Commit graph

1,264,895 commits

Author SHA1 Message Date
Roberto Sassu
779cb1947e evm: Align evm_inode_post_setxattr() definition with LSM infrastructure
Change evm_inode_post_setxattr() definition, so that it can be registered
as implementation of the inode_post_setxattr hook.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:41 -05:00
Roberto Sassu
2b6a4054f8 evm: Align evm_inode_setxattr() definition with LSM infrastructure
Change evm_inode_setxattr() definition, so that it can be registered as
implementation of the inode_setxattr hook.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:40 -05:00
Roberto Sassu
784111d009 evm: Align evm_inode_post_setattr() definition with LSM infrastructure
Change evm_inode_post_setattr() definition, so that it can be registered as
implementation of the inode_post_setattr hook (to be introduced).

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:40 -05:00
Roberto Sassu
fec5f85e46 ima: Align ima_post_read_file() definition with LSM infrastructure
Change ima_post_read_file() definition, by making "void *buf" a
"char *buf", so that it can be registered as implementation of the
post_read_file hook.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:40 -05:00
Roberto Sassu
526864dd2f ima: Align ima_inode_removexattr() definition with LSM infrastructure
Change ima_inode_removexattr() definition, so that it can be registered as
implementation of the inode_removexattr hook.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:39 -05:00
Roberto Sassu
fbd0506e5c ima: Align ima_inode_setxattr() definition with LSM infrastructure
Change ima_inode_setxattr() definition, so that it can be registered as
implementation of the inode_setxattr hook.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:39 -05:00
Roberto Sassu
0298c5a9b1 ima: Align ima_file_mprotect() definition with LSM infrastructure
Change ima_file_mprotect() definition, so that it can be registered
as implementation of the file_mprotect hook.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:38 -05:00
Roberto Sassu
bad5247a2c ima: Align ima_inode_post_setattr() definition with LSM infrastructure
Change ima_inode_post_setattr() definition, so that it can be registered as
implementation of the inode_post_setattr hook (to be introduced).

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:38 -05:00
Dave Airlie
38df7e5e6c A suspend/resume error fix for ivpu, a couple of scheduler fixes for
nouveau, a patch to support large page arrays in prime, a uninitialized
 variable fix in crtc, a locking fix in rockchip/vop2 and a buddy
 allocator error reporting fix.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZc3QIQAKCRDj7w1vZxhR
 xcKEAPwL2+B0A5ospkDPQanuxjAqxD9oj7f6rPL21douxs1RiAEA8QjLka/2VeDo
 R4hHMXh8ZrhHPiv3R2WmPSD1+Uw7rQg=
 =2keo
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2024-02-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

A suspend/resume error fix for ivpu, a couple of scheduler fixes for
nouveau, a patch to support large page arrays in prime, a uninitialized
variable fix in crtc, a locking fix in rockchip/vop2 and a buddy
allocator error reporting fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4ffqzigtfh6cgzdpwuk6jlrv3dnk4hu6etiizgvibysqgtl2p@42n2gdfdd5eu
2024-02-16 14:33:38 +10:00
Steve French
4860abb91f smb: Fix regression in writes when non-standard maximum write size negotiated
The conversion to netfs in the 6.3 kernel caused a regression when
maximum write size is set by the server to an unexpected value which is
not a multiple of 4096 (similarly if the user overrides the maximum
write size by setting mount parm "wsize", but sets it to a value that
is not a multiple of 4096).  When negotiated write size is not a
multiple of 4096 the netfs code can skip the end of the final
page when doing large sequential writes, causing data corruption.

This section of code is being rewritten/removed due to a large
netfs change, but until that point (ie for the 6.3 kernel until now)
we can not support non-standard maximum write sizes.

Add a warning if a user specifies a wsize on mount that is not
a multiple of 4096 (and round down), also add a change where we
round down the maximum write size if the server negotiates a value
that is not a multiple of 4096 (we also have to check to make sure that
we do not round it down to zero).

Reported-by: R. Diez" <rdiez-2006@rd10.de>
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Suggested-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Acked-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Tested-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org # v6.3+
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2024-02-15 22:19:23 -06:00
Alexei Starovoitov
54d46c9f58 Merge branch 'fix-the-read-of-vsyscall-page-through-bpf'
Hou Tao says:

====================
Fix the read of vsyscall page through bpf

From: Hou Tao <houtao1@huawei.com>

Hi,

As reported by syzboot [1] and [2], when trying to read vsyscall page
by using bpf_probe_read_kernel() or bpf_probe_read(), oops may happen.

Thomas Gleixner had proposed a test patch [3], but it seems that no
formal patch is posted after about one month [4], so I post it instead
and add an Originally-by tag in patch #2.

Patch #1 makes is_vsyscall_vaddr() being a common helper. Patch #2 fixes
the problem by disallowing vsyscall page read for
copy_from_kernel_nofault(). Patch #3 adds one test case to ensure the
read of vsyscall page through bpf is rejected. Please see individual
patches for more details.

Comments are always welcome.

