Commit graph

1,264,895 commits

Author SHA1 Message Date
Mun Chun Yep
9567d3dc76 crypto: qat - improve aer error reset handling
Rework the AER reset and recovery flow to take into account root port
integrated devices that gets reset between the error detected and the
slot reset callbacks.

In adf_error_detected() the devices is gracefully shut down. The worker
threads are disabled, the error conditions are notified to listeners and
through PFVF comms and finally the device is reset as part of
adf_dev_down().

In adf_slot_reset(), the device is brought up again. If SRIOV VFs were
enabled before reset, these are re-enabled and VFs are notified of
restarting through PFVF comms.

Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Furong Zhou
750fa7c20e crypto: qat - limit heartbeat notifications
When the driver detects an heartbeat failure, it starts the recovery
flow. Set a limit so that the number of events is limited in case the
heartbeat status is read too frequently.

Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Damian Muszynski
f5419a4239 crypto: qat - add auto reset on error
Expose the `auto_reset` sysfs attribute to configure the driver to reset
the device when a fatal error is detected.

When auto reset is enabled, the driver resets the device when it detects
either an heartbeat failure or a fatal error through an interrupt.

This patch is based on earlier work done by Shashank Gupta.

Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Mun Chun Yep
2aaa1995a9 crypto: qat - add fatal error notification
Notify a fatal error condition and optionally reset the device in
the following cases:
  * if the device reports an uncorrectable fatal error through an
    interrupt
  * if the heartbeat feature detects that the device is not
    responding

This patch is based on earlier work done by Shashank Gupta.

Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Mun Chun Yep
4469f9b234 crypto: qat - re-enable sriov after pf reset
When a Physical Function (PF) is reset, SR-IOV gets disabled, making the
associated Virtual Functions (VFs) unavailable. Even after reset and
using pci_restore_state, VFs remain uncreated because the numvfs still
at 0. Therefore, it's necessary to reconfigure SR-IOV to re-enable VFs.

This commit introduces the ADF_SRIOV_ENABLED configuration flag to cache
the SR-IOV enablement state. SR-IOV is only re-enabled if it was
previously configured.

This commit also introduces a dedicated workqueue without
`WQ_MEM_RECLAIM` flag for enabling SR-IOV during Heartbeat and CPM error
resets, preventing workqueue flushing warning.

This patch is based on earlier work done by Shashank Gupta.

Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Mun Chun Yep
ec26f8e6c7 crypto: qat - update PFVF protocol for recovery
Update the PFVF logic to handle restart and recovery. This adds the
following functions:

  * adf_pf2vf_notify_fatal_error(): allows the PF to notify VFs that the
    device detected a fatal error and requires a reset. This sends to
    VF the event `ADF_PF2VF_MSGTYPE_FATAL_ERROR`.
  * adf_pf2vf_wait_for_restarting_complete(): allows the PF to wait for
    `ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE` events from active VFs
    before proceeding with a reset.
  * adf_pf2vf_notify_restarted(): enables the PF to notify VFs with
    an `ADF_PF2VF_MSGTYPE_RESTARTED` event after recovery, indicating that
    the device is back to normal. This prompts VF drivers switch back to
    use the accelerator for workload processing.

These changes improve the communication and synchronization between PF
and VF drivers during system restart and recovery processes.

Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Furong Zhou
758a0087db crypto: qat - disable arbitration before reset
Disable arbitration to avoid new requests to be processed before
resetting a device.

This is needed so that new requests are not fetched when an error is
detected.

Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Furong Zhou
ae508d7afb crypto: qat - add fatal error notify method
Add error notify method to report a fatal error event to all the
subsystems registered. In addition expose an API,
adf_notify_fatal_error(), that allows to trigger a fatal error
notification asynchronously in the context of a workqueue.

This will be invoked when a fatal error is detected by the ISR or
through Heartbeat.

Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Damian Muszynski
e2b67859ab crypto: qat - add heartbeat error simulator
Add a mechanism that allows to inject a heartbeat error for testing
purposes.
A new attribute `inject_error` is added to debugfs for each QAT device.
Upon a write on this attribute, the driver will inject an error on the
device which can then be detected by the heartbeat feature.
Errors are breaking the device functionality thus they require a
device reset in order to be recovered.

This functionality is not compiled by default, to enable it
CRYPTO_DEV_QAT_ERROR_INJECTION must be set.

Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Li RongQing
633eeefab6 crypto: virtio - remove duplicate check if queue is broken
virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
Quanyang Wang
a853450bf4 crypto: xilinx - call finalize with bh disabled
When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard #323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d481 ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:57:18 +08:00
zhenwei pi
c0ec2a712d crypto: virtio/akcipher - Fix stack overflow on memcpy
sizeof(struct virtio_crypto_akcipher_session_para) is less than
sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from
stack variable leads stack overflow. Clang reports this issue by
commands:
make -j CC=clang-14 mrproper >/dev/null 2>&1
make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1
make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/
  virtio_crypto_akcipher_algs.o

Fixes: 59ca6c9338 ("virtio-crypto: implement RSA algorithm")
Link: https://lore.kernel.org/all/0a194a79-e3a3-45e7-be98-83abd3e1cb7e@roeck-us.net/
Cc: <stable@vger.kernel.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-09 12:55:53 +08:00
Eric Dumazet
e7689879d1 ethtool: do not use rtnl in ethnl_default_dumpit()
for_each_netdev_dump() can be used with RCU protection,
no need for rtnl if we are going to use dev_hold()/dev_put().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240207153514.3640952-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:08:51 -08:00
Jakub Kicinski
fd0bb2c7cc Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-02-06 (ixgbe)

This series contains updates to ixgbe driver only.

Jedrzej continues cleanup work from conversion away from ixgbe_status;
s32 values are changed to int, various style issues are addressed, and
some return statements refactored to address some smatch warnings.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ixgbe: Clarify the values of the returning status
  ixgbe: Rearrange args to fix reverse Christmas tree
  ixgbe: Convert ret val type from s32 to int
====================

Link: https://lore.kernel.org/r/20240206214054.1002919-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:08:40 -08:00
Jakub Kicinski
458aabfd3b Merge branch 'add-hw-checksum-offload-support-for-rz-g2l-gbethernet-ip'
Biju Das says:

====================
Add HW checksum offload support for RZ/G2L GbEthernet IP

This patch series aims to add HW checksum offload supported by TOE module
found on the RZ/G2L Gb ethernet IP.

