_DEVICE pages. * Change callers (just release_pages() and put_page()) to check page_is_devmap_managed() before calling the new put_devmap_managed_page() routine. This is a performance point: put_page() is a hot path, so we need to avoid non- inline function calls where possible. * Rename __put_devmap_managed_page() to free_devmap_managed_page(), and limit the functionality to unconditionally freeing a devmap page. This is originally based on a separate patch by Ira Weiny, which applied to an early version of the put_user_page() experiments. Since then, Jérôme Glisse suggested the refactoring described above. Link: http://lkml.kernel.org/r/20200107224558.2362728-5-jhubbard@nvidia.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Suggested-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
ddf8f376d1 |
mm/filemap.c: clean up filemap_write_and_wait()
At some point filemap_write_and_wait() and filemap_write_and_wait_range() got the exact same implementation with the exception of the range being specified in *_range() Similar to other functions in fs.h which call *_range(..., 0, LLONG_MAX), change filemap_write_and_wait() to be a static inline which calls filemap_write_and_wait_range() Link: http://lkml.kernel.org/r/20191129160713.30892-1-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
dd3e7cba16 |
ocfs2/dlm: move BITS_TO_BYTES() to bitops.h for wider use
There are users already and will be more of BITS_TO_BYTES() macro. Move it to bitops.h for wider use. In the case of ocfs2 the replacement is identical. As for bnx2x, there are two places where floor version is used. In the first case to calculate the amount of structures that can fit one memory page. In this case obviously the ceiling variant is correct and original code might have a potential bug, if amount of bits % 8 is not 0. In the second case the macro is used to calculate bytes transmitted in one microsecond. This will work for all speeds which is multiply of 1Gbps without any change, for the rest new code will give ceiling value, for instance 100Mbps will give 13 bytes, while old code gives 12 bytes and the arithmetically correct one is 12.5 bytes. Further the value is used to setup timer threshold which in any case has its own margins due to certain resolution. I don't see here an issue with slightly shifting thresholds for low speed connections, the card is supposed to utilize highest available rate, which is usually 10Gbps. Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
68f23b8906 |
memcg: fix a crash in wb_workfn when a device disappears
Without memcg, there is a one-to-one mapping between the bdi and bdi_writeback structures. In this world, things are fairly straightforward; the first thing bdi_unregister() does is to shutdown the bdi_writeback structure (or wb), and part of that writeback ensures that no other work queued against the wb, and that the wb is fully drained. With memcg, however, there is a one-to-many relationship between the bdi and bdi_writeback structures; that is, there are multiple wb objects which can all point to a single bdi. There is a refcount which prevents the bdi object from being released (and hence, unregistered). So in theory, the bdi_unregister() *should* only get called once its refcount goes to zero (bdi_put will drop the refcount, and when it is zero, release_bdi gets called, which calls bdi_unregister). Unfortunately, del_gendisk() in block/gen_hd.c never got the memo about the Brave New memcg World, and calls bdi_unregister directly. It does this without informing the file system, or the memcg code, or anything else. This causes the root wb associated with the bdi to be unregistered, but none of the memcg-specific wb's are shutdown. So when one of these wb's are woken up to do delayed work, they try to dereference their wb->bdi->dev to fetch the device name, but unfortunately bdi->dev is now NULL, thanks to the bdi_unregister() called by del_gendisk(). As a result, *boom*. Fortunately, it looks like the rest of the writeback path is perfectly happy with bdi->dev and bdi->owner being NULL, so the simplest fix is to create a bdi_dev_name() function which can handle bdi->dev being NULL. This also allows us to bulletproof the writeback tracepoints to prevent them from dereferencing a NULL pointer and crashing the kernel if one is tracing with memcg's enabled, and an iSCSI device dies or a USB storage stick is pulled. The most common way of triggering this will be hotremoval of a device while writeback with memcg enabled is going on. It was triggering several times a day in a heavily loaded production environment. Google Bug Id: 145475544 Link: https://lore.kernel.org/r/20191227194829.150110-1-tytso@mit.edu Link: http://lkml.kernel.org/r/20191228005211.163952-1-tytso@mit.edu Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <clm@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
c67c10a67f |
kdb: kdb_current_regs should be private
As of the patch ("MIPS: kdb: Remove old workaround for backtracing on
other CPUs") there is no reason for kdb_current_regs to be in the
public "kdb.h". Let's move it next to kdb_current_task.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111623.2.Iadbfb484e90b557cc4b5ac9890bfca732cd99d77@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
||
|
|
e813e65038 |
ARM: Cleanups and corner case fixes
PPC: Bugfixes
x86:
* Support for mapping DAX areas with large nested page table entries.
