Commit graph

1,264,895 commits

Author SHA1 Message Date
Oliver Upton
a5c7f011cb KVM: arm64: vgic: Free LPI vgic_irq structs in an RCU-safe manner
Free the vgic_irq structs in an RCU-safe manner to allow reads of the
LPI configuration data to happen in parallel with the release of LPIs.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-23 21:46:02 +00:00
Oliver Upton
05f4d4f5d4 KVM: arm64: vgic: Use atomics to count LPIs
Switch to using atomics for LPI accounting, allowing vgic_irq references
to be dropped in parallel.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-23 21:46:02 +00:00
Oliver Upton
9880835af7 KVM: arm64: vgic: Get rid of the LPI linked-list
All readers of LPI configuration have been transitioned to use the LPI
xarray. Get rid of the linked-list altogether.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-23 21:46:02 +00:00
Oliver Upton
2798683b8c KVM: arm64: vgic-its: Walk the LPI xarray in vgic_copy_lpi_list()
Start iterating the LPI xarray in anticipation of removing the LPI
linked-list.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-23 21:46:02 +00:00
Oliver Upton
49f0a468a1 KVM: arm64: vgic-v3: Iterate the xarray to find pending LPIs
Start walking the LPI xarray to find pending LPIs in preparation for
the removal of the LPI linked-list. Note that the 'basic' iterator
is chosen here as each iteration needs to drop the xarray read lock
(RCU) as reads/writes to guest memory can potentially block.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-23 21:46:02 +00:00
Oliver Upton
5a021df719 KVM: arm64: vgic: Use xarray to find LPI in vgic_get_lpi()
Iterating over the LPI linked-list is less than ideal when the desired
index is already known. Use the INTID to index the LPI xarray instead.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-23 21:46:02 +00:00
Oliver Upton
1d6f83f60f KVM: arm64: vgic: Store LPIs in an xarray
Using a linked-list for LPIs is less than ideal as it of course requires
iterative searches to find a particular entry. An xarray is a better
data structure for this use case, as it provides faster searches and can
still handle a potentially sparse range of INTID allocations.

Start by storing LPIs in an xarray, punting usage of the xarray to a
subsequent change. The observant among you will notice that we added yet
another lock to the chain of locking order rules; document the ordering
of the xa_lock. Don't worry, we'll get rid of the lpi_list_lock one
day...

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-23 21:46:01 +00:00
Oliver Upton
284851ee5c KVM: Get rid of return value from kvm_arch_create_vm_debugfs()
The general expectation with debugfs is that any initialization failure
is nonfatal. Nevertheless, kvm_arch_create_vm_debugfs() allows
implementations to return an error and kvm_create_vm_debugfs() allows
that to fail VM creation.

Change to a void return to discourage architectures from making debugfs
failures fatal for the VM. Seems like everyone already had the right
idea, as all implementations already return 0 unconditionally.

Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20240216155941.2029458-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-23 21:44:58 +00:00
Rodrigo Vivi
de8de2c8ac drm/i915: convert remaining intel_dp_vsc_sdp_pack
Commit 47f419e071 ("drm/dp: move intel_dp_vsc_sdp_pack() to generic helper")
and commit b55b88d86f ("drm/dp: drop the size parameter from drm_dp_vsc_sdp_pack()")
were based on top of a tree containing the
commit 31a5b6ed88 ("drm/i915/display: Unify VSC SPD preparation") but
landed in a tree where this commit didn't exist, leaving behind a spurious
case calling for a removed function: intel_dp_vsc_sdp_pack()

Let's convert the remaining case here so we can port this patch to
any tree that doesn't contain
commit 31a5b6ed88 ("drm/i915/display: Unify VSC SPD preparation")

In in kind of merge where this commit does exist, this line here will
be gone anyway and not needed any longer.

Fixes: 47f419e071 ("drm/dp: move intel_dp_vsc_sdp_pack() to generic helper")
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223191548.392185-1-rodrigo.vivi@intel.com
2024-02-23 23:01:53 +02:00
Martin Botka
f4318af405 arm64: dts: allwinner: h616: Add thermal sensor and zones
There are four thermal sensors:
- CPU
- GPU
- VE
- DRAM

Add the thermal sensor configuration and the thermal zones.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240219153639.179814-8-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:38:21 +01:00
Fuyao Kashizuku
6d8d1124d7 ARM: dts: sun8i: Open FETA40i-C regulator aldo1
The USB PHY in the Allwinner R40 SoC seems to rely on voltage on the
VCC-TVIN/OUT supply pins for proper operation, on top of its own supply
voltage on VCC-USB. Without a 3.3V voltage supplied to VCC-TV*, USB
operation becomes unstable and can result in disconnects.

