Move to the IIO backend framework. Devices supported by adi-axi-adc now
register themselves as backend devices.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-7-f5242a5fb42a@analog.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the driver to use the new IIO backend framework. The device
functionality is expected to be the same (meaning no added or removed
features).
Also note this patch effectively breaks ABI and that's needed so we can
properly support this device and add needed features making use of the
new IIO framework.
Given the lack of features (and devices supported) in the ad9467 driver
compared with the ADI out of tree version, we don't expect any user of
the upstream driver so no one should notice the ABI breakage. However,
if someone is affected by this, ADI will happily support transitioning
to the backend framework.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-6-f5242a5fb42a@analog.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a Framework to handle complex IIO aggregate devices.
The typical architecture is to have one device as the frontend device which
can be "linked" against one or multiple backend devices. All the IIO and
userspace interface is expected to be registers/managed by the frontend
device which will callback into the backends when needed (to get/set
some configuration that it does not directly control).
The basic framework interface is pretty simple:
- Backends should register themselves with @devm_iio_backend_register()
- Frontend devices should get backends with @devm_iio_backend_get()
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-5-f5242a5fb42a@analog.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Export iio_dmaengine_buffer_free() and iio_dmaengine_buffer_alloc().
This is in preparation of introducing IIO backends support. This will
allow us to allocate a buffer and control it's lifetime from a device
different from the one holding the DMA firmware properties. Effectively,
in this case the struct device holding the firmware information about
the DMA channels is not the same as iio_dev->dev.parent (typical case).
While at it, namespace the buffer-dmaengine exports and update the
current user of these buffers.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-4-f5242a5fb42a@analog.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for creating device links out of more DT properties.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-3-f5242a5fb42a@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
'adi,adc-dev' is now deprecated and must not be used anymore. Hence,
also remove it from being required.
The reason why it's being deprecated is because the axi-adc CORE is now
an IIO service provider hardware (IIO backends) for consumers to make use
of. Before, the logic with 'adi,adc-dev' was the opposite (it was kind
of consumer referencing other nodes/devices) and that proved to be wrong
and to not scale.
Now, IIO consumers of this hardware are expected to reference it using the
io-backends property. Hence, the new '#io-backend-cells' is being added
so the device is easily identified as a provider.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-2-f5242a5fb42a@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad9467 will make use of the new IIO backend framework which is a
provider - consumer interface where IIO backends provide services to
consumers. As such, and being this device a consumer, add the new
generic io-backend property to the bindings.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240210-iio-backend-v11-1-f5242a5fb42a@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The loop based 64bit division may run for a long time when dividend is a
lot bigger than the divider. Replace the division loop by the
div64_u64() which implementation may be significantly faster.
Tested-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 38416c28e1 ("iio: light: Add gain-time-scale helpers")
Link: https://lore.kernel.org/r/Zcn-6e-0-nh2WcfU@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Ignore all clocks which are assigned to a non-Linux system,
- Add watchdog clock on RZ/G3S,
- Add camera (CRU) clock and reset on RZ/G2UL,
- Add support for the R-Car V4M (R8A779H0) SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZcY1fgAKCRCKwlD9ZEnx
cEgUAQC2Zqdedl1tozaGpPvs1BdlrsVPi1jD7WsYbrTf0Qc+4wEAp/UZgL3n0pCd
7eefQvgG6cZE0tXr2khREE6FAKUD2QM=
=2qR5
-----END PGP SIGNATURE-----
Merge tag 'renesas-clk-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull Renesas clk driver updates from Geert Uytterhoeven:
- Ignore all clocks which are assigned to a non-Linux system
- Add watchdog clock on RZ/G3S
- Add camera (CRU) clock and reset on RZ/G2UL
- Add support for the R-Car V4M (R8A779H0) SoC
- Miscellaneous fixes and improvements
* tag 'renesas-clk-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r8a779h0: Add I2C clocks
clk: renesas: r8a779h0: Add watchdog clock
clk: renesas: r8a779h0: Add PFC/GPIO clocks
clk: renesas: r8a779g0: Fix PCIe clock name
clk: renesas: cpg-mssr: Add support for R-Car V4M
clk: renesas: rcar-gen4: Add support for FRQCRC1
clk: renesas: r9a07g043: Add clock and reset entries for CRU
clk: renesas: r9a08g045: Add clock and reset support for watchdog
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
clk: renesas: mstp: Remove obsolete clkdev registration
clk: renesas: cpg-mssr: Ignore all clocks assigned to non-Linux system
of: Add for_each_reserved_child_of_node()
of: Add of_get_next_status_child() and makes more generic of_get_next
of: Add __of_device_is_status() and makes more generic status check
resctrl has one mutex that is taken by the architecture-specific code, and the
filesystem parts. The two interact via cpuhp, where the architecture code
updates the domain list. Filesystem handlers that walk the domains list should
not run concurrently with the cpuhp callback modifying the list.
