When inetdev_valid_mtu fails, cork->opt should be freed if it is
allocated in ip_setup_cork. Otherwise there could be a memleak.
Fixes: 501a90c945 ("inet: protect against too small mtu values.")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240129091017.2938835-1-alexious@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bhupesh's email responds indicating they've changed employers and with
no new contact information. Let's drop the line from MAINTAINERS to
avoid getting the same response over and over.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240129-remove-dwmac-qcom-ethqos-reviewer-v1-1-2645eab61451@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Note, KMEM_CACHE() uses the required alignment of the struct, '8' as the
alignment, whereas KVM's existing code passes '0'. In the end, the two
values yield the same result as x86's minimum slab alignment is also '8'
(which is not at all coincidental).
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240116100025.95702-1-chentao@kylinos.cn
[sean: call out alignment behavior]
Signed-off-by: Sean Christopherson <seanjc@google.com>
lan743x_ptp_request_tx_timestamp uses spin_lock_bh, but it is
only called from lan743x_tx_xmit_frame where all IRQs are
already disabled.
This fixes the "IRQs not enabled as expected" warning.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Link: https://lore.kernel.org/r/20240128101849.107298-1-tanure@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following a successful cifs_tree_connect, we have the code
to scale up/down the number of channels in the session.
However, it is not protected by a lock today.
As a result, this code can be executed by several processes
that select the same channel. The core functions handle this
well, as they pick chan_lock. However, we've seen cases where
smb2_reconnect throws some warnings.
To fix that, this change introduces a flags bitmap inside the
cifs_ses structure. A new flag type is used to ensure that
only one process enters this section at any time.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Allows us to detect subsequent IH ring buffer overflows as well.
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no irq enabled in vcn 4.0.5 resume, causing wrong amdgpu_irq_src status.
Beside, current set function callbacks are empty with no real effect.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to set GC golden settings in driver from gfx 11.5.0 onwards.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the
code is trying to access an element of the dc->links array that is
beyond its bounds. In C, arrays are zero-indexed, so an array with 12
elements has valid indices from 0 to 11. Trying to access dc->links[12]
would be an attempt to access the 13th element of a 12-element array,
which is a buffer overflow.
To fix this, ensure that the loop does not go beyond the last valid
index when accessing dc->links[i + 1] by subtracting 1 from the loop
condition.
This would ensure that i + 1 is always a valid index in the array.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12
Fixes: 59f1622a5f ("drm/amd/display: Add dpia display mode validation logic")
Cc: PeiChen Huang <peichen.huang@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a NULL check for the kzalloc call that allocates memory for
dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously,
if kzalloc failed to allocate memory and returned NULL, the code would
attempt to use the NULL pointer.
The fix is to check if kzalloc returns NULL, and if so, log an error
message and skip the rest of the current loop iteration with the
continue statement. This prevents the code from attempting to use the
NULL pointer.
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202401300629.ICnCt983-lkp@intel.com/
Fixes: 135fd1b356 ("drm/amd/display: Reduce stack size")
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same calls are made directly above, but conditional on the firmware
loading and validating successfully.
Cc: stable@vger.kernel.org
Fixes: 9931b67690 ("drm/amd: Load GFX10 microcode during early_init")
Signed-off-by: David McFarland <corngood@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the warning info below during mode1 reset.
[ +0.000004] Call Trace:
[ +0.000004] <TASK>
[ +0.000006] ? show_regs+0x6e/0x80
[ +0.000011] ? __flush_work.isra.0+0x2e8/0x390
[ +0.000005] ? __warn+0x91/0x150
[ +0.000009] ? __flush_work.isra.0+0x2e8/0x390
[ +0.000006] ? report_bug+0x19d/0x1b0
[ +0.000013] ? handle_bug+0x46/0x80
[ +0.000012] ? exc_invalid_op+0x1d/0x80
[ +0.000011] ? asm_exc_invalid_op+0x1f/0x30
[ +0.000014] ? __flush_work.isra.0+0x2e8/0x390
[ +0.000007] ? __flush_work.isra.0+0x208/0x390
[ +0.000007] ? _prb_read_valid+0x216/0x290
[ +0.000008] __cancel_work_timer+0x11d/0x1a0
[ +0.000007] ? try_to_grab_pending+0xe8/0x190
[ +0.000012] cancel_work_sync+0x14/0x20
[ +0.000008] amddrm_sched_stop+0x3c/0x1d0 [amd_sched]
[ +0.000032] amdgpu_device_gpu_recover+0x29a/0xe90 [amdgpu]
This warning info was printed after applying the patch
"drm/sched: Convert drm scheduler to use a work queue rather than kthread".