* Cleanups and bugfixes here too. A particularly important one is
a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to exploit
the guest kernel, for which the embargo expired today.
* Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
* Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling hyperthread
to read it), which unfortunately is an even bigger whack-a-mole game
than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large refactoring
of vCPU creation that affects all architectures but should not have any
visible effect.
s390 will come next week together with some more x86 patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeMxtCAAoJEL/70l94x66DQxIIAJv9hMmXLQHGFnUMskjGErR6
DCLSC0YRdRMwE50CerblyJtGsMwGsPyHZwvZxoAceKJ9w0Yay9cyaoJ87ItBgHoY
ce0HrqIUYqRSJ/F8WH2lSzkzMBr839rcmqw8p1tt4D5DIsYnxHGWwRaaP+5M/1KQ
YKFu3Hea4L00U339iIuDkuA+xgz92LIbsn38svv5fxHhPAyWza0rDEYHNgzMKuoF
IakLf5+RrBFAh6ZuhYWQQ44uxjb+uQa9pVmcqYzzTd5t1g4PV5uXtlJKesHoAvik
Eba8IEUJn+HgQJjhp3YxQYuLeWOwRF3bwOiZ578MlJ4OPfYXMtbdlqCQANHOcGk=
=H/q1
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"This is the first batch of KVM changes.
ARM:
- cleanups and corner case fixes.
PPC:
- Bugfixes
x86:
- Support for mapping DAX areas with large nested page table entries.
- Cleanups and bugfixes here too. A particularly important one is a
fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to
exploit the guest kernel, for which the embargo expired today.
- Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
- Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling
hyperthread to read it), which unfortunately is an even bigger
whack-a-mole game than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large
refactoring of vCPU creation that affects all architectures but should
not have any visible effect.
s390 will come next week together with some more x86 patches"
* tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
x86/KVM: Clean up host's steal time structure
x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed
x86/kvm: Cache gfn to pfn translation
x86/kvm: Introduce kvm_(un)map_gfn()
x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit
KVM: PPC: Book3S PR: Fix -Werror=return-type build failure
KVM: PPC: Book3S HV: Release lock on page-out failure path
KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer
KVM: arm64: pmu: Only handle supported event counters
KVM: arm64: pmu: Fix chained SW_INCR counters
KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled
KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset
KVM: x86: Use a typedef for fastop functions
KVM: X86: Add 'else' to unify fastop and execute call path
KVM: x86: inline memslot_valid_for_gpte
KVM: x86/mmu: Use huge pages for DAX-backed files
KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte()
KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust()
KVM: x86/mmu: Zap any compound page when collapsing sptes
KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch)
...
|
||
|
|
f32df58acc |
drm/bridge: Add the necessary bits to support bus format negotiation
drm_bridge_state is extended to describe the input and output bus
configurations. These bus configurations are exposed through the
drm_bus_cfg struct which encodes the configuration of a physical
bus between two components in an output pipeline, usually between
two bridges, an encoder and a bridge, or a bridge and a connector.
The bus configuration is stored in drm_bridge_state separately for
the input and output buses, as seen from the point of view of each
bridge. The bus configuration of a bridge output is usually identical
to the configuration of the next bridge's input, but may differ if
the signals are modified between the two bridges, for instance by an
inverter on the board. The input and output configurations of a
bridge may differ if the bridge modifies the signals internally,
for instance by performing format conversion, or*modifying signals
polarities.
Bus format negotiation is automated by the core, drivers just have
to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they
want to take part to this negotiation. Negotiation happens in reverse
order, starting from the last element of the chain (the one directly
connected to the display) up to the first element of the chain (the one
connected to the encoder).
During this negotiation all supported formats are tested until we find
one that works, meaning that the formats array should be in decreasing
preference order (assuming the driver has a preference order).
Note that the bus format negotiation works even if some elements in the
chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks.
