For simple filesystems that use directory offset mapping, rely
strictly on the directory offset map to tell when a directory has
no children.
After this patch is applied, the emptiness test holds only the RCU
read lock when the directory being tested has no children.
In addition, this adds another layer of confirmation that
simple_offset_add/remove() are working as expected.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820143463.6328.7872919188371286951.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Liam and Matthew say that once the RCU read lock is released,
xa_state is not safe to re-use for the next xas_find() call. But the
RCU read lock must be released on each loop iteration so that
dput(), which might_sleep(), can be called safely.
Thus we are forced to walk the offset tree with fresh state for each
directory entry. xa_find() can do this for us, though it might be a
little less efficient than maintaining xa_state locally.
We believe that in the current code base, inode->i_rwsem provides
protection for the xa_state maintained in
offset_iterate_dir(). However, there is no guarantee that will
continue to be the case in the future.
Since offset_iterate_dir() doesn't build xa_state locally any more,
there's no longer a strong need for offset_find_next(). Clean up by
rolling these two helpers together.
Suggested-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Message-ID: <170785993027.11135.8830043889278631735.stgit@91.116.238.104.host.secureserver.net>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820142021.6328.15047865406275957018.stgit@91.116.238.104.host.secureserver.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
processed: The number of bytes processed by the body in the
most recent iteration, or a negative errno. 0 causes the iteration to
stop.
The processed is useful to check when the loop breaks.
Signed-off-by: Kassey Li <quic_yingangl@quicinc.com>
Link: https://lore.kernel.org/r/20240219021138.3481763-1-quic_yingangl@quicinc.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since commit fd07e0aa23c4 ("iomap: map multiple blocks at a time"), we
could map multi-blocks once a time, and the dirty_len indicates the
expected map length, map_len won't large than it. The pos and dirty_len
means the dirty range that should be mapped to write, add them into
trace_iomap_writepage_map() could be more useful for debug.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20240220115759.3445025-1-yi.zhang@huaweicloud.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 1fd4a5a36f ("drm/connector: Rename legacy TV property") failed
to update all the users of the struct drm_tv_connector_state mode field,
which resulted in a build failure in i915.
However, a subsequent commit in the same series reintroduced a mode
field in that structure, with a different semantic but the same type,
with the assumption that all previous users were updated.
Since that didn't happen, the i915 driver now compiles, but mixes
accesses to the legacy_mode field and the newer mode field, but with the
previous semantics.
This obviously doesn't work very well, so we need to update the accesses
that weren't in the legacy renaming commit.
Fixes: 1fd4a5a36f ("drm/connector: Rename legacy TV property")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220131251.453060-1-mripard@kernel.org
(cherry picked from commit bf7626f19d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
There is a copy and paste bug here so it checks "ev_ring_el_cache" instead
of "ring_item_cache".
Fixes: 62210a26cd ("bus: mhi: ep: Use slab allocator where applicable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/bebcd822-d465-45da-adae-5435ec93e6d4@moroto.mountain
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
A data corruption problem was reported by CoreOS image builders
when using reflink based disk image copies and then converting
them to qcow2 images. The converted images failed the conversion
verification step, and it was isolated down to the fact that
qemu-img uses SEEK_HOLE/SEEK_DATA to find the data it is supposed to
copy.
The reproducer allowed me to isolate the issue down to a region of
the file that had overlapping data and COW fork extents, and the
problem was that the COW fork extent was being reported in it's
entirity by xfs_seek_iomap_begin() and so skipping over the real
data fork extents in that range.
This was somewhat hidden by the fact that 'xfs_bmap -vvp' reported
all the extents correctly, and reading the file completely (i.e. not
using seek to skip holes) would map the file correctly and all the
correct data extents are read. Hence the problem is isolated to just
the xfs_seek_iomap_begin() implementation.
Instrumentation with trace_printk made the problem obvious: we are
passing the wrong length to xfs_trim_extent() in
xfs_seek_iomap_begin(). We are passing the end_fsb, not the
maximum length of the extent we want to trim the map too. Hence the
COW extent map never gets trimmed to the start of the next data fork
extent, and so the seek code treats the entire COW fork extent as
unwritten and skips entirely over the data fork extents in that
range.
Link: https://github.com/coreos/coreos-assembler/issues/3728
Fixes: 60271ab79d ("xfs: fix SEEK_DATA for speculative COW fork preallocation")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The expectation is that cxl_parse_cfwms() continues in the face the of
failure as evidenced by code like:
cxlrd = cxl_root_decoder_alloc(root_port, ways, cxl_calc_hb);
if (IS_ERR(cxlrd))
return 0;
There are other error paths in that function which mistakenly follow
idiomatic expectations and return an error when they should not. Most of
those mistakes are innocuous checks that hardly ever fail in practice.
However, a recent change succeed in making the implementation more
fragile by applying an idiomatic, but still wrong "fix" [1]. In this
failure case the kernel reports:
cxl root0: Failed to populate active decoder targets
cxl_acpi ACPI0017:00: Failed to add decode range: [mem 0x00000000-0x7fffffff flags 0x200]
...which is a real issue with that one window (to be fixed separately),
but ends up failing the entirety of cxl_acpi_probe().
