sev-dev.c calls code in the AMD IOMMU now but that can't really work if
latter is not enabled in Kconfig:
ld: vmlinux.o: in function `__sev_firmware_shutdown.isra.0':
sev-dev.c:(.text+0x2501f0e): undefined reference to `amd_iommu_snp_disable'
ld: vmlinux.o: in function `snp_rmptable_init':
sev.c:(.init.text+0x26260): undefined reference to `amd_iommu_snp_en'
make[2]: *** [scripts/Makefile.vmlinux:37: vmlinux] Error 1
make: *** [Makefile:240: __sub-make] Error 2
Fix those deps.
Fixes: f366a8dac1 ("iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240207204721.6189-1-bp@alien8.de
The ACPI-WMI specification declares in the section "ACPI Control Method
Naming Conventions and Functionality for Windows 2000 Instrumentation"
that a WMxx control method takes 3 arguments: instance, method id and
argument buffer. This is also the case even when the underlying WMI
method does not have any input arguments.
So if a WMI driver evaluates a WMI method without passing an input
buffer, ACPICA will log a warning complaining that the third argument
is missing.
Prevent this by checking that a input buffer was passed, and return
an error if this was not the case.
Tested on a Asus PRIME B650-Plus.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240212185016.5494-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
{CMB/DSB}_PATT_ENABLE_TS attributes do not use an "idx" field and never sets it.
But, since have full blown warning enabled in coresight, it triggerst the warning
on some of the newer compiler versions:
drivers/hwtracing/coresight/coresight-tpdm.c:1055:2: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers]
1055 | DSB_PATT_ENABLE_TS,
| ^
drivers/hwtracing/coresight/coresight-tpdm.h:184:3: note: expanded from macro 'DSB_PATT_ENABLE_TS'
184 | tpdm_patt_enable_ts(enable_ts, \
| ^
drivers/hwtracing/coresight/coresight-tpdm.h:156:5: note: expanded from macro 'tpdm_patt_enable_ts'
156 | } \
| ^
drivers/hwtracing/coresight/coresight-tpdm.c:1109:2: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers]
1109 | CMB_PATT_ENABLE_TS,
| ^
drivers/hwtracing/coresight/coresight-tpdm.h:208:3: note: expanded from macro 'CMB_PATT_ENABLE_TS'
208 | tpdm_patt_enable_ts(enable_ts, \
| ^
drivers/hwtracing/coresight/coresight-tpdm.h:156:5: note: expanded from macro 'tpdm_patt_enable_ts'
156 | } \
| ^
Make sure we initialise this.
Fixes: dc6ce57e2a ("coresight-tpdm: Add timestamp control register support for the CMB")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
CAN XL data frames contain an 8-bit virtual CAN network identifier (VCID).
A VCID value of zero represents an 'untagged' CAN XL frame.
To receive and send these optional VCIDs via CAN_RAW sockets a new socket
option CAN_RAW_XL_VCID_OPTS is introduced to define/access VCID content:
- tx: set the outgoing VCID value by the kernel (one fixed 8-bit value)
- tx: pass through VCID values from the user space (e.g. for traffic replay)
- rx: apply VCID receive filter (value/mask) to be passed to the user space
With the 'tx pass through' option CAN_RAW_XL_VCID_TX_PASS all valid VCID
values can be sent, e.g. to replay full qualified CAN XL traffic.
The VCID value provided for the CAN_RAW_XL_VCID_TX_SET option will
override the VCID value in the struct canxl_frame.prio defined for
CAN_RAW_XL_VCID_TX_PASS when both flags are set.
With a rx_vcid_mask of zero all possible VCID values (0x00 - 0xFF) are
passed to the user space when the CAN_RAW_XL_VCID_RX_FILTER flag is set.
Without this flag only untagged CAN XL frames (VCID = 0x00) are delivered
to the user space (default).
The 8-bit VCID is stored inside the CAN XL prio element (only in CAN XL
frames!) to not interfere with other CAN content or the CAN filters
provided by the CAN_RAW sockets and kernel infrastruture.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20240212213550.18516-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
First, quirks was unused in struct pk_device.