TOE has hardware support for calculating IP header and TCP/UDP/ICMP
checksum for both IPv4 and IPv6.

For Rx, the 4-byte result of checksum calculation is attached to the
Ethernet frames.First 2-bytes is result of IPv4 header checksum and next
2-bytes is TCP/UDP/ICMP checksum.

If a frame does not have checksum error, 0x0000 is attached as checksum
calculation result. For unsupported frames 0xFFFF is attached as checksum
calculation result. In case of an IPv6 packet, IPv4 checksum is always set
to 0xFFFF.

For Tx, the result of checksum calculation is set to the checksum field of
each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported
frames, those fields are not changed. If a transmission frame is an UDPv4
frame and its checksum value in the UDP header field is 0x0000, TOE does
not calculate checksum for UDP part of this frame as it is optional
function as per standards.

Add Tx/Rx checksum offload supported by TOE for IPv4 and TCP/UDP protocols.

Results of iperf3 in Mbps

RZ/V2L:
TCP(Tx/Rx) results with checksum offload Enabled:	{921,932}
TCP(Tx/Rx) results with checksum offload Disabled:	{867,612}

UDP(Tx/Rx) results with checksum offload Enabled:	{950,946}
UDP(Tx/Rx) results with checksum offload Disabled:	{952,920}

RZ/G2L:
TCP(Tx/Rx) results with checksum offload Enabled:	{920,936}
TCP(Tx/Rx) results with checksum offload Disabled:	{871,626}

UDP(Tx/Rx) results with checksum offload Enabled:	{953,950}
UDP(Tx/Rx) results with checksum offload Disabled:	{954,920}

RZ/G2LC:
TCP(Tx/Rx) results with checksum offload Enabled:	{927,936}
TCP(Tx/Rx) results with checksum offload Disabled:	{889,626}

UDP(Tx/Rx) results with checksum offload Enabled:	{950,946}
UDP(Tx/Rx) results with checksum offload Disabled:	{949,944}
====================

Link: https://lore.kernel.org/r/20240207092838.160627-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:06:40 -08:00
Biju Das
6c8e2803ef ravb: Add Tx checksum offload support for GbEth
TOE has hardware support for calculating IP header and TCP/UDP/ICMP
checksum for both IPv4 and IPv6.

Add Tx checksum offload supported by TOE for IPv4 and TCP/UDP.

For Tx, the result of checksum calculation is set to the checksum field of
each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported
frames, those fields are not changed. If a transmission frame is an UDPv4
frame and its checksum value in the UDP header field is 0x0000, TOE does
not calculate checksum for UDP part of this frame as it is optional
function as per standards.

We can test this functionality by the below commands

ethtool -K eth0 tx on --> to turn on Tx checksum offload
ethtool -K eth0 tx off --> to turn off Tx checksum offload

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240207092838.160627-3-biju.das.jz@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:06:37 -08:00
Biju Das
c2da940857 ravb: Add Rx checksum offload support for GbEth
TOE has hardware support for calculating IP header and TCP/UDP/ICMP
checksum for both IPv4 and IPv6.

Add Rx checksum offload supported by TOE for IPv4 and TCP/UDP protocols.

For Rx, the 4-byte result of checksum calculation is attached to the
Ethernet frames.First 2-bytes is result of IPv4 header checksum and next
2-bytes is TCP/UDP/ICMP checksum.

If a frame does not have checksum error, 0x0000 is attached as checksum
calculation result. For unsupported frames 0xFFFF is attached as checksum
calculation result. In case of an IPv6 packet, IPv4 checksum is always set
to 0xFFFF.

We can test this functionality by the below commands

ethtool -K eth0 rx on --> to turn on Rx checksum offload
ethtool -K eth0 rx off --> to turn off Rx checksum offload

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240207092838.160627-2-biju.das.jz@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:06:37 -08:00
Colin Ian King
a6c15d7ff2 netxen_nic: remove redundant assignment to variable capability
The variable capability is being assigned a value that is never
read and is being re-assigned later. The assignment is redundant and
can be removed. Also remove empty line before assignment to capability.

Cleans up clang scan build warning:
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c:1189:2: warning:
Value stored to 'capability' is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206115049.1879389-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:06:27 -08:00
Eric Dumazet
0e0939c0ad net-procfs: use xarray iterator to implement /proc/net/dev
In commit 759ab1edb5 ("net: store netdevs in an xarray")
Jakub added net->dev_by_index to map ifindex to netdevices.

We can get rid of the old hash table (net->dev_index_head),
one patch at a time, if performance is acceptable.

This patch removes unpleasant code to something more readable.

As a bonus, /proc/net/dev gets netdevices sorted by their ifindex.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240207165318.3814525-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:06:09 -08:00
Heiner Kallweit
6fb5dfee27 bnxt: convert EEE handling to use linkmode bitmaps
Convert EEE handling to use linkmode bitmaps. This prepares for removing
the legacy bitmaps from struct ethtool_keee. No functional change
intended. When replacing _bnxt_fw_to_ethtool_adv_spds() with
_bnxt_fw_to_linkmode(), remove the fw_pause argument because it's
always passed as 0.

Note:
There's a discussion on whether the underlying implementation is correct,
but it's independent of this mechanical conversion w/o functional change.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/9123bf18-a0d0-404e-a7c4-d6c466b4c5e8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:06:01 -08:00
Colin Ian King
5c80e62a2a qed: remove duplicated assignment to variable opaque_fid
Variable opaque_fid is being assigned twice with the same value
in two identical statements. Remove the redundant first assignment.

Cleans up clang scan build warning:
drivers/net/ethernet/qlogic/qed/qed_rdma.c:1796:2: warning: Value
stored to 'opaque_fid' is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240205215530.1851115-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:05:01 -08:00
Colin Ian King
e084a1c1df xirc2ps_cs: remove redundant assignment to variable okay, clean up freespace
The variable okay is being initialized with a value that is never
read, it is being re-assigned later on. The initialization is
redundant and can be removed.  Also clean up assignment to
variable freespace using an assignment and mask operation.

