The SA8295P and SA8540P uses an external regulator (max20411), and
gfx.lvl is not provided by rpmh. Drop the power-domains property of the
gpucc node to reflect this.
Fixes: eec51ab2fd ("arm64: dts: qcom: sc8280xp: Add GPU related nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-5-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the description of @memory_type to silence the warning:
drivers/firmware/efi/libstub/alignedmem.c:27: warning: Function parameter or struct member 'memory_type' not described in 'efi_allocate_pages_aligned'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ardb: tweak comment]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI stub's kernel placement logic randomizes the physical placement
of the kernel by taking all available memory into account, and picking a
region at random, based on a random seed.
When KASLR is disabled, this seed is set to 0x0, and this results in the
lowest available region of memory to be selected for loading the kernel,
even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is
typically reserved for the GFP_DMA region, to accommodate masters that
can only access the first 16 MiB of system memory.
Even if such devices are rare these days, we may still end up with a
warning in the kernel log, as reported by Tom:
swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
Fix this by tweaking the random allocation logic to accept a low bound
on the placement, and set it to LOAD_PHYSICAL_ADDR.
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Reported-by: Tom Englund <tomenglund26@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218404
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
On SA8295P and SA8540P gfx.lvl is not provdied by rpmh, but rather is
handled by an external regulator (max20411). Drop gfx.lvl from the list
of power-domains exposed on this platform.
Fixes: f68f1cb343 ("soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-4-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
open_path_or_exit() is used for '/dev/kvm', '/dev/sev', and
'/sys/module/%s/parameters/%s' and skipping test when the entry is missing
is completely reasonable. Other errors, however, may indicate a real issue
which is easy to miss. E.g. when 'hyperv_features' test was entering an
infinite loop the output was:
./hyperv_features
Testing access to Hyper-V specific MSRs
1..0 # SKIP - /dev/kvm not available (errno: 24)
and this can easily get overlooked.
Keep ENOENT case 'special' for skipping tests and fail when open() results
in any other errno.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When X86_FEATURE_INVTSC is missing, guest_test_msrs_access() was supposed
to skip testing dependent Hyper-V invariant TSC feature. Unfortunately,
'continue' does not lead to that as stage is not incremented. Moreover,
'vm' allocated with vm_create_with_one_vcpu() is not freed and the test
runs out of available file descriptors very quickly.
Fixes: bd827bd775 ("KVM: selftests: Test Hyper-V invariant TSC control")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Delete the AMX's tests "stage" counter, as the counter is no longer used,
which makes clang unhappy:
x86_64/amx_test.c:224:6: error: variable 'stage' set but not used
int stage, ret;
^
1 error generated.
Note, "stage" was never really used, it just happened to be dumped out by
a (failed) assertion on run->exit_reason, i.e. the AMX test has no concept
of stages, the code was likely copy+pasted from a different test.
Fixes: c96f57b080 ("KVM: selftests: Make vCPU exit reason test assertion common")
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20240109220302.399296-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To begin with:
- locking/index.rst
- locking/lockdep-design.rst
- locking/lockstat.rst
- locking/lockturture.rst
- locking/locktypes.rst
And RCU/torture.rst to avoid broken references.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240106233820.30454-1-federico.vaga@vaga.pv.it
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231206170241.82801-12-ajones@ventanamicro.com
[sean: keep the newline in the "tsc\n" strncmp()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since 2014 kernel-doc has supported describing object-like macros
but it is not documented anywhere. I should have required some
documentation for it when I merged the patch. :(
There are currently only 3 uses of this (all in DRM headers, in
include/drm/*.h).
Add object-like macro kernel-doc documentation now so that more may
know about it and use it.
Fixes: cbb4d3e651 ("scripts/kernel-doc: handle object-like macros")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240107012400.32587-1-rdunlap@infradead.org
It's good to be clear about who the intended target audience for any
given piece of documentation is, as this will help us put new text in
the correct place. Let's encourage submitters to state it explicitly
rather than relying on where they placed it in the directory hierarchy
as there isn't necessarily a one-to-one correspondence between them.
Target audience: documentation contributors and reviewers.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240111094838.3695697-1-vegard.nossum@oracle.com
To prevent this, do the pre-processing only for lines which are no
comments, e.g. do not start with ' *'.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240122093152.22536-3-anna-maria@linutronix.de
Reformat lines in kernel-doc comments, which make use of the backslash at
the end to suggest it is a multi-line comment. kernel-doc is able to
process e.g. the short description of a function properly, even if it is
across two lines.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240122093152.22536-2-anna-maria@linutronix.de
Those addresses are necessary to Mesa tools knows where in VM are the
batch buffers to parse and print instructions that are human readable.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130135648.30211-2-jose.souza@intel.com
Some instructions requires canonical address like
MI_BATCH_BUFFER_START(UMDs must call xe_exec with a canonical address
for Xe2+).
