Commit graph

1,264,895 commits

Author SHA1 Message Date
Mark Brown
e81fdba020
ALSA: Various fixes for Cirrus Logic CS35L56 support
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

These patches fixe various things that were undocumented, unknown or
uncertain when the original driver code was written. And also a few
things that were just bugs.
2024-02-01 17:45:32 +00:00
Douglas Anderson
735b7636d1 lkdtm/bugs: In lkdtm_HUNG_TASK() use BUG(), not BUG_ON(1)
In commit edb6538da3df ("lkdtm/bugs: Adjust lkdtm_HUNG_TASK() to avoid
tail call optimization") we marked lkdtm_HUNG_TASK() as
__noreturn. The compiler gets unhappy if it thinks a __noreturn
function might return, so there's a BUG_ON(1) at the end. Any human
can see that the function won't return and the compiler can figure
that out too. Except when it can't.

The MIPS architecture defines HAVE_ARCH_BUG_ON and defines its own
version of BUG_ON(). The MIPS version of BUG_ON() is not a macro but
is instead an inline function. Apparently this prevents the compiler
from realizing that the condition to BUG_ON() is constant and that the
function will never return.

Let's change the BUG_ON(1) to just BUG(), which it should have been to
begin with. The only reason I used BUG_ON(1) to begin with was because
I was used to using WARN_ON(1) when writing test code and WARN() and
BUG() are oddly inconsistent in this manner. :-/

Fixes: edb6538da3df ("lkdtm/bugs: Adjust lkdtm_HUNG_TASK() to avoid tail call optimization")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401262204.wUFKRYZF-lkp@intel.com/
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240126072852.1.Ib065e528a8620474a72f15baa2feead1f3d89865@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-01 09:44:07 -08:00
Douglas Anderson
6dde3569b8 lkdtm/bugs: Adjust lkdtm_HUNG_TASK() to avoid tail call optimization
When testing with lkdtm_HUNG_TASK() and looking at the output, I
expected to see lkdtm_HUNG_TASK() in the stack crawl but it wasn't
there. Instead, the top function on at least some devices was
schedule() due to tail call optimization.

Let's do two things to help here:
1. We'll mark this as "__noreturn". On GCC at least this is documented
   to prevent tail call optimization. The docs [1] say "In order to
   preserve backtraces, GCC will never turn calls to noreturn
   functions into tail calls."
2. We'll add a BUG_ON(1) at the end which means that schedule() is no
   longer a tail call. Note that this is potentially important because
   if we _did_ end up returning from schedule() due to some weird
   issue then we'd potentially be violating the "noreturn" that we
   told the compiler about. BUG is the right thing to do here.

[1] https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240122164935.2.I26e8f68c312824fcc80c19d4e91de2d2bef958f0@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-01 09:44:07 -08:00
Douglas Anderson
84022cff50 lkdtm: Make lkdtm_do_action() return to avoid tail call optimization
The comments for lkdtm_do_action() explicitly call out that it
shouldn't be inlined because we want it to show up in stack
crawls. However, at least with some compilers / options it's still
vanishing due to tail call optimization. Let's add a return value to
the function to make it harder for the compiler to do tail call
optimization here.

Now that we have a return value, we can actually use it in the
callers, which is a minor improvement in the code.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240122164935.1.I345e485f36babad76370c59659a706723750d950@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-01 09:44:07 -08:00
Matt Bobrowski
1581e5118e bpf: Minor clean-up to sleepable_lsm_hooks BTF set
There's already one main CONFIG_SECURITY_NETWORK ifdef block within
the sleepable_lsm_hooks BTF set. Consolidate this duplicated ifdef
block as there's no need for it and all things guarded by it should
remain in one place in this specific context.

Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/Zbt1smz43GDMbVU3@google.com
2024-02-01 18:37:45 +01:00
Sean Christopherson
83bdfe04c9 KVM: x86/pmu: Avoid CPL lookup if PMC enabline for USER and KERNEL is the same
Don't bother querying the CPL if a PMC is (not) counting for both USER and
KERNEL, i.e. if the end result is guaranteed to be the same regardless of
the CPL.  Querying the CPL on Intel requires a VMREAD, i.e. isn't free,
and a single CMP+Jcc is cheap.

Link: https://lore.kernel.org/r/20231110022857.1273836-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:35:48 -08:00
Sean Christopherson
e35529fb4a KVM: x86/pmu: Check eventsel first when emulating (branch) insns retired
When triggering events, i.e. emulating PMC events in software, check for
a matching event selector before checking the event is allowed.  The "is
allowed" check *might* be cheap, but it could also be very costly, e.g. if
userspace has defined a large PMU event filter.  The event selector check
on the other hand is all but guaranteed to be <10 uops, e.g. looks
something like:

   0xffffffff8105e615 <+5>:	movabs $0xf0000ffff,%rax
   0xffffffff8105e61f <+15>:	xor    %rdi,%rsi
   0xffffffff8105e622 <+18>:	test   %rax,%rsi
   0xffffffff8105e625 <+21>:	sete   %al

Link: https://lore.kernel.org/r/20231110022857.1273836-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:35:48 -08:00
Sean Christopherson
afda2d7666 KVM: x86/pmu: Expand the comment about what bits are check emulating events
Expand the comment about what bits are and aren't checked when emulating
PMC events in software.  As pointed out by Jim, AMD's mask includes bits
35:32, which on Intel overlap with the IN_TX and IN_TXCP bits (32 and 33)
as well as reserved bits (34 and 45).