[1]: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com/
[2]: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com/
[3]: https://lore.kernel.org/bpf/87r0jwquhv.ffs@tglx/
[4]: https://lore.kernel.org/bpf/e24b125c-8ff4-9031-6c53-67ff2e01f316@huaweicloud.com/

Change Log:
v3:
 * rephrase commit message for patch #1 & #2 (Sohil)
 * reword comments in copy_from_kernel_nofault_allowed() (Sohil)
 * add Rvb tag for patch #1 and Acked-by tag for patch #3 (Sohil, Yonghong)

v2: https://lore.kernel.org/bpf/20240126115423.3943360-1-houtao@huaweicloud.com/
  * move is_vsyscall_vaddr to asm/vsyscall.h instead (Sohil)
  * elaborate on the reason for disallowing of vsyscall page read in
    copy_from_kernel_nofault_allowed() (Sohil)
  * update the commit message of patch #2 to more clearly explain how
    the oops occurs. (Sohil)
  * update the commit message of patch #3 to explain the expected return
    values of various bpf helpers (Yonghong)

v1: https://lore.kernel.org/bpf/20240119073019.1528573-1-houtao@huaweicloud.com/
====================

Link: https://lore.kernel.org/r/20240202103935.3154011-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-15 19:21:39 -08:00
Hou Tao
be66d79189 selftest/bpf: Test the read of vsyscall page under x86-64
Under x86-64, when using bpf_probe_read_kernel{_str}() or
bpf_probe_read{_str}() to read vsyscall page, the read may trigger oops,
so add one test case to ensure that the problem is fixed. Beside those
four bpf helpers mentioned above, testing the read of vsyscall page by
using bpf_probe_read_user{_str} and bpf_copy_from_user{_task}() as well.

The test case passes the address of vsyscall page to these six helpers
and checks whether the returned values are expected:

1) For bpf_probe_read_kernel{_str}()/bpf_probe_read{_str}(), the
   expected return value is -ERANGE as shown below:

bpf_probe_read_kernel_common
  copy_from_kernel_nofault
    // false, return -ERANGE
    copy_from_kernel_nofault_allowed

2) For bpf_probe_read_user{_str}(), the expected return value is -EFAULT
   as show below:

bpf_probe_read_user_common
  copy_from_user_nofault
    // false, return -EFAULT
    __access_ok

3) For bpf_copy_from_user(), the expected return value is -EFAULT:

// return -EFAULT
bpf_copy_from_user
  copy_from_user
    _copy_from_user
      // return false
      access_ok

4) For bpf_copy_from_user_task(), the expected return value is -EFAULT:

// return -EFAULT
bpf_copy_from_user_task
  access_process_vm
    // return 0
    vma_lookup()
    // return 0
    expand_stack()

The occurrence of oops depends on the availability of CPU SMAP [1]
feature and there are three possible configurations of vsyscall page in
the boot cmd-line: vsyscall={xonly|none|emulate}, so there are a total
of six possible combinations. Under all these combinations, the test
case runs successfully.

[1]: https://en.wikipedia.org/wiki/Supervisor_Mode_Access_Prevention

Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240202103935.3154011-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-15 19:21:39 -08:00
Hou Tao
32019c659e x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
When trying to use copy_from_kernel_nofault() to read vsyscall page
through a bpf program, the following oops was reported:

  BUG: unable to handle page fault for address: ffffffffff600000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0
  Oops: 0000 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
  RIP: 0010:copy_from_kernel_nofault+0x6f/0x110
  ......
  Call Trace:
   <TASK>
   ? copy_from_kernel_nofault+0x6f/0x110
   bpf_probe_read_kernel+0x1d/0x50
   bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d
   trace_call_bpf+0xc5/0x1c0
   perf_call_bpf_enter.isra.0+0x69/0xb0
   perf_syscall_enter+0x13e/0x200
   syscall_trace_enter+0x188/0x1c0
   do_syscall_64+0xb5/0xe0
   entry_SYSCALL_64_after_hwframe+0x6e/0x76
   </TASK>
  ......
  ---[ end trace 0000000000000000 ]---

The oops is triggered when:

1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall
page and invokes copy_from_kernel_nofault() which in turn calls
__get_user_asm().

2) Because the vsyscall page address is not readable from kernel space,
a page fault exception is triggered accordingly.

3) handle_page_fault() considers the vsyscall page address as a user
space address instead of a kernel space address. This results in the
fix-up setup by bpf not being applied and a page_fault_oops() is invoked
due to SMAP.

Considering handle_page_fault() has already considered the vsyscall page
address as a userspace address, fix the problem by disallowing vsyscall
page read for copy_from_kernel_nofault().

Originally-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+72aa0161922eba61b50e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240202103935.3154011-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-15 19:21:39 -08:00
Hou Tao
ee0e39a63b x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
Move is_vsyscall_vaddr() into asm/vsyscall.h to make it available for
copy_from_kernel_nofault_allowed() in arch/x86/mm/maccess.c.

Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240202103935.3154011-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-15 19:21:39 -08:00
Dave Airlie
9ac4beb757 drm-misc-next for v6.9:
UAPI Changes:
 
 Cross-subsystem Changes:
 
 arch:
 - powerpc/ps3: select CONFIG_VIDEO
 
 Core Changes:
 
 ci:
 - msm: fix apq8016 runner
 
 display:
 - use newer DRM print helpers
 
 documentation:
 - fix typos
 
 print:
 - add device-specific error and debug printers
 
 sysfb:
 - set Linux parent device for firmware framebuffer
 
 tests:
 - mm: use newer DRM print helpers
 
 Driver Changes:
 
 bridge:
 - switch to ->read_edid callback throughout the bridge
 drivers
 - remove old ->get_edid callback
 
 i915:
 - use newer DRM print helpers
 
 lima:
 - improve stability by fixes to error handling and recovery
 
 mediathek:
 - switch to ->read_edid callback
 
 msm:
 - switch to ->read_edid callback
 
 omap:
 - switch to ->read_edid callback
 
 panel:
 - add Powkiddy RGB10MAX3 plus DT bindings
 - st7703: support panel rotation plus DT bindings
 
 rockchip:
 - DT bindings: remove port, add power-domains
 
 xe:
 - use newer DRM print helpers
 
 xlnx:
 - switch to ->read_edid callback
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXOD/oACgkQaA3BHVML
 eiMWMAgArTVXF4UQ+FUxYZB5QTm2veYIpilvwmzaQLNxsM9SsWpzwMIVAi+xf93g
 uqUqkl6QvZ9pJg6bxuXRNcJw/GObIO4x6tn+LkbccczgHiHwvn6ydNdUoMx8ulne
 EsGC0z8bb5Gpwh9b/pnBul2AoIE7PHAJltgH271/O2xnhFMUbchQ0ckHvWnn8/GA
 Nef145ySX4gkYtY8u2TRr4r6Bkp7Tpiyv6ipU7Cpu7KqyveTDMx3c9r5FaiHnJT/
 Hx/5s87q0Bx2m+iNjlBLJzYjF2UWth+pbfiu3xwyWOE7hdkPLwCQ5mqHWcFFqxfb
 Vuj9jP+Vb68L7EvGpq2LArLdhZjHIQ==
 =SsjX
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2024-02-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.9:

UAPI Changes:

Cross-subsystem Changes:

arch:
- powerpc/ps3: select CONFIG_VIDEO

Core Changes:

ci:
- msm: fix apq8016 runner

display:
- use newer DRM print helpers

documentation:
- fix typos

print:
- add device-specific error and debug printers

sysfb:
- set Linux parent device for firmware framebuffer

tests:
- mm: use newer DRM print helpers

Driver Changes:

bridge:
- switch to ->read_edid callback throughout the bridge
drivers
- remove old ->get_edid callback

i915:
- use newer DRM print helpers

lima:
- improve stability by fixes to error handling and recovery

mediathek:
- switch to ->read_edid callback

msm:
- switch to ->read_edid callback

omap:
- switch to ->read_edid callback

panel:
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings

rockchip:
- DT bindings: remove port, add power-domains

xe:
- use newer DRM print helpers

xlnx:
- switch to ->read_edid callback

Signed-off-by: Dave Airlie <airlied@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXOD/oACgkQaA3BHVML
# eiMWMAgArTVXF4UQ+FUxYZB5QTm2veYIpilvwmzaQLNxsM9SsWpzwMIVAi+xf93g
# uqUqkl6QvZ9pJg6bxuXRNcJw/GObIO4x6tn+LkbccczgHiHwvn6ydNdUoMx8ulne
# EsGC0z8bb5Gpwh9b/pnBul2AoIE7PHAJltgH271/O2xnhFMUbchQ0ckHvWnn8/GA
# Nef145ySX4gkYtY8u2TRr4r6Bkp7Tpiyv6ipU7Cpu7KqyveTDMx3c9r5FaiHnJT/
# Hx/5s87q0Bx2m+iNjlBLJzYjF2UWth+pbfiu3xwyWOE7hdkPLwCQ5mqHWcFFqxfb
# Vuj9jP+Vb68L7EvGpq2LArLdhZjHIQ==
# =SsjX
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 15 Feb 2024 23:22:02 AEST
# gpg:                using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215132610.GA1464@localhost.localdomain
2024-02-16 13:16:40 +10:00
Jakub Kicinski
fc906e7922 Merge branch 'for-thermal-genetlink-family-bind-unbind-callbacks'
Stanislaw Gruszka says:

====================
thermal/netlink/intel_hfi: Enable HFI feature only when required

The patchset introduces a new genetlink family bind/unbind callbacks
and thermal/netlink notifications, which allow drivers to send netlink
multicast events based on the presence of actual user-space consumers.
This functionality optimizes resource usage by allowing disabling
of features when not needed.

v1: https://lore.kernel.org/linux-pm/20240131120535.933424-1-stanislaw.gruszka@linux.intel.com//
v2: https://lore.kernel.org/linux-pm/20240206133605.1518373-1-stanislaw.gruszka@linux.intel.com/
v3: https://lore.kernel.org/linux-pm/20240209120625.1775017-1-stanislaw.gruszka@linux.intel.com/
====================

Link: https://lore.kernel.org/r/20240212161615.161935-1-stanislaw.gruszka@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-15 17:49:24 -08:00
Stanislaw Gruszka
3de21a8990 genetlink: Add per family bind/unbind callbacks
Add genetlink family bind()/unbind() callbacks when adding/removing
multicast group to/from netlink client socket via setsockopt() or
bind() syscall.