Undo that recent breakage while also removing the confusion about
ignoring errors. Update all exits paths to return an error per typical
expectations and let an outer wrapper function handle dropping the
error.
Fixes: 91019b5bc7 ("cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()") [1]
Cc: <stable@vger.kernel.org>
Cc: Breno Leitao <leitao@debian.org>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Initial tests with the CXL CPER implementation identified that error
reports were being duplicated in the log and the trace event [1]. Then
it was discovered that the notification handler took sleeping locks
while the GHES event handling runs in spin_lock_irqsave() context [2]
While the duplicate reporting was fixed in v6.8-rc4, the fix for the
sleeping-lock-vs-atomic collision would enjoy more time to settle and
gain some test cycles. Given how late it is in the development cycle,
remove the CXL hookup for now and try again during the next merge
window.
Note that end result is that v6.8 does not emit CXL CPER payloads to the
kernel log, but this is in line with the CXL trend to move error
reporting to trace events instead of the kernel log.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: http://lore.kernel.org/r/20240108165855.00002f5a@Huawei.com [1]
Closes: http://lore.kernel.org/r/b963c490-2c13-4b79-bbe7-34c6568423c7@moroto.mountain [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
These functions aren't used anymore, so get rid of them.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Convert xfarray_pagesort to handle large folios by introducing a new
xfile_get_folio routine that can return a folio of arbitrary size, and
using heapsort on the full folio. This also corrects an off-by-one bug
in the calculation of len in xfarray_pagesort that was papered over by
xfarray_want_pagesort.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfiles are shmem files, not memfds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Now that xfile pages don't need kmapping, there is no need to cache
the kernel virtual address for them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Add helper similar to file_{get,set}_page, but which deal with folios
and don't allocate new folio unless explicitly asked to, which map
to shmem_get_folio instead of calling into the aops.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Switch to using shmem_get_folio in xfile_load instead of using
shmem_read_mapping_page_gfp. This gets us support for large folios
and also optimized reading from unallocated space, as
shmem_get_folio with SGP_READ won't allocate a page for them just
to zero the content.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Switch to using shmem_get_folio and manually dirtying the page instead
of abusing aops->write_begin and aops->write_end in xfile_get_page.
This simplifies the code by not doing indirect calls of not actually
exported interfaces that don't really fit the use case very well, and
happens to get us large folio support for free.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
XFS is generally used on 64-bit, non-highmem platforms and xfile
mappings are accessed all the time. Reduce our pain by not allowing
any highmem mappings in the xfile page cache and remove all the kmap
calls for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_read_mapping_page_gfp always returns an uptodate page or an
ERR_PTR. Remove the code that tries to handle a non-uptodate page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
All current and pending xfile users use the xfile_obj_load
and xfile_obj_store API, so make those the actual implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
vfs_getattr is needed to query inode attributes for unknown underlying
file systems. But shmemfs is well known for users of shmem_file_setup
and shmem_read_mapping_page_gfp that rely on it not needing specific
inode revalidation and having a normal mapping. Remove the detour
through the getattr method and an extra wrapper, and just read the
inode size and i_bytes directly in the scrub tracing code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_file_setup is explicitly intended for a file that can be
fully read and written by kernel users without restrictions. Don't
poke into internals to change random flags in the file or inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_kernel_file_setup is equivalent to shmem_file_setup except that it
already sets the S_PRIVATE flag. Use it instead of open coding the
logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_file_setup always returns a struct file pointer or an ERR_PTR,
so remove the code to check for a NULL return.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfile_create creates a (potentially large) sparse file. Pass
VM_NORESERVE to shmem_file_setup to not account for the entire file size
at file creation time.
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Add a blurb that simply dirtying the folio will persist data for in-kernel
shmem files. This is what most of the callers already do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
XFS wants to use this for it's internal in-memory data structures and
currently duplicates the functionality. Export shmem_kernel_file_setup
to allow XFS to switch over to using the proper kernel API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Export shmem_get_folio as a slightly lower-level variant of
shmem_read_folio_gfp. This will be useful for XFS xfile use cases
that want to pass SGP_NOALLOC or get a locked page, which the thin
shmem_read_folio_gfp wrapper can't provide.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Move the check that the inode really is a shmemfs one from
shmem_read_folio_gfp to shmem_get_folio_gfp given that shmem_get_folio
can also be called from outside of shmem.c. Also turn it into a
WARN_ON_ONCE and error return instead of BUG_ON to be less severe.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Set the a_ops in shmem_symlink before reading a folio from the mapping
to prepare for asserting that shmem_get_folio is only called on shmem
mappings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_aops really should not be exported to the world. Move
shmem_mapping and export it as internal for the one semi-legitimate
modular user in udmabuf.