Checking The IN_TX* bits is actually correct, as it's safe to assert that
the vCPU can't be in an HLE/RTM transaction if KVM is emulating an
instruction, i.e. KVM *shouldn't count if either of those bits is set.

For the reserved bits, KVM is has equal odds of being right if Intel adds
new behavior, i.e. ignoring them is just as likely to be correct as
checking them.

Opportunistically explain *why* the other flags aren't checked.

Suggested-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20231110022857.1273836-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:35:48 -08:00
Sean Christopherson
f19063b1ca KVM: x86/pmu: Snapshot event selectors that KVM emulates in software
Snapshot the event selectors for the events that KVM emulates in software,
which is currently instructions retired and branch instructions retired.
The event selectors a tied to the underlying CPU, i.e. are constant for a
given platform even though perf doesn't manage the mappings as such.

Getting the event selectors from perf isn't exactly cheap, especially if
mitigations are enabled, as at least one indirect call is involved.

Snapshot the values in KVM instead of optimizing perf as working with the
raw event selectors will be required if KVM ever wants to emulate events
that aren't part of perf's uABI, i.e. that don't have an "enum perf_hw_id"
entry.

Link: https://lore.kernel.org/r/20231110022857.1273836-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:35:48 -08:00
Sean Christopherson
d2b321ea93 KVM: x86/pmu: Process only enabled PMCs when emulating events in software
Mask off disabled counters based on PERF_GLOBAL_CTRL *before* iterating
over PMCs to emulate (branch) instruction required events in software.  In
the common case where the guest isn't utilizing the PMU, pre-checking for
enabled counters turns a relatively expensive search into a few AND uops
and a Jcc.

Sadly, PMUs without PERF_GLOBAL_CTRL, e.g. most existing AMD CPUs, are out
of luck as there is no way to check that a PMC isn't being used without
checking the PMC's event selector.

Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Link: https://lore.kernel.org/r/20231110022857.1273836-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:35:48 -08:00
Sean Christopherson
e5a65d4f72 KVM: x86/pmu: Add macros to iterate over all PMCs given a bitmap
Add and use kvm_for_each_pmc() to dedup a variety of open coded for-loops
that iterate over valid PMCs given a bitmap (and because seeing checkpatch
whine about bad macro style is always amusing).

No functional change intended.

Link: https://lore.kernel.org/r/20231110022857.1273836-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:35:48 -08:00
Sean Christopherson
004a0aa56e KVM: x86/pmu: Snapshot and clear reprogramming bitmap before reprogramming
Refactor the handling of the reprogramming bitmap to snapshot and clear
to-be-processed bits before doing the reprogramming, and then explicitly
set bits for PMCs that need to be reprogrammed (again).  This will allow
adding a macro to iterate over all valid PMCs without having to add
special handling for the reprogramming bit, which (a) can have bits set
for non-existent PMCs and (b) needs to clear such bits to avoid wasting
cycles in perpetuity.

Note, the existing behavior of clearing bits after reprogramming does NOT
have a race with kvm_vm_ioctl_set_pmu_event_filter().  Setting a new PMU
filter synchronizes SRCU _before_ setting the bitmap, i.e. guarantees that
the vCPU isn't in the middle of reprogramming with a stale filter prior to
setting the bitmap.

Link: https://lore.kernel.org/r/20231110022857.1273836-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:35:48 -08:00
Sean Christopherson
b31880ca2f KVM: x86/pmu: Move pmc_idx => pmc translation helper to common code
Add a common helper for *internal* PMC lookups, and delete the ops hook
and Intel's implementation.  Keep AMD's implementation, but rename it to
amd_pmu_get_pmc() to make it somewhat more obvious that it's suited for
both KVM-internal and guest-initiated lookups.

Because KVM tracks all counters in a single bitmap, getting a counter
when iterating over a bitmap, e.g. of all valid PMCs, requires a small
amount of math, that while simple, isn't super obvious and doesn't use the
same semantics as PMC lookups from RDPMC!  Although AMD doesn't support
fixed counters, the common PMU code still behaves as if there a split, the
high half of which just happens to always be empty.

Opportunstically add a comment to explain both what is going on, and why
KVM uses a single bitmap, e.g. the boilerplate for iterating over separate
bitmaps could be done via macros, so it's not (just) about deduplicating
code.