The root cause is that amdgpu driver tries to use the uninitialized
work_struct in the struct drm_gpu_scheduler
v2:
- Rename the function to amdgpu_ring_sched_ready and move it to
amdgpu_ring.c (Alex)
v3:
- Fix a few more checks based on Vitaly's patch (Alex)
v4:
- squash in fix noticed by Bert in
https://gitlab.freedesktop.org/drm/amd/-/issues/3139
Fixes: 11b3b9f461 ("drm/sched: Check scheduler ready before calling timeout handling")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.
[how]
Add the odm calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On 14us for exit latency time causes underflow for 8K monitor with HDR on.
Increasing the latency to 28us fixes the underflow.
[How]
Increase the latency to 28us. This workaround should be sufficient
before we figure out why SR exit so long.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
MAX_SURFACES is per stream, while MAX_PLANES is per asic. The
mpc_combine is an array that records all the planes per asic. Therefore
MAX_PLANES should be used as the array size. Using MAX_SURFACES causes
array overflow when there are more than 3 planes.
[how]
Use the MAX_PLANES for the mpc_combine array size.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Secondary DP2 display fails to light up in some instances
[How]
Clock needs to be on when DPSTREAMCLK*_EN =1. This change
moves dtbclk_p enable/disable point to make sure this is
the case
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
BIOS's integration info table not following the original order
which is phy instance is ext_displaypath's array index.
[how]
Move them to follow the original order.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased
to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware
requirement will still be satisfied. Increasing min DCFCLK addresses
underflow issues (underflow occurs when phantom pipe is turned on for some
Sub-Viewport configs).
[how]
Increasing DCFCLK by raising the min_dcfclk_mhz
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit 885c71ad79
("drm/amd/display: initialize all the dpm level's stutter latency")
Because it causes some regression
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX 9.4.3, for a given KFD node, fetch the correct drm device from
XCP manager when checking for cgroup permissions.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This instruction has no functional difference to S_ENDPGM
but allows performance counters to track save events correctly.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Partial migration to system memory should use migrate.addr, not
prange->start as virtual address to allocate system memory page.
Fixes: a546a27684 ("drm/amdkfd: Use partial migrations/mapping for GPU/CPU page faults in SVM")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Disallow families other than NFPROTO_{IPV4,IPV6,INET}.
- Disallow layer 4 protocol with no ports, since destination port is a
mandatory attribute for this object.
Fixes: 857b46027d ("netfilter: nft_ct: add ct expectations support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Module reference is bumped for each user, this should not ever happen.
But BUG_ON check should use rcu_access_pointer() instead.
If this ever happens, do WARN_ON_ONCE() instead of BUG_ON() and
consolidate pointer check under the rcu read side lock section.
Fixes: fab4085f4e ("netfilter: log: nf_log_packet() as real unified interface")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The patch "netfilter: ipset: fix race condition between swap/destroy
and kernel side add/del/test", commit 28628fa9 fixes a race condition.
But the synchronize_rcu() added to the swap function unnecessarily slows
it down: it can safely be moved to destroy and use call_rcu() instead.
Eric Dumazet pointed out that simply calling the destroy functions as
rcu callback does not work: sets with timeout use garbage collectors
which need cancelling at destroy which can wait. Therefore the destroy
functions are split into two: cancelling garbage collectors safely at
executing the command received by netlink and moving the remaining
part only into the rcu callback.
Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/
Fixes: 28628fa952 ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test")
Reported-by: Ale Crismani <ale.crismani@automattic.com>
Reported-by: David Wang <00107082@163.com>
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The annotation says in sctp_new(): "If it is a shutdown ack OOTB packet, we
expect a return shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8)".
However, it does not check SCTP_CID_SHUTDOWN_ACK before setting vtag[REPLY]
in the conntrack entry(ct).
Because of that, if the ct in Router disappears for some reason in [1]
with the packet sequence like below:
Client > Server: sctp (1) [INIT] [init tag: 3201533963]
Server > Client: sctp (1) [INIT ACK] [init tag: 972498433]
Client > Server: sctp (1) [COOKIE ECHO]
Server > Client: sctp (1) [COOKIE ACK]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057809]
Server > Client: sctp (1) [SACK] [cum ack 3075057809]
Server > Client: sctp (1) [HB REQ]
(the ct in Router disappears somehow) <-------- [1]
Client > Server: sctp (1) [HB ACK]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [HB REQ]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [HB REQ]
Client > Server: sctp (1) [ABORT]
when processing HB ACK packet in Router it calls sctp_new() to initialize
the new ct with vtag[REPLY] set to HB_ACK packet's vtag.
Later when sending DATA from Client, all the SACKs from Server will get
dropped in Router, as the SACK packet's vtag does not match vtag[REPLY]
in the ct. The worst thing is the vtag in this ct will never get fixed
by the upcoming packets from Server.
This patch fixes it by checking SCTP_CID_SHUTDOWN_ACK before setting
vtag[REPLY] in the ct in sctp_new() as the annotation says. With this
fix, it will leave vtag[REPLY] in ct to 0 in the case above, and the
next HB REQ/ACK from Server is able to fix the vtag as its value is 0
in nf_conntrack_sctp_packet().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In (e)poll mode, threads often depend on I/O events to determine when
data is ready for consumption. Within binder, a thread may initiate a
command via BINDER_WRITE_READ without a read buffer and then make use
of epoll_wait() or similar to consume any responses afterwards.
It is then crucial that epoll threads are signaled via wakeup when they
queue their own work. Otherwise, they risk waiting indefinitely for an
event leaving their work unhandled. What is worse, subsequent commands
won't trigger a wakeup either as the thread has pending work.
Fixes: 457b9a6f09 ("Staging: android: add binder driver")
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Steven Moreland <smoreland@google.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bail out on using the tunnel dst template from other than netdev family.
Add the infrastructure to check for the family in objects.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit c7aab4f170 ("netfilter: nf_conntrack_tcp: re-init for syn packets
only") introduces a bug where SYNs in ORIGINAL direction on reused 5-tuple
result in incorrect window scale negotiation. This commit merged the SYN
re-initialization and simultaneous open or SYN retransmits cases. Merging
this block added the logic in tcp_init_sender() that performed window scale
negotiation to the retransmitted syn case. Previously. this would only
result in updating the sender's scale and flags. After the merge the
additional logic results in improperly clearing the scale in ORIGINAL
direction before any packets in the REPLY direction are received. This
results in packets incorrectly being marked invalid for being
out-of-window.
This can be reproduced with the following trace:
Packet Sequence:
> Flags [S], seq 1687765604, win 62727, options [.. wscale 7], length 0
> Flags [S], seq 1944817196, win 62727, options [.. wscale 7], length 0
In order to fix the issue, only evaluate window negotiation for packets
in the REPLY direction. This was tested with simultaneous open, fast
open, and the above reproduction.
Fixes: c7aab4f170 ("netfilter: nf_conntrack_tcp: re-init for syn packets only")
Signed-off-by: Ryan Schaefer <ryanschf@amazon.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert the generic fpga region DT binding to json-schema.
There are some differences compare to txt version.