They can be used to track if consumers of netlink multicast messages
emerge or disappear. Thus, a client implementing callbacks, can now
send events only when there are active consumers, preventing unnecessary
work when none exist.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240212161615.161935-2-stanislaw.gruszka@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-15 17:49:16 -08:00
Matthieu Baerts (NGI0)
3738d710af configs/debug: add NET debug config
The debug.config file is really great to easily enable a bunch of
general debugging features on a CI-like setup. But it would be great to
also include core networking debugging config.

A few CI's validating features from the Net tree also enable a few other
debugging options on top of debug.config. A small selection is quite
generic for the whole net tree. They validate some assumptions in
different parts of the core net tree. As suggested by Jakub Kicinski in
[1], having them added to this debug.config file would help other CIs
using network features to find bugs in this area.

Note that the two REFCNT configs also select REF_TRACKER, which doesn't
seem to be an issue.

Link: https://lore.kernel.org/netdev/20240202093148.33bd2b14@kernel.org/T/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240212-kconfig-debug-enable-net-v1-1-fb026de8174c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-15 17:46:53 -08:00
Peter Bergner
3281366a8e uapi/auxvec: Define AT_HWCAP3 and AT_HWCAP4 aux vector, entries
The powerpc toolchain keeps a copy of the HWCAP bit masks in the TCB
for fast access by the __builtin_cpu_supports() built-in function. The
TCB space for the HWCAP entries - which are created in pairs - is an ABI
extension, so waiting to create the space for HWCAP3 and HWCAP4 until
they are needed is problematic. Define AT_HWCAP3 and AT_HWCAP4 in the
generic uapi header so they can be used in glibc to reserve space in the
powerpc TCB for their future use.

I scanned through the Linux and GLIBC source codes looking for unused
AT_* values and 29 and 30 did not seem to be used, so they are what I
went with.

Signed-off-by: Peter Bergner <bergner@linux.ibm.com>
Acked-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/a406b535-dc55-4856-8ae9-5a063644a1af@linux.ibm.com
2024-02-16 12:42:59 +11:00
Uwe Kleine-König
4b26558415 macintosh: windfarm_rm31: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/42358a12b38c9498b8ab2896d4f3d4eb9484b45e.1704900449.git.u.kleine-koenig@pengutronix.de
2024-02-16 12:35:15 +11:00
Uwe Kleine-König
7cfe99872c macintosh: windfarm_pm91: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/398f9079cacd5b87a930181c250aad2ad4d31424.1704900449.git.u.kleine-koenig@pengutronix.de
2024-02-16 12:35:15 +11:00
Uwe Kleine-König
fb0217d79d macintosh: windfarm_pm81: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/725a17c7fb1bbe6d827b38bbee40494aebf9c06d.1704900449.git.u.kleine-koenig@pengutronix.de
2024-02-16 12:35:14 +11:00
Uwe Kleine-König
057894a40e macintosh: windfarm_pm72: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0406f1db35f23f66fa8a5f8c756fa456601795c4.1704900449.git.u.kleine-koenig@pengutronix.de
2024-02-16 12:35:14 +11:00
Uwe Kleine-König
2e7e64c842 macintosh: windfarm_pm121: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/36f421f845449a9700f704379105aa5f5db5dd9e.1704900449.git.u.kleine-koenig@pengutronix.de
2024-02-16 12:35:14 +11:00
Uwe Kleine-König
839cf59b55 macintosh: windfarm_pm112: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/eac991c7f2267237382f77bc15c016ff62e1fbb7.1704900449.git.u.kleine-koenig@pengutronix.de
2024-02-16 12:35:14 +11:00
Uwe Kleine-König
bd6d99b70b macintosh: therm_windtunnel: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/74b35a7183dead9cb8359b38356e1a70e720c53e.1704900449.git.u.kleine-koenig@pengutronix.de
2024-02-16 12:35:14 +11:00
Damien Le Moal
14db5f64a9 zonefs: Improve error handling
Write error handling is racy and can sometime lead to the error recovery
path wrongly changing the inode size of a sequential zone file to an
incorrect value  which results in garbage data being readable at the end
of a file. There are 2 problems:

1) zonefs_file_dio_write() updates a zone file write pointer offset
   after issuing a direct IO with iomap_dio_rw(). This update is done
   only if the IO succeed for synchronous direct writes. However, for
   asynchronous direct writes, the update is done without waiting for
   the IO completion so that the next asynchronous IO can be
   immediately issued. However, if an asynchronous IO completes with a
   failure right before the i_truncate_mutex lock protecting the update,
   the update may change the value of the inode write pointer offset
   that was corrected by the error path (zonefs_io_error() function).