And I see no reason for this additional level of indirection. struct
pcmidi_snd is far enough for the driver. Unless I am missing something?
So drop struct pk_device and convert all the users to use struct
pcmidi_snd directly. No need for doubled kmalloc+kfrees now.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
struct pcmidi_snd contains two unused members: out_substream and
out_active. They were added along the driver in commit 3a370ca1dc
(HID: Prodikeys PC-MIDI HID Driver), but not used.
Drop them.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
dev_time was moved to struct mt_application in commit f146d1c4d7 (HID:
multitouch: Store per collection multitouch data), but is not used since
then. Remove it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
struct lg3ff_device is present in the driver since its addition by
commit 74f292ca8c (HID: add driver for the Logitech Flight System
G940).
But it was never used, remove it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Gary Stein <LordCnidarian@gmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
And not by CONFIG_BPF. BPF can be selected while HID_BPF does not have
to. It actually cannot be on some platforms due to Kconfig dependences.
This saves quite some bytes on those setups.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The pressure member in struct hid_data is unused. It was
added in commit 5ae6e89f74 (HID: wacom: implement the finger part of
the HID generic handling), but never used.
As this is not a struct to communicate with the HW, remove that member.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ping Cheng <ping.cheng@wacom.com>
Cc: Jason Gerecke <jason.gerecke@wacom.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The backlight members in struct apple_sc_backlight are unused. They were
added in commit 9018eacbe6 (HID: apple: Add support for keyboard
backlight on certain T2 Macs.), but never used.
As this is not a struct to communicate with the HW, remove these.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Paul Pawlowski <paul@mrarm.io>
Cc: Aun-Ali Zaidi <admin@kodeit.net>
Cc: Aditya Garg <gargaditya08@live.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
For validation purposes, it might be useful to be able to
force Bigjoiner mode, even if current dotclock/resolution
do not require that.
Lets add such to option to debugfs.
v2: - Apparently intel_dp_need_bigjoiner can't be used, when
debugfs entry is created so lets just check manually
the DISPLAY_VER.
v3: - Switch to intel_connector from drm_connector(Jani Nikula)
- Remove redundant modeset lock(Jani Nikula)
- Use kstrtobool_from_user for boolean value(Jani Nikula)
v4: - Apply the changes to proper function(Jani Nikula)
v5: - Removed unnecessary check from i915_bigjoiner_enable_show
(Ville Syrjälä)
- Added eDP connector check to intel_connector_debugfs_add
(Ville Syrjälä)
- Removed debug message in order to prevent dmesg flooding
(Ville Syrjälä)
v6: - Assume now always that m->private is intel_connector
- Fixed other similar conflicts
v7: - Move bigjoiner force option to intel_connector(Ville Syrjälä)
- Use DEFINE_SHOW_STORE_ATTRIBUTE instead of defining fops
manually.(Ville Syrjälä)
v8: - Pass intel_connector to debugfs_create_file, instead of drm_connector.
(Jani Nikula)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212125011.66174-1-uma.shankar@intel.com
Replace the indirect accesses to struct->wacom_wac from struct->wacom
to the direct access in order for better code reading.
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The xf86-input-wacom driver does not treat '0' as a valid serial
number and will drop any input report which contains an
MSC_SERIAL = 0 event. The kernel driver already takes care to
avoid sending any MSC_SERIAL event if the value of serial[0] == 0
(which is the case for devices that don't actually report a
serial number), but this is not quite sufficient.
Only the lower 32 bits of the serial get reported to userspace,
so if this portion of the serial is zero then there can still
be problems.
This commit allows the driver to report either the lower 32 bits
if they are non-zero or the upper 32 bits otherwise.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: stable@vger.kernel.org # v4.10
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The comment in front of board_ahci_pcs7 is completely wrong.
It claims that board_ahci_pcs7 is needing the quirk, but in fact,
the logic implemented in ahci_intel_pcs_quirk() is the exact opposite,
only board_ahci_pcs7 is _excluded_ from the quirk.
This way of implementing a quirk is unconventional in several ways:
First of all because it has a board ID for which the quirk should _not_ be
applied (board_ahci_pcs7), instead of the usual way where we have a board
ID for which the quirk should be applied.
