In the npcm_i2c_reg_slave() function, there was a redundant
comparison that checked if 'bus->slave' was null immediately after
assigning it the 'client' value. There were concerns about a
potential null dereference because of `client->adapter`, but
according to Wolfram Sang, "we trusted ourselves here" Therefore,
this comparison is unnecessary.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
According to the Intel datasheets, software must reset the block
buffer index twice for block process call transactions: once before
writing the outgoing data to the buffer, and once again before
reading the incoming data from the buffer.
The driver is currently missing the second reset, causing the wrong
portion of the block buffer to be read.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reported-by: Piotr Zakowski <piotr.zakowski@intel.com>
Closes: https://lore.kernel.org/linux-i2c/20240213120553.7b0ab120@endymion.delvare/
Fixes: 315cd67c94 ("i2c: i801: Add Block Write-Block Read Process Call support")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
On powerpc, it is possible to compile test both the new apple (arm) and
old pasemi (powerpc) drivers for the i2c hardware at the same time,
which leads to a warning about linking the same object file twice:
scripts/Makefile.build:244: drivers/i2c/busses/Makefile: i2c-pasemi-core.o is added to multiple modules: i2c-apple i2c-pasemi
Rework the driver to have an explicit helper module, letting Kbuild
take care of whether this should be built-in or a loadable driver.
Fixes: 9bc5f4f660 ("i2c: pasemi: Split pci driver to its own file")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
GNU Make manual [1] clearly forbids a tab at the beginning of the
conditional directive line:
"Extra spaces are allowed and ignored at the beginning of the
conditional directive line, but a tab is not allowed."
This will not work for the next release of GNU Make, hence commit
82175d1f94 ("kbuild: Replace tabs with spaces when followed by
conditionals") replaced the inappropriate tabs with 8 spaces.
However, the 8-space indentation cannot be visually distinguished.
Linus suggested 2-4 spaces for those nested if-statements. [2]
This commit redoes the replacement with 4 spaces.
[1]: https://www.gnu.org/software/make/manual/make.html#Conditional-Syntax
[2]: https://lore.kernel.org/all/CAHk-=whJKZNZWsa-VNDKafS_VfY4a5dAjG-r8BZgWk_a-xSepw@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A previous commit moved to using just the private task_work list for
SQPOLL, but it neglected to update the check for whether we have
pending task_work. Normally this is fine as we'll attempt to run it
unconditionally, but if we race with going to sleep AND task_work
being added, then we certainly need the right check here.
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there's no current work on the list, we still need to potentially
wake the SQPOLL task if it is sleeping. This is ordered with the
wait queue addition in sqpoll, which adds to the wait queue before
checking for pending work items.
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The flags were set to SLAB_RED_ZONE when CONFIG_DEBUG_SLAB was enabled.
With SLAB gone, this is now dead code so remove it. With SLUB, debugging
options including red zoning can be set for orangefs caches by the
slab_debug boot parameter.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
While testing io_uring NAPI with DEFER_TASKRUN, I ran into slowdowns and
stalls in packet delivery. Turns out that while
io_napi_busy_loop_should_end() aborts appropriately on regular
task_work, it does not abort if we have local task_work pending.
Move io_has_work() into the private io_uring.h header, and gate whether
we should continue polling on that as well. This makes NAPI polling on
send/receive work as designed with IORING_SETUP_DEFER_TASKRUN as well.
Fixes: 8d0c12a80c ("io-uring: add napi busy poll support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve example DTS readability by using known defines for GPIO flags.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The example DTS should be indented with two or four (preferred) spaces,
as mentioned in Writing Schema document. While re-indenting, change the
node names to somehow generic names, as expected by Devicetree
specification.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Schlatterbeck <rsc@runtux.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The mapping files are tightly related to auxdisplay subsystem.
Add them to the MAINTAINERS database.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
security_setselfattr() has an integer overflow bug that leads to
out-of-bounds access when userspace provides bogus input:
`lctx->ctx_len + sizeof(*lctx)` is checked against `lctx->len` (and,
redundantly, also against `size`), but there are no checks on
`lctx->ctx_len`.
Therefore, userspace can provide an `lsm_ctx` with `->ctx_len` set to a
value between `-sizeof(struct lsm_ctx)` and -1, and this bogus `->ctx_len`
will then be passed to an LSM module as a buffer length, causing LSM
modules to perform out-of-bounds accesses.
