Commit graph

121,030 commits

Author SHA1 Message Date
Lukas Bulwahn
048ae7e8b5 fmc: remove left-over ipmi-fru.h after fmc deletion
Commit 6a80b30086 ("fmc: Delete the FMC subsystem") from Linus Walleij
deleted the obsolete FMC subsystem, but missed the MAINTAINERS entry and
include/linux/ipmi-fru.h mentioned in the MAINTAINERS entry.

Later, commit d5d4aa1ec1 ("MAINTAINERS: Remove FMC subsystem") from
Denis Efremov cleaned up the MAINTAINERS entry, but actually also missed
that include/linux/ipmi-fru.h should also be deleted while deleting its
reference in MAINTAINERS.

So, deleting include/linux/ipmi-fru.h slipped through the previous
clean-ups.

As there is no further use for include/linux/ipmi-fru.h, finally delete
include/linux/ipmi-fru.h for good now.

Fixes: d5d4aa1ec1 ("MAINTAINERS: Remove FMC subsystem")
Fixes: 6a80b30086 ("fmc: Delete the FMC subsystem")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20191214114913.8610-1-lukas.bulwahn@gmail.com
Acked-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07 13:37:10 +01:00
Dhinakaran Pandiyan
a7007efa67 drm/fb: Extend format_info member arrays to handle four planes
addfb() uAPI has supported four planes for a while now, make format_info
compatible with that.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-7-imre.deak@intel.com
2020-01-07 13:16:08 +02:00
Dhinakaran Pandiyan
0d3d29d0f8 drm/framebuffer: Format modifier for Intel Gen-12 media compression
Gen-12 display can decompress surfaces compressed by the media engine, add
a new modifier as the driver needs to know the surface was compressed by
the media or render engine.

v2: Update code comment describing the color plane order for YUV
    semiplanar formats.

Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-6-imre.deak@intel.com
2020-01-07 13:15:48 +02:00
Bartosz Golaszewski
06863620ed gpiolib: convert the type of hwnum to unsigned int in gpiochip_get_desc()
gpiochip_get_desc() takes a u16 hwnum, but it turns out most users don't
respect that and usually pass an unsigned int. Since implicit casting to
a smaller type is dangerous - let's change the type of hwnum to unsigned
int in gpiochip_get_desc() and in gpiochip_request_own_desc() where the
size of hwnum is not respected either and who's a user of the former.

This is safe as we then check the hwnum against the number of lines
before proceeding in gpiochip_get_desc().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07 12:03:28 +01:00
Thomas Zimmermann
a4d46a8e26 drm/vram-helper: Remove BO device from public interface
TTM is an implementation detail of the VRAM helpers and therefore
shouldn't be exposed to the callers. There's only one correct value
for the BO device anyway, which is the one stored in the DRM device.

So remove struct ttm_bo_device from the VRAM-helper interface and
use the device's VRAM manager unconditionally. The GEM initializer
function fails if the VRAM manager has not been initialized.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-8-tzimmermann@suse.de
2020-01-07 11:53:19 +01:00
Thomas Zimmermann
ebe9428b3f drm/vram-helper: Remove interruptible flag from public interface
The flag 'interruptible', which is passed to various functions,
is always set to be false. Remove it and hard-code the value.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-7-tzimmermann@suse.de
2020-01-07 11:53:19 +01:00
Martin Blumenstingl
64c76b3177 clk: clarify that clk_set_rate() does updates from top to bottom
clk_set_rate() currently starts updating the rate for a clock at the
top-most affected clock and then walks down the tree to update the
bottom-most affected clock last.
This behavior is important for protected clocks where we can switch
between multiple parents to achieve the same output.

An example for this is the mali clock tree on Amlogic SoCs:
  mali_0_mux (must not change when enabled)
    mali_0_div (must not change when enabled)
     mali_0 (gate)
  mali_1_mux (must not change when enabled)
    mali_1_div (must not change when enabled)
      mali_1 (gate)
The final output can either use mali_0_gate or mali_1. To change the
final output we must switch to the "inactive" tree. Assuming mali_0 is
active, then we need to prepare mali_1 with the new desired rate and
finally switch the output to the mali_1 tree. This process will then
protect the mali_1 tree and at the same time unprotect the mali_0 tree.
The next call to clk_set_rate() will then switch from the mali_1 tree
back to mali_0.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2020-01-07 11:31:47 +01:00
Boris Brezillon
e351e4d5ea drm/bridge: Add the necessary bits to support bus format negotiation
drm_bridge_state is extended to describe the input and output bus
configurations. These bus configurations are exposed through the
drm_bus_cfg struct which encodes the configuration of a physical
bus between two components in an output pipeline, usually between
two bridges, an encoder and a bridge, or a bridge and a connector.