The second reason is that other than only excluding board_ahci_pcs7 from
the quirk, PCI devices that make use of the generic entry in ahci_pci_tbl
(which matches on AHCI class code) are also excluded.
This can of course lead to very subtle breakage, and did indeed do so in:
commit 104ff59af7 ("ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"),
which added an explicit entry with board_ahci_low_power to ahci_pci_tbl.
This caused many users to complain that their SATA drives disappeared.
The logical assumption was of course that the issue was related to LPM,
and was therefore reverted in commit 6210038aea ("ata: ahci: Revert
"ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"").
It took a lot of time to figure out that this was all completely unrelated
to LPM, and was instead caused by an unconventional Intel quirk.
Clean up the quirk so that it behaves like other quirks, i.e. define a
board where the quirk is applied. Platforms that were using
board_ahci_pcs7 are converted to use board_ahci, this is safe since the
boards were identical, and board_ahci_pcs7 did not define any custom
port_ops.
This way, new Intel platforms can be added using the correct "board_ahci"
board, without getting any unexpected quirks applied.
This means that we currently have some modern platforms defined that are
using the Intel PCS quirk, but that is identical to the behavior that
was there before this commit.
No functional changes intended.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.
This is caused by commit f645a90e8f ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.
But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.
To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.
Fixes: f645a90e8f ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When updating the affinity of a VPE, the VMOVP command is currently skipped
if the two CPUs are part of the same VPE affinity.
But this is wrong, as the doorbell corresponding to this VPE is still
delivered on the 'old' CPU, which screws up the balancing. Furthermore,
offlining that 'old' CPU results in doorbell interrupts generated for this
VPE being discarded.
The harsh reality is that VMOVP cannot be elided when a set_affinity()
request occurs. It needs to be obeyed, and if an optimisation is to be
made, it is at the point where the affinity change request is made (such as
in KVM).
Drop the VMOVP elision altogether, and only use the vpe_table_mask
to try and stay within the same ITS affinity group if at all possible.
Fixes: dd3f050a21 (irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP)
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-4-maz@kernel.org
While refactoring the way the ITSs are probed, the handling of quirks
applicable to ACPI-based platforms was lost. As a result, systems such as
HIP07 lose their GICv4 functionnality, and some other may even fail to
boot, unless they are configured to boot with DT.
Move the enabling of quirks into its_probe_one(), making it common to all
firmware implementations.
Fixes: 9585a495ac ("irqchip/gic-v3-its: Split allocation from initialisation of its_node")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-3-maz@kernel.org
Although the GICv3 code base has gained some handling of systems failing to
handle the shareability attributes, the GICv4 side of things has been
firmly ignored.
This is unfortunate, as the new recent addition of the "dma-noncoherent" is
supposed to apply to all of the GICR tables, and not just the ones that are
common to v3 and v4.
Add some checks to handle the VPROPBASE/VPENDBASE shareability and
cacheability attributes in the same way we deal with the other GICR_BASE
registers, wrapping the flag check in a helper for improved readability.
Note that this has been found by inspection only, as I don't have access to
HW that suffers from this particular issue.
Fixes: 3a0fff0fb6 ("irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240213101206.2137483-2-maz@kernel.org
Add support for the pointing stick (Accupoint) and 2 mouse buttons.
Present on some Toshiba/dynabook Portege X30 and X40 laptops.
It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
After this commit ba24ea1291 ("net/sched: Retire ipt action")
NET_ACT_IPT is not needed anymore as the action is retired and the code
is removed.
Clean the Kconfig part as well.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240209180656.867546-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When unlinking a file the check caps could be delayed for more than
5 seconds, but in MDS side it maybe waiting for the clients to
release caps.
This will use the cap_wq work queue and a dedicated list to help
fire the check_caps() and dirty buffer flushing immediately.
Link: https://tracker.ceph.com/issues/50223
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In case there is 'Fw' dirty caps and 'CHECK_CAPS_FLUSH' is set we
will always ignore queue a writeback. Queue a writeback is very
important because it will block kclient flushing the snapcaps to
MDS and which will block MDS waiting for revoking the 'Fb' caps.