The following reproducer will demonstrate this under ASAN (if AppArmor is
loaded as an LSM):
```
struct lsm_ctx {
uint64_t id;
uint64_t flags;
uint64_t len;
uint64_t ctx_len;
char ctx[];
};
int main(void) {
size_t size = sizeof(struct lsm_ctx);
struct lsm_ctx *ctx = malloc(size);
ctx->id = 104/*LSM_ID_APPARMOR*/;
ctx->flags = 0;
ctx->len = size;
ctx->ctx_len = -sizeof(struct lsm_ctx);
syscall(
460/*__NR_lsm_set_self_attr*/,
/*attr=*/ 100/*LSM_ATTR_CURRENT*/,
/*ctx=*/ ctx,
/*size=*/ size,
/*flags=*/ 0
);
}
```
Fixes: a04a119808 ("LSM: syscalls for current process attributes")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, removed ref to ASAN splat that isn't included]
Signed-off-by: Paul Moore <paul@paul-moore.com>
smack_cred_transfer() open codes the same initialization
as init_task_smack(). Remove the open coding and replace it
with a call to init_task_smack().
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
When queue_work_on() is used to queue a BH work item on a remote CPU, the
work item is queued on that CPU but kick_pool() raises softirq on the local
CPU. This leads to stalls as the work item won't be executed until something
else on the remote CPU schedules a BH work item or tasklet locally.
Fix it by bouncing raising softirq to the target CPU using per-cpu irq_work.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 4cb1ef6460 ("workqueue: Implement BH workqueues to eventually replace tasklets")
Instead of magically poking at the bit0 of branch clocks' CBCR, use
the newly introduced helper.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-2-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We hardcode some clocks to be always-on, as they're essential to the
functioning of the SoC / some peripherals. Add a helper to do so
to make the writes less magic.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-1-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In some situations, if you fail to zero-initialize the
bpf_{prog,map,btf,link}_info structs supplied to the set of LIBBPF
helpers bpf_{prog,map,btf,link}_get_info_by_fd(), you can expect the
helper to return an error. This can possibly leave people in a
situation where they're scratching their heads for an unnnecessary
amount of time. Make an explicit remark about the requirement of
zero-initializing the supplied bpf_{prog,map,btf,link}_info structs
for the respective LIBBPF helpers.
Internally, LIBBPF helpers bpf_{prog,map,btf,link}_get_info_by_fd()
call into bpf_obj_get_info_by_fd() where the bpf(2)
BPF_OBJ_GET_INFO_BY_FD command is used. This specific command is
effectively backed by restrictions enforced by the
bpf_check_uarg_tail_zero() helper. This function ensures that if the
size of the supplied bpf_{prog,map,btf,link}_info structs are larger
than what the kernel can handle, trailing bits are zeroed. This can be
a problem when compiling against UAPI headers that don't necessarily
match the sizes of the same underlying types known to the kernel.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/ZcyEb8x4VbhieWsL@google.com
It has been observed that some USB/UAS devices return generic properties
hardcoded in firmware for mode pages for a period of time after a device
has been discovered. The reported properties are either garbage or they do
not accurately reflect the characteristics of the physical storage device
attached in the case of a bridge.
Prior to commit 1e029397d1 ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") we would call revalidate several
times during device discovery. As a result, incorrect values would
eventually get replaced with ones accurately describing the attached
storage. When we did away with the redundant revalidate pass, several
cases were reported where devices reported nonsensical values or would
end up in write-protected state.
An initial attempt at addressing this issue involved introducing a
delayed second revalidate invocation. However, this approach still
left some devices reporting incorrect characteristics.
Tasos Sahanidis debugged the problem further and identified that
introducing a READ operation prior to MODE SENSE fixed the problem and that
it wasn't a timing issue. Issuing a READ appears to cause the devices to
update their state to reflect the actual properties of the storage
media. Device properties like vendor, model, and storage capacity appear to
be correctly reported from the get-go. It is unclear why these devices
defer populating the remaining characteristics.
Match the behavior of a well known commercial operating system and
trigger a READ operation prior to querying device characteristics to
force the device to populate the mode pages.
The additional READ is triggered by a flag set in the USB storage and
UAS drivers. We avoid issuing the READ for other transport classes
since some storage devices identify Linux through our particular
discovery command sequence.
Link: https://lore.kernel.org/r/20240213143306.2194237-1-martin.petersen@oracle.com
Fixes: 1e029397d1 ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice")
Cc: stable@vger.kernel.org
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
PHY_CONTROL register works as defined in the IEEE 802.3 specification
(IEEE 802.3-2008 22.2.4.1). Tidy up the temporary workaround.