The bus configuration is stored in drm_bridge_state separately for
the input and output buses, as seen from the point of view of each
bridge. The bus configuration of a bridge output is usually identical
to the configuration of the next bridge's input, but may differ if
the signals are modified between the two bridges, for instance by an
inverter on the board. The input and output configurations of a
bridge may differ if the bridge modifies the signals internally,
for instance by performing format conversion, or*modifying signals
polarities.

Bus format negotiation is automated by the core, drivers just have
to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they
want to take part to this negotiation. Negotiation happens in reverse
order, starting from the last element of the chain (the one directly
connected to the display) up to the first element of the chain (the one
connected to the encoder).
During this negotiation all supported formats are tested until we find
one that works, meaning that the formats array should be in decreasing
preference order (assuming the driver has a preference order).

Note that the bus format negotiation works even if some elements in the
chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks.
In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets
the previous bridge element decide what to do (most of the time, bridge
drivers will pick a default bus format or extract this piece of
information from somewhere else, like a FW property).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-5-narmstrong@baylibre.com
2020-01-07 10:11:34 +01:00
Boris Brezillon
b86d895524 drm/bridge: Add an ->atomic_check() hook
So that bridge drivers have a way to check/reject an atomic operation.
The drm_atomic_bridge_chain_check() (which is just a wrapper around
the ->atomic_check() hook) is called in place of
drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented,
the core falls back on ->mode_fixup(), so the behavior should stay
the same for existing bridge drivers).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-4-narmstrong@baylibre.com
2020-01-07 10:11:15 +01:00
Boris Brezillon
f7619a58ef drm/bridge: Patch atomic hooks to take a drm_bridge_state
This way the drm_bridge_funcs interface is consistent with the rest of
the subsystem.

The only driver implementing those hooks (analogix DP) is patched too.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-3-narmstrong@baylibre.com
2020-01-07 10:10:59 +01:00
Boris Brezillon
6ed7e9625f drm/bridge: Add a drm_bridge_state object
One of the last remaining objects to not have its atomic state.

This is being motivated by our attempt to support runtime bus-format
negotiation between elements of the bridge chain.
This patch just paves the road for such a feature by adding a new
drm_bridge_state object inheriting from drm_private_obj so we can
re-use some of the existing state initialization/tracking logic.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-2-narmstrong@baylibre.com
2020-01-07 10:10:49 +01:00
Georgi Djakov
ebb37bd064 dt-bindings: interconnect: Add Qualcomm MSM8916 DT bindings
The Qualcomm MSM8916 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-07 09:30:09 +02:00
Stephen Boyd
194efb6e26 clk: gate: Add support for specifying parents via DT/pointers
After commit fc0c209c14 ("clk: Allow parents to be specified without
string names") we can use DT or direct clk_hw pointers to specify
parents. Create a generic function that shouldn't be used very often to
encode the multitude of ways of registering a gate clk with different
parent information. Then add a bunch of wrapper macros that only pass
down what needs to be passed down to the generic function to support
this with less arguments.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-12-sboyd@kernel.org
2020-01-06 23:10:12 -08:00
Stephen Boyd
9611b3aacc clk: mux: Add support for specifying parents via DT/pointers
After commit fc0c209c14 ("clk: Allow parents to be specified without
string names") we can use DT or direct clk_hw pointers to specify
parents. Create a generic function that shouldn't be used very often to
encode the multitude of ways of registering a mux clk with different
parent information. Then add a bunch of wrapper macros that only pass
down what needs to be passed down to the generic function to support
this with less arguments.

Note: the msm drm driver passes an anonymous array through the macro
which seems to confuse my compiler. Adding a parenthesis around the
whole thing at the call site seems to fix it but it must be wrong. Maybe
it's better to split this patch and pick out the array bits there?