The Forlinx FETA40i-C SoM connects both the VCC-TVOUT and VCC-TVIN pins
to the ALDO1 rail of the PMIC, so we need to enable that rail for USB
operation. Since there is no supply property in the DT bindings for
the USB core, we need to always enable the regulator.

This fixes unstable USB operation on boards using the Forlinx FETA40i-C
module.

Signed-off-by: Fuyao Kashizuku <fuyao@sjterm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/ZYqRZev1g_mztff2@debian.cyg
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:07:06 +01:00
Jisheng Zhang
b9957d2d7d arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
The Sipeed Longan SoM 3H is a system on module based on the Allwinner
H618 SoC. The SoM features:

- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
- 2/4 GiB LPDDR4 DRAM SoMs
- AXP313a PMIC
- eMMC

The Sipeed Longan PI 3H is a development board based on the above SoM.
The board features:
- Longan SoM 3H
- Raspberry-Pi-1 compatible GPIO header
- 2 USB 2.0 host port
- 1 USB 2.0 type C port (power supply + OTG)
- MicroSD slot
- 1Gbps Ethernet port (via RTL8211 PHY)
- HDMI port
- WiFi/BT chip

Add the devicetree file describing the currently supported features,
namely PMIC, LEDs, UART, SD card, eMMC, USB and Ethernet.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240211081739.395-3-jszhang@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:06:55 +01:00
Jisheng Zhang
b9836187df dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
Add name & compatible for the Sipeed Longan Module 3H and Longan PI 3H
board.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240211081739.395-2-jszhang@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:02 +01:00
Krzysztof Kozlowski
7b78f30895 arm64: dts: allwinner: h616: minor whitespace cleanup
The DTS code coding style expects exactly one space before '{'
character.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240208105301.129005-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:02 +01:00
Krzysztof Kozlowski
43293b1dec arm64: dts: allwinner: use capital "OR" for multiple licenses in SPDX
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR".  Correct it
to keep consistent format and avoid copy-paste issues.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240208105301.129005-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Andre Przywara
eff68845b7 arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes
In contrast to other devices using Allwinner SoCs, the Transpeed 8K618-T
TV box uses a mainline supported WiFi chip: it's Broadcom 4335 compatible,
packaged by Murata.

Add the required DT nodes to let DT users know about the SDIO device.
There is an otherwise empty MMC device node, to receive the MAC address,
that firmware might want to write in there.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240209115759.3582869-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Andre Przywara
9583c8d914 arm64: dts: allwinner: h616: Add 32K fanout pin
On some boards the designers saved on a 32KHz crystal for some external
chips, so the SoC has to help out, with providing a 32 KHz clock signal.

Add a pinctrl group node to allow DT nodes to reference this fanout signal.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240209115759.3582869-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Andre Przywara
4d39a8eb07 arm64: dts: allwinner: Add Jide Remix Mini PC support
The Remix Mini PC is a "mini computer" using the Allwinner H64 SoC,
which appears to be just a relabelled A64. It was launched in 2015 by
the now defunct company Jide, and shipped with a desktop optimised
version of Android. It features
	- Allwinner H64 Soc (4 * Arm Cortex-A53 cores)
	- 1 or 2 GB DRAM
	- 8 or 16 GB eMMC flash
	- 100 MBit Ethernet port (using an X-Powers AC200 PHY)
	- RTL8723BS WiFi & Bluetooth chip
	- HDMI port
	- two USB 2.0 ports
	- 3.5mm AV port
	- microSD card slot

The devicetree covers most peripherals, though there is no agreed
binding for the PHY chip yet, so this is left out.
The eMMC did not work with the MMC DDR speed mode, so this mode property
is omitted.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240209114018.3580370-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Andre Przywara
53e437141f dt-bindings: arm: sunxi: document Remix Mini PC name
The Jide Remix Mini PC is a mini computer that ships with the Remix OS
Android based system. The SoC is an Allwinner H64, which is very close,
if not identical to the Allwinner A64.

Add the board/SoC compatible string pair to the list of known boards.
There are some drivers that look explicitly for the A64 compatible name,
so retain this name to increase compatibility.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240209114018.3580370-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Andre Przywara
171b99b276 dt-bindings: vendor-prefixes: add Jide
Jide tech once create the Remix OS Android system, and shipped it on
some custom hardware. Add their name to the bindings.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240209114018.3580370-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Chen-Yu Tsai
fe5128a11f arm64: dts: allwinner: h616: Add SPDIF device node
The H616 SoC has an SPDIF transmitter hardware block, which has the same
layout as the one in the H6, minus the receiver side.