Link: https://tracker.ceph.com/issues/50223
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ida_alloc() and ida_free() should be used instead of the deprecated
ida_simple_get() and ida_simple_remove().
The upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. Adjust the code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/3b472b0e7edf6e483b8b255cf8d1cb0163532adf.1705222332.git.christophe.jaillet@wanadoo.fr
This reverts commit c46bfba133 ("connector: Fix proc_event_num_listeners
count not cleared").
It is not accurate to reset proc_event_num_listeners according to
cn_netlink_send_mult() return value -ESRCH.
In the case of stress-ng netlink-proc, -ESRCH will always be returned,
because netlink_broadcast_filtered will return -ESRCH,
which may cause stress-ng netlink-proc performance degradation.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202401112259.b23a1567-oliver.sang@intel.com
Fixes: c46bfba133 ("connector: Fix proc_event_num_listeners count not cleared")
Signed-off-by: Keqi Wang <wangkeqi_chris@163.com>
Link: https://lore.kernel.org/r/20240209091659.68723-1-wangkeqi_chris@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add empty stub of gpio_device_get_label() when GPIOLIB is not enabled.
Cc: <stable@vger.kernel.org>
Fixes: d1f7728259 ("gpiolib: provide gpio_device_get_label()")
Suggested-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add empty stub of gpio_device_get_base() when GPIOLIB is not enabled.
Cc: <stable@vger.kernel.org>
Fixes: 8c85a102fc ("gpiolib: provide gpio_device_get_base()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add empty stub of gpiod_to_gpio_device() when GPIOLIB is not enabled.
Cc: <stable@vger.kernel.org>
Fixes: 370232d096 ("gpiolib: provide gpiod_to_gpio_device()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows.
The cpu variable is a pointer to "struct bcm7038_l1_cpu" and this structure
ends in a flexible array:
struct bcm7038_l1_cpu {
void __iomem *map_base;
u32 mask_cache[];
};
The preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + count * size" in the
kzalloc() function.
This way, the code is more readable and more safer.
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240209183128.10273-1-erick.archer@gmx.com
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162 [2]
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows.
The cpu variable is a pointer to "struct bcm6345_l1_cpu" and this structure
ends in a flexible array:
struct bcm6345_l1_cpu {
[...]
u32 enable_cache[];
};
The preferred way in the kernel is to use the struct_size() helper to do
the arithmetic instead of the argument "size + count * size" in the
kzalloc() function.
This way, the code is more readable and safer.
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240209181600.9472-1-erick.archer@gmx.com
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162 [2]
During suspend all CPUs except CPU0 are hot-unpluged and all active
interrupts are migrated to CPU0.
On resume eiointc_router_init() affines all interrupts to CPU0, so the
subsequent explicit interrupt affinity restore is redundant.
Remove it.
[ tglx: Rewrote changelog ]
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240130082722.2912576-4-maobibo@loongson.cn
eiointc_irq_dispatch() iterates over the pending bit registers of the
interrupt controller and evaluates the result even if there is no interrupt
pending in a particular 64bit chunk.
Skip handling and especially the pointless write back for clearing the
non-pending bits if a chunk is empty.
[ tglx: Massaged changelog ]
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20240130082722.2912576-3-maobibo@loongson.cn
devm_ioremap() doesn't return error pointers, it returns NULL on error.
Update the check accordingly.
Fixes: 221b110d87 ("irqchip/qcom-mpm: Support passing a slice of SRAM as reg space")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/22e1f4de-edce-4791-bd2d-2b2e98529492@moroto.mountain
eiointc_domain_alloc() uses struct eiointc, which is not defined, for a
pointer. Older compilers treat that as a forward declaration and due to
assignment of a void pointer there is no warning emitted. As the variable
is then handed in as a void pointer argument to irq_domain_set_info() the
code is functional.
Use struct eiointc_priv instead.