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-11-sboyd@kernel.org
2020-01-06 23:10:05 -08:00
Stephen Boyd
1f1bb96d3a clk: fixed-rate: Document that accuracy isn't a rate
This kernel-doc talks about a rate for the accuracy. That's wrong.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-9-sboyd@kernel.org
2020-01-06 23:08:16 -08:00
Stephen Boyd
58f0c4ba56 clk: fixed-rate: Add clk flags for parent accuracy
Some clk providers want to use the accuracy of the parent clk and use
the fixed rate basic type clk to do that. This requires getting the
parent clk and extracting the accuracy before registering the fixed rate
clk. Let's add a flag for this and update the clk_ops to support this.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-8-sboyd@kernel.org
2020-01-06 23:07:34 -08:00
Linus Torvalds
ae6088216c Various tracing fixes:
- kbuild found missing define of MCOUNT_INSN_SIZE for various build configs
  - Initialize variable to zero as gcc thinks it is used undefined
     (it really isn't but the code is subtle enough that this doesn't hurt)
  - Convert from do_div() to div64_ull() to prevent potential divide by zero
  - Unregister a trace point on error path in sched_wakeup tracer
  - Use signed offset for archs that can have stext not be first
  - A simple indentation fix (whitespace error)
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXhOj6xQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qukzAQCMNfkAbMFA+C1uORMhr/jWhi4eshWN
 4jZ2u5X8zGuuXQD+PaQU4n8d0K4uCPF+lFD16DfFxXvCOXHfN3/zXmxGvw8=
 =djaW
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Various tracing fixes:

   - kbuild found missing define of MCOUNT_INSN_SIZE for various build
     configs

   - Initialize variable to zero as gcc thinks it is used undefined (it
     really isn't but the code is subtle enough that this doesn't hurt)

   - Convert from do_div() to div64_ull() to prevent potential divide by
     zero

   - Unregister a trace point on error path in sched_wakeup tracer

   - Use signed offset for archs that can have stext not be first

   - A simple indentation fix (whitespace error)"

* tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix indentation issue
  kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
  tracing: Change offset type to s32 in preempt/irq tracepoints
  ftrace: Avoid potential division by zero in function profiler
  tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
  tracing: Define MCOUNT_INSN_SIZE when not defined without direct calls
  tracing: Initialize val to zero in parse_entry of inject code
2020-01-06 15:38:38 -08:00
Krzysztof Kozlowski
5adcb8b186 net: ethernet: sxgbe: Rename Samsung to lowercase
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
name.

"SAMSUNG" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 13:33:14 -08:00
Linus Torvalds
ec7b3f5372 spi: Fixes for v5.5
A small collection of fixes here, one to make the newly added PTP
 timestamping code more accurate, a few driver fixes and a fix for the
 core DT binding to document the fact that we support eight wire buses.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4TMdwTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0M5UB/9w0mzrmuaJzctm3Jm8LiCIjJoZ0woQ
 chgbhm2C/I6idENxdUhaJ1YZMI6NkmJKpJy5tQ/QH4MnbOVT/vHIEmIsRYO0vYoF
 ApERJLia8da1OpiJlPTbsg3eUXVNmPMVeAkq5MgKSflaIjV6Ejc0FRWmgDYvzhu9
 xkCsptAF7MYPUuHdBcjXPscSf1/w+FdDy8VYncEluyJ0NpGDU64N/XdTwRmsG8QW
 BxA1jPPKi445NsC+OV8SFfNZbeEXG2iSEBPvp4tMGtd0TiIp3UNLTRzMstEFE6SD
 hCzL9fQEzUgHD+B0vLmccyy0HR0phk6813jf9KeToAjAxKtf5XhQajW+
 =Ad4n
 -----END PGP SIGNATURE-----

Merge tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A small collection of fixes here, one to make the newly added PTP
  timestamping code more accurate, a few driver fixes and a fix for the
  core DT binding to document the fact that we support eight wire buses"

* tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Document Octal mode as valid SPI bus width
  spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
  spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode
  spi: Don't look at TX buffer for PTP system timestamping
  spi: uniphier: Fix FIFO threshold
2020-01-06 12:34:44 -08:00
Linus Torvalds
b967793c96 RTC fixes for 5.5
- cmos: revert AltCentury support on AMD/Hygon
  - mt6397: fix alarm register overwrite
  - sun6i: ensure clock is working on R40
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl4SecUACgkQ2wIijOdR
 NOV+9BAAmgkn7E1l1vc2JHfeb/X0WS3X5nfOhKl021EbZpoo2U44TCB3onCy3E/p
 eWwQ3nrG1u3mzgv6/7+MWkIkJFxVwTLBrNgh/NW8S1/GBCqVEuwnJlSUEguKXB+R
 5nn3mdtJTEKb5aopSXvmO53YRr6YytGn5o9hZwv6bQCkHB3IFYH4H4gZgR2FZEvI
 i+uYXCkWtlXHuE6g4jrDx6LUNEKPauGMoL6+i93lDtkJMTm4B/nAOXbPNWpwmx6H
 uidq0rlLMHPWYRCpn81jJ8n0eN87/kS3ozNWTgaFH27cRVrW61KHSWe2j7yl+FCq
 Yc+ETNuDetNAMPRfcJmvo1xrd+bR7CFV7eSBvvHmVQCltIWqEyj1Lc6xQJnAhnDx
 b3LfKvTAcrjeR6YwqyahWsZ4gJAhhDASoxsOZE0seKEl4v0DepOj5BD9iKg1WEkP
 M7+oMeT4z7Z+jcYVv36GpBkrTKjPJzcsRHYNjrx84UWm3G3FDZVC2586CMmgYvyO
 cDWFWBqOOGq+39YfFCH/mejLwCsXjOkbfOfnpfJIXe8n+ozwtyzAVG4tsfEVrM7B
 zkIDE3M+/IrGPheeP3ugDkQeSnwKC0t5uExH38Q6uDVFsv7PjqJD1Ry7fyR5X0VL
 HjeBEpxUYBGpixIv5qNIqMIVPX1tDJ8v48kE8jWHEW1jJkb/DqI=
 =3S3X
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC fixes from Alexandre Belloni:
 "A few fixes for this cycle. The CMOS AltCentury support broke a few
  platforms with a recent BIOS so I reverted it. The mt6397 fix is not
  that critical but good to have. And finally, the sun6i fix repairs
  WiFi and BT on a few platforms.