Add a device node for it, and a default pinmux.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240127163247.384439-8-wens@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Chen-Yu Tsai
238f65fc31 arm64: dts: allwinner: h616: Add DMA controller and DMA channels
The DMA controllers found on the H616 and H618 are the same as the one
found on the A100. The only difference is the DMA endpoint (DRQ) layout.

Add a device node for it, and add DMA channels for existing peripherals.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240127163247.384439-7-wens@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Chen-Yu Tsai
7b59348c11 arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
The SPDIF hardware found on the H6 supports both transmit and receive
functions. However it is missing the RX DMA channel.

Add the SPDIF hardware block's RX DMA channel. Also remove the
by-default pinmux, since the end device can choose to implement
either or both functionalities.

Fixes: f95b598df4 ("arm64: dts: allwinner: Add SPDIF node for Allwinner H6")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240127163247.384439-6-wens@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Krzysztof Kozlowski
02cc4c30dc dt-bindings: sram: narrow regex for unit address to hex numbers
Regular expression used to match the unit address part should not allow
non-hex numbers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240123083450.20996-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:04:01 +01:00
Balakrishnan Sambath
62afd6247a ARM: dts: microchip: sama7g5: add sama7g5 compatible
Add sama7g5 flexcom specific compatible in DT with fallbacks.

Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Link: https://lore.kernel.org/r/20240223-b4-sama5d2-flexcom-yaml-v2-1-7e96c60c7701@microchip.com
[claudiu.beznea: adapt for flexcom10]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-02-23 22:03:38 +02:00
Jernej Skrabec
cbec657208 arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
Orange Pi Zero 2W dts file is not included in Makefile. Fix this.

Fixes: c505ee1eae ("arm64: dts: allwinner: h616: add Orange Pi Zero 2W support")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240222211326.114955-1-jernej.skrabec@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23 21:02:51 +01:00
Claudiu Beznea
360c99ca9f ARM: dts: microchip: sam9x60: align dmas to the opening '<'
Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."

Link: https://lore.kernel.org/r/20240218151353.3612621-3-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-02-23 21:53:29 +02:00
Claudiu Beznea
4ec96b6725 ARM: dts: microchip: sama7g5: align dmas to the opening '<'
Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."

Link: https://lore.kernel.org/r/20240218151353.3612621-2-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-02-23 21:53:28 +02:00
Mihai Sain
ebd6591f8d ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board
Add initial device tree of the SAMA7G54 Curiosity board.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20240215091524.14732-4-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-02-23 21:52:32 +02:00
Mihai Sain
81bf72ae14 ARM: dts: microchip: sama7g5: Add flexcom 10 node
Add flexcom 10 node for usage on the SAMA7G54 Curiosity board.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20240215091524.14732-3-mihai.sain@microchip.com
[claudiu.beznea: align dmas to the opening '<']
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-02-23 21:51:47 +02:00
Maíra Canal
51b76c1f30
drm/v3d: Enable V3D to use different PAGE_SIZE
Currently, the V3D driver uses PAGE_SHIFT over the assumption that
PAGE_SHIFT = 12, as the PAGE_SIZE = 4KB. But, the RPi 5 is using
PAGE_SIZE = 16KB, so the MMU PAGE_SHIFT is different than the system's
PAGE_SHIFT.

Enable V3D to be used in system's with any PAGE_SIZE by making sure that
everything MMU-related uses the MMU page shift.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214193503.164462-1-mcanal@igalia.com
2024-02-23 16:37:20 -03:00
Linus Torvalds
603c04e27c parisc architecture fixes for kernel v6.8-rc6:
- Fix CPU hotplug
 - Fix unaligned accesses and faults in stack unwinder
 - Fix potential build errors by always including asm-generic/kprobes.h
 - Fix build bug by add missing CONFIG_DYNAMIC_FTRACE check
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZdjO+gAKCRD3ErUQojoP
 X5QiAPsGd0pv/I5HXc/JkwnqBaP7RC1BwN01og4ftzmKG8ngvQD+JH4YT2rvT7c0
 0FgUVp5khg0ZgSZ6IGUFy7GUs8uanww=
 =XdOQ
 -----END PGP SIGNATURE-----

Merge tag 'parisc-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:
 "Fixes CPU hotplug, the parisc stack unwinder and two possible build
  errors in kprobes and ftrace area:

   - Fix CPU hotplug

   - Fix unaligned accesses and faults in stack unwinder

   - Fix potential build errors by always including asm-generic/kprobes.h

   - Fix build bug by add missing CONFIG_DYNAMIC_FTRACE check"

* tag 'parisc-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix stack unwinder
  parisc/kprobes: always include asm-generic/kprobes.h
  parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check
  Revert "parisc: Only list existing CPUs in cpu_possible_mask"
2024-02-23 10:40:20 -08:00
Linus Torvalds
e44baca779 Arm and RISC-V SoC fixes for 6.8, part 2
The Rockchip and IMX8 platforms get a number of fixes for dts files in
 order to address some misconfigurations, including a regression for
 USB-C support on some boards.
 
