All filtering parameters such as EtherType and VLAN TCI are stored in host
byte order except for the VLAN EtherType. Unify it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
All igc filter implementations use netdev_*() printing functions except for
the flex filters. Unify it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
HDP flush remapping is not done for VFs. Keep the original offsets in VF
environment.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y
and CONFIG_WERROR=y enabled) has a few new instances of
-Wframe-larger-than for the mode support and system configuration
functions:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
Without the sanitizers enabled, there are no warnings.
This was the catalyst for commit 6740ec97bc ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml2") and that same
change was made to dml in commit 5b750b2253 ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml") but the
frame_warn_flag variable was not applied to all files. Do so now to
clear up the warnings and make all these files consistent.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issue/1990
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dc_state_destruct() was refactored the new phantom_stream_count
and phantom_plane_count members weren't cleared.
Fixes: 012a04b1d6 ("drm/amd/display: Refactor phantom resource allocation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c:236:49-51: WARNING !A || A && B is equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8169
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The present way to fetch VRAM vendor information turns out to be not
reliable on GFX 9.4.3 dGPUs as well. Avoid using the data.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the CONFIG_DRM_AMD_DC_FP was added in some non-related FPU code,
which may cause confusion. This commit dropped some of the unnecessary
guards.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just adjust the code indentation in the header and add a simple comment
in the dm_cp_psp file.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just ensure that ODM optimization is disabled by default.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display code keeps getting improvements, and because of that, some
legacy code is left behind. This commit drops some of those unused
codes.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we would call apply_ctx_to_hw to enable and disable
phantom pipes. However, apply_ctx_to_hw can potentially update
non-phantom pipes as well which is undesired. Instead of calling
apply_ctx_to_hw as a whole, call the relevant helpers for each
phantom pipe when enabling / disabling which will avoid us modifying
hardware state for non-phantom pipes unknowingly.
The use case is for an FRL display where FRL_Update is requested
by the display. In this case link_state_valid flag is cleared in
a passive callback thread and should be handled in the next stream /
link update. However, due to the call to apply_ctx_to_hw for the
phantom pipes during a flip, the main pipes were modified outside
of the desired sequence (driver does not handle link_state_valid = 0
on flips).
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 6b2b782ad6.
Since, it was causing regression for some DRR scenarios.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the p_state type before update_clocks is called to ensure
accurate values are used for logging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a small delay before reading clks from hw, to ensure correct values
are used for logging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
0 nits is a valid default value for OLED panels. So, update the relevant
comment to account for that fact.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Camille Cho <camille.cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[How]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Default driver behaviour is 3-tap subsampling, so we should keep
it the same for test patterns as well. However, it is also useful
to force 1-tap subsampling for testing purposes.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Workaroud for a race condition where DMCUB is in the process of
committing to IPS1 during the handshake causing us to miss the
transition into IPS2 and touch the INBOX1 RPTR causing a HW hang.
[How]
Disable the reallow to ensure that we have enough of a gap between entry
and exit and we're not seeing back-to-back wake_and_executes.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ta if invoke node buffer
|-------- ta type ----------|
|-------- ta id ----------|
|-------- cmd id ----------|
|------ shared buf len -----|
|------ shared buffer ------|
ta if invoke node buffer is as above, copy shared buffer data to correct location
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To match firmware measurements and avoid hanging when accessing HW
that's in idle.
[How]
Increase the delays to what we've measured.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We're still missing a few and we'd like to avoid continuining when
a hang occurs for debug purposes.
[How]
Add the loop anywhere we try to wait on rptr == wptr in dc_dmub_srv.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The issue arises when the array 'adev->vcn.vcn_config' is accessed
before checking if the index 'adev->vcn.num_vcn_inst' is within the
bounds of the array.
The fix involves moving the bounds check before the array access. This
ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array
before it is used as an index.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use.
Fixes: a0ccc717c4 ("drm/amdgpu/discovery: validate VCN and SDMA instances")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Any interface that touches registers needs to wake up the system.
[How]
Add a new interface dc_exit_ips_for_hw_access that wraps the check
for IPS support and insert it into the public DC interfaces that
touch registers.