  Summary:

   - cmos: revert AltCentury support on AMD/Hygon

   - mt6397: fix alarm register overwrite

   - sun6i: ensure clock is working on R40"

* tag 'rtc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"
  rtc: mt6397: fix alarm register overwrite
  rtc: sun6i: Add support for RTC clocks on R40
2020-01-06 10:46:43 -08:00
Lubomir Rintel
247aa9e4d2 dt-bindings: marvell,mmp2: Add clock ids for the HSIC clocks
There are two USB HSIC controllers on MMP2 and MMP3.

Link: https://lore.kernel.org/r/20191220065314.237624-2-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06 09:33:12 -08:00
Olof Johansson
965af1cfbb ARM SCMI updates for v5.6
1. Addition of multiple device support per protocol to enable use of
    some procotols by multiple kernel subsystems simultaneously and
    corresponding updates to the existing scmi drivers
 2. Addition of trace events around the scmi transfer code to measure
    any delays and capture anomalies that can also be used during
    investigation of some platform firmware related issues
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAl4J8IgACgkQAEG6vDF+
 4pipkxAAj2Unbr9epBk08ffLZ9GXCNzCbzOcEoxKCYY1qBnmX04EROj3Ke29lDEj
 ai9JeXRAQWbzO4VjopwgNSmNU0rQxpp0dJ/1GHWbL87dDFz40Qppm6d0PwwowCnX
 LI1gTvvDC7SPq0ev4x7iW/E4smyQsRkDS/nAuF4dgTxvk0TMxo70M2r6lRtnjnlW
 nTtOwOYXrorJ+a70oz9VwV+UAI/b9F+HGtCFTifQgwWrLSGBacrIAUswD2WOve4l
 aVK6jHtiC6VXR1Uomllps8lGXF0GjAr/OwBvIMsortT7kIulpYw5S4GHzEs8AHJX
 olpxxNtJHSMuWIkPjUUxHSJKILS9eKCiDntQJw1o9buv/Vx2YBwlqoJEx5Wlof6O
 LzRlCJtHh0YlfZ7I0SClQYcyDGesJifoY24uGExr74AfsAIR8R6zhIlKQUtme5DJ
 baQvFDFEkf70ii8xutOEOXTENi+9851XN+MB0P2qT7LOxGTo1pJS1XGk3o0bBDu7
 Hz8B18ClwRm3Wj51Ttn4aUOOS6sM6+EnhBJ9sSJMDjLw0E4vAA0/JmsNm9OlMXkQ
 rm2oYYuaqO+DOMj26LrePWWq29hQp+pSJredFeZk9YS6heU0/chxQUMHOVbKoRqe
 sTuJi3R2Lu94NXOUumRSvMLT9TDfCIoqlWW/PfwZq2PJl12CZe8=
 =2CXP
 -----END PGP SIGNATURE-----

Merge tag 'scmi-updates-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers

ARM SCMI updates for v5.6

1. Addition of multiple device support per protocol to enable use of
   some procotols by multiple kernel subsystems simultaneously and
   corresponding updates to the existing scmi drivers
2. Addition of trace events around the scmi transfer code to measure
   any delays and capture anomalies that can also be used during
   investigation of some platform firmware related issues