Cleans up clang scan build warning:
drivers/net/ethernet/xircom/xirc2ps_cs.c:1244:5: warning: Value stored
to 'okay' is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240205213643.1850420-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:04:28 -08:00
Vladimir Oltean
36f75f74dc net: dsa: tag_sja1105: remove "inline" keyword
The convention is to not use the "inline" keyword for functions in C
files, but to let the compiler choose.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206112927.4134375-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:03:57 -08:00
Vladimir Oltean
83acbb9d07 net: dsa: remove "inline" from dsa_user_netpoll_send_skb()
The convention is to not use "inline" functions in C files, and let the
compiler decide whether to inline or not.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206112927.4134375-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:03:57 -08:00
Vladimir Oltean
a2e520643b net: dsa: b53: unexport and move b53_eee_enable_set()
After commit f86ad77faf ("net: dsa: bcm_sf2: Utilize b53_{enable,
disable}_port"), bcm_sf2.c no longer calls b53_eee_enable_set(), and all
its callers are in b53_common.c.

We also need to move it, because it is called within b53_common.c before
its definition, and we want to avoid forward declarations.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240206112527.4132299-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:03:46 -08:00
Sagi Maimon
ef61f5528f ptp: ocp: add Adva timecard support
Adding support for the Adva timecard.
The card uses different drivers to provide access to the
firmware SPI flash (Altera based).
Other parts of the code are the same and could be reused.

Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20240205153046.3642-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:03:35 -08:00
Paolo Abeni
02d9009f4e selftests: net: add more missing kernel config
The reuseport_addr_any.sh is currently skipping DCCP tests and
pmtu.sh is skipping all the FOU/GUE related cases: add the missing
options.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/38d3ca7f909736c1aef56e6244d67c82a9bba6ff.1707326987.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:02:51 -08:00
Parav Pandit
4ab18af47a devlink: Fix command annotation documentation
Command example string is not read as command.
Fix command annotation.

Fixes: a8ce7b26a5 ("devlink: Expose port function commands to control migratable")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206161717.466653-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 18:41:40 -08:00
Kees Cook
4bea747f3f net/sun3_82586: Avoid reading past buffer in debug output
Since NUM_XMIT_BUFFS is always 1, building m68k with sun3_defconfig and
-Warraybounds, this build warning is visible[1]:

drivers/net/ethernet/i825xx/sun3_82586.c: In function 'sun3_82586_timeout':
drivers/net/ethernet/i825xx/sun3_82586.c:990:122: warning: array subscript 1 is above array bounds of 'volatile struct transmit_cmd_struct *[1]' [-Warray-bounds=]
  990 |                 printk("%s: command-stats: %04x %04x\n",dev->name,swab16(p->xmit_cmds[0]->cmd_status),swab16(p->xmit_cmds[1]->cmd_status));
      |                                                                                                               ~~~~~~~~~~~~^~~
...
drivers/net/ethernet/i825xx/sun3_82586.c:156:46: note: while referencing 'xmit_cmds'
  156 |         volatile struct transmit_cmd_struct *xmit_cmds[NUM_XMIT_BUFFS];

Avoid accessing index 1 since it doesn't exist.

Link: https://github.com/KSPP/linux/issues/325 [1]
Cc: Sam Creasey <sammy@sammy.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240206161651.work.876-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 18:41:10 -08:00
Magnus Karlsson
9b0ed890ac bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY
Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the
bonding driver does not support XDP and AF_XDP in zero-copy mode even
if the real NIC drivers do.

Note that the driver used to report everything as supported before a
device was bonded. Instead of just masking out the zero-copy support
from this, have the driver report that no XDP feature is supported
until a real device is bonded. This seems to be more truthful as it is
the real drivers that decide what XDP features are supported.

Fixes: cb9e6e584d ("bonding: add xdp_features support")
Reported-by: Prashant Batra <prbatra.mail@gmail.com>
Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240207084737.20890-1-magnus.karlsson@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 18:39:59 -08:00
Chuck Lever
4e1d71cabb net/handshake: Fix handshake_req_destroy_test1
Recently, handshake_req_destroy_test1 started failing:

Expected handshake_req_destroy_test == req, but
    handshake_req_destroy_test == 0000000000000000
    req == 0000000060f99b40
not ok 11 req_destroy works

This is because "sock_release(sock)" was replaced with "fput(filp)"
to address a memory leak. Note that sock_release() is synchronous
but fput() usually delays the final close and clean-up.

The delay is not consequential in the other cases that were changed
but handshake_req_destroy_test1 is testing that handshake_req_cancel()
followed by closing the file actually does call the ->hp_destroy
method. Thus the PTR_EQ test at the end has to be sure that the
final close is complete before it checks the pointer.

We cannot use a completion here because if ->hp_destroy is never
called (ie, there is an API bug) then the test will hang.

Reported by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/ZcKDd1to4MPANCrn@tissot.1015granger.net/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40
Fixes: 4a0f07d71b ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 18:32:29 -08:00
Jiri Pirko
aa1eec2f54 net/mlx5: DPLL, Fix possible use after free after delayed work timer triggers
I managed to hit following use after free warning recently:

[ 2169.711665] ==================================================================
[ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0
[ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0

[ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2
[ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2169.722457] Call Trace:
[ 2169.722756]  <IRQ>
[ 2169.723024]  dump_stack_lvl+0x58/0xb0
[ 2169.723417]  print_report+0xc5/0x630
[ 2169.723807]  ? __virt_addr_valid+0x126/0x2b0
[ 2169.724268]  kasan_report+0xbe/0xf0
[ 2169.724667]  ? __run_timers.part.0+0x179/0x4c0
[ 2169.725116]  ? __run_timers.part.0+0x179/0x4c0
[ 2169.725570]  __run_timers.part.0+0x179/0x4c0
[ 2169.726003]  ? call_timer_fn+0x320/0x320
[ 2169.726404]  ? lock_downgrade+0x3a0/0x3a0
[ 2169.726820]  ? kvm_clock_get_cycles+0x14/0x20
[ 2169.727257]  ? ktime_get+0x92/0x150
[ 2169.727630]  ? lapic_next_deadline+0x35/0x60
[ 2169.728069]  run_timer_softirq+0x40/0x80
[ 2169.728475]  __do_softirq+0x1a1/0x509
[ 2169.728866]  irq_exit_rcu+0x95/0xc0
[ 2169.729241]  sysvec_apic_timer_interrupt+0x6b/0x80
[ 2169.729718]  </IRQ>
[ 2169.729993]  <TASK>
[ 2169.730259]  asm_sysvec_apic_timer_interrupt+0x16/0x20
[ 2169.730755] RIP: 0010:default_idle+0x13/0x20
[ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00
[ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242
[ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62
[ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55
[ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14
[ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0
[ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200
[ 2169.736478]  ? ct_kernel_exit.constprop.0+0xa2/0xc0
[ 2169.736954]  ? do_idle+0x285/0x290
[ 2169.737323]  default_idle_call+0x63/0x90
[ 2169.737730]  do_idle+0x285/0x290
[ 2169.738089]  ? arch_cpu_idle_exit+0x30/0x30
[ 2169.738511]  ? mark_held_locks+0x1a/0x80
[ 2169.738917]  ? lockdep_hardirqs_on_prepare+0x12e/0x200
[ 2169.739417]  cpu_startup_entry+0x30/0x40
[ 2169.739825]  start_secondary+0x19a/0x1c0
[ 2169.740229]  ? set_cpu_sibling_map+0xbd0/0xbd0
[ 2169.740673]  secondary_startup_64_no_verify+0x15d/0x16b
[ 2169.741179]  </TASK>