 The other dts fixes are part of a series by Rob Herring to clean up
 another class of dtc compiler warnings across all platforms, with
 a few others helping out as well. With this, we can enable the warning
 for the coming merge window without introducing regressions.
 
 Conor Dooley has collected fixes for RISC-V platforms, both for the
 dts files and for platofrm specific drivers.
 
 The ep93xx platform gets a regression for for its gpio descriptors.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXYmjcACgkQYKtH/8kJ
 UieiAw/+K1bDnxVhgHB8PXAToCF+fhNCpaSUp/oShz2cbPYcExOn2XMWPvkRp/Jo
 lEsZPr9E4M13ot0P/KOQO7J8aGYiaBca0enHD3EflPNo84qjnZfmBSnFVV9JHEk0
 WzyZBPlm1Ynz97bMr56KqzeJBdn+iYwpf7Ekp7OqOmTB7Y/q3DGr67TCLcxO+QJD
 s2pObk4CODeC8JuWDQ5SpA0K8KA6fO7ubGe2ecOJkaLqtdDoe6dMbnJ3VFtBKd4Y
 0uL2E0WGNsAP4fkYCeajTEKRmqjbWfNiFsgva4RFPVjcyKBqi890Mkes4MhS/bTo
 wCV/6AWYuIfZnKmzKGJp0Bj4cl2ZNEc6M+G5XQMHmlXrrTe2aFiKeibc56uKKrjC
 17DoPWD4oIUH3TLh0vRhRCG0/aagTeGYerOTtPKKs+vLfSqri7nv3gW7Cybm1oPh
 xcI2ieMNzLTEio3bQ1fu7B/wBWjtjGhi0VFsEQcj5wQpLuvMC4G5I1el0zbAlzri
 YzXRbNIkg7PRgOdNQ4d3FzM8TaKcG15AHOi56VXGz/aV7yBInMxfSrTEkzY/KFXN
 oXIhPRwJW3pDEa3dEcGataLwgVdZtCOdAi8CdEal5l8H33+WIKBN8jxlxirxs7IQ
 sxMaunOSSCOH+j71bwxuI5wFQ/OevX+lX+0AEAqh+qyuatw1d8I=
 =iNfa
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull arm and RISC-V SoC fixes from Arnd Bergmann:
 "The Rockchip and IMX8 platforms get a number of fixes for dts files in
  order to address some misconfigurations, including a regression for
  USB-C support on some boards.

  The other dts fixes are part of a series by Rob Herring to clean up
  another class of dtc compiler warnings across all platforms, with a
  few others helping out as well. With this, we can enable the warning
  for the coming merge window without introducing regressions.

  Conor Dooley has collected fixes for RISC-V platforms, both for the
  dts files and for platofrm specific drivers.

  The ep93xx platform gets a regression for for its gpio descriptors"

* tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
  ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
  cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
  arm64: dts: qcom: Fix interrupt-map cell sizes
  arm: dts: Fix dtc interrupt_map warnings
  arm64: dts: Fix dtc interrupt_provider warnings
  arm: dts: Fix dtc interrupt_provider warnings
  arm64: dts: freescale: Disable interrupt_map check
  ARM: ep93xx: Add terminator to gpiod_lookup_table
  riscv: dts: sifive: add missing #interrupt-cells to pmic
  arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
  arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
  arm64: dts: rockchip: set num-cs property for spi on px30
  arm64: dts: rockchip: minor rk3588 whitespace cleanup
  riscv: dts: starfive: replace underscores in node names
  bus: imx-weim: fix valid range check
  Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
  Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
  arm64: dts: tqma8mpql: fix audio codec iov-supply
  arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
  ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
  ...
2024-02-23 10:31:28 -08:00
Varshini Rajendran
c06a7a8e88
ASoC: dt-bindings: microchip: add sam9x7
Add sam9x7 compatible in the DT documentation.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223172657.672439-1-varshini.rajendran@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-23 18:28:02 +00:00
Varshini Rajendran
89f3180d59
ASoC: dt-bindings: atmel-classd: add sam9x7 compatible
Add sam9x7 compatible to DT bindings documentation.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Link: https://lore.kernel.org/r/20240223172608.672190-1-varshini.rajendran@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-23 18:28:01 +00:00
Linus Torvalds
86f01602a4 arm64 fixes for -rc6
- Revert fix to jump label asm constraints, as it regresses the build
   with some GCC 5.5 toolchains.
 