So here adding functions to convert regular address to canonical
address and back, the first user of this functions will be added
in the next patch.
v3:
- inline removed
- rename highest_address_bit_get() to ppgtt_msb_get()
v4:
- use xe->info.va_bits instead of xe->info.dma_mask_size
BSpec: 47626
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130135648.30211-1-jose.souza@intel.com
This reduces code duplication in xe_ring_ops.
v2:
- fix flags of emit_pipe_imm_ggtt()
- reduce to only one function
v3:
- fix emit_pipe_imm_ggtt() stall_only check
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130132249.8615-1-jose.souza@intel.com
Reduce debug print from warn to debug to avoid unnecessary warning
message in dmesg: the firmware loading logic already has the right
printk priority level when checking the firmware version.
Fixes: c5a06c9169 ("drm/xe/guc: Enable WA 14018913170")
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240125165652.3764711-1-karthik.poosa@intel.com
[ slightly reword debug and commit messages ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In an entirely unrelated discussion where I pointed out a stupid thinko
of mine, Rasmus piped up and noted that that obvious mistake already
existed elsewhere in the kernel tree.
An "error pointer" is the negative error value encoded as a pointer,
making the whole "return error or valid pointer" use-case simple and
straightforward. We use it all over the kernel.
But the key here is that errors are _negative_ error numbers, not the
horrid UNIX user-level model of "-1 and the value of 'errno'".
The Apple mailbox driver used the positive error values, and thus just
returned invalid normal pointers instead of actual errors.
Of course, the reason nobody ever noticed is that the errors presumably
never actually happen, so this is fixing a conceptual bug rather than an
actual one.
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/all/5c30afe0-f9fb-45d5-9333-dd914a1ea93a@prevas.dk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The cleanup can be dispatched while the atomic update is still active,
which means that the memory acquired in the atomic update needs to
not be invalidated by the cleanup. The buffer objects in vmw_plane_state
instead of using the builtin map_and_cache were trying to handle
the lifetime of the mapped memory themselves, leading to crashes.
Use the map_and_cache instead of trying to manage the lifetime of the
buffer objects held by the vmw_plane_state.
Fixes kernel oops'es in IGT's kms_cursor_legacy forked-bo.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: bb6780aa5a ("drm/vmwgfx: Diff cursors when using cmds")
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126200804.732454-6-zack.rusin@broadcom.com
The fencing of MOB creation used in vmw_du_get_cursor_mob was incompatible
with register-based device communication employed by this routine. As a
result cursor MOB creation was racy, leading to potentially broken/missing
mouse cursor on desktops using CursorMob device feature.
Fixes: 53bc3f6fb6 ("drm/vmwgfx: Clean up cursor mobs")
Signed-off-by: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126200804.732454-5-zack.rusin@broadcom.com
There is no real need to have a separate pool for shareable and
non-shareable surfaces. Make all surfaces shareable, regardless of whether
the drm_vmw_surface_flag_shareable has been specified.
Signed-off-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126200804.732454-3-zack.rusin@broadcom.com
The function kvmalloc_node limits the allocation size to INT_MAX. This
limit will be overflowed if dm-writecache attempts to map a device with
1TiB or larger length. This commit changes kvmalloc_array to vmalloc_array
to avoid the limit.
The commit also changes vmalloc(array_size()) to vmalloc_array().
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The kvmalloc function fails with a warning if the size is larger than
INT_MAX. Linus said that there should be limits that prevent this warning
from being hit. This commit adds the limits to the dm-stats subsystem
in DM core.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The kvmalloc function fails with a warning if the size is larger than
INT_MAX. The warning was triggered by a syscall testing robot.
In order to avoid the warning, this commit limits the number of targets to
1048576 and the size of the parameter area to 1073741824.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The OEM PK HASH registers in the BHI region are read once during firmware
load (boot), cached, and displayed on demand via sysfs. This has a few
problems - if firmware load is skipped, the registers will not be read and
if the register values change over the life of the device the local cache
will be out of sync.
Qualcomm Cloud AI 100 can expose both these problems. It is possible for
mhi_async_power_up() to be invoked while the device is in AMSS EE, which
would bypass firmware loading. Also, Qualcomm Cloud AI 100 has 5 PK HASH
slots which can be dynamically provisioned while the device is active,
which would result in the values changing and users may want to know what
keys are active.