* tag 'scmi-updates-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  drivers: firmware: scmi: Extend SCMI transport layer by trace events
  include: trace: Add SCMI header with trace events
  reset: reset-scmi: Match scmi device by both name and protocol id
  hwmon: (scmi-hwmon) Match scmi device by both name and protocol id
  cpufreq: scmi: Match scmi device by both name and protocol id
  clk: scmi: Match scmi device by both name and protocol id
  firmware: arm_scmi: Skip protocol initialisation for additional devices
  firmware: arm_scmi: Stash version in protocol init functions
  firmware: arm_scmi: Match scmi device by both name and protocol id
  firmware: arm_scmi: Add versions and identifier attributes using dev_groups
  firmware: arm_scmi: Add names to scmi devices created
  firmware: arm_scmi: Skip scmi mbox channel setup for addtional devices
  firmware: arm_scmi: Add support for multiple device per protocol

Link: https://lore.kernel.org/r/20191230182956.GA29349@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-06 09:23:06 -08:00
Masahiro Yamada
8b41fc4454 kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf
Commit bc081dd6e9 ("kbuild: generate modules.builtin") added
infrastructure to generate modules.builtin, the list of all
builtin modules.

Basically, it works like this:

  - Kconfig generates include/config/tristate.conf, the list of
    tristate CONFIG options with a value in a capital letter.

  - scripts/Makefile.modbuiltin makes Kbuild descend into
    directories to collect the information of builtin modules.

I am not a big fan of it because Kbuild ends up with traversing
the source tree twice.

I am not sure how perfectly it should work, but this approach cannot
avoid false positives; even if the relevant CONFIG option is tristate,
some Makefiles forces obj-m to obj-y.

Some examples are:

  arch/powerpc/platforms/powermac/Makefile:
    obj-$(CONFIG_NVRAM:m=y)         += nvram.o

  net/ipv6/Makefile:
    obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o

  net/netlabel/Makefile:
    obj-$(subst m,y,$(CONFIG_IPV6)) += netlabel_calipso.o

Nobody has complained about (or noticed) it, so it is probably fine to
have false positives in modules.builtin.

This commit simplifies the implementation. Let's exploit the fact
that every module has MODULE_LICENSE(). (modpost shows a warning if
MODULE_LICENSE is missing. If so, 0-day bot would already have blocked
such a module.)

I added MODULE_FILE to <linux/module.h>. When the code is being compiled
as builtin, it will be filled with the file path of the module, and
collected into modules.builtin.info. Then, scripts/link-vmlinux.sh
extracts the list of builtin modules out of it.

This new approach fixes the false-positives above, but adds another
type of false-positives; non-modular code may have MODULE_LICENSE()
by mistake. This is not a big deal, it is just the code is always
orphan. We can clean it up if we like. You can see cleanup examples by:

  $ git log --grep='make.* explicitly non-modular'

To sum up, this commits deletes lots of code, but still produces almost
equivalent results. Please note it does not increase the vmlinux size at
all. As you can see in include/asm-generic/vmlinux.lds.h, the .modinfo
section is discarded in the link stage.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-07 02:18:39 +09:00
Andreas Gruenbacher
243145bc43 fs: Fix page_mkwrite off-by-one errors
The check in block_page_mkwrite that is meant to determine whether an
offset is within the inode size is off by one.  This bug has been copied
into iomap_page_mkwrite and several filesystems (ubifs, ext4, f2fs,
ceph).

Fix that by introducing a new page_mkwrite_check_truncate helper that
checks for truncate and computes the bytes in the page up to EOF.  Use
the helper in iomap.

NOTE from Darrick: The original patch fixed a number of filesystems, but
then there were merge conflicts with the f2fs for-next tree; a
subsequent re-submission of the patch had different btrfs changes with
no explanation; and Christoph complained that each per-fs fix should be
a separate patch.  In my view that's too much risk to take on, so I
decided to drop all the hunks except for iomap, since I've actually QA'd
XFS.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: drop everything but the iomap parts]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-06 08:58:23 -08:00
Thomas Zimmermann
9870732786 drm/vram: Support scanline alignment for dumb buffers
Adding the pitch alignment as an argument to
drm_gem_vram_fill_create_dumb() allows to align scanlines to certain
offsets. A value of 0 disables scanline pitches.

v3:
	* only do power-of-2 test if pitch_align given; fails otherwise
	* mgag200: call drm_gem_vram_fill_create_dumb() with pitch_align
v2:
	* split of patch from related hibmc changes
	* test if scanline pitch is power of 2

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-4-tzimmermann@suse.de
2020-01-06 13:46:03 +01:00
Maarten Lankhorst
22164fbe27 Merge drm/drm-next into drm-misc-next
Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-01-06 10:35:33 +01:00
Pablo Neira Ayuso
fb46f1b780 netfilter: flowtable: add nf_flowtable_time_stamp
This patch adds nf_flowtable_time_stamp and updates the existing code to
use it.