2) zonefs_io_error() is called when a read or write error occurs. This
   function executes a report zone operation using the callback function
   zonefs_io_error_cb(), which does all the error recovery handling
   based on the current zone condition, write pointer position and
   according to the mount options being used. However, depending on the
   zoned device being used, a report zone callback may be executed in a
   context that is different from the context of __zonefs_io_error(). As
   a result, zonefs_io_error_cb() may be executed without the inode
   truncate mutex lock held, which can lead to invalid error processing.

Fix both problems as follows:
- Problem 1: Perform the inode write pointer offset update before a
  direct write is issued with iomap_dio_rw(). This is safe to do as
  partial direct writes are not supported (IOMAP_DIO_PARTIAL is not
  set) and any failed IO will trigger the execution of zonefs_io_error()
  which will correct the inode write pointer offset to reflect the
  current state of the one on the device.
- Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error()
  and call this function directly from __zonefs_io_error() after
  obtaining the zone information using blkdev_report_zones() with a
  simple callback function that copies to a local stack variable the
  struct blk_zone obtained from the device. This ensures that error
  handling is performed holding the inode truncate mutex.
  This change also simplifies error handling for conventional zone files
  by bypassing the execution of report zones entirely. This is safe to
  do because the condition of conventional zones cannot be read-only or
  offline and conventional zone files are always fully mapped with a
  constant file size.

Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
2024-02-16 10:20:35 +09:00
Dave Airlie
6f167a3673 Merge tag 'drm-intel-gt-next-2024-02-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:

- Add GuC submission interface version query (Tvrtko Ursulin)

Driver Changes:

Fixes/improvements/new stuff:

- Atomically invalidate userptr on mmu-notifier (Jonathan Cavitt)
- Update handling of MMIO triggered reports (Umesh Nerlige Ramappa)
- Don't make assumptions about intel_wakeref_t type (Jani Nikula)
- Add workaround 14019877138 [xelpg] (Tejas Upadhyay)
- Allow for very slow HuC loading [huc] (John Harrison)
- Flush context destruction worker at suspend [guc] (Alan Previn)
- Close deregister-context race against CT-loss [guc] (Alan Previn)
- Avoid circular locking issue on busyness flush [guc] (John Harrison)
- Use rc6.supported flag from intel_gt for rc6_enable sysfs (Juan Escamilla)
- Reflect the true and current status of rc6_enable (Juan Escamilla)
- Wake GT before sending H2G message [mtl] (Vinay Belgaumkar)
- Restart the heartbeat timer when forcing a pulse (John Harrison)

Future platform enablement:

- Extend driver code of Xe_LPG to Xe_LPG+ [xelpg] (Harish Chegondi)
- Extend some workarounds/tuning to gfx version 12.74 [xelpg] (Matt Roper)

Miscellaneous:

- Reconcile Excess struct member kernel-doc warnings (Randy Dunlap)
- Change wa and EU_PERF_CNTL registers to MCR type [guc] (Shuicheng Lin)
- Add flex arrays to struct i915_syncmap (Erick Archer)
- Increasing the sleep time for live_rc6_manual [selftests] (Anirban Sk)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zc3iIVsiAwo+bu10@tursulin-desk
2024-02-16 11:19:15 +10:00
Jakub Kicinski
73be9a3aab Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

net/core/dev.c
  9f30831390 ("net: add rcu safety to rtnl_prop_list_size()")
  723de3ebef ("net: free altname using an RCU callback")

net/unix/garbage.c
  11498715f2 ("af_unix: Remove io_uring code for GC.")
  25236c91b5 ("af_unix: Fix task hung while purging oob_skb in GC.")

drivers/net/ethernet/renesas/ravb_main.c
  ed4adc0720 ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
  c2da940857 ("ravb: Add Rx checksum offload support for GbEth")

net/mptcp/protocol.c
  bdd70eb689 ("mptcp: drop the push_pending field")
  28e5c13805 ("mptcp: annotate lockless accesses around read-mostly fields")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-15 16:20:04 -08:00
Jens Axboe
b4ccc4dd13 io_uring/napi: enable even with a timeout of 0
1 usec is not as short as it used to be, and it makes sense to allow 0
for a busy poll timeout - this means just do one loop to check if we
have anything available. Add a separate ->napi_enabled to check if napi
has been enabled or not.

While at it, move the writing of the ctx napi values after we've copied
the old values back to userspace. This ensures that if the call fails,
we'll be in the same state as we were before, rather than some
indeterminate state.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-15 15:37:28 -07:00
Yu Kuai
9e46c70e82 md: Don't suspend the array for interrupted reshape
md_start_sync() will suspend the array if there are spares that can be
added or removed from conf, however, if reshape is still in progress,
this won't happen at all or data will be corrupted(remove_and_add_spares
won't be called from md_choose_sync_action for reshape), hence there is
no need to suspend the array if reshape is not done yet.

Meanwhile, there is a potential deadlock for raid456:

1) reshape is interrupted;

2) set one of the disk WantReplacement, and add a new disk to the array,
   however, recovery won't start until the reshape is finished;

3) then issue an IO across reshpae position, this IO will wait for
   reshape to make progress;

4) continue to reshape, then md_start_sync() found there is a spare disk
   that can be added to conf, mddev_suspend() is called;

Step 4 and step 3 is waiting for each other, deadlock triggered. Noted
this problem is found by code review, and it's not reporduced yet.