Link: https://lore.kernel.org/r/20231110022857.1273836-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:35:47 -08:00
Sean Christopherson
be6b067dae KVM: x86/pmu: Add common define to capture fixed counters offset
Add a common define to "officially" solidify KVM's split of counters,
i.e. to commit to using bits 31:0 to track general purpose counters and
bits 63:32 to track fixed counters (which only Intel supports).  KVM
already bleeds this behavior all over common PMU code, and adding a KVM-
defined macro allows clarifying that the value is a _base_, as oppposed to
the _flag_ that is used to access fixed PMCs via RDPMC (which perf
confusingly calls INTEL_PMC_FIXED_RDPMC_BASE).

No functional change intended.

Link: https://lore.kernel.org/r/20231110022857.1273836-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:34:31 -08:00
Sean Christopherson
f933b88e20 KVM: x86/pmu: Zero out PMU metadata on AMD if PMU is disabled
Move the purging of common PMU metadata from intel_pmu_refresh() to
kvm_pmu_refresh(), and invoke the vendor refresh() hook if and only if
the VM is supposed to have a vPMU.

KVM already denies access to the PMU based on kvm->arch.enable_pmu, as
get_gp_pmc_amd() returns NULL for all PMCs in that case, i.e. KVM already
violates AMD's architecture by not virtualizing a PMU (kernels have long
since learned to not panic when the PMU is unavailable).  But configuring
the PMU as if it were enabled causes unwanted side effects, e.g. calls to
kvm_pmu_trigger_event() waste an absurd number of cycles due to the
all_valid_pmc_idx bitmap being non-zero.

Fixes: b1d66dad65 ("KVM: x86/svm: Add module param to control PMU virtualization")
Reported-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Closes: https://lore.kernel.org/all/20231109180646.2963718-2-khorenko@virtuozzo.com
Link: https://lore.kernel.org/r/20231110022857.1273836-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 09:34:31 -08:00
Jakub Kicinski
4e192be1a2 Here are some batman-adv bugfixes:
- fix a timeout issue and a memory leak in batman-adv multicast,
    by Linus Lüssing (2 patches)
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmW7eXMWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoSb2D/9p7/fQhF8DFuEFGi9zE0afjMno
 VrVjg7ZBm8Y2nJsF8neada4RXNTRdPzznd5fqlx0KFNUCpxoHbDDivtriA7/NsY/
 UNoa6/0eHA0lh2dPqbJ4n1IkgJvneXnF9YraK5g62PRjDIjC0Zk5nll+fb/ve35+
 p+7ABe3edf4UH2LVliaR1WIfkIfbPPFdWjNHUAObdTC+li58BehB+M1EL28X8vz7
 +fNCS/320FhGizAkKj9saByhSu2/LgpSvb4xspA9TJBSr69jt9XPaiZoutWcMkHa
 FHK9M4sJ12ZLHihLVq7wgg193481sWllwZb75TzqOfYw6pGLe8RggbT3Wg4NbW8n
 7DsdIvTNHzW/9Etb56HNM/dSifIerSny/dM0CZjb2UEyPqeVmHfV2Hfqi87Xe7K6
 QTVShIDLTk4eTAHs4UjD/EmmtuEggo9J1jPK73GmPWbjxaaEWJuImlos9R3J+EdQ
 sC71oWGixJmTftsRif74q9UZpdssTZpmFpbl57xvksD3TnOB11yK7d6DlQcrLr//
 8ndScm7n7qw67uoYcqRHanK1zCwuQeBl0nUNt29PfB2x41Ya/bUpBM5k07nolILP
 3F994yJODM1njh+bjNHpfUYtbxgVznMieLF96HR6xfP5AVVmgBpGfmwbD5LB7xya
 5f1XzQDQoHkZb9zafw==
 =vWTg
 -----END PGP SIGNATURE-----

Merge tag 'batadv-net-pullrequest-20240201' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - fix a timeout issue and a memory leak in batman-adv multicast,
   by Linus Lüssing (2 patches)

* tag 'batadv-net-pullrequest-20240201' of git://git.open-mesh.org/linux-merge:
  batman-adv: mcast: fix memory leak on deleting a batman-adv interface
  batman-adv: mcast: fix mcast packet type counter on timeouted nodes
====================

Link: https://lore.kernel.org/r/20240201110110.29129-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:25:53 -08:00
Maurizio Lombardi
f0377ff975 nvme-host: fix the updating of the firmware version
The original code didn't update the firmware version if the
"next slot" of the AFI register isn't zero or if the
"current slot" field is zero; in those cases it assumed
that a reset was needed.

However, the NVMe specification doesn't exclude the possibility that
the "next slot" value is equal to the "current slot" value,
meaning that the same firmware slot will be activated after performing
a controller level reset; in this case a reset is clearly not
necessary and we can safely update the firmware version.

Modify the code so the kernel will report that a Controller Level Reset
is needed only in the following cases:

1) If the "current slot" field is zero. This is invalid and means that
   something is wrong, a reset is needed.

or

2) if the "next slot" field isn't zero AND it's not equal to the
   "current slot" value. This means that at the next reset a different
   firmware slot will be activated.