Exposing a lock from the filesystem code means the interface is not cleanly
defined, and creates the possibility of cross-architecture lock ordering
headaches. The interaction only exists so that certain filesystem paths are
serialised against CPU hotplug. The CPU hotplug code already has a mechanism to
do this using cpus_read_lock().
MPAM's monitors have an overflow interrupt, so it needs to be possible to walk
the domains list in irq context. RCU is ideal for this, but some paths need to
be able to sleep to allocate memory.
Because resctrl_{on,off}line_cpu() take the rdtgroup_mutex as part of a cpuhp
callback, cpus_read_lock() must always be taken first.
rdtgroup_schemata_write() already does this.
Most of the filesystem code's domain list walkers are currently protected by
the rdtgroup_mutex taken in rdtgroup_kn_lock_live(). The exceptions are
rdt_bit_usage_show() and the mon_config helpers which take the lock directly.
Make the domain list protected by RCU. An architecture-specific lock prevents
concurrent writers. rdt_bit_usage_show() could walk the domain list using RCU,
but to keep all the filesystem operations the same, this is changed to call
cpus_read_lock(). The mon_config helpers send multiple IPIs, take the
cpus_read_lock() in these cases.
The other filesystem list walkers need to be able to sleep. Add
cpus_read_lock() to rdtgroup_kn_lock_live() so that the cpuhp callbacks can't
be invoked when file system operations are occurring.
Add lockdep_assert_cpus_held() in the cases where the rdtgroup_kn_lock_live()
call isn't obvious.
Resctrl's domain online/offline calls now need to take the rdtgroup_mutex
themselves.
[ bp: Fold in a build fix: https://lore.kernel.org/r/87zfvwieli.ffs@tglx ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-25-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Debugging ID register setup can be a complicated affair. Give the
kernel hacker a way to dump that state in an easy to parse way.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-27-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As KVM now strongly relies on accurately handling the RES0/RES1 bits
on a number of paths, add a compile-time checker that will blow in
the face of the innocent bystander, should they try to sneak in an
update that changes any of these RES0/RES1 fields.
It is expected that such an update will come with the relevant
KVM update if needed.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-26-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We unconditionally enable FEAT_MOPS, which is obviously wrong.
So let's only do that when it is advertised to the guest.
Which means we need to rely on a per-vcpu HCRX_EL2 shadow register.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-25-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
No AMU? No AMU! IF we see an AMU-related trap, let's turn it into
an UNDEF!
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-24-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As part of the ongoing effort to honor the guest configuration,
add the necessary checks to make PIR_EL1 and co UNDEF if not
advertised to the guest, and avoid context switching them.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-23-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Outer Shareable and Range TLBI instructions shouldn't be made available
to the guest if they are not advertised. Use FGU to disable those,
and set HCR_EL2.TLBIOS in the case the host doesn't have FGT. Note
that in that later case, we cannot efficiently disable TLBI Range
instructions, as this would require to trap all TLBIs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-22-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The way we save/restore HFG[RW]TR_EL2 can now be simplified, and
the Ampere erratum hack is the only thing that still stands out.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-21-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We already trap a bunch of existing features for the purpose of
disabling them (MAIR2, POR, ACCDATA, SME...).
Let's move them over to our brand new FGU infrastructure.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-20-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to correctly honor our FGU bits, they must be converted
into a set of FGT bits. They get merged as part of the existing
FGT setting.
Similarly, the UNDEF injection phase takes place when handling
the trap.