 - Restore SME control registers when resuming from suspend
 
 - Fix incorrect filter definition in CXL PMU driver
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmXXVFoQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNPQpB/9+TGwvTPj3xEJcrJwTnsoY2tMtJdYO/sli
 f31auT0PsOI1RtMin1fyiN9fOpIbjWHcdlBgUxnkyV6c2MpViw8L/0H27guJGWgv
 +G26+H/Ch1BsujewKkfJxX5GimdGZ2uBvbiYyBb4EXg36/UG6qeRjfYP+EB70UPY
 rrT01E8UGv6WDShY9om7QVO91X7YU6EBUfu46wPrs2LFbueaBwCEBZBLE5qu4vWF
 N7yWOWR2CUt/P4v8a5LfV3wwM+VRdmvovHnPUH5uR7QthEa+gDCDPsjf3fus4nts
 iE6NCC517j9cG8lz7B5FJP6UfMPWgbNr1QMFuoyrzwdvc6EoXG6z
 =+SsP
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "A simple fix to a definition in the CXL PMU driver, a couple of
  patches to restore SME control registers on the resume path (since
  Arm's fast model now clears them) and a revert for our jump label asm
  constraints after Geert noticed they broke the build with GCC 5.5.

  There was then the ensuing discussion about raising the minimum GCC
  (and corresponding binutils) versions at [1], but for now we'll keep
  things working as they were until that goes ahead.

   - Revert fix to jump label asm constraints, as it regresses the build
     with some GCC 5.5 toolchains.

   - Restore SME control registers when resuming from suspend

   - Fix incorrect filter definition in CXL PMU driver"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend
  arm64/sme: Restore SME registers on exit from suspend
  Revert "arm64: jump_label: use constraints "Si" instead of "i""
  perf: CXL: fix CPMU filter value mask length
2024-02-23 10:26:43 -08:00
Sean Christopherson
d02c357e5b KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
Retry page faults without acquiring mmu_lock, and without even faulting
the page into the primary MMU, if the resolved gfn is covered by an active
invalidation.  Contending for mmu_lock is especially problematic on
preemptible kernels as the mmu_notifier invalidation task will yield
mmu_lock (see rwlock_needbreak()), delay the in-progress invalidation, and
ultimately increase the latency of resolving the page fault.  And in the
worst case scenario, yielding will be accompanied by a remote TLB flush,
e.g. if the invalidation covers a large range of memory and vCPUs are
accessing addresses that were already zapped.

Faulting the page into the primary MMU is similarly problematic, as doing
so may acquire locks that need to be taken for the invalidation to
complete (the primary MMU has finer grained locks than KVM's MMU), and/or
may cause unnecessary churn (getting/putting pages, marking them accessed,
etc).

Alternatively, the yielding issue could be mitigated by teaching KVM's MMU
iterators to perform more work before yielding, but that wouldn't solve
the lock contention and would negatively affect scenarios where a vCPU is
trying to fault in an address that is NOT covered by the in-progress
invalidation.

Add a dedicated lockess version of the range-based retry check to avoid
false positives on the sanity check on start+end WARN, and so that it's
super obvious that checking for a racing invalidation without holding
mmu_lock is unsafe (though obviously useful).

Wrap mmu_invalidate_in_progress in READ_ONCE() to ensure that pre-checking
invalidation in a loop won't put KVM into an infinite loop, e.g. due to
caching the in-progress flag and never seeing it go to '0'.

Force a load of mmu_invalidate_seq as well, even though it isn't strictly
necessary to avoid an infinite loop, as doing so improves the probability
that KVM will detect an invalidation that already completed before
acquiring mmu_lock and bailing anyways.

Do the pre-check even for non-preemptible kernels, as waiting to detect
the invalidation until mmu_lock is held guarantees the vCPU will observe
the worst case latency in terms of handling the fault, and can generate
even more mmu_lock contention.  E.g. the vCPU will acquire mmu_lock,
detect retry, drop mmu_lock, re-enter the guest, retake the fault, and
eventually re-acquire mmu_lock.  This behavior is also why there are no
new starvation issues due to losing the fairness guarantees provided by
rwlocks: if the vCPU needs to retry, it _must_ drop mmu_lock, i.e. waiting
on mmu_lock doesn't guarantee forward progress in the face of _another_
mmu_notifier invalidation event.