Fixes: 983a338b96 ("nvme: update firmware version after commit")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-02-01 09:21:32 -08:00
Donald Hunter
069a6ed299 doc/netlink/specs: Add missing attr in rt_link spec
IFLA_DPLL_PIN was added to rt_link messages but not to the spec, which
breaks ynl. Add the missing definitions to the rt_link ynl spec.

Fixes: 5f18426928 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201113853.37432-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:19:59 -08:00
Jakub Kicinski
93561eefbf netfilter pull request 24-01-31
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmW6zq0ACgkQ1V2XiooU
 IOTTbQ//SnsPif56pzc+CzOhb6v3Gih1o+4dyH1GX5JHozwmuvFx4Iw3jz5DgMsL
 vzQBb89htlGqdj3tXnuX0mVZEGDBr/KO8jNT7Qnxrms3oRfhu+UKBl8y51f73LRe
 79vqKaMmmaUen/fzyhTqxyqQFYzguEAzXq1Rs/arTuNjhnKLf4/R255sQRTRUe0v
 08KEk/7D3FnmJ0pUtoh3E7mukodl2e5w/UH9CrerTtJ04jaRi17I+QmW3TmVFjx4
 8k9+echgiF7iKPLlPJRWhHgzXPKEwUupu8rDemIg+QXNsicp+2T8HNCmJjE3Y8Qx
 jcEpqZOMxmlnvBeoelrGqnJ1GVAWTgOhi2R2hLLYEyRJ8LpIxhcZLI6ovQTO2u3v
 HIuPdAMmcsLI1wX9Lq/ybF9TqrCH1l2M9LqVerz139tXgDgOerMZvjsHp8Xv7nQz
 L2HDA39EI+ZPEEh3SCdomrydM2gp3r3d1hp4SUZLMFUZYR/CEUYt8DlX+iHWGgn0
 GaVKgmgf/PqokyhYxpihB4m/ctmghPcxkscPaEDJas4uKYqDRRB1c1btA2f7IVnr
 8sMt6gSG0HQgK6OoD6Sl+nACt3EoPdg/NaivrJ1rmWmQpb6EhIqJdILMZ0+s+lyx
 WBJnI16uJQUPVifGUb30qJdm/Go0cix5fOVJRMAaIUU0IFgezkE=
 =OdAk
 -----END PGP SIGNATURE-----

Merge tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) TCP conntrack now only evaluates window negotiation for packets in
   the REPLY direction, from Ryan Schaefer. Otherwise SYN retransmissions
   trigger incorrect window scale negotiation. From Ryan Schaefer.

2) Restrict tunnel objects to NFPROTO_NETDEV which is where it makes sense
   to use this object type.

3) Fix conntrack pick up from the middle of SCTP_CID_SHUTDOWN_ACK packets.
   From Xin Long.

4) Another attempt from Jozsef Kadlecsik to address the slow down of the
   swap command in ipset.

5) Replace a BUG_ON by WARN_ON_ONCE in nf_log, and consolidate check for
   the case that the logger is NULL from the read side lock section.

6) Address lack of sanitization for custom expectations. Restrict layer 3
   and 4 families to what it is supported by userspace.

* tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
  netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger
  netfilter: ipset: fix performance regression in swap operation
  netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
  netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV
  netfilter: conntrack: correct window scaling with retransmitted SYN
====================

Link: https://lore.kernel.org/r/20240131225943.7536-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:14:13 -08:00
Pavan Kumar Linga
f0588b157f idpf: avoid compiler padding in virtchnl2_ptype struct
In the arm random config file, kconfig option 'CONFIG_AEABI' is
disabled which results in adding the compiler flag '-mabi=apcs-gnu'.
This causes the compiler to add padding in virtchnl2_ptype
structure to align it to 8 bytes, resulting in the following
size check failure:

include/linux/build_bug.h:78:41: error: static assertion failed: "(6) == sizeof(struct virtchnl2_ptype)"
      78 | #define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
         |                                         ^~~~~~~~~~~~~~
include/linux/build_bug.h:77:34: note: in expansion of macro '__static_assert'
      77 | #define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
         |                                  ^~~~~~~~~~~~~~~
drivers/net/ethernet/intel/idpf/virtchnl2.h:26:9: note: in expansion of macro 'static_assert'
      26 |         static_assert((n) == sizeof(struct X))
         |         ^~~~~~~~~~~~~
drivers/net/ethernet/intel/idpf/virtchnl2.h:982:1: note: in expansion of macro 'VIRTCHNL2_CHECK_STRUCT_LEN'
     982 | VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype);
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~

Avoid the compiler padding by using "__packed" structure
attribute for the virtchnl2_ptype struct. Also align the
structure by using "__aligned(2)" for better code optimization.