This results in a bit of rework in the FGT macros in order to
help with the code generation, as burying per-CPU accesses in
macros results in a lot of expansion, not to mention the vcpu->kvm
access on nvhe (kern_hyp_va() is not optimisation-friendly).
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-19-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to efficiently handle system register access being disabled,
and this resulting in an UNDEF exception being injected, we introduce
the (slightly dubious) concept of Fine-Grained UNDEF, modeled after
the architectural Fine-Grained Traps.
For each FGT group, we keep a 64 bit word that has the exact same
bit assignment as the corresponding FGT register, where a 1 indicates
that trapping this register should result in an UNDEF exception being
reinjected.
So far, nothing populates this information, nor sets the corresponding
trap bits.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-18-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
__check_nv_sr_forward() is not specific to NV anymore, and does
a lot more. Rename it to triage_sysreg_trap(), making it plain
that its role is to handle where an exception is to be handled.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-17-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Since we always start sysreg/sysinsn handling by searching the
xarray, use it as the source of the index in the correct sys_reg_desc
array.
This allows some cleanup, such as moving the handling of unknown
sysregs in a single location.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-16-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to reduce the number of lookups that we have to perform
when handling a sysreg, register each AArch64 sysreg descriptor
with the global xarray. The index of the descriptor is stored
as a 10 bit field in the data word.
Subsequent patches will retrieve and use the stored index.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As we are going to rely more and more on the global xarray that
contains the trap configuration, always populate it, even in the
non-NV case.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-14-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As NV results in a bunch of system instructions being trapped, it makes
sense to pull the system instructions into their own little array, where
they will eventually be joined by AT, TLBI and a bunch of other CMOs.
Based on an initial patch by Jintack Lim.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-13-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Now that we don't use xa_store_range() anymore, drop the added
complexity of XARRAY_MULTI for KVM. It is likely still pulled
in by other bits of the kernel though.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-12-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to be able to store different values for member of an
encoding range, replace xa_store_range() calls with discrete
xa_store() calls and an encoding iterator.
We end-up using a bit more memory, but we gain some flexibility
that we will make use of shortly.
Take this opportunity to tidy up the error handling path.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Negative trap bits are a massive pain. They are, on the surface,
indistinguishable from RES0 bits. Do you trap? or do you ignore?
Thankfully, we now have the right infrastructure to check for RES0
bits as long as the register is backed by VNCR, which is the case
for the FGT registers.
Use that information as a discriminant when handling a trap that
is potentially caused by a FGT.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
There is no reason to have separate FGT group identifiers for
the debug fine grain trapping. The sole requirement is to provide
the *names* so that the SR_FGF() macro can do its magic of picking
the correct bit definition.
So let's alias HDFGWTR_GROUP and HDFGRTR_GROUP.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Now that we have the infrastructure to enforce a sanitised register
value depending on the VM configuration, drop the helper that only
used the architectural RES0 value.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Just like its little friends, HCRX_EL2 gets the feature set treatment
when backed by VNCR.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Fine Grained Traps are controlled by a whole bunch of features.
Each one of them must be checked and the corresponding masks
computed so that we don't let the guest apply traps it shouldn't
be using.
This takes care of HFG[IRW]TR_EL2, HDFG[RW]TR_EL2, and HAFGRTR_EL2.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We can now start making use of our sanitising masks by setting them
to values that depend on the guest's configuration.
First up are VTTBR_EL2, VTCR_EL2, VMPIDR_EL2 and HCR_EL2.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
VNCR-backed "registers" are actually only memory. Which means that
there is zero control over what the guest can write, and that it
is the hypervisor's job to actually sanitise the content of the
backing store. Yeah, this is fun.
In order to preserve some form of sanity, add a repainting mechanism
that makes use of a per-VM set of RES0/RES1 masks, one pair per VNCR
register. These masks get applied on access to the backing store via
__vcpu_sys_reg(), ensuring that the state that is consumed by KVM is
correct.
So far, nothing populates these masks, but stay tuned.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to make it easier to check whether a particular feature
is exposed to a guest, add a new set of helpers, with kvm_has_feat()
being the most useful.
Let's start making use of them in the PMU code (courtesy of Oliver).