In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets
the previous bridge element decide what to do (most of the time, bridge
drivers will pick a default bus format or extract this piece of
information from somewhere else, like a FW property).
v10:
* Add changelog to the commit message
v9:
* No changes
v8:
* Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by
Jonas)
v7:
* Adapt the code to deal with the fact that not all bridges in the
chain have a bridge state
v5 -> v6:
* No changes
v4:
* Enhance the doc
* Fix typos
* Rename some parameters/fields
* Reword the commit message
v3:
* Fix the commit message (Reported by Laurent)
* Document the fact that bus formats should not be directly modified by
drivers (Suggested by Laurent)
* Document the fact that format order matters (Suggested by Laurent)
* Propagate bus flags by default
* Document the fact that drivers can tweak bus flags if needed
* Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format
array (Suggested by Laurent)
* Add a drm_atomic_helper_bridge_propagate_bus_fmt()
* Mandate that bridge drivers return accurate input_fmts even if they
are known to be the first element in the bridge chain
v2:
* Rework things to support more complex use cases
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format]
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
|
||
|
|
cb639a420e |
ALSA: pcm: Fix sparse warnings wrt snd_pcm_state_t
Since we have a bitwise definition of snd_pcm_state_t and use it for
certain struct fields, a few new (and years old) sparse warnings came
up. This patch is an attempt to cover them.
- The state fields in snd_pcm_mmap_status* and co are all defined as
snd_pcm_state_t type now
- The PCM action callbacks take snd_pcm_state_t argument as well;
some actions taking special values got the explicit cast and
comments
- For the PCM action that doesn't need an extra argument receives
ACTION_ARG_IGNORE instead of ambiguous 0
While we're at it, the boolean argument is also properly changed to
bool and true/false, as well as a slight refactoring of PCM pause
helper function to make easier to read.
No functional changes, just shutting up chatty sparse.
Fixes:
|
||
|
|
5061b8a969 |
drm/bridge: Add an ->atomic_check() hook
So that bridge drivers have a way to check/reject an atomic operation. The drm_atomic_bridge_chain_check() (which is just a wrapper around the ->atomic_check() hook) is called in place of drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented, the core falls back on ->mode_fixup(), so the behavior should stay the same for existing bridge drivers). v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Fix a NULL pointer dereference v5 -> v6: * No changes v4: * Add R-bs v3: * No changes v2: * Clarify the fact that ->atomic_check() is replacing ->mode_fixup() Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-6-boris.brezillon@collabora.com |
||
|
|
41cf57124e |
drm/bridge: Patch atomic hooks to take a drm_bridge_state
This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The drivers implementing those hooks are patched too. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Adjust things to the bridge_state changes v6: * Also fixed rcar-du/rcar_lvds.c same as analogix/analogix_dp_core.c v5: * No changes v4: * Rename func params into old_bridge_state * Add Laurent's Rb v3: * Old state clarification moved to a separate patch v2: * Pass the old bridge state Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable] Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-5-boris.brezillon@collabora.com |
||
|
|
751465913f |
drm/bridge: Add a drm_bridge_state object
One of the last remaining objects to not have its atomic state.
This is being motivated by our attempt to support runtime bus-format
negotiation between elements of the bridge chain.
This patch just paves the road for such a feature by adding a new
drm_bridge_state object inheriting from drm_private_obj so we can
re-use some of the existing state initialization/tracking logic.