Fixes: 0d7502a9b4 ("virtchnl: add virtchnl version 2 ops")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312220250.ufEm8doQ-lkp@intel.com
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh  <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240131222241.2087516-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:10:41 -08:00
Jakub Kicinski
79144a818a Merge branch 'mptcp-fixes-for-recent-issues-reported-by-ci-s'
Matthieu Baerts says:

====================
mptcp: fixes for recent issues reported by CI's

This series of 9 patches fixes issues mostly identified by CI's not
managed by the MPTCP maintainers. Thank you Linero (LKFT) and Netdev
maintainers (NIPA) for running our kunit and selftests tests!

For the first patch, it took a bit of time to identify the root cause.
Some MPTCP Join selftest subtests have been "flaky", mostly in slow
environments. It appears to be due to the use of a TCP-specific helper
on an MPTCP socket. A fix for kernels >= v5.15.

Patches 2 to 4 add missing kernel config to support NetFilter tables
needed for IPTables commands. These kconfigs are usually enabled in
default configurations, but apparently not for all architectures.
Patches 2 and 3 can be backported up to v5.11 and the 4th one up to
v5.19.

Patch 5 increases the time limit for MPTCP selftests. It appears that
many CI's execute tests in a VM without acceleration supports, e.g. QEmu
without KVM. As a result, the tests take longer. Plus, there are more
and more tests. This patch modifies the timeout added in v5.18.

Patch 6 reduces the maximum rate and delay of the different links in
some Simult Flows selftest subtests. The goal is to let slow VMs reach
the maximum speed. The original rate was introduced in v5.11.

Patch 7 lets CI changing the prefix of the subtests titles, to be able
to run the same selftest multiple times with different parameters. With
different titles, tests will be considered as different and not override
previous results as it is the case with some CI envs. Subtests have been
introduced in v6.6.

Patch 8 and 9 make some MPTCP Join selftest subtests quicker by stopping
the transfer when the expected events have been seen. Patch 8 can be
backported up to v6.5.

Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================

Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-0-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:41 -08:00
Matthieu Baerts (NGI0)
04b57c9e09 selftests: mptcp: join: stop transfer when check is done (part 2)
Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.

While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.

Fixes: b2e2248f36 ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081 ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:38 -08:00
Matthieu Baerts (NGI0)
31ee4ad86a selftests: mptcp: join: stop transfer when check is done (part 1)
Since the "Fixes" commit mentioned below, "userspace pm" subtests of
mptcp_join selftests introduced in v6.5 are launching the whole transfer
in the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds in slow environments.

Note that old versions will need commit bdbef0a6ff ("selftests: mptcp:
add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.

Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff: selftests: mptcp: add mptcp_lib_kill_wait
Cc: stable@vger.kernel.org # 6.5.x
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:38 -08:00
Matthieu Baerts (NGI0)
de46d138e7 selftests: mptcp: allow changing subtests prefix
If a CI executes the same selftest multiple times with different
options, all results from the same subtests will have the same title,
which confuse the CI. With the same title printed in TAP, the tests are
considered as the same ones.

Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST
env var, and have a different title.

While at it, use 'basename' to remove the suffix as well instead of
using an extra 'sed'.

Fixes: c4192967e6 ("selftests: mptcp: lib: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-7-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:38 -08:00
Matthieu Baerts (NGI0)
5e2f3c65af selftests: mptcp: decrease BW in simult flows
When running the simult_flow selftest in slow environments -- e.g. QEmu
without KVM support --, the results can be unstable. This selftest
checks if the aggregated bandwidth is (almost) fully used as expected.

To help improving the stability while still keeping the same validation
in place, the BW and the delay are reduced to lower the pressure on the
CPU.

Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Fixes: 219d04992b ("mptcp: push pending frames when subflow has free space")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:37 -08:00
Matthieu Baerts (NGI0)
4d4dfb2019 selftests: mptcp: increase timeout to 30 min
On very slow environments -- e.g. when QEmu is used without KVM --,
mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the
default timeout by 50% as it seems normal to take that long on some
environments.

When a debug kernel config is used, this selftest will take even longer,
but that's certainly not a common test env to consider for the timeout.

The Fixes tag that has been picked here is there simply to help having
this patch backported to older stable versions. It is difficult to point
to the exact commit that made some env reaching the timeout from time to
time.

Fixes: d17b968b98 ("selftests: mptcp: increase timeout to 20 minutes")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-5-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:37 -08:00
Matthieu Baerts (NGI0)
2d41f10fa4 selftests: mptcp: add missing kconfig for NF Mangle
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Mangle table, only in IPv4.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: b6e074e171 ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-4-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:37 -08:00
Matthieu Baerts (NGI0)
8c86fad2ce selftests: mptcp: add missing kconfig for NF Filter in v6
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table for IPv6.

It is then required to have IP6_NF_FILTER KConfig.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: 523514ed0a ("selftests: mptcp: add ADD_ADDR IPv6 test cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-3-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:37 -08:00
Matthieu Baerts (NGI0)
3645c84490 selftests: mptcp: add missing kconfig for NF Filter
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table.

It is then required to have IP_NF_FILTER KConfig.