Follow-up changes will introduce additional use patterns.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Co-developed--by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Despite having the control bits for FEAT_SPECRES and FEAT_PACM,
the ID registers fields are either incomplete or missing.
Fix it.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
smp_processor_id family of macros never accepted any arguments.
#define __smp_processor_id(x)
works by accident (see C99 6.10.3 §4). __smp_processor_id() gets
1 (empty) argument and passes it down to raw_smp_processor_id()
which doesn't accept arguments.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/0037d1f2-8153-4b33-b43e-f4b6ecd710ac@p183
cpu_possible_mask is by definition "cpus which could be hotplugged without
reboot". It's a property which is fixed after kernel enumerates the
hardware configuration.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/41cd78af-92a3-4f23-8c7a-4316a04a66d8@p183
The pointer 'data' being initialized with a value that is never read, it
is being re-assigned inside a while-loop. The initialization is redundant
and can be removed.
Cleans up clang scan build warning
sound/soc/codecs/tas2781-fmwlib.c:1534:17: warning: Value stored to
'data' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240216142219.2109050-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The soundwire-amd driver has a bit of a layering violation requiring
the SOF driver to directly call into its exported symbols rather than
through an abstraction.
The SND_SOC_SOF_AMD_SOUNDWIRE Kconfig symbol tries to deal with the
dependency by selecting SOUNDWIRE_AMD in a complicated set of conditions,
but gets it wrong for a configuration involving SND_SOC_SOF_AMD_COMMON=y,
SND_SOC_SOF_AMD_ACP63=m, and SND_SOC_SOF_AMD_SOUNDWIRE_LINK_BASELINE=m
SOUNDWIRE_AMD=m, which results in a link failure:
ld.lld: error: undefined symbol: sdw_amd_get_slave_info
>>> referenced by acp-common.c
ld.lld: error: undefined symbol: amd_sdw_scan_controller
ld.lld: error: undefined symbol: sdw_amd_probe
ld.lld: error: undefined symbol: sdw_amd_exit
>>> referenced by acp.c
>>> sound/soc/sof/amd/acp.o:(amd_sof_acp_remove) in archive vmlinux.a
In essence, the SND_SOC_SOF_AMD_COMMON option cannot be built-in when
trying to link against a modular SOUNDWIRE_AMD driver.
Since CONFIG_SOUNDWIRE_AMD is a user-visible option, it really should
never be selected by another driver in the first place, so replace the
extra complexity with a normal Kconfig dependency in SND_SOC_SOF_AMD_SOUNDWIRE,
plus a top-level check that forbids any of the AMD SOF drivers from being
built-in with CONFIG_SOUNDWIRE_AMD=m.
In normal configs, they should all either be built-in or all loadable
modules anyway, so this simplification does not limit any real usecases.
Fixes: d948218424 ("ASoC: SOF: amd: add code for invoking soundwire manager helper functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240219093900.644574-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add machine select logic for SoundWire interface and create a machine
device node based on ACP PDM/SoundWire configuration.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240214104014.1144668-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Consider the below scenario, When ACP and SoundWire managers are in
D3 state and SoundWire manager power off mode is selected and acp and
SoundWire manager instances are in runtime suspended state.
In this case, for the ACP PME wake event, the ACP PCI driver should resume
SoundWire manager devices based on wake enable status set.
Add code for handling ACP PME wake event for runtime suspend scenario
when SoundWire power off mode is selected.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240214104014.1144668-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The earlier acp_reset flag is set to true in two instances as mentioned
below.
1. When active SoundWire manager instances power mode is set to
Power off mode when SoundWire configuration is selected.
2. For other acp configurations
As code being refactored and common function being used for scanning
SoundWire controller, acp_reset flag update logic is dropped.
Instead of it, check the SoundWire manager instance enable state, based on
it update sdw_en_stat flag which will be used to apply ACP init/de-init
sequence during suspend/resume callbacks based on flag set value when
SoundWire configuration is selected.
For other acp configurations, acp init/de-init will be called by default.
Refactor existing pm ops logic for SoundWire configuration and use
sdw_en_stat flag for invoking acp init/de-init sequence.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240214104014.1144668-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>