Fix this porblem by don't suspend the array for interrupted reshape,
this is safe because conf won't be changed until reshape is done.

Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-6-yukuai1@huaweicloud.com
2024-02-15 14:17:27 -08:00
Yu Kuai
ad39c08186 md: Don't register sync_thread for reshape directly
Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.

Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:

[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74

Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN

Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread.

Fixes: f67055780c ("[PATCH] md: Checkpoint and allow restart of raid5 reshape")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-5-yukuai1@huaweicloud.com
2024-02-15 14:17:22 -08:00
Yu Kuai
82ec0ae59d md: Make sure md_do_sync() will set MD_RECOVERY_DONE
stop_sync_thread() will interrupt md_do_sync(), and md_do_sync() must
set MD_RECOVERY_DONE, so that follow up md_check_recovery() will
unregister sync_thread, clear MD_RECOVERY_RUNNING and wake up
stop_sync_thread().

If MD_RECOVERY_WAIT is set or the array is read-only, md_do_sync() will
return without setting MD_RECOVERY_DONE, and after commit f52f5c71f3
("md: fix stopping sync thread"), dm-raid switch from
md_reap_sync_thread() to stop_sync_thread() to unregister sync_thread
from md_stop() and md_stop_writes(), causing the test
shell/lvconvert-raid-reshape.sh hang.

We shouldn't switch back to md_reap_sync_thread() because it's
problematic in the first place. Fix the problem by making sure
md_do_sync() will set MD_RECOVERY_DONE.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/ece2b06f-d647-6613-a534-ff4c9bec1142@redhat.com/
Fixes: d5d885fd51 ("md: introduce new personality funciton start()")
Fixes: 5fd6c1dce0 ("[PATCH] md: allow checkpoint of recovery with version-1 superblock")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-4-yukuai1@huaweicloud.com
2024-02-15 14:17:18 -08:00
Yu Kuai
55a48ad2db md: Don't ignore read-only array in md_check_recovery()
Usually if the array is not read-write, md_check_recovery() won't
register new sync_thread in the first place. And if the array is
read-write and sync_thread is registered, md_set_readonly() will
unregister sync_thread before setting the array read-only. md/raid
follow this behavior hence there is no problem.

After commit f52f5c71f3 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:

1) array is read-only. dm-raid update super block:
rs_update_sbs
 ro = mddev->ro
 mddev->ro = 0
  -> set array read-write
 md_update_sb

2) register new sync thread concurrently.

3) dm-raid set array back to read-only:
rs_update_sbs
 mddev->ro = ro

4) stop the array:
raid_dtr
 md_stop
  stop_sync_thread
    set_bit(MD_RECOVERY_INTR, &mddev->recovery);
    md_wakeup_thread_directly(mddev->sync_thread);
    wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))

5) sync thread done:
 md_do_sync
 set_bit(MD_RECOVERY_DONE, &mddev->recovery);
 md_wakeup_thread(mddev->thread);

6) daemon thread can't unregister sync thread:
 md_check_recovery
  if (!md_is_rdwr(mddev) &&
      !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
   return;
  -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang;

The root cause is that dm-raid manipulate 'mddev->ro' by itself,
however, dm-raid really should stop sync thread before setting the
array read-only. Unfortunately, I need to read more code before I
can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix
the problem the easy way for now to prevent dm-raid regression.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/9801e40-8ac7-e225-6a71-309dcf9dc9aa@redhat.com/
Fixes: ecbfb9f118 ("dm raid: add raid level takeover support")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-3-yukuai1@huaweicloud.com
2024-02-15 14:17:13 -08:00
Yu Kuai
1baae052cc md: Don't ignore suspended array in md_check_recovery()
mddev_suspend() never stop sync_thread, hence it doesn't make sense to
ignore suspended array in md_check_recovery(), which might cause
sync_thread can't be unregistered.

After commit f52f5c71f3 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:

1) suspend the array:
raid_postsuspend
 mddev_suspend

2) stop the array:
raid_dtr
 md_stop
  __md_stop_writes
   stop_sync_thread
    set_bit(MD_RECOVERY_INTR, &mddev->recovery);
    md_wakeup_thread_directly(mddev->sync_thread);
    wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))

3) sync thread done:
md_do_sync
 set_bit(MD_RECOVERY_DONE, &mddev->recovery);
 md_wakeup_thread(mddev->thread);

4) daemon thread can't unregister sync thread:
md_check_recovery
 if (mddev->suspended)
   return; -> return directly
 md_read_sync_thread
 clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
 -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang;

This problem is not just related to dm-raid, fix it by ignoring
suspended array in md_check_recovery(). And follow up patches will
improve dm-raid better to frozen sync thread during suspend.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/8fb335e-6d2c-dbb5-d7-ded8db5145a@redhat.com/
Fixes: 68866e425b ("MD: no sync IO while suspended")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-2-yukuai1@huaweicloud.com
2024-02-15 14:17:09 -08:00
Leo Yan
81901fc064 perf build: Cleanup perf register configuration
The target is to allow the tool to always enable the perf register
feature for native parsing and cross parsing, and current code doesn't
depend on the macro 'HAVE_PERF_REGS_SUPPORT'.