This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.

Fixes: 8d014eaa92 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:37 -08:00
Paolo Abeni
b6c620dc43 mptcp: fix data re-injection from stale subflow
When the MPTCP PM detects that a subflow is stale, all the packet
scheduler must re-inject all the mptcp-level unacked data. To avoid
acquiring unneeded locks, it first try to check if any unacked data
is present at all in the RTX queue, but such check is currently
broken, as it uses TCP-specific helper on an MPTCP socket.

Funnily enough fuzzers and static checkers are happy, as the accessed
memory still belongs to the mptcp_sock struct, and even from a
functional perspective the recovery completed successfully, as
the short-cut test always failed.

A recent unrelated TCP change - commit d5fed5addb ("tcp: reorganize
tcp_sock fast path variables") - exposed the issue, as the tcp field
reorganization makes the mptcp code always skip the re-inection.

Fix the issue dropping the bogus call: we are on a slow path, the early
optimization proved once again to be evil.

Fixes: 1e1d9d6f11 ("mptcp: handle pending data on closed subflow")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/468
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-1-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 09:06:37 -08:00
Vitaly Kuznetsov
9e62797fd7 KVM: x86: Make gtod_is_based_on_tsc() return 'bool'
gtod_is_based_on_tsc() is boolean in nature, i.e. it returns '1' for good
clocksources and '0' otherwise. Moreover, its result is used raw by
kvm_get_time_and_clockread()/kvm_get_walltime_and_clockread() which are
'bool'.

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-6-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 08:58:16 -08:00
Vitaly Kuznetsov
b6831a108b KVM: selftests: Make hyperv_clock require TSC based system clocksource
KVM sets up Hyper-V TSC page clocksource for its guests when system
clocksource is 'based on TSC' (see gtod_is_based_on_tsc()), running
hyperv_clock with any other clocksource leads to imminent failure.

Add the missing requirement to make the test skip gracefully.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-5-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 08:58:15 -08:00
Vitaly Kuznetsov
09951bf2cb KVM: selftests: Run clocksource dependent tests with hyperv_clocksource_tsc_page too
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 08:58:14 -08:00
Vitaly Kuznetsov
410cb01ead KVM: selftests: Use generic sys_clocksource_is_tsc() in vmx_nested_tsc_scaling_test
Despite its name, system_has_stable_tsc() just checks that system
clocksource is 'tsc'; this can now be done with generic
sys_clocksource_is_tsc().

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 08:58:13 -08:00
Vitaly Kuznetsov
e440c5f2e3 KVM: selftests: Generalize check_clocksource() from kvm_clock_test
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-01 08:58:13 -08:00
Steven Rostedt (Google)
ca185770db eventfs: Keep all directory links at 1
The directory link count in eventfs was somewhat bogus. It was only being
updated when a directory child was being looked up and not on creation.

One solution would be to update in get_attr() the link count by iterating
the ei->children list and then adding 2. But that could slow down simple
stat() calls, especially if it's done on all directories in eventfs.

Another solution would be to add a parent pointer to the eventfs_inode
and keep track of the number of sub directories it has on creation. But
this adds overhead for something not really worthwhile.

The solution decided upon is to keep all directory links in eventfs as 1.
This tells user space not to rely on the hard links of directories. Which
in this case it shouldn't.

Link: https://lore.kernel.org/linux-trace-kernel/20240201002719.GS2087318@ZenIV/
Link: https://lore.kernel.org/linux-trace-kernel/20240201161617.339968298@goodmis.org

Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Fixes: c1504e5102 ("eventfs: Implement eventfs dir creation functions")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-02-01 11:53:53 -05:00
Steven Rostedt (Google)
12d823b31f eventfs: Remove fsnotify*() functions from lookup()
The dentries and inodes are created when referenced in the lookup code.
There's no reason to call fsnotify_*() functions when they are created by
a reference. It doesn't make any sense.

Link: https://lore.kernel.org/linux-trace-kernel/20240201002719.GS2087318@ZenIV/
Link: https://lore.kernel.org/linux-trace-kernel/20240201161617.166973329@goodmis.org

Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Fixes: a376007917 ("eventfs: Implement functions to create files and dirs when accessed");
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-02-01 11:53:53 -05:00
Steven Rostedt (Google)
264424dfdd eventfs: Restructure eventfs_inode structure to be more condensed
Some of the eventfs_inode structure has holes in it. Rework the structure
to be a bit more condensed, and also remove the no longer used llist
field.

Link: https://lore.kernel.org/linux-trace-kernel/20240201161617.002321438@goodmis.org

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-02-01 11:53:52 -05:00
Steven Rostedt (Google)
5a49f99604 eventfs: Warn if an eventfs_inode is freed without is_freed being set
There should never be a case where an evenfs_inode is being freed without
is_freed being set. Add a WARN_ON_ONCE() if it ever happens. That would
mean there was one too many put_ei()s.