[ 2169.741686] Allocated by task 1098:
[ 2169.742058]  kasan_save_stack+0x1c/0x40
[ 2169.742456]  kasan_save_track+0x10/0x30
[ 2169.742852]  __kasan_kmalloc+0x83/0x90
[ 2169.743246]  mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll]
[ 2169.743730]  auxiliary_bus_probe+0x62/0xb0
[ 2169.744148]  really_probe+0x127/0x590
[ 2169.744534]  __driver_probe_device+0xd2/0x200
[ 2169.744973]  device_driver_attach+0x6b/0xf0
[ 2169.745402]  bind_store+0x90/0xe0
[ 2169.745761]  kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.746210]  vfs_write+0x41f/0x790
[ 2169.746579]  ksys_write+0xc7/0x160
[ 2169.746947]  do_syscall_64+0x6f/0x140
[ 2169.747333]  entry_SYSCALL_64_after_hwframe+0x46/0x4e

[ 2169.748049] Freed by task 1220:
[ 2169.748393]  kasan_save_stack+0x1c/0x40
[ 2169.748789]  kasan_save_track+0x10/0x30
[ 2169.749188]  kasan_save_free_info+0x3b/0x50
[ 2169.749621]  poison_slab_object+0x106/0x180
[ 2169.750044]  __kasan_slab_free+0x14/0x50
[ 2169.750451]  kfree+0x118/0x330
[ 2169.750792]  mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll]
[ 2169.751271]  auxiliary_bus_remove+0x2e/0x40
[ 2169.751694]  device_release_driver_internal+0x24b/0x2e0
[ 2169.752191]  unbind_store+0xa6/0xb0
[ 2169.752563]  kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.753004]  vfs_write+0x41f/0x790
[ 2169.753381]  ksys_write+0xc7/0x160
[ 2169.753750]  do_syscall_64+0x6f/0x140
[ 2169.754132]  entry_SYSCALL_64_after_hwframe+0x46/0x4e

[ 2169.754847] Last potentially related work creation:
[ 2169.755315]  kasan_save_stack+0x1c/0x40
[ 2169.755709]  __kasan_record_aux_stack+0x9b/0xf0
[ 2169.756165]  __queue_work+0x382/0x8f0
[ 2169.756552]  call_timer_fn+0x126/0x320
[ 2169.756941]  __run_timers.part.0+0x2ea/0x4c0
[ 2169.757376]  run_timer_softirq+0x40/0x80
[ 2169.757782]  __do_softirq+0x1a1/0x509

[ 2169.758387] Second to last potentially related work creation:
[ 2169.758924]  kasan_save_stack+0x1c/0x40
[ 2169.759322]  __kasan_record_aux_stack+0x9b/0xf0
[ 2169.759773]  __queue_work+0x382/0x8f0
[ 2169.760156]  call_timer_fn+0x126/0x320
[ 2169.760550]  __run_timers.part.0+0x2ea/0x4c0
[ 2169.760978]  run_timer_softirq+0x40/0x80
[ 2169.761381]  __do_softirq+0x1a1/0x509

[ 2169.761998] The buggy address belongs to the object at ffff88812b326a00
                which belongs to the cache kmalloc-256 of size 256
[ 2169.763061] The buggy address is located 112 bytes inside of
                freed 256-byte region [ffff88812b326a00, ffff88812b326b00)

[ 2169.764346] The buggy address belongs to the physical page:
[ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324
[ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2)
[ 2169.767048] page_type: 0xffffffff()
[ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001
[ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 2169.768899] page dumped because: kasan: bad access detected

[ 2169.769649] Memory state around the buggy address:
[ 2169.770116]  ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.770805]  ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2169.772173]                                                              ^
[ 2169.772787]  ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2169.773477]  ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.774160] ==================================================================
[ 2169.774845] ==================================================================

I didn't manage to reproduce it. Though the issue seems to be obvious.
There is a chance that the mlx5_dpll_remove() calls
cancel_delayed_work() when the work runs and manages to re-arm itself.
In that case, after delay timer triggers next attempt to queue it,
it works with freed memory.

Fix this by using cancel_delayed_work_sync() instead which makes sure
that work is done when it returns.

Fixes: 496fd0a26b ("mlx5: Implement SyncE support using DPLL infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206164328.360313-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 18:32:23 -08:00
Jiri Pirko
53c0441dd2 dpll: fix possible deadlock during netlink dump operation
Recently, I've been hitting following deadlock warning during dpll pin
dump:

[52804.637962] ======================================================
[52804.638536] WARNING: possible circular locking dependency detected
[52804.639111] 6.8.0-rc2jiri+ #1 Not tainted
[52804.639529] ------------------------------------------------------
[52804.640104] python3/2984 is trying to acquire lock:
[52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780
[52804.641417]
               but task is already holding lock:
[52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20
[52804.642747]
               which lock already depends on the new lock.