This patch is also implicitly fixing up hardware statistic fetching via
nf_flow_offload_stats() where casting to u32 is missing. Use
nf_flow_timeout_delta() to fix this.

Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: wenxu <wenxu@ucloud.cn>
2020-01-06 10:30:46 +01:00
Christoph Hellwig
4bdc0d676a remove ioremap_nocache and devm_ioremap_nocache
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-06 09:45:59 +01:00
Krzysztof Kozlowski
a6a0bc7ca9 firmware: scm: Add stubs for OCMEM and restore_sec_cfg_available
Add few more stubs (for OCMEM-related functions and
qcom_scm_restore_sec_cfg_available()) in case of !CONFIG_QCOM_SCM.
These are actually not necessary for builds but provide them for
completeness.

Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200103220825.28710-1-krzk@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-06 00:31:31 -08:00
Vladimir Oltean
964ee5c82b net: mscc: ocelot: export ANA, DEV and QSYS registers to include/soc/mscc
Since the Felix DSA driver is implementing its own PHYLINK instance due
to SoC differences, it needs access to the few registers that are
common, mainly for flow control.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 23:22:33 -08:00
Vladimir Oltean
ee50d07c9f net: mscc: ocelot: make phy_mode a member of the common struct ocelot_port
The Ocelot switchdev driver and the Felix DSA one need it for different
reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is
integrated with the traditional NXP Layerscape PCS design which does not
support runtime configuration of SerDes protocol. So it needs to
pre-validate the phy-mode from the device tree and prevent PHYLINK from
attempting to change it. For this, it needs to cache it in a private
variable.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 23:22:33 -08:00
Claudiu Manoil
6517798dd3 enetc: Make MDIO accessors more generic and export to include/linux/fsl
Within the LS1028A SoC, the register map for the ENETC MDIO controller
is instantiated a few times: for the central (external) MDIO controller,
for the internal bus of each standalone ENETC port, and for the internal
bus of the Felix switch.

Refactoring is needed to support multiple MDIO buses from multiple
drivers. The enetc_hw structure is made an opaque type and a smaller
enetc_mdio_priv is created.

'mdio_base' - MDIO registers base address - is being parameterized, to
be able to work with different MDIO register bases.

The ENETC MDIO bus operations are exported from the fsl-enetc-mdio
kernel object, the same that registers the central MDIO controller (the
dedicated PF). The ENETC main driver has been changed to select it, and
use its exported helpers to further register its private MDIO bus. The
DSA Felix driver will do the same.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 23:22:32 -08:00
Vladimir Oltean
787cac3f5a net: dsa: Pass pcs_poll flag from driver to PHYLINK
The DSA drivers that implement .phylink_mac_link_state should normally
register an interrupt for the PCS, from which they should call
phylink_mac_change(). However not all switches implement this, and those
who don't should set this flag in dsa_switch in the .setup callback, so
that PHYLINK will poll for a few ms until the in-band AN link timer
expires and the PCS state settles.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 23:22:32 -08:00
Vladimir Oltean
1511ed0a01 net: phylink: add support for polling MAC PCS
Some MAC PCS blocks are unable to provide interrupts when their status
changes. As we already have support in phylink for polling status, use
this to provide a hook for MACs to enable polling mode.

The patch idea was picked up from Russell King's suggestion on the macb
phylink patch thread here [0] but the implementation was changed.
Instead of introducing a new phylink_start_poll() function, which would
make the implementation cumbersome for common PHYLINK implementations
for multiple types of devices, like DSA, just add a boolean property to
the phylink_config structure, which is just as backwards-compatible.

https://lkml.org/lkml/2019/12/16/603

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 23:22:32 -08:00
Vladimir Oltean
6c93099450 mii: Add helpers for parsing SGMII auto-negotiation
Typically a MAC PCS auto-configures itself after it receives the
negotiated copper-side link settings from the PHY, but some MAC devices
are more special and need manual interpretation of the SGMII AN result.

In other cases, the PCS exposes the entire tx_config_reg base page as it
is transmitted on the wire during auto-negotiation, so it makes sense to
be able to decode the equivalent lp_advertised bit mask from the raw u16
(of course, "lp" considering the PCS to be the local PHY).