Link: https://lore.kernel.org/linux-trace-kernel/20240201161616.843551963@goodmis.org

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-02-01 11:53:52 -05:00
Daniel Bristot de Oliveira
1389358bb0 tracing/timerlat: Move hrtimer_init to timerlat_fd open()
Currently, the timerlat's hrtimer is initialized at the first read of
timerlat_fd, and destroyed at close(). It works, but it causes an error
if the user program open() and close() the file without reading.

Here's an example:

 # echo NO_OSNOISE_WORKLOAD > /sys/kernel/debug/tracing/osnoise/options
 # echo timerlat > /sys/kernel/debug/tracing/current_tracer

 # cat <<EOF > ./timerlat_load.py
 # !/usr/bin/env python3

 timerlat_fd = open("/sys/kernel/tracing/osnoise/per_cpu/cpu0/timerlat_fd", 'r')
 timerlat_fd.close();
 EOF

 # ./taskset -c 0 ./timerlat_load.py
<BOOM>

 BUG: kernel NULL pointer dereference, address: 0000000000000010
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 1 PID: 2673 Comm: python3 Not tainted 6.6.13-200.fc39.x86_64 #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014
 RIP: 0010:hrtimer_active+0xd/0x50
 Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 57 30 <8b> 42 10 a8 01 74 09 f3 90 8b 42 10 a8 01 75 f7 80 7f 38 00 75 1d
 RSP: 0018:ffffb031009b7e10 EFLAGS: 00010286
 RAX: 000000000002db00 RBX: ffff9118f786db08 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff9117a0e64400 RDI: ffff9118f786db08
 RBP: ffff9118f786db80 R08: ffff9117a0ddd420 R09: ffff9117804d4f70
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9118f786db08
 R13: ffff91178fdd5e20 R14: ffff9117840978c0 R15: 0000000000000000
 FS:  00007f2ffbab1740(0000) GS:ffff9118f7840000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000010 CR3: 00000001b402e000 CR4: 0000000000750ee0
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __die+0x23/0x70
  ? page_fault_oops+0x171/0x4e0
  ? srso_alias_return_thunk+0x5/0x7f
  ? avc_has_extended_perms+0x237/0x520
  ? exc_page_fault+0x7f/0x180
  ? asm_exc_page_fault+0x26/0x30
  ? hrtimer_active+0xd/0x50
  hrtimer_cancel+0x15/0x40
  timerlat_fd_release+0x48/0xe0
  __fput+0xf5/0x290
  __x64_sys_close+0x3d/0x80
  do_syscall_64+0x60/0x90
  ? srso_alias_return_thunk+0x5/0x7f
  ? __x64_sys_ioctl+0x72/0xd0
  ? srso_alias_return_thunk+0x5/0x7f
  ? syscall_exit_to_user_mode+0x2b/0x40
  ? srso_alias_return_thunk+0x5/0x7f
  ? do_syscall_64+0x6c/0x90
  ? srso_alias_return_thunk+0x5/0x7f
  ? exit_to_user_mode_prepare+0x142/0x1f0
  ? srso_alias_return_thunk+0x5/0x7f
  ? syscall_exit_to_user_mode+0x2b/0x40
  ? srso_alias_return_thunk+0x5/0x7f
  ? do_syscall_64+0x6c/0x90
  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
 RIP: 0033:0x7f2ffb321594
 Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 cd 0d 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 7d
 RSP: 002b:00007ffe8d8eef18 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
 RAX: ffffffffffffffda RBX: 00007f2ffba4e668 RCX: 00007f2ffb321594
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
 RBP: 00007ffe8d8eef40 R08: 0000000000000000 R09: 0000000000000000
 R10: 55c926e3167eae79 R11: 0000000000000202 R12: 0000000000000003
 R13: 00007ffe8d8ef030 R14: 0000000000000000 R15: 00007f2ffba4e668
  </TASK>
 CR2: 0000000000000010
 ---[ end trace 0000000000000000 ]---

Move hrtimer_init to timerlat_fd open() to avoid this problem.

Link: https://lore.kernel.org/linux-trace-kernel/7324dd3fc0035658c99b825204a66049389c56e3.1706798888.git.bristot@kernel.org

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Fixes: e88ed227f6 ("tracing/timerlat: Add user-space interface")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-02-01 11:50:13 -05:00
Paolo Abeni
c15a729c9d selftests: net: enable some more knobs
The rtnetlink tests require additional options currently
off by default.