[52804.643551]
               the existing dependency chain (in reverse order) is:
[52804.644259]
               -> #1 (dpll_lock){+.+.}-{3:3}:
[52804.644836]        lock_acquire+0x174/0x3e0
[52804.645271]        __mutex_lock+0x119/0x1150
[52804.645723]        dpll_lock_dumpit+0x13/0x20
[52804.646169]        genl_start+0x266/0x320
[52804.646578]        __netlink_dump_start+0x321/0x450
[52804.647056]        genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.647575]        genl_rcv_msg+0x1ed/0x3b0
[52804.648001]        netlink_rcv_skb+0xdc/0x210
[52804.648440]        genl_rcv+0x24/0x40
[52804.648831]        netlink_unicast+0x2f1/0x490
[52804.649290]        netlink_sendmsg+0x36d/0x660
[52804.649742]        __sock_sendmsg+0x73/0xc0
[52804.650165]        __sys_sendto+0x184/0x210
[52804.650597]        __x64_sys_sendto+0x72/0x80
[52804.651045]        do_syscall_64+0x6f/0x140
[52804.651474]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.652001]
               -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}:
[52804.652650]        check_prev_add+0x1ae/0x1280
[52804.653107]        __lock_acquire+0x1ed3/0x29a0
[52804.653559]        lock_acquire+0x174/0x3e0
[52804.653984]        __mutex_lock+0x119/0x1150
[52804.654423]        netlink_dump+0xb3/0x780
[52804.654845]        __netlink_dump_start+0x389/0x450
[52804.655321]        genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.655842]        genl_rcv_msg+0x1ed/0x3b0
[52804.656272]        netlink_rcv_skb+0xdc/0x210
[52804.656721]        genl_rcv+0x24/0x40
[52804.657119]        netlink_unicast+0x2f1/0x490
[52804.657570]        netlink_sendmsg+0x36d/0x660
[52804.658022]        __sock_sendmsg+0x73/0xc0
[52804.658450]        __sys_sendto+0x184/0x210
[52804.658877]        __x64_sys_sendto+0x72/0x80
[52804.659322]        do_syscall_64+0x6f/0x140
[52804.659752]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.660281]
               other info that might help us debug this:

[52804.661077]  Possible unsafe locking scenario:

[52804.661671]        CPU0                    CPU1
[52804.662129]        ----                    ----
[52804.662577]   lock(dpll_lock);
[52804.662924]                                lock(nlk_cb_mutex-GENERIC);
[52804.663538]                                lock(dpll_lock);
[52804.664073]   lock(nlk_cb_mutex-GENERIC);
[52804.664490]

The issue as follows: __netlink_dump_start() calls control->start(cb)
with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken.
Then nlk->cb_mutex is released and taken again in netlink_dump(), while
dpll_lock still being held. That leads to ABBA deadlock when another
CPU races with the same operation.

Fix this by moving dpll_lock taking into dumpit() callback which ensures
correct lock taking order.

Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 18:29:21 -08:00
Dave Airlie
311520887d Merge tag 'drm-msm-fixes-2024-02-07' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.8-rc4

DPU:
- fix for kernel doc warnings and smatch warnings in dpu_encoder
- fix for smatch warning in dpu_encoder
- fix the bus bandwidth value for SDM670

DP:
- fixes to handle unknown bpc case correctly for DP. The current code was
  spilling over into other bits of DP configuration register, had to be
  fixed to avoid the extra shifts which were causing the spill over
- fix for MISC0 programming in DP driver to program the correct
  colorimetry value

GPU:
- dmabuf vmap fix
- a610 UBWC corruption fix (incorrect hbb)
- revert a commit that was making GPU recovery unreliable

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv+tb1+_cp7ftxcMZbbxE9810rvxeaC50eL=msQ+zkm0g@mail.gmail.com
2024-02-09 11:32:38 +10:00
Dave Airlie
b30bed9d00 amd-drm-fixes-6.8-2024-02-08:
amdgpu:
 - Misc NULL/bounds check fixes
 - ODM pipe policy fix
 - Aborted suspend fixes
 - JPEG 4.0.5 fix
 - DCN 3.5 fixes
 - PSP fix
 - DP MST fix
 - Phantom pipe fix
 - VRAM vendor fix
 - Clang fix
 - SR-IOV fix
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZcUGhAAKCRC93/aFa7yZ
 2Pp8AP4shwYR9OwKXx13nspSD/le4qvxHRrodeaBtSARWYXDywEA9wt+NZ3r/izk
 80R970NODmOawhixNRex08ggd2TTZwg=
 =25qe
 -----END PGP SIGNATURE-----

Merge tag 'amd-drm-fixes-6.8-2024-02-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.8-2024-02-08:

amdgpu:
- Misc NULL/bounds check fixes
- ODM pipe policy fix
- Aborted suspend fixes
- JPEG 4.0.5 fix
- DCN 3.5 fixes
- PSP fix
- DP MST fix
- Phantom pipe fix
- VRAM vendor fix
- Clang fix
- SR-IOV fix

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208165500.4887-1-alexander.deucher@amd.com
2024-02-09 11:21:23 +10:00
Dave Airlie
9da93fe430 Merge tag 'drm-intel-fixes-2024-02-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Just includes gvt-fixes-2024-02-05

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZcTETgXsejwVwat6@jlahtine-mobl.ger.corp.intel.com
2024-02-09 11:17:57 +10:00
Dave Airlie
60c16201b6 Driver Changes:
- Fix a loop in an error path
 - Fix a missing dma-fence reference
 - Fix a retry path on userptr REMAP
 - Workaround for a false gcc warning
 - Fix missing map of the usm batch buffer
   in the migrate vm.
 - Fix a memory leak.
 - Fix a bad assumption of used page size
 - Fix hitting a BUG() due to zero pages to map.
 - Remove some leftover async bind queue relics
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZcS1UgAKCRC4FpNVCsYG
 v8wMAQCfZF54SM76+feBVRzwXxhjAhqe2q9v/hZMHJOsF8Be7AD+PKhCfitzxKgJ
 m+K9kGwyI2Kv0VEQjIVPkucKEHA0FQc=
 =YJd2
 -----END PGP SIGNATURE-----

Merge tag 'drm-xe-fixes-2024-02-08' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes

Driver Changes:
- Fix a loop in an error path
- Fix a missing dma-fence reference
- Fix a retry path on userptr REMAP
- Workaround for a false gcc warning
- Fix missing map of the usm batch buffer
  in the migrate vm.
- Fix a memory leak.
- Fix a bad assumption of used page size
- Fix hitting a BUG() due to zero pages to map.
- Remove some leftover async bind queue relics