v10:
* Add changelog to the commit message
v9:
* Clarify the fact that the bridge->atomic_reset() and
{connector,plane,crtc,...}->reset() semantics are different
* Move the drm_atomic_private_obj_init() call back to
drm_bridge_attach()
* Check the presence of ->atomic_duplicate_state instead of
->atomic_reset in drm_atomic_add_encoder_bridges()
* Fix copy&paste errors in the atomic bridge state helpers doc
* Add A-b/R-b tags
v8:
* Move bridge state helpers out of the CONFIG_DEBUGFS section
v7:
* Move helpers, struct-defs, ... to atomic helper files to avoid the
drm -> drm_kms_helper -> drm circular dep
* Stop providing default implementation for atomic state reset,
duplicate and destroy hooks (has to do with the helper/core split)
* Drop all R-b/T-b as helpers have now be moved to other places
v6:
* Made helpers private, removed doc and moved them to satisfy dependencies
* Renamed helpers to _default_
v5:
* Re-introduced the helpers from v4
v4:
* Fix the doc
* Kill default helpers (inlined)
* Fix drm_atomic_get_bridge_state() to check for an ERR_PTR()
* Add Neil's R-b
v3:
* No changes
v2:
* Use drm_for_each_bridge_in_chain()
* Rename helpers to be more consistent with the rest of the DRM API
* Improve/fix the doc
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
|
||
|
|
7de3f1423f |
KVM: s390: Add new reset vcpu API
The architecture states that we need to reset local IRQs for all CPU resets. Because the old reset interface did not support the normal CPU reset we never did that on a normal reset. Let's implement an interface for the missing normal and clear resets and reset all local IRQs, registers and control structures as stated in the architecture. Userspace might already reset the registers via the vcpu run struct, but as we need the interface for the interrupt clearing part anyway, we implement the resets fully and don't rely on userspace to reset the rest. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-4-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> |
||
|
|
82b2c6ffd3 |
Merge branches 'pm-cpufreq' and 'pm-core'
* pm-cpufreq: cpufreq: Avoid creating excessively large stack frames * pm-core: PM: core: Fix handling of devices deleted during system-wide resume |
||
|
|
b45f1b3b58 |
Merge branch 'ttm-prot-fix' of git://people.freedesktop.org/~thomash/linux into drm-next
A small fix for the long-standing ttm vm page protection hack. Sent as a separate PR as it touches mm, has all acks in place. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellström (VMware) <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116102411.3056-1-thomas_os@shipmail.org |
||
|
|
ccaaaf6fe5 |
MPX requires recompiling applications, which requires compiler support.
Unfortunately, GCC 9.1 is expected to be be released without support for MPX. This means that there was only a relatively small window where folks could have ever used MPX. It failed to gain wide adoption in the industry, and Linux was the only mainstream OS to ever support it widely. Support for the feature may also disappear on future processors. This set completes the process that we started during the 5.4 merge window. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJeK1/pAAoJEGg1lTBwyZKwgC8QAIiVn1d7A9Uj/WpnpgfCChCZ 9XiV6Ak999qD9fbAcrgNfPjieaD4mtokocSRVJuRgJu5iLnIJCINlozLPe4yVl7P 7zebnxkLq0CIA8d56bEUoFlC0J+oWYlDVQePZzNQsSk5KHVGXVLpF6U4vDVzZeQy cprgvdeY+ehB7G6IIo0MWTg5ylKYAsOAyVvK8NIGpKY2k6/YqCnsptnsVE7bvlHy TrEOiUWLv+hh0bMkZdP1PwKQKEuMO/IZly0HtviFbMN7T4TB1spfg7ELoBucEq3T s4EVbYRe+nIE4tuEAveaX3CgxJek8cY5MlticskdaKSEACBwabdOF55qsZy0u+WA PYC4iUIXfbOH8OgieKWtGX4IuSkRYdQ2nP4BOpe4ZX4+zvU7zOCIyVSKRrwkX8cc ADtWI5FAtB36KCgUuWnHGHNZpOxPTbTLBuBataFY4Q2uBNJEBJpscZ5H9ObtyGFU ZjlzqFnM0nFNDKEI1EEtv9jLzgZTU1RQ46s7EFeSeEQ2/s9wJ3+s5sBlVbljsmus o658bLOEaRWC/aF15dgmEXW9GAO6uifNdmbzGnRn7oEMYyFQPTWbZvi1zGz58QaG Y6WTtigVtsSrHS4wpYd+p+n1W06VnB6J3BpBM4G1VQv1Vm0dNd1tUOfkqOzPjg7c 33Itmsz2LaW1mb67GlgZ =g4cC -----END PGP SIGNATURE----- Merge tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx Pull x86 MPX removal from Dave Hansen: "MPX requires recompiling applications, which requires compiler support. Unfortunately, GCC 9.1 is expected to be be released without support for MPX. This means that there was only a relatively small window where folks could have ever used MPX. It failed to gain wide adoption in the industry, and Linux was the only mainstream OS to ever support it widely. Support for the feature may also disappear on future processors. This set completes the process that we started during the 5.4 merge window when the MPX prctl()s were removed. XSAVE support is left in place, which allows MPX-using KVM guests to continue to function" * tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx: x86/mpx: remove MPX from arch/x86 mm: remove arch_bprm_mm_init() hook x86/mpx: remove bounds exception code x86/mpx: remove build infrastructure x86/alternatives: add missing insn.h include |
||
|
|
35c222fd32 |
MTD core
* block2mtd: page index should use pgoff_t * maps: physmap: minimal Runtime PM support * maps: pcmciamtd: avoid possible sleep-in-atomic-context bugs * concat: Fix a comment referring to an unknown symbol Raw NAND * Macronix: Use match_string() helper * Atmel: switch to using devm_fwnode_gpiod_get() * Denali: rework the SKIP_BYTES feature and add reset controlling * Brcmnand: set appropriate DMA mask * Cadence: add unspecified HAS_IOMEM dependency * Various cleanup. Onenand * Rename Samsung and Omap2 drivers to avoid possible build warnings * Enable compile testing * Various build issues * Kconfig cleanup SPI-NAND * Support for Toshiba TC58CVG2S0HRAIJ SPI-NOR: - Add support for TB selection using SR bit 6, - Add support for few flashes. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl4zMfgACgkQJWrqGEe9 VoS0xwf+KdaihRno4SkDovcHoF7K54N6CqBhwuV9uabfy4phEr38cyvaivYu0rG7 k/n3CUNRDghTh7DAUT7pBsjUeZn9XxvKyQaZz34TBgoQYwGz57ssp8lMRmJkYoA6 t9z95N9bRJ+IzZJlYELCbhNq+aOGyWYgWL+aaO0CE8OyOeWzdZumdd4k7cF7rSAu 9gWV/6iX/qP081NexfjPEVmMtNQ+0p4T7zQ01nQA7rIZiVoIgMKwBu41aRYycEEs LeuV5gNEDn2vGBl+u85w5oF6o1TIzDeTmh0G7Jm3NQGGco2kOOZ1O39a0hrDONrA hEoEIG/rAMKOtaLr6rCGnV/5/i/Tlw== =WC+m -----END PGP SIGNATURE----- Merge tag 'mtd/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core - block2mtd: page index should use pgoff_t - maps: physmap: minimal Runtime PM support - maps: pcmciamtd: avoid possible sleep-in-atomic-context bugs - concat: Fix a comment referring to an unknown symbol Raw NAND: - Macronix: Use match_string() helper - Atmel: switch to using devm_fwnode_gpiod_get() - Denali: rework the SKIP_BYTES feature and add reset controlling - Brcmnand: set appropriate DMA mask - Cadence: add unspecified HAS_IOMEM dependency - Various cleanup. Onenand: - Rename Samsung and Omap2 drivers to avoid possible build warnings - Enable compile testing - Various build issues - Kconfig cleanup SPI-NAND: - Support for Toshiba TC58CVG2S0HRAIJ SPI-NOR: - Add support for TB selection using SR bit 6, - Add support for few flashes" * tag 'mtd/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits) mtd: concat: Fix a comment referring to an unknown symbol mtd: rawnand: add unspecified HAS_IOMEM dependency mtd: block2mtd: page index should use pgoff_t mtd: maps: physmap: Add minimal Runtime PM support mtd: maps: pcmciamtd: fix possible sleep-in-atomic-context bugs in pcmciamtd_set_vpp() mtd: onenand: Rename omap2 driver to avoid a build warning mtd: onenand: Use a better name for samsung driver mtd: rawnand: atmel: switch to using devm_fwnode_gpiod_get() mtd: spinand: add support for Toshiba TC58CVG2S0HRAIJ mtd: rawnand: macronix: Use match_string() helper to simplify the code mtd: sharpslpart: Fix unsigned comparison to zero mtd: onenand: Enable compile testing of OMAP and Samsung drivers mtd: onenand: samsung: Fix printing format for size_t on 64-bit mtd: onenand: samsung: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bit mtd: rawnand: denali: remove hard-coded DENALI_DEFAULT_OOB_SKIP_BYTES mtd: rawnand: denali_dt: add reset controlling dt-bindings: mtd: denali_dt: document reset property mtd: rawnand: denali_dt: Add support for configuring SPARE_AREA_SKIP_BYTES mtd: rawnand: denali_dt: error out if platform has no associated data mtd: rawnand: brcmnand: Set appropriate DMA mask ... |