User impact: PHY can now be powered down when the ethernet link is down.
Testing hints: ip link set down <device> (or just disconnect the
ethernet cable).
Oldest tested NVM version is: 1045:740.
Fixes: 5586838fe9 ("igc: Add code for PHY support")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 1978d3ead8 ("intel: fix string truncation warnings")
fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf.
drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning:‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note:directive argument in the range [0, 65535]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note:directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note:‘snprintf’ output between 23 and 43 bytes into a destination of size 32
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fix this warning by using a larger space for adapter->fw_version,
and then fall back and continue to use snprintf.
Fixes: 1978d3ead8 ("intel: fix string truncation warnings")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Cc: Kunwu Chan <kunwu.chan@hotmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
-----BEGIN PGP SIGNATURE-----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=infW
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.8-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes/cleanups (and one KVM x86 cleanup) for 6.8:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if and only
if the incoming events->nmi.pending is non-zero. If the target vCPU is in
the UNITIALIZED state, the spurious request will result in KVM exiting to
userspace, which in turn causes QEMU to constantly acquire and release
QEMU's global mutex, to the point where the BSP is unable to make forward
progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl being
incorrectly truncated, and ultimately causes KVM to think a fixed counter
has already been disabled (KVM thinks the old value is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from userspace
that is ultimately ignored due to ignore_msrs=true doesn't zero the output
as intended.
-----BEGIN PGP SIGNATURE-----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=92ae
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.8-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.8:
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if and only
if the incoming events->nmi.pending is non-zero. If the target vCPU is in
the UNITIALIZED state, the spurious request will result in KVM exiting to
userspace, which in turn causes QEMU to constantly acquire and release
QEMU's global mutex, to the point where the BSP is unable to make forward
progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl being
incorrectly truncated, and ultimately causes KVM to think a fixed counter
has already been disabled (KVM thinks the old value is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from userspace
that is ultimately ignored due to ignore_msrs=true doesn't zero the output
as intended.
The bpf_doc script refers to the GPL as the "GNU Privacy License".
I strongly suspect that the author wanted to refer to the GNU General
Public License, under which the Linux kernel is released, as, to the
best of my knowledge, there is no license named "GNU Privacy License".
This patch corrects the license name in the script accordingly.
Fixes: 56a092c895 ("bpf: add script and prepare bpf.h for new helpers documentation")
Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240213230544.930018-3-glusvardi@posteo.net
DRAM row retirement depends on model-specific information that is best
done within the AMD Address Translation Library.
Export a generic wrapper function for other modules to use. Add any
model-specific helpers here.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240214033516.1344948-2-yazen.ghannam@amd.com
The context-switch-time check for RCU Tasks Trace quiescence expects
current->trc_reader_special.b.need_qs to be zero, and if so, updates
it to TRC_NEED_QS_CHECKED. This is backwards, because if this value
is zero, there is no RCU Tasks Trace grace period in flight, an thus
no need for a quiescent state. Instead, when a grace period starts,
this field is set to TRC_NEED_QS.
This commit therefore changes the check from zero to TRC_NEED_QS.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
With commit '6a010a49b6 ("cgroup: Make !percpu threadgroup_rwsem
operations optional")' usage of rcu_sync_enter_start is removed.
So this function can also be removed.
In the words of Oleg Nesterov:
__rcu_sync_enter(wait => false) is a better alternative if
someone needs rcu_sync_enter_start() again.
Link: https://lore.kernel.org/all/20220725121208.GB28662@redhat.com/
Signed-off-by: Onkarnath <onkarnath.1@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Currently, if rcu_torture_writer() sees fewer than ten grace periods
having elapsed during a call to stutter_wait() that actually waited,
the rtort_pipe_count warning is emitted. This has worked well for
a long time. Except that the rcutorture TREE07 scenario now does a
short-term 14-second RCU CPU stall, which can most definitely case
false-positive rtort_pipe_count warnings.
This commit therefore changes rcu_torture_writer() to compute the
full expected holdoff and stall duration, and to refuse to report any
rtort_pipe_count warnings until after all stalls have completed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
The comments added in commit 1ef990c4b36b ("srcu: No need to
advance/accelerate if no callback enqueued") are a bit confusing.
The comments are describing a scenario for code that was moved and is
no longer the way it was (snapshot after advancing). Improve the code
comments to reflect this and also document why acceleration can never
fail.