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZcS2LllawGifubsk@fedora
2024-02-09 11:12:09 +10:00
Dave Airlie
6c2bf9ca24 A null pointer dereference fix for v3d, a TTM pool initialization fix,
several fixes for nouveau around register size, DMA buffer leaks and API
 consistency, a multiple fixes for ivpu around MMU setup, initialization
 and firmware interactions.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZcTCuAAKCRDj7w1vZxhR
 xTI/AP4wnENmQLfNjGGAZNoAPgbonxSCsy2lNLDPj2LKCckpLgEApf0b8UCpbWGd
 3obSP91CD/WzyT6v+txDhXmG7STU3g0=
 =R6LM
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2024-02-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

A null pointer dereference fix for v3d, a TTM pool initialization fix,
several fixes for nouveau around register size, DMA buffer leaks and API
consistency, a multiple fixes for ivpu around MMU setup, initialization
and firmware interactions.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4wsi2i6kgkqdu7nzp4g7hxasbswnrmc5cakgf5zzvnix53u7lr@4rmp7hwblow3
2024-02-09 11:11:21 +10:00
Yicong Yang
5f70c6c559 perf test: Skip metric w/o event name on arm64 in stat STD output linter
stat+std_output.sh test fails on my arm64 machine:
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args Unknown event name in TopDownL1                 #     0.18 retiring
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args [Success]
Checking STD output: system wide [Success]
Checking STD output: interval [Success]
Checking STD output: per thread Unknown event name in tmux: server-1114960                                                   #     0.41 frontend_bound

When no args specified `perf stat` will add TopdownL1 metric group
and the output will be like:
[root@localhost shell]# perf stat -- stress-ng --vm 1 --timeout 1
stress-ng: info:  [3351733] setting to a 1 second run per stressor
stress-ng: info:  [3351733] dispatching hogs: 1 vm
stress-ng: info:  [3351733] successful run completed in 1.02s

 Performance counter stats for 'stress-ng --vm 1 --timeout 1':

          1,037.71 msec task-clock                       #    1.000 CPUs utilized
                13      context-switches                 #   12.528 /sec
                 1      cpu-migrations                   #    0.964 /sec
            67,544      page-faults                      #   65.090 K/sec
     2,691,932,561      cycles                           #    2.594 GHz                         (74.56%)
     6,571,333,653      instructions                     #    2.44  insn per cycle              (74.92%)
       521,863,142      branches                         #  502.901 M/sec                       (75.21%)
           425,879      branch-misses                    #    0.08% of all branches             (87.57%)
                        TopDownL1                 #     0.61 retiring                    (87.67%)
                                                  #     0.03 frontend_bound              (87.67%)
                                                  #     0.02 bad_speculation             (87.67%)
                                                  #     0.34 backend_bound               (74.61%)

       1.038138390 seconds time elapsed

       0.844849000 seconds user
       0.189053000 seconds sys

Metrics in group TopDownL1 don't have event name on arm64 but are not
listed in the $skip_metric list which they should be listed. Add them
to the skip list as what does for x86 platforms in [1].

[1] commit 4d60e83dfc ("perf test: Skip metrics w/o event name in stat STD output linter")

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: linuxarm@huawei.com
Cc: kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240207091222.54096-1-yangyicong@huawei.com
2024-02-08 15:59:47 -08:00
Adrian Hunter
94a830d7cc perf symbols: Slightly improve module file executable section mappings
Currently perf does not record module section addresses except for
the .text section. In general that means perf cannot get module section
mappings correct (except for .text) when loading symbols from a kernel
module file. (Note using --kcore does not have this issue)

Improve that situation slightly by identifying executable sections that
use the same mapping as the .text section. That happens when an
executable section comes directly after the .text section, both in memory
and on file, something that can be determined by following the same layout
rules used by the kernel, refer kernel layout_sections(). Note whether
that happens is somewhat arbitrary, so this is not a final solution.

Example from tracing a virtual machine process:

 Before:

  $ perf script | grep unknown
         CPU 0/KVM    1718   203.511270:     318341 cpu-cycles:P:  ffffffffc13e8a70 [unknown] (/lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko)
  $ perf script -vvv 2>&1 >/dev/null | grep kvm.intel | grep 'noinstr.text\|ffff'
  Map: 0-7e0 41430 [kvm_intel].noinstr.text
  Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko

 After:

  $ perf script | grep 203.511270
         CPU 0/KVM    1718   203.511270:     318341 cpu-cycles:P:  ffffffffc13e8a70 vmx_vmexit+0x0 (/lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko)
  $ perf script -vvv 2>&1 >/dev/null | grep kvm.intel | grep 'noinstr.text\|ffff'
  Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko

Reported-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208085326.13432-3-adrian.hunter@intel.com
2024-02-08 15:50:00 -08:00
Adrian Hunter
0bdfbd04c6 perf tools: Make it possible to see perf's kernel and module memory mappings
Dump kmaps if using 'perf --debug kmaps' or verbose > 2 (e.g. -vvv) for
tools 'perf script' and 'perf report' if there is no browser.

Example:

  $ perf --debug kmaps script 2>&1 >/dev/null | grep kvm.intel
  build id event received for /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko: 0691d75e10e72ebbbd45a44c59f6d00a5604badf [20]
  Map: 0-3a3 4f5d8 [kvm_intel].modinfo
  Map: 0-5240 5f280 [kvm_intel]__versions
  Map: 0-30 64 [kvm_intel].note.Linux
  Map: 0-14 644c0 [kvm_intel].orc_header
  Map: 0-5297 43680 [kvm_intel].rodata
  Map: 0-5bee 3b837 [kvm_intel].text.unlikely
  Map: 0-7e0 41430 [kvm_intel].noinstr.text
  Map: 0-2080 713c0 [kvm_intel].bss
  Map: 0-26 705c8 [kvm_intel].data..read_mostly
  Map: 0-5888 6a4c0 [kvm_intel].data
  Map: 0-22 70220 [kvm_intel].data.once
  Map: 0-40 705f0 [kvm_intel].data..percpu
  Map: 0-1685 41d20 [kvm_intel].init.text
  Map: 0-4b8 6fd60 [kvm_intel].init.data
  Map: 0-380 70248 [kvm_intel]__dyndbg
  Map: 0-8 70218 [kvm_intel].exit.data
  Map: 0-438 4f980 [kvm_intel]__param
  Map: 0-5f5 4ca0f [kvm_intel].rodata.str1.1
  Map: 0-3657 493b8 [kvm_intel].rodata.str1.8
  Map: 0-e0 70640 [kvm_intel].data..ro_after_init
  Map: 0-500 70ec0 [kvm_intel].gnu.linkonce.this_module
  Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko

The example above shows how the module section mappings are all wrong
except for the main .text mapping at 0xffffffffc13a7000.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208085326.13432-2-adrian.hunter@intel.com
2024-02-08 15:49:39 -08:00
Jakub Kicinski
3be042cf46 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/stmicro/stmmac/common.h
  38cc3c6dcc ("net: stmmac: protect updates of 64-bit statistics counters")
  fd5a6a7131 ("net: stmmac: est: Per Tx-queue error count for HLBF")
  c5c3e1bfc9 ("net: stmmac: Offload queueMaxSDU from tc-taprio")

drivers/net/wireless/microchip/wilc1000/netdev.c
  c901388028 ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000")
  328efda22a ("wifi: wilc1000: do not realloc workqueue everytime an interface is added")

net/unix/garbage.c
  11498715f2 ("af_unix: Remove io_uring code for GC.")
  1279f9d9de ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 15:30:33 -08:00
Linus Torvalds
1f719a2f3f Including fixes from WiFi and netfilter.
Current release - regressions:
 
   - nic: intel: fix old compiler regressions
 
   - netfilter: ipset: missing gc cancellations fixed
 
 Current release - new code bugs:
 
   - netfilter: ctnetlink: fix filtering for zone 0
 
 Previous releases - regressions:
 
   - core: fix from address in memcpy_to_iter_csum()
 
   - netfilter: nfnetlink_queue: un-break NF_REPEAT
 
   - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.
 
   - devlink: avoid potential loop in devlink_rel_nested_in_notify_work()
 
   - iwlwifi:
     - mvm: fix a battery life regression
     - fix double-free bug
 
   - mac80211: fix waiting for beacons logic
 
   - nic: nfp: flower: prevent re-adding mac index for bonded port
 
 Previous releases - always broken:
 
   - rxrpc: fix generation of serial numbers to skip zero
 
   - tipc: check the bearer type before calling tipc_udp_nl_bearer_add()
 
   - tunnels: fix out of bounds access when building IPv6 PMTU error
 
   - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed
 
   - nic: atlantic: fix DMA mapping for PTP hwts ring
 
 Misc:
 
   - selftests: more fixes to deal with very slow hosts
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmXEy4ISHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkd9EQALDZrYm67bPy7TX0+/EXS6wSBe4/ADNN
 4tZ+iFnLS/HTKx/YGJmC8pW3VOTgg2+Hko9nfXXQOKXuEPmgMQO8+bYFe1a0ZpPv
 1PH7+yq+OCniy16xUG66xv/+pDR5SjN6LuHvFYuCT3AZcmIr3jTXDa+XaCXCXZOu
 KOdXZ0RqSNe4hsJoU0lRstSwRzHL0UH1XibahQe6OJet6kI2wa9udMXhecZ4xY1i
 7FqRpB7b/vEYlxPTeb/h4U0PYchm1G/z0acV1BZ0+/PjuuvULT0gcWlHJm1X4K1l
 IKGibpet1OobQ7MxUjA0zLjcFoybl2AKNcVaBKQty+uKCUfkUIDLMB1cmLvUiCTi
 vV2993fvxQrwoZD5Y+LKVaAUjmlyLfkdMwjZ6b7YCmp1ENYeI+liho8xBxGN5eFI
 WqbYepOeG4QSoHqHPg6ny1xW7fdVPBYpWM3zrJG3h+SkHwPEOI7j/5tDqHA2rU32
 +rNpiB0r0/v54ymO3oahB3ttdA/LxWRls8OjRr8h4cUktwUnGtgW3WPmyHVCl4Q2
 xV5B2PZnzxIEkU+UPPPUelZh4Q/wtqtS5oKVT92Io3U6MXRfSC37g75C67p7jCsW
 TLV2RdhNk7RyuaybOC5VszZxKBgenOZNdAZZ6KJotYWzM/NQ+NCIKDBpDksM7Hva
 hVDYTlZOP+1e
 =ihj+
 -----END PGP SIGNATURE-----

Merge tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from WiFi and netfilter.

  Current release - regressions:

   - nic: intel: fix old compiler regressions

   - netfilter: ipset: missing gc cancellations fixed

  Current release - new code bugs:

   - netfilter: ctnetlink: fix filtering for zone 0

  Previous releases - regressions:

   - core: fix from address in memcpy_to_iter_csum()

   - netfilter: nfnetlink_queue: un-break NF_REPEAT

   - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.

   - devlink: avoid potential loop in devlink_rel_nested_in_notify_work()

   - iwlwifi:
       - mvm: fix a battery life regression
       - fix double-free bug

   - mac80211: fix waiting for beacons logic

   - nic: nfp: flower: prevent re-adding mac index for bonded port

  Previous releases - always broken:

   - rxrpc: fix generation of serial numbers to skip zero

   - tipc: check the bearer type before calling tipc_udp_nl_bearer_add()

   - tunnels: fix out of bounds access when building IPv6 PMTU error

   - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
     missed

   - nic: atlantic: fix DMA mapping for PTP hwts ring

  Misc:

   - selftests: more fixes to deal with very slow hosts"

* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  s390/qeth: Fix potential loss of L3-IP@ in case of network issues
  netfilter: ipset: Missing gc cancellations fixed
  octeontx2-af: Initialize maps.
  net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
  net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
  net: intel: fix old compiler regressions
  MAINTAINERS: Maintainer change for rds
  selftests: cmsg_ipv6: repeat the exact packet
  ...
2024-02-08 15:09:29 -08:00
Linus Torvalds
b0d5d0f737 This is a single fix for the AMD driver which affects developer
laptops, the pinctrl/GPIO driver won't probe on some systems.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmXE2T0ACgkQQRCzN7AZ
 XXPSsBAAkVqeDyGOm+gqDuaiV99fBRy5GvCKj0TVz39qbWCvMGgBliHyXNLttVm8
 BgMBnJkjSmV4XV8H21Lkq/Xhx99jYtpcLnyQ4+Va26ZUnJPqPQkY17Ele0clM3et
 Jkxg3VPoiGrIQ9ETIEwmKsOk69zPb0+Gt1TBJ3przzSOqnYzxEN0F2AZVm6fwFHy
 q510sGTTREXgiQL1nbmW4p9vI63d7Auwp6SUFAn+UANTnw8XV+kl0U2p2mWZ0Sgl
 z9fIHV5PjFK6lDuFlHbj3wsEtqDgBFP5JKgSzPFxGjlNTcpAsxDcJEem5IrQ0Qxw
 ttk+LobH4N1cE2vSDDzjasKM32NjZBrSX5G/ebAy4Aeh9oJq9HFzTnjzWByyzMEC
 HdHqCvR+DkscboMO+KOyTDTrW0CHgln8dv2btOsCgZPIH9dLWbxAETpHHzfGKSct
 2Zd+you2ZY5mYx9XCt90g/h3DXr2fsZL2D47OkQ+0BXMjWfNKQ1bdLkS6TI/uUvu
 k9201nwV4jwBgvzRltsXP0+rZINPXYxx8dHHBffsZLwBjQZQ8rUJNsWNbzmnolzg
 ySTa6xR88HjxmCrYnIp6BHchW0xY5wfr9s+GiUFwvUM3XXE9AiRAfXBxok09o+35
 mOFLsYQhZRfFO8xZ1TkYajQHXAUy4epNWyVHu7BINdovLxUByw4=
 =iBHl
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fix from Linus Walleij:
 "A single fix for the AMD driver which affects developer laptops, the
  pinctrl/GPIO driver won't probe on some systems"

* tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Add IRQF_ONESHOT to the interrupt request
2024-02-08 15:07:06 -08:00
Vincenzo Mezzela
185633d6be docs: staging: fix typo in docs
Resolve a spelling error in the documentation found
with codespell.

Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240208162748.111120-1-vincenzo.mezzela@gmail.com
2024-02-08 15:38:21 -07:00
Jens Axboe
5f63a493b9 nvme fixes for Linux 6.8
- Update a potentially stale firmware attribute (Maurizio)
  - Fixes for the recent verbose error logging (Keith, Chaitanya)
  - Protection information payload size fix for passthrough (Francis)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmXFRo8ACgkQPe3zGtjz
 RgnveRAAirSTuQYzlriUvVwFU2LYLBOtPdq5I+mxy0pXzcodQJLnP60IVOggGt9T
 CkGCKPwxQgA4ijkBFaP3YkIJUOXsmIb19QzSQTR0cqroPkp1By0fy7VYIb8eChmG
 JyuMhodw/zTkX0+bAx4CqdDFvJAJD5LwgDhNGp/ocUPkMXkDbfVEpIjK+vrsbr4V
 VChVSPlvQiNmhD4ZtoSIZfgAkA1Y/vX+dGmKv5OVqmpG6MCa21Juu5MsfUxs1nGS
 DPgiNY7tI+8jM3CgWGil6k7ij+heEHaeePGvzQEJfjHwTvPrEMI0byVkvJrUu9QZ
 pHgzfpGhJor5hx7DEGe+msBjC2YBhtfQj0r8zqMkhhGio9OifdtRtdY7gMdU1vW1
 hnL/7lSUNPyCRjAXr0acHTz+/5/3/uWk9SqtxOG59wP2LxRJjbXEoMVAoKPDXChD
 BRpTqA1X6UfgH7MJIqOccVlrDazyqGi0mrZ/9m3bqmhjCzhz2eMDU1hmNDpHZp1I
 AwLMg9pcLcdDibv4u8zOTq5dh2zo/Modqqm0OzLpOj+tXRZNS7VDVBbjVhgJMKQc
 bET+BsUXUL+WryyP/Eyu20GT5yrbdNRTd81eaFkHq9nR7VG6Q4AlfV71iRbIDWBa
 4JW7cxjBWjFVqjqViusCstvmKoVcn1i5ZR9mbaIYIc19lC33eBE=
 =uQIH
 -----END PGP SIGNATURE-----

Merge tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme into block-6.8

Pull NVMe fixes from Keith:

"nvme fixes for Linux 6.8

 - Update a potentially stale firmware attribute (Maurizio)
 - Fixes for the recent verbose error logging (Keith, Chaitanya)
 - Protection information payload size fix for passthrough (Francis)"

* tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme:
  nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
  nvme-core: fix comment to reflect right functions
  nvme: move passthrough logging attribute to head
  nvme-host: fix the updating of the firmware version
2024-02-08 15:05:18 -07:00
Christophe JAILLET
dec529b0b0 PCI: switchtec: Fix an error handling path in switchtec_pci_probe()
The commit in Fixes changed the logic on how resources are released and
introduced a new switchtec_exit_pci() that need to be called explicitly in
order to undo a corresponding switchtec_init_pci().

This was done in the remove function, but not in the probe.

Fix the probe now.

Fixes: df25461119 ("PCI: switchtec: Fix stdev_release() crash after surprise hot remove")
Link: https://lore.kernel.org/r/01446d2ccb91a578239915812f2b7dfbeb2882af.1703428183.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-02-08 15:35:38 -06:00
Christophe JAILLET
1e5c66afd4 PCI/P2PDMA: Fix a sleeping issue in a RCU read section
It is not allowed to sleep within a RCU read section, so use GFP_ATOMIC
instead of GFP_KERNEL here.

Link: https://lore.kernel.org/r/02d9ec4a10235def0e764ff1f5be881ba12e16e8.1704397858.git.christophe.jaillet@wanadoo.fr
Fixes: ae21f835a5 ("PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2024-02-08 15:31:43 -06:00
Dani Liberman
82bd83a0cf drm/xe/irq: allocate all possible msix interrupts
If platform supports MSIX, driver needs to allocate all possible
interrupts.

v2:
  - drop msix_cap and use the api return code instead.
  - fix commit message.

v3:
  - pass specific type in irq flags.

Cc: Ohad Sharabi <osharabi@habana.ai>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124075058.2302235-1-dliberman@habana.ai
2024-02-08 13:26:44 -08:00
Krzysztof Kozlowski
3d4dd10b37
spi: pxa2xx: Use typedef for dma_filter_fn
Use existing typedef for dma_filter_fn to avoid duplicating type
definition.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240208202154.630336-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-08 21:23:42 +00:00