Address these concerns by reading the PK HASH registers on-demand during
the sysfs read. This will result in showing the most current information.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240105174253.863388-1-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
When processing a SYSERR, if the device does not respond to the MHI_RESET
from the host, the host will be stuck in a difficult to recover state.
The host will remain in MHI_PM_SYS_ERR_PROCESS and not clean up the host
channels. Clients will not be notified of the SYSERR via the destruction
of their channel devices, which means clients may think that the device is
still up. Subsequent SYSERR events such as a device fatal error will not
be processed as the state machine cannot transition from PROCESS back to
DETECT. The only way to recover from this is to unload the mhi module
(wipe the state machine state) or for the mhi controller to initiate
SHUTDOWN.
This issue was discovered by stress testing soc_reset events on AIC100
via the sysfs node.
soc_reset is processed entirely in hardware. When the register write
hits the endpoint hardware, it causes the soc to reset without firmware
involvement. In stress testing, there is a rare race where soc_reset N
will cause the soc to reset and PBL to signal SYSERR (fatal error). If
soc_reset N+1 is triggered before PBL can process the MHI_RESET from the
host, then the soc will reset again, and re-run PBL from the beginning.
This will cause PBL to lose all state. PBL will be waiting for the host
to respond to the new syserr, but host will be stuck expecting the
previous MHI_RESET to be processed.
Additionally, the AMSS EE firmware (QSM) was hacked to synthetically
reproduce the issue by simulating a FW hang after the QSM issued a
SYSERR. In this case, soc_reset would not recover the device.
For this failure case, to recover the device, we need a state similar to
PROCESS, but can transition to DETECT. There is not a viable existing
state to use. POR has the needed transitions, but assumes the device is
in a good state and could allow the host to attempt to use the device.
Allowing PROCESS to transition to DETECT invites the possibility of
parallel SYSERR processing which could get the host and device out of
sync.
Thus, invent a new state - MHI_PM_SYS_ERR_FAIL
This essentially a holding state. It allows us to clean up the host
elements that are based on the old state of the device (channels), but
does not allow us to directly advance back to an operational state. It
does allow the detection and processing of another SYSERR which may
recover the device, or allows the controller to do a clean shutdown.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240112180800.536733-1-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Andrii Nakryiko says:
====================
Trusted PTR_TO_BTF_ID arg support in global subprogs
This patch set follows recent changes that added btf_decl_tag-based argument
annotation support for global subprogs. This time we add ability to pass
PTR_TO_BTF_ID (BTF-aware kernel pointers) arguments into global subprograms.
We support explicitly trusted arguments only, for now.
Patch #1 adds logic for arg:trusted tag support on the verifier side. Default
semantic of such arguments is non-NULL, enforced on caller side. But patch #2
adds arg:nullable tag that can be combined with arg:trusted to make callee
explicitly do the NULL check, which helps implement "optional" PTR_TO_BTF_ID
arguments.
Patch #3 adds libbpf-side __arg_trusted and __arg_nullable macros.
Patch #4 adds a bunch of tests validating __arg_trusted in combination with
__arg_nullable.
v2->v3:
- went back to arg:nullable and __arg_nullable naming;
- rebased on latest bpf-next after prepartory patches landed;
v1->v2:
- added fix up to type enforcement changes, landed earlier;
- dropped bpf_core_cast() changes, will post them separately, as they now
are not used in added tests;
- dropped arg:untrusted support (Alexei);
- renamed arg:nullable to arg:maybe_null (Alexei);
- and also added task_struct___local flavor tests (Alexei).
====================
Link: https://lore.kernel.org/r/20240130000648.2144827-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a bunch of test cases validating behavior of __arg_trusted and its
combination with __arg_nullable tag. We also validate CO-RE flavor
support by kernel for __arg_trusted args.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130000648.2144827-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add __arg_trusted to annotate global func args that accept trusted
PTR_TO_BTF_ID arguments.
Also add __arg_nullable to combine with __arg_trusted (and maybe other
tags in the future) to force global subprog itself (i.e., callee) to do
NULL checks, as opposed to default non-NULL semantics (and thus caller's
responsibility to ensure non-NULL values).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130000648.2144827-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to mark arg:trusted arguments with optional arg:nullable
tag to mark it as PTR_TO_BTF_ID_OR_NULL variant, which will allow
callers to pass NULL, and subsequently will force global subprog's code
to do NULL check. This allows to have "optional" PTR_TO_BTF_ID values
passed into global subprogs.
For now arg:nullable cannot be combined with anything else.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130000648.2144827-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for passing PTR_TO_BTF_ID registers to global subprogs.