Note, adding READ_ONCE() isn't entirely free, e.g. on x86, the READ_ONCE()
may generate a load into a register instead of doing a direct comparison
(MOV+TEST+Jcc instead of CMP+Jcc), but practically speaking the added cost
is a few bytes of code and maaaaybe a cycle or three.

Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/ZNnPF4W26ZbAyGto@yzhao56-desk.sh.intel.com
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Yuan Yao <yuan.yao@linux.intel.com>
Cc: Xu Yilun <yilun.xu@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240222012640.2820927-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-23 10:14:34 -08:00
Linus Torvalds
5efa18e862 s390 fixes for 6.8-rc6
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
   device initialization
 
 - Add missing multiplication by 8 in __iowrite64_copy() to get the
   correct byte length before calling zpci_memcpy_toio()
 
 - Various config updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmXYvSsACgkQIg7DeRsp
 bsIkmw/+JABfYGH1/z0E3g7PSUrsbQkRiINyzmsv57KmIzMVNAhQoYSWiRiCqjVs
 /XB2u2vgkVSZL+29vJCd178MnKK/LiN7VavbmNrYJxpVmgSsM0cc/CjGGf71lh2b
 z25YbmtXGOA6Dgg+1KY0sFouMDzCT82imvKj5dvE0+NB4PBevslNGdY7qZroUGXg
 mcvAA44qkfv61TaaMkt7o/9Mz5SJZ6byR3kacz6twpyGfbIboeQqCkejovit/Yb2
 IlqtbMoWkCmO0ULRr96Pl156Ja8guCYiGvTjjL51DDeLymkiN9z6lNblOqRy0GP6
 +YZKtbU3vdmdaVgk1Bp/ez1frjeteLAFbhRejie39Wd9TibuJp00DouRLJRJnaep
 PywZd82oyMv94x2fy+nC4aBb6MxiOmsl5I2z/IilU0+O0gfToEgAXUb/fRAFFr1H
 1P/5jouS7mMpgaf9nHBWh740oOs5XJX8xGe9S8+BFLTElKnBbAEknQU+e5NOr39K
 OjMxG9OSC4UqiodYFgJtbhqmLV6BWN3m3sY/6SWZep3JbyiDwKB7G2a/4Q5SvypU
 3e5WTVdx9EuTRNgXtA7bkwnNt8XG9JubAhInlNAt29bSkIvt8YODDwPPSpMNMVhC
 vzotbMAX/cuncX6jumO3qkqimIZ1oSBBUJgq5RmYuLMvGQz7RH8=
 =RG5H
 -----END PGP SIGNATURE-----

Merge tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

 - Fix invalid -EBUSY on ccw_device_start() which can lead to failing
   device initialization

 - Add missing multiplication by 8 in __iowrite64_copy() to get the
   correct byte length before calling zpci_memcpy_toio()

 - Various config updates

* tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: fix invalid -EBUSY on ccw_device_start
  s390: use the correct count for __iowrite64_copy()
  s390/configs: update default configurations
  s390/configs: enable INIT_STACK_ALL_ZERO in all configurations
  s390/configs: provide compat topic configuration target
2024-02-23 09:54:13 -08:00
Linus Torvalds
95e73fb16a 14 hotfixes. 10 are cc:stable and the remainder address post-6.7 issues
or aren't considered appropriate for backporting.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZdfSoQAKCRDdBJ7gKXxA
 jtdcAQCEMwrTnSVOfP0WxixL11HK8a1bJdezHBLWFUDscm4BXgD9EV4mgQ2yPDA6
 ka+Lf9MucZSpJ2QYZA4GoDqP4wefawA=
 =zI6b
 -----END PGP SIGNATURE-----

Merge tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "A batch of MM (and one non-MM) hotfixes.