This patch remove the variable 'NO_PERF_REGS' and the defined macro
'HAVE_PERF_REGS_SUPPORT' from the Makefile.

Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-5-leo.yan@linux.dev
2024-02-15 13:48:55 -08:00
Leo Yan
9a4e47ef98 perf parse-regs: Introduce a weak function arch__sample_reg_masks()
Every architecture can provide a register list for sampling. If an
architecture doesn't support register sampling, it won't define the data
structure 'sample_reg_masks'. Consequently, any code using this
structure must be protected by the macro 'HAVE_PERF_REGS_SUPPORT'.

This patch defines a weak function, arch__sample_reg_masks(), which will
be replaced by an architecture-defined function for returning the
architecture's register list. With this refactoring, the function always
exists, the condition checking for 'HAVE_PERF_REGS_SUPPORT' is not
needed anymore, so remove it.

Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-4-leo.yan@linux.dev
2024-02-15 13:48:36 -08:00
Leo Yan
ec87c99de4 perf parse-regs: Always build perf register functions
Currently, the macro HAVE_PERF_REGS_SUPPORT is used as a switch to turn
on or turn off the code of perf registers. If any architecture cannot
support perf register, it disables the perf register parsing, for both
the native parsing and cross parsing for other architectures.

To support both the native parsing and cross parsing, the tool should
always build the perf regs functions. Thus, this patch removes
HAVE_PERF_REGS_SUPPORT from the perf regs files.

Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-3-leo.yan@linux.dev
2024-02-15 13:48:20 -08:00
Leo Yan
fca6af7be2 perf build: Remove unused CONFIG_PERF_REGS
CONFIG_PERF_REGS is not used, remove it.

Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-2-leo.yan@linux.dev
2024-02-15 13:47:36 -08:00
Yonghong Song
682158ab53 bpf: Fix test verif_scale_strobemeta_subprogs failure due to llvm19
With latest llvm19, I hit the following selftest failures with

  $ ./test_progs -j
  libbpf: prog 'on_event': BPF program load failed: Permission denied
  libbpf: prog 'on_event': -- BEGIN PROG LOAD LOG --
  combined stack size of 4 calls is 544. Too large
  verification time 1344153 usec
  stack depth 24+440+0+32
  processed 51008 insns (limit 1000000) max_states_per_insn 19 total_states 1467 peak_states 303 mark_read 146
  -- END PROG LOAD LOG --
  libbpf: prog 'on_event': failed to load: -13
  libbpf: failed to load object 'strobemeta_subprogs.bpf.o'
  scale_test:FAIL:expect_success unexpected error: -13 (errno 13)
  #498     verif_scale_strobemeta_subprogs:FAIL

The verifier complains too big of the combined stack size (544 bytes) which
exceeds the maximum stack limit 512. This is a regression from llvm19 ([1]).

In the above error log, the original stack depth is 24+440+0+32.
To satisfy interpreter's need, in verifier the stack depth is adjusted to
32+448+32+32=544 which exceeds 512, hence the error. The same adjusted
stack size is also used for jit case.

But the jitted codes could use smaller stack size.

  $ egrep -r stack_depth | grep round_up
  arm64/net/bpf_jit_comp.c:       ctx->stack_size = round_up(prog->aux->stack_depth, 16);
  loongarch/net/bpf_jit.c:        bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16);
  powerpc/net/bpf_jit_comp.c:     cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
  riscv/net/bpf_jit_comp32.c:             round_up(ctx->prog->aux->stack_depth, STACK_ALIGN);
  riscv/net/bpf_jit_comp64.c:     bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16);
  s390/net/bpf_jit_comp.c:        u32 stack_depth = round_up(fp->aux->stack_depth, 8);
  sparc/net/bpf_jit_comp_64.c:            stack_needed += round_up(stack_depth, 16);
  x86/net/bpf_jit_comp.c:         EMIT3_off32(0x48, 0x81, 0xEC, round_up(stack_depth, 8));
  x86/net/bpf_jit_comp.c: int tcc_off = -4 - round_up(stack_depth, 8);
  x86/net/bpf_jit_comp.c:                     round_up(stack_depth, 8));
  x86/net/bpf_jit_comp.c: int tcc_off = -4 - round_up(stack_depth, 8);
  x86/net/bpf_jit_comp.c:         EMIT3_off32(0x48, 0x81, 0xC4, round_up(stack_depth, 8));

In the above, STACK_ALIGN in riscv/net/bpf_jit_comp32.c is defined as 16.
So stack is aligned in either 8 or 16, x86/s390 having 8-byte stack alignment and
the rest having 16-byte alignment.

This patch calculates total stack depth based on 16-byte alignment if jit is requested.
For the above failing case, the new stack size will be 32+448+0+32=512 and no verification
failure. llvm19 regression will be discussed separately in llvm upstream.