[ tglx: Rewrote changelog ]
Fixes: dd281e1a1a ("irqchip: Add Loongson Extended I/O interrupt controller support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20240130082722.2912576-2-maobibo@loongson.cn
Functions rds_still_queued and rds_clear_recv_queue lock a given socket
in order to safely iterate over the incoming rds messages. However
calling rds_inc_put while under this lock creates a potential deadlock.
rds_inc_put may eventually call rds_message_purge, which will lock
m_rs_lock. This is the incorrect locking order since m_rs_lock is
meant to be locked before the socket. To fix this, we move the message
item to a local list or variable that wont need rs_recv_lock protection.
Then we can safely call rds_inc_put on any item stored locally after
rs_recv_lock is released.
Fixes: bdbe6fbc6a ("RDS: recv.c")
Reported-by: syzbot+f9db6ff27b9bfdcfeca0@syzkaller.appspotmail.com
Reported-by: syzbot+dcd73ff9291e6d34b3ab@syzkaller.appspotmail.com
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://lore.kernel.org/r/20240209022854.200292-1-allison.henderson@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
shutdown_pirq and startup_pirq are not taking the
irq_mapping_update_lock because they can't due to lock inversion. Both
are called with the irq_desc->lock being taking. The lock order,
however, is first irq_mapping_update_lock and then irq_desc->lock.
This opens multiple races:
- shutdown_pirq can be interrupted by a function that allocates an event
channel:
CPU0 CPU1
shutdown_pirq {
xen_evtchn_close(e)
__startup_pirq {
EVTCHNOP_bind_pirq
-> returns just freed evtchn e
set_evtchn_to_irq(e, irq)
}
xen_irq_info_cleanup() {
set_evtchn_to_irq(e, -1)
}
}
Assume here event channel e refers here to the same event channel
number.
After this race the evtchn_to_irq mapping for e is invalid (-1).
- __startup_pirq races with __unbind_from_irq in a similar way. Because
__startup_pirq doesn't take irq_mapping_update_lock it can grab the
evtchn that __unbind_from_irq is currently freeing and cleaning up. In
this case even though the event channel is allocated, its mapping can
be unset in evtchn_to_irq.
The fix is to first cleanup the mappings and then close the event
channel. In this way, when an event channel gets allocated it's
potential previous evtchn_to_irq mappings are guaranteed to be unset already.
This is also the reverse order of the allocation where first the event
channel is allocated and then the mappings are setup.
On a 5.10 kernel prior to commit 3fcdaf3d76 ("xen/events: modify internal
[un]bind interfaces"), we hit a BUG like the following during probing of NVMe
devices. The issue is that during nvme_setup_io_queues, pci_free_irq
is called for every device which results in a call to shutdown_pirq.
With many nvme devices it's therefore likely to hit this race during
boot because there will be multiple calls to shutdown_pirq and
startup_pirq are running potentially in parallel.
------------[ cut here ]------------
blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
kernel BUG at drivers/xen/events/events_base.c:499!
invalid opcode: 0000 [#1] SMP PTI
CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1
Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006
Workqueue: nvme-reset-wq nvme_reset_work
RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0
Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00
RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff
RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? show_trace_log_lvl+0x1c1/0x2d9
? show_trace_log_lvl+0x1c1/0x2d9
? set_affinity_irq+0xdc/0x1c0
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0x90/0x110
? bind_evtchn_to_cpu+0xdf/0xf0
? do_error_trap+0x65/0x80
? bind_evtchn_to_cpu+0xdf/0xf0
? exc_invalid_op+0x4e/0x70
? bind_evtchn_to_cpu+0xdf/0xf0
? asm_exc_invalid_op+0x12/0x20
? bind_evtchn_to_cpu+0xdf/0xf0
? bind_evtchn_to_cpu+0xc5/0xf0
set_affinity_irq+0xdc/0x1c0
irq_do_set_affinity+0x1d7/0x1f0
irq_setup_affinity+0xd6/0x1a0
irq_startup+0x8a/0xf0
__setup_irq+0x639/0x6d0
? nvme_suspend+0x150/0x150
request_threaded_irq+0x10c/0x180
? nvme_suspend+0x150/0x150
pci_request_irq+0xa8/0xf0
? __blk_mq_free_request+0x74/0xa0
queue_request_irq+0x6f/0x80
nvme_create_queue+0x1af/0x200
nvme_create_io_queues+0xbd/0xf0
nvme_setup_io_queues+0x246/0x320
? nvme_irq_check+0x30/0x30
nvme_reset_work+0x1c8/0x400
process_one_work+0x1b0/0x350
worker_thread+0x49/0x310
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Modules linked in:
---[ end trace a11715de1eee1873 ]---
Fixes: d46a78b05c ("xen: implement pirq type event channels")
Cc: stable@vger.kernel.org
Co-debugged-by: Andrew Panyakin <apanyaki@amazon.com>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240124163130.31324-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit 8a7cb245cf ("net: stmmac: Do not enable RX FIFO overflow
interrupts") disabled the RX FIFO overflow interrupts. However, it left the
status variable around, but never checks it.