This effectively reverts commit 30e6a51dbb ("mm/shmem.c: make
shmem_mapping() inline"). which added a bogus shmem_aops non-GPL export
for no reason whatsoever as there as no shmem_mapping call outside of
core MM code at that point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
mapping_set_update is only used inside mm/. Move mapping_set_update to
mm/internal.h and turn it into an inline function instead of a macro.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This reverts commit 3316ab2b45.
The MHI spec owner pointed out that the SOC_HW_VERSION register is part
of the BHIe segment, and only valid on devices which implement BHIe.
Only a small subset of MHI devices implement BHIe so blindly accessing
the register for all devices is not correct. Also, since the BHIe
segment offset is not used when accessing the register, any
implementation which moves the BHIe segment will result in accessing
some other register. We've seen that accessing this register on AIC100
which does not support BHIe can result in initialization failures.
We could try to put checks into the code to address these issues, but in
the roughly 4 years this functionality has existed, no one has used it.
Easier to drop this dead code and address the issues if anyone comes up
with a real world use for it.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240219180748.1591527-1-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- set_work_data() takes a separate @flags argument but just ORs it to @data.
This is more confusing than helpful. Just take @data.
- Use the name @flags consistently and add the parameter to
set_work_pool_and_{keep|clear}_pending(). This will be used by the planned
disable/enable support.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
clear_work_data() is only used in one place and immediately followed by
smp_mb(), making it equivalent to set_work_pool_and_clear_pending() w/
WORK_OFFQ_POOL_NONE for @pool_id. Drop it. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The planned disable/enable support will need the same logic. Let's factor it
out. No functional changes.
v2: Update function comment to include @irq_flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The bits of work->data are used for a few different purposes. How the bits
are used is determined by enum work_bits. The planned disable/enable support
will add another use, so let's clean it up a bit in preparation.
- Let WORK_STRUCT_*_BIT's values be determined by enum definition order.
- Deliminate different bit sections the same way using SHIFT and BITS
values.
- Rename __WORK_OFFQ_CANCELING to WORK_OFFQ_CANCELING_BIT for consistency.
- Introduce WORK_STRUCT_PWQ_SHIFT and replace WORK_STRUCT_FLAG_MASK and
WORK_STRUCT_WQ_DATA_MASK with WQ_STRUCT_PWQ_MASK for clarity.
- Improve documentation.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The cancel path used bool @is_dwork to distinguish canceling a regular work
and a delayed one. The planned disable/enable support will need passing
around another flag in the code path. As passing them around with bools will
be confusing, let's introduce named flags to pass around in the cancel path.
WORK_CANCEL_DELAYED replaces @is_dwork. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Using the generic term `flags` for irq flags is conventional but can be
confusing as there's quite a bit of code dealing with work flags which
involves some subtleties. Let's use a more explicit name `irq_flags` for
local irq flags. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
They are currently a bit disorganized with flush and cancel functions mixed.
Reoranize them so that flush functions come first, cancel next and
cancel_sync last. This way, we won't have to add prototypes for internal
functions for the planned disable/enable support.
This is pure code reorganization. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
__cancel_work_timer() is used to implement cancel_work_sync() and
cancel_delayed_work_sync(), similarly to how __cancel_work() is used to
implement cancel_work() and cancel_delayed_work(). ie. The _timer part of
the name is a complete misnomer. The difference from __cancel_work() is the
fact that it syncs against work item execution not whether it handles timers
or not.
Let's rename it to less confusing __cancel_work_sync(). No functional
change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The different flavors of RCU read critical sections have been unified. Let's
update the locking assertion macros accordingly to avoid requiring
unnecessary explicit rcu_read_[un]lock() calls.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reorder some global declarations and adjust comments and whitespaces for
clarity and consistency. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
KFENCE is not a security mitigation mechanism (due to sampling), but has
the performance characteristics of unintrusive hardening techniques.
When used at scale, however, it improves overall security by allowing
kernel developers to detect heap memory-safety bugs cheaply.
Link: https://lkml.kernel.org/r/79B9A832-B3DE-4229-9D87-748B2CFB7D12@kernel.org
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20240212130116.997627-1-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit 94f8f319cb ("drm: Remove Kconfig option for legacy support
(CONFIG_DRM_LEGACY)") removes the config DRM_LEGACY, but one reference to
that config is left in the hardening.config fragment.
As there is no drm legacy driver left, we do not need to recommend this
attack surface reduction anymore.
Drop this reference in hardening.config fragment.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20240208091045.9219-3-lukas.bulwahn@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit 7a628f818499 ("ubsan: Remove CONFIG_UBSAN_SANITIZE_ALL") removes the
config UBSAN_SANITIZE_ALL, but one reference to that config is left in the
hardening.config fragment.
Drop this reference in hardening.config fragment.
Note that CONFIG_UBSAN is still enabled in the hardening.config fragment,
so the functionality when using this fragment remains the same.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20240208091045.9219-2-lukas.bulwahn@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
The ARCH=um build has its own idea about strscpy()'s definition. Adjust
the callers to remove the redundant sizeof() arguments ahead of treewide
changes, since it needs a manual adjustment for the newly named
sized_strscpy() export.
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>