||
|
|
6e135baed8 |
f2fs-for-5.6
In this series, we've implemented transparent compression experimentally. It supports LZO and LZ4, but will add more later as we investigate in the field more. At this point, the feature doesn't expose compressed space to user directly in order to guarantee potential data updates later to the space. Instead, the main goal is to reduce data writes to flash disk as much as possible, resulting in extending disk life time as well as relaxing IO congestion. Alternatively, we're also considering to add ioctl() to reclaim compressed space and show it to user after putting the immutable bit. Enhancement: - add compression support - avoid unnecessary locks in quota ops - harden power-cut scenario for zoned block devices - use private bio_set to avoid IO congestion - replace GC mutex with rwsem to serialize callers Bug fix: - fix dentry consistency and memory corruption in rename()'s error case - fix wrong swap extent reports - fix casefolding bugs - change lock coverage to avoid deadlock - avoid GFP_KERNEL under f2fs_lock_op And, we've cleaned up sysfs entries to prepare no debugfs. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl4zInwACgkQQBSofoJI UNL4Tg/+JBbVEFa3IUBGMdbjfgd/g0Jye++iMAYYGRWT6Ll/IGcHRV9NunITjgWU mBZqdhI28kXeiGCcewB1ZvivjLx22X4n6yevHk2B5A6PNe9IDCHi0HOAhJJHkjPH ecv2L+vX3Oj4y0+H7JNz9Fo3OIPJvMPtCQWlg1z+VQyhB85zNP7fZlvvIY4tG8yw ERo0YNotLqwcF1BxCwNbAhV3aJGDxar+MI//yNzpiwDX7IptVpqestfcoIYc9kKL 4kSWRyEIGwcuIeyoM6aofGS9t4Z/Oe/gdqcxNr6l5n0Q/tMTpb4b/fJFGNr6RRx9 X9NQo8flkQb2DEIOP0DVpO2aPebzsVtzg3LZUOLA83+wCHfwINtHai2Dy2zDJ2my BrVdou8fe2oxoaYihJg/Tz9cd0nA/6mZArtpYvDImAmX/xuGOvVk9zZkXNwc9nVX EyVzy0vW4lA6gAIJ95aG6DDhJcAtVoy0MhBRWG92Pufxhn9aW24AV63ChWUf9DRx /3RqpMAuQ3UC2gOxXKKnr54lsdhUIMn/y9sjROkVvQ1BvgRVxO8I4GFvMHMKv9pR 9KXiVRdzyYERyoL4+MF7A2zTnw+RHL4RVILa85p2ALGy2jQ1UuNUQi0BN9x2u1v8 S1ifNNX8SwOP+83ImFJhhn3HybpFQ45aLO3F7ZjKBQAnufJu+xw= =zeoY -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this series, we've implemented transparent compression experimentally. It supports LZO and LZ4, but will add more later as we investigate in the field more. At this point, the feature doesn't expose compressed space to user directly in order to guarantee potential data updates later to the space. Instead, the main goal is to reduce data writes to flash disk as much as possible, resulting in extending disk life time as well as relaxing IO congestion. Alternatively, we're also considering to add ioctl() to reclaim compressed space and show it to user after putting the immutable bit. Enhancements: - add compression support - avoid unnecessary locks in quota ops - harden power-cut scenario for zoned block devices - use private bio_set to avoid IO congestion - replace GC mutex with rwsem to serialize callers Bug fixes: - fix dentry consistency and memory corruption in rename()'s error case - fix wrong swap extent reports - fix casefolding bugs - change lock coverage to avoid deadlock - avoid GFP_KERNEL under f2fs_lock_op And, we've cleaned up sysfs entries to prepare no debugfs" * tag 'f2fs-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (31 commits) f2fs: fix race conditions in ->d_compare() and ->d_hash() f2fs: fix dcache lookup of !casefolded directories f2fs: Add f2fs stats to sysfs f2fs: delete duplicate information on sysfs nodes f2fs: change to use rwsem for gc_mutex f2fs: update f2fs document regarding to fsync_mode f2fs: add a way to turn off ipu bio cache f2fs: code cleanup for f2fs_statfs_project() f2fs: fix miscounted block limit in f2fs_statfs_project() f2fs: show the CP_PAUSE reason in checkpoint traces f2fs: fix deadlock allocating bio_post_read_ctx from mempool f2fs: remove unneeded check for error allocating bio_post_read_ctx f2fs: convert inline_dir early before starting rename f2fs: fix memleak of kobject f2fs: fix to add swap extent correctly f2fs: run fsck when getting bad inode during GC f2fs: support data compression f2fs: free sysfs kobject f2fs: declare nested quota_sem and remove unnecessary sems f2fs: don't put new_page twice in f2fs_rename ... |