  Ten are cc:stable and the remainder address post-6.7 issues or aren't
  considered appropriate for backporting"

* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
  mm/damon/lru_sort: fix quota status loss due to online tunings
  mm/damon/reclaim: fix quota stauts loss due to online tunings
  MAINTAINERS: mailmap: update Shakeel's email address
  mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
  mm: memcontrol: clarify swapaccount=0 deprecation warning
  mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
  mm/zswap: invalidate duplicate entry when !zswap_enabled
  lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
  mm/swap: fix race when skipping swapcache
  mm/swap_state: update zswap LRU's protection range with the folio locked
  selftests/mm: uffd-unit-test check if huge page size is 0
  mm/damon/core: check apply interval in damon_do_apply_schemes()
  mm: zswap: fix missing folio cleanup in writeback race path
2024-02-23 09:43:21 -08:00
Mihai Sain
6e42198201 dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity
Document device tree binding of the Microchip SAMA7G54 Curiosity board.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215091524.14732-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-02-23 19:36:53 +02:00
Rafael J. Wysocki
a85739c8c6 thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS
The only difference made by CONFIG_THERMAL_WRITABLE_TRIPS is whether or
not the writable trips mask passed during thermal zone registration
will take any effect, but whoever passes a non-zero writable trips mask
to thermal_zone_device_register_with_trips() can be forgiven thinking
that it will always work.

Moreover, some thermal drivers expect user space to set trip temperature
values, so they select CONFIG_THERMAL_WRITABLE_TRIPS, possibly overriding
a manual choice to unset it and going against the design purportedly
allowing system integrators to decide on the writability of trip points
for the given kernel build.  It is also set in one platform's defconfig.

Forthermore, CONFIG_THERMAL_WRITABLE_TRIPS only affects trip temperature,
because trip hysteresis is writable as long as the thermal zone provides
a callback to update it, regardless of the CONFIG_THERMAL_WRITABLE_TRIPS
value.

The above means that the symbol in question is used inconsistently and
its purpose is at least moot, so remove it and always take the writable
trip mask passed to thermal_zone_device_register_with_trips() into
account.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-23 18:24:48 +01:00
Rafael J. Wysocki
62dd17846d thermal: intel: Adjust ops handling during thermal zone registration
Because thermal zone operations are now stored directly in struct
thermal_zone_device, thermal zone creators can discard the operations
structure after the zone registration is complete, or it can be made
read-only.

Accordingly, make int340x_thermal_zone_add() use a local variable to
represent thermal zone operations, so it is freed automatically upon the
function exit, and make the other Intel thermal drivers use const zone
operations structures.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-23 18:24:48 +01:00
Rafael J. Wysocki
75fb871472 thermal: ACPI: Constify acpi_thermal_zone_ops
Because thermal zone operations are now stored directly in struct
thermal_zone_device, acpi_thermal_zone_ops need not be modified by
the thermal core and so it can be const.

Adjust the code accordingly.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-23 18:24:48 +01:00
Rafael J. Wysocki
698a1eb1f7 thermal: core: Store zone ops in struct thermal_zone_device
The current code requires thermal zone creators to pass pointers to
writable ops structures to thermal_zone_device_register_with_trips()
which needs to modify the target struct thermal_zone_device_ops object
if the "critical" operation in it is NULL.

Moreover, the callers of thermal_zone_device_register_with_trips() are
required to hold on to the struct thermal_zone_device_ops object passed
to it until the given thermal zone is unregistered.

Both of these requirements are quite inconvenient, so modify struct
thermal_zone_device to contain struct thermal_zone_device_ops as field and
make thermal_zone_device_register_with_trips() copy the contents of the
struct thermal_zone_device_ops passed to it via a pointer (which can be
const now) to that field.

Also adjust the code using thermal zone ops accordingly and modify
thermal_of_zone_register() to use a local ops variable during
thermal zone registration so ops do not need to be freed in
thermal_of_zone_unregister() any more.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-23 18:24:48 +01:00
Rafael J. Wysocki
fcbf878000 thermal: intel: Discard trip tables after zone registration
Because the thermal core creates and uses its own copy of the trips
table passed to thermal_zone_device_register_with_trips(), it is not
necessary to hold on to a local copy of it any more after the given
thermal zone has been registered.

Accordingly, modify Intel thermal drivers to discard the trips tables
passed to thermal_zone_device_register_with_trips() after thermal zone
registration, for example by storing them in local variables which are
automatically discarded when the zone registration is complete.

Also make some additional code simplifications unlocked by the above
changes.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-23 18:24:47 +01:00
Rafael J. Wysocki
9686f04a7b thermal: ACPI: Discard trips table after zone registration
Because the thermal core creates and uses its own copy of the trips
table passed to thermal_zone_device_register_with_trips(), it is not
necessary to hold on to a local copy of it any more after the given
thermal zone has been registered.

Accordingly, modify the ACPI thermal driver to store the trips table
passed to thermal_zone_device_register_with_trips() in a local variable
which is automatically discarded when acpi_thermal_add() returns to
its caller.