Currently only PTR_TRUSTED flavor of PTR_TO_BTF_ID is supported.
Non-NULL semantics is assumed, so caller will be forced to prove
PTR_TO_BTF_ID can't be NULL.
Note, we disallow global subprogs to destroy passed in PTR_TO_BTF_ID
arguments, even the trusted one. We achieve that by not setting
ref_obj_id when validating subprog code. This basically enforces (in
Rust terms) borrowing semantics vs move semantics. Borrowing semantics
seems to be a better fit for isolated global subprog validation
approach.
Implementation-wise, we utilize existing logic for matching
user-provided BTF type to kernel-side BTF type, used by BPF CO-RE logic
and following same matching rules. We enforce a unique match for types.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240130000648.2144827-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Let command line option "fred" accept multiple options to make it
easier to tweak its behavior.
Currently, two options 'on' and 'off' are allowed, and the default
behavior is to disable FRED. To enable FRED, append "fred=on" to the
kernel command line.
[ bp: Use cpu_feature_enabled(), touch ups. ]
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-9-xin3.li@intel.com
If the external phy working together with phy-omap-usb2 does not implement
send_srp(), we may still attempt to call it. This can happen on an idle
Ethernet gadget triggering a wakeup for example:
configfs-gadget.g1 gadget.0: ECM Suspend
configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup
...
Unable to handle kernel NULL pointer dereference at virtual address
00000000 when execute
...
PC is at 0x0
LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc]
...
musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core]
usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether]
eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c
dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4
sch_direct_xmit from __dev_queue_xmit+0x334/0xd88
__dev_queue_xmit from arp_solicit+0xf0/0x268
arp_solicit from neigh_probe+0x54/0x7c
neigh_probe from __neigh_event_send+0x22c/0x47c
__neigh_event_send from neigh_resolve_output+0x14c/0x1c0
neigh_resolve_output from ip_finish_output2+0x1c8/0x628
ip_finish_output2 from ip_send_skb+0x40/0xd8
ip_send_skb from udp_send_skb+0x124/0x340
udp_send_skb from udp_sendmsg+0x780/0x984
udp_sendmsg from __sys_sendto+0xd8/0x158
__sys_sendto from ret_fast_syscall+0x0/0x58
Let's fix the issue by checking for send_srp() and set_vbus() before
calling them. For USB peripheral only cases these both could be NULL.
Fixes: 657b306a7b ("usb: phy: add a new driver for omap usb2 phy")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Follow the example of the rest of the QMP PHY drivers and move SGMII PCS
registers to a separate header file.
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-8-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Qualcomm SGMII SerDes PHY is a QMP PHY. As such, it uses standard
registers for QSERDES COM/RX/TX regions. Use register defines from the
existing headers.
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-7-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
All PHYs supported by qmp-usb-legacy driver don't have issues with the
PCS region. Replace qmp_usb_legacy_iomap() with devm_of_iomap().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-2-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
All PHYs supported by usb-legacy have two lanes. Drop support for
single-lane configuration.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad DYbcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-1-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can
have up to 32 threads per instance. J721S2 has two instances of the
subsystem, so there are 64 threads total, Add them to the endpoint map.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240125111449.855876-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing function k3_udma_glue_request_remote_rx_chn() supports
requesting an RX DMA channel and flow by the name of the RX DMA channel.
Add support to request RX DMA channel for a given thread ID in the form of
a new function named k3_udma_glue_request_remote_rx_chn_for_thread_id().
Also, export it for use by drivers which are probed by alternate methods
(non device-tree) but still wish to make use of the existing DMA APIs. Such
drivers could be informed about the thread ID corresponding to the RX DMA
channel by RPMsg for example.
Since the new function k3_udma_glue_request_remote_rx_chn_for_thread_id()
reuses most of the code in k3_udma_glue_request_remote_rx_chn(), create a
new function named k3_udma_glue_request_remote_rx_chn_common() for the
common code.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-5-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing function k3_udma_glue_request_tx_chn() supports requesting
a TX DMA channel by its name. Add a new function to request TX DMA channel
for a given thread ID, named k3_udma_glue_request_tx_chn_for_thread_id().
Also, export it for use by drivers which are probed by alternate methods
(non device-tree) but still wish to make use of the existing DMA APIs. Such
drivers could be informed about the thread ID corresponding to the TX DMA
channel by RPMsg for example.
Since the new function k3_udma_glue_request_tx_chn_for_thread_id() reuses
most of the code in k3_udma_glue_request_tx_chn(), create a new function
for the common code, named k3_udma_glue_request_tx_chn_common().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240124124319.820002-4-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>