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
To allow more flexible arrangements while still provide a single kernel
for distros, provide a boot time parameter to enable/disable lazy RCU.
Specify:
rcutree.enable_rcu_lazy=[y|1|n|0]
Which also requires
rcu_nocbs=all
at boot time to enable/disable lazy RCU.
To disable it by default at build time when CONFIG_RCU_LAZY=y, the new
CONFIG_RCU_LAZY_DEFAULT_OFF can be used.
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
The variable name jiffies_till_flush is too generic and therefore:
* It may shadow a global variable
* It doesn't tell on what it operates
Make the name more precise, along with the related APIs.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit completes the list of call_rcu*() functions that are not
guaranteed to have their callbacks executing on the same CPU. While in
the area, fix an unrelated typo.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit explicitly states that you should initialize any locks to
be used by readers in your SLAB_TYPESAFE_BY_RCU constructor.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Document the "state" parameter of both of these functions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312041922.YZCcEPYD-lkp@intel.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Kernel boot parameters declared with early_param() are parsed before
embedded parameters are extracted from initrd, and early_param()
parameters are not helpful when embedded in initrd. Therefore,
mark early_param() kernel boot parameters with "EARLY" in
kernel-parameters.txt.
The following early_param() calls declare kernel boot parameters that
are undocumented:
early_param("atmel.pm_modes", at91_pm_modes_select);
early_param("mem_fclk_21285", early_fclk);
early_param("ecc", early_ecc);
early_param("cachepolicy", early_cachepolicy);
early_param("nodebugmon", early_debug_disable);
early_param("kfence.sample_interval", parse_kfence_early_init);
early_param("additional_cpus", setup_additional_cpus);
early_param("stram_pool", atari_stram_setup);
early_param("disable_octeon_edac", disable_octeon_edac);
early_param("rd_start", rd_start_early);
early_param("rd_size", rd_size_early);
early_param("coherentio", setcoherentio);
early_param("nocoherentio", setnocoherentio);
early_param("fadump", early_fadump_param);
early_param("fadump_reserve_mem", early_fadump_reserve_mem);
early_param("no_stf_barrier", handle_no_stf_barrier);
early_param("no_rfi_flush", handle_no_rfi_flush);
early_param("smt-enabled", early_smt_enabled);
early_param("ppc_pci_reset_phbs", pci_reset_phbs_setup);
early_param("ps3fb", early_parse_ps3fb);
early_param("ps3flash", early_parse_ps3flash);
early_param("novx", disable_vector_extension);
early_param("nobp", nobp_setup_early);
early_param("nospec", nospec_setup_early);
early_param("possible_cpus", _setup_possible_cpus);
early_param("stp", early_parse_stp);
early_param("nopfault", nopfault);
early_param("nmi_mode", nmi_mode_setup);
early_param("sh_mv", early_parse_mv);
early_param("pmb", early_pmb);
early_param("hvirq", early_hvirq_major);
early_param("cfi", cfi_parse_cmdline);
early_param("disableapic", setup_disableapic);
early_param("noapictimer", parse_disable_apic_timer);
early_param("disable_cpu_apicid", apic_set_disabled_cpu_apicid);
early_param("uv_memblksize", parse_mem_block_size);
early_param("retbleed", retbleed_parse_cmdline);
early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall);
early_param("update_mptable", update_mptable_setup);
early_param("alloc_mptable", parse_alloc_mptable_opt);
early_param("possible_cpus", _setup_possible_cpus);
early_param("lsmsi", early_parse_ls_scfg_msi);
early_param("nokgdbroundup", opt_nokgdbroundup);
early_param("kgdbcon", opt_kgdb_con);
early_param("kasan", early_kasan_flag);
early_param("kasan.mode", early_kasan_mode);
early_param("kasan.vmalloc", early_kasan_flag_vmalloc);
early_param("kasan.page_alloc.sample", early_kasan_flag_page_alloc_sample);
early_param("kasan.page_alloc.sample.order", early_kasan_flag_page_alloc_sample_order);
early_param("kasan.fault", early_kasan_fault);
early_param("kasan.stacktrace", early_kasan_flag_stacktrace);
early_param("kasan.stack_ring_size", early_kasan_flag_stack_ring_size);
early_param("accept_memory", accept_memory_parse);
early_param("page_table_check", early_page_table_check_param);
sh_early_platform_init("earlytimer", &sh_cmt_device_driver);
early_param_on_off("gbpages", "nogbpages", direct_gbpages, CONFIG_X86_DIRECT_GBPAGES);
These are not necessarily bugs, given that some kernel boot parameters
are intended for deep debugging rather than general use.