1. DT overlay can't be described in example that's why directly include
information from overlay to node which was referenced. It is visible in
example with /* DT Overlay contains: &... */
2. All example have been rewritten to be simpler and describe only full
reconfiguration and partial reconfiguration with one bridge.
Completely drop the case where fpga region can inside partial
reconfiguration region which is already described in description
3. Fixed some typos in descriptions compare to txt version but most of it
is just c&p from txt file.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/37b107d86b39ef4bc9c482b57b27de8b92c3fa43.1706530726.git.michal.simek@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
I never really implemented any filtering on the "+dt" sub-address, so
drop it.
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for I2C
Link: https://lore.kernel.org/r/20240122211528.1719994-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Frank retired a while back and surprisingly has found better things to
do than DT maintainership. Thank you Frank for all of your help with DT
for many years.
Link: https://lore.kernel.org/r/20240122211501.1719374-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
If CONFIG_OF_KOBJ is not set, a device_node does not contain a
kobj and attempts to access the embedded kobj via kref_read break
the compile.
Replace affected kref_read calls with a macro that reads the
refcount if it exists and returns 1 if there is no embedded kobj.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401291740.VP219WIz-lkp@intel.com/
Fixes: 4dde835698 ("of: Fix double free in of_parse_phandle_with_args_map")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20240129192556.403271-1-lk@c--e.de
Signed-off-by: Rob Herring <robh@kernel.org>
This is cosmetics. Move the call of xa_erase() in dpll_pin_put()
so the order of cleanup calls matches the error path of
dpll_pin_alloc().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20240130155814.268622-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function sev_map_percpu_data() checks if it is running on an SEV
platform by checking the CC_ATTR_GUEST_MEM_ENCRYPT attribute. However,
this attribute is also defined for TDX.
To avoid false positives, add a cc_vendor check.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 4d96f91091 ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()")
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: David Rientjes <rientjes@google.com>
Message-Id: <20240124130317.495519-1-kirill.shutemov@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit b0563468ee ("x86/CPU/AMD: Disable XSAVES on AMD family 0x17")
kernel unconditionally clears the XSAVES CPU feature bit on Zen1/2 CPUs.
Because KVM CPU caps are initialized from the kernel boot CPU features this
makes the XSAVES feature also unavailable for KVM guests in this case.
At the same time the XSAVEC feature is left enabled.
Unfortunately, having XSAVEC but no XSAVES in CPUID breaks Hyper-V enabled
Windows Server 2016 VMs that have more than one vCPU.
Let's at least give users hint in the kernel log what could be wrong since
these VMs currently simply hang at boot with a black screen - giving no
clue what suddenly broke them and how to make them work again.
Trigger the kernel message hint based on the particular guest ID written to
the Guest OS Identity Hyper-V MSR implemented by KVM.
Defer this check to when the L1 Hyper-V hypervisor enables SVM in EFER
since we want to limit this message to Hyper-V enabled Windows guests only
(Windows session running nested as L2) but the actual Guest OS Identity MSR
write is done by L1 and happens before it enables SVM.
Fixes: b0563468ee ("x86/CPU/AMD: Disable XSAVES on AMD family 0x17")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <b83ab45c5e239e5d148b0ae7750133a67ac9575c.1706127425.git.maciej.szmigiero@oracle.com>
[Move some checks before mutex_lock(), rename function. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the kvm api(https://docs.kernel.org/virt/kvm/api.html) reads,
KVM_CREATE_PIT2 call is only valid after enabling in-kernel irqchip
support via KVM_CREATE_IRQCHIP.
Without this check, I can create PIT first and enable irqchip-split
then, which may cause the PIT invalid because of lacking of in-kernel
PIC to inject the interrupt.
Signed-off-by: Tengfei Yu <moehanabichan@gmail.com>
Message-Id: <20240125050823.4893-1-moehanabichan@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some Timer Unit (TMU) instances with 3 channels support a fourth
interrupt: an input capture interrupt for the third channel.
While at it, document the meaning of the four interrupts, and add
"interrupt-names" for clarity.
Update the example to match reality.