Therefore, add the bit definitions for the SGMII registers 4 and 5
(local device ability, link partner ability), as well as a link_mode
conversion helper that can be used to feed the AN results into
phy_resolve_aneg_linkmode.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 23:22:32 -08:00
Ingo Molnar
31c7ac388a Linux 5.5-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4SYegeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4m4H+QGCUN8SXN+2B+0/
 BfzOf7PFoKzAx3NwDbJQIZqhSl+Zfa4n3VGPEF8sXsvoQgdYvuJnS/5JiAZ9iRIH
 HAfFzegzQ3mCl8Du+SqCvQKs2Jt4OMCX62KGRebRBhpoKfZdwmN7n7pn9lWO771K
 9rxTpeItXhmK46jOFRbi5oyQfmkfSfyUN1b9CB53FXFS+ZDkDNA7QQiIYnKOD7SZ
 RrL7czhZ580QOC61qOlnz1GIhRzvU5SXg4OtuI3YfoOJRY5FKC3YtOgLReT0vPs+
 vEhAyP93upVXIhqm10WHNjd4t4a45Vy5ff64uFsQ9QV4nnqsC2C70YwWbVDdtz/W
 Lm0mvE8=
 =NECs
 -----END PGP SIGNATURE-----

Merge tag 'v5.5-rc5' into locking/kcsan, to resolve conflict

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-06 07:51:15 +01:00
Jean-Jacques Hiblot
e389240ad9 leds: Add managed API to get a LED from a device driver
If the LED is acquired by a consumer device with devm_led_get(), it is
automatically released when the device is detached.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-01-06 00:20:18 +01:00
Tomi Valkeinen
699a8c7c4b leds: Add of_led_get() and led_put()
This patch adds basic support for a kernel driver to get a LED device.
This will be used by the led-backlight driver.

Only OF version is implemented for now, and the behavior is similar to
PWM's of_pwm_get() and pwm_put().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-01-06 00:20:06 +01:00
Vladimir Oltean
a68578c20a net: dsa: Make deferred_xmit private to sja1105
There are 3 things that are wrong with the DSA deferred xmit mechanism:

1. Its introduction has made the DSA hotpath ever so slightly more
   inefficient for everybody, since DSA_SKB_CB(skb)->deferred_xmit needs
   to be initialized to false for every transmitted frame, in order to
   figure out whether the driver requested deferral or not (a very rare
   occasion, rare even for the only driver that does use this mechanism:
   sja1105). That was necessary to avoid kfree_skb from freeing the skb.

2. Because L2 PTP is a link-local protocol like STP, it requires
   management routes and deferred xmit with this switch. But as opposed
   to STP, the deferred work mechanism needs to schedule the packet
   rather quickly for the TX timstamp to be collected in time and sent
   to user space. But there is no provision for controlling the
   scheduling priority of this deferred xmit workqueue. Too bad this is
   a rather specific requirement for a feature that nobody else uses
   (more below).

3. Perhaps most importantly, it makes the DSA core adhere a bit too
   much to the NXP company-wide policy "Innovate Where It Doesn't
   Matter". The sja1105 is probably the only DSA switch that requires
   some frames sent from the CPU to be routed to the slave port via an
   out-of-band configuration (register write) rather than in-band (DSA
   tag). And there are indeed very good reasons to not want to do that:
   if that out-of-band register is at the other end of a slow bus such
   as SPI, then you limit that Ethernet flow's throughput to effectively
   the throughput of the SPI bus. So hardware vendors should definitely
   not be encouraged to design this way. We do _not_ want more
   widespread use of this mechanism.

Luckily we have a solution for each of the 3 issues:

For 1, we can just remove that variable in the skb->cb and counteract
the effect of kfree_skb with skb_get, much to the same effect. The
advantage, of course, being that anybody who doesn't use deferred xmit
doesn't need to do any extra operation in the hotpath.

For 2, we can create a kernel thread for each port's deferred xmit work.
If the user switch ports are named swp0, swp1, swp2, the kernel threads
will be named swp0_xmit, swp1_xmit, swp2_xmit (there appears to be a 15
character length limit on kernel thread names). With this, the user can
change the scheduling priority with chrt $(pidof swp2_xmit).

For 3, we can actually move the entire implementation to the sja1105
driver.

So this patch deletes the generic implementation from the DSA core and
adds a new one, more adequate to the requirements of PTP TX
timestamping, in sja1105_main.c.

Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 15:13:13 -08:00
Vladimir Oltean
0a51826c6e net: dsa: sja1105: Always send through management routes in slot 0
I finally found out how the 4 management route slots are supposed to
be used, but.. it's not worth it.

The description from the comment I've just deleted in this commit is
still true: when more than 1 management slot is active at the same time,
the switch will match frames incoming [from the CPU port] on the lowest
numbered management slot that matches the frame's DMAC.

My issue was that one was not supposed to statically assign each port a
slot. Yes, there are 4 slots and also 4 non-CPU ports, but that is a
mere coincidence.