As stmmac_host_mtl_irq_status() returns only 0 now, the code can be
simplified.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240208-stmmac_irq-v1-1-8bab236026d4@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It should say USB4 now since we reset by default all USB4 host routers.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
If the host router is reset, there is no point running discovery as the
links are down. Furthermore this prevents CL-state enabling. For this
reason skip discovery in USB4 v2 host the same way we do with USB4 v1.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is no need to reset the USB4 host routers on resume because they
are reset already and this may cause problems if the link does not come
up soon enough. For this reason limit this to happen in non-USB4 host
routers only (that's Apple systems with Intel Thunderbolt controllers).
Fixes: 59a54c5f3d ("thunderbolt: Reset topology created by the boot firmware")
Cc: Sanath S <Sanath.S@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The driver for stm32mp257 is missing the suspend callback in
struct dev_pm_ops.
Add the callback, using the common stm32_pinctrl_suspend()
function.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes: 619f8ca4a7 ("pinctrl: stm32: add stm32mp257 pinctrl support")
Link: https://lore.kernel.org/r/20240207104604.174843-1-antonio.borneo@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The DTS code coding style expects exactly one space before '{'
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240208105252.128940-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
- Add pin groups for SCIF_CLK2 on R-Car V4H,
- Add support for port pins P19 to P28 on RZ/Five,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZcZV0wAKCRCKwlD9ZEnx
cAQ6AP9RPb5CW91132jjfoF/+dzAyEZj2YR8ndjrzN2QzOn4tQEAlfEOlavoTikB
oXQsRHGaeV8HQr02OEZgNJWYDXQMrAY=
=cnIJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.9
- Add pin groups for SCIF_CLK2 on R-Car V4H,
- Add support for port pins P19 to P28 on RZ/Five,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The capacitance value is required for the usage of the cpufreq cooling
device and power_allocator thermal governor in the appropriate energy
model.
It helps to compute the power estimated by the SoC at the appropriate
frequency. If it is the frequency of an existing OPP, or at the
frequency of the first OPP above the requested value otherwise.
The power is estimated as P = C * V^2 * f, with C being the SoC's
capacitance and V and f respectively representing the voltage and
frequency of the OPP.
Since AXG SoC doesn't have SCMI protocol support, we need to initialize
capacitance using the 'dynamic-power-coefficient' DT entry. Its value is
retrieved from the vendor kernel, and it gives us the following
freq2power mapping:
+-----------+--------+
| frequency,| power, |
| MHz | uW |
+-----------+--------+
| 100 | 10354 |
+-----------+--------+
| 250 | 27104 |
+-----------+--------+
| 500 | 55447 |
+-----------+--------+
| 667 | 77327 |
+-----------+--------+
| 1000 | 129024 |
+-----------+--------+
| 1200 | 164656 |
+-----------+--------+
| 1296 | 192489 |
+-----------+--------+
| 1416 | 239870 |
+-----------+--------+
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240209212816.11187-3-ddrokosov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The CPU cooling-cells property should be located in the meson-axg common
dtsi, as it is required for all AXG-based boards with DVFS.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Viacheslav Bocharov <adeep@lexina.in>
Link: https://lore.kernel.org/r/20240209212816.11187-2-ddrokosov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
To ensure proper functionality of USB, it is necessary to use
the rate of 64000000 for CLKID_USB_BUS. For instance, adb may
not function correctly without this setting. This information
has been derived from the vendor SDK.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240124130623.3471236-1-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>