The verifier change caused three test failures as these tests compared messages
with stack size. More specifically,
  - test_global_funcs/global_func1: fail with interpreter mode and success with jit mode.
    Adjusted stack sizes so both jit and interpreter modes will fail.
  - async_stack_depth/{pseudo_call_check, async_call_root_check}: since jit and interpreter
    will calculate different stack sizes, the failure msg is adjusted to omit those
    specific stack size numbers.

  [1] https://lore.kernel.org/bpf/32bde0f0-1881-46c9-931a-673be566c61d@linux.dev/

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240214232951.4113094-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-15 13:45:27 -08:00
Thomas Gleixner
fd43b8ae76 x86/cpu/topology: Provide __num_[cores|threads]_per_package
Expose properly accounted information and accessors so the fiddling with
other topology variables can be replaced.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.120958987@linutronix.de
2024-02-15 22:07:45 +01:00
Thomas Gleixner
bd745d1c41 x86/cpu/topology: Rename topology_max_die_per_package()
The plural of die is dies.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.065874205@linutronix.de
2024-02-15 22:07:45 +01:00
Thomas Gleixner
8078f4d610 x86/cpu/topology: Rename smp_num_siblings
It's really a non-intuitive name. Rename it to __max_threads_per_core which
is obvious.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.011307973@linutronix.de
2024-02-15 22:07:45 +01:00
Thomas Gleixner
3205c9833d x86/cpu/topology: Retrieve cores per package from topology bitmaps
Similar to other sizing information the number of cores per package can be
established from the topology bitmap.

Provide a function for retrieving that information and replace the buggy
hack in the CPUID evaluation with it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.956858282@linutronix.de
2024-02-15 22:07:45 +01:00
Thomas Gleixner
380414be78 x86/cpu/topology: Use topology logical mapping mechanism
Replace the logical package and die management functionality and retrieve
the logical IDs from the topology bitmaps.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.901865302@linutronix.de
2024-02-15 22:07:44 +01:00
Thomas Gleixner
b7065f4f84 x86/cpu/topology: Provide logical pkg/die mapping
With the topology bitmaps in place the logical package and die IDs can
trivially be retrieved by determining the bitmap weight of the relevant
topology domain level up to and including the physical ID in question.

Provide a function to that effect.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.846136196@linutronix.de
2024-02-15 22:07:44 +01:00
Thomas Gleixner
5e40fb2d4a x86/cpu/topology: Simplify cpu_mark_primary_thread()
No point in creating a mask via fls(). smp_num_siblings is guaranteed to be
a power of 2. So just using (smp_num_siblings - 1) has the same effect.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.791176581@linutronix.de
2024-02-15 22:07:44 +01:00
Thomas Gleixner
882e0cff9e x86/cpu/topology: Mop up primary thread mask handling
The early initcall to initialize the primary thread mask is not longer
required because topology_init_possible_cpus() can mark primary threads
correctly when initializing the possible and present map as the number of
SMT threads is already determined correctly.

The XENPV workaround is not longer required because XENPV now registers
fake APIC IDs which will just work like any other enumeration.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.736104257@linutronix.de
2024-02-15 22:07:44 +01:00
Thomas Gleixner
090610ba70 x86/cpu/topology: Use topology bitmaps for sizing
Now that all possible APIC IDs are tracked in the topology bitmaps, its
trivial to retrieve the real information from there.

This gets rid of the guesstimates for the maximal packages and dies per
package as the actual numbers can be determined before a single AP has been
brought up.

The number of SMT threads can now be determined correctly from the bitmaps
in all situations. Up to now a system which has SMT disabled in the BIOS
will still claim that it is SMT capable, because the lowest APIC ID bit is
reserved for that and CPUID leaf 0xb/0x1f still enumerates the SMT domain
accordingly. By calculating the bitmap weights of the SMT and the CORE
domain and setting them into relation the SMT disabled in BIOS situation
reports correctly that the system is not SMT capable.

It also handles the situation correctly when a hybrid systems boot CPU does
not have SMT as it takes the SMT capability of the APs fully into account.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.681709880@linutronix.de
2024-02-15 22:07:44 +01:00
Thomas Gleixner
354da4cf57 x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
It turns out that XEN/PV Dom0 has halfways usable CPUID/MADT enumeration
except that it cannot deal with CPUs which are enumerated as disabled in
MADT.

DomU has no MADT and provides at least rudimentary topology information in
CPUID leaves 1 and 4.

For both it's important that there are not more possible Linux CPUs than
vCPUs provided by the hypervisor.

As this is ensured by counting the vCPUs before enumeration happens:

  - lift the restrictions in the CPUID evaluation and the MADT parser

  - Utilize MADT registration for Dom0

  - Keep the fake APIC ID registration for DomU

  - Fix the XEN APIC fake so the readout of the local APIC ID works for
    Dom0 via the hypercall and for DomU by returning the registered
    fake APIC IDs.

With that the XEN/PV fake approximates usefulness.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.626195405@linutronix.de
2024-02-15 22:07:44 +01:00