Instead, the switch can be used like this: every management frame gets a
slot at the right of the most recently assigned slot:

Send mgmt frame 1 through S0:    S0 x  x  x
Send mgmt frame 2 through S1:    S0 S1 x  x
Send mgmt frame 3 through S2:    S0 S1 S2 x
Send mgmt frame 4 through S3:    S0 S1 S2 S3

The difference compared to the old usage is that the transmission of
frames 1-4 doesn't need to wait until the completion of the management
route. It is safe to use a slot to the right of the most recently used
one, because by protocol nobody will program a slot to your left and
"steal" your route towards the correct egress port.

So there is a potential throughput benefit here.

But mgmt frame 5 has no more free slot to use, so it has to wait until
_all_ of S0, S1, S2, S3 are full, in order to use S0 again.

And that's actually exactly the problem: I was looking for something
that would bring more predictable transmission latency, but this is
exactly the opposite: 3 out of 4 frames would be transmitted quicker,
but the 4th would draw the short straw and have a worse worst-case
latency than before.

Useless.

Things are made even worse by PTP TX timestamping, which is something I
won't go deeply into here. Suffice to say that the fact there is a
driver-level lock on the SPI bus offsets any potential throughput gains
that parallelism might bring.

So there's no going back to the multi-slot scheme, remove the
"mgmt_slot" variable from sja1105_port and the dummy static assignment
made at probe time.

While passing by, also remove the assignment to casc_port altogether.
Don't pretend that we support cascaded setups.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 15:13:12 -08:00
Russell King
c114574ebf net: phy: add PHY_INTERFACE_MODE_10GBASER
Recent discussion has revealed that the use of PHY_INTERFACE_MODE_10GKR
is incorrect. Add a 10GBASE-R definition, document both the -R and -KR
versions, and the fact that 10GKR was used incorrectly.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 15:05:35 -08:00
Krzysztof Kozlowski
14a65084f9 net: ethernet: sxgbe: Rename Samsung to lowercase
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
name.

"SAMSUNG" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 14:48:55 -08:00
Stephen Boyd
2d34f09e79 clk: fixed-rate: Add support for specifying parents via DT/pointers
After commit fc0c209c14 ("clk: Allow parents to be specified without
string names") we can use DT or direct clk_hw pointers to specify
parents. Create a generic function that shouldn't be used very often to
encode the multitude of ways of registering a fixed rate clk with
different parent information. Then add a bunch of wrapper macros that
only pass down what needs to be passed down to the generic function to
support this with less arguments.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-7-sboyd@kernel.org
2020-01-05 13:35:12 -08:00
Stephen Boyd
32205b7541 clk: fixed-rate: Document accuracy member
This member isn't documented, leading to kernel-doc warnings. Document
it.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-6-sboyd@kernel.org
2020-01-05 13:34:37 -08:00
Stephen Boyd
38d1e38093 clk: fixed-rate: Move to_clk_fixed_rate() to C file
The only user of this macro is the fixed rate basic type. Move it there
to avoid polluting provider drivers.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-5-sboyd@kernel.org
2020-01-05 13:34:37 -08:00
Stephen Boyd
576859dfc5 clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy()
There aren't any users of this API anymore. Remove it.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-4-sboyd@kernel.org
2020-01-05 13:34:37 -08:00
Stephen Boyd
9a9b5a4af0 clk: gpio: Use DT way of specifying parents
Nobody has used the gpio clk registration functions nor the gpio clk_ops
exposed by the basic gpio clk type. Let's remove all those APIs and move
the gpio clk support into the C file. Since nothing is using the
exported APIs, simplify the driver to be a platform driver that uses
clk_parent_data to pick 0th or 1st cell of the node's clocks property.

Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190830150923.259497-2-sboyd@kernel.org
2020-01-05 13:34:36 -08:00
Takashi Iwai
f5f87abfb7 ALSA: Allow const arrays for legacy resource management helpers
Declare the arrays passed to the helper functions for legacy resources
(mostly for ISA drivers) as const, so that each caller can make its
static data as const for minor optimizations, too.

Link: https://lore.kernel.org/r/20200105144823.29547-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-05 16:14:26 +01:00
Taniya Das
4cc62ebd0c dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings
Add device tree bindings for video clock controller for
Qualcomm Technology Inc's SC7180 SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/1577428714-17766-6-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-04 23:25:01 -08:00
Taniya Das
468e727d18 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings
Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SC7180 SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/1577428714-17766-3-git-send-email-tdas@codeaurora.org
[sboyd@kernel.org: Indicate sc7180 in commit subject]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-04 23:24:28 -08:00