We don't re-enter, since we expect that the enter/exit to have been done
on the DM side.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hardware register definition changed
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A supplement to commit: 615dd56ac5
There is an irq warning of jpeg during resume in s2idle process. No irq enabled in jpeg 4.0.5 resume.
Fixes: 615dd56ac5 ("drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend")
Signed-off-by: Li Ma <li.ma@amd.com>
Acked-By: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the s3 suspend abort case some type of gfx9 power
rail not turn off from FCH side and this will put the
GPU in an unknown power status, so let's reset the gpu
to a known good power state before reinitialize gpu
device.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the suspend abort cases, the gfx power rail doesn't turn off so
some GFXDEC registers/CSB can't reset to default value and at this
moment reinitialize GFXDEC/CSB will result in an unexpected error.
So let skip those program sequence for the suspend abort case.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When populating dml pipes, odm combine policy should be assigned based
on the pipe topology of the context passed in. DML pipes could be
repopulated multiple times during single validate bandwidth attempt. We
need to make sure that whenever we repopulate the dml pipes it is always
aligned with the updated context. There is a case where DML pipes get
repopulated during FPO optimization after ODM combine policy is changed.
Since in the current code we reinitlaize ODM combine policy, even though
the current context has ODM combine enabled, we overwrite it despite the
pipes are already split. This causes DML to think that MPC combine is
used so we mistakenly enable MPC combine because we apply pipe split
with ODM combine policy reset. This issue doesn't impact non windowed
MPO with ODM case because the legacy policy has restricted use cases. We
don't encounter the case where both ODM and FPO optimizations are
enabled together. So we decide to leave it as is because it is about to
be replaced anyway.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Only required if FIXED_VS retimer does not support DP2-capable.
[HOW]
Gate link rate toggle with DP 128b/132b LTTPR channel coding cap check.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD topology includes cache line size, but we have not been
filling that information out unless we are parsing a CRAT table.
Fill in this information for the devices where we have cache
information structs, and pipe this information to the topology
sysfs files.
v2: squash in fix from Joe (Alex)
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The New sequence has been in use in DCN314 with no regressions
introduced. Therefore, it is safe to enable this sequence for all
devices using FIXED_VS retimers. So, remove the legacy codepath and its
associated config flag.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use reverse xmas tree coding style convention in igc_add_flex_filter().
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We want programs besides the compositor to be able to enable or disable
panel power saving features. However, since they are currently only
configurable through DRM properties, that isn't possible. So, to remedy
that issue introduce a new "panel_power_savings" sysfs attribute.
v2: squash in fix from Hamza (Alex)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kernel build regressions/improvements email contained a couple of
issues with old compilers (in fact all the reports were on different
architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET()
conversions. They're all because an integer #define that should have
been declared as unsigned, was shifted to the point that it could set
the sign bit.
The fix just involves making sure the defines use the "U" identifier on
the constants to make sure they're unsigned. Should make the checkers
happier.
Confirmed with objdump before/after that there is no change to the
binaries.
Issues were reported as follows:
./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET'
(FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US))
^
./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’
orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver);
^
./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’
u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M,
^
./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’
oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype);
^
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/lkml/d03e90ca-8485-4d1b-5ec1-c3398e0e8da@linux-m68k.org/ #i40e #ice
Fixes: 62589808d7 ("i40e: field get conversion")
Fixes: 5a259f8e0b ("ice: field get conversion")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20240206022906.2194214-1-jesse.brandeburg@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A wrapper function is available since the commit 890cc39a87
("drivers: provide devm_platform_get_and_ioremap_resource()").
Thus reuse existing functionality instead of keeping duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Tested-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/29e9dc0f-5597-4fee-be5c-25a5ab4fe2dc@web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
init_dummy_netdev() always returns zero and all the callers do not check
the returned value. Set the function to not return value, as it is not
really used today.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240205103022.440946-1-amcohen@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At this point, Santosh has moved onto other things and I am happy
to take over the role of rds maintainer. Update the MAINTAINERS
accordingly.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://lore.kernel.org/r/20240205190343.112436-1-allison.henderson@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: eee network driver cleanups
Since commit d1420bb995 ("net: phy: improve generic EEE ethtool
functions") changed phylib to set eee->eee_active and eee->eee_enabled,
overriding anything that drivers have set these to prior to calling
phy_ethtool_get_eee().