||
|
|
e5da4c933c |
This merge window, we've added some performance improvements in how we
handle inode locking in the read/write paths, and improving the performance of Direct I/O overwrites. We also now record the error code which caused the first and most recent ext4_error() report in the superblock, to make it easier to root cause problems in production systems. There are also many of the usual cleanups and miscellaneous bug fixes. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl4yBf0ACgkQ8vlZVpUN gaOK8Af9EsY1vyR/IvEosfXJoKIqnTXN1SLt94iAOUh6dNeVNcyv1SIzRGFrpmsg uHY02EkcTl68b/AjV7ieDpOnOSmlP7NzynuVoar2hrjKX0MzpEu03Vv1a3dUQKuU zcdchi83EwRjEvegsNK/VF3FFadk3TtC7x+7o6p840V6OAyp5CXhjm1akJqIJwvd A4gTpruTSRIFg6Jj36HEDNRgSAeILed3wC7Ywtxt51tLK7Lp/qB1EuvYodMQRvGz d0fRhbNHKepVYfxwpDUDMFnrqDPZ/SZGF73XBxP2zHd6SXy9dBLzGsRL+oj9tTUg YQJtt4Yxjjg8Q1UrMyMRzQpi4S8dAQ== =pVeR -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "This merge window, we've added some performance improvements in how we handle inode locking in the read/write paths, and improving the performance of Direct I/O overwrites. We also now record the error code which caused the first and most recent ext4_error() report in the superblock, to make it easier to root cause problems in production systems. There are also many of the usual cleanups and miscellaneous bug fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (49 commits) jbd2: clean __jbd2_journal_abort_hard() and __journal_abort_soft() jbd2: make sure ESHUTDOWN to be recorded in the journal superblock ext4, jbd2: ensure panic when aborting with zero errno jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record jbd2_seq_info_next should increase position index jbd2: remove pointless assertion in __journal_remove_journal_head ext4,jbd2: fix comment and code style jbd2: delete the duplicated words in the comments ext4: fix extent_status trace points ext4: fix symbolic enum printing in trace output ext4: choose hardlimit when softlimit is larger than hardlimit in ext4_statfs_project() ext4: fix race conditions in ->d_compare() and ->d_hash() ext4: make dioread_nolock the default ext4: fix extent_status fragmentation for plain files jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal ext4: drop ext4_kvmalloc() ext4: Add EXT4_IOC_FSGETXATTR/EXT4_IOC_FSSETXATTR to compat_ioctl ext4: remove unused macro MPAGE_DA_EXTENT_TAIL ext4: add missing braces in ext4_ext_drop_refs() ext4: fix some nonstandard indentation in extents.c ... |
||
|
|
8889f6fa35 |
RDMA/core: Make the entire API tree static
Compilation of mlx5 driver without CONFIG_INFINIBAND_USER_ACCESS generates
the following error.
on x86_64:
ld: drivers/infiniband/hw/mlx5/main.o: in function `mlx5_ib_handler_MLX5_IB_METHOD_VAR_OBJ_ALLOC':
main.c:(.text+0x186d): undefined reference to `ib_uverbs_get_ucontext_file'
ld: drivers/infiniband/hw/mlx5/main.o:(.rodata+0x2480): undefined reference to `uverbs_idr_class'
ld: drivers/infiniband/hw/mlx5/main.o:(.rodata+0x24d8): undefined reference to `uverbs_destroy_def_handler'
This is happening because some parts of the UAPI description are not
static. This is a hold over from earlier code that relied on struct
pointers to refer to object types, now object types are referenced by
number. Remove the unused globals and add statics to the remaining UAPI
description elements.
Remove the redundent #ifdefs around mlx5_ib_*defs and obsolete
mlx5_ib_get_devx_tree().
The compiler now trims alot more unused code, including the above
problematic definitions when !CONFIG_INFINIBAND_USER_ACCESS.
Fixes:
|