This work does not cover all of the kernel boot parameters declared using
cmdline_find_option() and cmdline_find_option_bool(). If these are in
fact guaranteed to be early (which appears to be the case), they can be
added in a later version of this patch.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Petr Malat <oss@malat.biz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <linux-doc@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit adds CONFIG_RCU_STRICT_GRACE_PERIOD to the list of debugging
Kconfig options in checklist.rst.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In kernels built with CONFIG_PREEMPT_RT=n, spinlock critical sections
are RCU readers because they disable preemption. However, they are also
RCU readers in CONFIG_PREEMPT_RT=y because in that case the locking
primitives contain rcu_read_lock() and rcu_read_unlock(). Therefore,
upgrade checklist.rst to document this non-obvious case.
While in the area, fix a typo by changing "read-side critical" to
"read-side critical section".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In kernels built with CONFIG_PREEMPT_RT=n, spinlock critical sections
are RCU readers because they disable preemption. However, they are also
RCU readers in CONFIG_PREEMPT_RT=y because in that case the locking
primitives contain rcu_read_lock() and rcu_read_unlock(). Therefore,
upgrade whatisRCU.rst to document this non-obvious case.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In kernels built with CONFIG_PREEMPT_RT=n, spinlock critical sections
are RCU readers because they disable preemption. However, they are also
RCU readers in CONFIG_PREEMPT_RT=y because the -rt locking primitives
contain rcu_read_lock() and rcu_read_unlock(). Therefore, upgrade
rcu_dereference.rst to document this non-obvious case.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=whGKvjHCtJ6W4pQ0_h_k9fiFQ8V2GpM=BqYnB2X=SJ+XQ@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
TREE04 running on short iterations can produce writer stalls of the
following kind:
??? Writer stall state RTWS_EXP_SYNC(4) g3968 f0x0 ->state 0x2 cpu 0
task:rcu_torture_wri state:D stack:14568 pid:83 ppid:2 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x2de/0x850
? trace_event_raw_event_rcu_exp_funnel_lock+0x6d/0xb0
schedule+0x4f/0x90
synchronize_rcu_expedited+0x430/0x670
? __pfx_autoremove_wake_function+0x10/0x10
? __pfx_synchronize_rcu_expedited+0x10/0x10
do_rtws_sync.constprop.0+0xde/0x230
rcu_torture_writer+0x4b4/0xcd0
? __pfx_rcu_torture_writer+0x10/0x10
kthread+0xc7/0xf0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Waiting for an expedited grace period and polling for an expedited
grace period both are operations that internally rely on the same
workqueue performing necessary asynchronous work.
However, a dependency chain is involved between those two operations,
as depicted below:
====== CPU 0 ======= ====== CPU 1 =======
synchronize_rcu_expedited()
exp_funnel_lock()
mutex_lock(&rcu_state.exp_mutex);
start_poll_synchronize_rcu_expedited
queue_work(rcu_gp_wq, &rnp->exp_poll_wq);
synchronize_rcu_expedited_queue_work()
queue_work(rcu_gp_wq, &rew->rew_work);
wait_event() // A, wait for &rew->rew_work completion
mutex_unlock() // B
//======> switch to kworker
sync_rcu_do_polled_gp() {
synchronize_rcu_expedited()
exp_funnel_lock()
mutex_lock(&rcu_state.exp_mutex); // C, wait B
....
} // D
Since workqueues are usually implemented on top of several kworkers
handling the queue concurrently, the above situation wouldn't deadlock
most of the time because A then doesn't depend on D. But in case of
memory stress, a single kworker may end up handling alone all the works
in a serialized way. In that case the above layout becomes a problem
because A then waits for D, closing a circular dependency:
A -> D -> C -> B -> A
This however only happens when CONFIG_RCU_EXP_KTHREAD=n. Indeed
synchronize_rcu_expedited() is otherwise implemented on top of a kthread
worker while polling still relies on rcu_gp_wq workqueue, breaking the
above circular dependency chain.
Fix this with making expedited grace period to always rely on kthread
worker. The workqueue based implementation is essentially a duplicate
anyway now that the per-node initialization is performed by per-node
kthread workers.
Meanwhile the CONFIG_RCU_EXP_KTHREAD switch is still kept around to
manage the scheduler policy of these kthread workers.
Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>