Therefore, drivers setting these members becomes redundant, since
phylib overwrites the values they set. This series finishes off
Heiner's work in the referenced commit by removing these redundant
writes in various drivers and any associated code or structure members
that become unnecessary.
====================
Link: https://lore.kernel.org/r/Zb9/O81fVAZw4ANr@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
b53_get_mac_eee() sets both eee_enabled and eee_active, and then
returns zero.
dsa_slave_get_eee(), which calls this function, will then continue to
call phylink_ethtool_get_eee(), which will return -EOPNOTSUPP if there
is no PHY present, otherwise calling phy_ethtool_get_eee() which in
turn will call genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Thus, when there is no PHY, dsa_slave_get_eee() will fail with
-EOPNOTSUPP, meaning eee_enabled and eee_active will not be returned to
userspace. When there is a PHY, eee_enabled and eee_active will be
overwritten by phylib, making the setting of these members in
b53_get_mac_eee() entirely unnecessary.
Remove this code, thus simplifying b53_get_mac_eee().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1rWbNI-002cCz-4x@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bcmasp_get_eee() sets edata->eee_active and edata->eee_enabled from
its own copy, and then calls phy_ethtool_get_eee() which in turn will
call genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Therefore, setting these members in bcmasp_get_eee() is redundant, and
can be removed. This also makes intf->eee.eee_active unnecessary, so
remove this and use a local variable where appropriate.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rWbNC-002cCt-W7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bcmgenet_get_eee() sets edata->eee_active and edata->eee_enabled from
its own copy, and then calls phy_ethtool_get_eee() which in turn will
call genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Therefore, setting these members in bcmgenet_get_eee() is redundant,
and can be removed. This also makes priv->eee.eee_active unnecessary,
so remove this and use a local variable where appropriate.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rWbN7-002cCn-RO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fec_enet_get_eee() sets edata->eee_active and edata->eee_enabled from
its own copy, and then calls phy_ethtool_get_eee() which in turn will
call genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Therefore, setting these members in fec_enet_get_eee() is redundant.
Remove this, and remove the setting of fep->eee.eee_active member which
becomes a write-only variable.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1rWbN2-002cCh-MY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sxgbe_get_eee() sets edata->eee_active and edata->eee_enabled from its
own copy, and then calls phy_ethtool_get_eee() which in turn will call
genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Therefore, setting these members in sxgbe_get_eee() is redundant.
Remove this, and remove the priv->eee_active member which then becomes
a write-only variable.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rWbMx-002cCb-IU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_ethtool_op_get_eee() sets both eee_enabled and eee_active, and
then goes on to call phylink_ethtool_get_eee().
phylink_ethtool_get_eee() will return -EOPNOTSUPP if there is no PHY
present, otherwise calling phy_ethtool_get_eee() which in turn will call
genphy_c45_ethtool_get_eee().
genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.
Thus, when there is no PHY, stmmac_ethtool_op_get_eee() will fail with
-EOPNOTSUPP, meaning eee_enabled and eee_active will not be returned to
userspace. When there is a PHY, eee_enabled and eee_active will be
overwritten by phylib, making the setting of these members in
stmmac_ethtool_op_get_eee() entirely unnecessary.
Remove this code, thus simplifying stmmac_ethtool_op_get_eee().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/E1rWbMs-002cCV-EE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently pipe mode doesn't set the file size and it results in a
misleading message of 0 data size at the end. Although it might miss
some accounting for pipe header or more, just displaying the data size
would reduce the possible confusion.
Before:
$ perf record -o- perf test -w noploop | perf report -i- -q --percent-limit=1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ] <====== (here)
99.58% perf perf [.] noploop
After:
$ perf record -o- perf test -w noploop | perf report -i- -q --percent-limit=1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.229 MB - ]
99.46% perf perf [.] noploop
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240112231340.779469-1-namhyung@kernel.org