Inspired by a patch by Yoshinori Sato for SH.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/8cb38b5236213a467c6c0073f97ccc4bfd5a39ff.1706717378.git.geert+renesas@glider.be
The Keystone platforms used their own keystone_defconfig mostly to
enable CONFIG_ARM_LPAE which could not be added to the multi_v7 config.
Now that we have multi_v7_lpae_defconfig/lpae.config target we can and
should use that defconfig for Keystone. Add the remaining must-have
options for Keystone support to multi_v7_defconfig.
TI_SCI_*:
TI_MESSAGE_MANAGER:
Allows TI-SCI communication with system control firmware (PMMC) on K2G.
TI_KEYSTONE_NETCP*:
KEYSTONE_NAVIGATOR*:
Network driver, needed for NFS boot.
PCI_KEYSTONE*:
CAN_C_CAN*:
INPUT_GPIO_DECODER:
SPI_CADENCE_QUADSPI:
PWM_TIECAP:
Miscellaneous on-chip peripherals. Added as modules where possible.
RESET_TI*:
Used by DSP Remoteproc driver.
bloat-o-meter:
add/remove: 387/0 grow/shrink: 6/0 up/down: 130945/0 (130945)
Total: Before=22791863, After=22922808, chg +0.57%
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Let cpu_init_exception_handling() call cpu_init_fred_exceptions() to
initialize FRED. However if FRED is unavailable or disabled, it falls
back to set up TSS IST and initialize IDT.
Co-developed-by: Xin Li <xin3.li@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-36-xin3.li@intel.com
Add cpu_init_fred_exceptions() to:
- Set FRED entrypoints for events happening in ring 0 and 3.
- Specify the stack level for IRQs occurred ring 0.
- Specify dedicated event stacks for #DB/NMI/#MCE/#DF.
- Enable FRED and invalidtes IDT.
- Force 32-bit system calls to use "int $0x80" only.
Add fred_complete_exception_setup() to:
- Initialize system_vectors as done for IDT systems.
- Set unused sysvec_table entries to fred_handle_spurious_interrupt().
Co-developed-by: Xin Li <xin3.li@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-35-xin3.li@intel.com
Because FRED uses the ring 3 FRED entrypoint for SYSCALL and SYSENTER and
ERETU is the only legit instruction to return to ring 3, there is NO need
to setup SYSCALL and SYSENTER MSRs for FRED, except the IA32_STAR MSR.
Split IDT syscall setup code into idt_syscall_init() to make it easy to
skip syscall setup code when FRED is enabled.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-34-xin3.li@intel.com
When FRED is enabled, call fred_entry_from_kvm() to handle IRQ/NMI in
IRQ/NMI induced VM exits.
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231205105030.8698-33-xin3.li@intel.com
In IRQ/NMI induced VM exits, KVM VMX needs to execute the respective
handlers, which requires the software to create a FRED stack frame,
and use it to invoke the handlers. Add fred_irq_entry_from_kvm() for
this job.
Export fred_entry_from_kvm() because VMX can be compiled as a module.
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-32-xin3.li@intel.com
PUSH_AND_CLEAR_REGS could be used besides actual entry code; in that case
%rbp shouldn't be cleared (otherwise the frame pointer is destroyed) and
UNWIND_HINT shouldn't be added.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-31-xin3.li@intel.com
If the stack frame contains an invalid user context (e.g. due to invalid SS,
a non-canonical RIP, etc.) the ERETU instruction will trap (#SS or #GP).
From a Linux point of view, this really should be considered a user space
failure, so use the standard fault fixup mechanism to intercept the fault,
fix up the exception frame, and redirect execution to fred_entrypoint_user.
The end result is that it appears just as if the hardware had taken the
exception immediately after completing the transition to user space.
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-30-xin3.li@intel.com
Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled,
otherwise the existing IDT code is chosen.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-29-xin3.li@intel.com
Add sysvec_install() to install a system interrupt handler into the IDT
or the FRED system interrupt handler table.
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-28-xin3.li@intel.com