Fixes: 2766a11161 ("selftests: rtnetlink: add ipsec offload API test")
Fixes: 5e596ee171 ("selftests: add xfrm state-policy-monitor to rtnetlink.sh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/9048ca58e49b962f35dba1dfb2beaf3dab3e0411.1706723341.git.pabeni@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:45:16 -08:00
Jakub Kicinski
1939f738c7 selftests: net: add missing config for NF_TARGET_TTL
amt test uses the TTL iptables module:

  ip netns exec "${RELAY}" iptables -t mangle -I PREROUTING \
  	-d 239.0.0.1 -j TTL --ttl-set 2

Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Link: https://lore.kernel.org/r/20240131165605.4051645-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:38:04 -08:00
Jakub Kicinski
cf6601e289 Merge branch 'selftests-net-more-small-fixes'
Benjamin Poirier says:

====================
selftests: net: More small fixes

Some small fixes for net selftests which follow from these recent commits:
dd2d40acdb ("selftests: bonding: Add more missing config options")
49078c1b80 ("selftests: forwarding: Remove executable bits from lib.sh")
====================

Link: https://lore.kernel.org/r/20240131140848.360618-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:36:40 -08:00
Benjamin Poirier
96cd5ac4c0 selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Currently they are incorrectly listed
in TEST_PROGS_EXTENDED so rename the variable.

Fixes: c085dbfb1c ("selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-6-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:36:36 -08:00
Benjamin Poirier
06efafd860 selftests: net: List helper scripts in TEST_FILES Makefile variable
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Move those utility scripts to
TEST_FILES.

Fixes: 1751eb42dd ("selftests: net: use TEST_PROGS_EXTENDED")
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Fixes: b99ac18411 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile")
Fixes: f5173fe3e1 ("selftests: net: included needed helper in the install targets")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-5-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:36:32 -08:00
Benjamin Poirier
9d851dd4da selftests: net: Remove executable bits from library scripts
setup_loopback.sh and net_helper.sh are meant to be sourced from other
scripts, not executed directly. Therefore, remove the executable bits from
those files' permissions.

This change is similar to commit 49078c1b80 ("selftests: forwarding:
Remove executable bits from lib.sh")

Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:36:29 -08:00
Benjamin Poirier
8cc063ae1b selftests: bonding: Check initial state
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.

Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.

I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:

tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp                                        [ OK ]

Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:36:24 -08:00
Benjamin Poirier
7b6fb3050d selftests: team: Add missing config options
Similar to commit dd2d40acdb ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.

For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.

Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:36:20 -08:00
Souradeep Chakrabarti
e0526ec536 hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
In commit ac50476717 ("hv_netvsc: Disable NAPI before closing the
VMBus channel"), napi_disable was getting called for all channels,
including all subchannels without confirming if they are enabled or not.

This caused hv_netvsc getting hung at napi_disable, when netvsc_probe()
has finished running but nvdev->subchan_work has not started yet.
netvsc_subchan_work() -> rndis_set_subchannel() has not created the
sub-channels and because of that netvsc_sc_open() is not running.
netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which
netvsc_subchan_work did not run.

netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI
cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the
NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the
opposite.

Now during netvsc_device_remove(), when napi_disable is called for those
subchannels, napi_disable gets stuck on infinite msleep.

This fix addresses this problem by ensuring that napi_disable() is not
getting called for non-enabled NAPI struct.
But netif_napi_del() is still necessary for these non-enabled NAPI struct
for cleanup purpose.

Call trace:
[  654.559417] task:modprobe        state:D stack:    0 pid: 2321 ppid:  1091 flags:0x00004002
[  654.568030] Call Trace:
[  654.571221]  <TASK>
[  654.573790]  __schedule+0x2d6/0x960
[  654.577733]  schedule+0x69/0xf0
[  654.581214]  schedule_timeout+0x87/0x140
[  654.585463]  ? __bpf_trace_tick_stop+0x20/0x20
[  654.590291]  msleep+0x2d/0x40
[  654.593625]  napi_disable+0x2b/0x80
[  654.597437]  netvsc_device_remove+0x8a/0x1f0 [hv_netvsc]
[  654.603935]  rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc]
[  654.611101]  ? do_wait_intr+0xb0/0xb0
[  654.615753]  netvsc_remove+0x7c/0x120 [hv_netvsc]
[  654.621675]  vmbus_remove+0x27/0x40 [hv_vmbus]

Cc: stable@vger.kernel.org
Fixes: ac50476717 ("hv_netvsc: Disable NAPI before closing the VMBus channel")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:33:43 -08:00
Jan Beulich
7b55984c96 xen-netback: properly sync TX responses
Invoking the make_tx_response() / push_tx_responses() pair with no lock
held would be acceptable only if all such invocations happened from the
same context (NAPI instance or dealloc thread). Since this isn't the
case, and since the interface "spec" also doesn't demand that multicast
operations may only be performed with no in-flight transmits,
MCAST_{ADD,DEL} processing also needs to acquire the response lock
around the invocations.

To prevent similar mistakes going forward, "downgrade" the present
functions to private helpers of just the two remaining ones using them
directly, with no forward declarations anymore. This involves renaming
what so far was make_tx_response(), for the new function of that name
to serve the new (wrapper) purpose.

While there,
- constify the txp parameters,
- correct xenvif_idx_release()'s status parameter's type,
- rename {,_}make_tx_response()'s status parameters for consistency with
  xenvif_idx_release()'s.

Fixes: 210c34dcd8 ("xen-netback: add support for multicast control")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 08:29:36 -08:00