Also make some additional code simplifications unlocked by the above
change.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-23 18:24:47 +01:00
Rafael J. Wysocki
9b0a627586 thermal: core: Store zone trips table in struct thermal_zone_device
The current code expects thermal zone creators to pass a pointer to a
writable trips table to thermal_zone_device_register_with_trips() and
that trips table is then used by the thermal core going forward.

Consequently, the callers of thermal_zone_device_register_with_trips()
are required to hold on to the trips table passed to it until the given
thermal zone is unregistered, at which point the trips table can be
freed, but at the same time they are not expected to access that table
directly.  This is both error prone and confusing.

To address it, turn the trips table pointer in struct thermal_zone_device
into a flex array (counted by its num_trips field), allocate it during
thermal zone device allocation and copy the contents of the trips table
supplied by the zone creator (which can be const now) into it, which
will allow the callers of thermal_zone_device_register_with_trips() to
drop their trip tables right after the zone registration.

This requires the imx thermal driver to be adjusted to store the new
temperature in its internal trips table in imx_set_trip_temp(), because
it will be separate from the core's trips table now and it has to be
explicitly kept in sync with the latter.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-23 18:24:47 +01:00
Linus Torvalds
e7768e65cd - Stable fixes for 3 DM targets (integrity, verity and crypt) to
address systemic failure that can occur if user provided pages map
   to the same block.
 
 - Fix DM crypt to not allow modifying data that being encrypted for
   authenticated encryption.
 
 - Fix DM crypt and verity targets to align their respective bvec_iter
   struct members to avoid the need for byte level access (due to
   __packed attribute) that is costly on some arches (like RISC).
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmXY0iwACgkQxSPxCi2d
 A1oG3Qf/WE0T5qyBnDZ7irhvJmSLVx4oAwzB0PmMtELZ3Tkyn7BBAxq1Q2I2UT3x
 r90d1uy/pz6Y+kZkAPZjYuYLctukEa1swpfFe0Sn01dBrbgGU/p2vi3fkF+ZK6/t
 n5EN8S5dkf6rIDmp8R56iP8mP4OEultYjLugxc6ROohFgHZicoqv+Pye9kHp0Y19
 HSW2eueag/s2nMa9HKjIEd3+NBgmGb0qMMf3M6CXpRLNi/f/cyHbPzq83+eW3gcg
 jl480w5YHk2nOUSqrO8UfIaP4BpD3SEXQxVqIzdkVX4cEBO4yRcBNrQpsT89GsXj
 sg5zinkq3g7SThEpQWdpkeZMR/6q/A==
 =n0nQ
 -----END PGP SIGNATURE-----

Merge tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Stable fixes for 3 DM targets (integrity, verity and crypt) to
   address systemic failure that can occur if user provided pages map to
   the same block.

 - Fix DM crypt to not allow modifying data that being encrypted for
   authenticated encryption.

 - Fix DM crypt and verity targets to align their respective bvec_iter
   struct members to avoid the need for byte level access (due to
   __packed attribute) that is costly on some arches (like RISC).

* tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-crypt, dm-integrity, dm-verity: bump target version
  dm-verity, dm-crypt: align "struct bvec_iter" correctly
  dm-crypt: recheck the integrity tag after a failure
  dm-crypt: don't modify the data when using authenticated encryption
  dm-verity: recheck the hash after a failure
  dm-integrity: recheck the integrity tag after a failure
2024-02-23 09:23:54 -08:00
Rafael J. Wysocki
2c8459a568 Merge branch 'thermal-core'
Merge thermal core changes for 6.9:

 - Minor fixes for thermal governors (Rafael J. Wysocki, Di Shen).

 - Trip point handling fixes for the iwlwifi wireless driver (Rafael J.
   Wysocki).

 - Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno).

* thermal-tmp:
  thermal: gov_power_allocator: Avoid overwriting PID coefficients from setup time
  thermal: sysfs: Fix up white space in trip_point_temp_store()
  iwlwifi: mvm: Use for_each_thermal_trip() for walking trip points
  iwlwifi: mvm: Populate trip table before registering thermal zone
  iwlwifi: mvm: Drop unused fw_trips_index[] from iwl_mvm_thermal_device
  thermal: core: Change governor name to const char pointer
  thermal: gov_bang_bang: Fix possible cooling device state ping-pong
  thermal: gov_fair_share: Fix dependency on trip points ordering
2024-02-23 18:22:46 +01:00
Richard Fitzgerald
cfa43aaa79
ALSA: hda: cs35l56: Apply amp calibration from EFI data
If there are factory calibration settings in EFI, extract the
settings and write them to the firmware calibration controls.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-23 17:21:42 +00:00